If a column is defined as NUMBER(5,2), which of the following is true?
The column can store a total of 7 digits, with 5 on the left side of the decimal point, and 2 on the right.
The column can store a total of 7 digits, all of them on the right side of the decimal point.
The column can store a total of 5 digits, with 3 on the left side of the decimal point, and 2 on the right.
The column can store a total of 5 digits, all of them on the left side of the decimal point.

The square feet of roof area that can be covered by one square of these shakes is 75%. The correct option D.

The condition of the atmosphere, including its temperature, pressure, wind, humidity, precipitation, and cloud cover, is referred to as the weather. It is distinct from climate, which is the average of all weather events for a certain location over a period of around 30 years.

Given Data,

Size of shakes = 24” x 3/8”

Weather exposure = 7 ½”

As explained above, 24” x 3/8” shakes with 7 ½” weather exposure has coverage of 75 square feet per square of shakes. 75 square feet

Therefore, the correct option D. 75%.

To learn more about weather, refer to the link:

https://brainly.com/question/22432988

#SPJ1

The question is incomplete. Your most probably complete question is given below:

The shakes will be applied with an average spacing of '/>" between shakes, and the weather exposure will be 71/2". Look at the shake coverage table. According to the information in this table, approximately how many square feet of roof area can be covered by one square of these shakes?

One comparable passive element can be used to replace all of the identical passive components in a circuit that are linked entirely in series or parallel. This circuit is hence referred to as an equivalent circuit.

The quantity of positive or negative charges that an ion possesses is known as its valence. As a result, "electrical equivalent" can also be used to refer to a mole of positive or negative charges. Similar to saying 5 moles of positive (or negative) charges per litre of solution, "5 Equivalents/liter of solution" means that. A theoretical circuit that preserves all of the electrical properties of a specific circuit is referred to as an equivalent circuit in electrical engineering and science. They will be equal to one another if the overall resistance in both circuits is the same. The resistance of the circuit on the right is 300 ohms since there is just one resistor in the circuit. Two resistors are linked in series in the circuit on the left.

To learn more about equivalent circuit click the link below:

brainly.com/question/15977074

#SPJ4

Thermal limit establishes a short line's loadability.

What Constrains the Capability of Loading? Thermal: The ground clearance, conductor condition, ambient temperature, wind speed, and wind direction all affect an overhead line's thermal capacity. Due to the unstable environment and the history of loading, it may vary by a factor of 2 to 1.

By moving the blinder closer to the origin, the increase in loadability can be controlled. Only when the measured impedance falls between the relay's mho characteristic and the two blinders will the relay trip. Along the load line, the increase in loadability can be measured.

To know more about loadability visit :-

https://brainly.com/question/13521443

#SPJ4

To find the current flow through each resistor in a combo circuit, you need to use Ohm's law and the principles of electrical circuits.

To learn more about Combo Circuit refer to:

https://brainly.com/question/14628398

#SPJ1

The type of wrench that surrounds and grips all corners when loosening and tightening bolts and nuts is known as box-ends.

Wrenches are significantly used for loosening and tightening of fasteners. These are typically a kind of tool that is used to provide grip and mechanical advantage in applying torque to turn objects—usually rotary fasteners, such as nuts and bolts—or keep them from turning.

According to the context of this question, there are basically two major kinds of wrenches: Pipe wrenches used in plumbing for gripping round (cylindrical) things. General-use wrenches are used on nuts and bolts that have flat, parallel surfaces; e.g., square or hexagonal (hex).

Therefore, box-ends are a type of wrench that surrounds and grips all corners when loosening and tightening bolts and nuts.

To learn more about Technological tools, refer to the link:

https://brainly.com/question/25860017

#SPJ1

The Region of Convergence is the area in the pole/zero plot of the transfer function in which the function exists.

The ROC of the Laplace transform X(s) for a left-sided signal x(t) is Re(s)2, where 2 is a constant. As a result, the ROC of a left-sided signal's Laplace transform lies to the left of the line =2. Receiver Operating Characteristic is what the word "ROC" refers to. Following the assault on Pearl Harbor in the 1940s, ROC curves were initially used to explore discriminator systems for the detection of radio signals in the presence of noise. The area of convergence is the set of values in the z-plane for which the ZT converges (ROC). S is a similar laplace variable, and its ROC is the value at which integration converges.

To learn more about Convergence click the link below:

brainly.com/question/15415793

#SPJ4

A function template allows a function to accept parameters with different data types

A function can take parameters of various data types thanks to a function template. You may build a single function definition that is compatible with several distinct data types by using function templates. the function produced from a function template by the compiler (generic function). The compiler will create an int function when we compile this code by using a reference from the template function. One or more type parameters can be specified in a class template and utilised throughout the class as needed. The template-parameters of the class template must come first, followed by the template-parameters of the member template, when specifying a member template of a class template that is defined outside of its class template specification. Why is a class template's code typically contained in a separate header file

Learn more about Function here:

https://brainly.com/question/17216645

#SPJ4

If there is a problem with the differential case or the ring gear itself, it can be an indicator of whether or not to reuse a ring gear or replace the ring gear.

What is indicator?
The indicator is a typical "auxiliary" instrument whose function is to give a human readable indication of the an instrument signal. Sometimes, process transmitters simply transmit a basic instrument message (4 to 20 mA, etc.) to the another device without having readouts for the variable they are measuring. For example, a level transmitter installed on a large tank will display the level value to the operator just at bottom of the tank utilising indicators as well as loop-powered devices. In some cases, we may need an additional local display to show the process value to a operators. Without needing to connect test equipment, an indicator provides a human operator with a convenient way to see what the transmitter's output is.

If the case is damaged, such as if it has been bent or cracked, it should be replaced. If the ring gear is damaged, such as if it has been chipped or scored, it should also be replaced. If the ring gear is worn but not visibly damaged, it may be possible to reuse it as long as it is inspected and properly re-torqued.

To learn more about indicator
https://brainly.com/question/29664056
#SPJ4

Laser machining is the non-traditional machining process designed to machine hard and brittle workpieces.

In the modern world, the need for precision machining of hard and brittle materials has become increasingly important. This is because many products and components require a high level of accuracy and strength in order for them to function properly. As a result, many machining processes have been developed to meet these needs. One such process is laser machining, which has proven to be an efficient and cost-effective way of machining hard and brittle materials such as glass, sapphire, alumina, ferrite, piezoceramics, quartz, silicon carbide, and technical ceramic.

The benefits of laser machining hard and brittle workpieces are numerous. First, laser machining enables high precision due to the extremely focused nature of the laser beam. Because of this, laser machining can produce intricate shapes and patterns with very tight tolerances. This ensures that parts and components are made to exact specifications. Additionally, the use of a laser beam also eliminates the need for tooling, which can be expensive and time-consuming.

Learn more about Laser machining :

https://brainly.com/question/13621353

#SPJ4

A static method (or static function) is a method that is declared as a member of an object but can only be accessed from the constructor of an API object, not from an instance of the object generated using the constructor.

Rather of being an instance of a class, a static method in Java is a method that is a part of the class itself. The method is available to each instance of the class. Without requiring the class's object, static methods have access to class variables (static variables) (instance). A static method can only access static data. A static method in Java is a method that is part of the class, not an instance of the class. Instead of using a class object, static methods are called by the class name. There should be a common piece of code shared by all instance methods (although you could still have an instance method for that).

To learn more about static method click the link below:

brainly.com/question/13098297

#SPJ4

Answer:

All of the statements regarding sensors are true. Sensors are input devices that respond to some external stimuli, and they can be either analog or digital.

please mark as brainliest!

Explanation:

Ball is 2.04 sec in the air after it will undergoes free fall, Max height 20.14 m and after  0.99 sec the ball 15m above the ground.

The most basic principles of an object's motion are described by kinematics equations of motion. These equations control an object's motion in 1D, 2D, and 3D. They make it simple to compute expressions like an object's position, velocity, or acceleration at different points in time.

At max height, V=0.

So:

v=u+at

0=20–9.8t

9.8t=20

t=2.04 secs…

Ball is 2.04 sec in the air after it will undergoes free fall.

s = ut + ½ at^2

=20* 2.04  - (9.8 * 2.04² / 2)

= 40.8 - 20.39

= 20.41 m

Max height 20.14 m

ball 15m above the ground:

v^2 = u^2 + 2 as.

= 20^2 - 2 * 9.8 * 15

= 400- 294

=106

v = [tex]\sqrt{106}[/tex] =10.3 m/s

v=u+at

10.3 = 20 -9.8 * t

t = (20 -10.3) /9.8 = 0.99 sec

at 0.99 sec the ball 15m above the ground.

To learn more about acceleration refer,

https://brainly.com/question/27821888

#SPJ4

The right order of the flags from the given list after each statement  executes is  (1,2,3)

what is order?

Order is a state of organized, systematic arrangement or sequence. It is the way in which a group of objects, items, or things are arranged or organized according to a specific set of principles or rules.

Order is commonly found in nature, in art, in music, in mathematics, in society, and in other areas. It helps to create a sense of purpose, structure, and organization in a variety of contexts.

Order can also refer to a sense of control, as when someone is in a position of authority or power. In this way, order is often seen as a form of discipline or regulation that allows for things to be done in a structured, efficient, and predictable fashion.

To learn more about order
https://brainly.com/question/17169621
#SPJ4

Answer:

c.revolutionary

Explanation:

"Revolutionary" is not a type of software prototyping. Software prototyping is the process of creating a preliminary model or version of a software program to test its functionality and gather feedback. There are several different types of software prototyping, including static, throwaway, and incremental, but "revolutionary" is not one of them.

Thus external torque is -146.76 Nm and it is clockwise

Scalar moment = load × moment arm

Load acting on the body is due to HAT and object

External torque on joint is

[(HAT load) × (HAT moment arm)] + [(object load) × (object moment arm)]

(both moments are in clockwise direction)

Or external torque = -[(333 × 0.22) + (245 × 0.3)] = -146.76 Nm

Thus external torque is -146.76 Nm and it is clockwise.

This is so because the force and speed of the pistons' motion determine the torque. High levels of this torque force can be produced by the fastest cars at relatively low rpm. This enables speedy acceleration of the vehicle. The definition of torque is rF=rFsin(r). In other terms, torque is the cross product of the force vector and the distance vector, where 'a' is the angle between r and F. The distance vector represents the distance from the pivot point to the place where force is applied.

Learn more about torque here:

https://brainly.com/question/6855614

#SPJ4

Answer:

Photogenerated entangled electron spin pairs provide a versatile source of molecular qubits. Here, we examine the spin-dependent dynamics of a covalent donor–acceptor–radical molecule, D-A-R•, where the donor chromophore (D) is peri-xanthenoxanthene (PXX), the acceptor (A) is pyromellitimide (PI), and the radical (R•) is α,γ-bisdiphenylene-β-phenylallyl (BDPA). Selective photoexcitation of D within D-A-R• in

In order for analysts to find links between searches, anonymization functions remove specific identifying information from query results, such as last name and phone number, but create some sort of unique identifier.

Data anonymization is the process of obscuring or encrypting identifiers that link a specific person to stored data in order to protect private or sensitive information. For instance, you can use a data anonymization technique to keep the data while obscuring the source for Personally Identifiable Information (PII) like names, social security numbers, and addresses.

Attackers can employ de-anonymization techniques to track the anonymization process even after you have removed all identifiers from the material. De-anonymization procedures can cross-reference the sources and reveal personal information because data typically goes through numerous sources, some of which are accessible to the public.

Know more about Attackers here:

https://brainly.com/question/28232298

#SPJ4

For a brick veneer that bears on the foundation and continues to the top of the building without any intermediate bearing support, the maximum veneer height is limited to 30 ft.

Veneer (English for Furnier) or Verblendschale is a thin, light-transmitting ceramic covering for the teeth that is applied to the dental surface, particularly on front teeth, using specialty adhesive. The use of ceramic veneers often has no health risks, save from rare allergic reactions to the befestification material, as the ceramic material has a very high biocompatibility. Problems only arise with extensively fluoridated dental paste. Additionally, the necessary integration measures raise the possibility of chronic pulmonitis (Zahnmarkentzündung), which the doctor must disclose. Veneers can be used to fix minor dental issues such gaps in the teeth, discoloured teeth, and localized blemishes. Veneers provide teeth's visible surfaces with an improved appearance. Usually, when they are used, old plastic fillers or corner builders are removed.

Learn more about veneer here

https://brainly.com/question/14448389

#SPJ4

Answer:

MATLAB function:

function dosageAmount=CalculateDosage(userWeight)

% user weight is in kg

dosageAmount=0;

% clears the variable dosageAmount

if userWeight<50

dosageAmount=10;

elseif userWeight <= 140

dosageAmount=20;

else

dosageAmount=30;

end

end

Code: >> CalculateDosage(65)

Refer to the image for more

Allow workers to go without the necessary safety gear.

To learn more about Steel Mill Inc. refer to:

https://brainly.com/question/29426067

#SPJ4

fabrication to fabricate or create anything untrue with the intent to deceive: He made up an explanation because he was late to stay out of trouble. He alleges that false evidence was used against him by the police. notably the US.

Construction of goods utilizing a combination of generally standardized elements and one or more distinct procedures is known as fabrication. For instance, steel fabrication involves creating metal structures using a variety of techniques, including cutting, bending, and assembling. The following are some instances of fabrication or falsification: producing data artificially when it should be coming from a real experiment Unauthorized tampering with or fabrication of information, texts, pictures, audio, video, music, or other works. Welders weld two pieces of metal together or patch gaps in metal by heating the metal and creating a bond. Usually, when the metal cools, the link solidifies entirely.

To learn more about fabrication click the link below:

brainly.com/question/28920453

#SPJ4

The Diffie-Hellman key exchange (DHKE) protocol is a method for securely exchanging a cryptographic key over an unsecured communication channel. In the DHKE protocol, Alice and Bob agree to use a specific Galois field, GF(2^m), and a primitive element, a, for their key exchange. In the case given, GF(25) is used and the primitive element is a = x^2.

To compute bA, Alice first needs to compute a^3 (since her private key is 3) and then raise that value to the power of 12 (since b = 12). In GF(25), the multiplication operation is performed by adding the exponents of the two field elements being multiplied and then taking the result modulo 25 (since the field polynomial is x^5 + x^2 + 1, the degree of the polynomial is 5, so the result of any multiplication operation must be less than 25).

First, we compute a^3 by taking the exponent of a (which is 2) and multiplying it by 3 mod 25:

a^3 = (a^2)^3 = (x^2)^3 = x^6 = x^1 = x

Next, we compute bA by taking a^3 and raising it to the power of 12 mod 25:

bA = (a^3)^12 = (x^1)^12 = x^12 = x^2 = a

Thus, the final value of bA is a.

To compute bB, Bob first raises the primitive element a to his private key b to obtain the shared secret:

bB = a^b = (x^2)^12 = x^24 = x^4

Since we are working in GF(2^5) with the irreducible polynomial P(x) = x^5 + x^2 + 1, we need to reduce the degree of x^4 modulo P(x) to obtain the final shared secret:

x^4 = (x^5 + x^2 + 1)q(x) + x^3 + x^2 + x + 1

Therefore, the shared secret bB = x^3 + x^2 + x + 1.

Learn more about DHKE protocol, here https://brainly.com/question/29376731

#SPJ4

When a network is connected using a physical bus topology and a cable that connects a workstation to the bus breaks then no devices will be able to communicate.

What is a bus topology?

A type of network design known as bus topology, often referred to as line topology, connects all devices in the network with a single coaxial or RJ-45 network wire. The term "bus," "backbone," or "trunk" refers to the single wire that connects all of the devices and transmits all of the data.

Bus topology is one of the simplest physical topologies used in networks, according to the definition. Famously, the Local Area Network uses the bus topology. All of the nodes in this topology are linked together by a single wire known as the "Backbone."

To learn more about a bus topology, use the link given
https://brainly.com/question/13501206
#SPJ4

It is true that material requirements planning (mrp) converts the master production schedule into the needs for parts, subassemblies, and raw materials.

To learn more about Material requirements planning (mrp) refer to:

https://brainly.com/question/14969752

#SPJ4

The estimated weight of a round brilliant is a. 1.83 cts.

Brilliant has many shape and to calculate the weight of brilliant has different formulas from one shape to another shape. Since, this case use round brilliant then the formula is,

weight = average diameter * average diameter * depth * 0.0061

= 7.25 * 7.25 * 5.45 * 0.0061

= 1.7474

Then, weight of a brilliant is also affected by its girdle thickness. For girdle thickness very thick and average diameter 7.25 mm we will multiply the previous result by 1.045. (use girdle thickness table to know the multiply value)

weight = 1.7474 * 1.045

= 1.826

= 1.83 carats

Learn more about weight here:

brainly.com/question/28441422

#SPJ4

The correct option is d) tmp = a/(nothing). A free service called "temp mail" enables users to receive emails at any random temporary address.

Temps or Temps can mean: Temporary file for temperature, in computing, file for the moment, a transient variable, Audio used during editing for TV and film production is known as a "temp track," "temp score," or "temp music." A temp is someone who works on a temporary basis. Temporary refers to a length of time that a person whose exact lifespan is unknown spends. Russian Kotelny Island's Temp (air base). A meteorological code for upper air soundings is TEMP (meteorology). Plan for testing and assessment in project management, Persol Holdings, a Japanese human resource management firm that was formerly known as Temp Holdings, RT-21 Temp 2S, a Soviet intercontinental ballistic missile, and TR-1 Temp, a Soviet mobile theatre ballistic missile

Learn more about temp here

https://brainly.com/question/25792566

#SPJ4

What code for XXX, YYY correctly swaps a and b? Choices are written as XXX / YYY.

XXX;

a = b;

YYY;

b = tmp;

Question options:

a) tmp = a / (nothing)

b) tmp = a / tmp = b

c) tmp = b / (nothing)

d) (nothing) / tmp = a

Here is a sample of how the server would be implemented

import java.io.*;

import java.net.*;

import java.util.*;

public class Server {

   public static void main(String[] args) {

       WordSearcher searcher = new WordSearcher();

       try {

           // Bind server socket to a port

           ServerSocket serverSocket = new ServerSocket(1236);

           System.out.println("Server socket created, waiting for clients...");

           while (true) {

               // Accept client connection

               Socket clientSocket = serverSocket.accept();

               System.out.println("Client connected: " + clientSocket.getInetAddress());

               // Set up input and output streams

               BufferedReader in = new BufferedReader(new InputStreamReader(clientSocket.getInputStream()));

               PrintWriter out = new PrintWriter(clientSocket.getOutputStream(), true);

               // Read in string from client

               String inputString = in.readLine();

               // Pass string to WordSearcher object and receive list output

               List<Integer> positions = searcher.search(inputString);

               // Transmit list to client

               for (Integer position : positions) {

                   out.println(position);

               }

               // Close connection

               clientSocket.close();

           }

       } catch (IOException e) {

           e.printStackTrace();

       }

   }

}

The implementation binds a server socket on port 1236 and listens for client connections. When a client connects, it sets up an input stream and an output stream for communicating with the client. It then reads a string from the client, passes it to a Word Searcher object to search for words, and sends a list of resulting positions to the client. Finally the connection is closed and it loops back to wait for the next client connection.

To include a special "shutdown" command, loop checking for that command, then break out of the loop and close the server socket when the command is received. One can also use a flag variable that is set to true when the shutdown command is received, and use that flag to break out of the loop.

Read more about loops on brainly.com/question/29586204

#SPJ4

Urbanization increases the amount of impervious surface in a given area, which often slows down hydrologic response time and so raises the danger of flooding.

While impermeable rocks prevent water from passing through pores and fissures, permeable rocks do. Because there is more surface run-off when a valley is built of impermeable rocks, flooding is more likely. excessive rain. arriving ocean waves, such as a storm surge. ice jams, melting snow, and melting ice. Levees or dams breaching India is unique in that the monsoon season brings with it a lot of rain. Numerous rainy weather systems can also be found elsewhere. Coastal communities and villages may also be impacted by storm surges. Dams can have serious consequences when water is released suddenly or when it is not released at all.

To learn more about Urbanization click the link below:

brainly.com/question/14467886

#SPJ4

If Ellie is elected without debating the incumbent, then Herbie will not be elected as he has not had the chance to debate the incumbent.

What do you mean by incumbent?

Incumbent is a term often used in politics and business to refer to a person who holds an office or position. In politics, it refers to the person currently in office, such as the current president or prime minister. In business, it refers to the current holder of a position, such as the CEO or chairman of a company. It can also refer to the current holder of any title or position.

The use of the term incumbent Incumbent is a term often used in politics and business to refer to a person who holds an office or position. In politics, it refers to the person currently in office, such as the current president or prime minister. In business, it refers to the current holder of a position, such as the CEO or chairman of a company. It can also refer to the current holder of any title or position.

The use of the term incumbent suggests that the holder of the position has a certain that the holder of the position has a certain authority or status. This can be used to indicate the importance of a position, or to emphasize the current holder's qualifications. It can also be used to refer to someone who has an advantage in a particular situation.

However, if Herbie does debate the incumbent without being elected, then he may still be able to gain more support from the voting public and even potentially win the election.

To learn more about incumbent
https://brainly.com/question/28995570
#SJP4