The rope's force on the car, in terms of magnitude, is [tex]8.3 *10^{3}[/tex] N
A man ties a rope firmly around the front bumper of his car and an 18-meter utility pole in an effort to free it from the mud. Then, with a force of 550 n, he pushes sideways on the rope at its middle, shifting the rope's center by 0.30 m, but the automobile scarcely moves.
At first, we evaluate the angle, then with its help of it, we shall evaluate the magnitude of the force.
Measured from the dotted line, the angle of each rope half is
θ = [tex]tan^{-1} (\frac{0.30m}{9.0m} )= 1.9[/tex]
When we examine the forces at the "kink" (where F is applied), we discover
t = 2sinθ/F = 2sin1.9/550 = [tex]8.3 *10^{3}[/tex] N
The rope's force on the car, in terms of magnitude, is [tex]8.3 *10^{3}[/tex] N
To read more about forces, visit https://brainly.com/question/13191643
#SPJ4
The magnitude of the force on the car from the rope is 8.3*10³ N
Force is the amount of energy applied to displace the position of any object. This force has magnitude and direction and so is called the vector quantity.
Here, in this question,
Given,
Distance = 18 m
Midpoint force = 550 N
Displacement of the center of the rope = 0.30 m
The rope when tied then it will also show a force which is the tension force (t).
We know that tension t
t = 2sinθ / F
But we are not aware about the value of θ
so
we will first find the value of θ by
θ = tan⁻¹(0.30/0.9) = 1.9
We got the angle to be 1.9, now we can easily find the force in the rope as
t = 2 sin 1.9 / 550
= 8.3 * 10³ N
Therefore, the magnitude of the force on the car from the rope is 8.3*10³ N.
To know more about force, refer: https://brainly.com/question/13314666
#SPJ4
How can a dilute solution of salt in water be made more concentrated?
Answer:
Heating it
Explanation:
Helps the salt dissolve faster and is more effective when heated up :)
The answer is A. by heating it
In a Geiger tube the total time taken to create a pulse and then let the electrons recombine with the ions to again form a neutral state is about
A. 1 μs
B. 30 μs
C. 300 μs
D. 10,000 μs
In a Geiger tube, the total time taken to create a pulse and then let the electrons recombine with the ions to again form a neutral state is about C. 300 μs
How to calculate the ions?As we know that in G. M. Counter, slow positive ion takes 100μs to reach at cathode. If in this time, any other ion enters then no recording of this ion , known as dead time after this time also counter takes 100μs more, known as recovery time.
The sum of these times know as paralysis time of gm counter will be:
= (100+100+100)
= 300 μs.
Based on the information, the correct option is C.
Learn more about electrons on:
https://brainly.com/question/25674345
#SPJ1
A 66.9 kg diver steps off a 6.07 m tower and drops straight down into the water. If he comes to rest 2.96 m below the surface of the water, determine the average resistance force exerted on the diver by the water.
The average resistance force exerted on the diver by the water is 2,000 N
According to the law of conservation of energy, the mechanical energy is constant.
Mechanical energy (EM) is equal to the kinetic energy (Ek) + potential energy (Ep).
In the given problem, the diver comes to rest at 2.96 m below the surface of the water. Hence, at this point, his velocity is zero, so is its kinetic energy. Therefore, according to the law of conservation of energy:
ΔE = - mg (h₂ - h₁)
Where:
m = mass of the diver
g = gravitation due to gravity
h = height
Hence,
ΔE = - 66.9 x 9.8 x (-2.96 - 6.07)
= 5920.25 Joule
This is equivalent to the work done by the resistance force.
Hence,
W = ΔE = F . s
Where:
s = distance under water
Hence,
5920.25 = F x 2.96
F = 5920.25 / 2.96 = 2,000 N
Learn more about energy conservation here:
https://brainly.com/question/27422874
#SPJ4
For each of the following, create a DFA that recognizes exactly the language given. (a) [5 points) Binary strings with at least two ls. (b) [5 points) Binary strings that have at least one 1 and an even number of Os. (c) [5 points) Binary strings such that none of their runs of ls have odd length. A run of ls is a substring consisting of all 1s (i.e. "11..-1") that is either at the beginning of the string, or at the end of the string, or in the middle of the string, surrounded by Os. For example, the following strings are included in the language: "11","110","00001111", and "011001111011". But the following strings are not included in the language because they all contain at least one run of ls with odd length: "111", "010", and "00110111".
A binary string is a sequence of bytes. Unlike strings, which typically contain textual data, binary strings are used to contain non-traditional data such as images. The answer is in Images.
Binary string length is the number of bytes in the sequence. Binary strings have a CCSID of 65535. A binary string is a series of bytes. Unlike strings which usually contain text data binary strings are used to store data such as image sounds and mixed media.
A binary string is a series of octets. Binary strings are divided into two types of strings. First, binary strings specifically allow the storage of zero-valued octets and other non-printable octets. Each character in the string is defined by a number and that number is encoded in binary like an int. Contains a zero terminator.
Learn more about A binary string here:- https://brainly.com/question/17562822
#SPJ4
consider an earthquake to be a three-dimensional wave traveling through the earth's crust. the intensity of the earthquake passing through the earth is measured to be 11000 j/(m2*sec) at a distance 35 km from the source. the earthquake lasts for 14 seconds. ef picup part description answer save status a. determine the intensity at 1.3 km from the source. (include units with answer) format check click here to check your answer 6.25 pts.75% 2% try penalty 1 hint available
The Energy that can be captured is 8.267*10^7 KwH, Energy produced by earth quake in 11 seconds is 1.86*10^15 J.
What is intensity?
Intensity is the amount of energy a wave carries over a surface of a particular area in a unit of time, and it is the same as the energy density times the wave speed. The most popular unit of measurement is watts per square meter. The strength and size of a wave affect its frequency.
What is earth quake ?
An earthquake is the abrupt release of energy from the earth's crust that causes the earth's surface to shake. Seismic waves, also called S waves, are consequently produced.
I = 11000 J/(m^2 s)
r = 35 km
t = 11 s
a) from the given data
Energy produced by earth quake in 11 seconds
E = I*A*time
= I*4*pi*r^2*t
= 11000*4*pi*(35*10^3)^2*11
= 1.86*10^15 J
using,
log(E) = 4.8 + 1.5*M
log(1.86*10^15) = 4.8 + 1.5*M
==> M = 6.98
b) Energy that can be captured, E_captured = 16% of E
= 0.16*1.86*10^15
= 2.976*10^14
= 2.976*10^14/(3.6*10^6) KwH
= 8.267*10^7 KwH
the number of houses the earthquake could power for a year, N = E/10000
= 8.267*10^7/10000
= 8267
Therefore, Energy that can be captured is 8.267*10^7 KwH, Energy produced by earth quake in 11 seconds is 1.86*10^15 J.
Learn more about intensity from the given link.
https://brainly.com/question/16797771
#SPJ4
the colors in a rainbow are caused by the colors in a rainbow are caused by different amounts of absorption for light of different colors by the water in the raindrops. the interaction of the light reflected from different raindrops. the downward motion of the raindrops. different amounts of refraction for light of different colors by the water in the raindrops.
Varying degrees of refraction for various colours of light by the water in raindrops.
What is absorption ?
A chemical or physical phenomena known as absorption occurs when molecules, atoms, and ions from the substance being absorbed move into the bulk phase (gas, liquid, or solid) of the medium in which they are being absorbed.
What is reflected ?
When a wave encounters a barrier between two media, it will abruptly change direction and reflect. The approaching wave disturbance, at least in part, stays in the same medium.
Different amounts of refraction for light of different colors by the water in the raindrops. because, the amount of light will under go refraction, internal reflection and dispersion.
Therefore, option (d) is correct.
Learn more about from the given link.
https://brainly.com/question/26061959
#SPJ4
the in situ moisture content of a soil is 15% with saturation level equal to 70% and void ratio of 0.9. the specific gravity of soil solids is 2.75. this soil is to be excavated and transported to a construction site for use in a compacted fill. if the specifications call for the soil to be compacted
This soil is to be excavated and transported to a construction site for use in a compacted Volume fill is 8680.73 m³
The specific gravity of solids = 2.75
situ moisture content of a soil is 15% with saturation level equal to 70% and void ratio of 0.9.
Dry weight = 103.5
Yd = 16.5/(1 + 18/100) = 14.34KN/m³
Volume of soil to be excavated to produce 7651m³
V = Yd compacted / Yd insite × compacted fill volume
V = 16.27/14.34 × 7651 = 8680.73 m³
No of trucks = V × Yinsity / 1.78 = 8680 × 16.5/178 = 826trucks.
Using the human body, such as by pinching or measuring an object's volume using the size of your hand, is the most traditional method of doing so. The human body, however, is incredibly unpredictable due to its differences. A more accurate technique to measure volume is to utilize fairly constant and long-lasting natural objects, like gourds, sheep or pig stomachs, and bladders. Small volumes are typically measured using standardized human-made containers today since metallurgy and glass manufacture have advanced through time. [3]: 393 By using a multiple or portion of the container, this approach is frequently used to measure small volumes of fluids or granular materials. To create a nearly flat surface, the container is shook or leveled off for granular items. The most exact approach to measure is not with this technique.
Learn more about Volume here:
https://brainly.com/question/17322215
#SPJ4
based on these insights, you create your primary message. which of the following reflect the expectations of a primary message? A
Although electric vehicle sales demand is on the rise, low availability of charging stations and short battery range are significant hurdles that Gaea must overcome
B
Electric vehicle sales demand is expected to grow by more than 400% by 2025. However, the number of publicly available vehicle charging stations is a significant factor in consumer buying decisions. Currently, there are many locations with so few charging stations that electric car owners would run out of power when traveling between stations. Vehicle battery range is also a significant factor for consumers. In 2020, the average battery range was 210 miles. However, the vast majority of people say they will not buy an electric car until the battery range is at least 300 miles per charge
C
Electric vehicle demand is skyrocketing
D
The number of publicly available vehicle charging stations is a significant factor in consumer buying decisions. Therefore, Gaea must begin building vehicle charging stations
The insights to be used in creating a primary message is that; Electric vehicle demand is skyrocketing. Option C
What are electric vehicles?We can see that the demand for electric vehicles has increased in the recent times. Why has the demand for electric vehicles increased? We know that in the recent times there has been a push for the use of cleaner energy.
This has made a strong impressions upon governments around the would and has led to an increase in the rate at which any kind of research that tries to fund the use of devices that use alternative energy to fossil fuels is concerned.
As a result of this, there has been an increase in the demand and the use of the electric vehicles especially in the developed countries where more people can be able to afford the vehicles.
Learn more about electric vehicles:https://brainly.com/question/28174365
#SPJ1
a soccer player kicks a soccer ball of mass 0.45 kg that is initially at rest. the player's foot is in contact with the ball for 1.90 * 10^-3 s, and the force of the kick is given by f(t)
We set the derivative of F with respect to time equal to zero and solve for t since J=F avg t. The outcome is t=1.5103 s. It is clear that the force, F(t), reaches its maximum at t=0.0015s, with Fmax equal to 4500N.
How do you determine the force required to kick a ball?The formula Force (F) = Mass (M) x Acceleration (A), where the units are F (Newton) = Mass (kg) x Acceleration (m/s2), is used to determine the force of a kick.
What are the forces at work while kicking a soccer ball?The force exerted by the foot on the football during a kick is referred to as the action force. On the other side, the response force is the pressure the ball places on the foot. Because the action force and reaction force are of equal magnitude, no force is stronger than the other.
to know more about Force here:
brainly.com/question/26115859
#SPJ4
determine the displacement of a plate of length l pinned at its ends with a concentrated load vs applied at its center. This problem is illustrated in Figure 3–9.
The radius of gyration will be k = (h2/12)1/2 , or k2 = h2/12.
What is radius?
The radius of a circle is the distance a circle's center from any point along its perimeter. Usually, "R" or "r" is used to indicate it.
What is displacement ?
The term "displacement" describes the shortest path an object takes to travel from one spot to another. It is understood to be the modification of the object's position, to put it simply. Its magnitude and direction make it a vector quantity.
Radius of Gyration is given by, k = (I/M)1/2; Where I = Moment of Inertia of the body and M is its mass.
Now, for a plate of rectangular cross-section of height h and width b, the area moment of inertial about horizontal midline is given by, I = Mh2/12 .
Hence, the radius of gyration will be k = (h2/12)1/2 , or k2 = h2/12.
Learn more about radius from the given link.
https://brainly.com/question/12908707
#SPJ4
Which of these is NOT a vector quantity?
O rotational kinetic energy
tO ranslational momentum
O velocity
O angular momentum
O acceleration
Answer: Rotational kinetic energy is not a vector quantity
Explanation:
Vector A volume that requires both magnitude and direction to be fully defined is called a vector.
Kinetic Energy It's defined as the energy held by a body when it's in stir,i.e haste isn't 0. When haste is 0, Kinetic Energy is basically 0.
Kinetic Energy is given by
K = 1 2 m v 2
where m = mass, v = haste.
Mass is a scalar volume and the haste which is a vector is squared which makes it a scalar volume as well. thus, Kinetic Energy is a scalar.
To know more about scalar or vecto quantity visit:://brainly.com/question/275630
A vertical plate is submerged in water and has the indicated shape. Find a Riemann sum that describes the hydrostatic force against one side of the plate. Then, write the sum as an integral and evaluate it.The pressure of a fluid that is exerted on an object due to its gravity is called hydrostatic pressure. Mathematically hydrostatic pressure is represented as P=rhogh. The hydrostatic force is calculated by multiplying the hydrostatic pressure with the area.
The hydrostatic force is calculated by multiplying the hydrostatic pressure with the area is 6000lb.
What is hydrostatic force ?
A hydrostatic force is the outcome of a liquid's pressure loading when it acts on submerged surfaces. Calculating the hydrostatic force and determining the Centre of pressure are two important concepts in fluid mechanics.
What is gravity ?
A planet or other body's gravity draws objects toward its centre. The force of gravity keeps all the planets in their orbits around the sun.
The area of the strip is calculated as follows
Astrip = 6dy
Pstrip = pgy
Here, the density of water is p, the acceleration due to gravity is g and the vertical height of the strip from free surface of water is y.
The weight density of water is
Pg= 62.5 lb/ft3
The hydrostatic force again one side of the plate is calculated as follows.
F hydrostatic = ∫ P strip A strip
Substitute all the values in the above equation and integrate.
F hydrostatic = ∫ (pgy) (6dy)
F hydrostatic = ∫6pg ydy
F hydrostatic = 6pg y²/2
F hydrostatic = 6pg (6²/2 – 2²/2)
F hydrostatic = 6 X 62.5 (6²/2 – 2²/2)
F hydrostatic= 6000 lb
Therefore, hydrostatic force is calculated by multiplying the hydrostatic pressure with the area is 6000lb.
Learn more about hydrostatic pressure from the given link.
https://brainly.com/question/12933026
#SPJ4
A 10-cm-long spring is attached to the ceiling. When a 2.0 kg mass is hung from it, the spring stretches to a length of 15 cm.
What is the spring constant k? Answer for this already found= 392 N/m
1) How long is the spring when a 6.0 kg mass is suspended from it?
The spring is 20cm long when a 6.0 kg mass is suspended from it.
What is Hooke's Law's spring constant, k?K stands for the proportionality constant, commonly referred to as the "spring constant." In layman's words, stiffness and strength are shown by the k variable in Hooke's law (F = -kx). An object requires more force to be stretched to a specific length the greater the value of k.
F=-kx
“-ve" is for the direction of motion
K=F/x
Dimensions of F=[MLT-²]
Dimensions of x=[L]
K=[MLT-²]/[L]=[MT-²]
DIMENSIONS OF SPRING CONSTANT IS
[MT-²]
Why do we use the spring constant?The spring constant is calculated by dividing the force required to stretch or compress a spring by the lengthening or shortening of the spring. It is used to identify whether a spring is stable or unstable, and consequently, what system it should be employed in.
Learn more about spring constant here:
brainly.com/question/14159361
#SPJ4
A tank whose bottom is a mirror is filled with water to a depth of 19.3 cm. A small fish floats motionless 7.50 cm under the surface of the water. What is the apparent depth of the reflection of the fish in the bottom of the tank when viewed at normal incidence?
The fish's perceived depth is 5.3 cm, while the fish's picture is 24.8 cm. when observed at normal incidence, the perceived depth of a fish's reflect in the tank's bottom.
What do you deem an incident to be?
A "incidence" is the appearance of new cases of illness or injury within a population over a specific period of time. The amount of new cases in a population is how some public health experts define incidence, however
What distinguishes incidence from prevalence?
In contrast to prevalence, which is the percentage of a population with a particular characteristic, incidence is the number of new cases of a characteristic that appear in a population during a given time frame.
Briefing:
apparent depth=(Na/Nw)*s
=(1.00/1.33)*33cm
=24.8cm
To know more about incidence visit:
https://brainly.com/question/14221826
#SPJ4
during a knee extension exercise there are two forces that are producing torque at the knee joint. one is the quadriceps muscle and the other is the weight at the ankle joint. the quad is capable of producing 500 newtons of force, while the weight at the ankle is 10 kg. the distance from the knee joint to the quad force is 0.05 meters and the distance from the knee joint to the weight is 0.38 meters (these are not the moment arms). the knee is flexed to 125 degrees. draw and calculate the moment arms for each force on the picture below and decide if the joint flexes or extends.
The Moment arm for equal force is 0.0287m, and the torque is -7.041Nm.
What is force ?
Everyday activities like walking, setting something down on a surface, tossing something into the air, and even the tides' regular variations all include the application of force. The result of the interaction between two or more things, a force is a push or a pull.
What is torque ?
The force that may cause an item to revolve along an axis is measured by torque. Similar to how force drives linear kinematics acceleration, torque drives angular acceleration. A vector quantity is torque.
a1 = a cos 55 = (0.38m) cos 55 = 0.218 m
Moment arm for equal force = q1 = q cos 55
= (0.05) cos 55
= 0.0287m
Now Tnet Fq - qT/counter clockwise – Wa a3/ clockwise
Tnet = (500 N) (0.207m) – (98N) (0.218m)
= 14.35Nm – 21.364 Nm
= -7.041Nm
As net torque is negative is weight will pull down the log joint will flex not extend.
Therefore, Moment arm for equal force is 0.0287m, and the torque is -7.041Nm.
Learn more about force from the given link.
https://brainly.com/question/12970081
#SPJ4
when there is a net force exerted on an object, the magnitude of the acceleration of the object is [a] proportional to the magnitude of the net force
When there is a net force exerted on an object, the magnitude of the acceleration of the object is proportional to the magnitude of the net force and has a magnitude that is inversely proportional to the mass.--The statement is true.
Newton's second law of motion states that the acceleration of an object depends upon two variables i.e the net force which is acting upon the object and the mass of the object. The acceleration of an object is dependent directly upon the net force which is acting upon the object, and inversely upon the mass of the object. If the force acting upon an object is increased, the acceleration of the object is increased. If the mass of an object is increased, the acceleration of the object is decreased.
Read more about Newton's second law :
https://brainly.com/question/20357188
The complete question is:
State whether a given statement is True or False.
When a net external force acts on an object of mass m, the acceleration that results is directly proportional to the net force and has a magnitude that is inversely proportional to the mass.
#SPJ4
construction worker Bob IS standing at the top of a slanted rooftop when he accidentally drops & orange from his lunch bag; The orange rolls down the rool, which i> angled at 0 28,58 relative t0 Ihe harizontal as shown the figure below The bottom edge of the roofus meters above Ihe ground. Ihe orarge leaves the right edge ol Ihe rooftop with velocity 0l Ti 4.471,how fal, Arto the right of the roof edge does his 8 meter tall fellow consiruction warker Werdy have sland on the ground 50 that the orange just barely passes over her head? [Figure not diawn t0 scalel Imapa *x4: ALhae
Wendy must stand 1.19m to the left of the edge of the roof so that the orange just barely passes over her head.
Bob's orange will travel down the slanted roof with a velocity of 4.47 m/s, and it will hit the ground 3.0 m below the edge of the roof. The height of the orange above the ground at the edge of the roof is 1.8 m, and the angle of the roof is 28.5° relative to the horizontal.
To calculate the distance Ar that Wendy has to stand from the edge of the roof, we must first calculate the time it takes for the orange to reach the ground. Using the equation for the vertical displacement of an object with an initial velocity, we can solve for the time, t:
d = v*t - (1/2)*g*t^2
0 = 4.47*t - (1/2)*9.8*t^2
t = 0.938s
Next, we must calculate the horizontal displacement of the orange from the time, t. Using the equation for the horizontal displacement of an object with an initial velocity and a constant acceleration we can solve for the displacement:
x = v*t + (1/2)*a*t^2
x = 4.47*0.938 + (1/2)*0*0.938^2
x = 4.19m
To calculate the distance Ar that Wendy must stand from the edge of the roof, we must subtract the horizontal displacement of the orange from the height of the edge of the roof:
Ar = 3.0 - 4.19
Ar = -1.19m
Therefore, Wendy must stand 1.19m to the left of the edge of the roof so that the orange just barely passes over her head.
For more questions like Distance click the link below:
https://brainly.com/question/29175462
#SPJ4
Figure shows three forces applied to a trunk that moves leftward by 3.00 m over a frictionless floor. The force magnitudes are F 1
​
=5.00 N,F 2
​
=9.00 N, and F 3
​
=3.00 N. and the indicated angle is θ=60.0 0
. During the displacement,
(a) what is the net work done on the trunk by the three forces?
(b) does the kinetic energy of the trunk increase or decrease?
The net work done on the trunk by the three forces is 1.50J and the kinetic energy of the trunk will increase
The data given in the question is:
F 1 =5.00N,
F2 =9.00N,
F3 =3.00N,
θ=60°
d=3m
Work done by each force can be found as
We know that, work done by a force is given by:
W =F d cosϕ,
where ϕ is the angle between Force and displacement vectors.
F₁ is in the direction of the displacement.
So,
W₁=F₁dcosϕ
=(5.00N)(3.00m)cos0°
=15.0J.
Force F₂ makes an angle of
ϕ ₂=180°−θ
=180° −60°
=120°
with the displacement i.e. in negative x direction.
So,
W₂=F₂dcosϕ₂
=(9.00N)(3.00m)cos120°
=−13.5J.
Force F₃ is perpendicular to the displacement.
So, W₃=F₃dcosϕ
=(3.00N)(3.00m) cos90°
=0J
Net Work done by three forces is
As work is a scalar quantity, so total work done will be the algebraic sum of all the individual works.
So, W=W₁+W₂+W₃
=15−13.5+0
=+1.50J.
According to Work energy theorem, total work done on a system equal the change in kinetic energy of the system.
Here, a positive work of 1.5 Joules is done on the trunk, so its Kinetic Energy will increase by 1.5 Joules.
Figure was missing it is attached with the answer
To look more about force click here
brainly.com/question/13191643
#SPJ4
spine in this situation. we will model the spine and upper body as a horizontal rigid rod of uniform density with a length of 50.0 cm and a mass of 40.0 kg. assume that the person attempts to lift an object with their arms, which we will model as attached at the far end of the rod. support of the back in this position is provided primarily by the erector spinalis muscle which we will model as being attached at one end to the spine at a point 33.0 cm from the hip at an angle of 10 degrees; the other end of the muscle is attached to the lower body below the hip.
The amount of tension in the back muscle is 3270 N.
Mass of object = 18.2 Kg
Mass of person = 40 Kg
Length = r = 0.5 m
Length at the spine at required position = r' = 0.33 m
Angle = θ = 10 degrees
Tension is defined as the force transmitted through a rope, string or wire when pulled by forces acting from opposite sides. The tension force is directed over the length of the wire and pulls energy equally on the bodies at the ends. Every physical object which is in contact exerts some force on one another.
Torque = Tension = T =
= T = r'sin10 -rmgsin90
= T = (0.5 X 40 X 9.8) / (0.33 X 0.1736)
= T = 3270 N
To know more about Tension:
https://brainly.com/question/17101390
#SPJ4
The complete question:
We will model the spine and upper body as a horizontal rigid rod or uniform density with a length of 50.0 cm and a mass of 40.0 kg. Assume that the person attempts to lift an object with their arms, which we will model as attached at the far end of the rod. Support of the back in this position is provided primarily by the erector spinalis muscle which we will model as being attached at one end to the spine at a point 33.0 cm from the hip at an angle of 10 degrees; the other end of the muscle is attached to the lower body below the hip. The object being lifted has a mass of 18.2 kg. Calculate the tension , in the back muscle for this scenario.
Most of the mass of our Galaxy lies
a) in the bright spiral arms.
b) between Earth and the Galactic center.
c) outside the luminous part of the Milky Way Galaxy.
d) within the bulge.
e) at the galactic center.
c) outside the luminous part of the Milky Way Galaxy.
While much of the mass of our Galaxy lies within the bright spiral arms, the majority of the mass actually lies outside the luminous part of the Milky Way Galaxy.So the correct option is c.
The Milky Way Galaxy is a vast and expansive collection of stars, gas and dust that spans the universe. It is estimated to contain between 200 and 400 billion stars, making it one of the largest galaxies in the universe. The Milky Way is a spiral galaxy, meaning that it is composed of a central bulge surrounded by four main spiral arms. The luminous part of the Milky Way Galaxy, which is visible from Earth, lies within the spiral arms.
However, the majority of the mass of our Galaxy does not lie within the luminous part of the Milky Way Galaxy. Instead, much of the mass of the Milky Way lies outside the visible part of our Galaxy. This mass is found in the form of dark matter, which is an invisible form of matter that does not emit any light. Dark matter makes up around 85 percent of all the matter in the Universe and is believed to be responsible for the structure and evolution of galaxies.
The rest of the mass of our Galaxy is located within the bulge at the center of the Milky Way, as well as between Earth and the Galactic center. This mass is made up of stars, gas, dust and other forms of matter. While much of the mass of our Galaxy is invisible, it is still an important component of the Milky Way. Without this mass, the structure and evolution of the Milky Way would be drastically different.
Learn more about Galaxy at :https://brainly.com/question/24836631
#SPJ4
1. suppose a computer using direct mapped cache has 2^20 bytes of byte-addressable main memory, and a cache of 32 blocks, where each cache block contains 16 bytes.
Solution:
The block size = 16 words
Tag Block Offset
11 bits 5 bits 4 bits
The memory address 0DB63 will map to the 22nd block and 3 bytes of a block.
cache advantage is, when the cache block is made larger or bigger then, there are fewer misses. The disadvantage is that if the data is not used before the cache block is removed from the cache, then it is no longer useful.
After analyzing the question, the solution is:
As given The Cache of 32 blocks and the memory is word addressable:
The main memory size.
The block size.
The total number of blocks = main memory size/ block size:
Says it is 1 M words in size and it requires 20 bits. Now, from which 32 cache block requires 2^20, 20 bits, and block size means offset requires 2^4, 4 bits. Now the sizes of the bag, and, block and word fields are following:
Tag Block Offset
11 bits 5 bits 4 bits
The hexadecimal address value is 0DB63, its binary equivalent is
The tag = ( first 11 bits) = 0000 1101 101
block = ( next 5 bits ) = 10110
offset = ( next 4 bits ) = 0011
Therefore, the memory address 0DB63 will map to the 22nd block and 3 bytes of a block.
The main favored position or circumstance of the cache happens that, when the cache block is created best or considerably therefore, there happen hardly any misses. this takes place when the information in visible form in the block exists secondhand.
One of the loss exists that if the data exist not secondhand before the cache block exist detached from the cache, then it exist not any more valuable. in this place there exist an addition to the best miss punishment.
To know more about cache:
https://brainly.com/question/29432991
#SPJ4
A baseball player friend of yours wants to determine his pitching speed. You have him stand on a ledge and throw the ball horizontally from an elevation above the ground. The ball lands away. What is his pitching speed?
The pitching speed of basketball player is 58 m/s for A baseball player The ball lands away
As the ball thrown in horizontally, the initial vertical velocity of the ball is zero.
(Vy)t = 0
Use the kinematic equation of motion, y = (Vy)t+1/2gt² and find the time of flight of the baseball.
3.0 m = (0)t + 1/2 (9.8 m/s²)t²
3.0 m = (4.9 m/s²)t²
t= √3.0 m /4.9 m/s²
= 0.78 s
The maximum horizontal distance (range) travelled by the ball is.
x = v2t
V2 = x/t
= 30 m/0.78 s
= 38 m/s
Consider the ball is being thrown 5° above the horizontal. The maximum height to which the ball can go above the elevation is,
h= (vsin 5°)² / 2g
= [vsin 5°]² / 2(9.8 m/s²)
= 3.87×10^-4 V²
The time taken for ball to reach the ground from the height 0.559 m above the elevation of height 3.0 m is,
t=√2hmax/g
= √2(3.87x10^-4 v²) / 9.8 m/s²
= 8.88x10^-3 v
The horizontal range of the ball is.
x = v₂t
30 m = (v cos 5°) (8.88x10^-3 v)
V² = 30 m / (8.88×10^-3) cos 5°
v=58 m/s²
Consider the ball is being thrown 5° below the horizontal. The time of flight of the ball is,
t = v cos 5° / 30 m
=3.32×10^-2 v
The time taken for ball to reach the ground can be calculated as follows.
y = (Vy)t1 + 1/2 gt²
3.0 m = (vsin 5°) (3.32 × 10^−2 v) + 1/2 (9.8 m/s²) (3.32×10^-2 v)² =
3.0 m = (0.289×10^-2)v²+5.4×10^-3v²
8.29×10^-3 V^2 = 3.0 m
V = √3.0 m / 8.29 8 10^-3
= 19 m/s
Therefore, the minimum speed of the ball is 19 m/s and maximum speed of the ball is 58 m/s
Learn more about Speed here:
https://brainly.com/question/28224010
#SPJ4
Mary weighs 525 N and she walks down a flight of stairs to a level 6.5 m below her starting point. What is the change in Mary’s potential energy? Answer in units of J.
The change in Mary’s potential energy is 3412.5 Joule.
What is potential energy?
Potential energy is a form of stored energy that is dependent on the relationship between different system components. If a steel ball is raised above the ground as opposed to falling to the ground, it has more potential energy. It is capable of performing more work when raised.
Given that: Mary weighs 525 N and she walks down a flight of stairs to a level 6.5 m below her starting point.
Hence, change in potential energy is = weight × change in height
= 525 N × 6.5 m
= 3412.5 Joule.
Learn more about potential energy here:
https://brainly.com/question/24284560
#SPJ1
A 150-kg electromagnet is at rest and is holding 100 kg of scrap steel when the current is turned off dropping the steel. - 2- Knowing that the cable and the supporting crane have a total stiffness equivalent to a spring of constant k 60 kN/m and a damper c = 300 Ns/m, determine (a) the frequency of oscillation (b) the maximum upward displacement І В
The frequency of the oscillation is determined to be 0.123 Hz.
The number of waves passing through a fixed point in unit time is said to be frequency.
Given that, Mass of the scrap steel = 100 kg
Spring constant k = 60 kN/m
The formula for time period is as follows,
T = 2π √(m/k)
And the relation between time period and frequency is, T = 1/f
f = 1 / [2π √(m/k)] = 1/ [ 2π √(100/60) = 1/ [ 2π * 1.29] = 1/8.105 = 0.123 Hz
Thus, the frequency of oscillation is 0.123 Hz.
To know more about frequency:
https://brainly.com/question/29170537
#SPJ4
use the theory of elasticity and given applied pressure at the end of construction, determine the settlements at 2p and 3p
Elasticity theory is concerned with the relationship between forces applied to an item and the subsequent deformations.
In practice, analyzing a material's elastic behavior is reduced to studying basic deformations and determining the appropriate elastic constants. Our bodily tissues are pliable. This mechanical feature is particularly significant in the lungs, skin, and arteries, because aging produces emphysema, loose skin, and arteriosclerosis. Elastic fibers are extracellular matrix fibers that resemble rubber and are responsible for tissue elasticity. Elasticity refers to an object's or material's capacity to return to its original shape after being stretched or crushed. Because of its elastic nature, a rubber regains its shape after a long stretch.
Learn more about elastic here-
https://brainly.com/question/25945297
#SPJ4
Consider the broadcasting circuit for an AM radio station which broadcasts at a frequency of 1400 kHz. The free electrons in such a circuit are moving back and forth in simple harmonic motion. (a) How long does it take for the free electrons in this circuit to go back and forth once? Give your answer in microseconds. μs (b) Assuming the average speed of the free electrons is 100 μm/s, what is the range of motion of the electrons as they go back and forth in the wires of the circuit. (HINT: As a free electron goes back and forth, it travels its full range every half cycle.) Give your answer in nanometers. nm (c) What is the wavelength of the electromagnetic radio waves emitted by this broadcasting circuit? Give your answer in meters. m
a) Time period is given by 0.751 b) Displacement is 0.0751 nm c) The wavelength of the electromagnetic radio waves emitted is 225.56 m
T = 1/f
T = 1/(1330*10^3 Hz)
T = 751.88 ns
Time period T = 0.751 us
b) displacement is given by:
x = velocity * Time
x = 100*10^-6 m/sec*0.751*10^-6 sec
x = 0.0751 nm
c) lambda = c/f
lambda = 3*10^8/(1330*10^3 Hz)
lambda = 225.56 m
Displacement, commonly known as length or distance and denoted by the letters d or s, is a one-dimensional variable that represents the separation between two defined points. In the International System of Units (SI), the meter is the common unit of displacement (m). Transferring unfavorable emotions from one thing or person to another is referred to as displacement and is a defensive tactic. To "take out" their rage on a family member, for instance, a person can yell at them if they are upset with their job. Replace, supersede, and supplant are some frequent alternatives to the word "displace."
Learn more about displacement here:
https://brainly.com/question/11934397
#SPJ4
which of these variable stars would be classified as a rr lyrae? which of these variable stars would be classified as a rr lyrae? an f giant with a period of 14 hours a pulsar with a period of 0.14 seconds a k giant with a period of 14 days an m giant with a period of 140 days a b supergiant with a period of 0.14 days
An F giant with a period of 14 hours these variable stars would be classified as a RR Lyrae.
All the stars we see in the night sky are in our very own Milky way Galaxy. Our galaxy is referred to as the Milky way because it seems as a milky band of light inside the sky whilst you see it in a certainly darkish place. it's miles very difficult to be counted the range of stars in the Milky way from our position inside the galaxy.
The period of time at some stage in which an activity happens or a circumstance remains. it may be measured both in seconds or in thousands and thousands of years, depending upon the character of the pastime of situation being taken into consideration.
Learn more about stars here :-
brainly.com/question/5716538
#SPJ4
What is the average speed of the dog if it’s goes 40 meter in 8 second
the top of the saturated zone, as marked by the dashed line in the illustration, is called the water .
The dashed line in the figure denotes the water, which is at the top of the saturated zone. The underground region is included in the saturated zone.
The geologic medium's whole network of connecting apertures is fully submerged in water. This zone is frequently divided into the phreatic zone and the capillary fringe by hydrogeologists. The area of ground directly below the water table is known as the zone of saturation. Water has seeped into the pores and cracks of the earth and rocks. Over the water table, the saturated zone is more corrosive than the saturated zone. One extreme of the area's moisture content and the other extreme of the soil's dryness. a saturated area. The unsaturated zone can contain discrete saturated zones.
Learn more about saturated zone here
https://brainly.com/question/18851564
#SPJ4
The complete question is-
The top of the saturated zone, as marked by the dashed line in the illustration, is called ?
what is the period if a runner completes 5 laps around a circular track in 450s
Answer:
90 seconds to complete one lap around the track
Explanation:
To find the period of a runner's laps, we need to first find the length of time it takes for the runner to complete one lap around the track. We can do this by dividing the total time it takes to complete 5 laps by the number of laps:
period = 450 seconds / 5 laps
period = 90 seconds/lap
This means that it takes the runner 90 seconds to complete one lap around the track. This is the period of the runner's laps.