The volume of 15.8 M concentrated nitric acid required to completely react with 1.00 g of copper would be 0.004 L or 4 mL.
Stoichiometric problemConcentrated nitric acid and copper react to produce hydrogen gas, nitrogen dioxide gas, and copper (II) nitrate according to the following equation:
[tex]Cu + 4HNO_3 --- > Cu(NO_3)_2 + 2H_2 +2NO_2[/tex]
The mole ratio of copper the nitric acid is 1:4.
I g of copper is equivalent to:
mole = mass/molar mass
= 1/64
= 0.016 mol
The equivalent mol of the nitric acid would be: 0.016 x 4 = 0.064 mol
Recall that molarity is the ratio of the number of moles of solutes and the volume of the solution in liters.
Thus, volume = mole/molarity.
Volume of 0.064 mol nitric acid = 0.064/15.8
= 0.004 liters
0.004 liters = 4 mL
Thus, the volume of the concentrated nitric acid that will be required to completely react with 1.00 grams of copper would be 0.004 liters or 4 mL.
More on stoichiometric problems can be found here: https://brainly.com/question/14465605
#SPJ1
one antifreeze solution is % alcohol and another is % alcohol. how much of each mixture should be added to make l of a solution that is % alcohol?
One antifreeze solution contains % alcohol, whereas the other does not. The next section explains how much of each combination to use to create one liter of alcohol-containing solution.
There are two requirements that must be met: (a) the combined volume of the two solutions must equal the sum of the volumes of the two solutions; and (b) the combined volume of the two solutions must contain the same quantity of alcohol as the combined volume of the two solutions.
Thus, we have two equations:
(1) V26 + V21 = V24 = 60 L
(2) c26V26 + c21V21 = c24V24
Equation (1) yields
(3) V21=60 L - V26.
Equation 2 yields the following:
(4) 0.26V26+0.21V21=0.24 60 L = 14.4 L
Equation 3 is replaced by 0.26V26+0.21(60 L - V26)=14.4 L in equation 4.
0.21V26=14.4 L, 0.05V26=1.8 L, and 0.26V26+12.6 L
V21=60 L - 36 L = 24 L,
where V26=1.8 L/0.05=36 L.
To get 60 L of 24% alcohol, combine 36 L of 26% alcohol with 24 L of 21% alcohol.
To know more about antifreeze please click on the link brainly.com/question/14753001
#SPJ4
complete question:
One antifreeze solution is 26% alcohol and another is 21% alcohol. How much of each mixture should be added to make 60 L of a solution that is 24% alcohol?
how many moles of sodium chloride will be produced from the neutralization of 2.4 moles of hydrochloric acid?
From the neutralization of 2.4 moles of hydrochloric acid sodium chloride will be produced 2.4 moles.
HCl + NaOH ⇄NaCl + H2O
1 moles of HCl and 1 moles of NaOH needed to produce 1 mole of NaCl .
2.4 moles of HCl and 2.4 moles of NaOH needed to produce 2.4 mole of NaCl .
When determining how much of a substance there is, the concept of a mole is helpful. When dealing with particles at the atomic (or molecular) level, it is well understood that even a single gram of a pure element includes a vast number of atoms. The mole notion is widely utilized in this context. The most common unit of measurement is the "mole," which is a count of many particles. The number 6.02214076*1023, commonly known as the Avogadro constant, is frequently denoted by the letter "NA". Among the elementary entities that can be represented in moles are atoms, molecules, monoatomic and polyatomic ions, as well as other particles (such as electrons)
To know more about moles visit : brainly.com/question/15209553
#SPJ4
C₂H5OH + 202 → 2CO₂ + 3H₂O + 1367 kJ What is the mole ratio between water and carbon dioxide? ? mol H₂O mol CO2 Fill in the green blank.
Answer: There is a 3:2 mole ratio between these two compounds.
Explanation:To determine the mole ratio between water (H2O) and carbon dioxide (CO2) in the given chemical equation, you will need to balance the equation first. The balanced chemical equation is:
C2H5OH + 3O2 → 2CO2 + 3H2O + 1367 kJ
Once the equation is balanced, you can use the coefficients in front of each compound to determine the mole ratio. In this case, the coefficient for H2O is 3, and the coefficient for CO2 is 2, which means that there is a 3:2 mole ratio between these two compounds. This means that for every 2 moles of CO2, there are 3 moles of H2O produced in the reaction.
It is important to note that the mole ratio is only a way to express the relative amounts of reactants and products in a chemical reaction, and does not necessarily reflect the actual amounts of the compounds involved. To determine the actual amounts of each compound, you will need to know the mass or volume of the compounds, as well as their respective densities or molar masses.
which of the following is a strong acid in aqueous solution? a. h3po4 b. hclo c. h3po3 d. hno2 e. hbr
The correct option is Hydrobromic acid (hbr), This is the strong Acid when compared to the other acids
Hydrobromic acid is the term for aqueous HBr.
Hydrogen bromide will be the name if there is no water, or if it is not aqueous, while hydrobromic acid will be the name if it is acidic and aqueous. Because it is acid, the suffix ic is used, and because it is aqueous, the suffix hydro is used.
To learn more about Hydrobromic acid please click on below link
https://brainly.com/question/11003770
#SPJ4
If the reaction (NH4)3CO3 <--> 2NH3 + CO2 + H2O were at equilibrium, what would happen if the volume of the container were increased. Justify your answer
camphor has a lower melting point range than that of borneol. does this make sense in terms of its structure? explain your reasoning.
Compared to borneol, camphor has a narrower melting point range. Does the structure of this make sense? Describe your thinking.
The melting and boiling points of alcohols are usually lower than those of ketones. the intermolecular hydrogen bond's brightness. As a result, the melting point is greater in the boreal. Camphor is a substance that is waxy, flammable, and transparent and has a strong aroma. Its molecular structure contains the terpenoid molecule C10H16O. It grows on the large East Asian evergreen tree known as the camphor laurel (Cinnamomum camphora). Alcohols are substances with the general chemical formula R-OH, where R is an alkyl or a substituted alkyl group. Therefore, alcohols are alkane derivatives that include one or more H.
Learn more about melting point here:
https://brainly.com/question/29578567
#SPJ4
Based on the Lewis/electron dot representation
of the two atoms, predict the ratio of metal
cationic (+) atom to nonmetal anionic (-) atom in
Na
the compound.
•:
A. 2:3
B. 1:3
C. 1:1
D. 1:2
Answer: C
Explanation: One electron of sodium is transferred to iodine.
Answer: C
Explanation:
1) an acid base titration involves a a) composition reation b) neutralization reaction c) single-replacement reaction d) decomposition reaction
An acid-base titration involves a neutralization reaction
An acid-base titration is a laboratory technique that is used to determine the concentration of an acid or a base in a solution. The basic principle behind this technique is the fact that acid-base reactions are reversible, meaning that an acid and a base can react with each other to form a neutral compound.
In an acid-base titration, a known concentration of a base is added to a solution containing an unknown concentration of an acid. The acid and the base react with each other to form a neutral compound, such as water. By carefully measuring the volume of the titrant that is required to neutralize the acid, the concentration of the acid in the solution can be determined. This process is known as a neutralization reaction.
Read more about neutralization reaction on:
https://brainly.com/question/23008798
#SPJ4
calculate the molarity of a sultion prepare by dissolving 78.6 g of kf in enough water to produce 225 ml of solution
Therefore, the solution's needed molarity is:6.01M
Check the table below to understand the computations.
Molarity:
Calculating the concentration of a solute that is present in a certain volume of solution is done using the Molarity (M) or Molar Concentration approach. The unit of measurement for the solute is the mole, whereas the unit of measurement for the solution is the liter. The amount of moles of a solute present in one liter of a solution, or moles per liter of a solution, is consequently defined as molarity, represented by the symbol M.
This is, Molarity=moles/volume
Due to it,
mass KF=78.6 g.
KF moles = mass / molar
=78.6/58.09
=1.353mol
volume = 0.225 L from 225 ml.
Using the aforementioned method, we can now get the necessary molarity as,
Molarity=moles/volume
=1.353/0.225
Molarity=6.01M
To know more about Molarity please click on the link brainly.com/question/8732513
#SPJ4
Look at the image shown.
H-H
What does this image represent?
Linear molecule with one domain
Linear molecule with two domains
Tetrahedral molecule with four domains
O
Trigonal planar molecule with three domains
the star r coronae borealis varies irregularly due to emission of clouds of this element. the atmosphere of cw leonis is dominated by this element. in addition to transition metal oxides and lithium, compounds containing this element are characteristic of spectra of brown dwarfs. the immediate cause of
The star r coronae borealis varies irregularly due to emission of clouds of carbon.
The R Coronae Borealis (RCB) stars are known for their prolific production of dust, which results in their pronounced, recognizable brightness declines. The stars are carbon-rich and hydrogen-deficient. There are significant extended dust shells around several RCB stars, including the star itself, R Coronae Borealis (R CrB).
There are three ways that the shells could develop. There are three possible explanations for these remnants: (1) they are fossil Planetary Nebula (PN) shells, which would be present if RCB stars were created by a final, helium-shell flash; (2) they are material from the white-dwarf (WD) merger that produced the RCB stars; or (3) they are materials that were lost from the star during the RCB phase.
For more information on borealis kindly visit to
https://brainly.com/question/12757223
#SPJ4
4.0 mol Na can form 4.0 mol NaF and 2.5 mol F2 can form 5.0 mol NaF. What mass of NaF forms during the reaction? (NaF; 41.98 g/mol) ? ] g NaF Round your answer to the tens place. g NaF
The mass of NaF forms during the reaction of 4.0 m Na and 2.5 mol [tex]F_2[/tex] to form 4.0 mol NaF would be 167.92 grams.
Stoichiometric problemSodium (Na) and Fluorine molecule ([tex]F_2[/tex]) reacts to form NaF according to the following balanced equation:
[tex]2Na + F_2 --- > 2NaF[/tex]
Now, according to the illustration, 4.0 mol of NaF is formed. Thus half of our problems have already been solved.
Recall that the mass of a substance is the product of the number of moles of the substance and its molar mass. This is mathematically expressed as:
mass = mole x molar mass
We already know that 4.0 mol of NaF was formed and the molar mass of NaF was given as 41.98 g/mol. Thus:
Mass of 4.0 mol of NaF = 4.0 x 41.98
= 167.92 grams
In other words, the mass of NaF that would be formed during the reaction will be 167.92 grams.
More on stoichiometric problem can be found here: https://brainly.com/question/29856106
#SPJ1
Which option describes something that causes ionic bonds to form?(1 point)
A.large electronegativity differences
B.small electronegativity differences
C.combustion reactions
D.replacement reactions
define diffusion
pls answer ASAP
Answer:
Diffusion is the movement of particles from an area of high concentration to an area of low concentration.
Explanation:
how/why is the 1-child family one potential solution to the increasing problem of global warming due to co2 emissions?
It would be the most high-impact action towards emissions savings.
What is global warming?
As a result of rising levels of greenhouse gases, a phenomena known as global warming occurs when the planet's average temperature rises. As the sun's radiation enters the atmosphere, greenhouse gases like carbon dioxide, methane, and ozone trap it.
What is emissions?
As atoms return to their lower energy states, they emit a variety of coloured photons. When heated or stimulated at high energies, atoms produce light.
why is the 1-child family one potential solution to the increasing problem of global warming due to co2 emissions, because it would be the most high-impact action towards emissions savings.
Therefore, it would be the most high-impact action towards emissions savings.
Learn more about global warming from the given link.
https://brainly.com/question/3553382
#SPJ4
The volume of a sample of water is found to be 86.3 cubic centimeters (cm3). What is the volume of the sample in mm3?
answer; 8.017*10^3
Explanation: because cube means it is multiplication of three times so we multiply 86.3 three times and again we multiply it with 100 because we need to convert it in mm and at last we put the answer in cube root ..
The air in your classroom contains a mixture of gases, including oxygen and nitrogen.
Which term best describes the solubility of the gases?
Answer:
The solubility of gases in a liquid or another gas is a measure of the extent to which the gas can dissolve in the liquid or gas. It is usually expressed as the amount of gas that can dissolve in a given volume of liquid or gas at a specific temperature and pressure. The solubility of gases in a mixture, such as the air in your classroom, can vary depending on the specific gases present and their relative proportions.
pls award brainliest!
Explanation:
how much energy is required to ionize hygrogen in each of the following states? (a) ground state
The energy needed is the energy that changes. The electron in a hydrogen atom is initially assumed to be in the ground state with n=1. The energy of the electron in its ground state is therefore 13.6 eV.
As a result, 12.75eV of the energy is needed to transfer electrons from the ground state to the third excited state. The 4th and 5th ionisation the energies differ significantly from one another. The fourth electron is attracted to the nucleus atom considerably less strongly than the fifth electron because it is in an inner main shell that is closer to the nucleus.
To learn more about electron, click here.
https://brainly.com/question/1255220
#SPJ4
how many molecules of water are produced by the electron-transfer chain during the complete aerobic oxidation of one molecule of pyruvate?
The water molecule produced by the electron transfer chain of one pyruvate molecule is 5H2O.
Aerobic respiration is the process of breaking down glucose compounds with the help of oxygen. Oxygen will gain electrons and then react with hydrogen ions to produce water or H2O.
Aerobic respiration consists of four stages, the first stage is glycolysis, where glucose is converted into two pyruvic acids, 2 NADH, and 2 ATP. Then 2 pyruvic acids are converted into 2 acetyl co-A and 2 NADH in the process of oxidative decarboxylation. 2 acetyl co-A is converted to 4 CO2, 6 NADH, 2FADH2, and 2 ATP in the kreb cycle. In the final stage of electron transport 10 NADH and 2 FADH2 are converted to 34 ATP and 10H2O. So in 1 pyruvic acid 5 H2O molecules are produced during the electron transport process.
Learn more about electron transport at:
https://brainly.com/question/13975046
#SPJ4
z, Kelly
7
In double replacement reactions, why will two metals not combine with each other when products are
formed?
A metals form negative ions and like charges attract
B metals form positive ions and like charges do not attract
Cmetals form negative ions and like charges do not attract
D metals form positive ions and like charges attract
<6
Save
8>
Dec's
When pieces of two ionic compounds swap places to create two new compounds, the reaction is known as a double replacement (also known as a double displacement, exchange, or metathesis reaction).
What is Double Displacement Reaction?When one reactant is partially replaced by another, the reaction is referred to as a twofold displacement reaction.
The list of double displacement reactions is as follows:
CB + CD + AB = AD
A twofold replacement process replaces the ions in two reactant ionic compounds with the same ions in two new product compounds.
When two reactants transfer cations or anions to create two new products, the reaction is called a double replacement.
Metathesis reactions and double displacement reactions are two other names for double replacement processes.
Examples of double replacement reactions include precipitation, gas production, and neutralization.
To learn more about double replacement refer to :
https://brainly.com/question/23918356
#SPJ1
Given that S is the central atom, write a Lewis structure of OSF4 in which the formal charges of all atoms are zero.
There is no official fee. Since all 6 valency electrons were coupled onto six electronegativity from the gas and fluor atoms, there are no lone pair protons on the sulfur atom.
An atom is what?A anion is defined solely by its electrons, which are tiny pieces of substance. An atom is made up of a core nucleus and one or perhaps more negative charged electrons that orbit it. The positively charged, comparatively hefty the protons and neutrons that make up the nucleus may be present.
What element has atoms in it?A component of an element is an atom. The certain component only has one kind of atom per atom. Protons, neutrons, plus electrons, which are particles, make up the remainder of an atom.
To know more about Atom visit:
https://brainly.com/question/1566330
#SPJ4
a solution is prepared by dissolving 42.23 g of nh 4 cl into enough water to make 500.0 ml of solution. calculate its molarity.
The solution's molarity will be 0.7893 mol in accordance with the question that has been provided.
Describe molarity using an example.the amount of solute in moles per solution liter. Table salt is the molecule and moisture is the liquid when it is dissolved in salt. Sodium chloride weights 58.44 grams per mole. If you dilute 58.44 grams of sodium chloride (1M) in a liter of water.
What is a 5% solution's molarity?5 grams of sucrose in 100 mL and 50 grams in 1l is referred to as a 5% solution of glucose. 180 grams od glucose will be present in 1L of a 1 molar liquid of glucose. As a result, the solution containing 5% glucose will possess a number of moles of 0.27 about 270 mili molar.
Briefing:
molar mass: 53.50 g/mol
mass: 42.23 g NH4Cl
volume: 0.500 L
mass x molar mass = 0.7893 mol
To know more about molarity visit:
https://brainly.com/question/8732513
#SPJ4
atoms with a strong attraction for electrons they share with another atom exhibit¬__
Atoms with a strong attraction for electrons they share with another atom exhibit high electronegativity.
What is electronegativity?
The tendency of an atom of a certain chemical element to attract shared electrons (or electron density) when forming a chemical bond is known as electronegativity. The atomic number of an atom and the distance of its valence electrons from the charged nucleus both have an effect on how electronegative that atom is.
An atom or substituent group will attract electrons more when the corresponding electronegativity is stronger. In order to define a bond along the continuous scale from covalent to ionic bonding, electronegativity provides a simple method for quantitatively measuring the bond energy as well as the orientation and strength of a bond's chemical polarity.
To learn more about Electronegativity refer here:
https://brainly.com/question/17762711#
#SPJ4
[Urgent!] - Equilibrium Problem
The equilibrium constant, K, for the following reaction
N₂(g) + O₂(g) ↔ 2NO(g)
is 4.00 x 10⁻² at a very high temperature. The reaction is at equilibrium at this temperature with [N2] = [O2] = 0.100 M and [NO] = 0.0200 M in a 2.00 liter flask. If 0.120 mol of NO is suddenly added to the reaction mixture what will be the concentrations of all species when equilibrium is re-established?
Answer:
√K = [.08-2x]/[.1+x]
Explanation:
As instructed by the question asker, I am putting this answer down. Hopefully it is correct (fingers crossed).
Please help the question is on the photo attached
Answer:
296,875,000 mol
Explanation:
1mol of SO2 is 64g
1.9×10⁷ kg ----> 1.9×10¹⁰g
1mol ----> 64g
x -----> 1.9×10¹⁰g
x= 1.9×10¹⁰/64 mols
= 296,875,000 mol
What are the potential benefits from storing cord blood? What are the risks or costs?
Answer:
Cord blood contains cells called hematopoietic stem cells. These cells can turn into any kind of blood cell and can be used for transplants that can cure diseases such as blood disorders, immune deficiencies, metabolic diseases, and some kinds of cancers.
Explanation:
WILL GIVE BRAINLIEST
5. If water is added to magnesium nitride, ammonia gas is produced when
the mixture is heated. Mg3N2 (s) + H2O -> NH3 (g) + MgO (s). When excess water is added to 10.3 g of magnesium nitride, what volume of
ammonia will be collected at 24 deg C and 753 mm Hg?
Answer:
0.112L, good luck reading the whole thing
Explanation:
To find the volume of ammonia that will be produced when water is added to magnesium nitride, we need to first determine the number of moles of magnesium nitride that are present in 10.3 g of the compound. To do this, we can use the formula for the molar mass of a compound, which is given by:
molar mass = mass / moles
where mass is the mass of the compound and moles is the number of moles of the compound. Since the mass of magnesium nitride is given as 10.3 g, we can rearrange the formula to solve for the number of moles of the compound:
moles = mass / molar mass
The molar mass of magnesium nitride is given by the formula Mg3N2, which has a molar mass of 148 g/mol. Substituting this value into the formula for the number of moles of the compound and substituting the mass of magnesium nitride, we get:
moles = 10.3 g / 148 g/mol
= 0.069 mol
Since the balanced chemical equation for the reaction of magnesium nitride with water is given by:
Mg3N2 (s) + H2O -> NH3 (g) + MgO (s)
we can use the mole ratio between the reactants and products to determine the number of moles of ammonia that will be produced when 0.069 mol of magnesium nitride reacts with water. Since the equation is balanced, the mole ratio between the reactants and products is 1:1, meaning that for every 1 mole of magnesium nitride that reacts with water, 1 mole of ammonia will be produced. Therefore, the number of moles of ammonia that will be produced when 0.069 mol of magnesium nitride reacts with water is 0.069 mol.
To find the volume of ammonia that will be produced at 24 deg C and 753 mm Hg, we can use the ideal gas law, which is given by:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature. Since the pressure and temperature of the reaction are given as 753 mm Hg and 24 deg C, respectively, we can rearrange the ideal gas law to solve for the volume of ammonia that will be produced:
V = nRT / P
Substituting the values for the number of moles of ammonia, the ideal gas constant, and the pressure and temperature of the reaction into the formula, we get:
V = (0.069 mol) * (0.08206 L * atm / mol * K) * (297 K) / (753 mm Hg)
= 0.112 L
Therefore, the volume of ammonia that will be produced when 10.3 g of magnesium nitride is reacted with water at 24 deg C and 753 mm Hg is 0.112 L.
While attempting to determine the structure of a compound using elemental analysis and functional group tests, you are generally able to recover your original sample.
While attempting to determine the structure of a compound using elemental analysis and functional group tests, you are generally able to recover your original sample.
True
False
True, You can typically get your original sample back when utilizing functional group tests and elemental analysis to try to figure out a compound's structure.
Which test is applied to a compound's elemental analysis?
In an elemental analysis, the sodium test, also known as Lassaigne's test, is used to determine whether certain foreign elements, such as halogens, nitrogen, sulfur, and phosphorus, are present in an organic compound.
What analytical techniques can be used to ascertain a compound's structure?
The four primary methods are mass spectrometry, nuclear magnetic resonance (NMR) spectroscopy, infrared (IR), and ultraviolet and visible spectroscopy. A minimal amount of sample is required for spectroscopy, and after an IR, NMR, or UV spectrum has been generated, the sample can be reused.
Learn more about Functional Group from given link
brainly.com/question/28496504
#SPJ1
How is Bernoullis principle related to flight
When an aircraft is in flight, the shape of the wings is such that the air travels faster over the top of the wing than it does under the wing. According to Bernoulli's principle, the faster-moving air has a lower pressure than the slower-moving air. This difference in pressure creates an upward force on the wing, known as lift, which counteracts the force of gravity and allows the aircraft to ascend.
In addition to lift, Bernoulli's principle also plays a role in the generation of thrust in aircraft. The movement of air over the blades of a jet engine's fan creates a difference in pressure, with the air having a higher pressure in front of the blades and a lower pressure behind them. This difference in pressure results in a forward force on the blades, which contributes to the overall thrust of the engine.
FILL IN THE BLANK. A factor (x − a)k, k > 1, yields a ________ ________ x = a of ________ k.
A factor (x - a) raised to k, k > 1, yields a repeated zero x = a of multiplicity k.
In mathematics, a polynomial is an expression consisting of uncertainties and coefficients that involve only addition, subtraction, multiplication, and positive integer powers of variables.
A polynomial is defined as an expression consisting of variables, constants, and exponents combined by operations such as addition, subtraction, multiplication, and division (without dividing by a variable). In mathematics and computer algebra, the polynomial multiplier or polynomial multiplier represents a polynomial or integer with coefficients in a particular domain as the product of irreducible factors with coefficients in the same domain. a domain. For example, the factorisation of x2 + 2x is x(x + 2), where x and x+2 are the factors that can be multiplied together to get the original polynomial.
To learn more about polynomial factorization, here
https://brainly.com/question/26354419
#SPJ4