How many Br atoms are in 2.50 g of Br?A) 1.88x1022 Br atoms D) 6.02 x 1023 Br atomsB) 1.51 x 1024 Br atoms E) 9.42 x 1021 Br atomsC) 7.54 x 1021 Br atoms

The pH of the C₆H₅COONa solution at 0.200 M is roughly 2.89, which is the same as response choice (d).

In water, C₆H₅COONa dissociates to form C₆H₅COO⁻ and Na⁺ ions,

C₆H₅COONa ⇌ C₆H₅COO⁻ + Na⁺

The C₆H₅COO⁻ ion can act as a weak base by accepting a proton from water. The Ka of benzoic acid, C₆H₅COOH, is 6.4 × 10⁻⁵. To calculate the pH of a 0.200 M solution of C₆H₅COONa, we need to consider the dissociation of C₆H₅COO⁻ in water. We can assume that the dissociation of water is negligible compared to the dissociation of C₆H₅COO⁻, so we can use the following equation to calculate the concentration of OH⁻ ions,

Kb = Kw/Ka = [OH⁻][C₆H₅COOH]/[C₆H₅COO⁻]

Since Kb × Ka = Kw, we can use the Kb value to calculate the OH⁻ concentration and then use the expression for Kw to calculate the H⁺ concentration and pH,

Kb = [OH⁻][C₆H₅COOH]/[C₆H₅COO⁻]

[OH⁻] = Kb[C₆H₅COO⁻]/[C₆H₅COOH]

= (1.0 × 10⁻¹⁴)/(6.4 × 10⁻⁵ × 0.200)

= 7.81 × 10⁻¹² M

Kw = [H⁺][OH⁻]

= 1.0 × 10⁻¹⁴

[H⁺] = Kw/[OH⁻]

= 1.28 × 10⁻³ M

pH = -log[H⁺]

pH = 2.89

Therefore, the pH of the 0.200 M solution of C₆H₅COONa is approximately 2.89, which corresponds to answer choice (d),

To know more about pH value, visit,

https://brainly.com/question/172153

#SPJ4

The result is approximately 2, we'll multiply the empirical formula by this factor to obtain the molecular formula: C4H10O × 2 = C8H20O2, So, the molecular formula of the compound is C8H20O2.

To find the molecular formula of the compound, we need to determine the ratio of the molar mass to the empirical formula mass.

The empirical formula mass of C4H10O is:

4(12.01) + 10(1.01) + 1(16.00) = 74.12 g/mol

The ratio of the molar mass to the empirical formula mass is:

148 g/mol ÷ 74.12 g/mol = 1.998

This ratio is very close to 2, which means that the molecular formula must be twice the empirical formula.

Therefore, the molecular formula of the compound is: C8H20O2

Hi! To find the molecular formula of the compound, we'll first calculate the molar mass of the empirical formula C4H10O.

C4: 4 × 12.01 g/mol = 48.04 g/mol
H10: 10 × 1.01 g/mol = 10.1 g/mol
O: 16.00 g/mol

The total molar mass of the empirical formula is 48.04 + 10.1 + 16.00 = 74.14 g/mol.

Now, we'll divide the molar mass of the compound by the molar mass of the empirical formula:

148 g/mol ÷ 74.14 g/mol = 1.997 ≈ 2

Since the result is approximately 2, we'll multiply the empirical formula by this factor to obtain the molecular formula:

C4H10O × 2 = C8H20O2

So, the molecular formula of the compound is C8H20O2.

Visit here to learn more about  empirical formula : https://brainly.com/question/14044066
#SPJ11

To find the molecular formula of the compound, we need to know the molecular mass of the compound. We can calculate the molecular mass by using the molar mass and the empirical formula.  the molecular formula of the compound is [tex]C_{8} H_{20} O[/tex].

The empirical formula tells us the simplest whole number ratio of atoms in the compound, but it does not give us the actual number of atoms in the molecule. To determine the actual number of atoms, we need to calculate the ratio between the molar mass and the empirical formula mass.

The empirical formula mass of [tex]C_{4} H_{10} O[/tex] is:

4(12.01 g/mol for carbon) + 10(1.01 g/mol for hydrogen) + 1(16.00 g/mol for oxygen) = 74.12 g/mol

The ratio of the molar mass to the empirical formula mass is:

148 g/mol ÷ 74.12 g/mol = 1.997

This value is close to 2, so we can multiply the empirical formula by 2 to get the molecular formula:

[tex]C_{4} H_{10} O[/tex] x 2 = [tex]C_{8} H_{20} O[/tex]

Therefore, the molecular formula of the compound is [tex]C_{8} H_{20} O[/tex].

Learn more about molar mass

https://brainly.com/question/22997914

#SPJ4

A and B are both correct statements about the role of valence electrons in chemical reactivity. C is not correct - while filled valence sublevels do provide some stability, they do not necessarily give "exceptional stability" and are not always required for an atom or ion to be stable.

the role of valence electrons in chemical reactivity using the terms you've provided:

A. Valence electrons are indeed the electrons that participate in chemical reactions, as they are the farthest from the nucleus and thus more easily involved in bonding.

B. The number of valence electrons lost or gained to achieve a noble gas configuration determines the ions formed by main-group elements, which typically strive for stability.

C. Filled valence s and p sublevels do provide exceptional stability to atoms or ions, as they achieve a stable electron configuration similar to noble gases.

Find out more about valence electrons

brainly.com/question/30799882

#SPJ11

The growth of algae won't cause the pH to fall quickly. As a result, choice C is the right response.

Water bodies that have algae growth may have less clear water, utilize more chlorine, and produce slimy growth on surfaces. Algae use elements like phosphorus and nitrogen, which can upset the water's equilibrium and encourage the growth of hazardous bacteria and other creatures.

Algal decay and death can also lower the oxygen content of the water, which can cause fish deaths and other ecological issues. However, the growth of algae usually does not result in an abrupt pH drop. Acid rain, dissolved minerals and gases, organic matter, and other variables can all reduce pH, however algae growth is not a substantial contributor to pH variations.

To know more about Algae development, visit,

https://brainly.com/question/13485005

#SPJ4

Blue-green algae, although they are actually cyanobacteria.

A class of photosynthetic microorganisms known as cyanobacteria were crucial in forming the Earth's atmosphere and environment. Around 2.7 billion years ago, when most life forms were toxic to methane, carbon dioxide, and other atmospheric gases, they began to evolve. Cyanobacteria produced oxygen as a byproduct of converting carbon dioxide and water into organic matter using light energy, which resulted in the buildup of oxygen in the atmosphere. The atmosphere of the Earth underwent a transformation known as the Great Oxygenation Event that made it possible for complex living forms to evolve. Because they were probably the parents of the chloroplasts found in modern plant cells, cyanobacteria also contributed to the development of eukaryotic cells.

learn more about cyanobacteria here:

https://brainly.com/question/2516577

#SPJ11

As you move down the group from lithium to potassium, the rate of the reaction between sodium and potassium with water increases. This suggests that the rate laws for these reactions change as you move down the group. Specifically, the rate of reaction is likely to be dependent on the concentration of the alkali metal and the concentration of water.

The more reactive metals such as sodium and potassium have a greater affinity for water, leading to a more explosive reaction. Therefore, the rate of reaction is likely to increase as you move down the group due to the increased reactivity of the metals. as you move down the group from lithium to potassium, the reaction with water becomes more explosive. This implies that the rate of reaction increases. The rate laws for these reactions can be concluded as follows:
1. The rate of reaction is directly proportional to the concentration of alkali metals (sodium and potassium in this case) and water.
2. As you move down the group from lithium to potassium, the reactivity of alkali metals increases. This is due to the increase in the size of the atom and the decrease in ionization energy, which makes it easier for the outermost electron to be lost.
3. Therefore, the rate constant (k) in the rate laws for these reactions increases as you move down the group.
In summary, the rate laws for the reactions of sodium and potassium with water indicate that the rate of reaction increases as you move down the group from lithium to potassium, due to an increase in reactivity resulting from atomic size and ionization energy factors.

Learn more about potassium here

https://brainly.com/question/13321031

#SPJ11

As you move down the group from lithium to potassium, the rate of reaction between sodium and potassium with water increases, resulting in a more explosive reaction.

This can be concluded from the fact that the rate laws for these reactions become more favorable as you move down the group. The increased reactivity can be attributed to the lower ionization energies and larger atomic radii of the alkali metals, making it easier for them to lose electrons and react with water.This suggests that the rate laws for these reactions change as you move down the group, with the rate increasing significantly. Additionally, it is important to note that the increase in rate is likely due to an increase in the reactivity of these alkali metals with water, as well as an increase in the size and mass of the atoms themselves.

Learn more about reactivity  here: https://brainly.com/question/30843855

#SPJ11

Answer:

To solve this problem, we can use the ideal gas law, which relates the pressure, volume, number of moles, and temperature of a gas:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.

We are given:

P1 = 1.88 atm

T1 = 25.0°C = 298.15 K

We need to find P2, given:

T2 = 37.0°C = 310.15 K

We can assume that the volume and number of moles of gas remain constant.

Substituting these values into the ideal gas law equation, we get:

P1V = nRT1

P2V = nRT2

Dividing the second equation by the first equation, we get:

P2/P1 = T2/T1

Substituting the values we have, we get:

P2/1.88 atm = 310.15 K/298.15 K

Solving for P2, we get:

P2 = (1.88 atm) x (310.15 K)/(298.15 K) = 1.96 atm

Therefore, the pressure in the tire will be 1.96 atm if the temperature warms up to 37.0°C.

In the esterification experiment, the apparatus was set up at an angle to ensure proper mixing and efficient heat distribution. This angled setup promotes contact between the reactants and allows the esterification process to occur effectively, leading to the formation of the desired ester product.

In the esterification experiment, the apparatus was set up on an angle to ensure that the reaction mixture could be stirred efficiently. Esterification is a slow reaction, and it requires constant stirring to improve the contact between the reactants and to prevent the formation of a boundary layer around the reaction flask. Setting up the apparatus on an angle allows the reactants to move freely and come into contact with each other more effectively, thus improving the rate of the reaction. Additionally, the angle also helps to prevent any potential backflow of the reaction mixture into the condenser, which could cause contamination or damage to the apparatus.

To know more about esterification click here:

https://brainly.com/question/16010744

#SPJ11

The products formed in the acid-base reaction between KOH (potassium hydroxide) and HBr (hydrogen bromide) are potassium bromide (KBr) and water (H2O).

What is Conjugate Base?

A conjugate base is the species that remains after an acid has donated or lost a proton (H+) during a chemical reaction. In other words, it is the species that is formed when an acid loses a hydrogen ion (H+) from its chemical formula.

The products of this reaction, KBr and H2O, are examples of a salt and a neutral compound, respectively. KBr is the conjugate base of the strong acid HBr, and H2O is the conjugate acid of the strong base KOH. The reaction between KOH and HBr results in the formation of a salt, KBr, and water (H2O), through a neutralization reaction.

Learn more about Conjugate Base from the given ink

https://brainly.com/question/28979448

#SPJ1

Collisions among gas molecules or impacts with the container's walls are completely elastic. If a gas molecule collides against something else or the container's walls, none of its energy is wasted.

Gases is made up of particles (the molecules or atom) that are constantly moving at random. Gas particles are continually clashing with one another and with the container's walls. These collisions are elastic, which means that there is no net loss in energy as a result of the impacts.

Gas particles move quickly in all directions, regularly hitting with one other and the container's side. The particles gather momentum and accelerate rapidly as temperature raises.

To know more about energy visit:

https://brainly.com/question/8630757

#SPJ1

The specific humidity of the air is 0.0085 kg H2O/kg dry air, the relative humidity is 34%, and the enthalpy of the air is 80 kJ/kg dry air. respectively.

To determine the specific humidity, relative humidity, and enthalpy of the air, we need to use the psychrometric chart. The psychrometric chart is a graphical representation of the thermodynamic properties of moist air and is used to determine various properties of moist air.

To determine the specific humidity of the air, we need to find the point on the psychrometric chart corresponding to the dry bulb temperature of 28°C and the wet bulb temperature of 15°C. From the chart, we find that the specific humidity of the air is approximately 0.0085 kg H2O/kg dry air.

To determine the relative humidity of the air, we need to find the ratio of the actual vapor pressure to the saturation vapor pressure at the dry bulb temperature of 28°C. From the psychrometric chart, we find that the saturation vapor pressure at 28°C is approximately 3.5 kPa, and the actual vapor pressure is approximately 1.2 kPa. Therefore, the relative humidity of the air is approximately 34%.

To determine the enthalpy of the air, we need to find the point on the psychrometric chart corresponding to the dry bulb temperature of 28°C and the specific humidity of 0.0085 kg H2O/kg dry air. From the chart, we find that the enthalpy of the air is approximately 80 kJ/kg dry air.

For more such questions on enthalpy

https://brainly.com/question/14047927

#SPJ11

The two features of the azeotrope of water, 1-butanol and butyl acetate that allow for the esterification reaction to be carried out are the fact that the azeotrope has a boiling point lower than the boiling points of the individual components, and that it is azeotropic, meaning that the ratio of the three components remains constant during distillation.

This allows for the water to be continuously removed as it forms during the reaction, driving the reaction towards completion, while maintaining the desired concentration of the reactants. Additionally, the azeotropic nature of the mixture ensures that the ratio of the three components remains constant, which is crucial for obtaining consistent and predictable results in the reaction.

The two features of the azeotrope of water, 1-butanol, and butyl acetate that allow for the esterification reaction to be carried out effectively are:

1. Low water content: The azeotrope has a reduced water content, which favors the esterification reaction. This is because esterification is an equilibrium process, and minimizing the water content shifts the equilibrium towards the formation of the ester, in this case, butyl acetate.

2. Boiling point: The azeotrope has a unique boiling point that is different from the individual components. This property allows for easy separation and purification of the product through distillation. As the azeotrope boils at a specific temperature, it can be separated from the reaction mixture, leaving behind the desired ester product.

To know more about esterification reaction click here:

https://brainly.com/question/27830811

#SPJ11

When a carboxylic acid is dissolved in a dilute solution of sodium hydroxide, a salt is formed.

Specifically, the carboxylic acid reacts with the sodium hydroxide to form a carboxylate salt and water. This is known as neutralization, where the acidic hydrogen ion [tex]H^{+}[/tex]from the carboxylic acid reacts with the hydroxide ion [tex]OH^{-}[/tex]from the sodium hydroxide to form water, and the remaining carboxylate ion forms a salt with the sodium ion from the sodium hydroxide. A neutralization reaction can be defined as a chemical reaction in which an acid and base quantitatively react together to form a salt and water as products.

Learn more about neutralization here: https://brainly.com/question/15347368

#SPJ11

The Kelvin temperature required for 0.0470 mol of gas to fill a balloon to 1.20 L under 0.988 atm pressure is approximately 25.2 K.

What is Temperature?

Temperature is a measure of the average kinetic energy of the particles in a substance, such as a gas, liquid, or solid. It determines the direction of heat transfer, which is the flow of thermal energy between objects or systems due to a temperature difference.

To determine the Kelvin temperature required for 0.0470 mol of gas to fill a balloon to 1.20 L under 0.988 atm pressure, we can use the ideal gas law equation:

PV = nRT

where:

P = pressure of the gas (in atm)

V = volume of the gas (in liters)

n = amount of gas (in moles)

R = ideal gas constant (0.0821 L atm / (mol K))

T = temperature of the gas (in Kelvin)

Rearranging the equation to solve for temperature (T), we get:

T = PV / (nR)

Now we can plug in the given values:

P = 0.988 atm

V = 1.20 L

n = 0.0470 mol

R = 0.0821 L atm / (mol K)

Substituting these values into the equation, we get:

T = (0.988 atm) * (1.20 L) / (0.0470 mol * 0.0821 L atm / (mol K))

T = 25.2 K

Learn more about Temperature from the given link

https://brainly.com/question/26866637

#SPJ1

The purpose of the sanitary seal is to prevent the entry of surface contamination into a well. Option d is correct.

The sanitary seal is a component of the wellhead assembly that is located between the well casing and the well cap. It is designed to prevent the entry of surface water, debris, and contaminants into the well.

The sanitary seal typically consists of a rubber gasket or seal that is compressed between the well casing and the well cap. This creates a watertight seal that prevents any surface contamination from entering the well.

The well casing, louvers or slots, and well development are all important components of a well, but they do not specifically serve the purpose of preventing the entry of surface contamination into a well. T

he well casing provides structural support and helps prevent the collapse of the well bore. The louvers or slots allow water to enter the well from the surrounding aquifer. Well development is the process of removing any obstructions and improving the flow of water into the well.

For more question on sanitary seal click on

https://brainly.com/question/28384067

#SPJ11

Muriatic acid is a weak solution or a strong acid in an aqueous solution of hydrochloric acid. Accordingly, the correct option for the answer is option (d).

Acids are found in many natural sources. Vinegar contains acids such as acetic acid, and many fruits contain citric acid. These compounds can be defined in many ways based on their various properties. One explanation is that these are compounds that can dissociate in solution and form acid-forming hydronium ions.

Hydrochloric acid, also known as Muriatic acid, is an aqueous solution of hydrogen chloride. It is colorless. Hydrochloric acid is classified as a strong acid. In 6 M hydrochloric acid solution, 99.996% of HCl molecules react with water to form H₃O⁺ and Cl⁻ ions.

For more information about acid, visit :

https://brainly.com/question/24586675

#SPJ4

Sodium hydroxide plays two key roles in the synthesis of dibenzalacetone: 1. Base catalyst: Sodium hydroxide (NaOH) acts as a strong base catalyst, facilitating the aldol condensation reaction between benzaldehyde and acetone, which ultimately leads to the formation of dibenzalacetone. 2. Dehydration agent: NaOH also serves as a dehydration agent, promoting the elimination of a water molecule during the reaction, which helps drive the reaction towards the formation of the final product, dibenzalacetone.

The two roles that sodium hydroxide plays in the synthesis of dibenzalacetone are:

1. Catalyst - Sodium hydroxide acts as a base catalyst by facilitating the reaction between benzaldehyde and acetone to form dibenzalacetone. It increases the rate of the reaction by providing a suitable environment for the reactants to come together and form the product.

2. Deprotonating agent - Sodium hydroxide also acts as a deprotonating agent by removing the acidic hydrogen atom from benzaldehyde, which makes it more reactive towards acetone. This deprotonation step is necessary for the reaction to occur as benzaldehyde alone is not reactive enough to react with acetone.

To know more about Sodium hydroxide click here:

https://brainly.com/question/24010534

#SPJ11

we need to use the concept of stoichiometry.Therefore, we can conclude that 1 mole of Cl2 gas would be produced under standard conditions if 3,000 F are applied to the Downs cell.

The balanced chemical equation shows that 1 mole of Cl- reacts to produce 1/2 mole of Cl2 gas. This means that if we have 2 moles of Cl-, we can produce 1 mole of Cl2 gas.
We are given that 3,000 F is applied to the Downs cell, which is considered standard conditions. At standard conditions, 1 mole of any gas occupies a volume of 22.4 L. Therefore, we can calculate the number of moles of Cl2 gas produced using the ideal gas law:
PV = nR
where P is the pressure (1 atm at standard conditions), V is the volume (22.4 L per mole of gas), n is the number of moles, R is the gas constant (0.0821 L*atm/mol*K), and T is the temperature (in Kelvin, which is (273 + 1500) = 1773 K for 3,000 F).
Rearranging the equation to solve for n, we get:
n = PV/RT = (1 atm)(22.4 L)/(0.0821 L*atm/mol*K)(1773 K) = 1.00 moles of gas
we need to use the concept of stoichiometry.Therefore, we can conclude that 1 mole of Cl2 gas would be produced under standard conditions if 3,000 F are applied to the Downs cell.

learn more about stoichiometry here

https://brainly.com/question/30215297

#SPJ11

Answer:

Melting

Explanation:

The phase change from a solid to a liquid is called melting, also known as fusion. During this phase change, the substance absorbs heat energy, which causes the particles in the solid to vibrate more and overcome the attractive forces holding them in a fixed position. As a result, the particles gain enough energy to break their bonds and move freely, causing the solid to become a liquid. The temperature at which this phase change occurs is known as the melting point, and it varies depending on the substance.

The pH that could cause the least eye irritation among the given options is b. 7.6.

The human eye has a tear film that is slightly alkaline, with a typical pH range of 7.3 to 7.6. A pH level of 7 is considered neutral, while a pH below 7 is acidic and above 7 is alkaline. In the context of eye irritation, a pH closer to the natural pH of the tear film is likely to cause less discomfort and irritation.

Option a (pH 7) is neutral and not far from the optimal pH, but still more acidic than the natural tear film. Option c (pH 8.2) is more alkaline than the tear film and could cause irritation. Option d (pH 6.8) is slightly acidic and could also lead to irritation. Therefore, option b (pH 7.6) is the closest to the natural pH of the eye and is the most likely to cause the least eye irritation among the provided choices.

learn more about slightly alkaline here:

https://brainly.com/question/13777723

#SPJ11

Answer:

2. 2.74876 + 13.37 +  3. 48640.1

Explanation:

The electrode potential for the oxidation half cell is known as the oxidation potential. As a result, the right answer is A.

The oxidation potential of a substance is described as its tendency to lose electrons, which corresponds to the electrode potential of the oxidation half-cell.

In other words, the potential difference between the electrodes of an oxidation half-cell and the reference electrode measures a substance's proclivity to oxidize. The oxidation potential of an oxidizing substance is related to the standard reduction potential by the equation: E° (reduction) = - E° (oxidation). As a result, option A is right.

Option B and C are erroneous because reduction potential refers to the electrode potential for the reduction half-cell.

To know more about oxidation potential, visit,

https://brainly.com/question/1313684

#SPJ4

There are 0.160 moles of Sodium chloride in 0.300 L of the stock solution. There are still 0.160 moles of Sodium chloride in the final solution. The molar concentration of the final 2.100-L solution is 0.076 M.

Molarity (M), which is determined by dividing the solute's mass in moles by the volume of the solution in litres, is the most often used unit to represent solution concentration: litres of solution/moles of solute equals M.

moles = concentration x volume (in liters)

moles = 0.532 M x 0.300 L = 0.160 mol Sodium chloride

Therefore, there are 0.160 moles of Sodium chloride in 0.300 L of the stock solution.

When the stock solution is diluted to a final volume of 2.100 L, the number of moles of Sodium chloride remains the same. Therefore, there are still 0.160 moles of Sodium chloride in the final solution.

Moles of solute divided by the volume of solution is known as molarity (in liters)

We know that there are 0.160 moles of Sodium chloride in the final solution, and the final volume is 2.100 L.

Molarity = 0.160 mol / 2.100 L = 0.076 M

To know more about concentration visit:-

https://brainly.com/question/10725862

#SPJ1

It is possible that specific amino acid residues were incorporated into compound one based on their known ability to promote cell adhesion.

Examples of such residues could include arginine, lysine, and cysteine, which have been shown to interact with cell surface receptors and extracellular matrix proteins to promote cell attachment. It is also possible that other amino acid residues were incorporated based on their ability to enhance scaffold surface properties or bioactivity. Without more specific information about the composition of compound one, it is difficult to provide a more definitive answer.
Hi! To determine which amino acid residues were incorporated into compound one to promote cell adhesion on scaffold surfaces, specific information about the compound and the study would be needed.

However, some commonly used amino acid sequences for promoting cell adhesion include RGD (arginine-glycine-aspartic acid) and PHSRN (proline-histidine-serine-arginine-asparagine). These sequences can enhance cell attachment and spreading on scaffold surfaces in tissue engineering applications.

Visit here to learn more about cell adhesion brainly.com/question/30675896

#SPJ11

B) ln[A] vs time. For a second order reaction, the rate law can be written as rate = k[A]². Taking the natural logarithm of both sides yields ln(rate) = ln(k) + 2ln[A].

This can be rearranged to give the linear plot of ln[A] vs time with a slope of 2k and a y-intercept of ln(k). Therefore, the plot that will be linear for a second order reaction is B) ln[A] vs time.

A negative number results from any real integer that is more than 0 but less than 1. The output is zero when the input is 1. And last, any real number that is bigger than 1 leads to a positive number. Therefore, the set of all real numbers bigger than zero is the domain of the natural logarithm function.

We must make advantage of the characteristics of natural logarithmic and natural exponential functions in order to represent a function in terms of these functions.

With e (the natural number) as its base, the natural logarithmic function is represented by the symbol ln(x). E(x) stands for the natural exponential function.

Learn more about natural logarithm  here

https://brainly.com/question/31476577

#SPJ11

Based on the information provided, when silver metal (Ag) is placed in a blue solution of copper(II) nitrate (Cu(NO3)2), no reaction occurs. This indicates that silver is less reactive than copper (Cu). Therefore, Cu is more reactive than Ag.

In the given scenario, when silver metal is placed in a blue solution of Cu(NO3)2, nothing happens. This indicates that copper is more reactive than silver. If silver were more reactive than copper, it would displace the copper ions from the solution and form silver nitrate, and we would observe a reaction taking place.

The reactivity series of metals arranges them in order of their reactivity with the most reactive metals at the top and the least reactive at the bottom. Based on this series, copper is less reactive than silver. However, in the given scenario, we are comparing the reactivity of copper and silver in a specific situation where copper ions are already present in the solution.

The reactivity of metals can depend on many factors, such as the specific conditions in which they are placed, the presence of other substances, and the chemical reactions that take place. In this case, the presence of copper ions in the solution can make copper more reactive than silver.

Therefore, we can conclude that copper is more reactive than silver in this specific situation where silver is placed in a blue solution of Cu(NO3)2 and nothing happens.

To learn more about copper, refer:-

https://brainly.com/question/13677872

#SPJ11

Based on the observation that nothing happens when silver metal is placed in a blue solution of Cu(NO3)2, it can be inferred that copper (Cu) is more reactive than silver (Ag). This is because copper ions (Cu2+) in the solution are not displaced by the silver metal, indicating that the copper ions are more strongly attracted to electrons than the silver metal.

The fact that no reaction occurs when silver is placed in the copper nitrate solution indicates that silver is less reactive than copper. In a reaction where a more reactive metal is placed in a solution of a less reactive metal's salt, the more reactive metal will displace the less reactive metal from its salt.

Therefore, copper is more likely to undergo redox reactions than silver.
To know more about redox reactions:

https://brainly.com/question/13978139

#SPJ11

When elements chemically combine, the resulting compound has (b) different properties from the uncombined elements. This is due to the formation of new chemical bonds that result in a unique arrangement of atoms with different physical and chemical properties than the individual elements.

The compound will have a distinct set of physical and chemical properties, such as melting and boiling points, solubility, reactivity, and density, that differ from those of its component elements. The ratio of atoms in a compound is fixed and can be expressed by a chemical formula, which reflects the unique arrangement of atoms within the compound.

Thus, the combination of elements leads to the formation of a new substance with its own unique set of properties that distinguish it from the original elements.

To know more about the resulting compound refer here :

https://brainly.com/question/1194985#

#SPJ11

The solution's molarity is determined to be 0.1176 M.

There are 0.003528 moles in 30 ml of solution.

The new solution has a molarity of 0.105 M.

The number of moles of solute per specified number of litres of solution is known as the molarity in chemistry, where it is used to measure concentration.

a. The solution's molarity:

Molarity = moles/volume

Moles = Mass/Molecular mass

Moles = 5.52/187.56

Moles = 0.0294 mol.

Molarity = 0.0294/0.25

Molarity = 0.1176 M

b. 30 ml of solution has how many moles

Molarity = moles/volume

0.1176 = moles/0.03

Moles = 0.003528 mol.

c. To determine a fresh solution's molarity:

M₁V₁ = M₂V₂

0.1176 × 0.25 = M₂ × 0.28

0.0294 = 0.28M₂

M₂ = 0.105 M

To know more about molarity, visit:

brainly.com/question/8732513

#SPJ1

The half-life of a radioactive kind of mercury is 64 hours. If you start with 93,568 grams of it, 2924 grams is the mass that will be left after 320 hours.

In physics, mass is a quantitative measurement of inertia, a basic characteristic of all matter. It essentially refers to a body of matter's resistance to changing its speed or location in response to the application of a force. The change caused by an applied force is smaller the more mass a body has. The kilogramme, which is defined in terms of Planck's constant, is the unit of mass in the International System of Units (SI). The kilogramme is established by precise measurements of Planck's constant since the second and the metre have previously been defined in terms of other physical constants.

320 hours ÷ 64 hours/half-life = 5 half-lives

Amount remaining = (original amount) x (1/2)^(number of half-lives)

Amount remaining = 93,568 grams x (1/2)^5

Amount remaining = 93,568 grams x 0.03125

Amount remaining = 2924 grams

To know more about mass, here:

https://brainly.com/question/11954533

#SPJ12