To calculate the nominal current per phase for a 3-phase, 75 hp, 440 v induction motor, we need to use the following formula:
I = P / (sqrt(3) x V x EFF x PF)
Where:
I = Current per phase
P = Power in horsepower (75 hp)
V = Voltage (440 V)
EFF = Full-load efficiency (91%)
PF = Power factor (83%)
Plugging in the values, we get:
I = 75 / (sqrt(3) x 440 x 0.91 x 0.83)
I = 75 / (1.732 x 440 x 0.91 x 0.83)
I = 75 / 480.77
I = 0.156 A (rounded to three decimal places)
Therefore, the nominal current per phase for the given 3-phase, 75 hp, 440 v induction motor is 0.156 A. It's worth noting that this value is for full load conditions, and the actual current may vary depending on the motor's load and operating conditions.
We will find the nominal current per phase for a 3-phase, 75 hp, 440 V induction motor with a full-load efficiency of 91% and a power factor of 83%.
Step 1: Convert horsepower (hp) to watts (W).
1 hp = 746 W
75 hp × 746 W/hp = 56,070 W
Step 2: Calculate the input power.
Input power = Output power / Efficiency
Input power = 56,070 W / 0.91 = 61,593.41 W
Step 3: Calculate the total apparent power (S).
Apparent power = Input power / Power factor
S = 61,593.41 W / 0.83 = 74,215.44 VA
Step 4: Calculate the line voltage.
Line voltage = Phase voltage × √3
Line voltage = 440 V × √3 = 762.0 V
Step 5: Calculate the nominal current per phase.
Nominal current = Apparent power / (Line voltage × √3)
Nominal current = 74,215.44 VA / (762.0 V × √3) = 60.4 A
So, the nominal current per phase for this 3-phase, 75 hp, 440 V induction motor with a full-load efficiency of 91% and a power factor of 83% is approximately 60.4 A.
To know more about nominal current per phase visit:
https://brainly.com/question/30352732
#SPJ11
This concept is based on both an asset's importance to national security, and the effect of its partial or complete loss:
a. Criticality
b. Threat
c. Vulnerability
The concept you're referring to, which is based on both an asset's importance to national security and the effect of its partial or complete loss, is: a. Criticality
Criticality refers to the degree to which an asset or system is essential to the national security interests of a country. It takes into account both the asset's importance and the potential consequences of its partial or complete loss. Threat, on the other hand, refers to the likelihood or probability of an attack or other type of adverse event occurring that could cause harm to a system or asset. Vulnerability, meanwhile, refers to the weaknesses or gaps in security or protection that could be exploited by a threat actor to compromise or damage an asset or system. Therefore, while threat and vulnerability are important factors to consider when assessing criticality, they are not the same as criticality itself. Criticality is a broader concept that encompasses both the importance of an asset and the potential consequences of its loss, regardless of the specific threats or vulnerabilities involved.
Learn more about asset here-
https://brainly.com/question/14404094
#SPJ11
Except in a casr of a concrete encased driven or buried grounding electrode, the connection of a grounding electrode conductor to a grounding electrode shall be ____________.
250.68(a)
According to the National Electrical Code (NEC) 250.68(a), the connection of a grounding electrode conductor to a grounding electrode shall be made in a manner that will ensure a permanent and low-impedance grounding path.
This means that the connection should be made in a way that ensures good conductivity and does not easily loosen or break over time.
The NEC further specifies that the connection should be made by exothermic welding, listed lugs, listed pressure connectors, listed clamps, or other listed means. These methods of connection ensure a reliable and low-impedance grounding path that can withstand the effects of weather, corrosion, and physical stress.
In the case of a concrete encased driven or buried grounding electrode, the connection should be made by one of the methods listed above, and the grounding electrode conductor should be connected to the electrode by welding, brazing, or by use of a listed clamp that exerts pressure on the electrode.
This ensures a reliable and low-impedance grounding path for the system.
Learn more about grounding electrode here:
https://brainly.com/question/31494083
#SPJ11
What type of firewall security feature limits the volume of traffic from individual hosts?A. Loop protectionB. Network separationC. Stateful inspectionD. Flood guard
The firewall security feature that limits the volume of traffic from individual hosts is called "Flood guard".
This feature is used to prevent denial of service attacks by limiting the amount of traffic that can be sent from a particular host to the network. Stateful inspection is a firewall security feature that examines the traffic and keeps track of the state of each connection.
Loop protection is used to prevent network loops by disabling a port when a loop is detected. Network separation is a security feature that isolates different parts of the network to prevent unauthorized access. The firewall security feature that limits the volume of traffic from individual hosts is D. Flood guard.
Flood guard is designed to prevent excessive traffic or Denial of Service (DoS) attacks by limiting the volume of traffic from individual hosts. This feature helps maintain the stability and security of a network.
Note: While the terms "loop," "stateful," and "firewall" are relevant to network security, they are not directly associated with the specific security feature that limits traffic volume from individual hosts as mentioned in the question.
Learn more about network click here:
brainly.com/question/14276789
#SPJ11
A seal rockChoose one:A. is a necessary ingredient of an oil trap.B. is commonly made of fractured limestone or poorly cemented sandstone.C. must lie beneath the reservoir rock in a trap to keep oil from filtering downward.D. has high porosity and high permeability
B. A seal rock is commonly made of fractured limestone or poorly cemented sandstone.
Seal rocks are formations that act as barriers, preventing the flow of hydrocarbons out of an oil or gas reservoir. They are typically made of impermeable rock, such as shale or siltstone, but can also be made of fractured limestone or poorly cemented sandstone. These types of rocks are less effective at sealing than impermeable rock, but can still provide a significant barrier to the flow of hydrocarbons. Fractured limestone or poorly cemented sandstone can still provide a good seal because their pores are filled with fine-grained sediment, which can slow the movement of fluids through the rock. However, these rocks are not as reliable as impermeable rock, and may require additional sealing mechanisms, such as natural gas, to prevent the flow of hydrocarbons out of the reservoir.
Learn more about Seal rocks here:
https://brainly.com/question/31100773
#SPJ11
A sine wave has two maximum points (peaks) in one cycle.
How many maximum points does a sine wave have during one cycle?
A sine wave has two maximum points (peaks) during one cycle: one positive maximum and one negative maximum.
A sine wave's peak to peak value is twice its peak value. As a result, the waveform's total peak to peak value is 2 x 80 VAC, or 160 VAC.
A sine wave's peak to peak value is a crucial indicator of the waveform's amplitude. It is determined by multiplying the waveform's peak value by two. Given that the peak value of this specific waveform is 80 VAC, its peak to peak value is 2 x 80 VAC, or 160 VAC. This peak to peak value represents the total number of voltage swings experienced by the waveform from its base to its crest. This waveform's peak to peak value is a helpful
Learn more about peaks here
https://brainly.com/question/30491931
#SPJ11
A _____ is a process that ensures an applicant possesses the skills needed for a particular job.
a. accreditation
b. diploma
c. certification
d. commendation
Answer:
c.certification
Explanation:
hope this helps!
imagine that you're a musician and you are asked to synthesize some upbeat music for a modern ballet. for this project. you would most likely work with ________________ music.
For this project, as a musician synthesizing upbeat music for modern ballet, I would most likely work with electronic or techno music.
These genres offer a range of sounds and beats that can be manipulated and synthesized to create a unique and energetic sound for the dance performance. Additionally, electronic and techno music has been used in many modern ballets and contemporary dance performances, making them a popular choice for this type of project.
As a musician tasked with synthesizing upbeat music for modern ballet, you would most likely work with electronic dance music. This genre often incorporates synthesizers and can create an energetic atmosphere suitable for a contemporary ballet performance.
To know more about musicians synthesizing:- https://brainly.com/question/4810930
#SPJ11
Hi! As a musician asked to synthesize upbeat music for a modern ballet, you would most likely work with electronic dance music.
This genre is known for its energetic and lively rhythms, making it a suitable choice for a contemporary modern ballet performance.
Learn more about modern ballet: https://brainly.com/question/24643077
#SPJ11
What is the advantage of taking the output from the stator in a rotating field altenator? the brushes do not have to handle the ouput current.
An alternator is an electrical generator that converts mechanical energy into electrical energy. The output of the alternator is typically alternating current (AC), which is produced by rotating a magnetic field within the stator.
A rotating field alternator current changes the flow in the output windings by rotating the magnetic field around the stator. In a rotating field alternator, one notable benefit of taking the output from the stator is that the brushes are not required to manage the output current. Electrical contacts called brushes are used by the generator's stationary and revolving components to transfer electricity. The large currents and friction produced during operation cause the brushes in conventional generators to deteriorate over time. The brushes are removed when the output is taken straight from the stator windings, lowering maintenance requirements and boosting generator dependability.
A rotating field alternator also has the benefit of generating a more reliable and consistent
Learn more about alternating current (AC) here
https://brainly.com/question/30675305
#SPJ11
Which type of wireless security makes use of dynamic encryption keys each time a client associates with an AP?
The type of wireless security that makes use of dynamic encryption keys each time a client associates with an AP is called WPA2-PSK or WPA2-Enterprise.
The type of wireless security that makes use of dynamic encryption keys each time a client associates with an AP is called WPA2-PSK (Wi-Fi Protected Access 2 with Pre-Shared Key) or WPA2-Enterprise. These encryption keys are generated on the fly and are unique to each client and session, which greatly enhances the overall security of the wireless network. This type of security is particularly effective against unauthorized access attempts and eavesdropping attacks, as it ensures that the data transmitted over the wireless network is always encrypted and protected.
Learn more about encryption keys here
https://brainly.com/question/29572224
#SPJ11
8) If the auditor lacks independence, a disclaimer of opinion must be issued
A) if the client requests it.
B) only if it is highly material.
C) only if it is material but not pervasive.
D) in all cases.
D) In all cases. If the auditor lacks independence, it means they are not able to perform their duties objectively and impartially regarding the information.
This lack of independence is considered pervasive, which means it affects the entire audit. Therefore, a disclaimer of opinion must be issued in all cases where independence is lacking, regardless of whether the client requests it or the materiality of the issue.
The disclaimer states that due to information limitations in the investigation, the auditor cannot satisfy himself that all financial statements fairly represent the auditor's work with the client or that the relationship is not independent according to the assessment criteria. For an audit to be effective, the external auditor must be independent of facts and values and take all reasonable steps to comply with audit standards and acceptability as prescribed by the AICPA or, if applicable, the Public Company Accounting Oversight Board. (PCAOB).
Learn more about information:
brainly.com/question/31059452
#SPJ11
1) What category of audit report will be issued if the auditor concludes that the financial statements are not fairly presented?
A) disclaimer B) qualified C) standard unmodified opinion
D) adverse
D) Adverse. An adverse audit report is issued when the auditor concludes that the financial statements are not fairly presented and cannot be relied upon.
According to the audit reports guide, there are four types of audit reports that auditors can issue after examining the financial statements of a company. These are:
- Unqualified audit report: This is the best type of audit report that a company can receive. It means that the auditors found no material misstatements in the financial statements and they are prepared and presented fairly in accordance with the applicable accounting standards. The auditors express an unqualified or clean opinion on the financial statements¹².
- Adverse audit report: This is a type of audit report that indicates that the auditors found material and pervasive misstatements in the financial statements that affect their overall reliability and accuracy. The misstatements can be due to errors, fraud, non-compliance, or significant disagreements with the management. The auditors express an adverse or negative opinion on the financial statements, meaning that they do not present fairly the financial position, performance, and cash flows of the company¹².
Therefore, based on this information, the answer to your question is: **D) adverse**. An adverse audit report will be issued if the auditor concludes that the financial statements are not fairly presented.
Learn more about audit report here:
brainly.com/question/29354364
#SPJ11
Interior metal water piping located more than ______ feet from the point of entrance to the building shall not be used as part of the grounding electrode system.
Interior metal water piping located more than 5 feet from the point of entrance to the building shall not be used as part of the grounding electrode system. This is because the farther the interior metal water piping is from the entrance point.
The less effective it is at conducting electrical currents and providing a stable grounding connection. It is important to have a proper grounding electrode system in place to protect against electrical hazards and ensure the safe operation of electrical equipment.
According to the National Electrical Code (NEC), interior metal water piping located more than 5 feet from the point of entrance to the building shall not be used as part of the grounding electrode system.
Learn more about the electrodes here:- brainly.com/question/17060277
#SPJ11
Biometric access control systems used individually unique characteristics such as fingerprints and voice to authenticate that an individual is authorized to gain access onto a designated area. True or False?
True. Biometric access control systems utilize individually unique characteristics, such as fingerprints and voice, to authenticate that an individual is authorized to gain access to a designated area.
Biometric access control systems are designed to authenticate the identity of an individual based on their unique biological or behavioral characteristics such as fingerprints, voice, iris or facial features. These systems are more secure than traditional authentication methods such as passwords or PINs, as biometric traits are unique to each individual and cannot be easily replicated or stolen. By using a biometric access control system, only authorized individuals with registered biometric data can gain access to the designated area.
Learn more about data here-
https://brainly.com/question/13650923
#SPJ11
(342-42(A)) Threadless couplings approved for use with intermediate etal conduit in wet locations shall be of the _____ type.
Threadless couplings that are approved for use with intermediate metal conduit in wet locations shall be of the compression type. This is specified in section 342-42(A) of the National Electrical Code (NEC) which outlines the requirements for electrical installations in wet locations. Threadless couplings are a type of connector that join two lengths of conduit together without the need for threading. This type of coupling is commonly used with intermediate metal conduit, which is a type of electrical conduit that is typically used for exposed or outdoor installations.
In summary, when using intermediate metal conduit in wet locations, it's essential to use rain-tight threadless couplings to maintain a secure connection and prevent moisture ingress. This ensures the electrical system's safety and proper functioning.
Learn more about rigid metal conduit here: brainly.com/question/30772913
#SPJ11
To reach an evaporator for cleaning, remove the _______________ from the air handler.
To reach an evaporator for cleaning, you need to remove the access panel or cover from the air handler.
How to reach an evaporator for cleaningTo clean an evaporator coil in an air conditioning system, you typically need to remove the access panel from the air handler unit. The evaporator coil is located inside the air handler unit, which is usually found in an indoor closet, attic, or basement.
This will allow you to access the evaporator coils, which are typically located inside the air handler unit. It is important to turn off power to the air handler before removing the access panel and proceeding with cleaning to avoid electrical shock.
Learn more about evaporator at https://brainly.com/question/2013258
#SPJ1
Flexible cords and cables ________ run through holes in walls, structural ceiling, suspended ceilings, dropped ceilings, or floors.
400.8(2)
Flexible cords and cables may run through holes in walls, structural ceiling, suspended ceilings, dropped ceilings, or floors in accordance with the guidelines outlined in section 400.8(2) of the National Electric Code.
These guidelines ensure that the cords and cables are installed in a safe and secure manner and do not pose a risk of damage or fire hazard to the surrounding structure.Flexible cords and cables shall not be run through holes in walls, structural ceiling, suspended ceilings, dropped ceilings, or floors. This is specified in section 400.8(2) of the National Electrical Code (NEC).
To learn more about cables click the link below:
brainly.com/question/28168763
#SPJ11
What is the major deterrent to the widespread use of desalination?
The major deterrent to the widespread use of desalination is its high cost, as well as the environmental impact of the process. Desalination plants require significant energy to operate and can harm marine life with their intake and discharge systems.
While it is a promising solution for areas facing water scarcity, finding ways to make the process more affordable and sustainable is key to its widespread adoption.
Thus, the major deterrent to the widespread use of desalination is the high cost associated with the process. Desalination requires significant energy consumption and advanced infrastructure, which can be expensive to build and maintain, limiting its adoption on a larger scale.
Learn more about desalination here:- brainly.com/question/26016496
#SPJ11
A particular telnet site does not appear to be responding on a Windows 7 computer. What command could the technician use to show any cached DNS entries for this web page?
The technician could use the "ipconfig /displaydns" command in the command prompt to show any cached DNS entries for the telnet site.
The technician could use the "ipconfig /displaydns" command in the command prompt to show any cached DNS entries for the telnet site. This will display a list of all recently accessed DNS entries, including the telnet site in question. If the entry is outdated or incorrect, the technician can then flush the DNS cache using the "ipconfig /flushdns" command to ensure that the computer obtains the correct DNS information for the telnet site.
Learn more about command here
https://brainly.com/question/30319932
#SPJ11
In Class I - Division 2 at motor fuel dispensing facilities or commercial garages the distance shall have least _______ feet of ant edge, extending in any direction.
514.3 (B)(2)
The National Electrical Code (NEC) is a standard set of safety requirements for electrical installations in the United States. Section 514.3(B)(2) of the NEC provides requirements for the installation of electrical equipment in Class I, Division 2 locations in motor fuel dispensing facilities.
Class I, Division 2 locations are areas where flammable gases or vapors are present in quantities sufficient to create a hazardous atmosphere. In such locations, it is important to take precautions to prevent the ignition of these gases or vapors, which could result in an explosion or fire.To minimize the risk of ignition, section 514.3(B)(2) requires that electrical equipment in Class I, Division 2 locations at motor fuel dispensing facilities or commercial garages must be installed with at least 10 feet of clearance to any edge, extending in any direction. This clearance is intended to prevent accidental contact with electrical equipment and reduce the risk of sparking or arcing, which could ignite flammable gases or vapors.
Learn more about installation here
https://brainly.com/question/13267432
#SPJ11
Where the number or current- carrying conductors in a raceway or cable, when it exceeds the allowable ampacity of each conductor it shall be ________.
310.15(b)(3)
Where the number or current-carrying conductors in a raceway or cable, when it exceeds the allowable ampacity of each conductor it shall be derated. This is stated in section 310.15(b)(3) of the National Electrical Code (NEC).
Current-carrying conductor: a conductor which carries the electric current under normal conditions [this term is defined in the IEC TS 62257-5-2015].Current-carrying conductor: a conductor which carries the electric current under normal conditions [this term is defined in the IEC TS 62257-5-2015].
Note 1 to entry: The line conductor (L), the neutral conductor (N), the mid conductor (M), the PEN conductor, the PEM conductor and the PEL conductor are the current-carrying conductors. The protective conductor (PE) is not the current-carrying conductor.
A protective conductor under normal conditions conducts almost no electric current, because there are no faults and no induced currents, such as earth fault currents. Therefore, it is not considered a current-carrying conductor and is not included in the total number of conductors in electrical circuits, networks and systems.
learn more about raceway here:
https://brainly.com/question/30821238
#SPJ11
It is okay to download information without asking a lab instructor as long as it is for your online class. true
false
False. It is advisable to follow guideline outline by the lab or consult the lab instructor before downloading.
Why are some of the guideline in place for student when downloading?There may be unique guidelines and limitations on obtaining data or visiting particular websites at some institutions or labs. To avoid any potential problems, always verify with your lab instructor or follow the specified instructions.
These download guidelines have been put in place to avoid downloading information that might be considered sensitive, illegal, or detrimental to the operating systems.
Find more exercises on download information guidelines;
https://brainly.com/question/30024121
#SPJ4
T/F : All cleared DoD civilian, military, and contractor personnel who generate or create classified material from
authorized classified sources are derivative classifiers.
True. All cleared DoD civilian, military, and contractor personnel who generate or create classified material from authorized classified sources are derivative classifiers.
The United States Department of Defense (DoD) is a federal agency responsible for providing the military forces needed to deter war and protect the security of the country. The DoD is the largest employer in the world, with over 1.3 million active-duty service members, more than 800,000 civilian personnel, and over 800,000 reserve and National Guard members. The DoD operates under civilian control and is led by the Secretary of Defense, who is a member of the President's Cabinet. The department's responsibilities include providing military forces for the protection of the nation, managing military operations and readiness, conducting research and development, and managing military installations and facilities. The DoD also works closely with other federal agencies, including the Department of State and the Department of Homeland Security, to coordinate national security efforts.
Learn more about DoD here:
https://brainly.com/question/30324752
#SPJ11
What is the protocol that is used to discover a physical address from a known logical address and what message type does it use?
The protocol used to discover a physical address from a known logical address is Address Resolution Protocol (ARP). ARP uses a message type called ARP request to obtain the physical address corresponding to a logical address.
When an ARP request is sent, it is broadcasted to all devices on the local network, and the device with the matching logical address will respond with an ARP reply containing its physical address.The protocol used to discover a physical address from a known logical address is the Address Resolution Protocol (ARP). ARP uses a message type called an ARP Request to query for the corresponding physical (MAC) address of a given logical (IP) address.
Learn more about physical here
https://brainly.in/question/817604
#SPJ11
(354-10) The use of nonmetallic conduit with conductors shall be permitted for direct burial underground installation; in cinder fill; or encased or embedded in concrete.(True/False)
The statement given in the question is true. The National Electrical Code (NEC) permits the use of nonmetallic conduit with conductors for direct burial underground installation, in cinder fill, or encased or embedded in concrete. This allowance is specified in Article 353 of the NEC, which outlines the requirements for nonmetallic underground conduit systems.
For such more question on nonmetallic
https://brainly.com/question/2834632
#SPJ11
Where flexible tubing is used to enclose the conductors, the tubing shall extend from the last insulating to not less than _________ inches.
314.18(c)
Where flexible tubing is used to enclose the conductors, the tubing shall extend from the last insulating to not less than 6 inches. This requirement is stated in section 314.18(c) of the National Electrical Code (NEC).
Electricity can flow through metals, molten ionic compounds, and electrolyte solutions.
The letters that complete the gaps are;
Non-conductor conductor other than conductorsNon-conductor conductorsConductor DecreasesConductorsBecause there are available free electrons within metals, they act as conductors.
An ionic solid is not a conductor because the ions, which are the charge carriers, are tied together in the lattice.
The crystal breaks apart in the molten state, releasing its ions. The molten ionic material is a conductor as a result.
Because mobile ions are charge carriers in solution, electrolyte solutions like HCl transmit electricity. The number of ions in the solution reduces as the solution's concentration rises.
Learn more about conductors here
https://brainly.com/question/18084972
#SPJ11
The output of a PLC counter is energized when the:a. accumulated count equals the preset count.b. preset count is greater than the accumulated count.c. counter input rung is true.d. counter input rung is false.
The correct answer is (a) accumulated count equals the preset count.
PLC (Programmable Logic Controller) counters are used in automation systems to count the number of events or occurrences of an input signal.
The output of a counter is energized when the count reaches a predetermined value set by the programmer, which is known as the preset count.In other words, the counter accumulates the number of events as they occur and compares it with the preset count. When the accumulated count equals the preset count, the counter output is energized, indicating that the predetermined number of events has been reached.The counter input rung determines when the counter starts counting and when it stops. If the input rung is true, the counter will start counting, and if the input rung is false, the counter will stop counting. However, this does not affect the output of the counter directly.In conclusion, the output of a PLC counter is energized when the accumulated count equals the preset count. This is the most important condition to be met for the counter to activate its output. The counter input rung determines when the counter starts and stops counting, but it does not affect the output of the counter directly.For such more question on automation
https://brainly.com/question/30088157
#SPJ11
5. TCP stands for_____?A. Transmission control protocolB. Tapioca coconut puddingC. Translation of career pathwayD. Topical control pathogen
The answer is A. Transmission Control Protocol. TCP stands for Transmission Control Protocol, which is a standard Internet protocol that governs how data is transmitted over the internet. TCP works together with another protocol, IP (Internet Protocol), to ensure reliable and efficient delivery of data packets between networked devices.
TCP is a connection-oriented protocol, which means that it establishes a reliable and error-checked communication channel between two endpoints before transmitting data.
This ensures that data is transmitted in the correct order, without loss or duplication, and with error detection and correction.
TCP is used extensively in various applications, such as web browsing, file transfer, email, and multimedia streaming. It is a fundamental protocol that underpins the functioning of the internet and enables reliable communication between devices across different networks.
Overall, TCP is an essential protocol for the efficient and secure transmission of data over the internet, and it plays a crucial role in ensuring that users can access and share information reliably and efficiently.
Learn more about Transmission Control Protocol here:
https://brainly.com/question/9979148
#SPJ11
Q5)g) Describe the four-step handshake in TCP connection closes.
Answer: The four-step handshake is a process used by the Transmission Control Protocol (TCP) to close a connection between two devices. Here are the steps involved:
1. The first step is initiated by the device that wants to close the connection. This device sends a FIN (finish) packet to the other device, indicating that it is done sending data.
2. The other device receives the FIN packet and sends back an ACK (acknowledgment) packet to confirm that it received the FIN packet.
3. The other device then sends its own FIN packet to the first device, indicating that it is also done sending data.
4. Finally, the first device sends an ACK packet back to the other device to confirm that it received the FIN packet.
Once the four-step handshake is complete, the connection is closed and the devices can no longer communicate using that connection. I hope this helps! Let me know if you have any other questions.
Hi! I'd be happy to help you understand the four-step handshake in TCP connection closures. The four-step handshake, also known as the TCP connection termination process, is a series of steps that ensures a reliable and orderly closing of a TCP connection between two devices. Here's a step-by-step explanation:
1. **FIN (Finish) Packet**: The device initiating the termination sends a TCP packet with the FIN flag set to the receiving device, indicating its intention to close the connection. This means the sender has finished transmitting data.
2. **ACK (Acknowledgment) Packet**: The receiving device acknowledges the FIN packet by sending an ACK packet back to the sender. The ACK packet has an acknowledgment number that is one greater than the received sequence number, confirming the receipt of the FIN packet.
3. **FIN (Finish) Packet from the receiving device**: After sending the ACK packet, the receiving device sends its own FIN packet to the sender, signaling that it has also finished transmitting data and is ready to close the connection.
4. **ACK (Acknowledgment) Packet from the sender**: The sender acknowledges the receiving device's FIN packet by sending a final ACK packet. The acknowledgment number is one greater than the received sequence number, confirming receipt of the FIN packet from the receiving device.
Once this process is completed, the TCP connection is terminated, and both devices can release the associated resources. The four-step handshake ensures that both devices have finished transmitting data and are ready to close the connection in a reliable and orderly manner.
Learn more about connection here brainly.in/question/3996940
#SPJ11
Explanation:
The four-step handshake, also known as the TCP connection termination process, is a series of steps that ensures a reliable and orderly closing of a TCP connection between two devices. Here's a step-by-step explanation:
1. **FIN (Finish) Packet**: The device initiating the termination sends a TCP packet with the FIN flag set to the receiving device, indicating its intention to close the connection. This means the sender has finished transmitting data.
2. **ACK (Acknowledgment) Packet**: The receiving device acknowledges the FIN packet by sending an ACK packet back to the sender. The ACK packet has an acknowledgment number that is one greater than the received sequence number, confirming the receipt of the FIN packet.
3. **FIN (Finish) Packet from the receiving device**: After sending the ACK packet, the receiving device sends its own FIN packet to the sender, signaling that it has also finished transmitting data and is ready to close the connection.
4. **ACK (Acknowledgment) Packet from the sender**: The sender acknowledges the receiving device's FIN packet by sending a final ACK packet. The acknowledgment number is one greater than the received sequence number, confirming receipt of the FIN packet from the receiving device.
Once this process is completed, the TCP connection is terminated, and both devices can release the associated resources. The four-step handshake ensures that both devices have finished transmitting data and are ready to close the connection in a reliable and orderly manner.
Learn more about connection here brainly.in/question/3996940
#SPJ11
(372-13) When an outlet is discontinued, abandoned or removed from a cellular concrete floor raceway, the sections of circuit conductors supplying the outlet shall be removed from the raceway.(True/False)
The answer is True. When an outlet is discontinued, abandoned or removed from a cellular concrete floor raceway, the sections of circuit conductors supplying the outlet shall be removed from the raceway. Based on the information provided.
Always choose conductors for a circuit conductors that are not smaller than the "minimum ampacity" of the apparatus.
By doing this, the conductor is guaranteed to be able to properly withstand the current flowing through it without overheating or harming the circuit or other machinery.
Based on the anticipated load and installation circumstances, the National Electrical Code (NEC) provides ampacity tables and formulas to assist electricians and designers in choosing the proper conductor size. It is crucial to remember that choosing a conductor that is too tiny for the load it will carry can lead to overheating, equipment damage, and even fire hazards, while choosing a conductor that is too large will result in higher material and installation expenses.
Learn more about circuit conductors here
https://brainly.com/question/31566492
#SPJ11
Bending radius in type AC shall be made not to be damaged and of the curve of the inner edge of any bend shall not be less than _________ times in diameter of the cable.
325.24
The bending radius in type AC cable should be made to prevent damage, and the curve of the inner edge of any bend should not be less than 5 times the diameter of the cable, as specified in the NEC section 320.24.
Pull the cord to unplug them from the outlet was one of the other answers to the question. Carry them by the cord, option C. D) Keep them close to outlets and on the prevent damage work table in a location that is simple to reach.
Read the manufacturer's directions for proper usage and maintenance of your tools to avoid harm.
These days, tools are pricey. Because of this, if you want to use them for a long time, you must take good care of them and use them appropriately. You must first study the manufacturer's instructions for the use and upkeep of the tool because of its complexity. By doing so, you'll make the most of their potential and employ them more effectively for the right tasks.
Learn more about prevent damage here
https://brainly.com/question/11156977
#SPJ11