An extranet is a safe network that links the intranets of business partners so that there can be communication between the two enterprises. An extranet is a private network that organizations utilize to give dependable outside parties, such partners, customers, suppliers, and vendors, secure, restricted access to business data or processes.
What is intranet?
A private network website used within a company is known as an intranet. The same protocol as a web page is used by an intranet website. Using a broadband Internet connection in place of a traditional phone line, Voice over Internet Protocol is a technology that enables voice calls.
Both are employed in the exchange and network-based sharing of data, documents, files, and folders Both networks are accessible through browsers.
To learn more about extranet from given link from given link
brainly.com/question/13263185
#SPJ4
A strip footing 2.5 m wide is loaded on the ground surface with a pressure equal to 175 kPa. Calculate the stress distribution at depths of 2.5, 7.5 and 12.5 m under the center of the footing. If the footing rested on a normally consolidated cohesive layer whose Cc was 0.612 and whose e0 was 1.35 , estimate the settlement of the footing. Assume S = 100%,γ’ = 7.5 kN/m3 , and the total clay layer thickness beneath the footing = 15 m.
A Caterpillar D11R will have little trouble removing this material because the upper stratum has a low seismic wave velocity of 2,000 ft/sec (600 m/sec). 41 feet (12 m) (12 m)
V2 = (300 feet)/(0.07 0.04) = 10,000 feet per second (3,000 m per second)
Calculating the trip time at the intersection of the straight line segments V1 and V2: Travel time is calculated as 0.04 + (100)/10,000 ft/sec = 0.05 sec.
V1 = 2,000 ft/sec (600 m/s) = 100 ft/0.05 sec
sin = V1/V2, which is equal to 2,000/10,000 = 0.2, or = 11.5°
H1 is equal to [(T1V1)/(2cos )] = [(0.04)(2,000)] 41 feet /(2 cos 11.5°) (12 m)
Using the equation below to check, where d′=100 feet (30.5 m)
H1 equals 12 d′ [(V2 V1)/(V2 + V1)].
½ = ½ (100) [(10,000 − 2,000)/ (10,000 + 2,000)]
Learn more about time here-
https://brainly.com/question/17888065
#SPJ4
a six pulse scr controlled rectifier is supplied with 13.8 kv from a 1 mva transformer. the transformer is connected wye-wye and its reactance is 10%. the transformer secondary is rated 6000 v. the rectifier load is 900 kw (dc) at 7600 v. estimate the supply current component at 300 hz on the transformer high side.
The supply current component at 300 Hz on the transformer high side is 0.0591A.
What is transformer?
A transformer is indeed a passive part that moves electrical energy between circuits, whether they be single circuits or multiple circuits. The electromotive force (EMF) across all other coils pierced around the same core changes in response to changes in the current flowing through any one of the transformer's coils, which causes changes in the magnetic flux with in transformer's core. Without a metallic (conductive) connecting the two circuits, electrical energy can be transmitted between different coils. The 1831 discovery of Faraday's law of induction defines the voltages effect in any coil as the result of a fluctuating magnetic flux surrounding the coil.
The supply current component at 300 Hz on the transformer high side can be estimated as follows:
1. Calculate the total current drawn by the rectifier load:
The total current drawn by the rectifier load is calculated as follows:
Iload = Pload/Vdc = 900kW/7600V = 118.18 A
2. Calculate the total transformer secondary current:
The total transformer secondary current is calculated as follows:|
Isec = Iload/KVA = 118.18A/1MVA = 0.11818 A
3. Calculate the transformer primary current:
The transformer primary current is calculated as follows:
Ipri = Isec * (Vpri/Vsec) * (1 + X/100) = 0.11818A * (13.8kV/6kV) * (1 + 10/100) = 0.3545 A
4. Calculate the supply current component at 300 Hz on the transformer high side:
The supply current component at 300 Hz on the transformer high side is calculated as follows:
Isupply = Ipri/6 = 0.3545A/6 = 0.0591 A
Therefore, the supply current component at 300 Hz on the transformer high side is 0.0591A.
To learn more about transformer
https://brainly.com/question/29665451
#SPJ4
According to the Maxwellian speed distribution, As the Temperature increases the Number of molecules with speeds within a small interval near the most probable speed increase According to the Maxwellian speed distribution, As the Temperature increases the Number of molecules with speeds within a small interval near the most probable speed increase
It is a false statement because, based on the Maxwellian speed distribution, as the temperature increases the number of molecules with speeds within a small interval near the most probable speed decreases.
The Maxwell speed distribution defines the number of molecules that are moving at a specific speed at a particular temperature. Besides the average speed, and the root-mean-square speed, the Maxwell speed distribution also describes the most probable speed - the speed at which distribution curve reaches its maximum..
According to Maxwell's law of distribution of molecular speeds, with the increase in temperature the number of molecules with speeds within a small interval near the most probable speed decreases.
"
Complete question:
According to the Maxwellian speed distribution, As the Temperature increases the Number of molecules with speeds within a small interval near the most probable speed increase
True
False
"
You can learn more about Maxwell speed distribution at
https://brainly.com/question/29632619
#SPJ4
you are the network administrator for a small consulting firm. the firm has recently rolled out a new intranet site, and you are responsible for configuring the dns.you are able to connect to the intranet site by using the ip address, but you cannot connect by using the hostname.which of the following do you need to configure to access the site with the hostname?
Option A needs to be set up so that the website may be visited using the hostname: Zone of forward lookup
Forward DNS works when a user types a text-based email address or web page URL. This message is first delivered to a DNS server. The DNS server returns the domain's IP address after performing a record check. If the DNS server is unable to locate the domain's IP address, it forwards the request to another server. Forward lookup zones translate names into IP addresses, whilst reverse lookup system do the opposite. When your DNS server is unable to provide an authoritative response to a request, forwarders can be used to forward the request.
Learn more about system here-
https://brainly.com/question/27162243
#SPJ4
a dislocation formed by adding an extra half-plane of atoms to a crystal is referred to as a (an)
A dislocation formed by adding an extra half-plane of atoms to a crystal is referred to as a Shockley partial dislocation.
Understanding Shockley Partial DislocationsA Shockley partial dislocation is a type of dislocation that occurs when an extra half-plane of atoms is added to a crystal. It is a misfit dislocation, meaning that the extra plane does not fit into the lattice of the crystal.
This can cause strain and stress to build up in the crystal, leading to defects and other issues in the crystal structure. The Shockley partial dislocation can cause the atoms in the crystal lattice to become misaligned, resulting in a weakened structure. In order to reduce the strain and stress that this type of dislocation causes, the atoms in the extra plane must be removed or replaced with new atoms that fit into the lattice. This can help to restore the crystal to its original, undamaged state.
Learn more about Dislocations: https://brainly.com/question/28811787
#SPJ4
The velocity profile in a turbulent boundary layer often is approximated by the 1/7-power-law equation u/U = (y/delta)1/7 Compare the shape of this profile with the parabolic laminar boundary-layer velocity profile (Problem 9.10) by plotting y/delta (on the ordinate) versus u/U (on the abscissa) for both profiles.
The 1/7-power-law velocity profile is a better representation of the velocity profile in a turbulent boundary layer than the parabolic laminar boundary-layer velocity profile.
What is velocity?
Velocity is the rate at which an object moves in a certain direction. It is a vector quantity, meaning it has both magnitude (the speed) and direction. Velocity is often expressed as the rate of change of displacement, which is the distance an object travels in a certain direction. Velocity is the change in position over time; the faster an object moves, the greater the velocity. Velocity is important in physics because it is used to calculate the acceleration of an object, the force of gravity, and the momentum of a moving object. It is also used to measure the speed of sound and the speed of light. Velocity is a fundamental concept in physics, and it is used to describe and measure a variety of physical phenomena.
This is because the former has a higher velocity near the wall and a lower velocity near the centerline, which is more representative of the actual velocity profile in a turbulent boundary layer.
The 1/7-power-law velocity profile is represented by the equation u/U = (y/delta)1/7 and the parabolic laminar boundary-layer velocity profile is represented by the equation u/U = (y/delta)2.
When these two equations are plotted on the same graph, with y/delta on the ordinate and u/U on the abscissa, the 1/7-power-law velocity profile is seen to have a higher velocity near the wall and a lower velocity near the centerline, which is more representative of the actual velocity profile in a turbulent boundary layer.
To learn more about velocity
https://brainly.com/question/21729272
#SPJ4
Calculating impedance. Impedance is a useful concept in many engineering disciplines, especially for analyzing electrical circuits when the applied voltages or currents are sinusoids. Impedance is a complex number that represents the ability of a circuit element or combination of elements to oppose sinusoidal electric current impedance has the same units as resistance, or ohms Ω The impedance of vanous circuit elements can be calculated as follows: Inductor's impedance nductor- jo, where is the imaginary unit, is the sinusoid's frequency, and L is the inductance. joc, where is the imaginary unit, is the sinusoid's frequency, and C is the capacitance dance: ein -R, where R is the resistance Two impedances, 4 and 2z, can be combined in many different ways. The simpliest combintations are in series or in parallel. z,in-2+ 2a 7る . Two impedances in senes . Two impedances in parallel: The U.S. electrical grid operates at a frequency of 60 Hz, or 377 rad's, Complete the function CalculateCombinedimpedance such that 1. Assign motorimpeda ance with the impedance given an electrical motor connected to U.S electrical grid with resistance motorResistance and inductance motorinductance in series 2. Assign capacitorimpedance with the impedance given a capacitor connected to the US electrical grid with capacitance capacitorCapacitance 3. Assign combinedimpedance with the impedance of the parallel combination of the above motor and the capacitor
Impedance is an AC property of a circuit that may change depending on the frequency of operation. Typically, it is expressed as Z = R - j/C + jL, where = 2f.
Impedance is a helpful concept in a variety of engineering fields, particularly for studying electrical circuits with sinusoidal applied voltages or currents. Impedance (Z), which is written as a complex number, i.e. Z = R + jX, communicates a component's resistance to both direct current and alternating current. An ideal resistor has an impedance equal to its resistance, where the imaginary component is 0 and the real component is the resistance.
Any form of resistance adds up in series: ZTotal = Z1, Z2, Z3, etc. Although impedances are added in series, because inductive and capacitive impedances in series tend to cancel one another out, the total impedance for a circuit with inductance and capacitance may be smaller than one or more of the individual impedances.
Know more about impedances here:
https://brainly.com/question/2263607
#SPJ4
What 3 services provided by Azure and AWS seem the most interesting to you? Briefly summarize why you selected these services
In addition, Azure offers four different forms of cloud computing: infrastructure as a service (IaaS), platform as a service (PaaS), software as a service (SaaS) and serverless functions.
Serverless functions, platform as a service, software as a service, and infrastructure as a service are among the four different types of cloud computing that Azure offers. To manage both structured and unstructured data, AWS and Azure both provide a variety of database options. Both AWS and Azure provide Amazon RDS as a database choice. The Amazon Virtual Private Cloud makes it possible to create private networks within the Cloud (VPC). AWS (Amazon Web Services), Amazon's cloud computing infrastructure, is enormous and ever-growing. It mixes packaged software-as-a-service (SaaS), infrastructure-as-a-service (IaaS), and platform-as-a-service (PaaS) offerings.
To learn more about Azure click the link below:
brainly.com/question/13144160
#SPJ4
if the dryer operates adiabatically, state what you can conclude about the temperature of the entering air. explain you answer.
Solids that are still wet are dried continuously. The water that evaporates from the solids is picked up by the hot, dry air that enters the dryer at a rate of 400 kg/min.
What is meant by temperature?It is customary to measure air temperature in either degrees Celsius (°C) or degrees Fahrenheit (°F), which refers to the temperature of the air surrounding a person.Despite the fact that temperatures are increasing, it is crucial to remember that temperatures are rising on average. Simply put, climate change raises the likelihood that a particular season or year will be warmer than average. Even while they will happen less frequently, colder-than-average temperatures are still possible in a world where the climate is changing.Make use of the psychrometric chart to determine the wet-bulb temperature, relative humidity, dew point, and specific enthalpy of the air leaving the dryer.Make use of the psychrometric chart to determine the specific enthalpy and absolute humidity of the air leaving the condenser.To learn more about temperature refer:
https://brainly.com/question/18042390
#SPJ4
T/F it is possible to create a while loop that determines when the end of a file has been reached.
Answer:
True
Explanation:
water flows at a rate of 0.9 m3/s in a 2.5 m wide channel as shown. at a particular section, the flow depth is 1.2 m. a. what would be the flow depth over a bump of height 0.1 m installed just downstream of this section? b. what is the maximum elevation of the bump that could be installed without backing/ choking the flow (hint: look for ec in y-e diagram)
The depths immediately upstream and downstream of the lowered segment, or normal depth, are those in the approach flow.
The amount of water that might theoretically flow out of your kitchen faucet or bathtub each minute is measured by your water flow rate, sometimes referred to as your gallons per minute (GPM).
Assuming your flow rate is currently standard, your home will never need to exceed that final GPM unless you intend to build more kitchens, bathrooms, or laundry rooms. The typical residential water flow rate for small homes is between 6 and 12 gallons per minute.
Add the average breadth (in m), the average depth (in m), and the average water velocity (in m/s) together to get the water flow (in m3) (in m). Water flow equals 0.255 m3/s (0.425 m/s x 1 m x 0.6 m).
Know more about standard here:
https://brainly.com/question/14310029
#SPJ4
the motor in a refrigerator has a power of 200 w. if the freezing compartment is at 270 k and the outside air is at 300 k, and assuming the efficiency of a carnot refrigerator, what is the maximum amount of energy that can be extracted as heat from the freezing compartment in 10.0 min?
The maximum amount of energy that can be extracted as heat from the freezing compartment in 10.0 min is 1.08×10^6J.
Define energy engineering.
Engineering or Systems for Energy Energy efficiency, energy services, facility management, plant engineering, environmental compliance, sustainable energy, and renewable energy technologies all fall under the broad umbrella of engineering. To work as an energy engineer, one must possess a bachelor's degree in engineering.
A bachelor's degree is a terrific place to start, but certain jobs could want further training or qualifications. For students to develop their skills and knowledge further, additional training or internships are advised. For reducing energy use and consumption, these engineers create solutions. Green solutions are implemented, reducing costs and environmental effects through study, design, documentation, and implementation.
Solution Explained:
Work done by the motor in time (t)=10.0min
∣W∣=Pt=(200W)(10.0min)(60s/min)
∣W∣=1.20×10^5J
Heat extracted is then is
[tex]|Q_{L}| = K |W| = \frac{T_L |W|}{T_H - T_L} = \frac{(270K) (1.20 X 10^5)}{300K - 270K} = 1.08 X 10^6J[/tex]
To learn more about energy engineering, use the link given
https://brainly.com/question/19770086
#SPJ4
assign isteenager with true if kidage is 13 to 19 inclusive. otherwise, assign isteenager with false. java
This is the requierd code in Java that assigns true to the variable 'isTeenager' in case the variable 'kidAge' has the value of age between 13 and 19 inclusive; Otherwise 'isTeenager' is assigned with false.
import java.util.Scanner;
public class TeenagerDetector
{
'public statc v0id main (String [] args)'
{
Scanner scnr = new Scanner(System.in);
boolean isTeenager;
int kidAge;
kidAge = scnr.nextInt();
if(kidAge >= 13 && kidAge <= 19)
{
isTeenager = true;
}
else
{
isTeenager = false;
}
if (isTeenager)
{
Sysem.out.println("Teen");
}
else
{
System.out.println("Not teen");
}
}
}
You can learn more about Java Program at
https://brainly.com/question/26642771
#SPJ4
Part A uniform line of charge with length 20.0 cm is along the x-axis, with its midpoint at x = 0. Its charge per length is +6.30 nC/m. A small sphere with charge -2.00 uC is located at x = 0, y = 5.00 cm. What is the magnitude of the force that the charged sphere exerts on the line of charge? Express your answer with the appropriate units. = uÅ ? F = 1.8. 10-3 IN Z Submit Previous Answers Request Answer
The charged sphere pushes against the line of charge with a force of 0.0181 N.
What is force between the charges' magnitude?The product of the magnitudes of the charges and the square of the distance between them determines the magnitude of the electrostatic force F between two point charges, q1 and q2, and vice versa. While opposing charges attract one another, like charges repel one another.
Apply the electrostatic force law of Coulomb.
F = (kq1q2)/r²
where;
Charge is q1. 1.26 nC = 6.3 n C/m x 0.2 m
F = (9 x 109 x 1.26 x 109 x 4 x 106)/q2
= charge 2 = -4 C
r = distance between the charges = 5 cm
= 0.05 m (0.05)²
F = 0.0181 N
To learn more about magnitudes refer to:
https://brainly.com/question/24468862
#SPJ4
. before taking a bite of a piece of hot pizza you blow on it to cool it what mode of heat transfer are you using in this situation group of answer choices radiation convection specialized transfer conduction
Assuming before taking a bite of a piece of hot pizza, you blow on it to cool it, the mode of heat transfer that you are using in this situation is: B. convection.
What are the types of heat energy transmission?In Science, there are three (3) main types of heat energy transmission (transfer) and these include the following:
ConductionConvectionRadiationWhat is convection?In Science, convection can be defined as a heat energy transmission (transfer) process which typically involves the transfer of heat, as a result of the movement of mass such as blowing air on a hot pizza in order to make it cool.
Read more on heat here: brainly.com/question/12072129
#SPJ1
write a for loop to print all num vals elements of array hourlytemp. separate elements with a comma and space. ex: if hourlytemp
For loop to print all num vals elements of array hourlytemp. separate elements with a comma and space is
for(i = 0; i < Num_Vals; ++i){
if(i < Num_Vals -1){
cout<<hourlytemp[i]<<",";
}
else{
cout<<hourlytemp[i];
}
}
What are elements?
An element is a discrete component of a bigger group. For instance, in computer programming, an array may include various elements (indexed), each of which may be saved and used independently.
A web browser is instructed by an HT-ML element on how to structure and interpret a certain section of the HT-ML text. Formatting guidelines, content, and semantic meaning can all be found in HT-ML components.
To learn more about elements, use the link given
https://brainly.com/question/28813109
#SPJ4
a datagram of 5,000 bytes (20 bytes of ip header plus 4,980 bytes of ip payload) arrives at a router, and must be forwarded to a link with an mtu (maximum transmission unit) of 1,500 bytes.
The router will then forward all four fragments to the link with an MTU of 1500 bytes.
What is router?
Among computer networks, a router is a network device that forwards information packets. Between networks and across the global Internet, routers handle traffic directing. Data sent over a network, like an email or a web page, is sent in the form of data packets. In order to reach its destination node, a packet has been typically forwarded through one router to some other router thru the networks that make up an internetwork (such as the Internet). A number of data cables from separate Ip networks are connected to a router. The router gets to read the network address details from the packet header when a data packet arrives on one of the lines to ascertain the final destination.
The router must fragment the datagram into four fragments of 1500 bytes each. The IP header will be split across all four fragments, so each fragment will have an IP header of 20 bytes and a payload of 1480 bytes. The first fragment will have the More Fragments bit set to 1, and the other three fragments will have it set to 0 to indicate that they are the last fragments. The router will then forward all four fragments to the link with an MTU of 1500 bytes.
To learn more about router
https://brainly.com/question/18213472
#SPJ4
the switching valves on the air pump have failed several times. technician a says that a defective exhaust check valve could be the cause. technician b says that a leaking exhaust system at the muffler could be the cause. which technician is correct?
Correct, the technician a claims that a broken exhaust check valve may be to blame.
Which of the following air system valves has a purpose to stop exhaust gases from entering the air pump?makes sure that hot exhaust gases don't back up into the hoses and the pump. Air is distributed to each cylinder by an air manifold. Air Nozzles - Placed next to the exhaust valves, they inject air into each exhaust route. The diverter valve is activated by the manifold vacuum signal line, which detects manifold vacuum.
The PCV valve and SAI system regulate what exhaust emissions?The fumes from the crankcase are controlled back into the intake system by positive crankcase ventilation (PCV) systems using a valve or fixed aperture. Depending on engine vacuum, a PCV valve controls how much fumes are released.
To know more about air pump visit :-
https://brainly.com/question/15613874
#SPJ1
Behavioral scientists have created models that identify how managers work today. Based on their observations, researchers offer a set of five management attributes. Which of the following conditions apply to management at the present time? More than one answer may be correct. Check All That Apply fast-paced work fragmented activities currency of information low technology knowledge
The statement claims that fragmented hobbies and fast-paced labor are the best choices.
What's a short way to define technology?Technology, or as it is sometimes referred to, the modification and manipulation of both the human environment, is the implementation of scientific understanding to the practical goals of human existence.
Briefing:"A fast-paced company is a place where things move quickly and remain active throughout the day. Throughout the workweek, there are almost never great prospects for relaxing moments, and employees frequently switch between tasks without a moment's notice ".
With reference to the usage of ICT, the concept of discontinuity corresponds to how workouts are spatially and temporally arranged by dividing exercises into some more manageable sections that are afterwards completed at various times and locations.
To know more about Technology visit:
https://brainly.com/question/26254893
#SPJ1
consider the following table exam results: which sql statement sdo we use to find out how many students took each exam g
The following table exam results:
SELECT Exam, COUNT(*)
FROM ExamResults
GROUP BY Exam;
What is table?
Table is a data structure in computer science that organizes data in rows and columns. It is used to store and manipulate data in a structured format. Tables can be used to store and organize text, numbers, images, and other data. Tables can be used to store and organize data for various purposes such as data analysis, data visualization, and data retrieval. Tables are used in relational databases to store and manage data, as well as in spreadsheets to create graphs and charts. Tables are an essential component of data processing in a computer system and are used in many areas of computing including web development, data science, and software engineering. Tables provide a way to organize and display data in an organized and efficient manner. Tables are used in many applications including web browsers, databases, spreadsheets, and other data processing applications.
To learn more about table
https://brainly.com/question/20596286
#SPJ4
In IPv4, datagram fragment might be fragmented again at the next router. Re-assembly of these sub-fragments is handled by:
A. the first router that has an MTU big enough to handle the re-assembled fragment
B. every router visited on the path through the internet core
C. the last router before the destination host
D. the destination host
E. none of these
In IPv4, a fragmented datagram could be fragmented once more at the following router. Re-assembly of these semi is handled by destination host.
Describe the router.
Among computer systems, a gateway is a network device that forwards data packets. Across networks and on the worldwide Internet, router handle traffic steering. Data delivered via a network, like an email or a website link, is transmitted in the form of packets of information. In way to attain its destination node, a packet is typically passed through one router to some other routers over the networks that make up an online connection (such as the Internet).
To know more about Router
https://brainly.com/question/29768017
#SPJ4
the imaging analytics engine developed by zebra-med can be used to uncover which of the following conditions that may be present in ct scans?
Lung conditions, Brain conditions, Liver disease. Zebra-imaging Med's analytics engine can be used to identify conditions that may be present in CT scans for the liver, the brain, or the lungs.
A computed tomography scan, often known as a CAT scan or computed axial tomography scan, is a medical imaging procedure that produces precise inside images of the body. The individuals who perform CT scans are known as radiologists or radiography technologists. To measure the attenuations of X-rays by various tissues inside the body, CT scanners use a revolving X-ray tube and a row of detectors arranged in a gantry. Tomographic reconstruction procedures are then used to process the many X-ray data acquired from various angles on a computer to create tomographic (cross-sectional) images (virtual "slices") of a body. Patients who need a CT scan but cannot undergo an MRI do so because they have metallic implants or pacemakers.
Learn more about CT scans here
https://brainly.com/question/28632997
#SPJ4
You are the network administrator for a consulting firm. A website that users on your network visit has a habit of frequently changing its IP address. When these IP mappings change, users are unable to connect until you clear the DNS cache. a Which of the following settings should you configure so that the cache does not need to be manually cleared every time? Forward lookup zone Time to live Reverse lookup zone CNAME record
Where you are the network administrator for a consulting firm, and a website that users on your network visit has a habit of frequently changing its IP address. If when these IP mappings change, users are unable to connect until you clear the DNS cache, the settings that you ought to configure so that the cache does not need to be manually cleared every time is: Time to live (Option B)
What is a DNS Cache and why is it important?DNS cache is the temporary caching of information from earlier DNS lookups on a machine's operating system or web browser.
Keeping a local copy of a DNS query helps your operating system or browser to obtain it fast, allowing a website's URL to be resolved to its matching IP address much more effectively.
Learn more about DNS Cache:
https://brainly.com/question/29649483
#SPJ1
a six-way power seat is not operating in any switch position. technician a says to check the circuit breaker. technician b says there may be excessive resistance in the electrical circuit. who is correct?
Both A and B correct .Three categories of circuit breakers exist:Type 3 circuit breakers are manually resettable and need to be reset by pushing a button or lever.
How is a circuit breaker repaired? Three categories of circuit breakers exist:Type 3 circuit breakers are manually resettable and need to be reset by pushing a button or lever.High resistance connections are frequently the result of poor craftsmanship, the most frequent of which is a failure to tighten connections.Another frequent problem is the inability to line up several wires when they are connected with a twist-on connector, like a wire nut.Voltage measurement is the most accurate approach to identify undesirable resistance faults:Source voltage is the voltage that was recorded at the circuit's start.The voltage that is accessible to the load is known as the available voltage.The voltage that the load uses is known as the load voltage drop.To learn more about circuit breaker refer
https://brainly.com/question/14971898
#SPJ1
The CPMT conducts the BIA in three stages. Which of the following is NOT one of those stages?
a. Determine mission/business processes and recovery criticality
b. Identify recovery priorities for system resources
c. Identify resource requirements
d. All of these are BIA stages
Where the CPMT conducts the BIA in three stages, note that " All of these are BIA stages" (Option D)
What is CPMT?Note that CPMT means - Contingency Planning Management Team while BIA means Business Impact Analysis.
It should be noted that the Contingency Planning Management Team (CPMT) creates and maintains plans for responding to and recovering from crises or disruptions to an organization's operations. Business Impact Analysis (BIA) assesses the possible repercussions of important business operations interruptions and assists in prioritizing the development of contingency plans and allocating resources.
Learn more about BIA:
https://brainly.com/question/30027441
#SPJ1
the enormous gains in crop yields brought about by green revolution technologies may soon stop. hypothesize why.
a. true
b. false
The statement "the enormous gains in crop yields brought about by green revolution technologies may soon stop" is definitely true.
What is the Green revolution?The green revolution may be defined as a type of revolution in which there would be a great increase in the production of food grains (such as rice and wheat) due to the introduction of high-yielding varieties, the use of pesticides, and better management techniques.
It started around the 1960s and helped in increasing food production in the country. The green revolution's primary aim was to introduce high-yielding varieties (HYVs) of cereals to alleviate poverty and malnutrition. They soon stop because they are not much efficient as pear present needs and conditions.
Therefore, the statement "the enormous gains in crop yields brought about by green revolution technologies may soon stop" is definitely true.
To learn more about the Green revolution, refer to the link:
https://brainly.com/question/1082058
#SPJ1
pick the phrase that best describes sdn question 1 options: sdn is an architecture that separates the network control and forwarding functions. sdn is a protocol that enables communications between network devices. sdn is an application that can be used to manage networks.
SDN is described as an architecture that separates the network control and forwarding functions.
A developing architecture called Software-Defined Networking (SDN) is dynamic, manageable, affordable, and adaptive, making it perfect for the high-bandwidth, dynamic nature of today's applications. This approach separates the network control and forwarding processes, allowing for direct network control programming and the abstraction of the underlying infrastructure for applications and network services.
SDN offers a variety of commercial advantages. The control and data transport layers being divided shortens the time it takes to launch new applications while increasing flexibility. Network availability is increased by having the ability to react more quickly to problems and outages. The ability to program makes it simpler for IT companies to automate network operations and cut costs.
To learn more about SDN click here:
brainly.com/question/28992430
#SPJ4
True or False, if two electrons in an atom have the same energy, then they must have the same four quantum numbers.
False "The set of all four quantum numbers cannot be the same for any two electrons in an atom." There must be at least one distinct quantum number, or spin quantum number, between any two electrons present in an atom's orbital.
Can two electrons share the same energy in an atom?Two electrons can, of course, be at the same energy level. Only that two fermions cannot occupy the same state is stated by Pauli's principle.
What Makes two atoms identical?The number of protons or electrons in an atom and its mass number, which is the number of neutrons, are the same for all the atoms of the same element. Different isotopes of an element are created as a result of this fluctuation or alteration in the number of neutrons in an atom.
To know more about quantum numbers visit :-
https://brainly.com/question/16977590
#SPJ4
technician a says ac circuits are used in virtually all chassis circuits because a battery can easily store and supply ac current. technician b says dc current is used to power hybrid drive electric motors. who is correct?
Technician B is correct. DC current is used to power hybrid drive electric motors.
The Importance of DC Current in Hybrid Drive Electric MotorsThe modern world is becoming increasingly reliant on electric motors to power a range of different machines and vehicles. Hybrid drive electric motors are a key component of this technology, as they combine the power of an internal combustion engine with the efficiency of an electric motor. These motors are powered by direct current (DC) instead of the alternating current (AC) used in most chassis circuits. In this essay, we will discuss the importance of DC current in hybrid drive electric motors, why it is preferred over AC current, and the advantages that DC current provides in these motors.
The primary reason why DC current is used in hybrid drive electric motors is because it is more efficient than AC current. DC current is able to provide a constant level of power, whereas AC current can fluctuate depending on the voltage. This constant level of power is important for hybrid drive electric motors, as it ensures that the motor can consistently produce the power necessary for its intended application. Furthermore, DC current is able to transfer power more efficiently than AC current, meaning that the motor can use less energy to produce the same amount of power.
Learn more about drive electric motors :
https://brainly.com/question/14201010
#SPJ4
The mass of the uniform slender rod is 3 kg. Determine the position x for the 1.2-kg slider such that the period is 1 s. Assume small oscillations about the horizontal equilibrium position shown.
It gives us a value of approximately 2.87 meters. This is the position of the 1.2-kg slider that results in a period of 1 s.
To determine the position of the 1.2-kg slider that results in a period of 1 s, we need to first understand the physics of the situation. A uniform slender rod is a type of simple harmonic oscillator, which means that it will oscillate back and forth around its equilibrium position with a certain period. The period of a simple harmonic oscillator is determined by its mass and the stiffness of the force that is restoring it to its equilibrium position. In the case of a uniform slender rod, the restoring force is provided by the rod's own weight.
The period of a simple harmonic oscillator is given by the formula:
[tex]T = 2 * \pi * \sqrt{\frac{m}{k} }[/tex]
Where T is the period, m is the mass of the object, and k is the stiffness of the force that is restoring it to its equilibrium position. In the case of a uniform slender rod, the mass is 3 kg and the stiffness is the force of gravity, which is 9.8 Newtons/kg.
Plugging these values into the formula above, we get:
[tex]T = 2 * \pi * \sqrt{\frac{3}{9.8} }[/tex]
This simplifies to:
[tex]T = 2 * \pi * \sqrt{(0.306)}[/tex]
Which gives us a period of approximately 0.9 seconds.
To determine the position of the 1.2-kg slider that results in a period of 1 s, we need to solve the equation:
[tex]T = 2 * \pi * \sqrt{\frac{m}{k} } = 1 s[/tex]
for the position x. Since we know the mass of the slider and the stiffness of the restoring force, we can simply plug in these values and solve for x.
The mass of the slider is 1.2 kg, and the stiffness of the restoring force is 9.8 N/kg, so we have:
[tex]1 s = 2 * \pi * \sqrt{\frac{1.2}{9.8} }[/tex]
Solving for x, we get:
[tex]x = \sqrt{\frac{9.8}{1.2} }[/tex]
This simplifies to:
x = [tex]\sqrt{8.17}[/tex]
x = 2.87 meters.
Learn more about oscillations, here https://brainly.com/question/28994371
#SPJ4