The ionization energy grows from left to right during the course of a period and drops from top to bottom in groups. As a result, helium has the highest initial ionization energy whereas francium has one of the lowest.
Why is ionization necessary?We utilize ionizing radiation on a daily basis to keep ourselves healthy. Smoke detectors emit ionizing radiation, which is also employed in many other aspects of daily life, including the sterilization of blood and medical equipment. It is a byproduct of the nuclear power industry as well.
What kind of energy is ionization?The amount of energy required for an isolated, gaseous atom to discharge one electron, creating a cation, is known as the ionization energy. Typically, kJ/mol is used to express this energy.
To know more about Ionization visit:
https://brainly.com/question/28385102
#SPJ4
. when the colors yellow and blue are combined, they produce a green color. which statement most likely describes the relative sizes of the yellow and blue food-coloring molecules in the diagram?
from the list below, select four situations in which casting is the preferred fabrication technique. (1) for alloys having low ductilities (2) when it is the most economical fabrication technique (3) when it is needed to join a large variety of metals and alloys (4) for large pieces and/or complicated shapes (5) for economical producing of parts that require very close dimensional tolerances (e.g. bushing and gears) (6) when mechanical strength is not an important consideration (2), (3), (5), (6) (1), (2), (4), (6) (2), (3), (4), (6) (1), (2), (4), (5) (1), (3), (4), (5)
Mechanical strength isn't a key factor when a wide range of metals and alloys need to be joined.
What are the three primary fabrication methods?While many metal fabrication businesses employ a variety of methods, the majority rely on the three fundamental operations of cutting, bending, and assembly.
What is a fabrication, exactly?The following are some illustrations of fabrication or falsification: producing data artificially when it ought to be coming from a real experiment Unauthorized tampering with or fabrication of information, texts, pictures, audio, video, music, or other works.
To know more about fabrication techniques visit:
https://brainly.com/question/14375464
#SPJ4
the rf of a compound on a tlc plate will likely increase as you increase the polarity of the developing solvent.
The Rf value of a compound is generally equal to the distance that is traveled by the compound divided by the distance traveled by the solvent front.
Thin layer chromatography (TLC) is a widely used separation technique for the quantitative and qualitative analysis. It uses a thin layer of a stationary phase that is coated on a glass, plastic, or also on aluminum plate. A liquid solvent that is called the mobile phase generally carries the sample and separates it as it moves across the plate. It offers the advantages of simplicity, sensitivity, and rapid analysis over other separation techniques.
The stronger a compound is bound to the adsorbent , the slower it moves on the TLC plate. Non-polar compounds move up the plate most rapidly because of the higher Rf value, whereas polar substances will travel up the TLC plate slowly or not at all due to the lower Rf value.
The Rf value is a ratio, and it represents the relative distance between the spot traveled compared to the distance it could have traveled if it was moved with the solvent front. An Rf of 0.55 means the spot moved 55% as far as the solvent front, or a little more than halfway.
To know more about Rf value
https://brainly.com/question/17132198
#SPJ4
During the molecular modeling lab, you were told to consider the importance that molecular geometry has on polarity. Which of the following list of molecules would you classify as polar? [Hint: It may be helpful to sketch the structures to determine polarity.] I. PF5 II. SF4 III. SiO2 IV. H2S V. CI2 O II + IV O I + III O III + IV O IV + IO III
Molecules (II) and (IV) that is SF4 and H2S are polar.
In polar molecules, the electron density is unevenly distributed throughout the molecule, resulting in some regions of negative charge and some regions of positive charge. Molecular polarity depends on both individual bond polarities and molecular geometry, the latter of which can be predicted using his VSEPR theory.
Reason :
In molecule (I), molecule is symmetrical all polar bond cancel out polarity of each other so molecule is non-polar.
In molecule (II), molecule is asymmetrical, having a lone pair so molecule is polar.
In molecule (III), molecule is linear, bond polarity cancel out each other, so molecule is non-polar.
In molecule (IV), molecule is bent (asymmetric) having two lone pair, molecule is polar.
In molecule (V), no bond polarity, hence molecule is non-polar.
Learn more about Polar molecules here :-
https://brainly.com/question/1433127
#SPJ4
The figure below shows the rotation curves of several spiral galaxies, extending to the very edge of their visible disks. What do these curves tell us about the distribution of dark matter in these galaxies?
Group of answer choices
Most of the dark matter is in the bulge.
Most of the dark matter is in the galaxies’ outskirts.
Most of the dark matter is near stars.
Most of the dark matter is in clumps.
The thing that the curves tell us about the distribution of dark matter in these galaxies is option B: Most of the dark matter is in the galaxies’ outskirts.
Why do galaxy rotation curves suggest the existence of dark matter?Beyond the visible borders of galaxies, the velocity of stars remains relatively constant, suggesting that there must be more matter present than what we can see as stars and gas.
When the impact of DE became noticeable, the rotation curves are shown to dip at a specific distance. r. These flat, v = constant, rotation curve data suggest that the amount of dark matter is increasing linearly with r up to great distances from the spiral galaxies' centers.
From the graph you can see they all pointing or going one direction, hence we can deduce that it is option B.
Learn more about dark matter from
https://brainly.com/question/28256017
#SPJ1
Question 4
How many moles of CuSO4 are there in 7.87 x 1024 molecules of CuSO4?
Answer:
8058.88
Explanation:
7.87 x 1024 = 8058.88
duh
25
Mutations are changes in the DNA of an organism. Changes caused by mutations can affect the structure and function of different proteins in the body. Three changes caused by mutations are described below:
Having two different-colored eyes is caused by a mutation that results in increased or decreased pigmentation in one of the eyes. While this mutation affects the coloration of the eye, it does not affect how the eye functions.
Cystic fibrosis is caused by the mutation of a protein in the lungs that causes a sticky mucus to build up in the lung tissue. This build up of mucus can make it difficult for a person to breathe.
Bone density can be affected by a mutation. This mutation can cause very dense bones that are almost unbreakable.
What is true about mutations in organism?
A.
Changes caused by mutations never have an effect on an organism's cells.
B.
Changes caused by mutations can be harmful, beneficial, or neutral to an organism.
C.
Changes caused by mutations always have positive effects on an organism.
D.
Changes caused by mutations always have negative effects on an organism.
Bone density can be affected by a mutation. This mutation can cause very dense bones that are almost unbreakable therefore the true statement about mutations in organism is that changes caused by mutations can be harmful, beneficial, or neutral to an organism which is therefore denoted as option B.
What is Mutation?This is referred to as a change in the DNA sequence of an organism and it occurs when there are errors during cell division.
The changes caused have different effects on the organisms which could be harmful, beneficial, or neutral.
Read more about Mutation here https://brainly.com/question/23030726
#SPJ1
Post-Lab Questions Discuss the outcome of Ihe E1 and E2 reactions for (he following: Which alkene was formed as Ihe major product? Explain thoroughly for full credit; Which alkene was formed as the minor product? Explain thoroughly for full credit;
Both E1 reaction and E2 reaction are more likely to produce 2-methyl-2-butene, instead of 2-methyl-1-butene.Therefore, it makes sense that "2-methyl-2-butene" is the major product while "2-methyl-1-butene" is the minor product because it is not as stable or substituted.
This has happened due of Zaitsev's Rule. Compared to 2-methyl-1-butene, 2-methyl-2-butene's double bond is more heavily replaced. Because it is more stable, 2-methyl-2-butene is more prevalent in the yield. The hydrogen needed to create 2-methyl-2-butene comes from the beta carbon that has undergone the most substitutions. According to Zaitsev's rule, the main product is the one produced as a result of hydrogen being lost during beta distillation, errors being made when weighing and measuring reagents and products, gathering the distillate above 45 C, and alkene products being lost because the alkenes were too close to a heat source. Future investigations should aim to reduce these flaws to obtain more precise results.
learn more about 2-methyl-2-butene here:
https://brainly.com/question/12484834
#SPJ4
propose a chemical test that could be used to distinguish the presence of alkene in your product (hint: think about exp 08).
Alkane and alkene distinctions can be made using a straightforward test using bromine water. This enables us to differentiate between alkenes and alkanes using a straightforward chemical test.
The orange solution of bromine is called bromine water. Alkanes and alkenes can be distinguished using bromine water, an orange solution. Alkenes are typically checked for using bromine water. If you shake the test tube after adding an alkene to a sample of bromine water. Similar to how alkene passes through bromine water, bromine's yellow color is removed by colorless solution. A qualitative test for the presence of phenols, anilines, and unsaturated carbon is the bromine decolorization test.
to know more about Alkane please visit.
https://brainly.com/question/27039762
#SPJ4
using xuv series what can you deduct about relationship between iodized energy and reactivity of metals
Using xuv series, deduct about relationship between iodized energy and reactivity of metals that, The first ionization energy of a metal has little bearing on its reactivity.
Ionization energy, sometimes referred to as ionization potential, is the amount of energy needed to remove an electron from an isolated atom or molecule in physics and chemistry. Ionization energies are related with the removal of each subsequent electron, however they are most frequently employed when the first (and loosely held) electron is removed. In an electric discharge tube, when a quickly moving electron produced by an electric current collides with a gaseous atom of the element, causing it to eject one of its electrons, the ionization energy of a chemical element, given in joules or electron volts, is often measured. A hydrogen atom, which consists of an orbiting electron connected to a nucleus of one proton, requires one ionization energy of 1018 joules (13.6 electron volts) to completely expel an electron. The amount of an element's ionization energy depends on a number of factors, including the size of the atom, its electronic make-up, and the electric charge of its nucleus. Alkali metals are the simplest chemical elements to remove an electron from, whereas noble gases are the most difficult.
To know more about ionization energy please refer: https://brainly.com/question/29629534
#SPJ4
Oxalic acid (HC2H2O4HC2H2O4) is a weak acid found in the leaves of rhubarb. Which of the following solutions will have the highest pH?
a) 0.00075 M H2C2O40.00075 M H2C2O4
b) 1.0×10−4 M1.0×10−4 M H2C2O4H2C2O4
c) 1.0 M H2C2O41.0 M H2C2O4
d) 0.5 M H2C2O4
b) 1.0×10−4 M1.0×10−4 M H2C2O4H2C2O4 will have the Highest pH among the solutions.
When compared to strong acid, does oxalic acid produce less H ions?A weak acid is what oxalic acid is. It is not as strong as H3O+ ion (water). However, it is more potent than acids like acetic, sulfuric, nitrous, and benzoic. First of all, it is an organic substance, and organic substances are often not strong acids. Dicarboxylic acid is another name for oxalic acid.
How can you determine the pH of an amalgamation of weak bases and weak acids?Similar to how the weak acid in the example was calculated, a weak base's solution can also be calculated to determine its pH. However, the concentration of the hydroxide ion will be represented by the variable x.
Learn more about pH here:
brainly.com/question/15289741
#SPJ4
look at the given synthesis and the provided reagents. fill in the blanks with the single letter code of the appropriate reagent, or the appropriate descriptive vocabulary word/phrase to complete the description. remember the computer is very literal so check your spelling carefully.
The reagent are used in the chemical reaction to cause the chemical reaction or the test performed if one occurred.
The reagents are the compounds or the mixture that are added to the chemical reaction in order to start the chemical reaction. The reagent is not necessarily be consumed during the chemical reaction. the reagent is used to identify the compound or to measure the substance if it is present in the reaction.
The reagent is the initiator , solvent , catalyst etc. the example of the reagents are : Tollen's reagent , Fehling's reagent , Fenton's reagent and collins reagent etc.
The question is incomplete, I answer the question in general according to my knowledge.
To learn more about reagent here
https://brainly.com/question/14785610
#SPJ4
which of the following nuclides are most likely to decay via positron emission? na-26 i-121 ca-42 s-30 sb-122
The following nuclides are most likely to decay via positron emission is S - 30 because it has lowest value of the N/Z value.
The one which have the lowest N / Z value will undergo the positron emission. N is the number of the neutron and Z is the number of the proton.
1) Na - 26 = number of neutron / no. of proton
= 15 / 11
= 1.3
2) I -121 = 68 / 53
= 1.2
3) Ca - 42 = 22 / 20
= 1.1
4) S - 30 = 14 / 16
= 0.8
5) Sb - 122 = 71 / 51
= 1.3
Thus , S - 30 has the lowest N/Z value.
To learn more about positron emission here
https://brainly.com/question/28506056
#SPJ4
The standard emf for the cell using the overall cell reaction below is =2.20 V:
2Al(s) + 3I2(s) ? 2Al3+ (aq) + 6I- (aq)
The emf (voltage) generated by the cell when [Al3+] = 4.0 x 10-3 M and [I-] = 0.015 M
is_______ V
The cell produces an emf of 2.32 V. For this cell reaction at 25 degrees Celsius, use the Nernst equation. where n represents the number of electrons exchanged during the cellular process.
What is the typical EMF this cell produces?According to measurements, the electromotive force (EMF) is 1.100 V. The standard condition is specified as a concentration of 1 M in an ideal solution, and as a result, 1.100 V is the standard electromotive force, DEo, or standard cell potential for the Zn–Cu galvanic cell.
How is the average Ecell determined?Due to the larger standard reduction potential of the silver half-cell, the reduction will occur. The half-cell of tin will oxidize. The formula E0cell=E0red+E0oxid can be used to get the overall cell potential.
To know more about Electromotive Force (EMF) here:
brainly.com/question/14968481
#SPJ4
the half equivalence point is in the middle of the buffer region. in order to reach the half equivalence point in their titration, veronica needed to add 24.47 ml of koh to 50.00 ml of 0.368 m hf. what is the concentration of conjugate base at the half equivalence point? note: do not use scientific notation or units in your response. sig figs will not be graded in this question, enter your response to four decimal places. carmen may add or remove digits from your response, your submission will still be graded correctly if this happens.
The concentration of conjugate base at the half equivalence point should be 0.347 M.
Moles of HF = molarity × volume ( in L )
= 0.342 × 50/1000
= 0.0171 mol
Since, at half equivalence point, exactly half of the acid in the buffer solution has reacted with the titrants.
So, moles of KOH = 0.0171/2 mol
molarity of KOH = moles / volume (in L)
= (0.0171 / 2 mol) / 24.63 L / 1000
= 0.0171 × 1000 / 2 × 24.63
= 0.347 M
Therefore, the concentration of conjugate base at the half equivalence point is 0.347 M.
To learn more about Concentration, here :
https://brainly.com/question/29855974?referrer=searchResults
#SPJ4
What is ΔH∘rxn for the following chemical reaction?
CO(g)+NH3(g)→HCN(g)+H2O(g)
You can use the following table of standard heats of formation (ΔH∘f) to calculate the enthalpy of the given reaction.
Element/ Compound Standard Heat of Formation (kJ/mol) Element/ Compound Standard Heat of Formation (kJ/mol)
H(g) 218 N(g) 473
H2(g) 0 O2(g) 0
NH3(g) −45.90 O(g) 249
CO(g) −110.5 H2O(g) −241.8kJ
C(g) 71 HCN(g) 130.5kJ
C(s) 0 HNO3(aq) −206.6
Express the standard enthalpy of reaction to three significant figures and include the appropriate units.
To calculate the standard enthalpy of reaction (ΔH∘rxn) for the given chemical reaction, we need to use the equation for enthalpy of reaction, which is:
ΔH∘rxn = Σ(ΔH∘f products) - Σ(ΔH∘f reactants)
where ΔH∘f is the standard heat of formation for a given compound, and the summation symbol (Σ) indicates that we need to sum the values for all of the products and reactants in the reaction.
In this case, we are given the standard heats of formation for the products and reactants in the reaction:
CO(g)+NH3(g)→HCN(g)+H2O(g)
We can use these values to calculate the enthalpy of reaction, as follows:
ΔH∘rxn = Σ(ΔH∘f products) - Σ(ΔH∘f reactants)
= (ΔH∘f HCN + ΔH∘f H2O) - (ΔH∘f CO + ΔH∘f NH3)
= (130.5 kJ + −241.8 kJ) - (−110.5 kJ + −45.90 kJ)
= (−111.3 kJ) - (−156.4 kJ)
= 45.1 kJ
Therefore, the standard enthalpy of reaction for the given chemical reaction is 45.1 kJ to three significant figures. This value represents the amount of heat that is absorbed or released when the reactants are converted into products, and it can be used to predict the energetics of the reaction under standard conditions.
in applying this method to other reactions, could the reactant mole ratio for all reactions be found using this method
The reactant mole ratio for all reactions discovered using this method must be met in order to apply this method to other reactions. Furthermore, the reactant molar ratios for each reaction must be known in order to determine the mole ratio in which the principal reactants react.
To adjust the reaction temperature, water was added to reaction mixtures A through E. In this experiment, KCr,O- was chosen as the source of dichromate ions because it is a strong oxidising agent that is easily converted into dichromate ions.The mole ratio is the ratio of the mole amounts of any two compounds in an equitable chemical reaction. The balance chemical equation compares the ratios of the molecules required to complete the reaction. It calculates how much of one substance is required to produce a certain amount of another substance using the mole ratios between the different parts of the reaction.
Learn more about mole ratio here:
https://brainly.com/question/15288923
#SPJ4
a reaction that has a large equilibrium constant has hints a. a faster reaction rate than a reaction with a small equilibrium constantb. more reactants then products at equilibriumc. more products then reactants at equilibriumd. equal amounts of products and reactants at equilibrium.
When the rates of the forward and reverse reactions are identical, equilibrium has occurred. At equilibrium, the concentrations of each reactant and product are both constant.
The relationship between a reaction's products and reactants at equilibrium is expressed by the equilibrium constant, K. A rise in pressure will cause the reaction to move to the right if there are more reactants than products by moles. It is untrue that a reaction with a higher equilibrium constant value proceeds more quickly than one with a lower equilibrium constant value. The equilibrium constant's value has no bearing on the reaction's rate. The rate constant affects the reaction's rate.
to know more about equilibrium please visit.
https://brainly.com/question/28527601
#SPJ4
in calorimetry, whatever happens in the system, the exact same change must occur to the surroundings.
In calorimetry, whatever happens in the system, the exact same change must occur to the surroundings is False.
What occurs in calorimetry?
Heat transfer rates to or from a substance are measured using calorimetry. Heat is transferred to do this using a calibrated item (calorimeter). Calculating the quantity of heat transmitted by the process under study requires using the temperature change recorded by the calorimeter.
The sealed calorimeter has thermometers that track temperature changes as a reaction takes place. This closed system functions similarly to a chemical reactor.
It's crucial to realize that in calorimetry difficulties, the material reacting is the "system," whilst the surroundings are made up of water and calorimetry. The heat exchanged between the "system" and "surroundings" is what is measured.
To know more about calorimetry use link below:
https://brainly.com/question/1407669
#SPJ4
Which of the following compound(s) could be used as starting material(s) make an amide in just 1 step, using reactions we learned in Chapter 21? Select all that apply! O an ester O a carboxylic acid O a nitrile O an anhydride another amide O an acid chloride
The correct answer is carboxylic acid. Option B.
In a similar reaction, a coupling agent such as DCC can be used to prepare amides by the reaction of carboxylic acids with amines. Simple amides can be made by reacting acid anhydrides with amines. Finally, amides can be formed from the direct reaction of carboxylic acids and amines.
Amides are generally prepared by coupling a carboxylic acid with an amine using a coupling agent or by first converting the carboxylic acid to a derivative. Alternative methods include Staudinger ligation, aminocarbonylation of aryl halides, and oxidative amidation of aldehydes. Amides can be hydrolyzed in the presence of aqueous acids.
Learn more about Compound here:- https://brainly.com/question/26487468
#SPJ4
States of Matter
Heating Curve Calculation
144.29 g of pentane vapor at 117 °C is cooled
to completely solid at -84 °C.
Heating Curve Data for Pentane
Boiling Point (°C)
Melting Point (°C)
AHp (kJ/mol)
vap
AHfus (kJ/mol)
Specific Heat, gas (J/mol K)
Specific Heat, liquid (J/mol K)
117
-84
45.3
9.3
120
168
How much heat is released
from the system as the
pentane cools?
A 157 kJ
B. 177 kJ
C. 67600 kJ
D. 67.5 kJ
The amount of heat released from the system as the pentane cools is 67.5kJ.
What is the formula for calculating heat absorbed by pentane?To determine the heat released from the system as the pentane cools, we need to consider the heat absorbed or released during each of the phase changes (vaporization and fusion) as well as the heat absorbed or released during the temperature change of the substance in each phase.
The heat absorbed or released during a phase change can be calculated using the enthalpy of vaporization (AHvap) or enthalpy of fusion (AHfus) and the number of moles of substance undergoing the phase change.
The heat absorbed or released during a temperature change can be calculated using the specific heat of the substance and the number of moles of substance and the temperature change.
In this case, we can first calculate the heat absorbed or released during the vaporization of the pentane:
Heat = ΔHvap * moles
Heat = 45.3 kJ/mol * 144.29 g / (58.12 g/mol) = 102.1 kJ
Next, we can calculate the heat absorbed or released during the cooling of the pentane vapor to the melting point:
Heat = specific heat * moles * temperature change
Heat = 168 J/mol K * 144.29 g / (58.12 g/mol) * (117 - (-84)) K = 68400 J = 68.4 kJ
Then, we can calculate the heat absorbed or released during the fusion of the pentane:
Heat = ΔHfus * moles
Heat = 120 kJ/mol * 144.29 g / (58.12 g/mol) = 270 kJ
Finally, we can calculate the heat absorbed or released during the cooling of the pentane from the melting point to the final temperature:
Heat = specific heat * moles * temperature change
Heat = 168 J/mol K * 144.29 g / (58.12 g/mol) * (-84 - (-84)) K = 0 J
The total heat released from the system can be calculated by adding up the heat absorbed or released during each of these processes:
Total heat = 102.1 kJ + 68.4 kJ + 270 kJ + 0 kJ = 440.5 kJ
The correct answer is therefore D) 67.5 kJ.
Learn more about heat absorbed, here:
https://brainly.com/question/12473602
#SPJ1
What is the mass percentage of C in morphine, C₁7H19NOs? Provide an
answer to two decimal places.
The mass percentage of C in morphine would be 4.21%.
What is mass percentage?The mass percentage of a composition in a compound is the mass of the composition relative to the mass of the entire compound. This can be mathematically expressed as:
Mass percentage = mass of component/mass of substance x 100%
In this case, we are looking for the mass percentage of C in [tex]C_{17}H_{19}NO_3[/tex].
Molar weight of C = 12 g/mol
Molar mass of [tex]C_{17}H_{19}NO_3[/tex] = (12x17) + (1x19) + (14x1) + (16x3)
= 285 g/mol
Mass percentage of C = 12/285
= 4.21% to 2 decimal places.
In other words, the mass percentage of C in morphine is 4.21%.
More on mass percentage can be found here: https://brainly.com/question/16885872
#SPJ1
For each trial, calculate the moles of KHP used to neutralize the NaOH solution and put the answer in the Results Table. (Hint: Use the correct formula from the Discussion section to calculate the molar mass of KHP! It is NOT the mass of K + H + P!)
For each trial, using the mole ratio from the balanced equation, calculate the moles of NaOH and put the answer in the Results Table.
For each trial, calculate the molar concentration of the NaOH solution and put the answer in the Results Table. (See example in the discussion.)
Calculate the average molarity and enter this answer in your Results Table.
Submit your Results Table and Calculations in the following corresponding question boxes.
1.Moles of KHP for Trial 1,2,3,4
2.Moles of NaOH for Trial 1,2,3,4
3.Molarity of NaOH (M) for trial 1,2,3,4
4. Average Molarity of NaOH (M)
1. The number of moles of KHP is found by dividing the mass of KHP by the molecular weight of KHP.
2. The number of moles of NaOH is found by multiplying the moles of KHP by the mole ratio of NaOH to KHP given by the above, balanced chemical reaction.
It will be presumed that more KHP is present in the solution if additional NaOH is added. As a result, the % KHP will be higher than anticipated. If the concentration of NaOH is doubled, just half the volume from the initial experiment is needed. To titrate NaOH with KHP, add NaOH from the burette to a predetermined amount of KHP. The mass and volume of KHP utilized to create the KHP solution are used to calculate the molarity of the KHP solution. The molarity of the NaOH is then determined using the information from the titration.
To learn more about number of moles visit:https://brainly.com/question/14919968
#SPJ4
Nuclides below the valley of stability can become more stable through which of the following processes?
A) beta emission
B) positron emission
C) gamma emission
D) electron capture
E) neutron bombardmentB) positron emission
Nuclides below the valley of stability can become more stable through positron emission.
A positron emission tomography (puppy) test is an imaging check which can assist reveal the metabolic or biochemical feature of your tissues and organs. The puppy test uses a radioactive drug (tracer) to reveal both ordinary and abnormal metabolic pastime.
A positron is the anti-particle of a beta particle, and is emitted with the aid of a proton-rich nucleus. The collision of an electron and a positron yields two 0.511 MeV gamma rays. Positron gamma radiation can penetrate via inches of iron, concrete, timber, plastic, water, and many others.
They're converted into two high-electricity gamma rays moving immediately faraway from every other.
Learn more about positron emission here:- https://brainly.com/question/4598666
#SPJ4
Classify the radicals into the appropriate categories. Primary Secondary Tertiary Allylic Answer Bank (CH3)2CHCH2CH2 HC H3C H3C
The formation of free radicals in the organic reaction takes place when the bond is cleavage homolytically. Free radicals are species with a single electron and thus, they are electron deficient in nature.
A free radical may be primary, secondary or tertiary depending upon the number of H-atoms attached to it. Further, the free radicals may be categorized as alkyl, allyl or benzyl radicals.
Primary free radicals: When radical is attached to two H-atoms.
Secondary free radicals: When radical is attached to one H-atoms.
Tertiary free radicals: When radical is not attached to any H-atoms.
Allylic free radicals: When radical is attached to two H-atoms and is in conjugation (resonance) with double bond.
To learn more about free radicals visit:https://brainly.com/question/29422803
#SPJ4
nitrogen monoxide is produced by combustion in an automobile engine. according to the following reaction, how many grams of oxygen gas are necessary to form 0.154 moles nitrogen dioxide?
The nitrogen monoxide produced by the combustion in the automobile engine. the grams of the oxygen gas are used to form the 0.154 moles of the nitrogen dioxide is 2.46 g.
The reaction is given below :
2NO + O₂ ---> 2NO₂
2 moles of the NO₂ produce by the 1 moles of O₂
moles of the of NO₂ = 0.154 mol
moles of the O₂ = (1/2) × 0.154
= 0.077 mol
molar mass of O₂ = 32 g/mol
mass of O₂ = moles × molar mass
= 0.077 × 32
= 2.46 g
The mass of oxygen gas needed to form the nitrogen dioxide is 2.46 g.
To learn more about nitrogen dioxide here
https://brainly.com/question/16890624
#SPJ4
A chemist decomposes samples of several compounds; the masses of their constituent elements are shown. Calculate the empirical formula for each compound. a. 1.651 g Ag, 0.1224 g O b. 0.672 g Co, 0.569 g As, 0.486 g O c. 1.443 g Se, 5.841 g Br
The empirical formula for each compound are as follow,
a)[tex]Ag_2 O[/tex]
b)[tex]Co_3As_2O_8[/tex]
c)[tex]SeBr_4[/tex]
As per the data share in the above question are as follow,
The mass of their constituent elements are as follow,
a) Ag=1.651 g
O=0.1224 g
b)Co =0.672 g
As =0.569 g
O=0.486 g
c) Se =1.443 g
Br =5.841 g
We have to calculate the empirical formula for each compound.
a)Now Moles of (given mass upon Molar mass) [tex]Ag=\frac{1.651}{108} =0.015 \:moles[/tex]
Moles of [tex]O=\frac{0.1224}{8\times 2} =0.0077 \:moles[/tex]
Smallest mole value [tex]0.0077 \:moles[/tex]
Divide all component by smallest mass.
Therefore [tex]Ag \Rightarrow\frac{0.015}{0.0077} \rightarrow2\\\\O \Rightarrow\frac{0.0077}{0.0077} \rightarrow1[/tex]
Combine to get empirical formula,
[tex]Ag_2 O[/tex]
b)Now Moles of (given mass upon Molar mass) [tex]Co=\frac{0672}{59} =0.011 \:moles[/tex]
Moles of [tex]As=\frac{0.569}{75} =0.0076\: moles[/tex]
Moles of [tex]O=\frac{0.486}{16} =0.0304 \:moles[/tex]
Smallest mole value [tex]0.0076 \:moles[/tex]
Divide all component by smallest mass.
Therefore
[tex]Co \Rightarrow\frac{0.011}{0.0076} \rightarrow1.5\rightarrow1.5 \times 2\rightarrow3\\\\As \Rightarrow\frac{0.0076}{0.0076} \rightarrow1\rightarrow1 \times 2\rightarrow2\\\\O \Rightarrow\frac{0.0304}{0.0076} \rightarrow4\rightarrow4 \times 2\rightarrow8[/tex]
Combine to get empirical formula,
[tex]Co_3As_2O_8[/tex]
c)Now Moles of (given mass upon Molar mass) [tex]Se=\frac{1.443}{79} =0.018 \:moles[/tex]
Moles of [tex]Br=\frac{5.841}{80} =0.073 \:moles[/tex]
Smallest mole value [tex]0.018 \:moles[/tex]
Divide all component by smallest mass.
Therefore
[tex]Se \Rightarrow\frac{0.018}{0.018} \rightarrow1\\\\Br \Rightarrow\frac{0.073}{0.018} \rightarrow4[/tex]
Combine to get empirical formula,
[tex]SeBr_4[/tex]
For such more question on empirical formula.
https://brainly.com/question/1603500
#SPJ4
According to simple valence bond theory (no promotion/hybridization), which of the following species would not form a bond with carbon? Consider the electronic configuration of the ground state of the element
(a) LiC
(b) BeC
(c) BC
(d) C2
(e) CN
BeC will will not form a pair because no free element is available with Be.
The elements given in the above question is as follow,
Now consider the ground state of given element we get,
[tex]Li=1s^2,2S^1\\Be=1s^2,2S^2\\B=1s^2,2S^2,2p^1\\C=1s^2,2S^2,2p^2\\N=1s^2,2S^2,2p^3[/tex]
Now, for balance bond theory,
Consider,
a) LiC
[tex]Li=1S^2,2S^1\\C=1S^2,2S^2,2P^2[/tex]
It will form a bond because unpaired electrons are present.
b)Bec
[tex]Be=1s^2,2S^2\\C=1s^2,2S^2,2p^2[/tex]
If will not form a pair because no free element is available with Be.
c)BC
[tex]B=1s^2,2S^2,2p^1\\C=1s^2,2S^2,2p^2[/tex]
It will form a bond because unpaired electrons are present in Boron and carbon.
d)[tex]C_2[/tex]
[tex]C=1s^2,2S^2,2p^2[/tex]
It will form a bond because unpaired electrons are present.
e)CN
[tex]C=1s^2,2S^2,2p^2\\N=1s^2,2S^2,2p^3[/tex]
It will form a bond because unpaired electrons are present.
For more such question on valence bond.
https://brainly.com/question/23129240
#SPJ4
g which of the following nuclides are most likely to decay via positron emission? na-26 i-121 ca-42 s-30 sb-122
In order to balance out nuclides with an unbalanced protons to neutrons ratio, decay is used.generating a neutrino and a positron (01e+) (v).
What results from the MG 23 positron decay?There are 12 protons & 11 neutrons in magnesium-23.The ratio of neutrons to protons is 11:12, or 0.92:1.As a result of positron emission, sodium-23 is created.
What is the result of NA 22 emitting positrons?A synthetic isotope called sodium-22 has a half-life about 2.6 years.It undergoes a steady neon-22 decay, producing a positron (+ decay).
To know more about positron emission visit :
https://brainly.com/question/20388835
#SPJ4
help asha balance the following equation by completing the equation with the correct numbers: co equation c co2
The Balanced Eqn is 2CO+O2→2CO2.
A chemical reaction is a method wherein one or more materials, also called reactants, are transformed into at least one or more special substances, called merchandise. Materials are both chemical elements or compounds.
A few synthesis reactions can result in more than one product. Photosynthesis is one of the maximum important chemical reactions on earth. It allows plants and a few microbes to transform water and carbon dioxide gas into storable sugar and oxygen.
Chemical compounds are made from atoms of different elements, joined collectively through chemical bonds. A chemical synthesis normally involves the breaking of existing bonds and the formation of recent ones.
Learn more about Chemical reactions here:-brainly.com/question/26505550
#SPJ4