1. Use your knowledge of valence electrons and how they affect bonds to figure out how carbon (Group 14) and oxygen (Group 16) would be attached to one another. In carbon dioxide (CO2), how is the compound structured? (Use “–” to represent a single bond and “=” to represent a double bond.)(1 point)

A) O=C–O

B) O=C=O

C) C=O–O

D) C–O–O

2. Methane’s chemical formula is CH4. Is there a bond between any of the hydrogen atoms? Why or why not?(1 point)

A) Yes, there is because they form a long chain in order to all have stable outer energy shells.

B) Yes, there is because there are one too many hydrogen atoms for carbon to handle alone, so one hydrogen must bond with another.

C) No, there is not because carbon needs four bonds, so it bonds with each hydrogen atom; hydrogen only forms one bond.

D) No, there is not because it would form H2 instead of methane if hydrogen-bonded with itself.

3. In hydrogen peroxide (H2O2), which option best shows how the atoms are ordered?(1 point)

A) H–O–O–H

B) O–H–O–H

C) H–O–H–O

D) O–H–H–O

The emission lines of an element is characteristics of the element and can be thought of like a fingerprint for elements. Emission spectra is used to identify the elements.

The electromagnetic radiation spectrum produced when an electron changes from a high energy state to a lower energy state is known as the emission spectrum of a chemical element or chemical compound.

The energy difference between the two states is equal to the photon energy of the emitted photon. Each atom contains a large number of potential electron transitions, and each transition has a distinct energy difference.

An emission spectrum is made up of a variety of transitions that result in various radiated wavelengths. The emission spectra of each element is distinct. Therefore, option d is correct.

Find more on emission lines:

https://brainly.com/question/20461055

#SPJ6

Answer:

Conduction is between solids, convention is between liquid and radiation between the sun and a body on the earth

Answer:

In conduction, heat transfer takes place between objects by direct contact. In convection, the heat transfer takes within the fluid. In radiation, heat transfer occurs through electromagnetic waves without involving particles. ... The heat transfer occurs through a heated solid object.

Explanation:

Answer:

8)Dinitrogen tetraoxide

9)+5

10)NH4HSO4

Explanation:

please mark me as brainlest

Answer:There are two main exceptions to electron configuration: chromium and copper. See below

Explanation:

These two elements are exceptions because it is easier for them to remove a 4s electron and bring it to the 3d subshell, which will give them a half filled or completely filled subshell, creating more stability.

Explanation:

18 A

19 C

20 C

22 A

24 B

hope this helps you.

Answer:

5.2M, 5M, 0.975M, 28M

Explanation:

M = ( moles × 1000 ) ÷ volume

Molarity is affected by temperature. Its unit is mole/litre. It measure the concentration of any solute in a solution. Thus the molarity of [tex]KNO_{3}[/tex],[tex]BaCl_{2}[/tex],[tex]Na_{2}CO_{3}[/tex] and[tex]C_{6}H_{12}O_{6}[/tex] are 5.2mol/litre, 5mol/litre, 0.97mol/litre, 28mol/litre respectively.

Molarity can be calculated by dividing  number of moles of solute by volume of solution in liter.

Other concentration terms are molality, normality and mole fraction. Molarity can be used to find out the ionic strength of any solution

Mathematically,

Molarity= number of moles of solute/volume of solution in litre (1)

1) Molarity of [tex]KNO_{3}[/tex]= {1.30 mol ×(1000ml/l)}÷250.0 mL=5.2mol/litre

2)Molarity of [tex]BaCl_{2}[/tex]= {0.500 mol  ×(1000ml/l)}÷100.0 mL=5mol/litre

3)Molarity of[tex]Na_{2}CO_{3}[/tex]= {0.195 mol   ×(1000ml/l)}÷200.0 mL=0.97mol/litre

4)Molarity of [tex]C_{6}H_{12}O_{6}[/tex] = {7.00 mol  ×(1000ml/l)}÷ 250.0 mL=28mol/litre

Thus the molarity of [tex]KNO_{3}[/tex],[tex]BaCl_{2}[/tex],[tex]Na_{2}CO_{3}[/tex] and[tex]C_{6}H_{12}O_{6}[/tex] are 5.2mol/liter, 5mol/litre, 0.97mol/litre, 28mol/litre respectively.

Learn more about Molarity, here:

https://brainly.com/question/16727614

#SPJ2

Answer:

[tex]51y6. \times { \times }^{2} [/tex]

Beautiful vases, figurines, and plate are a kind of mixture called colloid.

A colloid comprises of the dispersion of one substance in another. Therefore in a colloid there must be;

These beautiful vases, figurines, and plate  are made of ceramics. In ceramics, composite materials and fibers are dispersed in a polymer matrix. Hence these beautiful vases, figurines, and plate are made of colloids.

Learn more: https://brainly.com/question/1527403

Answer:

a person or persons murder

Answer: the aerodynamics of hummingbird wings.

Explanation: i got it right

Answer:

3.

Explanation:

potassium

bromine

oxygen

Answer:

b. 39 Neutrons would be correct.

Answer:

4.76

Explanation:

Answer:

Equal

Explanation:

Nitric Acid is a strong acid and therefore completely disassociates.

Explanation:

thermoplastic polymer

Answer:

B. They are clones of the parent plant

Explanation:

[tex]\\ \sf\longmapsto 9.63\times 10^{-2}m=9.63\times 10^{-2}\times 10^{-9}m=0.0963\times 10^{-9}m=0.0963nm[/tex]

[tex]\\ \sf\longmapsto 6.02\times 10^3ks=6.03\times 10^6s[/tex]

[tex]\\ \sf\longmapsto 8.9\times 10^8\mu g=8.9\times 10^4cg[/tex]

[tex]\\ \sf\longmapsto 4.12\times 10^{-4}Mg=4.12\times 10^{-1}g=0.412g[/tex]

[tex]\\ \sf\longmapsto 7.33\times 10^{-2}Tl=7.33\times 10dL=73.3dL[/tex]

[tex]\\ \sf\longmapsto 0.73kL=0.73(1000)L=730L[/tex]

[tex]\\ \sf\longmapsto 5.93cm^3=0.00000593m^3[/tex]

[tex]⇒9.63 \times {10}^{ - 2} m = 9.63 \times {10}^{ - 2} \times {10}^{9} = 9.63 \times {10}^{ 7} nm \\ [/tex]

[tex]⇒6.02 \times {10}^{3} ks = 6.02 \times {10}^{3} \times {10}^{3} = 6.02 \times {10}^{6} s \\ [/tex]

[tex]⇒8.9 \times {10}^{8} \mu g = 8.9 \times {10}^{8} \times {10}^{ - 4} = 8.9 \times {10}^{4}cg \\ [/tex]

[tex]⇒4.12 \times {10}^{ - 4} mg = 4.12 \times {10}^{ - 4} \times {10}^{3} = 4.12 \times {10}^{ - 1}g \\ [/tex]

[tex]⇒7.33 \times {10}^{ - 2} TL = 7.33 \times {10}^{ - 2} \times {10}^{13} = 7.33 \times {10}^{ 11} dL\\ [/tex]

[tex]⇒0.73kL = 0.73 \times {10}^{3} = 730L[/tex]

[tex]⇒5.93cm {}^{3} = 5.93 \times 10 {}^{6} = 5.93 \times 10 {}^{6}m {}^{3} \\ [/tex]

[tex]⇒498.82cg = 498.82 \: \times 10 = 4988.2 \: cg \\ [/tex]

Answer:

có trong vietjack nè má, vô coi đi

Explanation:

https://khoahoc.vietjack.com/question/7374/thuy-phan-hoan-toan-62-5-gam-dung-dich-saccarozo-17-1-trongmoi-truong-axit

Answer:

hexagon

Explanation:

Answer:

um how is this a question? is there no info on how many protons neutrons electrons and what elements are in the compound. how do you find out a compound if you don't know what the elements in it are

Answer:This is a very interesting question. I think of it like this. You have a piece off ice floating in the water. Let's say a portion off. It is submerged. No. If this the portion off the sub marched portion has a volume be, it means that the buoyant force will be times the density off water times G. Now this will be equal to the point force, which is equal to the weight off the ice block. Now, once I this ice turns into water, it will still have the same rate. But now its density will be equal to that of water. So it's wait will be saying mass times G. Now you can cancel T on mass is equal to three times rope. Now, this week is this volume and if you notice, row is also the density of water, which means this mass of water contains will help this volume. It means once the ice becomes water, it perfectly fits into this volume, which means the water level's stays exactly the same. It's almost magical, but what happens if there isn't a butt in a bubble? You can think off it in a slightly mathematical way, If you have an air bubble in on Ice Cube, it's total density. Its average density will be less than the density off ice, but an easier way to think about it is like this. You have a piece off ice, which has in a bubble in it on dhe, obviously that it's water here and now. Once the ice melt, the amount of water displaced will be. The volume of the water displaced will equal the weight off the ice. So the what? The water in the ice, if it's exactly in this volume, so it must still be the same. But the answer will be different if you have a great off sandal. If you have a grain of sand, let's say somewhere over here the total density off the ice cube will be larger. The average density on once the ice melt the sand simply false down, which means this ice this piece off ice was further down than it for the lower in the water than it would have been if it was simply made off ice. So to make up for that, when the ice melts, the amount off the volume off the water will be less than the amount of water displaced, so the level of water will decrease if it were if there were a grain of sand in the ice, so you would expect that the water level would tries if, uh, in the case off the air bubble. But it's the identity of baby. It is so small that it simply doesn't count.

Explanation:

Answer:

Accuracy is the degree of closeness to true value.

Precision is the degree to which an instrument or process will repeat the same value.

Hope it helps....

Answer:

Accuracy and precision are alike only in the fact that they both refer to the quality of measurement, but they are very different indicators of measurement. Accuracy is the degree of closeness to true value. Precision is the degree to which an instrument or process will repeat the same value

Answer:

t5gbt 4 tbg3rvb tjj5tb4b4bv

Explanation:fhtb v4bvtvhbvv bh

Answer:

that's true

Explanation:

At the atomic level, electrons absorb a particular wavelength of energy and move from a lower to a higher energy level.

In the absorption spectrum, energy is absorbed causing a specie to move from a lower to a higher energy level. This is shown in the diagram attached to this answer.

At the atomic level, electrons absorb a particular wavelength of energy and move from a lower to a higher energy level.

Learn more about absorption spectrum: https://brainly.com/question/1195122

Orange Juice is a heterogeneous mixture. This means the orange juice contains more than one component.

This is true because orange juice contains two components. They are:

The reason why the pulp in orange juice sinks to the bottom is because the pulp is denser than the juice. So it is heavier and sinks to the bottom.

To learn more, visit the link:

https://brainly.com/question/23175944

Answer:

My answer is d. hope this'll help

Answer:

clock it'll luck is be FL KS Fb it to KS go out to if go off to kg HR to kg to if he do well all

Answer:

This is the answer.

Explanation:

The gas that is to be identified in the problem is C2H2

From the ideal gas equation;

PV = nRT

P = pressure of the gas = 745 torr or 0.98 atm

V = volume of the gas =  4.13 mL or 0.00413 L

n = number of moles of the gas = ?

R = gas constant = 0.082 atm Lmol-1K-1

T = temperature of the gas = 23°C + 273 = 296 K

n = PV/RT

n = 0.98 atm ×  0.00413 L/0.082 atm Lmol-1K-1 × 296 K

n = 0.00405/24.272

n = 0.000167 moles

Recall that;

Number of moles = mass/molar mass

molar mass = mass/Number of moles

molar mass = 0.00500-gram/0.000167 moles

molar mass = 30 g/mol

Since it is a hydrocarbon;

[12 +1]n = 30

n = 30/13

n = 2

The gas is C2H2

Learn more:https://brainly.com/question/9743981

Answer:

Explanation:

1mol NaOH---->40

0.01mol NaOH------>x

X=40×0.01=0.4

The mass of KOH reacted is 2.576 g. To have a 10% excess KOH, i need 2.833 g of KOH.

The equation of the reaction is;

2 Al(s) + 2 KOH(aq) + 6H20 (l) --------> 2K+ (aq) + 2 Al(OH)4^- (aq) + 3H2(g)

We are told that 1.25 g of Al was used in the reaction, hence;

Number of moles of Al = 1.25 g/27 g/mol = 0.046 moles

To obtain the amount of KOH required for the reaction;

2 moles of Al reacts with 2 moles of KOH

0.046 moles of Al also reacts with 0.046 moles of KOH

Mass of KOH reacted = 0.046 moles of KOH × 56 g/mol = 2.576 g

To have a 10% excess KOH;

Let the needed mass of KOH be x

x =2.576 g + (0.1 × 2.576 g)

x = 2.833 g

Learn more: https://brainly.com/question/10079361

Assuming you start with 1.25 g of pure aluminum, calculate the following:

The volume, in liters, per kg of the Himalayan pink salt would be 0.97 L

Recall that: density = mass/volume

Hence: volume = mass/density

In this case, the density of the Himalayan pink salt is 1.03 while the mass we are working with is 1 kg.

1 kg is equivalent to 1000 g

Thus: volume = 1000/1.03

                           = 970.87 mL

Divide by 1000 to convert to L

                        970.87/1000 = 0.97 L

More on density can be found here: https://brainly.com/question/2040396