The frequency of the other wave is 613 Hz or 607 Hz.
The difference between the frequencies of two waves is called the beat frequency.
Here, one wave has a frequency 610 Hz and the beat frequency is 3 beats per second.
Which has a higher frequency is not mentioned. Therefore, there are two possibilities.
Δf = | 610 - 613 | = 3
or
Δf = | 610 - 607 | = 3
Therefore, the frequency of the other wave is 613 Hz or 607 Hz.
Learn more about beat frequency here:
https://brainly.com/question/14157895
#SPJ4
A certain motor is capable of doing 5600 joules of work in 10 seconds. What is the power output of this motor?
Answer:
Power output of the motor is 560W.Explanation:
Power output = ?Work done = 5600JTime = 10sPower output = work done/timePower output = 5600J/10sPower output = 560WTherefore the Power output of the motor is 560W.A 0.08m long spring is attached vertically to the ceiling. after 66kg mass is attached to the spring it has a length of 2.1m. determine the spring's force constant. use g=10
Answer:
The spring constant is 647.05 N/m.
Explanation:
The weight of the mass is W=mg
W=66*10
W=660
The spring force is given by the formula F=kx
where k is the spring force constant.
The spring force is equal to the weight of the mass. Therefore equate W and F.
kx= 660
k=660/x
Difference in length x=2.1-0.08= 1.02 m
k=660/1.02
k=647.05 N/m
https://brainly.com/question/12982193
#SPJ10
Spiderman, whose mass is 80.0 kg, is dangling on the free end of a 12.0-m-long rope, the other end of which is fixed to a tree limb above. By repeatedly bending at the waist, he is able to get the rope in motion, eventually getting it to swing enough that he can reach a ledge when the rope makes a 60.08 angle with the vertical. How much work was done by the gravitational force on Spiderman in this maneuver
4.719kJ is the work done by the gravitational force.
Given,
Mass of Spiderman, m = 80 kg
Acceleration due to gravity, g = 9.8[tex]m/s^{2}[/tex]
Formula used
F= mg
So, The force on Spiderman is= 80 × 9.8 = 784N
As Spiderman is dangling on the free end of a long rope, the other end of which is fixed to a tree limb above.
That's why only his vertical movement makes a difference in how much work gravity does.
So, we only consider the y coordinates here
As the rope is 12m long ,
y coordinate below the tree limb is –12m. (negative sign because the value is present below the origin.)
As it is given that the rope makes a 60.08° angle with the vertical.
So his final y coordinate is (–12.0m)cos60.08°
= -12×0.498 = -5.98m
Change in elevation (ΔS)= –5.98m–(–12.0m)= 6.02m.
The work done by the gravity on Spiderman is:
W=FΔscosθ….. (1)
where, F = Force of gravity on Spiderman
ΔS = Change in the elevation
θ = angle between force and the displacement
Putting the values in equation (1)
W = 784 × 6.02 ×cos 180°
= 784 × 6.02 × -1 = 4719.68 J = 4.719kJ
Hence, the work was done by the gravitational force on Spiderman in this maneuver is 4.719 kJ.
Learn more about Work done here https://brainly.com/question/23653951
#SPJ4
Gneiss and quartzite rocks are found in the metamorphic surface bedrock in which new york state landscape region ?
Answer: It's mostly found near Jamestown , New York
A simple harmonic oscillator has an amplitude of 3. 50 cm and a maximum speed of 26. 0 cm/s. What is its speed when the displacement is 1. 75 cm?.
0.22 m/s is the speed when the displacement is 1.75 cm.
Given:
A simple harmonic oscillator has;
Amplitude (A) =3.50 cm = 0.035 m
Maximum Speed (Vmax) = 26.0 cm/s = 0.26 m/s
Displacment (d) = 1.75cm =0.0175 m
The displacement d, whose maximum is the amplitude A , is expressed as:
∴ d = A Sin wt
[tex]\frac{d}{A}[/tex] = Sin wt
t = [tex]\frac{1}{W}[/tex] Sin⁻¹ ( [tex]\frac{d}{A}[/tex] )
v = - Aw cos wt
v = - Aw cos w [ [tex]\frac{1}{W}[/tex]sin⁻¹ ([tex]\frac{d}{A}[/tex]) ]
v = - Aw cos [ sin⁻¹ ([tex]\frac{d}{A}[/tex]) ]
Speed, v = Vmax cos [ sin⁻¹ ([tex]\frac{d}{A}[/tex]) ] ∵ Vmax = Aw
v = 0.26 cos [ sin⁻¹ ( [tex]\frac{0.0175}{0.035}[/tex]) ]
v = 0.22 m/s
Therefore, 0.22 m/s is the speed when the displacement is 1.75 cm.
Learn more about simple harmonic motion here:
https://brainly.com/question/20885248
#SPJ4
Along the frictionless path you have chosen in question 8, the main force(s) acting on the puck after receiving the kick is (are):
O a downward force of gravity.
a downward force of gravity, and a horizontal force in the direction of motion.
a downward force of gravity, an upward force exerted by the surface, and a horizontal force in the direction of motion.
a downward force of gravity and an upward force exerted by the surface.
none. (No forces act on the puck.)
The main force(s) acting on the puck after receiving the kick is a downward force of gravity, an upward force exerted by the surface, and a horizontal force in the direction of motion.
What is friction?Friction can be defined as that resistance that one surface or object encounters when moving over another.
So therefore, the main force(s) acting on the puck after receiving the kick is a downward force of gravity, an upward force exerted by the surface, and a horizontal force in the direction of motion
Learn more about friction:
https://brainly.com/question/24338873
#SPJ1
You took a second ball headed to a cliff. You dropped this ball straight down with a velocity of 9.3 m/s. The ball hit the ground exactly 8.0s after you released it. How high is the ciff?
Answer:
The cliff is 74.4m.
Explanation:
The reading above clearly state that a ball is dropped straight down with the speed of 9.3m/s and hit the ground exactly at a time of 8.0s after you released it. And it is asking for the distance of the cliff.
In speed formula make distance the subject.
Therefore Distance = speed × time
Distance = 9.3mls × 8.0s = 74.4m
Therefore the cliff is 74.4m.
12. A 2-kg soccer ball has a recorded acceleration of 30 m/s² after it is
kicked. What was the force of the kick?
Ο Α.Ο.Ν
OB. 15 N
OC. 30 N
OD. 60 N
1 point
Which is a valid prediction about the continuous function f(x)? f(x) ≤ 0 over the interval (–[infinity], [infinity]). f(x) > 0 over the interval (–1, [infinity]). f(x) ≥ 0 over the interval [–1, 1]. f(x) < 0 over the interval (0, 2).
The valid prediction is f(x) ≥ 0 over the interval [–1, 1]
The question seems to be incomplete the complete question is given in the image!!!!
A function from a set X to a set Y is an assignment of an element of Y to each element of X. The set X is called the domain of the function and the set Y is called the codomain of the function.
The given values for x = 3 , f(x) = -15 Here f (x) < 0
When x =0, f(x) = 5 Here f(x) > 0
So for f(x) ≤ 0 over the interval (–[infinity], [infinity]) is the wrong option
When x = 2 f(x)=-5 here f(x) < 0
So , f(x) > 0 over the interval (–1, [infinity]) is also a wrong option
When x = 1 f(x)=0 here f(x) > 0
So , f(x) < 0 over the interval (0, 2) is also a wrong option
When x = -1 f(x) = 0
When x = 0 f(x) = 5
When x = 1 f(x) =0
So , f(x) ≥ 0 over the interval [–1, 1] is the valid prediction
Learn more about Functions here
https://brainly.com/question/10439235
#SPJ4
g Three projectiles are launched from the same level on flat ground. Each reaches the same maximum height before returning to the ground, but projectile 3 (in blue) has the largest range, followed by projectile 2 (in green). Projectile 1 has the smallest range (in red). Rank the three from largest to smallest according to:
All objects fall at the same rate, what is the acceleration of the force of gravity?
Answer:
9.8 m/s
Explanation:
If these objects are in free fall, meaning that their downward movement is only due to the force of gravity, then acceleration due to gravity is about 9.8 metres per second per second.
which process receives geo thermal energy naturally
Which equation represents the law of conservation of energy in a closed system? kei pei = kef pef pei pef = kei kef kei – kef = pei – pef kei – pef = pei – kef
In equation form, Or KE+PE=constant KEi+PEi=KEf+PEf where i and f denote initial and final values. This is known as the conservation of mechanical energy.
Κi + Ûg,i = kf + U,g,f
A closed system is a system where exists energy interactions with surroundings, but not mass interactions.
If we neglect any energy interactions from boundary work, heat, electricity, magnetism, and nuclear phenomena and assume that process occurs at a steady state and all effects from non-conservative forces can be neglected, then the equation of energy conservation is reduced to this form:
K + Ug = 0 (1)
Where:
K -Change in kinetic energy of the system, measured in joules.
Ug - Change in gravitational potential energy of the system, measured in joules.
If we know that K = Ki - Kf and Ug = Ug,i - Ug,f, then we get the following equation:
Ki + Ug,i = Kf + Ug,f, (2)
Where i and f stand for initial and final states of each energy component.
Hence, the right answer is Ki + Ug,i = Kf + Ug,f,.
Learn more about the law of conservation of energy at
https://brainly.com/question/166559
#SPJ4
Answer:
A KEi + PEi = KEf + PEf
Explanation:
A wire is joined to points X and Y in the circuit diagram shown. A diagram of a circuit with a power source on the left. Directly above the power source is a dot labeled X and then a circle with an X in it. The circuit then splits with one path straight back to the power source and the other path has 3 circles with X in them labeled 2, 3, and 4 respectively. There is a point labeled Y between circles 2 and 3.A diagram of a circuit with a power source on the left. Directly above the power source is a dot labeled X and then a circle with an X in it. After the x are 4 different circles on the circuit with Xs in them labeled 1, 2, 3, and 4 respectively. There is a point labeled Y in between circles 2 and 3. There is a branch of the circuit from X to Y. How does the circuit change when the wire is added?
A closed circuit occurs and makes all bulbs turn off.
An open circuit occurs and makes all bulbs turn off.
A short circuit occurs and makes bulbs 3 and 4 turn off but keeps bulbs 1 and 2 lit.
A short circuit occurs and makes bulbs 1 and 2 turn off but keeps bulbs 3 and 4 lit.
The circuit change when the wire is added will see a short circuit occur and makes bulbs 1 and 2 turn off but keeps bulbs 3 and 4 lit. Option D. This is further explained below.
How does the circuit change when the wire is added?Generally, Electronic circuits consist of a series of interconnected parts that form a closed loop through which electricity may flow.
In conclusion, If two wires are linked together, a short circuit will develop, cutting power to bulbs 1 and 2. But there is no impact on bulbs 3 and 4. There is no problem with bulbs 3 and 4.
Read more about circuit
https://brainly.com/question/21505732
#SPJ1
what is magnetic shielding?
What are the products of a fusion reaction? Check all that apply.
lighter atoms
energy
heavier atoms
a neutron
a proton
Energy, heavier atoms atoms, neutron and a proton are the products of a fusion reaction.
What are the products of a fusion reaction?
Nuclear fusion is a type of reaction in which two or more atomic nuclei fuse or combine to form heavy nuclei and subatomic particles such as neutrons or protons and release of energy.
So we can conclude that Energy, heavier atoms, neutron and a proton are the products of a fusion reaction.
Learn more about reaction here: https://brainly.com/question/11231920
#SPJ1
Answer:
B C D
Explanation:
Assume the first dot for animal A represents t = 0. At which time does animal B overtake animal A?
The time in which the animal B overtake animal A according to the motion map is at 2 seconds.
What is a Motion map?This is referred to as one-dimensional plots built off of a position line and depicts velocity and acceleration.
The time in which Animal B is ahead of animal A is at 2 seconds which therefore makes it the most appropriate choice.
Read more about Motion map here https://brainly.com/question/5064705
#SPJ1
6 An infinite non-conducting sheet has a surface charge density o = 5.80pC/m². (a) How
much work is done.
by the
the electric field due to the sheet if a particle of charge
ue to
q+1.60x10-¹°C is moved from the sheet to a point P at distance d= 3.56cm from the
sheets. (b) If the electric potential V is defined to be zero on the sheet, what is V at P
a. Work done = 2. 0648 Joules
b. Electrical potential, V = 4. 03 × 10^10 volts
How to determine the parameters
a. Work done = force × distance
Force = density × acceleration due to gravity
Force = 5. 80 × 10
Force = 58 Newton
We have that distance = 3. 56cm = 0. 0356 m
Work done = 58 × 0. 0356
Work done = 2. 0648 Joules
b. The formula for electric potential is given thus,
Electric potential, V = [tex]k\frac{q}{r}[/tex]
r = 0. 0356m
k = Coulomb's constant = [tex]8.98*10^9[/tex]kg⋅m3⋅s−4⋅A−2.
q= 1.60x10^-¹C
substitute into the formula
Electric potential, V = [tex]8. 98[/tex] × [tex]10^9[/tex] × [tex]\frac{1. 6 * 10^-^-1}{0. 0356}[/tex]
Electric potential, V = [tex]8. 98 * 10^9[/tex] × [tex]4. 494[/tex]
Electric potential, V = [tex]4. 03 * 10^1^0[/tex] volts
Learn more about electric potential here:
https://brainly.com/question/14812976
#SPJ1
A 1000-kg car traveling at 70 m/s takes 3 m to stop under full braking. The same car under similar road conditions, traveling at 140 m/s, takes ______________ m to stop under full braking
A [tex]1000[/tex] kg car travelling with velocity [tex]70[/tex]m/s takes [tex]3[/tex] to stop under full braking. And the same car under similar road conditions travelling with velocity [tex]140m/s[/tex] takes [tex]12m[/tex] to stop under full braking.
How can we find Distance at velocity [tex]140m/s[/tex] ?
In case of [tex]70m/s[/tex] car stop under full braking after [tex]3m[/tex].
So we can find the acceleration by third equation of motion
[tex]v^2=u^2+2as[/tex]
Here [tex]v[/tex] is final velocity which is zero.
[tex]u[/tex] is initial velocity which is [tex]70m/s[/tex]
[tex]s[/tex] is displacement
So substitute the values in equation of motion
[tex]0=70^2+2*a*3\\-4900/6=a\\-816.6m/s^2=a[/tex]
In case of initial velocity [tex]140m/s[/tex] acceleration is same because same car and same road condition so acceleration is [tex]-816.6m/s^2[/tex]
We can find the distance by using the equation of motion
[tex]v^2=u^2+2as\\0=140^2+2*(-816.6)*s\\-19600/-1633.2=s\\12m=s[/tex]
Distance is [tex]12m[/tex]
Learn more about distance and velocity here:
https://brainly.com/question/28018329
#SPJ4
A Eureka can of mass 60g and cross sectional area of 60 square centimeters is fillied with water of density 1g/ cubic centimeters. A piece of steel of mass 20g and density 8g/ cubic centimeters is lowered carefully into the can.
(a) Calculate the total mass of water and the Eureka Can before the metal was lowered.
(b) Calculate the volume of the water that overflowed.
(c) Calculate the final mass of the Eureka Can and its contents.
a.600 cm³
b. 2.5 g/cm³
c. 2.0775 kg
What is Eureka moment?
In Physics, this Archimedes' Eureka moment is called the Archimedes Principle, which states that when a body is immersed in a liquid, it experiences an upward buoyant force, which is equal to the weight of the liquid displaced by the body.
According to the question
Mass of Eureka is 60g
Cross sectional area is 60 square centimeters
Mass of steel piece is 20g
Density = 8g /cubic centimeter
a)The total mass of the can before the metal was lowered we need to add the mass of the eureka can and the mass of the water in the can.
To find the mass of the water but we can easily find if we know the volume of the can.
In order to calculate the volume we would have to multiply the area of the cross section by the height.
Here,
60cm² x 10cm = 600 cm³
To find the mass that water has in this case we have to multiply the water's density by the volume,
so we get....
[tex]\frac{1g}{cm^3}[/tex] x 1000 = 1000g or 1kg
Now can calculate the total mass of the can before the metal was lowered, by adding the mass of the water to the mass of the can.
So we get....
1000g + 60g = 1060g or 1.06kg
b)The volume of the water that over flowed will be equal to the volume of the metal piece since, when we add the metal piece, the metal piece will force out the same volume of water as itself, to understand this more deeply you can read the about "Archimedes principle".
Knowing this we just have to calculate the volume of the metal piece an that will be the answer.
So this time in order to find volume we will have to divide the total mass of the metal piece by its density.
So we get
20g ÷ [tex]\frac{8}{cm^3}[/tex] = 2.5 g/cm³
c)Now to find out the total mass of the can after the metal piece was lowered we would have to add the mass of the can itself, mass of the water inside the can, and the mass of the metal piece.
We know the mass of the can, and the metal piece but we don't know the mass of the water because when we lowered the metal piece some of the water overflowed, and as a result the mass of the water changed. So now we just have to find the mass of the water in the can keeping in mind the fact that 2.5 overflowed.
So now we the same process as in number a) just with a few adjustments.
[tex]\frac{1g}{cm^3}[/tex] x (1000 - 2.5) = 997.5g
So now that we know the mass of the water in the can after we added the metal piece we can add all the three masses together (the mass of the can.
The mass of the water, and the mass of the metal piece.
Hence,
1060g + 997.5g + 20g = 2077.5 g or 2.0775 kg
Learn more about Archimedes Principle here:
https://brainly.com/question/13106989
#SPJ1
A 43-kg child sits in a massless swing. With what horizontal force must the seat be pulled so that the ropes form an angle of 35o with respect to the vertical? Group of answer choices 300 N 320 N 340 N 360 N
The horizontal force that the seat must be pulled so that the ropes form an angle of 35o with respect to the vertical is 345.2 N.
Horizontal force to be appliedThe horizontal force that the seat must be pulled so that the ropes form an angle of 35o with respect to the vertical is calculated as;
F = Wcosθ
where;
W is weight of the childθ is angle of inclination of the ropeF = (43 x 9.8) x cos(35)
F = 345.2 N
Learn more about horizontal force here: https://brainly.com/question/12979825
#SPJ1
Linear Velocity What is the linear velocity in cm>min for any edge point of a 12-cm-diameter CD (compact disc) spinning at 10,350 rev>min?
3,89,988 cm/min is the linear velocity
Given,
Diameter of CD = 12 cm
So, Radius of CD = 6 cm
CD is spinning at 10350 rev/min
Firstly , convert rev/min into rad/min
1 rev = 2π radians
10350 rev/min = 10350 × 2π
= 64998 rad/min
Formula used,
[tex]v=rw[/tex] where,
[tex]v[/tex] is the Linear velocity
[tex]r[/tex] is the radius
[tex]w[/tex] is the angular velocity
[tex]v[/tex] = 6 cm × 64998rad/min
= 3,89,988 cm/min
Thus, linear velocity for any edge point of a 12-cm-diameter CD (compact disc) spinning at 10,350 rev/min is 389988 cm/min.
Learn more about Angular speed here https://brainly.com/question/540174
#SPJ4
When encountering a powerboat in darkness or reduced visibility, what do visible white and red lights indicate?.
A visible white and red light indicate a second craft is coming from the starboard (right) side.
What is a navigation light?A navigation light often referred to as a running light or position light, is a source of illumination aboard a ship, plane, or spacecraft that provides information about the location, course, or condition of the vehicle. Red and green navigation lights help with traffic control by indicating the orientation of the craft.
All navigation light systems typically comprise one or more white lights as well as red and green sidelights that designate the boat's port and starboard sides.
Having a flashlight on board is also essential since you never know when a navigation light may go out.
The typical navigational lights:
SidelightsSternlightMasthead lampoverall white lightingSidelights: Because they are visible to other vessels approaching from the side or head-on, these red and green lights are sometimes known as combo lights. The port (left) and starboard (right) sides of a ship are indicated by the red and green lights, respectively.
sternlight: Only from behind or almost behind the ship can one see the sternlight.
To know more about navigation light refer to: https://brainly.com/question/3465458
#SPJ4
HELP PLEASE!!
identify health-related problems related to an unhealthy body composition.
( I didn't know what subject to put this as, sorry )
Some health-related problems that are related to unhealthy body composition are:
Type 2 DiabetesHigh blood pressureStrokeApneaWhat is a Health Problem?This refers to the complications that a person has when his health system does not function optimally.
Hence, we can see that based on the fact that the body needs to have a healthy body composition such as a good Body Mass Index when this becomes unbalanced, it can bring the above health problems.
Read more about health problems here:
https://brainly.com/question/1382377
#SPJ1
A rock in space travels in the x direction with a speed of 6 m/s and collides with an identical rock at rest. After the collision, the first rock is traveling at 4 m/s at an angle of 60 degrees with respect to the x axis. What is the speed of the second rock after the collision, in m/s
The speed of the second rock after the collision is 4.15m/s
Given the direction of rock in space is x , the direction with speed is 6m/s
After the collision the speed of the first rock is at 4 m/s
The angle given is 60 degrees with respect to x - axis
We need to calculate the speed of the second rock after the collision is
We know that
[tex]m_1=m_2[/tex]
[tex]v_1 = 6m/s\\v_2 = 4m/s[/tex]
θ = 60°
We need to find [tex]v_x[/tex] and [tex]v_y[/tex]
Therefore ,
[tex]m_1v_1= m_2v_2cos60+m_2v_2\\[/tex]
So, 6 = 4 cos 60° + [tex]v_2[/tex]
[tex]v_x = 6-4cos60\\v_x = 2m/s[/tex]
The same way we will find the momentum for [tex]v_y[/tex]
The total momentum is 0
0+0 = [tex]m_1(4)sin60 + m_2v_y[/tex]
[tex]v_y = -3.64 m/s[/tex]
Now ,
V (resultant) = [tex]\sqrt{(v_x)^{2} + (v_y)^2} \\v = \sqrt{(2)^2+(-3.64)^2} \\v = 4.15 m/s[/tex]
Hence the speed of the second rock after the collision, in m/s is 4.15m/s
Learn more about Collision here
https://brainly.com/question/7538238
#SPJ4
YALL PLEASE HELP QUICK!!!!!!!11!!!1!!1
4.16 Lab Report
Motion and Forces
Introduction
1. What was the purpose of the experiment?
2. What were the independent, dependent, and control variables in your investigation? Describe the variables for each part of the experiment.
3. Write a hypothesis based on observations and scientific principles.
Experimental Methods
1. What tools did you use to collect your data?
2. Write your procedure. List each step so that another student could follow the procedure and repeat your experiment.
Data and Observations
1. Record your observations.
Conclusions
1. What conclusions can you draw about how the sum of forces acting on an object affect its motion? Write an evidence-based claim.
2. Which mass, A, B, or C, was the greatest? Use the observations from your experiment and your knowledge of Newton’s laws of motion to write an evidence-based claim.
The purpose of the experiment is to describe how the plasma membrane contributes to how the cell functions.
How to explain the experiment?The dependent variable is the variable bring investigated. In this case, the dependent variable is the egg circumference.
The independent variable is the variable controlled by the researcher.
The controlled variable has no influence on the results. An example is the concentration of vinegar.
A hypothesis is a proposition which can be tested by observations. In order to form a hypothesis, it's important to collect observations about the problem being examined.
The tools that can be used to collect data include observations and records taken.
The procedure to collect the data include:
Determine the information be collected.Set a timeline for the collection of data.Determine the method to utilize for data collection.Analyze the data.Implement the findings.The conclusions that can be drawn about how the sum of forces acting on an object affect its motion is that when the forces cancel out, then the resultant force will be zero, if not, the unbalanced force will result in the acceleration of the object.
Learn more about experiments on:
brainly.com/question/17274244
#SPJ1
A light bulb receives 100 J of energy electrically. It transfers 30 J of energy to the surroundings by heat. What is the efficiency of the light bulb?
Answer:
The efficiency of the light bulb is 30%.
Explanation:
Efficiency = output/input × 100%
Data
Energy input = 100J
Energy output = 30J
Efficiency = ?
Efficiency = Energy output/Energy input × 100%
Efficiency = 30J/100J × 100%
Efficiency = 0.3 × 100%
Efficiency = 30%
Therefore the efficiency of the light bulb is 30%.
A type of electromagnetic radiation that has a higher frequency than visible light is Question 15 options: ultraviolet infrared radiowaves microwaves two of the above
Ultraviolet rays are Electromagnetic waves that have higher frequencies than visible light, so they carry more energy.
What are Ultraviolet rays?Johann Wilhelm Ritter, a German physicist, first noticed that paper soaked in silver chloride browned more quickly when exposed to Ultraviolet rays than when it was exposed to violet light itself in 1801.For the most part, humans cannot see ultraviolet rays. The cornea filters out shorter wavelengths, while the lens of the human eye primarily inhibits radiation in the 300–400 nm range. Additionally, UV color receptor adaptations are not present in humans. The retina's photoreceptors are sensitive to near-UV, though, and those without lenses (a condition known as aphakia) see near-UV as whitish-blue or whitish-violet.The body produces vitamin D, which is necessary for life when exposed to UV light, more especially UVB. UV rays are necessary for humans to maintain proper vitamin levels.To learn more about Electromagnetic waves refer to:
https://brainly.com/question/12692206
#SPJ4
If the current through a resistor is tripled, how does the power dissipated by
the resistor change?
If the current that is circuit is tripled, the power is increased by a factor of 9. Option D
What is power?The term power refers to the rate of doing work. Now if we have to obtain the work done by the use of the formula; P = I^2R
Now if the current that is circuit is tripled, the power is now obtained by;
P = (3I)^2R = 9I^2R hence the power is increased by a factor of 9.
Learn more about power in a circuit:https://brainly.com/question/2933971
#SPJ1
How much heat is needed to change the temperature of 3 grams of gold (c = 0.129 joules over grams times degrees celsius) from 21°c to 363°c? the answer is expressed to the nearest whole number. 121 joules 132 joules 140 joules 149 joules
The heat needed is 132J
Given the mass of the gold m = 3 gram.
The initial temperature of the gold T = 21 degree celsius.
The final temperature of the gold T' = 363 degree celsius.
Hence, the change in temperature dT = T' - T
= 363 - 21 degree celsius
= 342 degree celsius.
The specific heat of the gold is given as c = 0.129 J/g°C
We are asked to calculate the heat required ( dQ ) to raise the temperature of gold.
The heat required for this is calculated as
dQ = mcDT
dQ = 3 × 342 × 0.129 J
dQ = 132.354 J ≈ 132 J
Hence, the Heat needed is 132 J.
Learn more about Specific heat Here
https://brainly.com/question/21406849
#SPJ4
Answer: B (132 joules)
Explanation: