You are driving along the New York State Thruway in a line of cars all travelling at a constant speed of 108.5 km/hr. The car in front of you applies its brakes for maximum acceleration. You then apply your brakes to achieve the same maximum acceleration after only a 1 s delay due to reaction time. What distance behind the car in front of you must you be to avoid a collision?

Answers

Answer 1

Answer:

Car first should be 30.13 m behind the second car.

Explanation:

Given that,

Constant speed = 108.5 Km/hr

Time = 1 sec

Let the distance covered by second car S and by first car S'

We need to calculate the distance covered by second car

Using equation of motion

[tex]S=ut-\dfrac{1}{2}at^2[/tex].....(I)

The distance covered by first car to avoid collision

[tex]S''=S'+S[/tex]

Put the value into the formula

[tex]S'+S=ut+ut-\dfrac{1}{2}at^2[/tex]...(II)

We need to calculate the distance covered by first car

Using equation (I) and (II)

[tex]S'=ut[/tex]

Put the value into the formula

[tex]S'=108.5\times\dfrac{5}{18}\times1[/tex]

[tex]S'=30.13\ m[/tex]

Hence, Car first should be 30.13 m behind the second car.


Related Questions

If a car is driving at 10 m/s and is driving for 2 minutes, what is the total distance it will
cover?

Answers

Distance = (speed) x (time)

Distance = (10 meter/second) x (2 minutes)

Distance = (10 meter/second) x (2 minutes) x (60 second/minute)

Distance = (10 x 2 x 60) (meter-minute-second / second-minute)

Distance = 1,200 meters

The pilot of a helicopter drops a lead brick from a height of 500 m. (assume no air resistance and g~10 m/s2) roles Evalu How long does it take to reach the ground?

Answers

Answer:

The  value  is  [tex]t = 10 \  s[/tex]

Explanation:

From the question we are told that

  The  height is  [tex]h = 500 \ m[/tex]

  The acceleration is  [tex]g =  10 \  m/s[/tex]

 

Generally from the second equation of motion we have that

    [tex]h  =  ut  +  \frac{1}{2} a t^2[/tex]

Here  the initial velocity u =  0  m/s  given that the stone started from rest

       So

            [tex]500 =  0 (t) +0.5 *  (10) t^2[/tex]

=>         [tex]t = 10 \  s[/tex]

A wire carries a steady current of 2A.the Charge that passes a cross Section in 2s is

Answers

Answer :

◈ Electric current :

Electric current is defined as the rate of charge flow. (per unit time)

I = Q/t

I denotes current

Q denotes charge

t denotes time

Given : I = 2A and t = 2s

To Find : Charge flow in wire (Q)

[tex]:\implies\sf\:I=\dfrac{Q}{t}[/tex]

[tex]:\implies\sf\:2=\dfrac{Q}{2}[/tex]

[tex]:\implies\:\boxed{\bf{\red{Q=4\:C}}}[/tex]

A flow of electrical charge carriers, generally electrons or electron-deficient atoms, is referred to as current.  The charge that will be in the wire is 4 C.

What is current?

A flow of electrical charge carriers, generally electrons or electron-deficient atoms, is referred to as current. The capital letter I is a typical sign for current. The ampere, abbreviated as A, is the standard unit.

As it is given to us that the current in the wire is 2A, while the time for which the current flows through the wire is 2 seconds.

[tex]\rm I=\dfrac Qt[/tex]

Substitute the value we will get,

[tex]\rm 2\ A = \dfrac{Q}{2\ sec}\\\\Q = 4\ C[/tex]

Thus, the charge that will be in the wire is 4 C.

Learn more about Current:

https://brainly.com/question/13076734

True or False: If a point charge has electric field lines that point into it, the charge must be positive.

Answers

Answer:

False

Explanation:

If a point charge has electric field lines point into it,then charge must be negative because electric lines point into negative charges and point out of positive charges

The second law of thermodynamics leads us to conclude what?
a. the total energy of the universe is constant
b. disorder in the universe is increasing with the passage of time
c. it is theoretically impossible to convert work into heat with 100% efficiency
d. the total energy in the universe is increasing with time
e. the total energy in the universe is decreasing with time

Answers

Answer:

b. disorder in the universe is increasing with the passage of time

Explanation:

The second law of thermodynamics states that the total entropy of an isolated system  increases over time . The entropy of a system measures the randomness or disorder  in the system . So the we can state,  in terms of disorder , the second  law of thermodynamics as follows .

The disorder in the universe is increasing with the passage of time .

The second law of thermodynamics leads us to conclude that disorder in the universe is increasing with the passage of time. So, here, option b is the correct option.

Entropy is a measure of the disorder or randomness in a system. The second law of thermodynamics states that in any spontaneous process, the total entropy of an isolated system (including both the system and its surroundings) tends to increase or, at best, remain constant. This means that over time, natural processes tend to lead to an increase in the overall disorder or randomness of the system. It's important to note that while the increase in entropy is a statistical tendency on a macroscopic scale, there can still be localized decreases in entropy within a system. 

Learn more about the law of thermodynamics here.

https://brainly.com/question/17405303

#SPJ6

Caroline, a piano tuner, suspects that a piano's B4 key is out of tune. Normally, she would play the key along with her B4 tuning fork and tune the piano to match, but her B4 tuning fork is missing! Instead, she plays the errant key along with her A4 tuning fork (which has a frequency of 440.0 Hz), displays the resulting waveform on a handheld oscilloscope, and measures a beat frequency of 15.9 Hz. Then, she plays the errant key along with her C5 tuning fork (which has a frequency of 523.3 Hz) and measures a beat frequency of 67.4 Hz. What frequency is being played by the out-of-tune key? If the B4 key is supposed to produce a frequency of 493.9, is the frequency of the key lower than it should be ("flat") or higher than it should be ("sharp")?

Answers

Answer:

455.9 Hz, Flat

Explanation:

The beat frequency is basically the difference between the frequency of the B4 note and the frequency of the A4 tuning fork. This means the B4 note is 15.9 Hz off of 440Hz, and 67.4 Hz off of 525.3 Hz. As B4 is between the two notes, it would make sense to find its frequency by adding 15.9 to 440 and subtracting 67.4 from 523.3, both if which give us a frequency 455.9 Hz for the B4 key. This is because the note doesn't change for the different turning forks so both differences should result in the same frequency. Because the note should be 493.9 frequency but instead has a frequency of 455.9 Hz, it is flat because the frequency is lower than it is supposed to be.

Hope this helped!

This question deals with the phenomenon of "Beat Frequency".

The frequency being played by the B4 key is "455.9 Hz", which is "lower (flat) than it should be".

When two waves with a slightly different frequency interfere with each other, they produce a pattern known as beat frequency. The beat frequency is the difference between the frequencies of the interfering wave. Since the frequency of B4 key produces beat frequency with both the C5 tuning fork (which has a frequency of 523.3 Hz) and the A4 (which has a frequency of 440 Hz). Hence, the frequency of the B4 key must be between the range of these frequencies, that is, 440 Hz to 523.3 Hz.

ANALYZING THE BEAT FREQUENCY WITH A4 TUNING FORK:

Beat Frequency with A4 tuning fork = Frequency of B4 - Frequency of A4

Frequency of B4 = Frequency of A4 + Beat Frequency with A4 tuning fork

Frequency of B4 = 440 Hz + 15.9 Hz

Frequency of B4 = 455.9 Hz

ANALYZING THE BEAT FREQUENCY WITH C5 TUNING FORK:

Beat Frequency with C5 tuning fork = Frequency of C5 - Frequency of C5

Frequency of B4 = Frequency of C5 - Beat Frequency with C5 tuning fork

Frequency of B4 = 440 Hz - 67.4 Hz

Frequency of B4 = 455.9 Hz

Both the answers validate each other.

Since the expected frequency of the B4 key is 493.9 Hz, which is greater than the actual frequency produced by the B4 key. Hence, we can say that "the frequency of the key lower than it should be ("flat")"

The attached picture shows the general formula of the beat frequency.

Learn more about beat frequency here:

https://brainly.com/question/10703578?referrer=searchResults

A car moves in a straight line at a speed of 72.1 km/h.
How far (in km) will the car move in 7.74 minutes at this speed?

Answers

Speed=distance/time.

7.74mins=464.4secs.

72.1=distance/464.4.

distance=464.4×7.21.

=3348.324m.

What must the charge (sign and magnitude) of a particle of mass 1.50 gg be for it to remain stationary when placed in a downward-directed electric field of magnitude 670 N/CN/C ?

Answers

Answer:

q = -2.19 x 10⁻⁵ C

Explanation:

Given;

mass of the particle, m = 1.5 g = 0.0015 kg

magnitude of electric field, E = 670 N/C

Electric field is given by;

[tex]E = \frac{F}{q}[/tex]

where;

q is the magnitude of the

f is the force of the charge

f = mg

[tex]E = \frac{F}{q}\\\\E = \frac{mg}{q}\\\\q = \frac{mg}{E}\\\\q = \frac{0.0015*9.8}{670} \\\\q = 2.19*10^{-5} \ C[/tex]

Since the electric field is acting downward, the force on the charge must be acting upward. Therefore, the charge must be negative

q = -2.19 x 10⁻⁵ C

A boy throws a ball on a spring scales which oscillates about the equilibrium position with a period of T = 0.5 sec. The amplitude of the vibration is A = 2 cm. Assume the ball does not bounce from the scales’s surface afterwards. Assume the vibration of the scale is expressed mathematically as x(t) = Acos(t + ). Find:

Answers

Complete Question

A boy throws a ball on a spring scales which oscillates about the equilibrium position with a period of T = 0.5 sec. The amplitude of the vibration is A = 2 cm. Assume the ball does not bounce from the scales’s surface afterwards. Assume the vibration of the scale is expressed mathematically as x(t) = Acos(t + ). Find:

a) frequency

b) the maximum acceleration

c) the maximum velocity

Answer:

a

[tex]f =  2  \ Hz[/tex]

b

[tex]a_{max} =  3.2 \ m/s^2[/tex]

c

[tex]v_{max} =  0.25 \  m/s[/tex]

Explanation:

From the question we are told that

   The period is  [tex]T  =  0.5 \ sec[/tex]

    The  amplitude is  [tex]A =  2 \ cm  =  0.02 \ m[/tex]

    The  vibration of the scale is  [tex]Acos(wt +  \phi )[/tex]

Generally the frequency is mathematically represented as

   [tex]f =  \frac{1}{T}[/tex]

=>   [tex]f =  \frac{1}{0.5}[/tex]

=>    [tex]f =  2  \ Hz[/tex]

The  maximum acceleration is mathematically represented as

    [tex]a_{max} =  A *(2 \pi f)^2[/tex]

=>    [tex]0.02 *  (2 * 3.142  *  2)^2[/tex]

=>  [tex]a_{max} =  3.2 \ m/s^2[/tex]

The  maximum velocity is mathematically represented as  

     [tex]v_{max} =  A *  (2 \pi f)[/tex]

=>    [tex]v_{max} =  0.02 *  (2 * 3.142 *  2)[/tex]

=>    [tex]v_{max} =  0.25 \  m/s[/tex]

Calculate the change in momentum of a 0.5kg ball that strikes the floor at 15 m/s and bounces back up at 12 m/s

Answers

Answer:

The change in momentum is:  [tex]13.5\,\frac{kg\,m}{s}[/tex]

Explanation:

Let's define that vectors pointing up are positive, and vectors pointing down negative.

Then we express the initial momentum of the ball as the product of its mass times the velocity, and include the negative sign since this momentum is pointing down (velocity vector is pointing down):

[tex]P_i=-0.5\,(15) \frac{kg\,m}{s} =-7.5\, \frac{kg\,m}{s}[/tex]

the final momentum is positive (pointing up) and given by the product:

[tex]P_f=0.5\,(12) \frac{kg\,m}{s} =6\, \frac{kg\,m}{s}[/tex]

Therefore, since the change in momentum is defined as the difference between the final momentum minus the initial one, we get:

[tex]P_f-P_i=6-(-7.5)\,\frac{kg\,m}{s} =13.5\,\frac{kg\,m}{s}[/tex]

Which of the following describes how the mechanical advantage of a simple machine affects the amount of force needed for work? A. By decreasing the distance over which the input force is applied, less force is needed to do the same amount of work. B. By increasing the distance over which the input force is applied, more force is needed to do the same amount of work. C. By decreasing the distance over which the input force is applied, more force is needed to do the same amount of work. D. By increasing the distance over which the input force is applied, less force is needed to do the same amount of work.

Answers

Answer:

The answer is a

Explanation:

A particle is moving along the x-axis. Its position as a function of time is given as x=bt-ct^2a) What must be the units of the constants b and c, if x is in meters and t in seconds?b) At time zero, the particle is at the origin. At what later time t does it pass the origin again?c) Derive an expression for the x-component of velocity.d) At what time t is the particle momentarily at rest?e) Derive an expression for the x-component of the particles acceleration, ax

Answers

Answer:

We are given x= bt +ct²

So

A. bxt= m

Because m/s*s= m

So b= m/s and c= m/s²

B.

x= bt-ct²

So at x=0 t=0

x=0 t= 2

We have

bt = ct² so t = b/c at x= 0

So b-2ct= 0

B. To find velocity we use

dx / dt = b - 2 Ct

C. At rest wen V= 0

We have t= b/2c

D. To find acceleration we use

dv / dt = - 2C

When We are given x= bt +ct²

Then A. bx.t = mJust Because of the  m/s*s= mSo that,  b= m/s and c= m/s²Now B. x= bt-ct²the So at x=0 t=0After that x=0 t= 2Now We have bt = ct² so t = b/c at x= 0After that So b-2ct= 0Then B. To find velocity we use that isThen dx / dt = b - 2 CtThen C. At rest wen V= 0We have t= b/2cNow D. To find acceleration we useNow the answer is dv / dt = - 2C

Learn more about:

https://brainly.com/question/14805815

The standard deviation of Eric’s data is 0.8°C. Martha conducted the same experiment. Her average temperature was 35.1 with a standard deviation of 1.2°C. Her data are more precise than Eric's

Answers

Answer:

less precise than

Explanation:

Answer:

less precise than

Explanation:

its right on edge2020

If three resistors 2ohm, 3ohm and 4ohm are connected in a circuit. Calculate the equivalent resistance of the combination

Answers

You haven't described whether they're connected in series or in parallel.  Actually, there are eight (8) different ways they can be arranged, and each way has a different equivalent resistance.

==> All 3 resistors in series.  Equivalent resistance = (2+3+4) = 9.000 ohms

==> All 3 resistors in parallel.

Equivalent resistance = 1 / (1/2 + 1/3 + 1/4) = (12/13) ohm or 0.923 ohm

==> The 2 ohm resistor in series with (the 3 and the 4 in parallel)

Equivalent resistance = 2 + 1/(1/3 + 1/4) =  3.714 ohms

==> The 3 ohm resistor in series with (the 2 and the 4 in parallel)

Equivalent resistance = 3 + 1/(1/2 + 1/4) =  4.333 ohms  

==> The 4 ohm resistor in series with (the 2 and the 3 in parallel)

Equivalent resistance = 4 + 1/(1/2 + 1/3) =  5.200 ohms

==> The 2 ohm resistor in parallel with (the 3 and the 4 in series)

Equivalent resistance = 1.556 ohms

==> The 3 ohm resistor in parallel with (the 2 and the 4 in series)

Equivalent resistance = 2.000 ohms

==> The 4 ohm resistor in parallel with (the 2 and the 3 in series)

Equivalent resistance = 2.222 ohms

Enter the following expression in the answer box below: 2gλ3m−−−−√, where λ is the lowercase Greek letter lambda.

Answers

Answer:

  [tex]\sqrt{\dfrac{2g\lambda^3}{m}}[/tex]

Explanation:

We can write the expression here, but the point of the problem seems to be to see if you can manipulate the controls on the answer box to reproduce that expression.

  [tex]\boxed{\sqrt{\dfrac{2g\lambda^3}{m}}}[/tex]

Public television station KQED in San Francisco broadcasts a sinusoidal radio signal at a power of 777 kW. Assume that the wave spreads out uniformly into a hemisphere above the ground.
A) At a home 5.50km away from the antenna, what average pressure does this wave exert on a totally reflecting surface? answer in PA units
B) At a home 5.50km away from the antenna, what are the amplitudes of the electric and magnetic fields of the wave? answer in N/C, T
C) At a home 5.50km away from the antenna, what is the average density of the energy this wave carries? answer in J/m^3
D) For the energy density in part (c), what percentage is due to the electric field?
E) For the energy density in part (c), what percentage is due to the magnetic field?

Answers

Answer:

A. Using

I= P/ A

So = P/ 2π R²

So=777E3 watt/ 2*πx (²5.5E3m)

4.3*10^ -3W/m²

So pressure= 2I/c

=2* 4.3*10^ -3W/m²/ 3*10^ 8

2.7*10^-11p.a

B.

Using Emax= √2I/Eoc

So

√ 2*4.3*10^-3/8.8E-12*3*10^8

= 5.48V/m

So

Bmax= Emax/c

5.58/3E8

= 1.83*10-9T

D.average density is given by

= Eo(Emax/√2)²

= 8.85E-12(5.48/√2)²

1.3*10^10W/m²

A 2250 kg truck has a velocity of 25 m/s to the east. What is the momentum of the truck? p = mv

Answers

Momentum, p=mass* velocity
P=2250(25)
p=56250 kgm/s

Hope this can help.

The momentum of the truck is "56250 kgm/s".

According to the question,

Mass,

m = 2250 kg

Velocity,

v = 25 m/s

As we know,

→ [tex]p = mv[/tex]

By putting the values, we get

→    [tex]= 2250\times 25[/tex]

→    [tex]= 56250 \ kgm/s[/tex]

Thus the answer is right.

Learn more:

https://brainly.com/question/21433514

Which is NOT one of the 11 organ systems of the body?
Integumentary system
Immune system
Skeletal system
Digestive system

Answers

Answer:

Immune

Explanation:

because I remember taking that test and I I specifically remember that question and that's the answer

A baseball is thrown from the outfield toward the catcher. When the ball reaches its highest point, which statement is true? (A) Its velocity is not zero, but its acceleration is zero. (B) Its velocity and its acceleration are both zero. (C) Its velocity is perpendicular to its acceleration. (D) Its acceleration depends on the angle at which the ball was thrown. (E) None of the above statements are true.

Answers

Answer:

C. Its velocity is perpendicular to its acceleration

Explanation:

Because acceleration is always perpendicular to the velocity when the velocity will change direction without change it's magnitude

Challenge Problem
5.
A man is standing on the top of a hill and sees a flagpole he knows is 45 feet high. The angle of
depression to the bottom of the pole is 12 degrees, and the angle of elevation to the top of the
pole is 16 degrees. Find his distance from the pole.

Answers

Answer: his distance from the pole is 90.16 ft

Explanation:

based on the diagram of the question i will upload along this answer;

45 - d is equal to part of the pole below the horizontal line

d/x = tan(16) ; x = d/tan(16)............equ1

(45-d) / x = tan(12); x = (45-d) / tan(12)-----------equ2

∴ d/tan(16) = (45-d) / tan(12)

d.tan(12) = (45-d).tan(16)  

d.tan12 = (45×tan16) - d.tan16

0.2125d = 12.9034 - 0.2867d

0.2125d + 0.2867d = 12.9034

0.4992d = 12.9034

d = 12.9034/0.4992

d = 25.85 ft

now substitute value of d into any of our previous equation, lets take equation 1

x = 25.85 / tan(16)

x = 25.85 / 0.2867

x = 90.16 ft

Therefore his distance from the pole is 90.16 ft

A communications satellite orbiting the earth has solar panels that completely absorb all sunlight incident upon them. The total area A of the panels is 10m2.
1) The intensity of the sun's radiation incident upon the earth is about I = 1.4kW/m2. Suppose this is the value for the intensity of sunlight incident upon the satellite's solar panels. What is the total solar power P absorbed by the panels?
2) What is the total force F on the panels exerted by radiation pressure from the sunlight?

Answers

Answer:

0.00004666N

Explanation:

We know that

intensity (I) = P/ A

Where

P= power

A= Area

So lets say that the power absorbed

Will be = Intensity x Area

Which Is = 1.4 x 10^3 x(10)

So

14000 Watt = 14 kWatt

However we know that radiation pressure is equal to

time-averaged intensity all over the speed of light in free space

So

P = (1.4 x 1000)/c

But

F= P x A

So

((1.4 x 1000)/(3 x1 0^8)) x 10

Which is

=0.000046666N

Explanation:

A speeder passes a parked police car with a speed of 65 km/h in a 50km/h zone. One second after the speeder has passed the police car, the police begin his pursuit. The police car accelerates with constant acceleration of 2m/s^2.Required:a. How long does it take for the police to catch the speeding car? b. How far did the police car travel before police caught up with the speeder? c. What is the speed of the police car when catches up with the speeder?

Answers

Answer:

a) The police will take 18.056 seconds to catch the speedy car, b) The police will travel 326.019 meters before catching the speedy car, c) The speed of the police car when catches up with the speeder is 36.112 meters per second.

Explanation:

Let suppose that speeder moves in a uniform motion, whereas police car has an uniformly accelerated motion.

a) How long does it take for the police to catch the speeding car:

Kinematic equation of each vehicle's position are described:

Speeder

[tex]s_{A} = s_{A,o}+v_{A}\cdot t[/tex]

Police Car

[tex]s_{B} = s_{B,o}+v_{B,o}\cdot t + \frac{1}{2}\cdot a_{B}\cdot t^{2}[/tex]

If [tex]s_{A} = s_{B}[/tex], [tex]s_{A,o} = s_{B,o}[/tex], [tex]v_{A} = 18.056\,\frac{m}{s}[/tex], [tex]v_{B,o} = 0\,\frac{m}{s}[/tex] and [tex]a_{B} = 2\,\frac{m}{s^{2}}[/tex], the resulting expression is done:

[tex]v_{A} \cdot t = v_{B,o}\cdot t +\frac{1}{2}\cdot a_{B}\cdot t^{2}[/tex]

[tex]\frac{1}{2}\cdot a_{B}\cdot t^{2}+(v_{B,o}-v_{A})\cdot t = 0[/tex]

[tex]t \cdot \left(\frac{1}{2}\cdot a_{B}\cdot t +v_{B,o}-v_{A} \right)= 0[/tex]

[tex]t = 0\,s\,\wedge\, t = \frac{2\cdot (v_{A}-v_{B,o})}{a_{B}}[/tex]

[tex]t = \frac{2\cdot \left(18.056\,\frac{m}{s}-0\,\frac{m}{s} \right)}{2\,\frac{m}{s^{2}} }[/tex]

[tex]t = 18.056\,s[/tex]

The police will take 18.056 seconds to catch the speedy car.

b) How far did the police car travel before police caught up with the speeder?

The distance travelled by the police is: ([tex]s_{B,o} = 0\,m[/tex],  [tex]a_{B} = 2\,\frac{m}{s^{2}}[/tex], [tex]v_{B,o} = 0\,\frac{m}{s}[/tex] and  [tex]t = 18.056\,s[/tex])

[tex]s_{B} = 0\,m + \left(0\,\frac{m}{s} \right)\cdot (18.056\,s)+\frac{1}{2}\cdot \left(2\,\frac{m}{s^{2}} \right) \cdot (18.056\,s)^{2}[/tex]

[tex]s_{B} = 326.019\,m[/tex]

The police will travel 326.019 meters before catching the speedy car.

c) What is the speed of the police car when catches up with the speeder?

The speed of the police car is represented by the following formula:

[tex]v_{B} = v_{B,o} + a_{B}\cdot t[/tex]

Where [tex]v_{B}[/tex] is the speed of the police car, measured in meters per second.

Given that [tex]v_{B,o} = 0\,\frac{m}{s}[/tex], [tex]t = 18.056\,s[/tex] and [tex]a_{B} = 2\,\frac{m}{s^{2}}[/tex], the final speed of the police car when catches up with the speeder is:

[tex]v_{B} = 0\,\frac{m}{s}+\left(2\,\frac{m}{s^{2}} \right)\cdot (18.056\,s)[/tex]

[tex]v_{B} = 36.112\,\frac{m}{s}[/tex]

The speed of the police car when catches up with the speeder is 36.112 meters per second.

explain how ozone in the atmosphere affects visible light on earth

Answers

Ozone gas in the upper atmosphere absorbs most of the ultraviolet radiation of wavelengths shorter than about 0.25 µm. This is actually a positive thing for us and most other living things, because of the harmful nature of ultraviolet radiation below these wavelengths. The ozone layer is a natural layer of gas in the upper atmosphere that protects humans and other living things from harmful ultraviolet (UV) radiation from the sun.

Which of the following are properties of a conductor in electrostatic equilibrium? The force on a charge near the conductor is zero. Electric field lines just outside the conductor are perpendicular to the surface. All net charge in the conductor is on the surface. The electric field inside the conductor is zero.

Answers

Answer:

The electric field inside the conductor is zero.

Explanation:

In electrostatic equilibrium charges are assumed to be in rest. Therefore no current.

I = 0

From the ohm's law

ΔV= IR = 0

⇒ΔV =0

Therefore, potential V is same through the conductor.

Also, E = -ΔV d = 0

Hence, The electric field inside the conductor is zero.

A projectile is launched at some angle to the horizontal with some initial speed vi, and air resistance is negligible.(a) Is the projectile a freely falling body? (b) What is its acceleration in the vertical direction? (c) What is its acceleration in the horizontal direction?

Answers

Answer:

Explanation:

When a projectile is launched at some angle to the horizontal with some speed vi , and air resistance is negligible , it is definitely a freely falling body .

It is so because it is free to accelerate towards the earth with acceleration of g . Air has no resistance , hence no force is acting on it except the gravitational force . Hence it is a freely falling body .

b )

The acceleration in the vertical direction is due to force exerted by the earth that is gravitational force on it  . Hence its  acceleration is equal to g in vertically downward direction .

c )

It has zero acceleration in horizontal direction . It is so because no force is acting on it in horizontal direction . So no acceleration will be present in horizontal direction . It will move in horizontal direction with constant speed of vi cos θ where θ is the angle vi make with the horizontal .

If A= +4j - 2i - 3k and C= -4i -2j - 3k , which of the following numbers is closest to the magnitude of A-C ?

Answers

The magnitude of Dot product of two vectors is 3.

Given vectors are,

     [tex]A= 4j - 2i - 3k[/tex]  and [tex]C= -4i -2j - 3k[/tex]

The dot product two vectors shown below,

        [tex]A\cdot C=(-4*4)+(-2*-2)+(-3*-3)\\\\A\cdot C=-16+4+9\\\\A\cdot C=-16+13=-3[/tex]

Thus,  The magnitude of Dot product of two vectors is 3.

Find out more information about the Dot product here :

https://brainly.com/question/9956772

A toy car that is 0.12 m long is used to model the actions of an actual car that
is 6 m long. Which ratio shows the relationship between the sizes of the
model and the actual car?
A: 5:1
B: 1:50
C: 50:1
D: 1:5

Answers

Answer:

it is B 1:50

Explanation:

just did it on apex

What does the statement "all motion is relative"
mean?

Answers

The statement that motion is relative is an important concept in physics. The meaning behind this statement is that the motion of an object is relative to either the frame of reference of the observer, or to another distinct frame of reference.

You travel down the highway at a steady rate of 75 mph (33.53 m/s)  for a total of 25 minutes, calculate how far you traveled in meters

Answers

Answer:

50280 meters

Explanation:

33.52 meters/seconds is 2011.2 meters/minutes (multiply by 60)

2011.2 meters/m * 25 minutes = answer

Which is the least dense liquid?

Answers

Answer:

lamp oil.

Explanation: the ping pong ball doesnt sink through the lamp oil.

Other Questions
Which accomplishments are most associated with the Gupta Empire?defeat of the Chinese Empires and the adoption of Zoroastrianismdevelopments in astronomy and of the concept of zeroestablish of peace with China and the spread of Islamadoption of democracy and the creation of the Silk Road why is water considered to be polar molecule Can anybody help with these two problems for me please this for algebra finding slope what claim is the author making about the importance of stage 2 sleep? Please solve! 50 points En la biblioteca(library), los amigos ____.a.estudianc.comenb.bailand.all of the aboveABCD Each day, track and monitor your workout for a minimum of 30 minutes each day (min 2-3 days per week). Various workouts and exercises include:Mile run/bike ridePushups/SitupsBody Squats/lower body exercises (if you have weights, you may use those)Write a summary detailing and explaining what your workout was and how it helped your overall mental and physical health during these troubling times. You may include, calories burned, distance walked or ran. What lifts and other exercises you may have completed that were not listed above. PLZ HELP ASPP WILL MARK UOU AS BRAINLIST What molecule is produced as a byproduct when two or more monosaccharides are combined together? If ABD and CBD are a linear pair, mABD = (3x+31), mCBD = (2x-6), then find mABD. * Referencing Microsoft Word:1. How can you save a document created using Word 2016 in a PDF format? Explain the process step by step.2. Assuming you are on the home tab, explain which tabs and buttons you would need to select to open a new blank document?3. Assuming you are on the home tab, explain which tabs and buttons you would need to select to add the "Quick Print" icon to the Quick Access Toolbar.4. Assuming you are on the home tab, explain which tabs and buttons you would need to select to add a bibliography to the document.5. Assuming you are on the home tab, explain which tabs and buttons you would need to select to put a picture within your document?6. Assuming you are on the home tab, explain which tabs and buttons you would need to select to change the page orientation to Landscape?7. What is the purpose of the "ribbon"?8. The Help button from previous versions of Office has been replaced by what words and what symbol? describe the following conditions: diuresis, glycosuria and polyuria When Emmett began his science experiment, he has 20 millimeters of an unknown solution. During the experiment, the change in the volume of the solution was -9 milliliters. What was his final volume of the solution. To solve the problem, dakota added 20+( -9 ) and came up with an answer of -11 milliliters. Is Dakota correct? Why or why not ? A : yes, dakota is correctB: No. The answer should have been 11 milliliters, not -11 milliliters, because the volume should not be negative C: No. Dakota should have subtracted 20 - (-9) because the volume decreased The assets and liabilities of Amos Moving Services at March 31, 2011, the end of the current year, and its revenue and expenses for the year are listed below. The capital of the owner was $180,000 at April 1, 2010, the beginning of the current year. Mr. Amos invested an additional $25,000 in the business during the year. Accounts Payable $1,200 Miscellaneous Expense $230 Accounts Receivable $10,340 Office Expense $1,240 Cash $32,320 Supplies $1,670 Fees Earned $84,350 Wages Expense $23,550 Land $47,000 Amos, Drawing $16,570 Building $155,960Prepare an income statement for the current year ended May 31, 2011.Fees Earned credit 84350Expenses: ? ? ?Total Expenses ?net income or net loss ?? Incomplete manufacturing costs, expenses, and selling data for two different cases are as follows.Incomplete manufacturing costs, expenses, and sellIncomplete manufacturing costs, expenses, and sell Collapse question part(a) Indicate the missing amount for each letter.Case 1 2Direct materials used $9,600 $Direct labor 5,000 8,000 Manufacturing overhead 8,000 4,000 Total manufacturing costs 16,000 Beginning work in process 1,000 inventoryEnding work in process inventory 3,000 Sales revenue 24,500 Sales discounts 2,500 1,400 Cost of goods manufactured 17,000 22,000 Beginning finished goods inventory 3,300 Goods available for sale 20,000 Cost of goods sold Ending finished goods inventory 3,400 2,500 Gross profit 7,000 Operating expenses 2,500 Net income 5,000b) Prepare a condensed cost of goods manaufactures schdule ffor Case1c1) Prepare an Income statement for Case 1c2) Prepare the current assets section of the balance sheet for Case1. Assume that in Case 1 the other items in the current assets section are as follows: Cash $4,000, Receivables (net) $15,000, Raw Materials $600 and Prepaid Expenses $400. A car dealership sold 36 cars in April. The dealership wants to increase the number of cars sold by 40% in May. How many cars will the dealership need to sell to reach their goal? Which phases does water go through if you use distillation to separate it from dissolved sugar? Which processes form glaciers QUESTION 10The stoppers were weighed directly on the balance, but liquids and powders cannot be. Explain why the usethe tare button would be especially useful for liquids and powdered substances. Simplify 7 to the power of 6 7 to the power of 5.