The line of code that imports the csv file is df = DataFrame(CSV.File("data.csv"))
How to determine the line of code?From the question, the file name is:
data.csv
The syntax that imports the file as a julia dataframe is:
df = DataFrame(CSV.File("file-name"))
Since the filename is data.csv, the code becomes
df = DataFrame(CSV.File("data.csv"))
Hence, the line of code that imports the csv file is df = DataFrame(CSV.File("data.csv"))
Read more about data frame at:
https://brainly.com/question/28016629
#SPJ1
Write an expression that executes the loop body as long as the user enters a non-negative number.
Note: If the submitted code has an infinite loop, the system will stop running the code after a few seconds and report "Program end never reached." The system doesn't print the test case that caused the reported message.
Sample outputs with inputs: 9 5 2 -1
Body
Body
Body
Done.
Preferred in Python
user_num = int(input())
while ''' Your solution goes here ''':
print('Body')
user_num = int(input())
print('Done.')
Answer:
user_num = 9
while user_num > -1:
print("Body")
user_num = int(input())
print("Done")
If this answer helped consider rating and marking brainliest :)
Answer:
user_num >= 0 or 0 <= user_num
Explanation:
You want to use one of the comparison operators, to solve this problem, and in this case you're going to specifically use: >= or <=, which is "greater than or equal to" and "less than or equal to", either can be used, it just depends where you place the numbers, kind of like how 10 >= 3 and 3 <= 10 are both true.
So in this case it says "non negative" number, this means that the number is greater than or equal to 0, The reason the equal to is included is because 0 is not negative. this means that you want to include it as well. So don't do user_num > 0, since that would exclude 0, which is not negative. So you're solution for the while loop will be:
while user_num >= 0:
# code
or you can do
while 0 <= user_num:
# code
Although I would probably go with user_num >= 0, since it seems to be the most understandable at a glance, although both should work.
Answer first before explanation please
Which of the following scenarios reflect the atomicity
property?
A) 1. A transaction has completed executing.
2: The changes are saved to volatile memory.
3. The changes are then saved to non-volatile
memory.
B) 1. The product quantity starts at 200.
2. Transaction 1 runs to read the quantity of the
product to be updated.
3. Transaction 2 attempts to read the quantity of
the same product.
4. Transaction 2 has to wait until transaction 1 is
complete.
5. Transaction 1 updates the product quantity to
reduce it by 100.
6. Transaction 2 is now able to read the quantity
to be updated.
7. Transaction 2 updates the product quantity to
reduce it by 5.
8. The product quantity ends at 95.
C) 1. The newsletter column can only accept Y or N
as options.
2. The user tries to attempt to enter in Maybe.
3. The transaction is denied.
D) 1. A transaction has two SQL requests.
2. Both successfully complete.
3. The data is then committed.
D) Transaction has two SQL requests, both successfully complete, the data is then committed.
Explanation: Atomicity requires that all SQL requests in a transaction should be fully completed and if not, the entire transaction should be aborted. The transaction should be viewed as a single logical unit of work that is indivisible.
A transaction has two SQL requests both successfully completed and then the data is committed. Option (d) is correct.
What do you mean by Transaction?An executed contract between a buyer and a seller to trade goods, services, or financial assets in exchange for money is known as a transaction. The phrase is also frequently used in business accounting.
Atomicity mandates that each SQL request inside a transaction be fully finished; otherwise, the transaction must be canceled. The transaction should be seen as a single, indivisible logical unit of work.
A database's atomicity assures that it adheres to the all or nothing principle. In other words, the database views each transaction as a single, complete entity. As a result, when a database processes a transaction, it either executes it in full or not at all.
Therefore, Option (d) is correct. A transaction has two SQL requests both successfully completed and then the data is committed.
Learn more about Transaction, here;
https://brainly.com/question/24730931
#SPJ2
Follow the instructions for starting C++ and viewing the Introductory21.cpp file, which is contained in either the Cpp8\Chap11\Introductory21 Project folder or the Cpp8\Chap11 folder. (Depending on your C++ development tool, you may need to open the project/solution file first.) The program should calculate the average stock price stored in the prices array. It then should display the average price on the screen. Complete the program using the for statement. Save and then run the program.
Explanation:
I would use a for loop cycling through the array and adding the arrays values into a variable, then keep track of how many items in the array you have. Finally divide the total by the amount of stock prices and output it.
question in file i need this work done tonight
enter formula that uses the IF function to test whether the number of years of experience (cell M5) is greater than or equal to 4
Answer:
if n mod cell m5 >=4 then
and continue your programming
The formula that uses the IF function to test is:
IF(M5 >= 4, "Qualified", "Not Qualified")
In Excel, use the IF function to test whether the number of years of experience (cell M5) is greater than or equal to 4.
The formula would be:
=IF(M5 >= 4, "Qualified", "Not Qualified")
This formula will check if the value in cell M5 is greater than or equal to 4. If it is, the result will be "Qualified".
Otherwise, if it's less than 4, the result will be "Not Qualified".
Learn more about Excel here:
https://brainly.com/question/33209328
#SPJ3
What three files do you need to perform a mail merge?
HELP ASAP PLEASE!!
The 3 files you need to have for a successful mail merge are:
An Excel spreadsheet worksOutlook Contact List. Apple Contacts List or Text file, etc.What is Mail Merge?This is known to be the act of carrying out a Mail Merge and it is one where a person will need to use a Word document and a recipient list, that is an Excel workbook.
Files needed are:
Text file,address files, etc.The 3 files you need to have for a successful mail merge are:
An Excel spreadsheet worksOutlook Contact List.Apple Contacts List or Text file, etc.
Learn more about mail merge from
https://brainly.com/question/20904639
#SPJ1
Look at the logic program below. Set a breakpoint after each commented instruction. You can also single step through the program. Answer the questions in the program.
.data
sourceword:
.word 0xAB
wordmask:
.word 0xCF
operand:
.long 0xAA
.text
.globl _start
_start:
movw sourceword, %ax
movw %ax, %bx
xorw %cx, %cx
# What's in ax?
# What's in bx?
# What's in cx?
andw wordmask, %ax
# What's in ax?
orw wordmask, %bx
# What's in bx?
xorw wordmask, %cx
# What's in cx?
movl operand, %eax
movl %eax, %ebx
movl %eax, %ecx
# What's in eax?
# What's in ebx?
# What's in ecx?
shll $3,%eax
# What's in eax?
rorl $4,%ebx
# What's in ebx?
sarl %ecx
# Now what's in ecx?
done:
Using programming knowledge, it is possible to use programming logic, we can differentiate and find the terms
Writing the code and understanding the programming logic:.data
sourceword:
.word 0xAB
wordmask:
.word 0xCF
operand:
.long 0xAA
.text
.globl _start
_start:
movw sourceword, %ax # ax=0x00AB ( move the word value of sourceword =0x00AB to ax register.)
movw %ax, %bx # bx=0x00AB ( copy the value of ax to bx register.)
xorw %cx, %cx # cx=0000 ( cx=cx XOR cx, that is clear cx register.)
andw wordmask, %ax # ax=0x008B ( ax=ax AND wordmask= 0x00AB AND 0x00CF= 0x008B)
orw wordmask, %bx # bx=0x00EF (bx=bx OR wordmask= 0x00AB OR 0x00CF= 0x00EF.)
xorw wordmask, %cx # cx=0x00CF (cx=cx XOR wordmask= 0x0000 XOR 0x00CF=0x00CF.)
movl operand, %eax # eax=0x000000AA. ( copy the 32-bit value of operand=0x000000AA to eax.)
movl %eax, %ebx # ebx=0x000000AA.( copy the value of eax to ebx.)
movl %eax, %ecx # ecx=0x000000AA. ( copy the value of eax to ecx.)
shll $3,%eax # eax=0x00000550. ( logical shift left of eax=0x000000AA by 3 bits.)
# 0x000000AA=00000000000000000000000010101010
# =>00000000000000000000010101010000=0x00000550.
rorl $4,%ebx # ebx=0xA000000A. (Rotate right ebx=0x000000AA by 4 bits.)
# 0x000000AA=00000000000000000000000010101010
3 =>10100000000000000000000000001010= 0xA000000A.
sarl %ecx # here the count value to shift the bits not mentioned.
# It is the arithmetic shift right instruction. the shifted left bits filled with MSB bit.
See more about logic program at brainly.com/question/14970713
#SPJ1
briefly explain how human thinking is mapped to artificial intelligence components
Mind mapping is a method that uses visual representations of concepts and details to make material simpler to recall is the human thinking is mapped to artificial intelligence components
What is artificial intelligence?The replication of human intelligence functions by machines, particularly computer systems, is referred to as "artificial intelligence." Expert systems, speech recognition, machine vision, and natural language processing are also included.
Thus, Mind mapping is a method that uses visual representations
For more details about artificial intelligence, click here:
https://brainly.com/question/22678576
#SPJ1
import java.io.InputStream;
import java.io.StringReader;
import java.util.Scanner;
public class Main {
public void(String[] args) throws IOException, InterruptedException { Scanner scanner = new Scanner(System.in);
System.out.print("Enter the first name of a contributor: ");
final String firstName = scanner.nextLine(); System.out.println("The maximum contribution received was " + firstName + ".");
System.out.println("The minimum contribution received was " + firstName + ".");
System.out.println("The average contribution amount was " + firstName + ".");
System.out.println("A total of $" + (Integer)contributions * 1000 * 1000 * 1000 * 1000 * 1000 * 1000 * 1000 * 1000 * 1000 * 1000 * 1); } }
The error in the code is that "." was not declared as a variable.
What is Debugging?This refers to the finding of errors in a code to help it to execute properly through either omission or addition of code.
Hence, we can see that the given code has the error of not declaring the "." as a variable and it is used in the print statement to make computations and this would result in an error code.
Read more about java programming here:
https://brainly.com/question/26642771
#SPJ1
In cell E5, enter a formula without using functions that multiples the actual hours (cell D5) by the billing rate (cell J2) to determine the actual dollar amount charged for general administrative services. Include an absolute reference to cell J2 in the formula.
In cell E5, enter a formula without using functions that multiples the actual hours (cell D5) by the billing rate (cell J2) to determine the actual dollar amount charged for general administrative services are L formulation are expressions used to orm computation.
What is excel?
Microsoft Excel allows customers to format, arrange and calculate statistics in a spreadsheet. By organizing statistics the use of software programs like Excel, statistics analysts and different customers could make facts less difficult to view as statistics is brought or changed. Excel includes a huge wide variety of bins referred to as cells which might be ordered in rows and columns.
From the question, we have:Cell D5 represents the real hoursCell J2 represents the billing feeThe made from the real hours and the billing fee is represented as follows: D5 J2Cell J2 is to be referenced the usage of absolute reference;So, we rewrite the above components as follows: D5 * $J$2Excel formulation start with same signSo, we rewrite the above components as follows: D5 * $J$2This method that, the components to go into in mobileular E5 is:=D5^ * $J$2.
Read extra approximately Excel formulation at:
https://brainly.com/question/14820723
We're given the training set data with the following values for variable X1:
X1 Feature Values
6
7
12
-5
We chose to perform scaling Using t-distribution standardization.
Which of the following answers is true, regarding the values of the feature after scaling?
Remark: a 2-digit accuracy after the decimal point is sufficient.
Select the best answer
Select one:
A.
The value of the feature of the third example after scaling is about 0.6
B.
The value of the feature of the third example after scaling is about 1.33
C.
The value of the feature of the third example after scaling is about 1.67
D.
The value of the feature of the third example after scaling is about 0.97
The option that is true, regarding the values of the feature after scaling is that The value of the feature of the third example after scaling is about 0.6.
What is standard t-distribution?The t-distribution is one that the standardized distances of sample mean implies to the population mean if the population standard deviation is said to be unknown, and the observations is originated from a normally distributed population.
Note that The option that is true, regarding the values of the feature after scaling is that The value of the feature of the third example after scaling is about 0.6.
Learn more about t-distribution standardization from
https://brainly.com/question/24277447
#SPJ1
1. Create a program that determines and displays the number of unique characters in a string entered by a user. for example , Hello, World! has 10 unique characters while zzz has only 1 unique character. solve this problem
The given code that would determine and displays the number of unique characters in a string entered by a user.
def main():
#We create a dict but leave it blank for now
letterDict = {}
text = input("Enter a text string: ")
for c in text:
#We don't want to count non alphabetic characters
if c.isalpha():
#We don't need to count how many times we have seen this item so just store any
#value using the current character as a key
letterDict[c] = 1
#Now len(letterDict) will return the number of items in the dict and that is also
#the number of unique characters
print("The number of unique characters in that string = ", len(letterDict))
if __name__ == '__main__':
main()
Read more about programs here:
https://brainly.com/question/23275071
#SPJ1
Identify the correctly constructed ALTER TABLE statement to add a UNIQUE constraint to the column user_number with the constraint name user_number_unique on the table called 'user'.
ALTER TABLE user ADD CONSTRAINT user_number_unique UNIQUE (user_number);
Common mistakes with adding the UNIQUE constraint to an existing column include not having ( ) around the column names, omitting the keyword UNIQUE, incorrectly spelling the column name, and not including the constraint name.
Explain the different hardware used by local network
The different hardware used by local network are:
Routers hubsswitchesbridges, etc.What is the role of the hardware?The hardware are tools that aids in the act of connecting a computer or device to any form of local area network (LAN).
Note that hardware components needed also are:
A network interface card (NIC) A wireless network interface controller (WNIC) A transmission medium , wired or wireless.Learn more about local network from
https://brainly.com/question/1167985
#SPJ1
Write the pseudocode for a program that merges the two files into one file containing a list of all students in the district, maintaining student ID number order
The Pseudocode for a program that performs the above function is given below.
What is a pseudocode?Pseudocode is a fictitious and informal language that aids programmers in the development of algorithms.
Pseudocode is a detailed (algorithmic) design tool that is "text-based."
Pseudocode sample:
start
Declarations
InputFile customerData
OutputFile mailingLabels
string studentid
string firstName
string LastName
string streetAddress
housekeeping( )
while bothDone = "N"
mainLoop( )
endwhile
finishUp( )
stop
housekeeping( )
open customerData "VernonHillsMailOrderBoxes.txt"
open mailingLabels "CutomerMailingLabels.txt"
Jefferson( )
Audubon( )
if jeffId = 9999 then
if audId = 9999 then
bothDone = "Y"
endif
endif
return
Jefferson( )
if eof then
jeffId = 9999
endif
return
Audubon( )
if eof then
audId = 9999
endif
return
mainLoop( )
if jeffId > audId then
Audubon( )
else
Jefferson( )
endif
if jeffId = 9999 then
if audId = 9999 then
bothDone = "Y"
endif
endif
return
finishUp( )
close files
return
Learn more about pseudocode at;
https://brainly.com/question/24953880
#SPJ1
if you get a messge online saying you just won a game you just need to give ame email address and phone number to have it shipped what should you do
Answer:
block the number and cancel all notifications form that scammerrr
Explanation:
Select the option no explanation needed
Based on the above, the option that i will chose is option A.
What is arithmetic coding?Arithmetic coding is known to be a form of a kind of entropy encoding that is known to often make use of lossless data compression.
Note that based on the image given, the option that i will chose is option A as it is the best option that fit into the expression,
Learn more about Arithmetic from
https://brainly.com/question/6561461
#SPJ1
class Login: def __init__(self): self.login_name = 'none' self.login_password = 'none' # TODO: Define class method - check_credentials(self, user_login, user_passwd) if __name__ == "__main__": login = Login() timeout = 5 #variable used for login attempts login = input() password = input() # TODO: Create boolean variable that receives return value from # calling check_credentials(login, password) # TODO: Create a loop that will continue until login attempts run out or a successful login is returned # TODO: Create a loop that only allows 5 failed login attempts
Create boolean variable that receives return value from # calling check_credentials(login, password) # TODO a loop that will continue until login attempts run out or a successful login is returned # TODO #elegance Login elegance Login: #_init def _init_(self) #initializing login_name as none self.login_name = 'none'.
What is a code in programming?In laptop programming, laptop code refers back to the set of instructions, or a device of rules, written in a specific programming language (i.e., the supply code). It is likewise the time period used for the supply code after it's been processed via way of means of a compiler and made equipped to run at the laptop (i.e., the item code).
CODE#elegance Loginelegance Login: #_init_ def _init_(self): #initializing login_name as none self.login_name = 'none' #initializing login_password as none self.login_password = 'none' #check_credentials() def check_credentials(self, user_login, user_passwd): #initializing simlogin as 'Test' simlogin = 'Test' #initializing simpass as 'Test' simpass = 'test1234' #if consumer despatched an appropriate credentials if user_login == simlogin and user_passwd == simpass: #print "Successful login!" print("Successful login!") #returns False go back False #returns False go back False #timeout variable used for login attempts timeout = five #spark off for password password = input() #if now no longer legitimate login else: #decrements timeout timeout = timeout - 1 #if timeout equals 0 if timeout == 0: #prints "five failed login attempts. No extra login attempts." print("five failed login attempts. No extra login attempts.") #exits the loop break #spark off for consumer call login = input()Read more about the code:
https://brainly.com/question/4514135
#SPJ1
9. Changing from a bystander to an advocate requires
A. a large social media following.
B. a high-speed Internet connection.
C. bravery.
D. piracy.
Below functions flatten the nested list of integers (List[List[int]]) into a single list and remove duplicates by leaving only the first occurrences. When the total number of elements is N, choose the one that correctly compares the time complexity with respect to N of each function.
f1 = f3 < f2
f1 = f2 < f3
f3 < f1 = f2
f3 < f1 < f2
f1 = f2 = f3
If the the total number of elements is N, the option that correctly compares the time complexity with respect to N of each function is f3 < f1 < f2.
What does it mean to flatten a list?Flattening lists is a term that connote the act of changing a multidimensional or any kind of nested list into what we call a one-dimensional list.
Note that For example, the act of changing this list of [[1,2], [3,4]] list to [1,2,3,4] is known as flattening.
So, If the the total number of elements is N, the option that correctly compares the time complexity with respect to N of each function is f3 < f1 < f2.
Learn more about computer coding from
https://brainly.com/question/23275071
#SPJ1
write the function and syntax of the following QBASIC statement.
i. INPUT
i. PRINT
The the function and syntax of the INPUT and PRINT command is written below.
What is the syntax of INPUT statement?The syntax is known to be:
INPUT #file_stream, variable1 ; variable2$ ' where a lot of variables can be taken.
What is the syntax of print statement in QBasic?First. write all about the program that is ("PRINT "Hello World") into any text editor or a QBasic IDE and then save it with the term "1HELLO. BAS" and then open the file in QBasic and click on F5.
What is the function of print command in QBasic?PRINT statement givens one the output on the screen as it is known to prints the values of the expression.
What is the function of input command?The INPUT command is said to be used to put together input from any given user.
Learn more about INPUT command from
https://brainly.com/question/23338965
#SPJ1
Give a real-world example of a selection control structure.
An example of selection structure is when a group of people wanted to know the exact number of days through the use of a data set that has the daily high temperature which ranges from above 80 degrees, and as such, a programmer can use the if-end statement.
What is an if statement?An IF statement is known to be a kind of statement that is executed due to the happening of a specific condition.
Note that IF statements must start with IF and end with the END.
Therefore, An example of selection structure is when a group of people wanted to know the exact number of days through the use of a data set that has the daily high temperature which ranges from above 80 degrees, and as such, a programmer can use the if-end statement.
Learn more about if-end statement from
https://brainly.com/question/18736215
#SPJ1
Pick the 3 correct Python functions that parse and output only the date and time part of each log in log.txt as follows.
parse1
parse2
parse3
parse4
parse5
Answer:
1, 4, 5
Explanation:
parse2:
. In this case it's passing "r" as an argument, which really does absolutely nothing, because whenever you call open("file.txt") it defaults to reading mode, so all you're doing is explicitly passing the "r". So let's look at the first line. Whenever you call str.split() without any arguments, by default it splits it by empty text, and filters any empty text. So str.split() is not the same as str.split(" ") although it has similar behavior. " ".split(" ") will output ['', '', '', '', '', ''], while " ".split() will output []. So in this case the line.split() will split the string '10.1.2.1 - car [01/Mar/2022:13:05:05 +0900] "GET /python HTTP/1.0" 200 2222' into the list ['10.1.2.1', '-', 'car', '[01/Mar/2022:13:05:05', '+0900]', '"GET', '/python', 'HTTP/1.0"', '200', '2222']. As you can see the the data is split into two pieces of text, AND they include the brackets in both strings. So when it gets the 3 index and strips it of the "[]" it will have the incomplete date
parse3:
In this instance the "r" does nothing as mentioned before the "r" is already defaulted whenever you call open("file.txt") so open("file.txt") is the same as open("file.txt", "r"). So in this case we won't be working left to right, we're going inside the brackets first, kind of like in math you don't don't work left to right in equation 3 + 3(2+3). You work in the brackets first (inside brackets you do left to right). So the first piece of code to run is the line.split("[" or "]"). I actually kind of misspoke here. Technically the "[" or "]" runs first because this doesn't do what you may think it does. The or will only return one value. this is not splitting the line by both "[" and "]". The, or will evaluate which is true from left to right, and if it is true, it returns that. Since strings are evaluated on their length to determine if they're true. the "[" will evaluate to true, because any string that is not empty is true, if a string is empty it's false. So the "[" will evaluate to true this the "[" or "]" will evaluate to "[". So after that the code will run line.split("[") which makes the list: ['10.1.2.1 - car ', '01/Mar/2022:13:05:05 +0900] "GET /python HTTP/1.0" 200 2222']. Now the [3:5] will splice the list so that it returns a list with the elements at index 3 (including 3) to 5 (excluding 5). This returns the list: [], because the previous list only has 2 elements. There are no elements at index 3 to 5 (excluding 5). So when you join the list by " ", you'll get an empty string
parse4:
So I'm actually a bit confused here, I thought the "r+" would open the file in read-writing mode, but maybe this is a different version of python I have no idea, so I'm going to assume it is reading/writing mode, which just means you can read and write to the file. Anyways when you split the line by doing line.split(), as mentioned before it will split by empty spaces and filter any empty spaces. This line will return: ['10.1.2.1', '-', 'car', '[01/Mar/2022:13:05:05', '+0900]', '"GET', '/python', 'HTTP/1.0"', '200', '2222']. and then you splice the list from indexes 3 to 5 (excluding 5). This will return the list: ['[01/Mar/2022:13:05:05', '+0900]'] which has the two pieces of information you need for the date. Now it joins them by a space which will output: '[01/Mar/2022:13:05:05 +0900]'. Now when you strip the "[]" you get the string: '01/Mar/2022:13:05:05 +0900' which is the correct output!
parse 5:
So in this example it's using re.split. And the re.split is splitting by "[" or "]" which is what re.split can be used for, to split by multiple strings, which may be confused by string.split("[" or "]") which is not the same thing as explained above what the latter does. Also the reason there is a backslash in front of the [ and ] is to escape it, because normally those two characters would be used to define a set, but by using a \ in front of it, you're essentially telling regex to interpret it literally. So in splitting the string by "[" and "]" you'll get the list: ['10.1.2.1 - car ', '01/Mar/2022:13:05:05 +0900', ' "GET /python HTTP/1.0" 200 2222'] which has 3 elements, since it was split by the [ and the ]. The second element has the date, so all you need to do is index the list using the index 1, which is exactly what the code does
Which of the following are the primary components used in machine learning? (Select Multiple Boxes)
A) A machine learning model
B) A model training algorithm
C) A model inference algorithm
D) A model integrity
E) A preparation algorith
The option that are the primary components used in machine learning are:
Option A) A machine learning model.Option B) A model training algorithm.Option C) A model inference algorithm.What are the primary element used in machine learning?The elements used in machine learning algorithm are::
Representation as it deals with how the model looks like.Evaluation deals with good models differentiation and evaluation.Optimization deals with looking for good models.Note that The option that are the primary components used in machine learning are:
Option A) A machine learning model.Option B) A model training algorithm.Option C) A model inference algorithm.Learn more about machine learning from
https://brainly.com/question/25523571
#SPJ1
Which is a valid I
P address?
Answer:
2001:0db8:85a3:0000:0000:8a2e:0370:7334" and "2001:db8:85a3:0:0:8A2E:0370:7334" are valid IPv6 addresses, while "2001:0db8:85a3::8A2E:037j:7334
Explanation:
An information system will be developed to keep track of a utility company's assets, such as buildings, vehicles, and equipment. As new asset information becomes available, staff working in the field can update it using mobile devices. This system should integrate several existing asset databases that the company has. Based on the generic information system architecture shown in Figure 6.18 of the recommended key text, page 187, create a layered architecture for this asset management system.
The four standard layers of a layered architecture are:
presentation, business, persistence, database.What is a Layered Architecture?This refers to the architectural style that is used to show components with similar functions in horizontal layers that have specific roles.
Hence, we can see that no generic info system architecture was attached to the answer, so it would be impossible to create a layered architecture, so a general overview was given about layered architecture.
Read more about layered architecture here:
https://brainly.com/question/2563702
#SPJ1
What can quantum computers do more efficiently than regular computers?
Answer:
QC process the same information in quantum bits or qubits which are 1s and 0s. qubits have a third state called “superposition” that allows them to represent a one or a zero at the same time
For Example, Factoring / Multiplying two large numbers is easy for any computer. But calculating the factors of a very large (say, 200-digit) number, on the other hand, is considered impossible for any PC. While Quantum Computers can perform the same task in few seconds.
A customer uses an app to order pizza for delivery. Which component includes
aspects of the customer's interaction with an enterprise platform?
~frestoripongetosarangeou
A consumer orders pizza for delivery via an app. The element of the data component covers how a customer interacts with an enterprise platform
What is the data component?A data component is a tool that provides information on the activities taking place on a certain enterprise platform. This application also aids in keeping track of the available inventory.
In this approach, customers place their orders through a smartphone app.
Therefore, while ordering pizza the consumer uses the data component.
To know more about the Data component, visit the link below:
https://brainly.com/question/27976243
#SPJ2
PLease don't copy I need new code
c++
The acronym for a given string is formed by combining the first letters from a series of words, as in this example: "self contained underwater breathing apparatus" ==> "SCUBA".
Your program generates and displays the acronyms for each of the strings in a data file named “acronym.dat”.
The output of your program should be of the following format:
Self contained underwater breathing apparatus ==> SCUBA
White anglo saxon protestant ==> WASP
……
North Atlantic Treaty Organization ==> NATO
The strings in the data file may have mixed upper and lower letters. You may assume that no hyphen and underscore, and no punctuation marks is present in the data file. The acronyms generated should all be in upper case letters. Your program output should have the exact format as shown above.
You are required to write a value-returning function to convert one line of characters into its corresponding acronym. This function needs to be called within a loop that reads lines of characters from the data file one line at a time, and performs the acronym conversion.
acrynom.data
Self contained underwater breathing apparatus
White anglo saxon protestant
North Atlantic Treaty Organization
Defense Advanced Research Projects Agency
Laugh Out Loud
By the way
Best Friends Forever
I Love You
In my humble opinion
Oh my god
Wicked Evil Grin
Wish you were here
National Science Foundation
National Institute Health
#include
using namespace std;
int main() {
return 0;
}
describe/define each variable used in that module. Variable names must be descriptive. Separate variable definitions from variable descriptions. Use the following form for this description: variable declared; // variable description in English sentence(s)
Properly indent all code according to descriptions given in “Indent C Programs” (http://www.cs.arizona.edu/~mccann/indent_c.html). You must be consistent in the number of spaces used for indentation.
• To improve readability, use a moderate amount of white space, i.e., insert blank lines between blocks of code, and between different modules/functions.
• Comments need to be written for each logically related block of code. This include a while or for loop, a if decision statement, a switch statement, a group of statements that compute a value, a block of code that read in user data, a group of statements that displays output, etc.
4. For each user defined function, comments need to be written above the function describing:
o What does this function do?
o What are the expected input values?
o What are the expected return values?
Using knowledge of computational language in C++ it is possible to write a function that "self contained underwater breathing apparatus"SCUBA". In this program generates and displays the acronyms for each of the strings in a data file named.
Writting in C++#include<iostream>
#include<fstream>
#include<string>
using namespace std;
// Your program is required to have at least one user-define function.
// This function takes one string as input and returns the acronym corresponding to that string.
string getAcronym(string str){
string message = "";
if(str[0]>='a' && str[0]<='z')
message += str[0]-32;
else
message = str[0];
for(int i=1; i<str.length()-1; i++)
{
if(str[i-1]==' '){
if(str[i]>='a' && str[i]<='z')
message += str[i]-32;
else
message += str[i];
}
}
return message;
}
// Write a C++ program named acronym.cc
int main(){
// Your program generates and displays the acronyms for each of the strings in a data file named
See more about C++ at brainly.com/question/19705654
#SPJ1
How would it be feasible to combine both formats in a single disk?
It be feasible to combine both formats in a single disk are Field \lenght should be placed after the information saved withinside the area to expose in which it ends.
What is fixed-length area and variable length?Fixed-length method having a fixed length that by no means varies. In database systems, an area will have a hard and fast or a variable period. A variable-period area is one whose period may be special in every document, relying on what information is saved withinside the are.
You should determine what number of characters it is able to contain. If a area is of the variable period then an End-Of-Field marker should be placed after the information is saved withinside the area to expose in which it ends. If a document incorporates a few fields that have variable lengths then the document period can be variable.it's miles feasible to mix each constant period and variable period on a single disk.Read more about the single disk:
https://brainly.com/question/11600913
#SPJ1