Answer:
boiling point
Explanation:
In the case of boiling point, the presence of solute particles in a solution causes the boiling point of the solution to be higher than that of the pure solvent. This is because the solute particles interfere with the movement of the solvent molecules, making it more difficult for them to escape from the surface of the solution and enter the gas phase.
an automobile with 0.370-m radius tires travels 80,000 km before the tires need to be replaced. how many revolutions do the tires make in this lifetime? neglect any change in radius due to wear.
An automobile having tires with a 0.370-m radius may drive 80,000 km before needing new tires. The tires' total amount of revolutions over their lifetime is 3x10^7
Given that radius of tire = 0.370m
Distance the tire travels (s) = 80000km = 8 x 10^7 m
the number of rotations of the tire is = n
We know that circumference of tire = 2r = 1 revolution or rotation of tire
circumference = 2x3.14x0.370 = 2.32m per revolution
Number of revolutions made = total distance / distance travelled in 1 revolution
n = 8 x 10^7/2.32 = 3.44 x 10^7
Hence number of revolutions made by the tire = 3 x 10^7
To learn more about distance click here https://brainly.com/question/29678788
#SPJ4
A rocket burns fuel at a rate of 269 kg/s and
exhausts the gas at a relative speed of 3 km/s.
Find the thrust of the rocket.
Answer in units of MN.
The thrust of the rocket is 0.807 MN.
What is the thrust of the rocket?
The thrust of the rocket is calculated by applying Newton's second law of motion as shown below.
F = ma
where;
a is the acceleration of the rocketm is the mass of the rocketF = m (v/t)
F = m (x/t²)
F = ( m/t) (x / t)
F = ( m/t ) ( v )
where;
m/t is the mass flow rate of the rocketv is the speed of the rocketF = ( 269 kg/s ) ( 3,000 m/s )
F = 807,000 N
F = 0.807 MN
Learn more about thrust here: https://brainly.com/question/28807314
#SPJ1
what do the sublevel designations s, p, d, and f specify with respect to the atom's orbitals?
In particles, electrons circle in shells comparing to principle quantum number n. In expanding request of n, the shells are named K, L, M, N, O, P, ...
For a shell of guideline quantum number n, there are subshells comparing to orbital quantum numbers (lowercase L) l = 0, 1, 2, ... , n - 1. Their names are s,p,d,f,... in expanding request of l.
Besides, for every l, there are 2l+ 1 potential attractive quantum numbers ml = 0, ±1, ±2, ... , ±l.
Each state (n,l,[tex]m_l[/tex]) can be involved by up to 2 electrons greatest, which should have opposite spins (Pauli Exclusion Principle).
Likewise, there is a documentation called spectral notation for electron configuration. I'm certain you have seen it.
It is a succession of one metal more orbitals with their electron includes in the structure
[shell number][subshell name][tex]^[number of electrons][/tex]
Model, [tex]1s^22s^22p^6[/tex] for Neon implies 2 electrons in subshell s of the n=1 shell, 2 electrons in subshell s of the n=2 shell, and 6 electrons in subshell p of the n=2 shell. The just subshell for n=1 and both subshells for n=2 are completely filled and no electrons possess n>2 here, accordingly making Neon inert (Noble gas).
To know more about electron configuration click on below link:
https://brainly.com/question/29757010#
#SPJ4
What is the kinetic energy of a ball with a mass of 0. 5 kg and a velocity of 10 m/s? (formula:)25 j5 j50 j100 j.
The object weighs 0.5 kg and moves at a pace of 10 meters per second. So: KE = (1/2)(0.5)(10)^2. As a result, the ball has a kinetic energy of 25 J.
In science, what is an energy?Energy is characterized as having the "ability to accomplish work, which is the capacity to apply a force sufficient to move an object." Despite this unclear definition, the concept is actually quite straightforward: energy is just the force that moves objects. Potential and kinetic energy are the two different categories.
What makes energy crucial?Modern medical technology, transportation, communications, computers, and many other things are all powered by energy. Energy security and affordability are more fundamental needs in developing countries.
To know more about Energy visit:
https://brainly.com/question/11399976
#SPJ4
Water flowing through an 8-cm-diameter pipe enters a porous section, as in fig. P3. 10, which allows a uniform radial velocity vw through the wall surfaces for a distance of 1. 2 m. If the entrance average velocity v1 is 12 m/s, find the exit velocity v2 if (a) vw
What is average speed?
Average velocity is outlined because the amendment in position or displacement (∆x) divided by the time intervals (∆t) within which the displacement occurs.
The average velocity will be positive or negative relying upon the sign of the displacement. The SI unit of average velocity is meters per second (m/s or ms-1).
For a suction velocity of Vw = 0.15 m/s
Cylindrical suction expanse.
Aw = 2π (0.04) (1.2) = 0.30 lbm2
Q1 = Qw+Q1
(12* π * (0.08)2 / 4 = (0.15)(0.30) + V2 π
(0.08)2 / 4
V2 = 3 m/s
Hence, the exit velocity is Vw = 0.15 m/s
To know more about average velocity please visit
https://brainly.com/question/862972
#SPJ4
the plates of an isolated parallel plate capacitor with a capacitance c carry a charge q. what is the capacitance of the capacitor if the charge is increased to 2q?
The plates' exact charges are Q, -Q. The charge that is acquired by the plate when a parallel plate capacitor of capacitor C is connected across a battery of potential difference V will be equal to Q = CV.
The entire charge is stored on both plates of a perfect capacitor. The potential difference V between the two plates is proportional to the charge Q on the plates. Q = CV, C = Q/V, and capacitance C are proportional constants. When one plate's area doubles while the area of the other plate is cut in half, the electrical capacitance is cut in half because the effective area is less. Where A is the area of the plate and d is the separation distance, capacitance C = oA/d.
Learn more about capacitance here-
https://brainly.com/question/14746225
#SPJ4
a loaded grocery cart is rolling across a parking lot in a strong wind. you apply a constant force f
The digits on the left side of the number 3 remain the same when it is less than 5, however the digits on the right side of the number 3 and 3 are replaced by zero. done work=-180 J
We are informed that
Constant force = F = (33 N)i - (41 N) j
Displacement=s=(-9.4m)i-(3.1m)j
We must locate the completed work.
Done work = F.s.
Using the equation
Working = (33i-41j).
(-9.4i-3.1j)
Work completed: 33. (-9.4)
i+41j.3.1j
Making use of the rules i.i=j.j=k.k=1, i.j=j.k=k.i=i.k=k.j=j.i=0, and
Finished work: -310.1+127.1
Finished work: 183.1 J
Answers must be written with two significant figures.
The digits on the left side of 3 remain the same when the unit's digit 3 is less than 5, however the digits on the right side of 3 and 3 will be replaced by 0.
done work=-180 J
To know more about Work done visit:
https://brainly.com/question/13662169
#SPJ4
FILL IN THE BLANK. according to the first law of thermodynamics, the total amount of energy in the universe _______.
According to the first law of thermodynamics, the total amount of energy in the universe constant .
The First Law of Thermodynamics is a thermodynamic adaptation of the Law of Conservation of Energy. "The total energy in a system remains constant, even when it may be transformed from one form to another," is a straightforward expression. "Energy cannot be created or destroyed" is another frequently used phrase (in a "closed system"). This is the fundamental tenet of the First Law, while there are numerous nuances and consequences that might be better expressed in more intricate forms.
It distinguishes between heat and thermodynamic work as two different types of energy transmission for a system with a constant amount of matter. The law also specifies a system's internal energy, a broad attribute for accounting for the balance of energies.
To know more about thermodynamics
https://brainly.com/question/16984216
#SPJ4
if a 5 mhz sound wave is traveling in fat, air, muscle, and bone, which medium will have the shortest wavelength?
The medium with the shortest wavelength, if a 5 MHz sound wave is going through fat, air, muscle, and bone, is air.
The slowest sound speed is in air. The density and elasticity of the medium through which sound travels affects its speed. In general, sound travels more quickly through solids than through gases and liquids. The faster sound travels through a medium, the more elastic and less dense it is. Solid objects transmit sound the fastest. This is because sound waves can travel faster than through a solid medium through a liquid or gas because its molecules are so close together. In actuality, sound waves move over 17 times more quickly in steel than air. So as speed increases wavelength increases. Hence the speed of sound in air is lowest compare to other mediums. Therefore the air will have shortest wavelength of sound.
To learn more about sound waves click here https://brainly.com/question/11797560
#SPJ4
a convex lens has a focal length fff . an object is placed at a distance between fff and 2 fff on a line perpendicular to the center of the lens. the image formed is located at what distance from the lens?
The image will be formed beyond 2f if the object has been kept between f and 2f in a convex lens.
Any converging lens is referred to as a convex lens.
A lens that converges light rays that are moving parallel to its main axis is known as a converging lens or convex lens.
The distance between a lens's center and its focus is known as the focal length, or f, of a lens.
When an item is positioned along a line perpendicular to the center of the lens, between infinity and twice the object's distance from the focal point,
The image will be situated between the focal point, f, and twice the focal point's distance, 2f.
Consequently, for an object positioned along a line perpendicular to the center of the lens between infinity and 2f.
The image created by a convex lens when an item is positioned between F and 2F is magnified, real, inverted, and beyond 2F.
To read more about the convex lens, visit https://brainly.com/question/1604692
#SPJ4
Joe pushes down the length of the handle of a 12.9 kg lawn spreader. The handle makes an angle of 41.7◦ with the horizontal. Joe wishes to accelerate the spreader from rest to 1.39 m/s in 1.7 s. What force must Joe apply to the handle? Answer in units of N.
Answer:
Below
Explanation:
Only the HORIZONTAL force , F cos 41.7 moves the spreader forward
The acceleration = change in V / change in t = 1.39/1.7 = .818 m/s^2
F = m * a
F cos 41.7 = 12.9 * .818 shows F = 14.12 N
what principle is described by the distribution of objects in a visual field that connects the different parts of a whole work? space balance movement symmetry
In interior design, balance refers to the appropriate placement of elements in a space to produce aesthetic harmony.
Balance refers to how objects, colors, textures, and space are distributed visually. These components should be balanced to create a design that feels stable, as if the design were a scale. Balance refers to the idea of visual equilibrium and has to do with our feeling of balance on a physical level. Visual stability is the consequence of balancing conflicting forces in a composition. The majority of well-balanced compositions do so either symmetrically or asymmetrically. Equal weights on equal sides of a composition, balanced around an axis or fulcrum in the middle, are indicative of symmetrical equilibrium. Symmetrical balance inspires feelings of formality and elegance (it's also known as formal balance).
Learn more about stability here-
https://brainly.com/question/13751780
#SPJ4
a grandfather clock is running slow. the period of its pendulum is too long. to shorten the period and make the clock run faster, you should.
Running slowly is a grandfather clock. Its pendulum has an excessively lengthy period. You can speed up the clock by cutting the period in half. To do this, reduce the pendulum's length.
In order to allow it to freely swing, a weight is suspended from a pivot like a pendulum. The restoring force from gravity will cause a pendulum to accelerate back toward its equilibrium position when it is sideways moved from its resting, equilibrium position. The pendulum swings back and forth about the equilibrium position after being freed due to the restoring force acting on its mass. The period is the length of time required for one full cycle, which includes both a left and right swing. The length of the pendulum and, to a lesser extent, its amplitude, or swing breadth, both affect the period.
Learn more about pendulum here:
https://brainly.com/question/29702798
#SPJ4
6. over what range of distances from the sun would you expect to find only solid, rocky material collecting together to form a terrestrial planet? explain your reasoning.
The distance from the sun at which this material can collect and form a terrestrial planet is influenced by a number of factors, including the presence of volatile materials, and the amount of radiation and heat being emitted by the star.
In general, terrestrial planets are thought to form within a habitable zone, which is a range of distances from a star where the temperature is just right for liquid water to exist on the surface of a planet. This zone is often referred to as the "Goldilocks zone," because it is not too hot and not too cold for life as we know it.
The inner boundary of the habitable zone is determined by the distance at which the temperature of the protoplanetary disk is too high for water ice to exist, while the outer boundary is determined by the distance at which the temperature of the disk is too low for water vapor to remain in the atmosphere.
Based on these factors, it is thought that terrestrial planets can form within a distance range of approximately 0.8 to 1.5 astronomical units (AU) from the sun. One AU is the average distance from the Earth to the sun, which is about 93 million miles.
Which best describes the acceleration of the object? constant and positive constant and negative changing and positive changing and negative
a brass plug is to be placed in a ring made of iron. at 15oc, the diameter of the plug is 8.755 cm and that of the inside of the ring is 8.741 cm. they must both be brought to what common temperature in order to fit?
To fit, they must both be chilled to -150 °C from a starting temperature of 20 °C.
What is the physics formula for diameter?The diameter is actually made up of two parts, each of which is a radius. Thus, the diameter formula is: Diameter = 2 the radius measurement. This equation can be expressed quickly as d = 2r.
Why is it referred to as a diameter?The radius is the length from the center to any point on the surface. In a similar manner, the diameter of a circle is defined as the distance traversed by two points on its surface through its center. In other words, the radius and diameter are equal.
To know more about Diameter visit:
https://brainly.com/question/4445028
#SPJ4
How does changing the amplitude affect the wave speed
Answer:
sigh
Explanation:
Let's explain this in math terms. A=x A>y a=c right? So then, Y>x but X=C+Y. Then A<A. Whats the answer?
What is the rest mass m of a particle traveling with the speed of light in the laboratory frame. Express your answer in MeV/c? to one decimal place.
The rest mass m of a particle traveling with the speed of light in the laboratory frame is 0.
We know that, formula for mass of object can be given by:
m= [tex]\frac{m_{0} }{1-\sqrt{v^{2}/c^{2} } }[/tex]
where
m = mass of object
[tex]m_{0}[/tex] = rest mass
v = speed of the particle
c = speed of light
By Modifying this equation we get :
Given speed of particle is equal to speed of light.
i.e. v = c.
Putting this value in above equation we get [tex]m_{0}[/tex] =0.
Therefore, the rest mass of a particle traveling with the speed of light in the laboratory frame is 0.
For more such questions on speed :
brainly.com/question/14014442
#SPJ4
sider the standing wave on a guitar string and the sound wave generated by the guitar as a result of this vibration. what do these two waves have in commo
The standing wave and sound wave have the same frequency
When a guitar string is plucked or strummed, it vibrates and creates a standing wave pattern. The frequency of this standing wave determines the pitch of the note that is produced by the guitar. The sound wave that is produced by the vibrating string will also have the same frequency as the standing wave. This is because the sound wave is created by the vibrations of the string, which are determined by the standing wave pattern.
The air molecules vibrate when the guitar vibrates, causing these waves to have the same frequency. Since a wave's period is inversely proportional to its frequency in this instance, the period will also be identical. Since wavelength and frequency are the products of speed, waves will travel at varying speeds because of this. As a result, both the period and frequency are identical.
Read more about frequency on:
https://brainly.com/question/254161
#SPJ4
which of the following cannot travel in a vacuum? a. a yellow light wave b. a sound wave c. a radio wave d. all can travel in a vacuum. e. none can travel in a vacuum.
Which of the following cannot travel in a vacuum- none can travel in a vacuum.
To travel from one place to another by car, train, plane or ship; Travel: Travel for pleasure. To move or move from one place or point to another. Continue or proceed in any way. As a representative of a commercial company, I travel from place to place. Communicate or Spouse: He travels in wealthy crowds.
Travel refers to activities that involve long journeys. Tourism also means travel, but tourism has a specific purpose. It means a trip to a pleasant place. We travel with our hearts and eyes open to learning more about the world than a newspaper can contain. We travel by ignorance and knowledge to bring the least we can to regions where the distribution of wealth is different.
Learn more about Travel here:
https://brainly.com/question/28779362
#SPJ4
if 90 j of work are needed to stretch a spring from 8 cm to 13 cm and another 294 j are needed to stretch it from 13 cm to 20 cm, what is the natural length of the spring?
The natural length of the spring is 10 cm. The further explanation about that can be seen below.
To find the natural length of the spring, we need to find the amount of work needed to stretch the spring from its natural length to 8 cm and from its natural length to 13 cm, and set these equal to 90 J and 294 J, respectively. Let's call the natural length of the spring x and the spring constant k.
The work needed to stretch the spring from its natural length to a length L is given by:
W = 1/2 * k * (L - x)^2
Substituting this equation into the two given equations and solving for x, we get:
90 J = 1/2 * k * (8 cm - x)^2
294 J = 1/2 * k * (13 cm - x)^2
Solving these equations simultaneously, we find that the natural length of the spring is x = 10 cm.
Learn more about spring, here https://brainly.com/question/14670501
#SPJ4
6) suppose the amount of mass in a black hole doubles. does the event horizon change? if so, how does it change?
When the amount of mass in a black hole twice, the event horizon doubles as mass.
The black hole's mass affects the event horizon's size. The radius of a black hole increases with its mass. For the Sun or any object with a solar mass of one, the event horizon is 3 km (a little under two miles). Black holes become less dense the more mass they receive. The singularity, a place that is nearly infinitely small and dense, is where a black hole's whole mass is concentrated. The event horizon, or the radius from the singularity at which its escape velocity exceeds the speed of light, encircles this point. The boundary where the velocity required to escape from a black hole exceeds the speed of light, the universe's maximum speed, is defined by the "surface" of the black hole, also known as its event horizon. Radiation and matter fall in, but they are unable to exit.
To learn more about black hole click here https://brainly.com/question/2456466
#SPJ4
across a horizontal distance of feet, a roller coaster has a steep drop. the height of the roller coaster at the bottom of the drop is feet, compared to its height at the top of the drop. what is the average amount that the roller coaster's height changes over each horizontal foot?
For each horizontal foot, the roller coaster changes 6 feet in height.
A roller coaster has a steep drop over a horizontal distance of 25 feet.
the distance is 25 ft.
At the bottom of the drop, the roller coaster is 150 feet tall. (A negative sign is displayed since the measurement is made from top to bottom.)
The increase is therefore 150 feet.
The roller coaster's gradient is,
m= rise/run= 150/25= 6
A slope of 6 indicates that the object rises by 6 units for every unit of run.
As a result, the roller coaster changes height by six feet for every horizontal foot.
Know more about Heights at:
https://brainly.com/question/27243378
#SPJ4
please help (urgent)
A small object of mass m is attached to a light string. The light string is attached to a fixed point on the ceiling. The object moves along a circular path in the horizontal plane forming a conical pendulum. The angle between the string and the vertical direction is fixed.
1. How are T, mg, and related?
A. Tcos =mg
B. T = mg cos
C. T sin =mg
D. T = mg sin
E. T = mg
2. What is the net force pointing to the center of the circle?
A. T
B. T sin
C. T tan
D. mg cos
E. T cos
3. How are [tex]ma_{cp}[/tex] and mg related?
A. [tex]ma_{cp}[/tex] = mg sin
B. [tex]ma_{cp}[/tex] =mg tan
C. [tex]ma_{cp}[/tex] = mg cos
D. [tex]ma_{cp}[/tex] = mg
E. [tex]ma_{cp}[/tex] tan =mg
4. If =15.0° and r = 0.200 m, find the angular speed and the linear speed of the object.
v = ____m/s
[tex]\omega[/tex] = ___rad/s
5. Is this a simple harmonic motion?
A. yes
B. no
Answer:
The correct answer is D. T = mg sin. The tension in the string (T) is equal to the mass (m) of the object multiplied by the acceleration due to gravity (g) and the sine of the angle between the string and the vertical direction.
The correct answer is E. T cos. The net force pointing to the center of the circle is the tension in the string (T) multiplied by the cosine of the angle between the string and the vertical direction.
The correct answer is A. = mg sin. The centripetal force is equal to the mass (m) of the object multiplied by the acceleration due to gravity (g) and the sine of the angle between the string and the vertical direction.
To find the angular speed of the object, you can use the formula = v/r, where v is the linear speed of the object and r is the radius of the circular path. Substituting the given values, you get = v/0.200 m. To find the linear speed, you can use the formula v = r , so v = (0.200 m)( ). Solving for and v, you get = 4.47 rad/s and v = 0.895 m/s.
The correct answer is B. no. A simple harmonic motion is a type of periodic motion where the restoring force is proportional to the displacement from the equilibrium position and is always directed towards the equilibrium position. In a conical pendulum, the restoring force is not proportional to the displacement and is not always directed towards the equilibrium position, so it is not a simple harmonic motion.
Explanation:
On a route to senior prom, a couple was cut off by another car. The couple traveling 21 m/s slammed on the brakes and slowed to a speed of 8 m/s in a time of 1.4 seconds. How far did they travel while breaking?
1) 18 m
2) 20 m
3) 29 m
4) 41 m
5) answer not shown
They travelled 20 meter while breaking. Hence, option (2) is correct.
What is speed?Speed is distance travelled by the object per unit time. Due to having no direction and only having magnitude, speed is a scalar quantity With SI unit meter/second.
Initial speed of the car is: u = 21 m/s.
Final speed of the car: v = 8 m/s.
Time interval: t = 1.4 second.
Deceleration of the car: a = (u-v)/t = (21 - 8)/1.4 m/s^2 = 9.29 m/s^2.
Hence, the car traveled during deceleration:
s = ut - at^2/2
= (21×1.4) - 9.29×(1.4)^2/2 meter
= 20 meter.
Hence, option (2) is correct.
Learn more about speed here:
https://brainly.com/question/28224010
#SPJ1
a solenoid of length 2.50 cm and radius 0.550 cm has 45 turns. if the wire of the solenoid has 1.15 amps of current, what is the magnitude of the magn
According to the given statement 11.38 T is the magnitude of the magnetic field inside the solenoid.
What is vector and magnitude?By using the symbol |v|, the strength of a vector theorem can be utilized to determine the length for such a given vector (let's say v). This amount is essentially the distance between the vector's beginning point and ending point. The range calculation, which we will go over in this section, is used to determine the vector's magnitude.
Briefing:Length of solenoid, L = 2.5 cm = 0.025 m
Radius of solenoid, r = 0.55 cm = 0.0055 m
Number of turns, N = 45 turns
Current, I = 1.15 A
Magnetic field, B, is given as:
B = (N*r*I) /L
B = (45 * 0.0055 * 1.15)/0.025
B = 11.38 T
To know more about Magnitude visit:
https://brainly.com/question/1313542
#SPJ4
The complete question is-
A solenoid of length 2.50 cm and radius 0.550 cm has 45 turns. If the wire of the solenoid has 1.15 amps of current, what is the magnitude of the magnetic field inside the solenoid?
what period do you expect to find for small amplitude swinging motion of a rock tied to a 1.0 m long string?
For small amplitude swinging motion of a rock tied to a 1.0 m long string is 2.0 s.
The length of the pendulum L = 1.0m = 100cm
Hence it is a seconds pendulum
so, its time period would be 2 seconds
[tex]\text { From } \begin{aligned}T & =2 \pi \sqrt{\frac{l}{g}} \\& =2 * 3.14 * \sqrt{\frac{1.0}{9.81}} \\& =2.0 \mathrm{~s}\end{aligned}[/tex]
The amount of time that a behavior lasts or a condition persists. Depending on the type of activity or situation under consideration, it may be measured in seconds or in millions of years.
To learn more about amplitude visit:https://brainly.com/question/8662436
#SPJ4
a baseball is hit with a horizontal speed of 16 m/s and a vertical speed of 12 m/s upward. what are these speeds 5 s later?
After t = 4 seconds, ascertain the baseball's vx and vy horizontal and vertical speeds. Only the pressure applied on the object's vertical component—gravity—is recognized by us. This indicates that the perpendicular speed is unchanged.
What is the easiest way to define gravity?A planet and maybe other bodies pull objects toward their centers through their gravitational force. The gravitational attraction of the sun keeps all of the planets in their orbit around it.
How do these two things affect gravity?The size of an object and its distance from other things both have an impact on gravity. The mass of a thing is a gauge for its matter content. A heavier object will fall to the ground more quickly than a lighter one. Gravitational pull weakens when the separation between two objects grows.
To know more about gravity visit:
https://brainly.com/question/14874038
#SPJ4
Consider how Nyad physically and mentally trained for her endeavor. Which of these training and conditioning exercises—those designed to increase her physical endurance or those intended to get her through mentally—do you believe helped her the most and why?
Physical and mental training helps to increase endurance.
What are the benefits of physical and mental training?It should come as no surprise that helping your body will also benefit your mind. Your brain receives more oxygen when you exercise. Additionally, it raises your brain's levels of endorphins, or "feel-good" chemicals. This is why it makes sense that those who maintain a healthy physical state also frequently exhibit higher levels of mental agility.
Exercise your mind just as much as your body. A study published in the Proceedings of the National Academy of Sciences claims that specific memory workouts can improve "fluid intelligence," or the capacity to reason and solve novel challenges.
Learn more about mental training here:
https://brainly.com/question/29489328
#SPJ1
express the internal shear in terms of x for 0≤x≤6ft, where x is in ft.
The internal shear in terms of x for [tex]$0 \leq x \leq 6 \mathrm{ft}$[/tex], where x is in ft. will be[tex]V_x & =A_y-400 \times x =1900-400 x[/tex]
A free-body diagram is a graphical representation used in physics and engineering to show the applied forces, moments, and consequent reactions on a body in a specific situation. It shows a body or group of connected bodies together with all the applied forces, times, and responses that the bodies experience.
Potential energy and equilibrium are related in that the body's potential energy is lower in such an equilibrium.
In this case, the state generates a force that does not resist the displacement when a little distance displaces the body.
Draw the free-body diagram as shown below.
Consider the moment equilibrium condition about B.
[tex]$$\begin{aligned}& M_B=0 \\& A_y \times 9-400 \times 6 \times\left(\frac{6}{2}+3\right)-900 \times 3=0 \\& A_y=1900 \mathrm{lb}\end{aligned}$$[/tex]
Write the internal shear force equation for [tex]$0 \leq x \leq 6 \mathrm{ft}$[/tex].
[tex]V_x & =A_y-400 \times x =1900-400 x[/tex]
For more questions on Internal shear
https://brainly.com/question/27131239
#SPJ4
The complete question should be:
Express the internal shear in terms of x for [tex]$0 \leq x \leq 6 \mathrm{ft}$[/tex], where x is in ft.
Express your answer in terms of x. Express your answer using three significant figures.