what is the maximum number of electrons that can occupy the 3rd orbitals

The volume of oxalic acid required for the reaction is 76.8 mL.

Neutralization reactions are reaction in which acids reacts with bases to form salt and water only.

The neutralization reaction between oxalic acid and NaOH is given in the equation below:

(COOH)₂ (aq) + 2 NaOH (aq) ---> (COONa)₂ (aq) + H₂O (l)

The mole ratio of oxalic acid to NaOH is 1 : 2

moles of NaOH = Moles of oxalic acid /2

Moles of NaOH = 35.2 mL * 0.546 = 19.2 mmoles

Moles of oxalic acid = 19.2 / 2 = 9.6 mmoles

Volume of oxalic acid required = 9.6 / 0.125

Volume of oxalic acid = 76.8 mL

Learn more about oxalic acid at: https://brainly.com/question/15213840

#SPJ1

The general gas law states that the product of the pressure and the volume of the gas, divided by the thermodynamic temperature, in kelvin, is equal to a constant. This constant, in turn, is described by the Clapeyron equation, note:

Where:

P = pressure exerted by the gas

V = volume occupied by this gas

T = temperature in kelvin

R = universal ideal gas constant (0.082 atm.L/mol.K)

n = number of moles

Step 1 - Transform 20 °C into kelvin using the formula: Tk = 273 + Tc

Tk = 273 + 20

Tk = 293 K

Step 2 - Replace the values on the formula:

P = 0.900 atm

V = 8.50L

n = ???

R = 0.082 atm.L/mol.K

T = 293

PV = nRT

0.900 x 8.50 = n x 0.082 x 293

n = 0.106/24.026

n = 0.004407 moles of oxygen

Step 3 - We transform moles into gram using the formula: mass = moles x molar mass

molar mass of O2 = (2x16) = 32 g/mol

mass = 0.004407 x 32

mass = 0.141 grams of O2

Answer: 0.141 grams of O2

Taking into account the change of units, a slice of Swiss cheese contains:

(a) 0.042 grams of sodium.

(b) 0.00148 ounces of sodium.

(c) 0.0000926 pounds of sodium.

The rule of three is a way of solving problems of proportionality between three known values and an unknown value, establishing a relationship of proportionality between all of them.

If the relationship between the magnitudes is direct, the direct rule of three must be applied as follow, being a, b and c known data and x the variable to be calculated:

a ⇒ b

c ⇒ x

So: x= (c×b)÷ a

The direct rule of three is the rule applied in this case where there is a change of units.

To perform in this case the conversion of units, you can apply the following rule of three: if 1 mg is 0.001 grams, 42 mg is equivalent to how many grams?

1 mg ⇒ 0.001 grams

42 mg ⇒ x

So:

x= (42 mg× 0.001 grams)÷ 1 mg

Solving:

x= 0.042 grams

Finally, the mass is 0.042 grams.

To perform in this case the conversion of units, you can apply the following rule of three: if 453.6 g is 16 oz, 0.042 g is equivalent to how many ounces?

453.6 g ⇒ 16 oz

0.042 g ⇒ x

So:

x= (0.042 g× 16 oz)÷ 453.6 g

Solving:

x= 0.00148 oz

Finally, the mass is 0.00148 ounces.

To perform in this case the conversion of units, you can apply the following rule of three: if 453.6 g is 1 lb, 0.042 g is equivalent to how many pounds?

453.6 g ⇒ 1 lb

0.042 g ⇒ x

So:

x= (0.042 g× 1 lb)÷ 453.6 g

Solving:

x= 0.0000926 pounds

Finally, the mass is 0.0000926 pounds.

Learn more about change of units:

brainly.com/question/13266518

brainly.com/question/17416290

brainly.com/question/16241961

#SPJ1

Hydrogen(H₂) will have the highest speed if all the gases were at the same temperature; correct option is D

Hydrogen is described as the chemical element with the symbol H and atomic number 1. Hydrogen is also known as the lightest element which at standard conditions is a gas of diatomic molecules having the formula H₂.

Hydrogen has lowest molecular mass as compared to other gases in the group of options . So, therefore we can conclude that it will have highest speed.

Hydrogen is known to be a colorless, odorless, tasteless, flammable gaseous substance that is the simplest member of the family of chemical elements.

Hydrogen is found to be present in water and in almost all molecules in living things and remains bonded with carbon and oxygen atoms. Hydrogen is widely said to be the most abundant element in the universe.

Hydrogen is spotless and is non-toxic and safe to produce from various different sources, transport, and store in large amounts.

Learn more about hydrogen at: https://brainly.com/question/20373622

#SPJ1

The question requires us to provide the meaning of "molecules".

A molecule can be defined as a group of atoms (being from the same or different elements) that are bonded together, which forms the smallest unit of a chemical compound. A molecule can also be defined as the smallest unit of a substance that presents the same physical and chemical properties of the substance.

Answer:

1.30 g/cm3

Explanation:

d = m/V = 32.4g / 24.9cm3 = 1.30 g/cm3

The question requires us to calculate the rate of change of NO, given that the rate of change of Cl2 is -0.0500 M/s.

The balanced chemical reaction provided is:

From the stochiometry of the reaction we can say that Δ[NO] = 2/1 Δ[Cl2], thus we can calculate the rate of change of NO as:

Therefore, the rate of change of NO is -0.100 M/s.

Explanation:

The percentage composition of any given compound is nothing but the ratio of the amount of each element present in the compound to the total amount of individual elements present in the compound multiplied by 100. Here, we measure the quantity in terms of grams of the elements present in the solution.

The energy of one quantum of blue light that has a frequency of 6.46 x 10¹⁴ s-¹ is 4.28 × 10-¹⁹J.

A photon refers to the quantum of light and other electromagnetic energy, regarded as a discrete particle having zero rest mass, no electric charge, and an indefinitely long lifetime.

The energy of a photon can be calculated by using the following formula:

E = hf

Where;

According to this question, blue light has a frequency of 6.46 x 10¹⁴ s-¹. The energy can be calculated as follows:

E = 6.626 × 10-³⁴ × 6.46 x 10¹⁴

E = 4.28 × 10-¹⁹J

Therefore, 4.28 × 10-¹⁹J is the energy of the blue light.

Learn more about energy at: https://brainly.com/question/2393994

#SPJ1

The nutritional calories per gram of candy will be 5010 Cal/g

Given,

mass(m) = 4.1g

ΔT = 2.1K

Heat capacity (C) = 41.50KJ/K

= 41.50÷ 4.2 Kcal/K (since, 1cal = 4.2j)

(C) = 9.8 ×1000 Cal/K

We know that,

Q = msΔT where (C = ms) and also,

Q = CΔT = (9.8 × 1000×2.1)Cal

(Q/m = nutritional calorie per gram)

Q/m = 9.8×1000×2.1 ÷ 4.1 Cal/g

= 5010 Cal/g or 5.01KCal/g

Therefore the nutritional calories per gram of the candy will be 5010Cal/g or 5.1 KCal/g

Learn more about calories and calorimetry at

https://brainly.in/question/16236210

#SPJ1

The nutritional calories per gram of candy will be 5010 Cal/g.

mass (m) is 4.1 g

ΔT is 2.1 K

Heat capacity (C) is 41.50 KJ/K

= 41.50÷ 4.2 K cal/K (since, 1 cal is 4.2 j)

(C) = 9.8 ×1000 Cal/K

We know that,

Q is msΔT where (C = ms) and also,

Q = CΔT = (9.8 × 1000×2.1)Cal

(Q/m = nutritional calorie per gram)

Q/m = 9.8×1000×2.1 ÷ 4.1 Cal/g

= 5010 Cal/g or 5.01KCal/g

Therefore, if the heat capacity of the calorimeter is 40.80 kJ⋅K−1 the nutritional calories per gram of the candy will be 5010 Cal/g or 5.1 KCal/g.

Learn more about calories and calorimeter at:

https://brainly.com/question/24167789

#SPJ1

The correct empirical formula of the glucose molecule is [tex]CH_{2} O[/tex].

The empirical formula is the simplest formula of the compound. Let us note that the structural formula shows the arrangement of the atoms of the compound while the molecular formula shows the number of each of the atoms that is in the substance.

Now we know that the empirical formula determines the ratio of each of the atoms that are in a  compound as such the formula that is shown can not be the empirical formula of glucose as we can see in the question that is above here.

Learn more about empirical formula:https://brainly.com/question/14044066

#SPJ1

Answer:

Explanation:

i don't quite know what the question is here, but...

6+12=18  or Amanda's ball is heavier so the ball would have a hard time, again I don't know what the real question is here

Answer:

Amanda’s ball is heavier so it’s harder throw

Explanation:

Claim: The reason why Amanda was having such a hard time was because she choose a heavier ballEvidence: Jason had no problem with his ball which was 6lb but Amanda was struggle with double the weight of Jason’s ball weight which was 12lb having more mass.Reasoning: Jason picked up a ball with less mass weighting at 6 pounds but because of this his ball was much easier to roll. This was due to Newton’s second law since he had such a lighter ball it was easier for him to through. Newton’s second law is force equal mass times acceleration (f=ma). The opposite could be said about Amanda her ball was so heavy that’s why it was harder to throw. When the mass of Amanda's ball is thrown onto the alley it goes slower because it has much more mass to weight it down, giving the ball less acceleration. 

20.23 mL is the volume of 0.5 moles of methanol, if it has a density of 0.792 g/mL.

Methanol (CH3OH), also known as methyl alcohol, wood alcohol, or wood spirit, is the most basic of a large group of organic compounds known as alcohols. It is made up of a methyl group (CH3) connected to a hydroxy group (OH).

The destructive distillation of wood once produced methanol. The direct combining of hydrogen and carbon monoxide gas in the presence of a catalyst is the foundation of the modern method for making methanol. Syngas, a blend of carbon monoxide and hydrogen produced from biomass, is being used more frequently to create methanol.

The formula for density is

Density = mass/volume

Here, density is given that is 0.792 g/ml

mass is 0.5 moles which is equal to 16.02g      (substance mass conversion)

Now we need to find volume that is

V = mass/density

V =  16.02g/0.792 g/mL

V = 20.23 mL

Thus, 20.23 mL is the volume of 0.5 moles of methanol

Learn more about methanol

https://brainly.com/question/17078152

#SPJ9

Answer:

0.698 M.

Explanation:

Let's remember the concept of molarity: The molarity (M) of a solution is the number of moles of solute dissolved in one liter of solution. To calculate the molarity of a solution, divide the moles of solute by the volume of the solution expressed in liters, like this:

To find the moles of solute (KCl, in this case) we have to convert 14.6 g of KCl to moles using its molar mass which is 74.5 g/mol, like this:

Now, let's convert 281 mL to L. Remember that 1 L equals 1000 mL:

The final step is to replace the data that we obtained in the molarity formula:

The answer would be that the molarity of the solution is 0.698 M.

Answer:

=> 0.12428 M

Explanation:

To begin, write down a balanced equation;

Ca(HCO3)2 + 2HNO3 => Ca(NO3)2 + 2H2O + 2CO2

Then calculate the number of moles contained in 9.56 mL of 1.30M HNO3

We know that molarity is contained in 1000mL

1000 mL = 1.30 moles

9.56 mL = ?

= (9.56 × 1.30)/1000

= 0.012428 moles

Mole ratio

Ca(HCO3)2 : HNO3

1 : 2

But, xmoles : 0.012428 moles

x = 1/2 × 0.012428

= 0.006214 moles

This moles is contained in 50 mL solution.

50 mL = 0.006214 moles

1000 mL = ?

= (1000 × 0.006214)/50

= 0.12428M

Helium gains no stability by adding one H because it is already stable due to a complete valance shell or orbit.

To attain stability an atom will gain, lose, or share electrons to complete the outermost shell means the last shell. Helium atom has two electrons in the first orbit which completes the doublet rule so it is stable we know that noble gases are stable elements and we know that helium is also a member of a noble family. Nuclides are the most stable because it contains even numbers of both protons and neutrons which make them less radioactive. Nuclear stability is greater in nuclides that comprise even numbers of protons and neutrons or both.

So we can conclude that the helium atom does not need hydrogen to get stability.

Learn more about helium here: https://brainly.com/question/26226232

#SPJ1

Mass in grams of 7.54 x10³⁰ formula units of magnesium chloride is 7.178 gram

Mass is the measure of amount of matter in a substance or an object and magnesium chloride is the chemical compound this salt are typically ionic halide being highly soluble in water

Here given data is

Molar mass of  magnesium chloride = 95.211 grams/mole

Number of mole of magnesium given =  7.54 x10³⁰

Therefore mass of magnesium chloride

Molar mass × number of mole

Mass = 95.211 grams/mole × 7.54 x10³⁰

Mass = 7.178 gram

Mass in gram is 7.178 gram

Know more about magnesium chloride

https://brainly.com/question/6613610

#SPJ1

The potential energy is 84.366 J.

We know that,  potential energy is PE= mgh

PE= 5.0 * 9.81 * 1.72

PE= 84.366 J

Potential energy is a form of stored energy that is dependent on the relationship between different system components. When a spring is compressed or stretched, its potential energy increases. If a steel ball is raised above the ground as opposed to falling to the ground, it has more potential energy. It is capable of performing more work when raised. Potential energy is a characteristic of systems rather than of particular bodies or particles; for instance, the system made up of Earth and the elevated ball has more potential energy as they become further apart.

To learn more about Potential energy  visit:https://brainly.com/question/24284560

#SPJ1

The mass of an object is 7.1788g.

We are provided with the following information:

The density of an object = 1.37 [tex]g/cm^{3}[/tex]

Volume of an object = 5.24 [tex]cm^{3}[/tex]

Density of any substance is defined as the ratio of mass of the substance to the volume of the substance. Density is represented by ρ. The SI unit of density is kg/m³.

Density of an object = (Mass of an object) / (Volume of an object)

On substituting the value of density of an object and volume of an object, we get

1.37 [tex]g/cm^{3}[/tex] = ( Mass of an object )/ 5.24 [tex]cm^{3}[/tex]

Mass of an object = (1.37 [tex]g/cm^{3}[/tex] ) × ( 5.24 [tex]cm^{3}[/tex] )

Mass of an object = 7.1788 g

Thus, we can conclude that the object has a mass of 7.1788 g.

To know more about Density refer to the link:

https://brainly.com/question/1354972

#SPJ9

Nitrogen Flouride is an important covalent compound. A diagram showing the arrangement of the valency electrons can be drawn using Lewis Dot Structures.

The basic principle of Lewis Dot Structures is obtaining either a doublet or octet. Nitrogen being a second-period element posses orbitals to accommodate 8 electrons. The electronic arrangement of fluorine can be stabilized by forming a doublet.

Let:

Nitrogen Flouride is pyramidal in existence, with the presence of one lone pair of Nitrogen. The hybridization of 'N' in this covalent molecule is 'sp3'.

Learn more about Lewis Dot Structure:

https://brainly.com/question/10956061

These are multiple choice type questions involving various concepts of solubility of a solution. The answers can be specified as 8) a 9) b 10) c 11) c 12) b 13) a 14) c 15) b.

The kind of ability of a material, that means the solute, to combine with another substance, that is the solvent, is known as solubility in chemistry. The opposite characteristic, insolubility, is the inability of the solute to create such a solution. Famous Examples of Solubility in Daily Life are from Everyday Uses.

At 20 °C, sugar typically dissolves in water molecules. Gelatin is heat-sensitive and soluble in water.

Sugar, flavorings, and preservatives are often soluble in water at 20 °C and make up powdered juices. Agricultural fertilizers frequently contain nitrates.

Based on the concentration at which they dissolve in a solvent, solutes are categorized as being highly soluble, sparingly soluble, or insoluble. If a concentration of 0.1 is used, it is claimed to be soluble.

To know more about solubility, visit:

https://brainly.com/question/9098308

#SPJ13

Area 1 is Noble gases, Area 2 is alkali metals,  Area 3 is metalloids, Area 4 is  alkaline earth metals, Area 5 is non-metal, Area 6 is transition metals and Area 7 is halogens .

In this question, we need to Select the label for each corresponding area . Area 1 is of Noble gases also known as group 18 of the periodic table. Area 2 is of alkali metals in group 1 of the periodic table.

Area 3 is of metalloids present in between of metals and non-metals in the periodic table . Area 4 is of alkaline earth metals in group 2 of the periodic table . Area 5 is of non-metal. Area 6 is of transition metals. Area 7 is of halogens  in group 17 of the periodic table.

To know more about periodic table refer to the link:

https://brainly.com/question/1173237

#SPJ1

The pH of a 0.63 M solution of carbonic acid is 0.2.

pH of a solution is a measure of how acidic or basic water is. The range goes from 0 - 14, with 7 being neutral. pH of less than 7 indicate acidity, whereas a pH of greater than 7 indicates a base.

pH is a measure of the relative amount of free hydrogen and hydroxyl ions {H⁺} in the water. The pH of a substance or solution can be calculated using the following formula:

pH = - log {H⁺}

According to this question, a carbonic acid has a concentration of 0.63M. The pH of the solution is as follows:

pH = - log {0.63}

pH = 0.2

Therefore, 0.63M of carbonic acid has a pH of 0.2.

Learn more about pH at: https://brainly.com/question/491373

#SPJ1

The pressure is 1.99 atm.

The problem we are dealing with is related to  Gay-Lussac's Law, where the  Gay-Lussac's Law states that the pressure of a given sum of gas held at a steady volume is directly proportional to the Kelvin temperature and If you warm a gas we allow the atoms to get more energy so they moves more quickly.

Since the formula of Gay-Lussac's Law is:

P₁/T₁=P₂/T₂

where, P₁, P₂ are the pressures and T₁ ,T₂ are the temperatures.

As   we are provided with the values such as :

P₁ = 1.4 atm and T₁= (28.3 + 273.15) K = 301.45 K and

T₂ = (115.4 + 273.15) K = 388.55 K.

So from the given formula, we can calculate the P₂ which is

P₂=P₁×(T₂/T₁)

   = 1.4x( 388.55/273.15)

   = 1.99 atm

To know more about pressure refer to the link https://brainly.com/question/14273070?referrer=searchResults.

#SPJ1

Answer:

Explanation:

Here, we want to get the percent yield of the reaction

Mathematically:

From the question:

The actual yield is 18 mol while the theoretical yield is 27 mol

Substituting the values, we have it that:

Any liquid has a 1 atmosphere vapor pressure at its boiling point.  At 90 degrees Celsius, water has a vapor pressure of 0.692 atm.

The weight exerted on a unit area of the surface where the tank is kept determines the pressure at the bottom of a tank that is holding water.

That is equivalent to:

pressure = weight/area,

weight = mass (m) × acceleration due to gravity, and

weight = mass (m) (g).

Thus, pressure is defined as m × g/area.

At 90 degrees Celsius, water has a vapor pressure of 0.692 atm.

simple pressure = e^(20.386 - (5132 / (temperature + 273)) , where vapor pressure exists represented in mmHg and temperature in kelvins.

P total = p1 + p2

The relationship between mole fraction and vapour pressure at constant temperature.

Any liquid has a 1 atmosphere vapor pressure at its boiling point. Water has a single atmosphere of vapor pressure at 100 degrees Celsius. As a result, the boiling point of water is 100 degrees Celsius.

Therefore, the correct answer is option b) 69 k pa.

To learn more about vapor pressure refer to:

https://brainly.com/question/805547

#SPJ13

Usually scientists will collide a large isotope such as Uranium-235 with a neutron. The collision results in several more nuclear fissions, also known as a chain reaction . This results in a HUGE release in energy!

Nuclear fission occurs when large isotopes such as uranium - 235 collide with neutron and split into two or more smaller atoms. and releases a large quantity of energy. in this process nucleus of atom split into two or more smaller nuclei . this result in huge release in energy and resulting in chain reaction.

Thus, Usually scientists will collide a large isotope such as Uranium-235 with a neutron. The collision results in several more nuclear fissions, also known as a chain reaction . This results in a HUGE release in energy!

To learn more about Nuclear fission here

https://brainly.com/question/913303

#SPJ1

The non-living parts of the ecosystem such as water, dirt, and air are called abiotic factors. Therefore, option (B) is correct.

An abiotic factor is a non-living part that shapes the environment of an ecosystem. Examples such as temperature, light, and water are parts of the terrestrial ecosystem.  Abiotic factors include salinity and ocean currents in a marine ecosystem. Abiotic and biotic factors come together to create a unique ecosystem.

Abiotic factors are chemical and physical parts that affect living organisms and the functioning of ecosystems. Abiotic factors associated with underpinning biology as a whole. They affect all forms of environmental conditions such as land animals or marine. Humans can make or change abiotic factors in an environment.

Abiotic factors would include water, temperature, humidity, light, radiation, atmosphere, acidity, and soil. The macroscopic climate commonly influences each of the above. Abiotic factors in ocean environments include aerial exposure, substrate solar energy, water clarity, and tides.

Learn more about abiotic factors, here:

https://brainly.com/question/11274302

#SPJ1

       The quantity of protons in an atom's nucleus is known as the atomic number. The number of protons determines an element's identity (i.e., an element with 6 protons is a carbon atom, no matter how many neutrons may be present).

Answer :A. Atomic number

        The number of protons in an atom determines its atomic number, and isotopes have the same atomic number but different numbers of neutrons.

           All isotopes of a given element have the same atomic number because they all have the same amount of protons (for example, the atomic number of helium is always 2).

          An isotope is one of two or more chemical elements that exist in different forms. Varied isotopes of an element share the same atomic number and protons in their nuclei, giving them the same atomic weight. However, each elemental isotope has a different amount of neutrons, which changes its atomic weight.

The two chlorine isotopes that are found in nature are represented by the symbols 3517Cl and 3717Cl.

The elements hydrogen, deuterium, and tritium each have one isotope.

To Learn more About Atomic number, Refer:

https://brainly.com/question/11353462

#SPJ13

0.3405moles.

In order to get the moles of sugar, we need to get the final volume using the dilution factor as shown below:

where:

• C1 and C2 are the, initial and final ,concentration

• V1 and V2 are the, initial and final, volume

Given the following parameters:

C1 = 2.27M

V1 = 150mL = 0.15L

C2 = 1.88M

V2 = ?

Substitute the given parameters into the formula:

Next is to get the moles of sugar in the lemonade solution using the formula below:

Hence the number of moles of sugar that are in the lemonade solution is 0.3405moles.