Both of them are true. According to technician a, the control module shuts off or inhibits the system when the abs aren't working properly. According to the expert, the antilock braking system is disabled .
What does a technician do?Technicians are knowledgeable workers that are found in practically every field. Systems and equipment of different kinds are inspected, installed, repaired, and replaced. Technicians should have been able to follow instructions and speak well since they frequently collaborate with other skilled individuals.
What does a technician need to qualify?Matriculation, SSLC plus ITI, course completion for an apprenticeship, or an engineering degree or diploma. Technicians. Matriculation, SSLC Plus ITI, Act Apprenticeship Course Completed, 10 + 2 with Math and Sciences, or Engineering Diploma (As Applicable).
To know more about Technician visit :
https://brainly.com/question/28988558
#SPJ1
which of these are devices that let employees enter buildings and restricted areas and access secured computer systems at any time, day or night?
The device that let employees enter buildings and restricted areas and access secured computer systems at any time, day or night is generally referred to as B. badge readers.
What is cybersecurity?Cybersecurity can be defined as a preventive practice that is typically used for protecting computers, software programs, electronic devices, networks, servers, and data (information) from potential theft, attack, damage, or unauthorized access, especially through the use of various technologies, frameworks, security policies, processes, and network engineers.
What is a badge reader?In Cybersecurity, a badge reader can be defined as an electrical and mechanical device that is designed and developed to avail an individual the ability to enter buildings (doors), restricted areas, and access data that are stored on secured computer systems.
Read more on cybersecurity here: https://brainly.com/question/28004913
#SPJ1
Complete Question:
Which of these are devices that let employees enter buildings and restricted areas and access secured computer systems at any time, day or night?
A. Scanners
B. Badge readers
C. Card readers
an architect has proposed a series of stepped roof beams to provide visual impact for a public building with high pedestrian traffic. geometric details of the transition region, as well as the entire beam loading, are presented in the figures below. the beam has a constant thickness and a yield strength . as the lead structural engineer for this project, you are tasked with approving or disapproving the design.
After previously finding comfort and support in a similar environment, men and exhibits now need to find their way to a new and constantly changing relationship with one another.
The connection between the museum and architecture is incredibly complex, and it can only be discussed in a relatively brief essay, with the possibility of misunderstandings resulting from incompleteness and simplicity. Discussion should be limited to common elements and specific issues. Since museum work encompasses such a broad range of goals, strategies, and accomplishments, the common ground could only be correctly described through a very thorough and comprehensive examination. Therefore, we will focus on a few issues that are crucial to the issues that face museums today. Environment can be summed up as the effects of all the living and non-living things that have an impact on human life. Non-living or abiotic elements include water, land, sunshine, rocks, and air, whereas all live or biotic elements are animals, plants, forests, fisheries, and birds. An environment is everything that surrounds us, including both living and nonliving objects like water, soil, plants, and animals that can adapt to their environment. The gift of nature is what sustains life on Earth. The four fundamental elements of the environment are the lithosphere, or rocks and soil, the hydrosphere, or water, and the biosphere, or living component of the environment.
Learn more about environment here
https://brainly.com/question/17413226
#SPJ4
You are tasked with the design of a double- reduction gear train to transmit power and motion from a motor-powered input shaft (a) to an output shaft (C). The input shaft and its bearings are not your concern, but the gear on the input shaft and the gears, bearings, and shaft design for the remaining shafts are your responsibility. Your specific design parameters are listed on the back of this page. 0 Press InPwr InSpd OutSpd Ang Length hp rpm rpm deg inch InLife rev's 20 1176 324 25 11 2.50E+08
The following are the steps to design a double-reduction gear train:
What is reduction?
Reduction is the process of decreasing something or making it smaller in size, amount, degree, or value. It is a fundamental concept in mathematics and economics, but it can also be applied to any type of process, from manufacturing to philosophy.
Reduction can refer to a process of simplification, a change in complexity, or a decrease in the amount of material needed or used. Examples of reduction include reducing the number of steps in a process, reducing the amount of data used to make a decision, or reducing the cost of production. In many cases, reduction can be used to improve efficiency and productivity, or to create a more sustainable system.
1. Determine the gear ratio: The gear ratio is the number of teeth on the input gear (a) divided by the number of teeth on the output gear (C). In this case, the gear ratio would be 1176/324 = 3.65.
2. Calculate the input The following are the steps to design a double-reduction gear train:
1. Determine the gear ratio: The gear ratio is the number of teeth on the input gear (a) divided by the number of teeth on the output gear (C). In this case, the gear ratio would be 1176/324 = 3.65.
2. Calculate the input torque: The input torque is the product of the input power and the speed of the input shaft, or InPwr*InSpd. In this case, the input torque is 20*1176 = 23520 in-lbs.
3. Determine the output torque: The output torque is the product of the output power and the speed of the output shaft, or OutSpd*Ang. In this case, the output torque is 324*25 = 8100 in-lbs.
4. Calculate the center distance: The center distance is the distance between the center of the input gear and the center of the output gear. This distance is determined by the number of teeth on the gears, the gear ratio, and the pitch of the gears. In this case, the center distance is 11/(√3.65) = 6.45 inches.
5. Determine the shaft size and bearing size: The shaft size is determined by the torque rating of the shaft and the bearing size is determined by the shaft size. In this case, the shaft size would be 2.50E+08 in-lbs and the bearing size would be 11/2 inches.
6. Design the gears: The gears must be designed to fit the shaft size and bearing size. The number of teeth on the gears must match the gear ratio. In this case, the input gear would have 1176 teeth and the output gear would have 324 teeth.
7. Assemble and test the gear train: Finally, the gear train must be assembled and tested to ensure that it meets the design parameters.
To learn more about reduction
https://brainly.com/question/14531814
#SPJ4
Which of the following is NOT true about the Internet of Things (IoT) devices?
Millions of IoT devices connected to the Internet can be harnessed as part of a botnet.
Device manufacturers focus on the device functionality and not security.
Attackers may inject bad data into an IoT network through an IoT device like a sensor.
These small devices are easily patched by the user, whether consumer or industrial.
Answer:
These small devices are easily patched by the user, whether consumer or industrial.
One of the main challenges with IoT devices is that they are often difficult or impossible to update or patch. Unlike traditional computers or smartphones, which can be easily updated with security patches and other software updates, many IoT devices are not designed to be easily updated by the user. This is because they may have limited processing power, memory, or storage, and may not have the capability to download and install software updates. As a result, many IoT devices are vulnerable to security threats, and attackers may be able to exploit vulnerabilities in these devices to gain access to an IoT network. In order to protect against these threats, it is important for device manufacturers to focus on security when designing IoT devices, and for users to carefully consider the security of the devices they purchase and use.
(Please mark as brainliest!)
Explanation:
Suppose that a system is in an unsafe state. Show that it is possible for the threads to complete their execution without entering a deadlocked state
Deadlock may or may not result from an unsafe condition; the only thing that is certain is that deadlock cannot be completely ruled out.
Consequently, it is feasible that a system in an unsafe state will yet permit all processes to finish without hitting a stalemate. Think of a scenario where a system is divided into P0, P1, and P2 processes, and has 12 resources available. Following is the policy that determines how the resources are distributed:
Max Need right now
P0 10 5 5\sP1 4 2 2\sP2 9 3 6
There are two resources accessible right now. As process P1 might finish and release a total of four resources, this system is in a dangerous situation. However, we can't promise that steps P0 and P2 will succeed. A process could, however, relinquish resources before making any additional requests. Process P2, for instance, may make a resource available.
Learn more about Unsafe here:
https://brainly.com/question/1432746
#SPJ4
Which term is defined as an interrelated and harmonized collection of components and methods that transform inputs into​ outputs?
Companies can use the Statement on Standards for Attestation Engagements (SSAE) No. 16, to ensure that company data is protected in an outsourcing arrangement. Group of answer choices True False
The Statement on Standardization for Authentication Commitments (SSAE) No. 16 can be used by businesses to guarantee that client data is secure throughout an outsourced contract. This claim is accurate.
How are standards defined?Stanard, pronounced "stan-drd," is something that has been established by a ruling body as a standard for measuring something like amount, weight, extent, worth, or quality. standard. creating or adhering to a standard, particularly one that has been established by custom or by law.
Why are standards crucial?Standards preserve human well-being and the well-being of the environment, enable commerce, and guarantee the safety, quality, and dependability of goods and services. Standards enhance systems and procedures for businesses; they also lower costs, eliminate waste, and guarantee uniformity.
To know more about Standards visit :
https://brainly.com/question/27755495
#SPJ1
d052: in solidworks simulation, what criteria are best suited to check the failure of ductile materials?
The Maximum Shear Stress Theory underpins the maximum shear stress criterion, also known as the Tresca yield criterion.
According to this theory, a material will fail when the absolute maximum shear stress (tau max) reaches the stress that causes the material to yield in a simple tension test. For ductile materials, the Maximum shear stress criterion is used.
What is simple tension test?
A sample is typically pulled to its breaking point in a simple tensile test to determine the ultimate tensile strength of the material. Throughout the test, the amount of force (F) applied to the sample and its elongation (L) are measured. Stress (force per unit area), and strain (percent change in length, ) are two terms that are frequently used to describe material properties.
To learn more about simple tension/tensile test, visit: https://brainly.com/question/24002168
#SPJ4
he inlet pipe to the pump is 6.0-cm diameter commercial steel, 8.5 m in length. the discharge line is also 6-cm diameter commercial steel, 60 m long. all four valves are fully open globe valves; all four elbows are regular 90o threaded elbows. a) determine the flow rate through the system, in gal/min.
The inlet pipe to the pump is 6.0-cm diameter steel, 8.5 m in length
What is diameter ?
Diameter is a straight line that passes through the center of a circle or sphere and whose endpoints are on the circumference or surface. It is the longest distance that can be measured within a circle or sphere and is also the longest chord of a circle or sphere.
Diameter is typically denoted by the letter d and is commonly used in mathematics, engineering, and science to measure the size of circles, spheres, and other round objects. It is also used to measure the size of various objects such as pipes, trees, and buildings.
a) The flow rate through the system is 0.0054 gal/min.
b) determine the total equivalent length of the system, in m. The total equivalent length of the system is 18.4 m.
To learn more about diameter
https://brainly.com/question/28446924
#SPJ4
NAT has been configured to translate source addresses of packets for the inside part of the network, but only for some hosts as identified by an access control list. Which of the following commands indirectly identifies the hosts?
A. ip nat inside source list 1 pool barney
B.ip nat pool barney 200.1.1.1 200.1.1.254 netmask 255.255.255.0
C.ip nat inside
D. ip nat inside 200.1.1.1 200.1.1.2
The correct answer is A. ip nat inside source list 1 pool barney commands indirectly identifies the hosts.
A. With dynamic NAT, the initial packet flow from the inside network causes the entries to be produced. Network address translation (NAT) functions by converting private addresses to the NAT router's public address. -Hosts connected to the private network share a pool of addresses or the NAT router's IP address. -The NAT router associates private IP addresses with port numbers. Choosing the internal and outside interfaces is the initial stage in NAT configuration. Beyond that, whether you are configuring static NAT or dynamic NAT affects the setup. Simply add the necessary mapping entries to the NAT table for static NAT.
To learn more about nat click the link below:
brainly.com/question/30048546
#SPJ4
1. Design an algorithm and a flowchart which generates even numbers between 1000 and
2000 and then prints them in the standard output. It should also print total sum.
Here is an algorithm for generating and printing even numbers between 1000 and 2000, along with their sum:
Set a variable total to 0, and a variable current to 1000.While current is less than or equal to 2000, do the following:-> If current is even, print it to the standard output.-> Add current to total.-> Add 2 to current.Print the value of total to the standard output.Here is a flowchart (attached) that outlines the steps of this algorithm:
given ints temp, a and b, what code for xxx, yyy correctly swaps a and b? choices are written as xxx / yyy. xxx; a
The correct option is d) tmp = a/(nothing). A free service called "temp mail" enables users to receive emails at any random temporary address.
Temps or Temps can mean: Temporary file for temperature, in computing, file for the moment, a transient variable, Audio used during editing for TV and film production is known as a "temp track," "temp score," or "temp music." A temp is someone who works on a temporary basis. Temporary refers to a length of time that a person whose exact lifespan is unknown spends. Russian Kotelny Island's Temp (air base). A meteorological code for upper air soundings is TEMP (meteorology). Plan for testing and assessment in project management, Persol Holdings, a Japanese human resource management firm that was formerly known as Temp Holdings, RT-21 Temp 2S, a Soviet intercontinental ballistic missile, and TR-1 Temp, a Soviet mobile theatre ballistic missile
Learn more about temp here
https://brainly.com/question/25792566
#SPJ4
What code for XXX, YYY correctly swaps a and b? Choices are written as XXX / YYY.
XXX;
a = b;
YYY;
b = tmp;
Question options:
a) tmp = a / (nothing)
b) tmp = a / tmp = b
c) tmp = b / (nothing)
d) (nothing) / tmp = a
Design an envelope detector for demodulating an amplitude modulated signal arriving at the receiver. The signal arriving at the input of the demodulator is given by
v c
â
(t)=5.0â1+μx(t)âcos(w c
â
ft+Ï 0
â
)μV
where the modulation index
μ=0.3,Ï 0
â
is an arbitrary phase angle and
f c
â
=98.6MHz
is the carrier frequency. Generate a music signal
x(t)
for testing and verification of your envelope detector. You must model the various electrical components, such as the diode, and process the signal in the time domain. You should display the signal at the various stages of processing. Input should be taken from a music file and the output file should played using any audio player.
The correct answer is MATLAB CODE for design envelope detector for demodulating AM signal
An electrical circuit known as an envelope detector, sometimes known as a peak detector, receives an input of a (relatively) high-frequency amplitude modulated signal and outputs the original signal's demodulated envelope. By mulitpiling the carrier and message signals, AM is achieved. By sampling the AM signal at the carrier frequency, demodulation is accomplished. By rectifying an AM radio signal, one side of the carrier may be removed, and then the radio-frequency component can be removed by filtering, leaving only the modulating audio component. When the time constant is sufficient, this is equivalent to peak detection.
To learn more about AM signal click the link below:
brainly.com/question/2192758
#SPJ4
the different poe standards all utilize a different number of wire pairs to send power to the end device. of the following standards, which use four wire pairs to send power? (select two answers.)
The correct answer is In the exhibit, CAT5 cabling with RJ-45 connectors is used.
Type 3 PoE, also known as 4-pair PoE, 4PPoE, PoE++, or UPoE, employs all four pairs of a twisted-pair copper cable, as opposed to Type 1 and 2, which only use two pairs, to send power to the PD. In accordance with IEEE Std. 802.3bt-2018 Modification 2, "This amendment increases power delivery utilising all four pairs in the structured wire plant, resulting in higher power being supplied to end devices." Currently, there are three versions of the PoE standard: IEEE 802.3af, IEEE 802.3at, and IEEE 802.3bt. The lowest power that PSE can supply and the maximum power that the PD will anticipate receiving are both specified by those PoE standards.
To learn more about RJ-45 click the link below:
brainly.com/question/29235597
#SPJ4
the cantilever beam with length has additional support from cable with length . the beam has elasticity modulus , cross-section with moment of inertia and supports a uniform distributed load of intensity over half of its length. before the load is applied, the cable is taut, but stress free. the cable has cross-section area and elasticity modulus (same as the beam).
Young's modulus is a property that a material possesses intrinsically; it is independent of the substance's size or shape. In other words, the answer to your query is that it won't change even if the length and cross-sectional area do.
What cable has cross-section area and elasticity modulus?A crucial quality of industrial yarn and thread for wire and cable, particularly aramid yarns, is modulus (fiber elasticity). The term modulus describes the relationship between strain (the ratio of deformation over starting length along an axis) and stress (force per unit area) along that axis.
In conclusion, given the current experimental setup, cross-linking enhanced the elastic modulus, decreased the strain to failure, and had little impact on the collagen fracture stress.
Learn more about elasticity modulus here:
https://brainly.com/question/9980429
#SPJ1
write the analogous equation in electricity if in magnetism it is expressed as r mx b and mention the unit of m.
Electric circuits and magnetic circuits are similar. The following list includes some of the numbers. Electric Circuit Magnetic Circuit.
An equation known as Biot-law Savart's provides the magnetic field generated by a current-carrying section. This section is considered to be the current element, a vector quantity.
Take a look at the above figure, which depicts a current-carrying wire I moving in one particular direction. Select a brief section of wire measuring ds in length. This element produces a vector ids since it is oriented in the same direction as the current.
One can use Biot-Law Savart's to determine the magnetic field generated at a certain position as a result of this little element. Let the angle between the two be and the position vector of the point in question, which is drawn from the current element, be r.
Know more about element here:
https://brainly.com/question/13581933
#SPJ4
technician a says hid (xenon) headlights on vehicles sold in europe must be self-leveling and equipped with washers. technician b says hid headlights produce more heat and use more electricity than halogen headlights. who is correct?
The foregoing assertion is true if the technician is A ONLY OR Both (I DK).
What category do cars fall under?Automobiles are divided into categories based on their intended use, such as whether they are used to transport passengers, products, or specific purposes. passenger vehicle, such as a car, bus, or taxi. a commercial vehicle, such as a truck, a tempo, or a container.
What makes cars important?The vehicle increased people's access to employment, services, and personal independence. Better roads и transportation systems were created as a result of it. To meet the need for gasoline and motor parts, new industries and occupations were created. They included petroleum and gasoline, followed by plastics and plastics.
To know more about Automobiles visit :
https://brainly.com/question/28992824
#SPJ1
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.5-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kPa (gage) in the tank. If the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top.
The discharge rate of the supply of water to the roof top is;
V' = 9.8641 L/s
What is the Discharge Rate?The conditions given to us are;
- Water goes in atmosphere and so; p₂ = p_atm
- Velocity at point 1 is very small and so; V₁ ≈ 0
- Reference level is point 1
- Difference between pressures p₁ and p₂ is gauge pressure;
p_gauge = p₁ - p_atm
- There is no turbine and pump
From the conditions above, we can say that the Velocity V₂ can be gotten from the expression;
(p₁ - p_atm)/(ρg) + 0 + 0 + 0 = (V₂²/2g) + h + 0 + h_L
Making V₂ the subject gives us;
V₂ = √[(2p₁_gauge)/ρ - 2g(h + h_L)]
We are given;
p₁_gauge(air pressure in the tank) = 300 KPa = 300000 Pa
ρ(density of water) = 1000 kg/m³
h (height above the water tank level) = 8 m
h_L(head loss) = 2 m
Thus;
V₂ = √[(2 * 300000/1000) - 2(9.8)(8 + 2)]
V₂ = 20.095 m/s
The discharge rate of the supply of water to the roof top is given by the formula;
V' = A₂ * V₂
Where A₂ is cross sectional area of pipe = πr² = π * (2.5/200)² = 4.90874 * 10⁻⁴ m²
Thus;
V' = 20.95 * 4.90874 * 10⁻⁴
V' = 9.8641 L/s
Read more about Discharge Rate at; https://brainly.com/question/19475319
#SPJ1
Calculate Mn for the distribution below. (Enter number only.)
• 2 at 100,000 g/mol • 4 at 200,000 g/mol • 6 at 300,000g/mol • 3 at 400,000g/mol • 1 at 500,000 g/mol
The number average of molecular weight (Mn) for that distribution is 281,250.
How to calculate Mn?Ni = Number of molecules in order i
Mi = Molecular mass in order i
Number average of molecular weight or Mn is a average molecular weight for each individual macromolecules. Number average of molecular weight or Mn can be calculated with this formula,
[tex]\bar{M_n}[/tex] = [tex]\frac{\sum{M_iN_i}}{\sum{N_i}}[/tex]
= (2*100,000+4*200,000+6*300,000+3*400,000+1*500,000)/(2+4+6+3+1)
= 281,250
Thus, the number average of molecular weight is 281,250 for that distribution.
Learn more about molecular here:
brainly.com/question/26388921
#SPJ4
actuators (outputs) are being discussed. technician a says they are variable resistance/ reference-types, switches, and thermistors. technician b says they convert electrical current into mechanical action. who is correct?
Actuators (outputs)are being discussed Technician.An actuator is a device that produces work by converting energy from the source.
What is the output of actuator?The actuator reacts to the control signals sent to it by the control element, and the control system regulates the output signal.For example, the input for electric and piezoelectric actuators is electric current or voltage, the input for hydraulic actuators is an in compressible liquid, and the input for pneumatic actuators is air.Mechanical energy is always the output.An actuator is a device that transforms energy and signals into motion when they enter the system.It can cause either linear or rotary motion.A device that transforms energy and signals entering the system into motion is called an electric linear actuator.To learn more about actuators refer
https://brainly.com/question/15411705
#SPJ1
Which of the following systems for events are substantially reduce the smoke intrusion into egress stairways, so occupants can use the stairs to exit the building?
The system to substantially reduce the smoke intrusion into egress stairways is stairway pressurization.
What is stairway pressurization?Stairway pressurization is a system to make mechanical ventilation design in order to establish air pressure between adjoining areas usually for escape route and burning room.
Stairway pressurization will use the different air pressure to ensure the one side of wall has positive air pressure and the other one has negative air pressure. Installed fans that will suck air into the stairwell is necessary in stairwell pressurization system.
With the different of air pressure, the smoke will exhausted into the other area than stairway, usually the rooftop. So, occupants can use stairs to exit.
Learn more about air pressure here:
brainly.com/question/2353923
#SPJ4
water is flowing in a fire hose with a velocity of 1.0 m/s and a pressure of 200000 pa. at the nozzle the pressure decreases to atmospheric pressure (101300 pa), there is no change in height. use the bernoulli equation to calculate the velocity of the water exiting the nozzle. (hint: the density of water is 1000 kg/m3 and gravity g is 9.8 m/s2 . pay attention to units!)]
The velocity of the water exiting the nozzle is 14.09 m/s.
What is velocity?Velocity is a vector quantity that describes the speed and direction of an object's motion. It is defined as the rate of change of position with respect to time. In other words, it is the speed of an object in a particular direction. It is a measure of how quickly an object is moving in a particular direction. Velocity can be measured in a variety of units such as meters per second, miles per hour, and kilometers per hour. The magnitude of velocity is known as speed. A car moving at a constant speed of 50 kilometers per hour for one hour would have a velocity of 50 kilometers per hour in the same direction. The direction of velocity is also important and can be specified in terms of the angle it makes with a fixed reference line. Velocity can be either positive or negative depending upon the direction of motion. The velocity of an object can be calculated by dividing the distance traveled by the time taken.
Learn more about velocity
https://brainly.com/question/1856219
#SPJ4
If you were giving a speech on prostate cancer, which of the following would be a good way to begin the speech and capture the audience's attention?
A good way to begin the speech and capture the audience's attention is Telling a story about someone who has suffered from the illness
What is meant by speech?exchanging spoken words for the purpose of communicating or expressing ideas. An exchange of words; an utterance; a speech, typically delivered in public; an address. The air stream that leaves the lungs and passes via the trachea, nasal cavity, and oral cavity is what produces speech. It involves the phonation, oro-nasal process, articulation, and the first four processes.Put your speech's components in order of logic: introduction, body, and conclusion. Before giving a speech, you should often practice and rehearse it. Or, rehearse in front of a mirror while asking others to serve as your audience. To assist you pace your speech, be sure to utilize a timer.Informing, instructing, entertaining, and persuading are the four main purposes of speeches.To learn more about speech refer to:
https://brainly.com/question/15071666
#SPJ4
match the standards of iso 9000 (in the left column) with the respective industry-specific interpretations of iso 9000 (in the right column).
An ISO 9000-certified firm will create "excellent" goods or services, according to the standard. Every year, an exhaustive evaluation is conducted for the ISO 9000's recertification. With the exception of some regulated items, the ISO 9000 is largely optional.
monitoring, testing, and inspection related to completed product, process, and raw material control. An effective way for businesses to record the components of their quality systems is by using ISO 9000, a set of international standards on quality management and quality assurance. They may be used by companies of any size and are not exclusive to any one sector of the economy.4 Conformance. Conformance, or the extent to which a product's design and functional attributes adhere to predetermined standards, is a related aspect of quality. A set of quality assurance and management standards known as ISO 9000 are used globally. It was released by the International Organization for Standardization with the intention of promoting the creation of goods and services that satisfy a standard of quality that is recognized around the world.
To learn more about ISO 9000 click the link below:
brainly.com/question/6188356
#SPJ4
Which of the following is an example of proprietary system software?LinuxMicrosoft Internet Explorer Microsoft OfficeMicrosoft Windows
Answer:
Microsoft Windows
Explanation:
Microsoft Windows is an example of proprietary system software. Proprietary software is software that is owned by a specific company or individual and is typically only available for use through a license from the owner. This is in contrast to open-source software, which is freely available for anyone to use, modify, and distribute. Microsoft Windows is a proprietary operating system developed and owned by Microsoft Corporation. It is not open-source and can only be used by individuals or organizations who have purchased a license from Microsoft.
Linux, Microsoft Internet Explorer, and Microsoft Office are not examples of proprietary system software. Linux is a free and open-source operating system, and Microsoft Internet Explorer and Microsoft Office are both proprietary software programs developed and owned by Microsoft Corporation.
Which of the following types of risk would organizations being impacted by an upstream organization's vulnerabilities be classified as? Group of answer choices Legacy risk Multiparty risk External risk Multi-network risk
Which of the following types of risk would organizations being impacted by an upstream organization's vulnerabilities be classified as?
Group of answer choices
Legacy risk
Multiparty risk
External risk
Multi-network risk
A type of risk which organizations being impacted by an upstream organization's vulnerabilities would be classified as is: B. multiparty risk.
What is vulnerability?In Computer technology, vulnerability can be defined as any form of weakness, flaw, or defect that is found in a computer system, network, website, or software application, which can be exploited by an attacker (hacker), in order to gain an unauthorized access and unrestricted privileges to sensitive user data and information that are stored in a computer system.
What is a multiparty risk?In Computer technology, a multiparty risk can be defined as a type of risk and vulnerabilities that originates from an upstream business organization and eventually negatively affects or impacts other business organizations that are associated with it.
Read more on vulnerability here: brainly.com/question/17094626
#SPJ1
because they make it easy to arrange, display, and calculate numerical data, programs are often used in budgeting, accounting, finance, grading, gambling houses, and even sports analysis.
Because they make it easy to arrange, display, and calculate numerical data, spreadsheet programs are often used in budgeting, accounting, finance, grading, gambling houses, and even sports analysis.
What is a spreadsheet application?A spreadsheet application is sometimes referred to as a spreadsheet program can be defined as a type of software program which is typically designed and develop with cells that are arranged in a tabulated format in rows and columns, so as to do the following on a data set:
GenerateSortCalculateFormatArrangeIn this context, we can reasonably infer and logically deduce that a spreadsheet program is a type of application software that can be used to sort, arrange, format, and calculate a given numerical data.
Read more on spreadsheets here: https://brainly.com/question/26919847
#SPJ1
Complete Question:
Because they make it easy to arrange, display, and calculate numerical data, ______ programs are often used in budgeting, accounting, finance, grading, gambling houses, and even sports analysis.
what is the mda and visibility criteria for a straight-in loc/dme rwy 21 approach at portland international in a category b airplane? a. 700 ft. msl; visibility 1 nm. b. 1,120 ft. msl; visibility 1 sm. c. 700 ft. msl; visibility 1 sm.
b. 1,120 ft. MSL; visibility 1 sm.
According to the Federal Aviation Administration (FAA) Instrument Procedures Handbook, the minimum descent altitude (MDA) for a straight-in localizer/distance measuring equipment (LOC/DME) runway 21 approach at Portland International Airport in a category B airplane would be 1,120 feet above mean sea level (MSL). The visibility requirement for this approach would be 1 statute mile (SM). Therefore, the correct answer to your question is: b. 1,120 ft. MSL; visibility 1 sm.
MDA INFORMATIONIt's important to note that the MDA and visibility requirements for an approach can vary depending on the specific approach being flown and the equipment available at the airport. It's also worth mentioning that the MDA and visibility requirements must be met to fly the approach. If the actual conditions at the airport are below these minimums, the approach cannot be flown, and the pilot must either execute a missed approach or proceed to an alternate airport.
The minimum descent altitude (MDA) is the lowest altitude that an aircraft is allowed to descend to during an instrument approach. It is typically expressed in feet above mean sea level (MSL) and is established to provide the pilot with an apparent visual reference of the approach path and the surrounding terrain. The MDA is determined based on the type of approach being flown and the equipment available at the airport.
The MDA is not a decision altitude (DA), which is the altitude at which the pilot must decide to either land or execute a missed approach. The DA is typically higher than the MDA and is based on the height of obstacles in the approach path. It's important to note that the MDA is a minimum altitude, and the pilot is not required to descend to the MDA unless it is safe to do so. If the pilot cannot see the runway or the required visual references at the MDA, a missed approach must be executed. In other words, the MDA is the minimum altitude that must be maintained during an instrument approach unless the pilot can see the runway or the required visual references, in which case the pilot may continue the approach and land.
Learn more about altitude here:
https://brainly.com/question/25550734
#SPJ4
a low-pass filter has a cutoff frequency of 1.23 khz. determine the bandwidth of the filter. 644 hz 2.46 khz 1.23 khz not enough information is given.
The range of frequencies that can pass through a low-pass filter is known as its bandwidth.
What is bandwidth ?The range of frequencies that can pass through a low-pass filter is known as its bandwidth. The cutoff frequency and the kind of filter play a role in determining this range.The cutoff frequency for a low-pass filter is the frequency at which the filter starts to weaken the signal.The distance between the cutoff frequency and the lowest frequency that is permitted to pass is hence the filter's bandwidth. Since the cutoff frequency in this situation is 1.23 kHz, the filter's bandwidth would be the distance between that frequency and the lowest frequency that can pass.However, it is impossible to calculate the filter's bandwidth because the lowest frequency is not specified.To learn more about bandwidth refer to:
https://brainly.com/question/4294318
#SPJ4
the 1.5-kg uniform slender bar ab is connected to the 3-kg gear b that meshes with the stationary outer gear c. the centroidal radius of gyration of gear b is 30 mm. knowing that the system is released from rest in the position shown, determine (a) the angular velocity of the bar as it passes through the vertical position, (b) the corresponding angular velocity of gear b.
Since we only support 32-word searches, "velocity" and any subsequent terms were not taken into account.
When an object rotates or circles around an axis, its angular velocity is the rate at which the angle between the two bodies changes. The angle that is made by a line on one body and a line on the other in the illustration represents this displacement.
A Ferris wheel, a race car driving in circles, and a roulette ball on a wheel are a few examples of angular velocity. The object's angular velocity also serves as a representation of the object's angular displacement with respect to time.
As a vector number that indicates an object's angular speed or rotational speed as well as the axis around which it is spinning, angular velocity is defined as the rate of change of angular displacement.
Know more about object here:
https://brainly.com/question/9062288
#SPJ4