Jimi is pushing a large cart at work toward the left side of the store using 10N of force. His friend Jonah comes up and pushed the cart with 8 N of force toward the right side of the store. What is the net force and direction of the cart

The weight of the car on the 12 degree slope is 546.72 lbs. This weight is important to know for various reasons, such as calculating the amount of force and energy required to move the car up the hill.

The weight of a car on a 12 degree slope can be calculated using the formula:

Weight = Force * sin(Slope Angle)

Therefore, the weight of the car on the 12 degree slope can be calculated as follows:

Weight = 650 lbs * sin(12°)

Weight = 546.72 lbs

The weight of a car on a 12 degree slope is important to know for various reasons. For example, if the car is being driven up the slope, it is important to know the weight of the vehicle to ensure that it will be able to make it up the hill. Additionally, knowing the weight of the car on the slope can help engineers and designers to calculate the amount of force and energy required to move the car up the hill.

Learn more about weight at :https://brainly.com/question/14958701

#SPJ4

The left side of the can receives a negative charge from the positively charged rod, which creates a force of attraction between both the rod and the can.

In science, the term "force" has a particular definition. At this point, describing a force as pushing or pulling is quite acceptable. A force does not "exist in an object" or "contain an object." One object experiences a force from another. Living organisms and inanimate objects are both included in the concept of a force.

A force is either a push or a pull, and it has an impact on our everyday lives because without it, we couldn't open and close things, lift our arms and legs, or do much of anything else.

To learn more about force visit:

https://brainly.com/question/13191643

#SPJ4

a) Angular frequency is  12.75 rad/s b)  The wave number is 33.59m c)

y ( x ,t) = 2.34  x  sin(33.59 x - 12.75t)

Given,

wavelength = λ = 18.7 cm

                   = 0.187 m

amplitude , A = 2.34 cm

v = 0.38 m/s

A) angular frequency = ?

f = v/λ

f = 0.38/1.87 = 2.03

angular frequency ,

ω = 2π f

ω = 2π x 2.03

ω = 12.75 rad/s

B) the wave number,

K = 2π/λ = 33.59m

c) as the wave is propagating in -x direction, the sign is positive between x and t

y ( x ,t) = A sin(k  x - ω t)

y ( x ,t) = 2.34  x  sin(33.59 x - 12.75t)

Learn more about angular frequency here:

https://brainly.com/question/14244057

#SPJ4

With the sign in front of you, you are waiting in short formation for an intersection taxiing on runway 8. In order to depart from runway 8, you should turn left as you enter the runway.

In contrast to towing or pushback, where the aircraft is moved by a tug, taxing (sometimes written taxying) is the movement of an aircraft on the ground under its own power. Although the name refers to vehicles with wheels most often, it also covers vehicles with skis or floats.

Taxiways are used by airplanes to go between locations on an airport, such as from a hangar to the runway. The takeoff roll and landing rollout, which are the accelerating run and descending run along a runway, respectively, before takeoff and landing, respectively, are not referred to as "taxiing."

Learn more about taxiing here:

https://brainly.com/question/15206908

#SPJ4

1.75 m/s2 is the crate's acceleration.

mass=25kg, f=20n.

A surface is said to be frictionless if it has a force acting on any thing that is practically zero or insignificant, meaning that there is no resistance between the surface and the material, allowing the object to slide and move freely without any friction.

Every every activity that requires the interaction of two surfaces and motion involves friction, with the exception of space walks, which you may conduct without any resistance. Because there won't be any contact force to propel the individual forward, one cannot walk in the absence of friction.

To know more about Frictionless visit:

https://brainly.com/question/26515803

#SPJ4

The Young's Modulus of the wire of length 50 cm is 4.0×10⁵ N/m.

Young's modulus is a measure of the ability of a material to withstand changes in length when under lengthwise tension or compression.

To calculate the young's modulus of the wire, we use the formula below.

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Hence, the Young's Modulus is 4.0×10⁵ N/m.

Learn more about young's modulus here: https://brainly.com/question/28757637

#SPJ1

A) 13.2 m, The snowmobile moves at a constant speed when the drive force is engaged; as the acceleration is zero, there is no net force. On the other hand, the net force is the product of two forces acting on the snowmobile: the driving force, F, and the frictional force, Ff: F-Ff=0, Ff=F.

(b) 4.2 s, The relationship between the snowmobile's acceleration and time t is given by: a=v-u/t, The time it takes the snowmobile to stop is 4.2 seconds after rearranging for t and entering numbers.

The simplest definition of magnitude in physics is "distance or quantity." In either an absolute or relative meaning, it displays the size or motion of an object.

To know more about Magnitude visit:

https://brainly.com/question/29766788

#SPJ4

In a proton density image the tissue magnetization, RF signal intensity, and image brightness are.

Proton Mail is the world's largest cozy e-mail provider. It gives end-to-cease encryption and plenty of different splendid safety capabilities to maintain your communications non-public. Even the company hosting your emails has no manner of reading them, so you can rest confident that they cannot be studied via third events either.

It has a completely, very wealthy internal shape. you could have heard that protons are made up of 3 smaller basic particles known as quarks, two united states, and one down quark to be particular, but it is only the top of the particle iceberg, as proton researcher Paul Reimer explains.

One or extra protons are present in the nucleus of every atom. They provide the attractive electrostatic crucial force which binds the atomic electrons. The quantity of protons in the nucleus is the defining belongings of an element and is referred to as the atomic quantity.

Learn more about proton here:-https://brainly.com/question/1805828

#SPJ4

The angle of refraction of the ray of light entering the Diamond is 16.8°.

The diamond from the water at an angle of 21.2 degrees to the normal.

According to the law of refraction, the ratio of the sign of the angle of incidence and the angle of refraction of the ray of light is constant.

Sin i/Sin r = n

n is the refractive index of the material in which the light is entering.

The refractive index of the Diamond is 2.42.

Putting all the values,

Sin(21.2°)/Sin(r) = 2.42

0.71/Sin(r) = 2.42

Sin(r) = 0.71/2.42

Sin(r) = 0.29

r = Sin inverse (0.29)

r = 16.86°

So, the angle of refraction is found to be 16.86°.

To know more about angle of refraction, visit,

https://brainly.com/question/12469161

#SPJ4

The magnitude of the boat’s acceleration while it travels 12.0 m is b. 2.5 [tex]ms^{-2}[/tex]

u= 9.5 [tex]ms^{-1}[/tex]

v= 5.5 [tex]ms^{-1}[/tex]

s= 12 m

From the given data we can use,

[tex]v^{2} -u^{2} =2as[/tex]

to calculate acceleration.

[tex]v^{2} -u^{2} =2as[/tex],

Where,

v is the final velocity,

u is the initial velocity,

a is the acceleration and

s is the distance covered.

Substituting the values we have,

[tex]v^{2} -u^{2}[/tex]= 2×a×s

[tex](5.5)^{2}[/tex] - [tex](9.5)^{2}[/tex]= 2 ×a×12

a= [tex]\frac{(5.5)^{2} -(9.5)^{2}}{(2)(12)}[/tex]

a= [tex]\frac{(30.25)^{2} -(90.25)^{2}}{(24)}[/tex]

a=[tex]\frac{-60}{2000}[/tex]

a=-2.5 [tex]ms^{-1}[/tex]

(The negative sign says that it is a negative acceleration  )

Therefore the magnitude of the boat's acceleration is -2.5 [tex]ms^{-1}[/tex]

To know more about Acceleration refer here:

https://brainly.com/question/12550364#

#SPJ4

If you placed 1.00 coulomb (C) of positive charge on the Earth and 1 C of negative charge 384,500 km away on the Moon, the positive charge on the Earth would experience a gravitational force of attraction towards the negative charge on the Moon.

The gravitational force of attraction between two charged particles is given by the formula:

where F is the gravitational force, k is the Coulomb constant, q1 and q2 are the charges of the two particles, and r is the distance between them.

Plugging in the values provided, we get:

F = (8.99 x 10^9 N*m^2/C^2) * (1 C) * (1 C) / (384,500 km)^2

= 2.34 x 10^-9 N.

This is a very small force due to the large distance between the two charges and the relatively small magnitude of their charges.

Learn more about The gravitational force here:

https://brainly.com/question/27943482

#SPJ4

When a hockey puck with a momentum of 5 kg-m/s is struck by a hockey stick, it receives an impulse of 100 N.

The force of friction is the imbalanced force in the situation of an already moving object (such as a puck sliding on an ice surface). In this situation, the puck's acceleration (slowing) is proportional to the amount of friction. More friction causes the puck to slow down faster. According to Newton's third law of motion, every action has an equal and opposite response. When a player is skating, for example, his skates push off the ice, causing an opposing reaction that propels the player ahead and increases his speed.

Learn more about acceleration here-

https://brainly.com/question/12550364

#SPJ4

The bug's maximal kinetic energy changes as 16 times of Kinetic energy before amplitude increases when the amplitude approaches 0.20 mm.

The amplitude of a wave is its largest displacement. The wave's greatest velocity is now expressed as its amplitude, which is: v =Aw= K/M.

Now, the square of the wave is directly proportional to the kinetic energy of a system. As a result, the wave's maximum kinetic energy is given by KE = k/2A^2, which means that

KE1/KE2 = A1^2/A2^2 where KE1 is the kinetic energy prior to the amplitude (A1) increasing and KE2 is the kinetic energy following the amplitude increasing (A2)

Due to that,

The bug's entire vertical journey was S = 0.10m

The wave's amplitude is equal to half of the whole distance from the top to the bottom, hence its value is (A) = S/2 = 0.1/2 = 0.05m.

Now that the wave's amplitude has increased to 0.20 m, KEA = KE1/KE2 = A1^2/A2^2

KE1/KE2 = (0.05)^2/(0.20)^2, which equals 0.0025/0.04 = 0.0625.

KE2 then equals 16KE1

Therefore, the largest change in kinetic energy is (KE2) = 16KE1.

​To learn more about kinetic energy click here https://brainly.com/question/26472013

#SPJ4

Find complete question:  A bug on the surface of a pond is observed to move up and down a total vertical distance of 0.10 m, lowest to the highest point, as a wave passes. What is the amplitude of the wave? If the amplitude increases to 0.20 m, by what factor does the bug's maximum kinetic energy change?

The best explanation why the box’s final kinetic energy is less than its initial potential energy is that some potential energy was converted into thermal energy due to friction.

option B is the correct answer.

The law of conservation of energy states that energy can neither be created nor destroyed but can be converted from one form to another.

According to law of conservation of energy, we have the following energy conversion process.

In absence of friction, the potential energy of the box at the top of the ramp is equal to the kinetic energy of the box at the bottom of the ramp.

In the presence of friction, some  potential energy will be converted into thermal energy due to friction and the final kinetic energy will be smaller than the initial potential energy.

Learn more about conservation of energy here: https://brainly.com/question/166559

#SPJ1

Answer:

The answer above is correct (I just did it on Edge.) - It's option B!

Explanation:

Hope this helped - brainliest would be greatly appreciated!

Have a great day :D

The incident beam of light has a single, monochromatic wavelength. When this beam is absorbed by the hydrogen atoms, the atoms become excited and eventually relax back to the ground state, emitting light at several different wavelengths.

(a) It is not possible to determine the wavelength of the incident beam based on the information provided.

(b) The longest wavelength in the emission spectrum of the hydrogen atoms corresponds to the transition between the lowest energy levels in the atom. In the case of hydrogen, the ground state is the lowest energy level, so the longest wavelength would correspond to a transition from an excited state to the ground state.

(c) The portion of the electromagnetic spectrum to which the longest wavelength belongs depends on the specific value of the wavelength. The electromagnetic spectrum includes radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays.

(d) The series to which the longest wavelength belongs can be determined by the values of the energy levels involved in the transition. In the case of hydrogen, there are three series: the Lyman series, the Balmer series, and the Paschen series. The Lyman series corresponds to transitions from higher energy levels to the ground state, the Balmer series corresponds to transitions from intermediate energy levels to the ground state, and the Paschen series corresponds to transitions from lower energy levels to the ground state.

(e) The shortest wavelength in the emission spectrum corresponds to the transition between the highest energy levels in the atom. In the case of hydrogen, the shortest wavelength would correspond to a transition from an excited state to a higher energy level.

(f) The portion of the electromagnetic spectrum to which the shortest wavelength belongs depends on the specific value of the wavelength.

(g) The series to which the shortest wavelength belongs can be determined by the values of the energy levels involved in the transition. In the case of hydrogen, the shortest wavelength would belong to the Lyman series, since it corresponds to a transition from an excited state to a higher energy level

To learn more about electromagnetic spectrum visit:https://brainly.com/question/23727978

#SPJ4

The spring constant of the spring is 7.497 N/m.

The given parameters;

mass of the block, m = 0.482 kg

extension of the spring, x = 0.630 m

additional extension, = 0.338 m

The spring constant of the spring is calculated as follow

F = mg

Kx = mg

K = mg/x

K = 0.482 × 9.8 / 0.630 = 7.497N/m

F = -kx.

The spring constant, or k, is the proportional constant. It is a gauge of the spring's rigidity. A spring exerts a force F = -kx in the direction of its equilibrium position when it is stretched or compressed to a length that deviates by an amount x from its equilibrium length. The spring constant is calculated by dividing the force required to extend or compress a spring by the length it goes up or down. It is used to assess the stability or instability of a spring, The spring's stiffness is quantified by the spring constant, or k. For various springs and materials, it differs. The stiffer the spring is and the harder it is to stretch, the greater the spring constant.

Learn more about spring constant here:

https://brainly.com/question/14159361

#SPJ4

The turning-point angles is θ = 9.666 degrees if the child has a speed of 0.80 m/s when the ropes are vertical.

As per the details provided in the above question are as bellow,

The speed at bottom = v = 0.8 m/s

The length of the rope = l = 2.3 meter

The Work Energy Theorem provides us with,

The energy an item has as a result of motion is known as kinetic energy. A force must be applied to an item in order to accelerate it. We must put forth effort in order to apply a force. After the job is finished, energy is transferred to the item, which then moves at a new, constant speed.

Change in kinetic energy = net work done

[tex]0 - 0.5mv^2 =[/tex]- mgl (1-cosθ)

[tex]0.5 \times 0.8^2[/tex] = 9.8 x 2.3 (1-cosθ)

angle θ = 9.666 degrees

For more such question on angles.

https://brainly.com/question/25770607

#SPJ4

Note:- The correct question would be as bellow,

A child swings back and forth on a swing suspended by 2.3m -long ropes.

Find the turning-point angles if the child has a speed of 0.80 m/s when the ropes are vertical.

Electric field strength at (2.1m,3.0m) = 14.914 V/m

So in order to find electric field strength at a point whose cordinate is (x,y) is given by the term E(x,y)

Given:

V=200 (V⋅m) /√(x2+y2),  

E = ∂V/∂x i + ∂V/∂y j

where i is vector along x axis whose magnitude is 1 and hence it is unit vector and j is vector along y axis whose magnitude is 1 and hence it is unit vector.

∂V/∂x  =  [tex]\frac{-200x}{(x^2+y^2)^3^/^2}[/tex]

=>  (-200*2.1)/49.11

=>   8.55

∂V/∂x  =  [tex]\frac{-200y}{(x^2+y^2)^3^/^2}[/tex]

=> (-200*3)/49.11

=> 12.22

so E(2.1,3) = -8.55 i -12.22 j

  so E = [tex]\sqrt{-8.55*-8.55 + -12.22*-12.22}[/tex]

=> [tex]\sqrt{222.43}[/tex]

=> 14.914 V/m

so the magnitude of Electric field at (2.1m,3.0m) = 14.914 V/m

To know in depth about Electric field strength click on link given below:

https://brainly.com/question/28227168#

#SPJ4

Complete question:

The electric potential in a region of space is V= 200 (V⋅m) /√(x2+y2), where x and y are in meters. Find the strength of the electric field at (x,y)=(2.1m,3.0m) ?

An under-excited generator a. absorbs reactive power from the system

In an electrical power system, generators are used to produce electrical energy by converting mechanical energy into electrical energy. Under-excited generators are generators that are operating at a voltage below their rated value. These generators are used where it is necessary to maintain a specific voltage in the electrical system. For example, in some power systems, load on the generator may vary, and generator may need to adjust its output to match the changing load.

When a generator is under-excited, it absorbs reactive power from the system, which is a type of electrical power that is not used to do work. Reactive power is required to create and maintain the alternating current in an electrical system, but it does not perform any useful work. Absorbing reactive power helps to maintain the proper voltage and frequency in the system.

Read more about generators on:

https://brainly.com/question/24158806

#SPJ4

When a ball rolls horizontally off the edge of a cliff at 4.00 m/s, then the height of the cliff is calculated as 276 m.

The motion of any object thrown or projected into the air is called projectile motion. Form of motion experienced by object that is projected in a gravitational field is called projectile motion.

d is distance ;velocity is  v= 4m/s

As, d = v t

30.0 = 4.00 t

So, t = 7.50 s

We know that, h = 1/2 g t^2

h = 1/2 (9.81) (7.5)^2

h = 275.9

Hence, h = 276 m

The height of the cliff is 276 m.

To know more about projectile motion, refer

https://brainly.com/question/24216590

#SPJ4

Answer:

Below

Explanation:

a)  At constant speed the only force acting downward is the usual Normal Force due to gravity

Fn = mg = 4.8 * 9.81 =47.1 N

                the force of friction is then Ff =  Fn * coeff = 47.1 * .28 = 13.2 N

b)  If the acceleration is UPWARD this adds to g

      Fn then becomes

             Fn = 4.8 ( 9.81 + 1.6) = 54.8 N   and    Ff = 54.8 * .28 = 15.3 N

c)  Similar to b)  but this time the acceleration of the elevator SUBTRACTS from gravity    

    Fn = 4.8 ( 9.81 - 1.6) = 39.4 N    and    Ff = 39.4 * .28 = 11.0 N

The angular acceleration is 0.01533rad/s.

We are given that,

Radius = r = 27.0cm

Speed = v = 11.2 m/s

Time = t = 24.0 s

Therefore , We shall first find the linear acceleration before calculating the angular acceleration from one of the linear motion kinematics equations and the initial velocity u will be 0.

v = u + at

a = v/t

a = (11.2m/s)/(27.0×10⁻²m)

a = 0.414 ×10⁻²m/s²

Now , calculating the angular acceleration,

a = α × r

α = a/r

α =  (0.414 ×10⁻²m/s²)/(27.0×10⁻²m)

α = 0.01533rad/s

To know more about angular acceleration

https://brainly.com/question/13824288

#SPJ4

The number of forces acting on the helicopter is 3.

The forces on the system are not balanced

The magnitude of the thrust is 7,112,5 N.

The net force of the helicopter  is 5,912.5 N

The magnitude of the helicopter's acceleration is 1.97 m/s².

The speed of the helicopter is increasing towards to the right.

The number of forces acting on the helicopter is calculated as follows;

The magnitude of the thrust is calculated as;

F = W sinθ

F = (3000 x 9.8 x sin14)

F = 7,112.5 N

The net force of the helicopter  is calculated as follows;

F (net) = drag force + thrust force

F (net) = - 1200 N + 7,112.5 N

F (net) = 5,912.5 N

The acceleration of the helicopter is calculated as follows;

F (net) = ma

where;

a = F (net) / m

a = 5,912.5 / 3000

a = 1.97 m/s²

Thus, since the acceleration of the helicopter is positive, the speed of the system is increasing towards to the right

Learn more about net forces here: https://brainly.com/question/14361879

#SPJ1

The period of motion is simple hormonic motion and the maximum speed of the particle is 0.0031s

(a) Simple harmonic motion is defined as "the motion of a mass on a spring when it is subject to the linear elastic restoring force given by Hooke's Law (F=-Kx). The motion experimented by the particle is sinusoidal in time and demonstrates a single resonant frequency".

(b) The equation that describes the simple harmonic motion is given by =

= X = Acos(ωt + θ)     [1]

And taking the first and second derivate of the equation (1) we obtain the velocity and acceleration function respectively.

For the velocity:

= V = dx/dt = -Aωsin(ωt + θ)        [2]

For the acceleration:

= A = dv/dt =  -Aω²cos(ωt + θ)           [3]

As we can see in equation [3] the acceleration would be maximum when the cosine term would be -1 and on this case:

= Aω² = 8x10³ m/s²

Since we know the amplitude A=0.002m  we can solve for ω like this:

= ω = √ (8000/0.002)

= ω = 2000 rad

And we with this value we can find the period with the following formula;

= T = 2π/ω = 0.0031s

To know more about Simple Hormonic Motion:

https://brainly.com/question/13994626

#SPJ4

The complete question:

A 10 g particle undergoes SHM with an amplitude of 2.0 mm and a maximum acceleration of magnitude 8.0 multiplied by 103 m/s2, and an unknown phase constant ?.(a) What is the period of the motion?1 s(b) What is the maximum speed of the particle?

Answer:

Scientific theories are attempts to explain how events occur in the natural world.

Explanation:

A scientific theory is an explanation for a wide range of observations and phenomena that have been tested and supported by multiple lines of evidence. A theory is not based on a single piece of evidence, but rather on a collection of evidence that has been accumulated over time through careful observation and experimentation.

Scientific theories are based on facts, which are observations of events in the natural world. However, a theory goes beyond simply describing these events; it seeks to explain why and how they occur. For example, the theory of evolution explains how organisms have evolved over time through natural selection. It is based on a wide range of evidence, including observations of the fossil record, comparative anatomy, and molecular biology, among others.

Overall, scientific theories are important tools for understanding and explaining the natural world, and they are constantly being revised and updated as new evidence becomes available.

Answer:

When two objects collide, the forces that are exerted on each other are determined by their masses and speeds. If the mass of one of the objects is increased, the force that it exerts on the other object during the collision will also increase. Similarly, if the speed of one of the objects is increased, the force that it exerts on the other object during the collision will also increase. In general, the greater the mass and speed of an object, the greater the force that it will exert on another object during a collision. However, it is important to note that the direction of the forces will remain the same, regardless of the masses or speeds of the objects involved.

Fnorm = 58.8 N; Fnorm = 58.8 N; Fapp = 15 N; Fnet = 0 N. In the case of constant velocity, a = 0 m/s/s and Fnet = 0 N, Fgrav = m • g • 9.8 m/s/s • 6 kg • 58.8 N Ffrict = Fapp = 15 N since there is no horizontal acceleration.

A book is moved across a desk with a rightward acceleration by applying a rightward push to it. Consider the effects of friction. Pass over air resistance. Static Friction = Normal Force x Static Friction Coefficient is the formula for calculating static friction.

Newton's second law of motion provides the definition of the force formula: An object's force is equal to its mass times its acceleration. F = m ⨉ a. To apply this formula, you must use SI units for force (newtons), mass (kilograms), and acceleration (meters per second squared).

to know more about force here:

brainly.com/question/26115859

#SPJ1

No two-slit interference pattern be observed when the light from the slits will not falls on a screen.

Because the condition of the interference is the distance between the slits equals or close to the wavelength of the red light. For distance of 25 cm, it is a very large distance that prevents the interference of the red light to occur. So, the answer is no.

Interference is the phenomenon where two waves combine by applying a displacement at any one point in space and time to form waves of greater, lesser or equal amplitude. Constructive and destructive interference arise from correlated or coherent wave interactions. This is because they originate from the same source or have the same or nearly the same frequency. Interference effects can be observed in all kinds of waves: light, radio waves, sound, surface water, gravity, matter waves.

Learn more about interference here : https://brainly.com/question/9655287

#SPJ4

The resistance of a conductor that carries a current of 120 amperes when the potential difference between its ends is 240 volts = 2 Ω

Electrical resistance is the force that opposes the flow of current, it's a component that can reduce the speed and quantity of the flow of electrons in an electric circuit.

The formula for electrical resistance can be seen to have several components, namely R is the resistance (Ω), V is the voltage (V), and I is the current strength (A).

The equation:

R = V/I

We have,

Current strength = 120 A

The potential difference between its ends  = 240 V

So, the resistance of a conductor that carries a current of 120 amperes when the potential difference between its ends is 240 volts:

R = 240 V / 120 A

= 2 Ω

Learn more about electrical resistance here: https://brainly.com/question/17294367

#SPJ4

If the current i(t) in the circuit at time t after the switch is closed  in terms of q0 , l , c the differential equation will be V(t) = (q0/C) × e^(−t/RC )

The equation for V(t) would be V(t)=E(RC)(dV(t)/dt) if a battery with EMF E was present in the circuit. With respect to V(t), this differential equation is no longer homogenous. But it can be resolved by simply substituting Vb(t)=V(t)E. This substitution has the effect of removing the E term and producing an equation for Vb(t) that is the same as the equation you solved for V(t). When a battery is supplied, the capacitor's initial condition is typically that it is completely discharged at time t=0.

In these circumstances, the solution will appear as V(t)=E(1et/(RC)) Since the voltage across the capacitor is zero at time t=0 according to this solution, is 0 at time t=0 since the capacitor wasn't charged at that point, and it climbs asymptotically to E.

To know more about differential equation

https://brainly.com/question/14959401

#SPJ4