The correct answer is c. 50%. Homes with Garbage disposals generate more organic waste, which can overload the septic system. Increasing the septic tank capacity by 50% can help accommodate this increased loading.
This situation was what drove Hand in Hand India (HiH India), a pan-Indian non-profit organisation that promotes sustainable development, to engage with Karaikal’s locals in changing mindsets, driving behavioural change in their waste management approach.
“Smaller towns like Karaikal lack the adequate infrastructure to process its solid waste. Along with a lack of awareness among residents, it created a huge environmental problem”, reports Amuda Shekharan from HIHI.
“As every household is generating rubbish, the success of any waste management program would depend on the behavioural and mindset change in the community.”
To know more about Garbage please click:-
https://brainly.com/question/26150463
#SPJ11
Draw a diagram for CuCl2 to show how to make the solution. Information to include…
- Mass solute = 33.6
- Moles of solute = 0.249907
- Molarity = 0.08330233
Make sure to have 3 ACCURATE steps drawn. Your drawing should only be 1 picture but include 3 steps.
3 step diagram for the preparation of 0.08330233 M CuCl₂ solution is attached below.
What is stock solution?A stock solution can best be described as a concentrated solution of known exact concentration that is diluted for future use in the laboratory. You can choose not to prepare a stock solution, but doing so can streamline your operations while saving significant time and resources in the process.
Now, following are the steps for the preparation of CuCl₂ solution:
1. Weigh out 33.6 g of CuCl₂ precisely.
2. Dissolve the weighed out CuCl₂ in some amount of distilled water and transfer it to a volumetric flask.
3. Calculate the volume of solution and add the required amount of water to make up the volume.
Molarity = moles/volume
0.08330233 = 0.249907/Volume
Volume = 0.249907/0.08330233
Volume = 2.99 L
To know more about stock solution, visit:
https://brainly.com/question/29221166
#SPJ1
Why would it have been suitable to carry out a simple distillation on the esterification rxn mixture after azeotropic distillation to separate the product from the starting materials when the BP dif. Btwn the product and the starting materials was only 9 degrees?
A simple distillation would have been suitable to carry out on the esterification reaction mixture after azeotropic distillation to separate the product from the starting materials because even though the boiling point difference between the product and the starting materials was only 9 degrees, a simple distillation could still effectively separate the two compounds.
In a simple distillation, the mixture is heated and the vapors produced are condensed and collected in a separate container. The temperature at which the compound begins to vaporize is called its boiling point, and the temperature of the vapor is typically slightly lower than the boiling point.
Therefore, if the product and starting materials have a 9-degree difference in boiling points, a simple distillation can be used to collect the product as it vaporizes at a slightly lower temperature than the starting materials.
Additionally, a simple distillation is a relatively quick and easy technique to perform, making it a suitable option for separating compounds with small boiling point differences. It is also a common technique used in laboratory settings and requires minimal equipment, further adding to its convenience. Therefore, in this scenario, a simple distillation could effectively separate the product from the starting materials despite the small difference in boiling points.
For more such questions on simple distillation, click on:
https://brainly.com/question/4917936
#SPJ11
What develops positive lift?a.) symmetrical airfoil at a zero AOAb.) NON-rotating cylinder
A symmetrical airfoil at a zero AOA develops positive lift.
A symmetrical airfoil has the same curvature on both its upper and lower surfaces, which means that the air flowing over the top and bottom of the airfoil has equal distances to travel, and therefore, produces no net lift when the angle of attack is zero. However, when the angle of attack is increased, the air flowing over the upper surface has to travel a longer distance than the air flowing over the lower surface, which results in lower pressure and higher velocity over the top of the airfoil, creating positive lift.
A non-rotating cylinder, on the other hand, does not develop positive lift. A cylinder has a circular cross-section, which means that the air flowing over the top and bottom of the cylinder has the same distance to travel and, therefore, produces no net lift even when the cylinder is placed at an angle of attack.
To learn more about surfaces, refer:-
https://brainly.com/question/1569007
#SPJ11
Potassium hydrogen phthalate, known as KHP (molar mass = 204.22 g/mol), can be obtained in high purity and is used to determine the concentration of solutions of strong bases by the reaction
HP–(aq) + OH–(aq) → H2O(l) + P2–(aq)
If a typical titration experiment begins with approximately 0.5 g KHP and has a final volume of about 100 mL, what is an appropriate indicator to use? The pKa for HP– is 5.51.
An appropriate indicator to use in this titration experiment would be phenolphthalein.
Phenolphthalein has a color change at a pH range of 8.2-10.0, which is well above the pKa of HP– (5.51). Therefore, at the endpoint of the titration, when all the KHP has reacted with the strong base, the solution should have a pH greater than 8.2, and the phenolphthalein will change from colorless to pink.
An appropriate indicator to use in a titration experiment involving potassium hydrogen phthalate (KHP) and a strong base would be phenolphthalein. Phenolphthalein changes color between pH 8.2 and 10, which is suitable for detecting the endpoint of the titration, as the pKa of HP– is 5.51 and the pH at the equivalence point would be slightly above 7 due to the reaction with the strong base.
To learn more about Phenolphthalein click here
brainly.com/question/15211751
#SPJ11
what volume of a 5 mol/L solution is required to make 3.5L of a 1.0 mol/L solution
To create 3.5 L of a 1.0 mol/L solution, 0.7 L of the 5 mol/L solution is needed.
How do you produce a 100 ml 0.5 M HCl solution?Add 0.1 ml of methyl red solution to 100 ml of water to dissolve it. While continuously stirring, slowly pour in the acid from a burette until the mixture turns a pale pink colour. To continue the titration, cool the solution after bringing it to a boil.
C1V1 = C2V2
where:
C1 = concentration of the initial solution (in mol/L)
V1 = volume of the initial solution (in L)
C2 is the final solution's concentration (in mol/L).
V2 is the final solution's volume (in L)
To solve for V1, we may rearrange the equations as follows:
V1 = (C2 x V2) / C1
Substituting the given values, we get:
V1 = (1.0 mol/L x 3.5 L) / 5.0 mol/L
V1 = 0.7 L
To know more about solution visit:-
https://brainly.com/question/30665317
#SPJ1
A 0.4550g solid mixture containing MgSO4 is dissolved in water and treated with an excess of Ba(NO3)2, resulting in the precipitation of 0.6168g of BaSO4.Find the concentration (percent) of MgSO4 in the mixture.How do you start?
a. The mass of Mg in [tex]MgSO_4[/tex] is 0.00053 g.
b. The concentration (percent) of Mg in [tex]MgSO_4[/tex] is 0.167%.
a. To determine the mass of Mg in [tex]MgSO_4[/tex] , we first need to find the number of moles of [tex]BaSO_4[/tex] that precipitated. We can use stoichiometry to relate the amount of [tex]BaSO_4[/tex] formed to the amount of [tex]MgSO_4[/tex] present in the mixture.
[tex]MgSO_4[/tex] [tex]+[/tex] [tex]Ba(NO_3)_2[/tex] → [tex]BaSO_4[/tex] [tex]+[/tex] [tex]Mg(NO_3)_2[/tex]
The balanced equation shows that 1 mole of [tex]MgSO_4[/tex] reacts with 1 mole of [tex]BaSO_4[/tex] . Therefore, the number of moles of [tex]MgSO_4[/tex] in the mixture is equal to the number of moles of [tex]BaSO_4[/tex] formed.
The molar mass of [tex]BaSO_4[/tex] is:
[tex]BaSO_4[/tex] = 137 + 32 + 4(16) = 233 g/mol
The total number of moles of [tex]BaSO_4[/tex] produced is:
n[tex](BaSO_4)[/tex] = m[tex](BaSO_4)[/tex] / M[tex](BaSO_4)[/tex] = 0.6168 g / 233 g/mol = 0.002650 mol
Since 1 mole of [tex]MgSO_4[/tex] reacts with 1 mole of [tex]BaSO_4[/tex] , the number of moles of [tex]MgSO_4[/tex] in the mixture is also 0.002650 mol.
The molar mass of [tex]MgSO_4[/tex] is:
[tex]MgSO_4[/tex] = 24 + 32 + 4(16) = 120 g/mol
The mass of Mg in the mixture is:
m(Mg) = n[tex](MgSO_4)[/tex]x M[tex](MgSO_4)[/tex] x (24 g/mol / 120 g/mol) = 0.002650 mol x 120 g/mol x (24/120) = 0.00053 g
Therefore, 0.00053 g is the mass of Mg in [tex]MgSO_4[/tex]
b. To find the concentration (percent) of Mg in [tex]MgSO_4[/tex] , we can use the formula:
concentration (percent) = (mass of Mg / mass of [tex]MgSO_4[/tex]) x 100%
The mass of Mg in [tex]MgSO_4[/tex] is 0.00053 g, as calculated in part a. The mass of [tex]MgSO_4[/tex] is:
m[tex](MgSO_4)[/tex] = M[tex](MgSO_4)[/tex] x n[tex](MgSO_4)[/tex] = 120 g/mol x 0.002650 mol = 0.318 g
Therefore, the concentration of Mg in [tex]MgSO_4[/tex] is:
concentration (percent) = (0.00053 g / 0.318 g) x 100% = 0.167% (rounded to three significant figures)
Hence, 0.167% is the concentration of Mg in [tex]MgSO_4[/tex]
For more such questions on concentration, click on:
https://brainly.com/question/28564792
#SPJ11
The probable question may be:
A 0.4550-g solid mixture containing MgSO4 and Ba(NO3)2 is dissolved in water and treated with an excess of Ba(NO3)2, resulting in the precipitation of 0.6168 g of BaSO4. a. Calculate the mass of Mg in MgSO4 b. Find out the concentration (percent) of Mg in MgSO4.
MgSO4 + Ba(NO3)2 = BaSO4+ Mg(NO3)2
Atomic masses: C=12, H=1, O=16, Ca=40, S=32, K=39, Mg=24, N=14, Ba=137
pepsin functions in the stomach that has a ph of 2.5; and trypsin functions in the small intestine that has a ph of 6.5. you have an unlabeled vial, and you know it is either trypsin or pepsin, and you determine the reaction rate under different conditions to determine which one it probably is. if the vial contains pepsin, which result below would you expect to find?
The highest reaction rate would be observed at a pH of 2.5 if the vial contains pepsin.
If the vial contains pepsin, you would expect to find the highest reaction rate at a pH of 2.5, since pepsin functions in the stomach which has a pH of 2.5. If the pH is raised to 6.5, which is the pH of the small intestine where trypsin functions, the reaction rate of pepsin would be significantly lower. The highest reaction rate would be observed at a pH of 2.5 if the vial contains pepsin.
Pepsin is the primary digestive enzyme in the stomach and is produced by the gastric gland in the stomach, whereas trypsin is produced by the pancreas and is a component of pancreatic juice. While trypsinogen, an inactive form of the enzyme, is activated by the enzyme enterokinase, pepsinogen, an inactive form of the enzyme, is activated by the HCl in gastric juice. Pepsin is an aspartic protease that uses a catalytic aspartate in its active site, whereas trypsin is a serine protease that uses a serine residue. While pepsin requires a pH of 1.8 for optimal activity (pH 7.5-8), trypsin performs best in an alkaline environment. Trypsin comes in eight different types, but pepsin only contains four: pepsin A, B, C, and D.
Learn more about pepsin here
https://brainly.com/question/29821731
#SPJ11
Which half reaction would you expect at the cathode of the Downs cell?
The cathode in the Downs cell is the electrode where reduction occurs, so we would expect the following half-reaction to occur at the cathode:
[tex]2Na^+(molten) + 2e^-[/tex] → [tex]2Na(s)[/tex]
The Downs cell is an electrolytic cell used for the electrolysis of molten sodium chloride (NaCl) to produce sodium metal and chlorine gas.
In this half-reaction, two positively charged sodium ions ([tex]Na^+[/tex]) are reduced by gaining two electrons ([tex]2e^-[/tex]) to form neutral sodium atoms (Na), which then combine to form metallic sodium (Na(s)).
At the anode of the Downs cell, oxidation occurs, and the following half-reaction occurs:
[tex]2Cl^-(molten)[/tex] → [tex]Cl_2(g) + 2e^-[/tex]
In this half-reaction, two negatively charged chloride ions ([tex]Cl^-[/tex]) lose two electrons to form chlorine gas ([tex]Cl_2[/tex]). The overall reaction of the Downs cell is the sum of the cathode and anode half-reactions:
[tex]2Na^+(molten) + 2Cl^-(molten)[/tex]→[tex]2Na(s) + Cl_2(g)[/tex]
This reaction is important for the production of sodium and chlorine on an industrial scale.
For more question on Downs cell click on
https://brainly.com/question/28303092
#SPJ11
If I initially have a gas at a pressure of 10.0 atm, a volume of 54.0 liters, and a temperature of 200. K, and then I raise the pressure to 14.0 atm and increase the temperature to 300. K, what is the new volume of the gas?
Answer:
If I initially have a gas at a pressure of 10.0 atm, a volume of 24.0 liters, and a temperature of 200. K, and then I raise the pressure to 14.0 atm and increase the temperature to 300. K, what is the new volume of the gas?
✓ The two actions work against each other. Explanation: Raising the temperature will increase the volume: $$V_T=(300K)/(200K)xx24.0L=36.0L$$ Increase
Explanation:
please give me brainliest
if we burn 33.5 grams of c4h10 with 83.2 grams of oxygen, what will the amount of heat in joules produced by the reaction? g
If we burn 33.5 grams of c4h10 with 83.2 grams of oxygen, -2,901,700 J will the amount of heat in joules produced by the reaction
To answer this question, we need to first write out the balanced chemical equation for the combustion of C₄H₁₀ with oxygen:
C₄H₁₀ + O₂ ⇒ 4 CO₂ + 5 H₂O
From the equation, we can see that 13/2 moles of oxygen are required to react with 1 mole of C₄H₁₀.
We can use this information to calculate the amount of oxygen required to react with 33.5 grams of C₄H₁₀:
33.5 g C₄H₁₀ × (1 mole C₄H₁₀ / 58.12 g C₄H₁₀) × (13/2 moles O₂ / 1 mole C₄H₁₀) × (32 g O₂ / 1 mole O₂) = 168.3 g O₂
Since we have 83.2 grams of oxygen, we have enough oxygen to completely react with the 33.5 grams of C₄H₁₀.
Now we can use the balanced equation to calculate the amount of heat produced by the reaction:
4 moles CO₂ × (-393.5 kJ/mol) + 5 moles H₂O × (-241.8 kJ/mol) = -2901.7 kJ
Converting to joules:
-2901.7 kJ × 1000 J/kJ = -2,901,700 J
Therefore, the amount of heat produced by the reaction is -2,901,700 J. Note that the negative sign indicates that the reaction is exothermic, meaning that heat is released.
Learn more about Chemical reaction here
https://brainly.com/question/28294176
#SPJ11
Question 12
The only criteria gas that is colored is:
a. Nitrogen dioxide
b. Carbon monoxide
c. Ozone d. Sulfur dioxide
The only gas among the given options that is colored is nitrogen dioxide. It is a reddish-brown gas that has a pungent odor. Nitrogen dioxide is formed due to the combustion of fossil fuels, and it is a significant air pollutant.
It is harmful to human health as it can cause respiratory problems and aggravate asthma.
The other gases in the options, carbon monoxide, ozone, and sulfur dioxide, are colorless gases.
Criteria, in this context, refers to the specific characteristics that differentiate nitrogen dioxide from the other gases in the options. One such criterion is its characteristic color. It is essential to understand the criteria that differentiate different substances to identify and classify them correctly.
In conclusion, the only gas among the options that is colored is nitrogen dioxide. It is a harmful air pollutant and is formed due to the combustion of fossil fuels. Understanding the criteria that differentiate different substances, such as color, is crucial for correct identification and classification.
learn more about nitrogen dioxide here: brainly.com/question/30459594
#SPJ11
Sequencing an entire genome, such as that of C. elegant, a nematode, is most important because
Understanding the genetic basis of complex features and disorders requires the complete genome sequencing of an organism like C. elegans.
The sequencing of a genome sequence of the organism can help to find what organs and what part is performing which of the function of the body of the organism. For instance, scientists can locate genes linked to particular illnesses and create medications that specifically target these genes.
Additionally, they can research how specific genes and regulatory components function and create brand-new genetic engineering techniques to change them. Overall, sequencing a genome in its whole is a crucial step in better understanding biology.
To know more about genome sequencing, visit,
https://brainly.com/question/29598514
#SPJ4
What type of reaction is the synthesis of benzil from benzoin?
The synthesis of benzil from benzoin is an oxidation reaction. In this reaction, benzoin is oxidized to benzil using an oxidizing agent such as nitric acid or chromic acid.
The process involves the removal of two hydrogen atoms from the benzoin molecule, which results in the formation of a carbonyl group. This reaction is a type of organic synthesis that involves the transformation of one compound (benzoin) into another (benzil) through a chemical reaction.
A chemical process known as a redox or oxidation-reduction reaction occurs when the oxidation number of some of the atoms changes.
The oxidation number of the participating ions changes in a chemical reaction that involves both oxidation and reduction.
As a result, a reaction in which oxidation numbers change is what constitutes an oxidation-reduction reaction.
Learn more about oxidation-reduction reaction here
https://brainly.com/question/28082644
#SPJ11
[Post lab Q]: How many stereocenters are there in isoborneol? How many are there in camphor?
The number of stereocenters in isoborneol compound and camphor compound are two and three in counts.
Nuclear Magnetic Resonance (NMR) spectroscopy is a widely used technique in analytical chemistry to determine the purity of samples and to predict the structure of organic compounds. The H NMR spectroscopy provides the information about how many types of hydrogen atoms are present in the atom of a molecule. Stereocenters : An atom surrounded by four different groups is known as a chiral center or stereocenter.
Isoborneol is a chemical compound with formula, C₁₀H₁₈O, the number of Stereocenters in this compound are 2 in count. Similarly camphor is a chemical compound with formula, C₁₀H₁₆O, the number of Stereocenters in this compound are 3 in count.
For more information about stereocenters, visit :
https://brainly.com/question/31117175
#SPJ4
hey guys! can any of you smart ppl help me with this? thank you guys :)
Pb(NO3)2 (aq) + 2 KBr (aq) --> PbBr2 (s) + 2 KNO3 (aq)
1. If this reaction starts with 32.5g lead (II) nitrate and 38.75g potassium bromide, how many grams of the precipitate will be produced?
2. How many grams of the excess reactant will remain?
Answer: 15.33 grams of the excess reactant KBr will remain.
Explanation: The molar mass of Pb(NO3)2 is 331.21 g/mol:
32.5 g / 331.21 g/mol = 0.098 mol Pb(NO3)2
The molar mass of KBr is 119.00 g/mol:
38.75 g / 119.00 g/mol = 0.325 mol KBr
Agreeing to the adjusted condition, 1 mole of Pb(NO3)2 responds with 2 moles of KBr to create 1 mole of PbBr2:
1 mol Pb(NO3)2 : 2 mol KBr : 1 mol PbBr2
In this manner, the restricting reactant is Pb(NO3)2, because it will be totally devoured within the response.
The number of moles of PbBr2 delivered can be calculated utilizing the mole proportion from the adjusted condition:
0.098 mol Pb(NO3)2 x (1 mol PbBr2 / 1 mol Pb(NO3)2) = 0.098 mol PbBr2
The mass of PbBr2 delivered can be calculated utilizing its molar mass of 367.01 g/mol:
0.098 mol PbBr2 x 367.01 g/mol = 35.93 g PbBr2
Subsequently, 35.93 grams of the accelerate PbBr2 will be delivered.
To determine the mass of the abundance reactant, we are able utilize the sum of constraining reactant devoured within the response to find the sum of overabundance reactant remaining.
From the calculation above, we know that 0.098 mol of Pb(NO3)2 was expended within the response. Utilizing the mole proportion from the adjusted condition, we are able calculate the number of moles of KBr required to respond with this sum of Pb(NO3)2:
0.098 mol Pb(NO3)2 x (2 mol KBr / 1 mol Pb(NO3)2) = 0.196 mol KBr
Hence, 0.196 moles of KBr were required to respond with the 0.098 moles of Pb(NO3)2, clearing out an overabundance of KBr:
0.325 mol KBr - 0.196 mol KBr = 0.129 mol KBr remaining
The mass of the overabundance KBr can be calculated utilizing its molar mass of 119.00 g/mol:
0.129 mol KBr x 119.00 g/mol = 15.33 g KBr
What is the change in enthalpy when 9.00 mol of sulfur trioxide decomposes to sulfur dioxide and oxygen gas?2SO2(g) + O2(g) → 2SO3(g); ΔH° = 198 kJ/mol rxna. 891 kJb. -198 kJc. -891 kJd. 198 kJe. 1782 kJ
The given chemical equation shows the decomposition of 9.00 moles of sulfur trioxide to sulfur dioxide and oxygen gas. The enthalpy change for this reaction is given as ΔH° = 198 kJ/mol.
Enthalpy change refers to the amount of heat energy released or absorbed during a chemical reaction. A positive value of ΔH° indicates that the reaction is endothermic, meaning it absorbs heat energy from the surroundings, while a negative value indicates an exothermic reaction, meaning it releases heat energy to the surroundings.
In this case, the given value of ΔH° is positive, indicating that the reaction is endothermic. Therefore, for the given reaction, the change in enthalpy can be calculated as follows:
ΔH = (9.00 mol) x (198 kJ/mol) = 1782 kJ
This means that when 9.00 moles of sulfur trioxide decomposes to sulfur dioxide and oxygen gas, 1782 kJ of heat energy is absorbed from the surroundings. Hence, the correct option is (e) 1782 kJ.
TO KNOW MORE ABOUT chemical equation CLICK THIS LINK -
brainly.com/question/30087623
#SPJ11
an ideal gas can be heated in a closed system from t1 to t2 (> t1) either in a constant volume or constant pressure process. which one is true? multiple choice the entropy of the gas will increase more during a constant pressure process. the entropy of the gas will increase more during a constant volume process. the change in entropy of the gas will be the same for both processes. this is a stationary system; the entropy will remain constant regardless of the process. the answer depends on the ratio of pressures, p2/p1.
The entropy of the gas will increase more during a constant pressure process.
Entropy can be understood as the randomness associated with a system. The change in entropy is nothing but the difference between the absolute entropy values of the final state and the initial state in a process. An ideal gas is heated from temperature T1 to temperature T2 by keeping its volume constant. The gas is expanded back to its initial temperature according to the law PVn = constant. If the entropy changes in the two processes are equal, find the value of n in terms of the adiabatic index.
Learn more about entropy here:https://brainly.com/question/13135498
#SPJ11
The volume of a gas at 25 C is 3.8 L. What will be the volume of that gas at 57 C if the pressure is held constant?
phosphorus trihydride, ph3, gas is produced when phosphorus, p4, is reacted with hydrogen gas. if 23.89 grams of hydrogen, h2, is reacted with excess phosphorus gas, what is the pressure of the ph3 gas produced? the temperature after the reaction is 75.0 oc and the volume of the container is 3.15 l.
Phosphorus trihydride, PH₃, gas is produced when phosphorus, P₄, is reacted with hydrogen gas. if 23.89 grams of hydrogen, H₂, is reacted with excess phosphorus gas, the pressure of the PH₃ gas produced is 28.9 atm.
To calculate the pressure of PH₃ gas produced when 23.89 grams of H₂ reacts with excess P₄ gas, we need to first balance the chemical equation, then calculate the moles of PH₃ produced, and finally use the ideal gas law to find the pressure. The balanced chemical equation is:
P₄ + 6H₂ -> 4PH₃
From the balanced equation, we see that 6 moles of H₂ react with 1 mole of P₄ to produce 4 moles of PH₃. So, the number of moles of PH₃ produced can be calculated as follows:
moles of PH₃ = (23.89 g H2) / (2.016 g/mol H₂) x (1 mol PH₃ / 6 mol H₂) = 0.986 mol PH₃
Using the ideal gas law, we can find the pressure of the PH₃ gas produced:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.
First, we convert the temperature from Celsius to Kelvin:
T = 75.0 + 273.15 = 348.15 K
Plugging in the values, we get:
P = nRT / V = (0.986 mol) x (0.0821 L·atm/mol·K) x (348.15 K) / (3.15 L) = 28.9 atm
Therefore, the pressure of the PH₃ gas produced is 28.9 atm.
To know more about the Phosphorus trihydride refer here :
https://brainly.com/question/13785267#
#SPJ11
Recrystallization techniques are used to purify meso-hydrobenzoin. What (give specific names) are you separating meso-hydrobenzoin from?
Recrystallization techniques are used to purify meso-hydrobenzoin by separating it from impurities such as unreacted starting materials and side products. In the case of meso-hydrobenzoin, you may be separating it from impurities like benzil and benzoin. The recrystallization process selectively dissolves the desired compound in a suitable solvent, leaving behind impurities. Upon cooling, the pure compound crystallizes, allowing for its separation from the impure mixture.
Recrystallization techniques are used to separate meso-hydrobenzoin from impurities that may be present in the sample, such as other isomers of hydrobenzoin, solvent molecules, or other contaminants.
The process involves dissolving the crude meso-hydrobenzoin in a suitable solvent, and then allowing it to cool slowly so that the crystals of the desired compound can form and separate from the impurities. Some common solvents used in recrystallization of meso-hydrobenzoin include ethanol, methanol, and water.
To know more about Recrystallization click here:
https://brainly.com/question/15703840
#SPJ11
at the end of a reaction it is important to remove the solvent from a solid product (more than one answer may be correct)
Distillation is a process where the solvent can be removed from a liquid solution.Evaporation is a process where the solvent can be removed by exposing the liquid solution .
What is solution ?A solution is a means of resolving a problem, dispute, or difficult situation. It is a way of coming to an agreement on a particular issue. Solutions can take many forms, including a compromise, mediation, arbitration, or a resolution. Solutions often involve a combination of approaches and involve all interested parties in the process. Solutions can be developed through dialogue, negotiation, and collaboration, as well as through research, analysis, and experimentation. Solutions need to be practical, achievable, and realistic in order to be successful.
Filtration is a process where the solid product can be separated from the liquid solution. Crystallization is a process where the solvent can be removo learn more about moleculesed from the solution.
To learn more about solution
https://brainly.com/question/25326161
#SPJ4
______ is a thermodynamic function that describes the number of arrangements (positions and/or energy levels) that are available to a system.
"Entropy" is a thermodynamic function that describes the number of arrangements (positions and/or energy levels) that are available to a system.
Entropy is a measure of the disorder or randomness of a system, and it is related to the number of microstates that are accessible to a system at a given temperature and pressure. The greater the number of microstates, the higher the entropy. In thermodynamics, entropy is a fundamental concept that plays a key role in understanding the behavior of energy and matter in physical and chemical systems. It is important in many areas of science and engineering, including physics, chemistry, biology, and materials science.
Learn more about Entropy here;
https://brainly.com/question/31066828
#SPJ11
Which is pipe strength expressed in?
a.) Hydrostatic potential
b.) Psi and durability
c.) Tensile and flexural strength
d.) Baud units
Answer:
Tensile and flexural strength
Explanation:
[tex]hope \: it \: helps[/tex]
What are the two different ions present in the compound Al(NO3)3?A) Al3+, (NO3)3- D) Al3+, NO33-B) Al+, NO3- E) Al+, (NO3)3-C) Al3+, NO3
The two different ions present in the compound Al(NO₃)₃ are Al³⁺ and NO₃⁻.
Generally, an ion is defined as an atom or group of atoms that has an electric charge. Basically, ions with a positive charge are called cations and ions with a negative charge are known as anions. Also, many normal substances exist in the body as ions.
Aluminium nitrate [Al(NO₃)₃] is a compound which is made up of two ions named as aluminium ion which is the cation and nitrate ion which is the anion. Basically, Aluminium nitrate is water soluble salt which is crystalline hydrate in nature.
The balanced chemical reaction is given as,
3 Al³⁺ + 3 NO₃⁻ → 3 Al(NO₃)₃
Learn more about ions from the link given below.
https://brainly.com/question/14982375
#SPJ4
Role of each addition of water (2)
When water is added to a substance, its role can vary depending on the context. In general, adding water can help dissolve or dilute a substance, making it easier to work with or consume. In cooking, adding water can help to hydrate ingredients and create a desired texture, such as in the case of dough or batter. It can also be used to create a sauce or broth by combining flavors and creating a liquid base.
When water is added to the body, its role is even more critical. Drinking enough water is essential for hydration and maintaining proper bodily function. It can also help flush toxins from the body and regulate body temperature. Additionally, water plays a role in digestion, as it helps break down food and transport nutrients throughout the body.
However, adding too much water can have negative consequences. Overhydration can lead to water intoxication, which can cause headaches, nausea, and even death. In the case of cooking, adding too much water can result in a bland or diluted taste.
Overall, the role of adding water depends on the situation and purpose, but it can play a crucial role in cooking and maintaining bodily health.
To learn more about, substance
https://brainly.com/question/29108029
#SPJ11
What common colligative property will you be exploring?
a common colligative property that is explored in many experiments and real-life applications is the freezing point depression.
Freezing point depression is a colligative property that depends on the number of solute particles in a solution, but not on their identity or chemical properties. When a solute is added to a solvent, it lowers the freezing point of the solution compared to the pure solvent. This is because the presence of solute particles disrupts the crystal lattice structure of the solvent, making it more difficult for the solvent molecules to arrange themselves in an ordered manner and form ice crystals. As a result, a solution will freeze at a lower temperature than the pure solvent.
Freezing point depression is a useful colligative property in many applications, such as in antifreeze solutions used in automobiles and in the preservation of food and biological samples by freezing. It is also commonly explored in chemistry experiments, where it can be used to determine the molecular weight of an unknown solute by measuring the freezing point depression of a known solvent-solute solution.
Visit to know more about Colligative property:-
brainly.com/question/1831338
#SPJ11
HOW WOULD YOU SOLVE FOR THIS PLEASE??!!
Pb(NO3)2 (aq) + 2 KBr (aq) --> PbBr2 (s) + 2 KNO3 (aq)
part 1: If this reaction starts with 32.5g lead (II) nitrate and 38.75g potassium bromide, how many grams of the precipitate will be produced? (use the limiting reactant to calculate the amount of precipitate formed)
35.93 grams of PbBr2 will be produced.
we can calculate the number of moles of each reactant:
Moles of Pb(NO3)2 = 32.5 g / 331.21 g/mol = 0.098 mol
Moles of KBr = 38.75 g / 119.01 g/mol = 0.325 mol
To determine the limiting reactant, we need to compare the mole ratios of the reactants in the balanced equation. From the equation, we can see that 1 mole of Pb(NO3)2 reacts with 2 moles of KBr. Therefore, if we have 0.098 moles of Pb(NO3)2, we would need 2 x 0.098 = 0.196 moles of KBr to react completely.
However, we only have 0.325 moles of KBr, which is more than enough to react with all of the Pb(NO3)2. Therefore, KBr is not the limiting reactant; Pb(NO3)2 is the limiting reactant.
Using the mole ratio from the balanced equation, we can find the moles of PbBr2 that will be formed:
Moles of PbBr2 = 0.098 mol Pb(NO3)2 x (1 mol PbBr2 / 1 mol Pb(NO3)2) = 0.098 mol PbBr2
Finally, we can use the molar mass of PbBr2 to find the mass of the product formed:
Mass of PbBr2 = 0.098 mol PbBr2 x 367.01 g/mol = 35.93 g
Therefore, 35.93 grams of PbBr2 will be produced.
learn more about limiting reactant here
https://brainly.com/question/26905271
#SPJ1
What kind of alkyl halide will definitely undergo an SN1 reaction (if substitution reaction is the only possibility) even in the presence of a good nucleophile? Think about an alkyl halide that will definitely undergo SN1 but not SN2.
An alkyl halide that will definitely undergo an SN1 reaction, even in the presence of a good nucleophile, is a tertiary alkyl halide.
Tertiary alkyl halides have a carbon atom bonded to three other carbon atoms and a halogen atom. In an SN1 reaction, the rate-determining step involves the formation of a carbocation intermediate. Tertiary carbocations are more stable than primary or secondary carbocations due to the inductive effect and hyperconjugation, which distribute the positive charge across multiple carbon atoms. This stability facilitates the SN1 reaction pathway.
In contrast, tertiary alkyl halides are less likely to undergo SN2 reactions because of the steric hindrance around the central carbon atom. Good nucleophiles have difficulty approaching the carbon atom due to the bulky groups surrounding it. Thus, even when a good nucleophile is present, a tertiary alkyl halide will preferentially undergo an SN1 reaction rather than an SN2 reaction. An alkyl halide that will definitely undergo an SN1 reaction, even in the presence of a good nucleophile, is a tertiary alkyl halide.
learn more about an SN1 reaction here:
https://brainly.com/question/31324595?
#SPJ11
If I have 3. 9 L of gas at a pressure of 5. 0 atm and a temperature of 50. 0 °C, what will be the temperature of the gas if I decrease the volume of the gas to 2. 4 L and decrease the pressure to 4. 0 atm?
The temperature of the gas when the volume is decreased to 2.4 L and the pressure is decreased to 4.0 atm is approximately 324.9 K (or 51.75 °C).
To solve this problem, we can use the combined gas law, which relates the pressure, volume, and temperature of a gas:
(P1 × V1) / T1 = (P2 × V2) / T2
where P1, V1, and T1 are the initial pressure, volume, and temperature of the gas, and P2, V2, and T2 are the final pressure, volume, and temperature of the gas.
(5.0 atm × 3.9 L) / (50.0 + 273.15 K) = (4.0 atm × 2.4 L) / T2
Simplifying and solving for T2, we get:
T2 = (4.0 atm × 2.4 L × (50.0 + 273.15 K)) / (5.0 atm × 3.9 L)
T2 ≈ 324.9 K
Therefore, the temperature of the gas when the volume is decreased to 2.4 L and the pressure is decreased to 4.0 atm is approximately 324.9 K (or 51.75 °C).
Learn more about temperature Visit: brainly.com/question/27944554
#SPJ4
in the following reaction, how many molecules of bh3 are required to react with 6 molecules of 2-methyl-2-butene? ch9 d2 q5.pdf
The number of molecules of BH₃ is 2 to react with 6 molecules of 2-methyl-2-butene.
The smallest recognisable unit into which a pure material may be split while retaining its composition and chemical characteristics is a molecule, which is a collection of two or more atoms.
Until portions consisting of single molecules are reached, the division of a sample of a substance into progressively smaller parts does not result in a change in either its composition or its chemical characteristics. Still smaller parts of the substance are produced by further subdivision, and these parts are always different chemically and typically have different compositions from the original substance. The chemical links that hold the atoms in the molecule together are severed at this final step of fragmentation.
Atoms are made up of a single positively charged nucleus that is surrounded by a cloud of negatively charged electrons. Atoms interact with one another and with their nuclei when they are near to one another. The atoms join together to form molecules if this contact lowers the system's overall energy level.
Learn more about Number of molecules:
https://brainly.com/question/30337264
#SPJ4