The value of the Ecell at 298K for the cell based reaction Cu(s) + 2Ag⁺(aq) → Cu⁺²(aq) + 2Ag(s) is 0.495 V.
To calculate the Ecell value at 298K for the given cell, we need to use the Nernst equation,
Ecell = E°cell - (RT/nF) ln(Q), Ecell is the cell potential Ecell, he standard cell potential E°cell, gas constant (8.314 J/mol·K) is R, temperature in Kelvin (298 K) is T, number of electrons transferred in the reaction (2 in this case) is n, Faraday constant (96,485 C/mol) is F and reaction quotient is Q.
First, let's find the value of Q. The reaction quotient for this cell is,
Q = [Cu²⁺][Ag]² / [Ag⁺]²
Substituting the given concentrations,
Q = (0.000900)(0.00475)² / (0.00475)²
Q = 0.000900
Next, let's find the standard cell potential, E°cell. We can look this up in a table of standard reduction potentials. The half-reactions for this cell are,
Cu²⁺(aq) + 2e⁻ → Cu(s) E°red = +0.34 V
Ag⁺(aq) + e⁻ → Ag(s) E°red = +0.80 V
To get the overall reaction, we need to reverse the first half-reaction and multiply it by 2,
Cu(s) → Cu²⁺(aq) + 2e⁻ E°red = -0.34 V
2Ag⁺(aq) + 2e⁻ → 2Ag(s) E°red = +0.80 V
Adding these two half-reactions gives the overall reaction,
Cu(s) + 2Ag⁺(aq) → Cu²⁺(aq) + 2Ag(s) E°cell = +0.46 V
Now we can use the Nernst equation to calculate the cell potential at 298K,
Ecell = E°cell - (RT/nF) ln(Q)
Ecell = 0.46 - (8.314 × 298 / (2 × 96,485)) ln(0.000900)
Ecell = 0.46 - (0.0257) ln(0.000900)
Ecell = 0.46 - (-0.0349)
Ecell = 0.495 V
Therefore, the Ecell value at 298K for the given cell is 0.495 V.
To know more about Nerst equation, visit,
https://brainly.com/question/15237843
#SPJ4
Complete question - Calculate the Ecell value at 298K for the cell based on the reaction:
Cu(s) + 2Ag⁺(aq) → Cu⁺²(aq) + 2Ag(s)
where [Ag⁺]= 0. 00475 M and [Cu⁺²]=0. 000900 M
What increases the frequency of fog in urban areas?
There are several factors that contribute to the increased frequency of fog in urban areas. One of the main reasons is the high concentration of air pollution in cities, which can lead to the formation of fog.
Additionally, the urban heat island effect, where cities are generally warmer than surrounding rural areas, can create temperature inversions that trap moisture and increase the likelihood of fog formation. air pollution, which is more common in urban areas and high concentration, provides particles that act as nuclei for fog droplet formation, thereby increasing the frequency of fog events. Lastly, the presence of tall buildings and other structures in urban areas can disrupt the natural flow of air, causing moisture to accumulate and form fog.
learn more about high concentration Refer: https://brainly.com/question/30259556
#SPJ11
Why is the reaction but in ice before NaBH4?
When conducting a reaction involving sodium borohydride (NaBH4), the reaction mixture is often placed in an ice bath before adding NaBH4.
When conducting a reaction involving sodium borohydride (NaBH4), the reaction mixture is often placed in an ice bath before adding NaBH4 so that to control the reaction temperature and ensure a slow, controlled release of hydrogen gas. Sodium borohydride is a powerful reducing agent and can react vigorously with water or other protic solvents, generating heat and hydrogen gas. By cooling the reaction mixture in an ice bath, the reaction rate is decreased, making it safer and easier to control. The reaction is often carried out in an ice bath before adding Sodium Borohydride (NaBH4) because NaBH4 is highly reactive and can decompose rapidly in the presence of water. By placing the reaction mixture in an ice bath, the temperature is lowered which slows down the reaction and reduces the risk of premature decomposition of NaBH4. Additionally, the ice bath helps to maintain the stability of the reaction mixture by preventing excessive heating that could result from the exothermic nature of the reaction. Therefore, the use of an ice bath helps to ensure that the reaction proceeds smoothly and that the desired product is obtained.
To know more about sodium borohydride
Please click:-
https://brainly.com/question/31321350
#SPJ11
What does these signs of ∆G tell us?∆G < 0∆G > 0∆G = 0
The signs of ∆G tell us about the direction and magnitude of the change in Gibbs free energy of a chemical reaction.
When ∆G is less than 0, it indicates that the reaction is exergonic, meaning that it releases energy and is thermodynamically favorable. When ∆G is greater than 0, it indicates that the reaction is endergonic, meaning that it requires energy input and is thermodynamically unfavorable. When ∆G is equal to 0, it indicates that the reaction is at equilibrium, with no net change in the concentrations of reactants and products. Therefore, these signs of ∆G provide crucial information about the energy changes and thermodynamic feasibility of a chemical reaction.
Hi! These signs of ∆G tell us about the spontaneity of a chemical reaction. When ∆G < 0, the reaction is spontaneous and occurs without external energy input. When ∆G > 0, the reaction is non-spontaneous and requires external energy to occur. When ∆G = 0, the reaction is at equilibrium, and there is no net change in the concentrations of reactants and product.
Learn more about chemical reaction here;
https://brainly.com/question/29039149
#SPJ11
How is potassium benzilate converted to benzilic acid?
Potassium benzilate can be converted to benzilic acid through a process called benzilic acid rearrangement.
This involves the acid-catalyzed rearrangement of the potassium benzilate molecule, which results in the formation of benzilic acid. The process involves the cleavage of the carbon-oxygen bond in the potassium benzilate molecule, followed by the migration of a carbonyl group to an adjacent carbon atom. This rearrangement results in the formation of the benzilic acid molecule. The use of a strong acid catalyst, such as sulfuric acid or hydrochloric acid, is typically required to facilitate the reaction.
learn more about carbonyl group Refer: https://brainly.com/question/28213406
#SPJ11
Question 34
Hydrogen sulfide can be fatal at an exposure of
a. 100 ppm
b. 150 ppm
c. 225 ppm
d. 300 ppm
100 ppm of hydrogen sulfide exposure can be fatal. As a result, option a is correct.
There are several death causing symptoms are seen in people who were exposed in front of Hydrogen sulfide (H₂S). OSHA, a safety organization made a statement that said that about 10 ppm of hydrogen sulfide during an 8-hour workday were not a matter of concern. However, concentrations of 100 ppm or more have the potential to be instantly hazardous to life and health (IDLH), which means they have the potential to result in immediate death or major health damage.
To know more about Hydrogen sulfide, visit,
https://brainly.com/question/29416755
#SPJ4
how might you carry out the following selective transformations? (note that a protection step may be required, and recall that aldehydes are more reactive than ketones toward nucleophilic addition.) syntheses may require several steps.
To carry out selective transformations, one could use various methods such as chemical reactions, catalysts, and/or specific reagents. For example, to selectively convert an aldehyde to a ketone, one could use a protecting group such as an acetal or ketal to protect the aldehyde group. Then, the ketone could be formed using an oxidizing agent such as Jones reagent or Swern oxidation.
To selectively convert a ketone to an aldehyde, one could use a reducing agent such as sodium borohydride or lithium aluminum hydride to reduce the ketone to an alcohol. Then, the alcohol could be oxidized using an oxidizing agent such as PCC or Dess-Martin periodinane to selectively convert it to an aldehyde.
In cases where an aldehyde is more reactive than a ketone, selective transformations can be carried out using nucleophiles. For example, to selectively add a nucleophile to an aldehyde, one could use a mild nucleophile such as cyanide ion or sodium bisulfite to form a cyanohydrin or a sulfite adduct, respectively. To selectively add a nucleophile to a ketone, one could use a more reactive nucleophile such as Grignard reagents or organolithium compounds.
Overall, the selective transformations required for a synthesis may require several steps, and a protection step may be required to protect the functional group that is not being transformed.
To learn more about chemical reactions visit;
https://brainly.com/question/29039149
#SPJ11
Question 23
The final product in biochemical oxidation of ammonia yield:
a. nitride
b. nitrite
c. nitrate
d. nitrogen
The final product in biochemical oxidation of ammonia is c. nitrate.
The final product in biochemical oxidation of ammonia is nitrate. This is because ammonia (NH3) is oxidized by bacteria to form nitrite (NO2-) which is then further oxidized to nitrate (NO3-). Nitride (N3-) is not a product of this reaction, nor is nitrogen (N2).The theoretical yield of ammonia from a given amount of nitrogen and hydrogen is determined by the stoichiometric equation for the Haber process, which states that 4 moles of hydrogen react with 1 mole of nitrogen to form 2 moles of ammonia.
learn more about nitrate Refer: https://brainly.com/question/29388871
#SPJ11
Fill in the last column,
PLEASE NO NONSENSE TYPING TO GET POINTS.
The data provided is incomplete as neither the concentration of NaOH nor the volume of HCl used is given,
However, to determine the concentration of HCl, the formula below is used:
Ca = CbVb/Va
How can the concentration of HCl be determined in the titration experiment?The concentration of HCl determined in the titration experiment can be determined using the equation of the reaction and the formula below:
Equation of reaction: HCl + NaOH ---> NaCl + H₂O
Formula: Ca = CbVb/Va
Where;
Ca is the concentration of HCl
Cb is the concentration of NaOH
Vb is the volume of NaOH used
Va is the volume of HCl used.
Learn more about titration at: https://brainly.com/question/27107265
#SPJ1
If you had 5.0 g of material that needed to be purified, would you opt for using TLC or column chromatography to purify your material? Explain your answer.
If you have 5.0 g of material that needs to be purified, I would recommend using column chromatography to purify your material.
Column chromatography is more suitable for larger quantities and can separate complex mixtures more efficiently than TLC (thin-layer chromatography), which is typically used for smaller-scale analysis and preliminary identification of components.
It is a precursory method for purifying substances based on how hydrophobic or polar they are. The molecular mixture in this chromatography procedure is divided based on how differently it partitions between a stationary phase and a mobile phase.
The compound mixture is transported by a mobile phase through a stationary phase in a separation that is comparable to that of TLC.
Elution is a chromatographic process that involves utilising a solvent to remove an adsorbate from a solid adsorbing substrate.
To know more about column chromatography click here:
https://brainly.com/question/30296545
#SPJ11
I would need some help on this I would really appreciate if you could help out with that one.
The types of intermolecular forces (IMFs) present in Carbon dioxide are London dispersion forces and dipole-dipole forces. At standard temperature and pressure (STP), which is defined as 0°C and 1 atm, carbon dioxide will sublime.
What are different types of intermolecular forces?There are several types of intermolecular forces, including London dispersion forces, dipole-dipole interactions, and hydrogen bonding.
(1) Carbon dioxide :
Type of IMFs : London dispersion forces.
Sublime at STP : Yes
(2) Hydrogen fluoride :
Type of IMFs : Dipole- Dipole
Sublime at STP : No
(3) Calcium chloride :
Type of IMFs : Ionic
Sublime at STP : No
(4) Naphthalene :
Type of IMFs : London dispersion forces
Sublime at STP : Yes
(5) Iodine :
Type of IMFs : Dipole induced dipole
Sublime at STP : Yes
(6) Sodium chloride :
Type of IMFs : Ionic
Sublime at STP : No
(6) Water :
Type of IMFs : Hydrogen Bonding
Sublime at STP : No
Learn more about forces here:
https://brainly.com/question/9007693
#SPJ1
Write a balanced chemical equation describing the oxidation of chlorine gas by the copper(III) ion to form the chlorate ion and copper(II) in an acidic aqueous solution. Use the smallest whole-number coefficients possible.
The balanced chemical equation for the oxidation of chlorine gas (Cl₂) by the copper(III) ion (Cu³⁺) to form the chlorate ion (ClO₃⁻) and copper(II) ion (Cu²⁺) in an acidic aqueous solution is:
2 Cl₂ + 2 Cu³⁺ + 6 H₂O → 2 ClO₃⁻ + 2 Cu²⁺ + 12 H⁺
The balanced chemical equation is obtained by ensuring that the number of atoms of each element is the same on both sides of the equation. In this case, chlorine gas (Cl₂) is oxidized by the copper(III) ion (Cu³⁺) in an acidic aqueous solution, resulting in the formation of the chlorate ion (ClO₃⁻) and copper(II) ion (Cu²⁺).
To balance the equation, we need to make sure that the number of chlorine atoms, copper atoms, and hydrogen atoms is the same on both sides of the equation.
In this case, the coefficients of the reactants and products are multiplied to achieve a balanced equation. The smallest whole-number coefficients possible are used to obtain the simplest and most balanced equation.
To know more about oxidation refer here:
https://brainly.com/question/25798412#
#SPJ11
4. How many liters of 3.5 M HC₂H3O2 are needed to neutralize 50 mL of a 2.5 M
Ba(OH)2 solution?
Answer: ≡60⋅mL
Explanation:
Based on the information in the text, what is likely true about nitrogen, neon, and helium?
A. Their pure liquid states do not occur naturally on Earth.
B. They are essential elements for human life on earth.
C.They are all in the same group of gases on the periodic table.
D. They can be used interchangeably in most applications.
B. They are essential elements for human life on earth is likely true about nitrogen, neon, and helium
What is accurate regarding helium and neon?In this instance, neon's valence shell is fully populated with 8 electrons. As a result, helium and neon atoms share the fact that they both belong to the same group and have fully filled valence shells.
The most prevalent element in the universe, hydrogen, which makes up around 75% of all ordinary stuff, was produced during the Big Bang. A two protons and two neutrons, surrounded by two electrons, nucleus makes up the element helium, which is often found as a gas.
learn more about electrons
https://brainly.com/question/26084288
#SPJ1
a non-expandable container, with a volume of 1500 ml, is filled with a mixture of gases at 30 oc. the partial pressure of the helium gas, he(g), in the container is 510 torr. the partial pressure of the medical gas, x2(g), in the container is 291 torr. the partial pressure of elizium gas, o2(g), in the container is 0.539 atm. what is the total pressure the gases exert on the container?
The total pressure exerted by the gases on the container is 1.593 atm when a non-expandable container, with a volume of 1500 ml, is filled with a mixture of gases at 30°C.
To find the total pressure exerted by the gases in the container, you need to add up the partial pressures of each gas. The given partial pressures are in different units, so you need to convert them to a common unit before adding them. Let's use atmospheres (atm) as the common unit.
1. Convert the partial pressure of helium gas (He) from torr to atm:
1 atm = 760 torr
510 torr × (1 atm / 760 torr) = 0.671 atm
2. Convert the partial pressure of medical gas ([tex]X_2[/tex]) from torr to atm:
291 torr × (1 atm / 760 torr) = 0.383 atm
3. The partial pressure of elizium gas ([tex]O_2[/tex]) is already given in atm: 0.539 atm
4. Add the partial pressures of all three gases to find the total pressure:
Total pressure = P(He) + P([tex]X_2[/tex]) + P([tex]O_2[/tex])
Total pressure = 0.671 atm + 0.383 atm + 0.539 atm
Total pressure = 1.593 atm
To learn more about pressure click here https://brainly.com/question/18431008
#SPJ11
this reaction can be replicated in teh lab by preforming a titration. if 7.21 g of caco3 solid is added to 1.2l of 0.211 mol l-1 sulfuric acid, how many moles of acid will remain after reaction
After the reaction between 7.21 g of CaCO₃ solid and 1.2 L of 0.211 mol/L sulfuric acid, 0.1812 mol of acid will remain. This reaction can be replicated in the lab by performing a titration.
To answer this question, we need to use the balanced chemical equation for the reaction between calcium carbonate (CaCO₃) and sulfuric acid (H₂SO₄):
CaCO₃ + H₂SO₄ → CaSO₄ + CO₂ + H₂O
From this equation, we can see that 1 mole of CaCO₃ reacts with 1 mole of H2SO4. Therefore, to find out how many moles of acid remain after the reaction, we need to first calculate how many moles of acid reacted with the 7.21 g of CaCO₃.
To do this, we need to convert the mass of CaCO₃ to moles. The molar mass of CaCO₃ is 100.09 g/mol, so:
7.21 g CaCO₃ x (1 mol CaCO₃ / 100.09 g CaCO₃) = 0.072 mol CaCO₃
Since 1 mole of CaCO3 reacts with 1 mole of H₂SO₄ we know that 0.072 mol of H₂SO₄ reacted in the reaction. To find out how many moles of acid remain, we need to subtract this from the initial amount of acid:
moles of H₂SO₄ = (concentration of H₂SO₄) x (volume of H₂SO₄)
moles of H₂SO₄ = (0.211 mol/L) x (1.2 L) = 0.2532 mol H₂SO₄
moles of H₂SO₄ remaining = 0.2532 mol H₂SO₄ - 0.072 mol H₂SO₄ = 0.1812 mol H₂SO₄
Learn more about chemical equation here
https://brainly.com/question/28294176
#SPJ11
Assuming similar conditions, how many liters of water vapor, H2O, react to produce 1L of hydrogen gas?C(s) + H2O(g) ® CO(g) + H2(g)
To produce 1L of hydrogen gas, you will need 1L of water vapor to react with the carbon solid.
To determine the number of liters of water vapor needed to produce 1L of hydrogen gas, we need to consider the balanced chemical equation:
C(s) + H₂O(g) → CO(g) + H₂(g)
From the equation, it is clear that one mole of water vapor reacts with one mole of carbon to produce one mole of carbon monoxide and one mole of hydrogen gas. Since the ratio of moles is 1:1, the ratio of volumes (in liters) is also 1:1, assuming similar conditions.
Therefore, water vapor reacts with the carbon solid is 1L
Learn more about volumes at https://brainly.com/question/30578289
#SPJ11
Discuss how you think oxygen levels in an estuary might be likely to rise or fall during a cold spell
Answer: In spring and summer, the uppermost layer of an estuary grows warmer and mixing between this surface water and the cooler bottom water slows. As air temperatures cool through the autumn, the surface water becomes increasingly cold and increases in density.
Explanation:
hope it helps
What was the initial pressure of a balloon that had an initial temperature of 124K but was pressurized to 200.6 kPa, reducing the temperature to 74K?,
an ___ filter is a device that removes oil droplets from a pneumatic system by forcing compressed air to change direction quickly.
Answer:
your answe would be a oil removal
Carbon forms four single covalent bonds with other atoms.
(Never True, Always True, Sometimes True)
Always True. Carbon forms four single covalent bonds with other atoms due to its four valence electrons, allowing it to create stable compounds by sharing electrons with other atoms.
Carbon is located in group 14 of the periodic table and has 4 valence electrons. These electrons are available for bonding with other atoms, and carbon typically forms 4 single covalent bonds with other atoms, resulting in a stable octet configuration. However, there are some exceptions where carbon can form fewer or more than 4 covalent bonds. For example, in the case of carbon monoxide (CO), carbon forms a triple bond with oxygen, resulting in a total of only 2 covalent bonds. In other cases, such as with certain organic molecules, carbon can form double or triple bonds with other carbon atoms or other elements. Nonetheless, in the vast majority of cases, carbon forms 4 single covalent bonds with other atoms.
To know more about Carbon atoms, please click on:
https://brainly.com/question/15451582
#SPJ11
of two different liquids are poured through a funnel with a narrow exit tube, and the time for all of the liquid to flow through is recorded. here are some results: trial time to flow through funnel liquid x liquid y 1 2 3 note: the two liquids have the same density. what's different about liquids x and y? your answer should be the one- or two-word name of a physical property.
After analyzing the given values for two different liquid, the physical quantity where both liquids differ is viscosity.
The viscosity of a liquid is a proportion of its protection from distortion at a given rate. For fluids, it compares to the casual idea of "viscosity": for instance, syrup has a higher consistency than water.
Viscosity evaluates the inside frictional power between adjoining layers of liquid that are in relative movement. For example, when a thick liquid is constrained through a cylinder, it streams more rapidly close to the cylinder's pivot than close to its walls. Tests show that some pressure (like a strain contrast between the two finishes of the cylinder) is expected to support the stream. This is on the grounds that a power is expected to conquer the rubbing between the layers of the liquid which are in relative movement. For a cylinder with a steady pace of stream, the strength of the remunerating force is corresponding to the liquid's consistency.
To know more about viscosity, visit here:
brainly.com/question/30577668
#SPJ4
Full Question ;
ml. or two different liquids are poured through a funnel with a narrow exit tube, and the time for all of the liquid to flow through is recorded. Here are some results: time to flow through funnel trial Liquid X Liquid Y 1 2 1.90 1.81 1.94 9.36 9.69 10.15 3 Note: the two liquids have the same density What's different about liquids X and Y? Your answer should be the one or two-word name of a physical property ?
Why are polar protic solvents preferable for the Sn1 reactions?
Polar protic solvents are preferable for Sn1 reactions because they are capable of stabilizing the intermediate carbocation and the leaving group through hydrogen bonding and solvation, thus promoting the reaction's rate and efficiency.
Polar protic solvents are preferable for Sn1 reactions because they have the ability to stabilize the carbocation intermediate that is formed during the reaction. The polar protic solvent can do this by solvating the carbocation through hydrogen bonding. This stabilization helps to lower the activation energy required for the reaction to occur, making it more favorable.
Additionally, the polar nature of the solvent helps to increase the rate of the reaction by facilitating the dissociation of the leaving group. Overall, the use of a polar protic solvent in Sn1 reactions can lead to increased yields and faster reaction rates.
learn more about Polar protic solvents here: brainly.com/question/13144944
#SPJ11
a 40 y/o pt has the following lab values. how should they be interpreted?
HBsAg (-), HBsAB(+), HBcAb(-)
a. the pt had hepatitis
b. the pt has hepatitis
c. the pt should consider immunization
d. the pt has been immunized
Based on the lab values provided, the answer would be D. The patient has been immunized against hepatitis B as indicated by the presence of HBsAB.
The absence of HBsAg and HBcAb suggest that the patient has not had a recent or current infection with hepatitis B. It is important to note that these lab values should be interpreted by a health care provider in the context of the patient's medical history and any additional lab or clinical findings.
HBcAb (-) means the patient does not have antibodies for the hepatitis B core antigen, suggesting no past infection. These results suggest that the patient has been immunized against hepatitis B.
To know more about health click here
brainly.com/question/24054028
#SPJ11
Interpreting these lab values for a 40-year-old patient with the given terms:
HBsAg (-), HBsAB(+), HBcAb(-)
a. the pt had hepatitis
b. the pt has hepatitis
c. the pt should consider immunization
d. the pt has been immunized
Your answer: d. the pt has been immunized.
HBsAg (Hepatitis B surface antigen) is negative, which indicates the patient does not have an active Hepatitis B infection.
HBsAB (Hepatitis B surface antibody) is positive, which suggests that the patient has developed immunity to Hepatitis B, either from previous exposure or immunization.
HBcAb (Hepatitis B core antibody) is negative, which means the patient has never been exposed to Hepatitis B.
Therefore, the interpretation of these lab values suggests that the patient has been immunized against Hepatitis B.
To know more about HBsAg , HBsAB and HBcAb:
https://brainly.com/question/31546490
#SPJ11
How many Br atoms are in 2.50 g of Br?A) 1.88x1022 Br atoms D) 6.02 x 1023 Br atomsB) 1.51 x 1024 Br atoms E) 9.42 x 1021 Br atomsC) 7.54 x 1021 Br atoms
The number of Br atoms in 2.50 g of B r is 1.88 × 10²² Br atoms. Hence, option A is correct.
Generally, molecular mass of an element is defined as the sum of the masses of the elements which are present in the molecule. Molecular mass is basically obtained by multiplying the atomic mass of an element with the number of atoms in the molecule and then adding the masses of all the elements in the molecule.
Given mass of Br = 2.50 g
Molar Mass of Br = 79.904 g\mol
Number of moles of Br = 2.50 g/ 79.904 g/mol = 0.0313 mole
Each mole of Br atoms contain 6.023 × 10²³ atoms.
0.0313 mole of Br will contain = 0.0313 mole of Br × (6.023 × 10²³ atoms / 1 mole of Br) = 1.88 × 10²² Br atoms.
Hence, option A is correct.
Learn more about molecular masses from the link given below.
https://brainly.com/question/14122402
#SPJ4
Oxygen deficient atmospheres have less than what concentration of oxygen?
a) 15.5 %
b) 19.5%
c) 23.5%
d) 26.5%
I NEED HELP WITH THIS SCIENCE QUESTION!!!! +21 points
Answer:
Row 2 "As the earth revolves around the sun, its nighttime view of space keeps changing."
Explanation:
How many neutrons are in the nucleus of an atom of 118/50 Sn?
There are 68 neutrons in the nucleus of an atom of 118/50 Sn (tin).
To determine the number of neutrons in the nucleus of an atom of 118/50 Sn, we need to understand the atomic structure and notation. The symbol "Sn" represents the element tin, and the numbers 118 and 50 are mass number (A) and atomic number (Z), respectively.
The mass number (A) is the sum of protons and neutrons in the nucleus, while the atomic number (Z) indicates the number of protons in the nucleus. In this case, the atomic number is 50, which means there are 50 protons in the tin atom.
To find the number of neutrons (N) in the nucleus, we use the following formula:
N = A - Z
Substitute the values:
N = 118 - 50
N = 68
You can learn more about neutrons at: brainly.com/question/28992636
#SPJ11
Ch19: Which one of the following reactions have a positive value for ΔS?1. C10H8 (g) --> C10H8(s)2. F3BNH3(g) --> BF3(g) + NH3(g)3. N2(g) + 3H2 (g) --> 2NH3(g)4. CS2 (g) + 4H2 (g) --> CH4 (g) + 2H2S (g)
The sign of ΔS plays an important role in determining the spontaneity of a chemical reaction. If ΔS is positive, the reaction is more likely to occur spontaneously, while if ΔS is negative, the reaction may require external energy input to occur.
In thermodynamics, ΔS represents the change in entropy of a system during a chemical reaction. Entropy is a measure of the degree of disorder or randomness in a system. When a chemical reaction occurs, the entropy of the products and the reactants may change. The sign of ΔS determines whether a reaction is exothermic or endothermic.
Among the reactions listed, the one that has a positive value for ΔS is
[tex]N_2(g) + 3H_2(g) --> 2NH_3(g).[/tex]
This reaction involves the synthesis of ammonia, which is an endothermic process. The reactants have lower entropy than the products, meaning that the system becomes more disordered during the reaction. The entropy of the products is greater than the entropy of the reactants, so the ΔS is positive.
In contrast, the reactions of
[tex]C_{10}H_8(g) --> C_{10}H_8(s), F_3BNH_3(g) --> BF_3(g) + NH_3(g),\\ and\ CS_2(g) + 4H_2(g) --> CH_4(g) + 2H_2S(g)[/tex]
have negative values for ΔS. These reactions involve the formation of solids or liquids, and the system becomes more ordered during the reaction. The entropy of the products is lower than the entropy of the reactants, so the ΔS is negative.
To learn more about chemical reaction :
https://brainly.com/question/30265799
#SPJ11
Based on the 49 CFR HAZMAT Table, what is the hazard class for an item with the proper shipping name: Corrosive solids, n.o.s.?
The hazard class for an item with the proper shipping name of Corrosive solids, n.o.s. is Class 8 - Corrosive.
This means that the item poses a hazard to people and the environment due to its corrosive properties and requires special handling and shipping precautions to ensure safety.
Based on the 49 CFR HAZMAT Table, the hazard class for an item with the proper shipping name "Corrosive solids, n.o.s." (not otherwise specified) is Hazard Class 8. This class indicates that the substance is corrosive and poses a hazard during shipping due to its potential to cause damage to living tissues or other materials it comes into contact with.
To know more about Hazard click here .
brainly.com/question/29602984
#SPJ11
The rate of appearance of NH3(Δ[NH3]Δt) was determined to be 2.5 x 10-4 atm/s in a particular experiment.
Calculate the rate of disappearance of nitrogen in atm/s.
N2(g)+3H2(g)→2NH3(g)
The rate of appearance of NH3(Δ[NH3]Δt) was determined to be 2.5 x 10-4 atm/s in a particular experiment
With the help of balanced chemical equation
N2(g)+3H2(g)→2NH3(g)
The molar ratio between N2 and NH3 is 1:2. Therefore, for every 1 mole of N2 that disappears, 2 moles of NH3 are formed.
To find the rate of disappearance of N2, we need to use the stoichiometry of the reaction.
Rate of appearance of NH3 is equal to 2.5 x 10-4 atm/s
With the help of given chemical equation, we know that the rate of disappearance of N2 is 1/3 of the rate of appearance of NH3.
Rate of disappearance of N2 = (1/3) x 2.5 x 10^-4 atm/s
Rate of disappearance of N2 = 8.33 x 10^-5 atm/s
Hence, the rate of disappearance of nitrogen is 8.33 x 10^-5 atm/s.
To know more about experiment here
https://brainly.com/question/21882353
#SPJ4