Please helppppppp!!!!!!

Answer:

The appropriate solution is "2.78 mm".

Explanation:

Given:

[tex]\lambda = 720 \ nm[/tex]

or,

  [tex]= 720\times 10^{-9} \ m[/tex]

[tex]D=0.85 \ m[/tex]

[tex]d = 0.22 \ mm[/tex]

or,

  [tex]=0.22 \times 10^{-3} \ m[/tex]

As we know,

Fringe width is:

⇒ [tex]\beta=\frac{\lambda D}{d}[/tex]

hence,

Separation between second and third bright fringes will be:

⇒ [tex]\theta=\beta=\frac{\lambda D}{d}[/tex]

       [tex]=\frac{720\times 10^{-9}\times 0.85}{0.22\times 10^{-3}}[/tex]

       [tex]=2.78\times 10^{-3} \ m[/tex]

or,

       [tex]=2.78 \ mm[/tex]

Answer:

If we convert a circuit into a current source with parallel load it is called source transformation

Answer:

amplitude

Explanation:

The loudness of a musical sound is a measure of the sound wave's ?

is amplitude explanation:- The loudness of a sound depends upon the amplitude.Loudness of a sound depends on the amplitude of the vibration producing that sound. Greater is the amplitude of vibration, louder is the sound produced by it. if you find this answer helpful please rate positive thank you so much.

This question is incomplete, the complete question is;

Suppose that the position of a particle is given by s=f(t)=5t³ + 6 t+ 9.

(a) Find the velocity at time t.

(b) Find the velocity at time t=3 seconds

Answer:

a) the velocity at time t is ( 15t² + 6 ) m/s

b) Velocity at time t=3 seconds is 141 m/s

Explanation:

Give the data in the question;

position of a particle is given by;

s = f(t) = 5t³ + 6t + 9

Velocity at t;

we differentiate with respect to t

so

V(t) = f'(t) = d/dt ( 5t³ + 6t + 9 )

V(t) = f(t) = 5(3t²) + 6(1) + 0 )

V(t) = f(t) = ( 15t²+6 ) m/s

Therefore, the velocity at time t is 15t²+6 m/s

b) Velocity at t = 3 seconds

V(t) = f(t) = ( 15t²+6 ) m/s

we substitute

V(3) = ( 15(3)² + 6 ) m/s

V(3) = ( (15 × 9) + 6 ) m/s

V(3) = ( 135 + 6 ) m/s

V(3) = 141 m/s

Therefore, Velocity at time t=3 is 141 m/s

“The magnification produced by a spherical mirror is -3”. List four information you obtain from this statement about the mirror/image.

Answer:

b. 200N c. 100N

Explanation:

30.

the horizontal. The force needed to push the body up the plane is

Answer:

acceleration is measured

Answer:

I = 1.58 x 10⁻³ watt/m²

Explanation:

Here, we will use the following formula:

[tex]\beta = 10\ log_{10}(\frac{I}{I_o})[/tex]

where,

β = decibel level = 92 dB

I = Intenisty of sound in watt/m² = ?

I₀ = reference intensity = 10⁻¹² watt/m²

Therefore,

[tex]92\ dB =10\ log_{10}(\frac{I}{10^{-12}\ watt/m^2} )\\\\[/tex]

[tex]10^{9.2} = \frac{I}{10^{-12}}\ watt/m^2\\\\I = (1.58\ x\ 10^9)(10^{-12}\ watt/m^2)[/tex]

I = 1.58 x 10⁻³ watt/m²

Answer:

Option D

Explanation:

From the question we are told that:

The attractive magnetic force per unit length as

 [tex]f = F/L[/tex]

Separation Distance [tex]x=2d[/tex]

Generally the equation for  Magnetic force between two current carrying wire is mathematically given by

[tex]\frac{F}{\triangle l}=\frac{\mu_0I_1I_2}{\mu \pi x}[/tex]

[tex]\frac{F}{\triangle l }=\frac{I_1I_2}{ x}[/tex]

Where

[tex]x=2r[/tex]

And

[tex]I_1=I_2=>2I[/tex]

Then

[tex]\frac{F}{\triangle l}=>\frac{2*2}{2}*f[/tex]

[tex]\frac{F}{\triangle l}=>2f[/tex]

Therefore s the force per unit length between the wires if their separation is 2d

[tex]\frac{F}{\triangle l}=>2f[/tex]

Option D

Answer:

(a) I = 1650000 A

(b) 4.125 T

Explanation:

Magnetic field, B = 5.5 T

distance, r = 0.06 m

(a) Let the current is I.

The magnetic field due to a long wire is given by

[tex]B =\frac{\mu o}{4\pi }\frac{2 I}{r}\\5.5= 10^{-7}\times \frac{2\times I}{0.06}\\I =1650000 A[/tex]

(b) Let the magnetic field is B' at distance r = 0.08 m.

[tex]B =\frac{\mu o}{4\pi }\frac{2 I}{r}\\B = 10^{-7}\times \frac{2\times 1650000}{0.08}\\B'= 4.125 T[/tex]

Answer:

circuit breaker

Explanation:

A circuit breaker is a device used for electrical safety. It consists of a switch designed to protect an electrical circuit from damage that may result from heating due to overload in the circuit.

Its basic function is to interrupt current flow through its switch that consists of metal stripe which bends when it gets hot.

Fuse has similar action with circuit breaker, the only difference is that fuse can only be used once because it melts when it gets hot.

Therefore, the correct answer is "circuit breaker"

Answer:

T = 17649.03 N = 17.65 KN

Explanation:

The tension in the cable must be equal to the apparent weight of the passenger. For upward acceleration:

[tex]T = W_A = m(g+a)\\[/tex]

where,

T = Tension in cable = ?

[tex]W_A[/tex] = Apparent weight

m = mass = 1603 kg

g = acceleration due to gravity = 9.81 m/s²

a = acceleration of elevator = 1.2 m/s²

Therefore,

[tex]T = (1603\ kg)(9.81\ m/s^2+1.2\ m/s^2)\\\\[/tex]

T = 17649.03 N = 17.65 KN

Answer:

Y = 5.03 x 10⁻³ m = 5.03 mm

Explanation:

Using Young's Double-slit formula:

[tex]Y = \frac{\lambda L}{d}[/tex]

where,

Y = Fringe Spacing = Width of bright fringe = ?

λ =  wavelength = 633 nm = 6.33 x 10⁻⁷ m

L = Screen distance = 3.1 m

d = slit width = 0.39 mm = 3.9 x 10⁻⁴ m

Therefore,

[tex]Y = \frac{(6.33\ x\ 10^{-7}\ m)(3.1\ m)}{3.9\ x\ 10^{-4}\ m}[/tex]

Y = 5.03 x 10⁻³ m = 5.03 mm

Explanation:

Write what you know

Speed = Distance / Time

micro- = 10^-6

write your conversions as fractions

1 in / 0.0254 m

1 min / 60 sec

First convert time to regular seconds

7.4 x 10^-6 seconds

Use Velocity

1.49m / (7.4 x 10^-6) s

We've written our conversions in fractions because units cancel out just like numbers

[tex] \frac{1.49m}{7.4 \times {10}^{ - 6} } \times \frac{1in}{0.0254m} \times \frac{60sec}{1min} [/tex]

Multiply all the fractions accross and youll have your answer

Momentum = (mass) x (speed)

If you work the problem in the same units as the given data, then you get the momentum in units of kilogram-meters per second, and your horse has 1,440 of them.

Answer:

A

Explanation:

1440 kg*m/s

Answer:

[tex]P_a=17.85psi[/tex]

Explanation:

From the question we are told that:

Tank Pressure [tex]P_t=30.0kpa[/tex]

Atmospheric Pressure [tex]P_a=13.5 psi[/tex]

Where

 [tex]1kpa=0.148psi[/tex]

Therefore

 [tex]30kpa=4.35psi[/tex]

Generally the equation for Absolute pressure [tex]P_a[/tex] is mathematically given by

 [tex]P_a=13.5+4.35[/tex]

 [tex]P_a=17.85psi[/tex]

Answer:

bvihobonlnohovicjfufufufucvkvkvvjcufufydyfuvi

[tex]\sf{The~ different~ types~ of~ measuring~ instruments~ are:-}[/tex]

Answer:

a)   w = 31.4 rad / s,  b)  a = 118.4 m / s²

Explanation:

a) let's reduce to the SI system

   w = 5 rev / s (2pi rad / 1 rev)

   w = 31.4 rad / s

b) the expression for the centripetal acceleration is

      a = v² / r

linear and angular variables are related

      v = w r

    we substitute

     a = w² r

     a = 31.4² 0.120

     a = 118.4 m / s²

Complete question:

while hunting in a cave a bat emits sounds wave of frequency 39 kilo hartz were moving towards a wall with a constant velocity of 8.32 meters per second take the speed of sound as 340 meters per second. calculate the frequency​ reflected off the wall to the bat?

Answer:

The frequency reflected by the stationary wall to the bat is 41 kHz

Explanation:

Given;

frequency emitted by the bat, = 39 kHz

velocity of the bat, [tex]v_b[/tex] = 8.32 m/s

speed of sound in air, v = 340 m/s

The apparent frequency of sound striking the wall is calculated as;

[tex]f' = f(\frac{v}{v- v_b} )\\\\f' = 39,000(\frac{340}{340 -8.32} )\\\\f' = 39978.29 \ Hz[/tex]

The frequency reflected by the stationary wall to the bat is calculated as;

[tex]f_s = f'(\frac{v + v_b}{v} )\\\\f_s = 39978.29(\frac{340 + 8.32}{340} )\\\\f_s = 40,956.56 \ Hz[/tex]

[tex]f_s\approx 41 \ kHz[/tex]

Answer:

a)   a = 34.375 m / s²,  b)    v_f = 550 m / s

Explanation:

This problem is the launch of projectiles, they tell us to ignore the effect of the friction force.

a) Let's start with the final part of the movement, which is carried out from t= 16 s with constant speed

             v_f = [tex]\frac{x-x_1}{t}[/tex]

we substitute the values

             v_f = [tex]\frac{ 6600 -x_1}{4}[/tex]  

The initial part of the movement is carried out with acceleration

             v_f = v₀ + a t

             x₁ = x₀ + v₀ t + ½ a t²

the rocket starts from rest v₀ = 0 with an initial height x₀ = 0

             x₁ = ½ a t²

             v_f = a t

we substitute the values

              x₁ = 1/2  a 16²

              x₁ = 128 a

              v_f = 16 a

let's write our system of equations  

               v_f = [tex]\frac{6600 - x_1}{4}[/tex]

               x₁ = 128 a

               v_f = 16 a

we substitute in the first equation  

               16 a = [tex]\frac{6600 -128 a}{4}[/tex]

               16 4 a = 6600 - 128 a

                a (64 + 128) = 6600

                a = 6600/192

                 a = 34.375 m / s²

b) let's find the time to reach this height

                x = ½ to t²

                t² = 2y / a

                t² = 2 5100 / 34.375

                t² = 296.72

                t = 17.2 s

We can see that for this time the acceleration is zero, so the rocket is in the constant velocity part

               v_f = 16 a

               v_f = 16 34.375

               v_f = 550 m / s

The type of model shown here is an experimental model. The correct option is B.

Animals are used in experimental modeling to model the development and progression of diseases and to test new treatments before they are administered to humans.

This result stems from the distinction that, whereas experiments are versions of the real world captured within an artificial laboratory environment, models are artificial worlds constructed to represent the real world.

Theories are plausible explanatory propositions developed to connect potential causes to their effects.

Models are schematic representations of reality or one's view of a possible world that are built to improve one's understanding of the world and/or to make predictions.

Thus, the correct option is B.

For more details regarding model, visit:

https://brainly.com/question/28381011

#SPJ7

Your question seems incomplete, the probable complete question is:

Answer:

a) the wavelength that the light emits is 6.1875 × 10⁻⁷ m

b) the distance between the two n = 1 dark fringes is 5.5 × 10⁻³ m

Explanation:

Given the data in the question;

separation  between two slits  d = 0.36 mm = 0.00036 m

Separation between two adjacent fringes β = 5.5 mm = 0.0055 m

Distance of screen from slits D = 1.6 m

n = 2

a) the wavelength the light emits;

Using the formula;

β = (nD/d)λ

To find wavelength, we make λ the subject of formula;

βd = nDλ

λ = βd / nD

so we substitute

λ = ( 0.0055 m × 0.00036 m ) / ( 2 × 1.6 m )

λ = 0.00000198 / 3.2

λ = 6.1875 × 10⁻⁷ m

Therefore, the wavelength that the light emits is 6.1875 × 10⁻⁷ m

b) the distance between the two n = 1 dark fringes;

To find the distance between the two n = 1 dark fringes, we use the following formula;

y[tex]_m[/tex] = 2nλD / d

given that n = 1, we substitute

y[tex]_m[/tex] = ( 2 × 1 × ( 6.1875 × 10⁻⁷ m ) × 1.6 m ) / 0.00036 m

y[tex]_m[/tex] = 0.00000198 / 0.00036

y[tex]_m[/tex] = 0.0055 m

y[tex]_m[/tex] = 5.5 × 10⁻³ m

Therefore, the distance between the two n = 1 dark fringes is 5.5 × 10⁻³ m

Answer: The magnetic field at a point 1.0 cm from the central axis of the solenoid is 0.0276 T.

Explanation:

Given: Length = 0.50 m

No. of turns = 500

Current = 22 A

Formula used to calculate magnetic field is as follows.

[tex]B = \mu_{o}(\frac{N}{L})I[/tex]

where,

B = magnetic field

[tex]\mu_{o}[/tex] = permeability constant = [tex]4\pi \times 10^{-7} Tm/A[/tex]

N = no. of turns

L = length

I = current

Substitute the values into above formula as follows.

[tex]B = \mu_{o}(\frac{N}{L})I\\= 4 \pi \times 10^{-7} Tm/A \times (\frac{500}{0.5 m}) \times 22\\= 0.0276 T[/tex]

Thus, we can conclude that magnetic field at a point 1.0 cm from the central axis of the solenoid is 0.0276 T.

the earth is on the month of June

Answer: [tex]115.52\ N[/tex]

Explanation:

Given

Length of plank is 1.6 m

Force [tex]F_1[/tex] is applied on the left side of plank

Force [tex]F_2[/tex] is applied 43 cm from the left end O.

Mass of the plank is [tex]m=13.7\ kg[/tex]

for equilibrium

Net torque must be zero. Taking torque about left side of the plank

[tex]\Rightarrow mg\times 0.8-F_2\times 0.43=0\\\\\Rightarrow F_2=\dfrac{13.7\times 9.8\times 0.8}{0.43}\\\\\Rightarrow F_2=249.78\ N[/tex]

Net vertical force must be zero on the plank

[tex]\Rightarrow F_1+W-F_2=0\\\Rightarrow F_1=F_2-W\\\Rightarrow F_1=249.78-13.7\times 9.8\\\Rightarrow F_1=115.52\ N[/tex]