Julie I'm here so help me I'm red

Answer:

In Python:

#1

service = input("Enter desired auto service: ")

print("You entered: "+service)

#2

if service.lower() == "oil change":

   print("Cost of oil change: $35")

elif service.lower() == "car wash":

   print("Cost of car wash: $7")

elif service.lower() == "tire rotation":

   print("Cost of tire rotation: $19")

else:

   print("Invalid Service")

Explanation:

First, we prompt the user for the auto service

service = input("Enter desired auto service: ")

Next, we print the service entered

print("You entered: "+service)

Next, we check if the service entered is available (irrespective of the sentence case used for input). If yes, the cost of the service is printed.

This is achieved using the following if conditions

For Oil Change

if service.lower() == "oil change":

   print("Cost of oil change: $35")

For Car wash

elif service.lower() == "car wash":

   print("Cost of car wash: $7")

For Tire rotation

elif service.lower() == "tire rotation":

   print("Cost of tire rotation: $19")

Any service different from the above three, is invalid

else:

   print("Invalid Service")

Answer:

Following are the analogies to this question:

Explanation:

In each match, the group is a comparison because there may be a tie situation, which already implies, that its triage was unabated, 1 means the best team, and n means the worst team.

It makes it much easier to address whether another 'Quick Sort' or even the 'Merge Sort' issue by converting the very same problem throughout the number problem.

All the cases use for the Merge Sort, in which it utilizes its evenly divide or overcome strategy where the category is reciprocally divided into two parts where the number becomes measured at n==2, and the outcome extends.

Assume we get 7 squads:

2 4 5 4 3 1 6

Recursively split the above teams:

2 4 5 4 3 1 6

2 4 5 4 3 1 6

We'll equate such figures with base-case (n==2) (have a match against each other)

2 4 4 5 1 3 6 (number of matches 1(2,4) + 1(5,4) + 1(3,1) = 3)

Now the division is combined.

1, 2 ,3, 4, 4, 5

NLogN was its best time complexity of an algorithm but N is the lot of clubs.

Answer:

String longest = "";

Explanation:

The initialization that would allow the method to work as intended would be the following

String longest = "";

This is because the method is looping through the array provided as an argument and comparing each word in the array with the word saved inside the variable called longest. The length of both are compared and if the word in the array is longer than the string saved in the variable longest then it is overwritten with the word in the array.

Answer:

In Python:

import random

lotterylist = []

for number in range(7):

   lotterylist.append(random.randint(0,9))

for number in lotterylist:

   print(number, end = ', ')

Explanation:

This line imports the random library

import random

This line creates an empty list

lotterylist = []

The instructions in this loop will be performed 7 times

for number in range(7):

This line generates a random number between 0 and 9 (inclusive) and then appends the number into lotterylist

   lotterylist.append(random.randint(0,9))

This iterates through lotterylist    

for number in lotterylist:

This prints the content of the list on a line (seperated by comma)

   print(number, end = ', ')

A computer is a programmable device that can automatically perform a sequence of calculations or other operations on data once programmed for the task. It can store, retrieve, and process data according to internal instructions. A computer may be either digital, analog, or hybrid, although most in operation today are digital. Digital computers express variables as numbers, usually in the binary system. They are used for general purposes, whereas analog computers are built for specific tasks, typically scientific or technical. The term "computer" is usually synonymous with digital computer, and computers for business are exclusively digital.

The core, computing part of a computer is its central processing unit ( CPU), or processor. ... A computer system, therefore, is a computer combined with peripheral equipment and software so that it can perform desired functions.

Give brainliest please:)

Answer:

i dont get what you are trying to ask

Explanation:

Answer:

Grace Hopper.

Explanation:

Grace Hopper was a US Naval Rear Admiral and an American computer scientist who was born on the 9th of December, 1906 in New York city, United States of America. She worked on the first commercial computer known as universal automatic computer (UNIVAC), after the second World War II.

In 1953 at the Remington Rand, Grace Hopper invented the first high-level programming language for UNIVAC 1 by using words and expressions.

Additionally, the high-level programming language known as FLOW-MATIC that she invented in 1953 paved the way for the development of common business-oriented language (COBOL).

Hence, Grace Hopper developed the first compiler and conducted work that led to the development of COBOL.

Answer:

what?ㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤ

Answer:

D

Explanation:

You can expect to see ________.

A. STOP signs or traffic lights on limited access highways

B. only traffic lights on limited access highways

C. only STOP signs on limited access highways

D. no STOP signs or traffic lights on limited access highways

Answer:

It began as a project of the Department of Defense.

Explanation:

The first known and recorded prototype of the internet that was workable arrived during the 1960s when the Advanced Research Projects Agency Network (ARPANET) was created. The project was initially funded by the United States Department of Defense and ARPANET allowed for packet switching, to ensure multiple computers were able to communicate on a single network

Answer:

The answer is B hierchary protocal

Answer:

its network protocol

Explanation:

I got it right

Answer:

In Python:

hh = int(input("Hour: ")) * 3600

mm = int(input("Minutes: ")) * 60

ss = int(input("Seconds: "))

seconds = int(input("Additional Seconds: "))

time = hh+ mm + ss + seconds

hh =  int(time/3600)

time = time - hh * 3600

mm = int(time/60)

ss = time - mm * 60

while(hh>24):

   hh = hh - 24

print(str(hh)+" : "+str(mm)+" : "+str(ss))

Explanation:

We start by getting the time of the day. This is done using the next three lines

hh = int(input("Hour: ")) * 3600

mm = int(input("Minutes: ")) * 60

ss = int(input("Seconds: "))

Then, we get the additional seconds

seconds = int(input("Additional Seconds: "))

The new time is then calculated (in seconds)

time = hh+ mm + ss + seconds

This line extracts the hours from the calculated time (in seconds)

hh =  int(time/3600)

time = time - hh * 3600

This line extracts the minutes from the calculated time (in seconds)

mm = int(time/60)

This line gets the remaining seconds

ss = time - mm * 60

The following iteration ensures that the hour is less than 24

while(hh>24):

   hh = hh - 24

This prints the calculated time

print(str(hh)+" : "+str(mm)+" : "+str(ss))

Answer: the top 3 are Microsoft word

                                     Microsoft Excel

                                     Microsoft PowerPoint

Explanation:

Answer:

In Python:

year = int(input("Year: "))

if (year % 4) == 0:

  if (year % 100) == 0:

      if (year % 400) == 0:

          print("Leap year")

      else:

          print("Not a leap year")

  else:

      print("Leap year")

else:

  print("Not a leap year")

Explanation:

This line prompts user for year

year = int(input("Year: "))

This condition checks if input year is divisible by 4

if (year % 4) == 0:

If yes, this condition checks if input year is divisible by 100

  if (year % 100) == 0:

If yes, this condition checks if input year is divisible by 400

      if (year % 400) == 0:

If divisible by 4, 100 and 400, then it is a leap year

          print("Leap year")

      else:

If divisible by 4 and 100 but not 400, then it is not a leap year

          print("Not a leap year")

  else:

If divisible by 4 but not 100, then it is a leap year

      print("Leap year")

else:

If it is not divisible by, then it is not a leap year

  print("Not a leap year")

Answer:

isn't it already showing it if not put text box

Explanation:

Answer:

Create a small, collapsible navigation bar at the top of the home page so users can see new topics without scrolling

Explanation:

By so doing the user experience on the website would be improved because, instead of struggling through several pages to read through discussion threads, they can simply click on the navigation bar and pick a discussion topic that interests them.

Answer:

See Explanation

Explanation:

Given

See attachment 1 for proper table definition

To answer this question, one of the basic sql commands (the "create" command) will be used to create the required table, followed by the fields of the table.

I could not submit my answer directly. So, I added two additional attachments which represent the answer section and the explanation section, respectively.

Answer:

Pre-order: Kirk, Chekov, Khaaaan, Spock, Scotty, McCoy, Sulu, Uhuru

In-order: Chekov, Khaaaan, Kirk, McCoy, Scotty, Spock, Sulu, Uhuru

Post-order: Khaaaan, Chekov, McCoy, Scotty, Sulu, Uhuru, Spock, Kirk

Explanation:

The binary search tree is described in the diagram below.

The pre-order traversal of the binary tree gets the root, then the left node and right node. The in-order traversal picks the left node, the root node, and then the right node while the post-order traversal of the binary tree follows the left node, right node, and then the root node.

with what?

----------------------------------------------------

Answer:

Please Add a Picture

Explanation:

We are unable to help you if you do not know how please notify me!

Answer:

fraction = input("enter fraction x/y: ")

if len(fraction) == 3:

   if fraction[1] == "/":

       try:

           num = int(fraction[0])

           den = int(fraction[2])

           if num < den:

               print(f"{num}/{den} is a proper fraction")

           else:

               if num% den == 0

                   print(f"{num}/{den} is an improper fraction and can be reduced to {num/den}")

               else:

                   print(f"{num}/{den} is an improper fraction and can be reduced to {num//den} + {num - (den * (num//den))}/{den}")

       except ValueError:

           print("numerator and denominator must be integer numbers")

Explanation:

The try and except statement of the python program is used to catch value error of the input fraction of values that are not number digits. The program converts the numerator and denominator string values to integers and checks for the larger value of both.

The program prints the fraction as a proper fraction if the numerator is lesser and improper if not.

Answer:

The program outputs 123

Explanation:

The first line of the program initializes s1 to 20

The second line checks if s1 is less than or equal to 20.

This is true,

So, 1 is printed

The third line checks if s1 is less than or equal to 40.

This is true,

So, 2 is printed

The fourth line checks if s1 is less than or equal to 20.

This is true,

So, 3 is printed

Hence, the output is 123

Answer:

An array.

Explanation:

An array can be defined as a structure that organizes data in a list that is commonly 1-dimensional or 2-dimensional.

Simply stated, an array refers to a set of memory locations (data structure) that comprises of a group of elements with each memory location sharing the same name. Therefore, the elements contained in array are all of the same data type e.g strings or integers.

Basically, in computer programming, arrays are typically used by software developers to organize data, in order to search or sort them.

Binary search is an efficient algorithm used to find an item from a sorted list of items by using the run-time complexity of Ο(log n), where n is total number of elements. Binary search applies the principles of divide and conquer.

In order to do a binary search on an array, the array must first be sorted in an ascending order.

Hence, array elements are mainly stored in contiguous memory locations on computer.

Answer:

def cal_time(distance, speed):

   time = distance / speed

   hour = str(time)[0]

   minutes = round(float(str(time)[1:]) * 60)

   print(f"The time taken to cover {distance}miles is {hour}hours, {minutes}minutes")

miles = [5, 10, 13.1, 26.2]

myspeed = int(input("Enter user speed: "))

for mile in miles:

   cal_time(mile, myspeed)

Explanation:

The python program prints out the time taken for a runner to cover the list of distances from 5 miles to a full marathon. The program prompts for the speed of the runner and calculates the time with the "cal_time" function.

Answer:

weight = float(input("Enter the weight of the package: "))

distance = float(input("Enter the distance to be sent: "))

weight_charge = 0

if weight <= 2:

   weight_charge = 0.25

elif 2 < weight <= 10:

   weight_charge = 0.3

elif 10 < weight <= 20:

   weight_charge = 0.45

elif 20 < weight <= 50:

   weight_charge = 1.75

if int(distance / 100) == distance / 100:

  d = int(distance / 100)

else:

   d = int(distance / 100) + 1

total_charge = d * weight_charge

print("The charge is $", total_charge)

Explanation:

*The code is in Python.

Ask the user to enter the weight and distance

Check the weight to calculate the weight_cost for 100 miles. If it is smaller than or equal to 2, set the weight_charge as 0.25. If it is greater than 2 and smaller than or equal to 10, set the weight_charge as 0.3. If it is greater than 10 and smaller than or equal to 20, set the weight_charge as 0.45. If it is greater than 20 and smaller than or equal to 50, set the weight_charge as 1.75

Since those charges are per 100 miles, you need to consider the distance to find the total_charge. If the int(distance / 100) is equal to (distance / 100), you set the d as int(distance / 100). Otherwise, you set the d as int(distance / 100) + 1. For example, if the distance is 400 miles, you need to multiply the weight_charge by 4, int(400/100) = 4. However, if the distance is 410, you get the int(400/100) = 4, and then add 1 to the d for the extra 10 miles.

Calculate the total_charge, multiply d by weight_charge

Print the total_charge

Answer:

Follows are the code to this question:

def dic_sorted(data):#defining a method print_dic_sorted

   s = data.split()#defining a variable that use split method

   d = {} #defining a dictionary

   alpha = '0123456789abcdefghijklmnopqrstuvwxyz' #defining a variable alpha that hold english alphabets values

 for k in alpha:#defining for loop that stores values in the dictionary

       d[k]= set()# use dictionary to set value in list

   for i in s:# defining for loop to convert value in lower case

       i = i.lower()  #convert value into lower case by using lower method  

       a = i[0]# adding value into dictionary

       d[a].add(i) # use add method to hold value in dictionary

   for k,v in sorted(d.items()):#use for loop to convert value in assending order

       if len(d[k])!=0: #use if block to check length of dictionary  

           print(k,":", sorted(v))#use print to sort value            

f_name = 'input.txt'#defining a variable that open file  

with open(f_name) as fi:#use open method to read file

   data = fi.read()    # read file data

   dic_sorted(data)#calling method  

output:

please find the attached file.

Explanation:

In the code, the "dic_sorted" method is used, which accepts a data variable as a parameter, and inside the method, a split method and an empty dictionary are defined, that converts and holds the value by alphabetical order, for this it defines three for loops.

In the first for loop, it holds a value in the dictionary, and in the second loop it converts a value into the lower case, and in the third loop, it stores the value in its alphabetical order.

Answer:

Card style

Explanation:

Microsoft Word refers to a word processing software application or program developed by Microsoft Inc. to enable its users type, format and save text-based documents.

In Microsoft Word 2019, the users are availed with the ability to edit the word document in the following view type;

I. View Mode.

II. Print Mode.

III. Drift Layout.

Generally, end users are able to print a hard copy (physical copy) of the word document they created through the use of a printer.

In this scenario, Stacy plans to print her contacts and would like to choose an option that will print select information for each contact in a business card format. Therefore, the option she should choose is Card style.

The Card style is designed to present informations in a grid-like format or landscape arrangement.

Answer:

A method's local variables are discarded upon a method's return; each new call creates new local variables in memory.

Explanation:

A local variable can be defined as an argument passed to a function or a variable that is declared within a function and as such can only be used or accessed within the function.

This ultimately implies that, a local variable is effective whilst the function or block is being executed (active).

Basically, all local variables can only be a member of either the register storage, static or auto (dynamic) categories in computer programming.

The true statement regarding how methods work is that a method's local variables are discarded upon a method's return; each new call creates new local variables in memory. This is so because these local variables are only allocated a storage that is within the frame of the method which is being executed on the run-time stack and would be discarded upon a method's completion or return.

Statement that is true regarding how methods work is :A method's local variables are discarded upon a method's return; each new call creates new local variables in memory.

A local variable serves as a  variable which can be accessible within a particular part of a program.

These variables are usually defined  within that routine and it is regarded as been local to a subroutine.

We can conclude that in method's local variables it is possible for each new call creates new local variables in memory.

Learn more about method's local variables at:

https://brainly.com/question/19025168

Answer:

Explanation:

The following code is written in Python. It is a function called divide_by_x and takes the user inputs as described. It then raises x to the third power and divides user_num by that number. This gives the same result as user_num divided by x three times. The answer is saved in the variable answer which is then returned to the user.

def divide_by_x(user_num, x):

   answer = user_num / (x**3)

   return answer

The program is an illustration of the division arithmetic operation.

The program in Python, where comments are used to explain each line is as follows:

#This gets input for user_num

user_num = int(input())

#This gets input for x

x = int(input())

This loop is repeated three times

for i in range(1,4):

       #This divides user_num by x, each time

       user_num /= x

       #This prints the required output

       print(user_num)

At the end of the program, user_num is divided three times by x and then printed.

Read more about similar programs at:

https://brainly.com/question/17277570

Answer:

If you do not know you are a brain in a vat, you do not have hands.

Explanation:

This premise is plausible as to understand the handless brain which is floating in a vat. The brain is connected to a super computer and it transmits messages to the brain. The brain receives those message and give signals to perform tasks.

Answer:

Condition one - 1 time

Condition two - 2 times

Explanation:

Given

The above code segment

Required

Determine the number of times each print statement is executed

For condition one:

The if condition required to print the statement is:  if (arr[row][col] >= arr[row][col - 1])

For the given data array, this condition is true only once, when

[tex]row = 1[/tex]  and  [tex]col = 2[/tex]

i.e.

if(arr[row][col] >= arr[row][col - 1])

=> arr[1][2] >= arr[1][2 - 1]

=> arr[1][2] >= arr[1][1]

=> 5 >= 3 ---- True

The statement is false for other elements of the array

Hence, Condition one is printed once

For condition two:

The if condition required to print the statement is:  if (arr[row][col] % 2 == 0)

The condition checks if the array element is divisible by 2.

For the given data array, this condition is true only two times, when

[tex]row = 0[/tex]  and  [tex]col = 1[/tex]

[tex]row = 1[/tex]  and  [tex]col = 0[/tex]

i.e.

if (arr[row][col] % 2 == 0)

When [tex]row = 0[/tex]  and  [tex]col = 1[/tex]

=>arr[0][1] % 2 == 0

=>2 % 2 == 0 --- True

When [tex]row = 1[/tex]  and  [tex]col = 0[/tex]

=>arr[1][0] % 2 == 0

=> 4 % 2 == 0 --- True

The statement is false for other elements of the array

Hence, Condition two is printed twice

Answer:

Following are the class definition code to this question:

class UpdatedBook : BookInfo//defining a class UpdatedBook that inherits the BookInfo class

{

   public:

   int edition_Number;//defining an integer variable

   UpdatedBook (string title,string author,int edition):BookInfo(b_title,b_author)//defining a constructor that  

   {

       edition_Number=edition;

   }

   int getEdition_Number()

   {

   return edition_Number;

   }

};

Explanation:

In this question, the "BookInfo" class is not defined, that's why we define this code as above.

In this code, a class "UpdatedBook" is defined that inherits its base class "BookInfo" inside the "UpdatedBook" class an integer variable "edition_Number" is declared, which is used to holding the integer value.

In the next step, a parameterized constructor is declared, that accepts a three-parameter and also inherits its base class parameterized constructor, and at the last, a get method is used that returns the edition number value.