Answer:
Concentration of H3O⁺ [H3O⁺] = 0.864 M
Explanation:
Given that:
The mass concentration of MO = 43 g/L
The volume of MO = 7.9 mL = 7.9 × 10⁻³ L
Recall that
The mass number of MO = Mass concentration of MO × Volume of MO
The mass number of MO = (43 g/L) * (7.9 × 10⁻³ L)
The mass number of MO = 0.3397 g
number of moles of MO = (mass number of MO) / (molar mass of MO)
number of moles of MO = (0.3397 g) / (327.33 g/mol)
moles of MO = 0.00104 mol
The total volume = 7.9 mL + 3.13 mL + 5.49 mL + 3.43 mL
The total volume = 19.95 mL = 19.95 × 10⁻³ L
Concentration of MO [MO} =(number of moles of MO) / (total volume)
[MO] = 0.00104 mol / 19.95 × 10⁻³ L
[MO] = 5.2130 × 10⁻⁸ M
the number of moles of H3O⁺ = molarity of HCl in the solution × the volume of HCl in solution
the number of moles of H3O⁺ = [(2.0 M) * (3.13 mL)] + [(2.0 M) * (5.49 mL)]
the number of moles of H3O⁺ = 17.24 mmol
Concentration of H3O⁺ [H3O⁺] = (the number of moles of H3O⁺) / (total volume)
Concentration of H3O⁺ [H3O⁺] = (17.24 mmol) / (19.95 mL)
Concentration of H3O⁺ [H3O⁺] = 0.864 M
The Concentration of H3O⁺ [H3O⁺] is 0.864 M
Calculation of the H3O⁺ concentration:But before that following calculations should be needed.
The mass number of MO = Mass concentration of MO × Volume of MO
= (43 g/L) * (7.9 × 10⁻³ L)
= 0.3397 g
Now
number of moles of MO = (mass number of MO) / (molar mass of MO)
= (0.3397 g) / (327.33 g/mol)
= 0.00104 mol
Now
The total volume = 7.9 mL + 3.13 mL + 5.49 mL + 3.43 mL
= 19.95 mL
= 19.95 × 10⁻³ L
Now
Concentration of MO [MO} =(number of moles of MO) / (total volume)
= 0.00104 mol / 19.95 × 10⁻³ L
5.2130 × 10⁻⁸ M
Now
the number of moles of H3O⁺ = molarity of HCl in the solution × the volume of HCl in solution
= [(2.0 M) * (3.13 mL)] + [(2.0 M) * (5.49 mL)]
= 17.24 mmol
Now
Concentration of H3O⁺ [H3O⁺] = (the number of moles of H3O⁺) / (total volume)
= (17.24 mmol) / (19.95 mL)
= 0.864 M
Hence, The Concentration of H3O⁺ [H3O⁺] is 0.864 M
learn more about concentration here: https://brainly.com/question/17844928
help me please, i appreciate it
Answer:
Wind and Hydroelectricity can be considered forms of solar energy.
Explanation:
Wind power is a form of solar energy because winds are caused by the heating of the atmosphere by the sun, the rotation of the Earth, and the Earth's surface irregularities. For as long as the sun shines and the wind blows, the energy produced can be harnessed to send power across the grid.
Hydroelectricity is a form of solar energy because Hydropower relies on the water cycle.
The water cycle has three steps:
Solar energy heats water on the surface of rivers, lakes, and oceans, which causes the water to evaporate.
Water vapor condenses into clouds and falls as precipitation—rain and snow.
Precipitation collects in streams and rivers, which empty into oceans and lakes, where it evaporates and begins the cycle again.
Can you answer both questions please??
The charge on the cobalt ion in the salt CoO is ________.
Answer:
The charge of cobalt in the salt is + 2.
Explanation:
The charge of the salt = 0 . This is because it is neutral.
Charge of cobalt = ?
Charge of oxygen = -2 (This is a constant value, it is -2 only in peroxides)
Charge of salt = Charge of cobalt + Charge of oxygen
0 = x + (-2)
x = + 2
The charge of cobalt in the salt is + 2.
What are the characteristics for natural resources ?
Answer:
The characteristcs of natural resources are commercial and industrial use.
It includes soil, salt, oil, natural gas, coal, iron.
Can someone please help with chemistry? Lead has a density of 10.5 g/cm^3. What is the diameter of a lead ball that has a mass of 500.0g? Report your answer in cm.
In which field(s) is knowledge about how science works important?
A. Medicine
B. All of these are correct
C. Law
D. Politics
E. Agriculture
Answer:B
Explanation:
A solution contains 3.95 g of carbon disulfide (CS2, molar mass = 76.13 g/mol) and 2.43 g of acetone ((CH3)2CO, molar mass = 58.08 g/mol). The vapor pressure of pure carbon disulfide and acetone at 35 oC are 515 torr and 332 torr, respectively. Assuming ideal solution behavior, calculate the vapor pressure of each of the components and the total vapor pressure above the solution. The total vapor pressure above the solution at 35 oC was experimentally determined to be 645 torr. Is the solution ideal? If not, indicate whether the solution deviates from Raoult’s law in a positive or negative manner.
Answer:
Psol = 433 torr
The solution is not ideal and the solution deviates from Raoult's law in a positive manner
Explanation:
The vapout pressure of a solution can be obtained using Raoult's law:
Psol = P°A* XA + P°B*XB
Where Psol is vapour pressure of solution
P° is vapour pressure of pure substance
X is mole fraction
As we have vapour pressure of pure carbon disulfide and acetone we need to find mole fraction of each compound to solve the vapour pressure of the solution:
Moles carbon disulfide:
3.95g CS₂ * (1mol / 76.13g) = 0.05188 moles
Moles acetone:
2.43g acetone * (1mol / 58.08g) = 0.04184 moles
Mole fraction of CS₂:
0.05188 moles / (0.05188mol + 0.04184mol) =
0.5536
Mole fraction acetone:
1 = X(CS₂) + X(Acetone)
X(Acetone) = 1 - 0.5536 = 0.4464
Solving for vapour pressure of the solution:
Psol = 515torr*0.5536 + 332torr*0.4464
Psol = 433 torrAs the experimental vapor pressure was 645torr > 433 torr (Theoretical vapor pressure), the solution is not ideal and the solution deviates from Raoult's law in a positive manner
An object is a regular, rectangular, solid with dimensions of 2 cm by 3cm by 2cm. It has a
mass of 24 g. Find its density.
Answer:
2
Explanation:
Density = mass/volume
m=24
v=2*3*2=12
24/12=2
Answer:
[tex]\boxed {\tt d= 2 \ g/cm^3}[/tex]
Explanation:
Density can be found using the following formula.
[tex]d=\frac{m}{v}[/tex]
where [tex]m[/tex] is the mass and [tex]v[/tex] is the volume.
We know the mass is 24 grams. We must find the volume.
Since it is a rectangle, the volume can be found using the following formula.
[tex]v=l*w*h[/tex]
The length is 2 centimeters, the width is 3 centimeters and the height is 2 centimeters.
[tex]v= 2 \ cm * 3 \ cm * 2\ cm[/tex]
[tex]v= 6 \ cm^2 * 2\ cm[/tex]
[tex]v= 12 \ cm^3[/tex]
Now we know the volume, and can substitute it into the density formula.
[tex]d=\frac{m}{v}[/tex]
[tex]m= 24 \ g\\v= 12 \ cm^3[/tex]
[tex]d=\frac{24 \ g}{12 \ cm^3}[/tex]
[tex]d= 2 \ g/cm^3[/tex]
The density is 2 grams per cubic centimeter.
what is the Si base unit of mass?
what is the base unit/1000 of mass?
what is the base unit×1000 of mass?
what is the base unit of liquid volume? what is the base unit/1000?
what is the base unit×1000?
what is the base unit of temperature? what is the base unit/1000?
what is the base unit×1000?
The SI unit of temperature is the kelvin (K), which spans the same temperature change as the degree Celsius. The Kelvin scale is a thermodynamic scale, meaning that its zero point is at absolute zero rather than the freezing point of water. The second reference point for this scale as it is currently defined is the triple point of water, which is a unique point on the phase diagram of water (a specific combination of pressure and temperature) where ice, liquid water and water vapor are all in equilibrium. The triple point is assigned the temperature of 273.16 K.
The old centigrade scale used the freezing and boiling temperatures of water as its reference points, with one degree centigrade equal to 1/100 of the temperature span between the freezing and boiling points of water. The definition of the Kelvin scale was chosen to make the kelvin the same size as the centigrade degree.
The Celsius scale is defined in terms of the Kelvin scale but is equivalent to the old centigrade scale, which it replaces. It is convenient for reporting weather and cooking temperatures and so on, but is not particularly useful for scientific purposes. For instance, the behavior of gases which approximate ideal gases is such that at zero degrees C they experience a volume change of 1/273 for a one degree change in temperature. This observation provided one of the first indications for the value of absolute zero.
When using the ideal gas law:
PV = nRT
where P is pressure
V is volume
n is the quantity of gas in moles
R is a constant
T is the temperature
it is necessary to use a thermodynamic scale, usually Kelvin.
Another thermodynamic scale, the Rankine scale, has a relationship to the Fahrenheit temperature scale analogous to that between the Kelvin and Celsius scales.
2. Chemical changes often cannot be reversed because they
produce new chemical substances.
TRUE
FALSE
Answer:
True
Explanation:
Answer:
True...
I’ve tooken a test like that before
the study of Mixture
Answer:
Mixtures can be either homogeneous or heterogeneous. A mixture in which its constituents are distributed uniformly is called homogeneous mixture, such as salt in water. A mixture in which its constituents are not distributed uniformly is called heterogeneous mixture, such as sand in water.
Explanation:
Which coupling method is sensitive to temperature changes?
Answer:
Direct coupling
Explanation:
Direct coupling is sensitive to changes that occurs in temperature. It is electrical energy transfer using physical contact through a medium that is conductive.
It is useful in the interconnection of 2 circuits. This kind of coupling method can be done by a wire, a resistor or through mettalic bonding.
state raw material of wood charcoal and coke,lampblack
Answer:
its a tree becoz charcoal came from wood
Estimate the volume of the football. Compare the football to the table tennis balls by dragging the football over the
table tennis balls to assess its size.
The mass of the tennis balls are 2.7(g)
Answer:
4,300
Explanation:
4,300..
Hope this helps ..Explain the role that gravitation played in the formation of the Moon after the large planetesimal hit Earth.
Answer:
The gravity pulled the bits back and formed a ball which is the moon
Explanation:
hope this helps :)
Answer:
While some of the debris from the collision merged back into Earth, the gravity caused the accretion of much of the debris into a separate ball, forming the Moon.
Explanation:
What is the best reason for the scientific community to accept a theory?
Answer:it’s a
Explanation:
The absolute temperature of a fixed mass of ideal gas is tripled while its volume remains constant. The ratio of the final pressure of the gas to its initial pressure is
Answer:
3 : 1
Explanation:
The following data were obtained from the question:
Initial temperature (T₁) = T
Initial pressure (P₁) = P
Final temperature (T₂) = 3T
Final pressure (P₂) =..?
Since the volume is constant, we shall use the following formula P₁ /T₁ = P₂ /T₂ to obtain the final pressure. This is illustrated below:
P₁ /T₁ = P₂ /T₂
P/T = P₂ /3T
Cross multiply
T × P₂ = P × 3T
Divide both side by T
P₂ = P × 3T /T
P₂ = P × 3
P₂ = 3P
Therefore, the final pressure is tripled.
Finally, we shall determine the ratio of the final pressure to the initial pressure as follow:
Initial pressure (P₁) = P
Final pressure (P₂) = 3P
Final pressure (P₂) : Initial pressure (P₁)
P₂ : P₁ => 3P/P
P₂ : P₁ => 3 : 1
Therefore, the ratio of the final pressure to the initial pressure is 3 : 1
Which device involves the use of plasma in technology? arc welder diesel engine incandescent lightbulb battery-operated flashlight
Answer:
arc welder involves use of plasma in technology
The device involves the use of plasma in technology is "arc welder"
What is plasma ?The 4th phase of matter, after solid, liquid, as well as gas, often been referred to as plasma. Inside a particular substance that is solid, liquid, or even gaseous, the electrons typically stick with almost the unique atomic nucleus.
What is arc welder?Using electricity to generate sufficient heat to dissolve metal as well as then allowing the melted metals to cool, arc welding would be a technique for joining metals together.
Arc welding employs the plasma technology principle because the gas would be ionized.
Therefore, the correct answer will be option (a).
To know more about arc welder.
https://brainly.com/question/13158006
#SPJ2
two things we can learn from fossils.
Answer:
fossils come from way back they can be left from dinosaurs and other species
Explanation:
Answer:
Using fossils, you can learn about extinct animals and plants, that's one. Two, you can learn about evolutionary traits and the fact that evolution exists.
Explanation:
what is the difference between ecosystem services natural resources
Answer: Ecosystem services are the flows of benefits which people gain from natural ecosystems, and natural capital is the stock of natural ecosystems from which these benefits flow. So, a forest is a component of natural capital, while climate regulation or timber might be the ecosystem service it provides.
Among the elements magnesium, sodium and silicon, which hås the highest second ionisation
energy? Explain.
Answer:
Explanation:
silicon has highest ionization energy ionization energy increases from left to right in a period because electron are added to same shell and increase in added electron shield each other poorly from the nuclear attraction
Draw the product formed when 2-butanol undergoes reaction with TsCl and Et3N. CH3C6H4SO2Cl.
Answer:
Explanation:
In organic chemistry, the reaction between 2-butanol with TsCl and Et3N is known as the tosylation of the alcohol hydroxyl group. Alcohol is being changed to tosylate by the use of tosyl chloride under the influence of a base. Tosylation of alcohol is an example of a nucleophilic substitution reaction. From the image attached below, we will see how the reaction between 2-butanol proceed into the product by using tosyl chloride and a base(Et3N).
The uncertainty in the measurement 0.0035 mg is:_______ A) + 0.1 mg B) + 0.01 mg C) 0.001 mg D) + 0.0001 mg
Answer:
The correct option is (D).
Explanation:
Uncertainty means lack of certainty in any calculations. It is the quantification of doubts after the calculations are done.
In this problem, we need to find the uncertainty in the measurement 0.0035 mg. There are 4 numbers after decimal. It means uncertain digit 1/10000 is the smallest scale division.
Hence, the uncertainty in the measurement 0.0035 mg is +0.0001 mg
Can someone help me with example #1 please
Answer: 343 K
Explanation:
To convert Celsius to Kelvin, you would add 273 to Celsius.
70°C+273=343 K
Now, we know that 70°C is 343 K.
What does the 2+ mean??
23
A solid is insoluble in water but dissolves in aqueous acid and in aqueous alkali without
evolution of a gas in either case. What could the solid be?
A
B.
с
D
copper(II) carbonate
copper(II) hydroxide
zinc carbonate
zinc hydroxide
Answer:
copper(II) carbonate
Consider this aqueous reaction.
HNO3(aq) + Ba(OH),(aq)
What is the formula for the salt that forms?
Answer:
Ba(NO3)2 barium nitrate
Explanation:
2HNO3+Ba(OH)2=Ba(NO3)2+2H2O
acid base salt water
The Urbana wastewater treatment plant discharge permit limits the discharge of ammonia/ammonium (NH3/NH4 ). To meet this permit, the ammonium is converted to nitrate (NO3 - ) by biological nitrification in trickling filter towers. The solution entering the nitrification towers contains 15 mg/L of NH4 as N. Write a balanced reaction for the oxidation of NH4 to nitrate,
Answer:
Explanation:
The conversion of ammonium ion into nitrate ion is a two step process which is written below .
2 NH₄⁺ + 3 O₂ = 2NO₂⁻ + 4 H⁺ + 2H₂O
2NO₂⁻ + O₂ = 2 NO₃⁻
This is a two step reaction . These steps are managed by different class of bacteria.
What is the mass in grams of each of the following samples? 1.505 mol of Ti 0.337 mol of Na
Answer:
72.04g Ti and 7.75g Na
Explanation:
1.505 mol Ti x (47.87g/1 mol) = 72.04g Ti
0.337 mol Na x (22.99g/1 mol) = 7.75g Na
72.04g Ti and 7.75g Na mass in grams of these samples.
What is molecular mass ?Molecular mass can be determined by the measure of mass related to a molecule which is otherwise called as atomic weight, means the mass of every atom present in the molecule.
For example, water have 2 hydrogen atoms and 1 oxygen atom, the molecular mass of water is equals to the normal atomic mass of hydrogen increased by two or more the atomic mass of oxygen.
molecular mass can be controlled by many factors like Mass Spectrometry which is used to decide the mass of little molecule which is otherwise called as monoisotopic mass.
It can also be controlled by Hydrodynamic Strategy requires calibration and determine the relative atomic weight; Static Light Scattering where the Molecular weight is determined from the measure of light dispersed utilizing the Zimm technique.
So, 1.505 mol Ti x (47.87g/1 mol) = 72.04g Ti
0.337 mol Na x (22.99g/1 mol) = 7.75g Na, hence the answer is 72.04g Ti and 7.75g Na
Learn more about mass, here:
https://brainly.com/question/18446366
#SPJ2
Name some coping skills that can be used besides
nicotine vape and or vaping marijuana.