From aliens perspective, Earth would be an exoplanet in English language.
What is exoplanet?Any planet outside of our solar system is an exoplanet. The majority of exoplanets orbit other stars, while rogue planets—free-floating exoplanets that are unattached to any star—orbit the galactic centre.
The majority of the exoplanets found so far are in the Milky Way, which is a rather tiny area of our galaxy. The Kepler Space Telescope of NASA has revealed that the galaxy has more planets than stars.
We can determine the sizes (diameters) and weights (weights) of exoplanets and determine their compositions, which range from extremely stony (like Venus and Earth) to extremely gas-rich (like Jupiter and Saturn). Exoplanets contain elements that are comparable to those found in our solar system, but their compositions of those elements may vary.
If aliens arrived on earth. Earth would be considered an exoplanet in the language of them.
Learn more about exoplanets here:
https://brainly.com/question/29837455
#SPJ2
if particle 3 is of unknown charge is to be located such that the net electrostatic charge from particles 1 and 2 is zero, what must be the x and y coordinates
For the distance between q 3 and q 1, the formula is: = 3 L 0 = 3 1 L = 3 1 10 cm 14 cm. Q3 should therefore be positioned at x=14 cm along the x-axis.
For q 3, there is no equilibrium position.
between two fixed changes because one is pulling it and the other is pushing it
L is set at 10 cm, and L 0 is taken to be positive. We cancel k and q 3 and set this equal to zero as the problem specifies. As a result, we get L 0.
∣q 1\s\s ∣\s\s − \s(L+L \s0\s\s)\s∣q \s2\s\s ∣\s\s =0 ⇒(\sL \s0
L+L \s0\s
\s ) \s2\s = \s∣\s∣\s∣\s∣\s∣\s
q \s1\s
q \s2\s
∣\s∣\s∣\s∣\s∣\s\s = \s∣\s∣\s∣\s∣\s∣
+1.0 μC\s−3.0 μC
=3.0 results in L 0 after taking the square root.
L+L \s0\s
For the distance between q 3 and q 1, the formula is: = 3 L 0 = 3 1 L = 3 1 10 cm 14 cm. Q3 should therefore be positioned at x=14 cm along the x-axis.
Learn more about distance here-
https://brainly.com/question/17317727
#SPJ4
if a 5 mhz sound wave is traveling in fat, air, muscle, and bone, which medium will have the shortest wavelength?
The medium with the shortest wavelength, if a 5 MHz sound wave is going through fat, air, muscle, and bone, is air.
The slowest sound speed is in air. The density and elasticity of the medium through which sound travels affects its speed. In general, sound travels more quickly through solids than through gases and liquids. The faster sound travels through a medium, the more elastic and less dense it is. Solid objects transmit sound the fastest. This is because sound waves can travel faster than through a solid medium through a liquid or gas because its molecules are so close together. In actuality, sound waves move over 17 times more quickly in steel than air. So as speed increases wavelength increases. Hence the speed of sound in air is lowest compare to other mediums. Therefore the air will have shortest wavelength of sound.
To learn more about sound waves click here https://brainly.com/question/11797560
#SPJ4
Calculate the work done by the electrostatic field in moving a charge of 2 coulomb from one point to another, if the potential of the first point is 20V, and the second - (5V)
Answer:
To calculate the work done by the electrostatic field in moving a charge from one point to another, you can use the formula:
work = charge * (final potential - initial potential)
In this case, the charge is 2 coulombs, the initial potential is 20V, and the final potential is -5V. Plugging these values into the formula, we get:
work = 2 coulombs * (20V - (-5V))
= 2 coulombs * (25V)
= 50 Joules
Therefore, the work done by the electrostatic field in moving the charge from one point to another is 50 Joules.
a wire carries an electric current straight upward. what is the direction of the magnetic field due to the current north of the wire
The current north of the wire fliws upwards as of the electric current straight upward.
The proper-hand thumb rule suggests the path of the magnetic area for a recognise path of the modern-day. If the thumb of the proper-hand factors alongside the path of modern-day then the curled arms of that hand offers the path of the magnetic area because of the modern-day.
The path of the magnetic area is perpendicular to the twine and is withinside the path the arms of your proper hand might curl in case you wrapped them across the twine together along with your thumb withinside the path of the modern-day.A vertical twine wearing a modern-day withinside the upward path is located in a horizontal magnetic area directed toward north.
Read more about current;
https://brainly.com/question/24858512
#SPJ4
which construct can be used in a shell script to read standard input and place it in a variable?
We use a construct that can be used in a shell script the read built-in Bash command to read user input. It assigns user input to the variable after receiving it. It simply takes one line from the Bash shell to read. The syntax for implementing it is listed below.
read <variable_name>
What is the read bash command?A built-in tool in Bash allows you to read text from standard input. The utility provides a wide range of user input reading capabilities that assist make Bash scripts interactive. Through various examples and use situations, this article demonstrates how the Bash read command functions. access to a terminal or command line.
The "read" command in Bash scripting is used to get human input. It's essential to comprehend the "read" command if you want to make your code more interactive. The "read" command is used to retrieve user-inputted data. This article demonstrates how to communicate with users using Bash's "read" command.
To learn more about Command here:
https://brainly.com/question/25808182#
#SPJ4
What is the rest mass m of a particle traveling with the speed of light in the laboratory frame. Express your answer in MeV/c? to one decimal place.
The rest mass m of a particle traveling with the speed of light in the laboratory frame is 0.
We know that, formula for mass of object can be given by:
m= [tex]\frac{m_{0} }{1-\sqrt{v^{2}/c^{2} } }[/tex]
where
m = mass of object
[tex]m_{0}[/tex] = rest mass
v = speed of the particle
c = speed of light
By Modifying this equation we get :
Given speed of particle is equal to speed of light.
i.e. v = c.
Putting this value in above equation we get [tex]m_{0}[/tex] =0.
Therefore, the rest mass of a particle traveling with the speed of light in the laboratory frame is 0.
For more such questions on speed :
brainly.com/question/14014442
#SPJ4
A ball is kicked with an initial horizontal velocity of 3.6 m/s off of a 19.6 m cliff. How
far away will the ball land from the cliff?
If a ball is thrown at an initial horizontal velocity of 3.6 meters per second off of a cliff that is 19.6 meters high, it will land 35.28 meters away from the cliff.
What is velocity?The vectoral expression of a particle and object's motion with respect towards time is called its velocity. The recognized unit for measuring magnitude of velocity is indeed the meters per second (m/s), which is frequently referred to as speed. Velocity is the rate at which an object's position is changing as perceived from a particular point of view and so as measured by a certain unit of time. It refers to the direction speed of the an object in motion.
How do you calculate velocity?Average speed is calculated by dividing a quantity by the time required to obtain that quantity. Speed in the SI is expressed in m / sec. The average speed (S) is calculated using the equation S = d/t, where d is the entire distance traveled and t denotes the total time. One can determine an object's beginning velocity by dividing the time it took the thing to go a specific distance by the total distance.
Briefing:D = (1/2) gt2 where g = 9.8 m/s2
It takes time to descend the 19.6-meter cliff.
19.6 = 1/2(9.8)t2
19.6/4.9 = t2
Square root 90.4 = about 9.8 sec.
3.6 m/s x 9.8 sec = 35.28 m
To know more about Velocity visit:
https://brainly.com/question/18084516
#SPJ1
14) (10 pts) a series lr circuit contains an emf source of having no internal resistance, a resistor, an inductor having no appreciable resistance, and a switch. i) (6 pts) if the emf across the inductor is of its maximum value after the switch is closed, what is the resistance of the resistor?
The resistance of the resistor is 1.8Ω
Consider the voltage across the inductor 4 sec after the switch is closed is V(4)
The voltage across the inductor 4 sec after the switch is closed is 80% of its maximum value, i.e., V(4)=0.8[tex]V_{0}[/tex]
Consider the expression for the voltage across the RL circuit.
V(t)=[tex]V_{0}e-\frac{t}{T}[/tex]
Where [tex]V_{0}[/tex] is the maximum voltage, t is the time, V(t) is the voltage at time
t and T is the time constant.
Substitute the values of ,[tex]V_{0}[/tex], V(t) and t in the above expression.
[tex]$$\begin{aligned}0.8 \mathrm{~V}_0 & =\mathrm{V}_0 \times \mathrm{e}^{-\frac{4}{\tau}} \\0.8 & =\mathrm{e}^{-\frac{4}{\tau}} \\\frac{1}{0.8} & =\mathrm{e}^{\frac{4}{\tau}}\end{aligned}$$[/tex]
Take natural log on both the sides.
[tex]$$\ln \left(\frac{1}{0.8}\right)=\frac{4}{\tau}$$[/tex]
Rearrange the above expression.
[tex]$$\begin{aligned}\tau & =\frac{4}{\ln \left(\frac{1}{0.8}\right)} \\& =17.9 \mathrm{~s}\end{aligned}$$[/tex]
Now consider the expression for time constant.
[tex]$$\tau=\frac{\mathrm{L}}{\mathrm{R}}$$[/tex]
Where R is the inductance and L is the resistance.
Rearrange the above expression.
R = [tex]\frac{L}{T}[/tex]
Substitute the values of T and L in the above expression.
[tex]R=\frac{34}{17.9}\\ R=1.8[/tex]Ω.
Therefore, the resistance of resistor is 1.8Ω
For such more questions about Resistor
https://brainly.com/question/17562635
#SPJ4
uppose that a flat loop of wire with an area of 0.050 m2 lies in a magnetic field normal to the loop. if the magnetic field changes at a uniform rate from 0.30 t to 1.5 t it induces an emf of 1.2 volts in the loop. find the time interval for the change. group of answer choices 0.023 sec 0.050 sec 0.073 sec 0.085 sec
When we calculate a function's average rate of change over a certain interval, we are computing the average number of units that the function moves up or down per unit along the xx-axis.
Given the function and interval of interest (f(x)f(x) and [x ₁,x₂]), [x\s₁,x₂ ]), our first step is to compute the value of our function at both ends of the interval. Then we plug those numbers and the interval's ends into our algorithm to calculate the average rate of change.
The average rate of change formula is
{x₂-x₁}
x f = x₂ x 1 f(x₂ )
within the interval [x₁,x ₂][x ₁,x ₂ ].
Learn more about rate here-
https://brainly.com/question/6835896
#SPJ4
The gravitational force of a lunar rover is 1,607.2 Newtons on Earth. What will the rover’s gravitational force be on the Moon?
On Earth, g = 9.8m/s2.
On the Moon, g = 1.62 m/s2.
Answer: Fg = 265.68 N
Explanation:
Fg = m * g
m = Fg / g
m = 1607.2 N / 9.8 m/s^2
m = 164 kg
Fg = m * g
Fg = 164 kg * 1.62 m/s^2
Fg = 265.68 N
Prove the property a × b = − b × a of this theorem. Let a = a1, a2, a3 and b = b1, b2, b3 . Then a × b = __ = (−1) __ =− b × a.
If a = a1, a2, a3 and b = b1, b2, b3 . Then [tex]& \vec{a} \times \vec{b}=(-1)(\vec{b} \times \vec{a})[/tex] Or [tex]& \vec{a} \times \vec{b}=-\vec{b} \times \vec{a}[/tex]
As per the details share in the above question are as bellow,
The provided data are follow,
The product of two or more integers that remain the same, regardless of the sequence in which they are multiplied, is referred to as the commutative property formula for multiplication. The commutative property formula for multiplication is (A x B) = (B x A).
Let us consider, Let a = a1, a2, a3
And b=b1, b2, b3
We have the property that a × b = − b × a.
Then a × b = __ = (−1) __ =− b × a.
[tex]& \vec{a}=a_1 i+a_2 j+a_3 k \\ \vec{b}=b_1 i+b_2 j+b_3 k[/tex]
Then,
[tex]$$\vec{a} \vec{x} \vec{b}=\left|\begin{array}{ccc}i & j & k \\a_1 & a_2 & a_3 \\b_1 & b_2 & b_3\end{array}\right|$$[/tex]
[tex]$$=i\left(a_2 b_3-a_3 b_2\right)+j\left(a_3 b_1-a_1 b_3\right)+k\left(a_1 b_2-a_2 b_1\right)$$[/tex]
So further we get,
[tex]& =i\left(b_2 a_3-a_2 b_3\right)+j\left(a_1 b_3-a_3 b_1\right)+k\left(a_2 b_1-a_1 b_2\right) \\& =-\left[i\left(a_2 b_3-a_3 b_2\right)+j\left(a_3 b_1-a_1 b_3\right)+k\left(a_1 b_2-a_2 b_1\right)\right.[/tex]
So, we get,
[tex]\vec{a} \times \vec{b}=\left[i\left(a_2 b_3-a_3 b_2\right)+j\left(a_3 b_1-a_1 b_3\right)+k\left(a_1 b_2-a_2 b_1\right)\right.[/tex]
We get,
[tex]& \vec{b} \times \vec{a}=-[\vec{a} \times \vec{b}][/tex]
Or [tex]& -\vec{b} \times \vec{a}=\vec{a} \times \vec{b}[/tex]
Then,
[tex]& \vec{a} \times \vec{b}=(-1)(\vec{b} \times \vec{a})[/tex]
Or [tex]& \vec{a} \times \vec{b}=-\vec{b} \times \vec{a}[/tex]
for more such question on property.
https://brainly.com/question/25844719
#SPJ4
Consider how Nyad physically and mentally trained for her endeavor. Which of these training and conditioning exercises—those designed to increase her physical endurance or those intended to get her through mentally—do you believe helped her the most and why?
Physical and mental training helps to increase endurance.
What are the benefits of physical and mental training?It should come as no surprise that helping your body will also benefit your mind. Your brain receives more oxygen when you exercise. Additionally, it raises your brain's levels of endorphins, or "feel-good" chemicals. This is why it makes sense that those who maintain a healthy physical state also frequently exhibit higher levels of mental agility.
Exercise your mind just as much as your body. A study published in the Proceedings of the National Academy of Sciences claims that specific memory workouts can improve "fluid intelligence," or the capacity to reason and solve novel challenges.
Learn more about mental training here:
https://brainly.com/question/29489328
#SPJ1
what do the sublevel designations s, p, d, and f specify with respect to the atom's orbitals?
In particles, electrons circle in shells comparing to principle quantum number n. In expanding request of n, the shells are named K, L, M, N, O, P, ...
For a shell of guideline quantum number n, there are subshells comparing to orbital quantum numbers (lowercase L) l = 0, 1, 2, ... , n - 1. Their names are s,p,d,f,... in expanding request of l.
Besides, for every l, there are 2l+ 1 potential attractive quantum numbers ml = 0, ±1, ±2, ... , ±l.
Each state (n,l,[tex]m_l[/tex]) can be involved by up to 2 electrons greatest, which should have opposite spins (Pauli Exclusion Principle).
Likewise, there is a documentation called spectral notation for electron configuration. I'm certain you have seen it.
It is a succession of one metal more orbitals with their electron includes in the structure
[shell number][subshell name][tex]^[number of electrons][/tex]
Model, [tex]1s^22s^22p^6[/tex] for Neon implies 2 electrons in subshell s of the n=1 shell, 2 electrons in subshell s of the n=2 shell, and 6 electrons in subshell p of the n=2 shell. The just subshell for n=1 and both subshells for n=2 are completely filled and no electrons possess n>2 here, accordingly making Neon inert (Noble gas).
To know more about electron configuration click on below link:
https://brainly.com/question/29757010#
#SPJ4
express the internal shear in terms of x for 0≤x≤6ft, where x is in ft.
The internal shear in terms of x for [tex]$0 \leq x \leq 6 \mathrm{ft}$[/tex], where x is in ft. will be[tex]V_x & =A_y-400 \times x =1900-400 x[/tex]
A free-body diagram is a graphical representation used in physics and engineering to show the applied forces, moments, and consequent reactions on a body in a specific situation. It shows a body or group of connected bodies together with all the applied forces, times, and responses that the bodies experience.
Potential energy and equilibrium are related in that the body's potential energy is lower in such an equilibrium.
In this case, the state generates a force that does not resist the displacement when a little distance displaces the body.
Draw the free-body diagram as shown below.
Consider the moment equilibrium condition about B.
[tex]$$\begin{aligned}& M_B=0 \\& A_y \times 9-400 \times 6 \times\left(\frac{6}{2}+3\right)-900 \times 3=0 \\& A_y=1900 \mathrm{lb}\end{aligned}$$[/tex]
Write the internal shear force equation for [tex]$0 \leq x \leq 6 \mathrm{ft}$[/tex].
[tex]V_x & =A_y-400 \times x =1900-400 x[/tex]
For more questions on Internal shear
https://brainly.com/question/27131239
#SPJ4
The complete question should be:
Express the internal shear in terms of x for [tex]$0 \leq x \leq 6 \mathrm{ft}$[/tex], where x is in ft.
Express your answer in terms of x. Express your answer using three significant figures.
a sinusoidal transverse wave is traveling on a string. any point on the string: a) moves in the same direction as the wave b) moves in simple harmonic motion with a different frequency than that of the wave c) moves in simple harmonic motion with the same angular frequency as the wave d) moves in uniform circular motion with a different angular speed than the wave e) moves in uniform circular motion with the same angular speed as the wave
There is a transverse sinusoidal wave on a string that flows in a straightforward harmonic fashion and has an angular frequency that matches the wave. (Chose c.)
How physically act waves?An energetic disturbance called a wave moves from one place to another. Every time a wave moves, energy is changed, regardless of the change. The substance through which a wave passes is known as the medium. Back and forth oscillations occur repeatedly in that medium.
How could waves be described?A wave is a disruption or variation that progressively moves energy from one location in a medium to another. It could manifest as an elastomeric deformation or a shift in pressure, magnetic or electric field strength, electric potential, or temperature.
To know more about Waves visit:
brainly.com/question/19477984
#SPJ4
find the work done by a force of 12 newtons at 25 degrees pulling an object 10 meters up a ramp inclined at 4 degrees
The work done by a force is 40.14 J
The work done is calculated to include both the force applied to the body and the overall movement of the body. There is a constant force F in front of this block. The purpose of this force is to move an object a certain distance d in a straight line in the direction of the force.
The cart is lifted to a height, h:
h = (10meters) ×sin(4) = 0.69 m
The force in the vertical direction is:
Fy = 12N×sin(29o) = 58.177N
Work = F×d = (58.177)×(0.69) = 40.14 joules
Learn more about work here:
https://brainly.com/question/25573309
#SPJ4
Joe pushes down the length of the handle of a 12.9 kg lawn spreader. The handle makes an angle of 41.7◦ with the horizontal. Joe wishes to accelerate the spreader from rest to 1.39 m/s in 1.7 s. What force must Joe apply to the handle? Answer in units of N.
Answer:
Below
Explanation:
Only the HORIZONTAL force , F cos 41.7 moves the spreader forward
The acceleration = change in V / change in t = 1.39/1.7 = .818 m/s^2
F = m * a
F cos 41.7 = 12.9 * .818 shows F = 14.12 N
a loaded grocery cart is rolling across a parking lot in a strong wind. you apply a constant force f
The digits on the left side of the number 3 remain the same when it is less than 5, however the digits on the right side of the number 3 and 3 are replaced by zero. done work=-180 J
We are informed that
Constant force = F = (33 N)i - (41 N) j
Displacement=s=(-9.4m)i-(3.1m)j
We must locate the completed work.
Done work = F.s.
Using the equation
Working = (33i-41j).
(-9.4i-3.1j)
Work completed: 33. (-9.4)
i+41j.3.1j
Making use of the rules i.i=j.j=k.k=1, i.j=j.k=k.i=i.k=k.j=j.i=0, and
Finished work: -310.1+127.1
Finished work: 183.1 J
Answers must be written with two significant figures.
The digits on the left side of 3 remain the same when the unit's digit 3 is less than 5, however the digits on the right side of 3 and 3 will be replaced by 0.
done work=-180 J
To know more about Work done visit:
https://brainly.com/question/13662169
#SPJ4
a grandfather clock is running slow. the period of its pendulum is too long. to shorten the period and make the clock run faster, you should.
Running slowly is a grandfather clock. Its pendulum has an excessively lengthy period. You can speed up the clock by cutting the period in half. To do this, reduce the pendulum's length.
In order to allow it to freely swing, a weight is suspended from a pivot like a pendulum. The restoring force from gravity will cause a pendulum to accelerate back toward its equilibrium position when it is sideways moved from its resting, equilibrium position. The pendulum swings back and forth about the equilibrium position after being freed due to the restoring force acting on its mass. The period is the length of time required for one full cycle, which includes both a left and right swing. The length of the pendulum and, to a lesser extent, its amplitude, or swing breadth, both affect the period.
Learn more about pendulum here:
https://brainly.com/question/29702798
#SPJ4
which of the following cannot travel in a vacuum? a. a yellow light wave b. a sound wave c. a radio wave d. all can travel in a vacuum. e. none can travel in a vacuum.
Which of the following cannot travel in a vacuum- none can travel in a vacuum.
To travel from one place to another by car, train, plane or ship; Travel: Travel for pleasure. To move or move from one place or point to another. Continue or proceed in any way. As a representative of a commercial company, I travel from place to place. Communicate or Spouse: He travels in wealthy crowds.
Travel refers to activities that involve long journeys. Tourism also means travel, but tourism has a specific purpose. It means a trip to a pleasant place. We travel with our hearts and eyes open to learning more about the world than a newspaper can contain. We travel by ignorance and knowledge to bring the least we can to regions where the distribution of wealth is different.
Learn more about Travel here:
https://brainly.com/question/28779362
#SPJ4
. a single strand of wire of adjustable length is wound around the circumference of a round balloon that has a diameter of 21.0 cm. a uniform magnetic field with a magnitude of 2.00 t is perpendicular to the plane of the loop. if the balloon is blown up such that its diameter and the diameter of the wire loop increase to 31.0 cm in 0.036s, what is the magnitude of the average value of the emf induced in the loop?
The magnitude of the average value of the emf induced in the loop is 2.26 V.
The initial area of wire loop is:
A(initial) = π d² / 4
= 3.14 × ( 0.21 m )² / 4
= 0.0346 m²
And, The wire loop's final location is at:
A(final) = π d² / 4
= 3.14 × ( 0.31 m )² / 4
= 0.0754 m²
It is given that the magnetic field is normal to the loop of wire.
Therefore, angle made by the magnetic field with the normal to the loop
is :
θ = 0°
Applying Faraday's law, the average emf induced in the loop is:
ε = B × ( A(final) - A(initial) ) × cosθ / Δt
ε = 2.00 T × ( 0.0754 - 0.0346 ) m² × cos0° / 0.036 s
ε = 2.26 V
To learn more about Electric and magnetic fields, Here :
https://brainly.com/question/21683153?referrer=searchResults
#SPJ4
a solenoid of length 2.50 cm and radius 0.550 cm has 45 turns. if the wire of the solenoid has 1.15 amps of current, what is the magnitude of the magn
According to the given statement 11.38 T is the magnitude of the magnetic field inside the solenoid.
What is vector and magnitude?By using the symbol |v|, the strength of a vector theorem can be utilized to determine the length for such a given vector (let's say v). This amount is essentially the distance between the vector's beginning point and ending point. The range calculation, which we will go over in this section, is used to determine the vector's magnitude.
Briefing:Length of solenoid, L = 2.5 cm = 0.025 m
Radius of solenoid, r = 0.55 cm = 0.0055 m
Number of turns, N = 45 turns
Current, I = 1.15 A
Magnetic field, B, is given as:
B = (N*r*I) /L
B = (45 * 0.0055 * 1.15)/0.025
B = 11.38 T
To know more about Magnitude visit:
https://brainly.com/question/1313542
#SPJ4
The complete question is-
A solenoid of length 2.50 cm and radius 0.550 cm has 45 turns. If the wire of the solenoid has 1.15 amps of current, what is the magnitude of the magnetic field inside the solenoid?
2. a student places an object with a mass of m on a disk at a position 0.2m from the center of the disk. the student starts rotating the disk. when the disk reaches a speed of 0.8 m/s, the object starts to slide off the disk. what is the coefficient of static friction between the object and the disk? (4 pts)
The coefficient of static friction when the speed of the disk is given, is calculated to be 0.065 / r.
The maximum velocity of an object moving in a curve beyond which it will slide off the curve is given by the relationship,
v = √(μ* g* r) ----(1)
where is the coefficient of friction between the object and the surface of the curve, g is acceleration due to gravity and r is the radius of the curve.
Given that,
v = 0.8 m/s
g = 9.8 m/s²
r = ?
μ = ?
Making μ as subject, we have,
μ = v²/(g*r) ----(2)
As we were not given the value of r, we can just substitute other known values, then solve and leave the answer in terms of r.
μ = (0.8)²/(9.81* r) = 0.64/ (9.81* r) = 0.065 / r
To know more about friction:
https://brainly.com/question/14972436
#SPJ4
On a route to senior prom, a couple was cut off by another car. The couple traveling 21 m/s slammed on the brakes and slowed to a speed of 8 m/s in a time of 1.4 seconds. How far did they travel while breaking?
1) 18 m
2) 20 m
3) 29 m
4) 41 m
5) answer not shown
They travelled 20 meter while breaking. Hence, option (2) is correct.
What is speed?Speed is distance travelled by the object per unit time. Due to having no direction and only having magnitude, speed is a scalar quantity With SI unit meter/second.
Initial speed of the car is: u = 21 m/s.
Final speed of the car: v = 8 m/s.
Time interval: t = 1.4 second.
Deceleration of the car: a = (u-v)/t = (21 - 8)/1.4 m/s^2 = 9.29 m/s^2.
Hence, the car traveled during deceleration:
s = ut - at^2/2
= (21×1.4) - 9.29×(1.4)^2/2 meter
= 20 meter.
Hence, option (2) is correct.
Learn more about speed here:
https://brainly.com/question/28224010
#SPJ1
8) why can we not determine distances to galaxies by the same method used to measure the parallaxes of stars?
They are so distant that the parallax is too small to be measured since parallax varies inversely with distance.
Parallaxes can be measured accurately out to distances of approximately 100 light-years. The nearest galaxies are about 50,000 to 80,000 light-years from the Sun. Therefore, there is no perceptible change in the apparent position of any galaxy as we view it from opposite sides of Earth's orbit.
Because of the influences of the Earth's atmosphere, it is highly challenging to estimate parallax angles of less than 0.01 arcsec from Earth. Due to this, telescopes on Earth can only measure the distances to stars that are 1/0.01 or 100 parsecs distant.
To learn more about parallax visit:https://brainly.com/question/3527534
#SPJ4
what principle is described by the distribution of objects in a visual field that connects the different parts of a whole work? space balance movement symmetry
In interior design, balance refers to the appropriate placement of elements in a space to produce aesthetic harmony.
Balance refers to how objects, colors, textures, and space are distributed visually. These components should be balanced to create a design that feels stable, as if the design were a scale. Balance refers to the idea of visual equilibrium and has to do with our feeling of balance on a physical level. Visual stability is the consequence of balancing conflicting forces in a composition. The majority of well-balanced compositions do so either symmetrically or asymmetrically. Equal weights on equal sides of a composition, balanced around an axis or fulcrum in the middle, are indicative of symmetrical equilibrium. Symmetrical balance inspires feelings of formality and elegance (it's also known as formal balance).
Learn more about stability here-
https://brainly.com/question/13751780
#SPJ4
Which of the following is a true statement?
you're in a boat with a big rock, in a swimming pool. you toss the rock overboard. what happens to the level of the water in the pool?
You're in a boat with a big rock, in a swimming pool. You toss the rock overboard. Level of water will increase as of the mass of big rock to the level of the water in the pool.
The buoyancy of any floating object partially or totally submerged in a fluid can be computed thanks to Archimedes' principle. The weight of the thing alone exerts a downward mass on it. The upward or buoyant force acting on the object is what is meant by the aforementioned Archimedes' principle. The difference between the buoyant force and the object's weight is therefore the net force acting on it. In the event that this net force is positive, the item will rise; in the event that it is negative, the object will sink; and in the event that it is zero, the object will be neutrally buoyant, remaining stationary. Simply said, when a body is partially or entirely submerged in a fluid, the Archimedes' principle applies. Consider a cuboid submerged in a fluid, with its top and bottom facing in the direction of gravity, which is considered to be constant throughout the length of the cube. Each face of the fluid will experience a normal force, but only the normal forces on the top and bottom will result in buoyancy. The height directly affects the pressure difference between the top and bottom faces (difference in depth of submersion). A net force on the cuboid is created by multiplying the pressure difference by the area of a face.
To know more about mass please refer: https://brainly.com/question/15573585
#SPJ4
a convex lens has a focal length fff . an object is placed at a distance between fff and 2 fff on a line perpendicular to the center of the lens. the image formed is located at what distance from the lens?
The image will be formed beyond 2f if the object has been kept between f and 2f in a convex lens.
Any converging lens is referred to as a convex lens.
A lens that converges light rays that are moving parallel to its main axis is known as a converging lens or convex lens.
The distance between a lens's center and its focus is known as the focal length, or f, of a lens.
When an item is positioned along a line perpendicular to the center of the lens, between infinity and twice the object's distance from the focal point,
The image will be situated between the focal point, f, and twice the focal point's distance, 2f.
Consequently, for an object positioned along a line perpendicular to the center of the lens between infinity and 2f.
The image created by a convex lens when an item is positioned between F and 2F is magnified, real, inverted, and beyond 2F.
To read more about the convex lens, visit https://brainly.com/question/1604692
#SPJ4
Jimi is pushing a large cart at work toward the left side of the store using 10N of force. His friend Jonah comes up and pushed the cart with 8 N of force toward the right side of the store. What is the net force and direction of the cart
The net force acting on the cart is 2 N in left direction.
What is force?The definition of force in physics is: The push or pull on a massed object changes its velocity.
An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude. Newton is the SI unit of force.
Jimi is pushing a large cart at work toward the left side of the store using 10N of force.
Jonah pushed the cart with 8 N of force toward the right side of the store.
Hence, the net force acting on the cart in left direction = ( 10 N - 8 N) = 2 N.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ1