Hello, 3Coli Here!
Your Answer is Here:
I would recheck, redo, and revise my answers, if necessary. Also, I can look at the lesson again, if I forgot something. So that's what I would do.
Hopefully, this helps!
Ask your question below!
Answer:
I will just revise and check my answer, or I can redo the lesson.
Explanation:
Have a good day! :D
A 2.5 L container holds a sample of hydrogen gas at 291 K and 180 kPa.
If the pressure increases to 350 kPa and the volume remains constant, what will the new temperature be?
Round your answer to one decimal place.
Answer:
The new temperature will be 565.83 K.
Explanation:
Gay Lussac's law establishes the relationship between the temperature and the pressure of a gas when the volume is constant. This law says that the pressure of the gas is directly proportional to its temperature. This means that if the temperature increases, the pressure will increase; or if the temperature decreases, the pressure will decrease.
In other words, Gay-Lussac's law states that when a gas undergoes a constant volume transformation, the ratio of the pressure exerted by the gas temperature remains constant:
[tex]\frac{P}{T} =k[/tex]
When an ideal gas goes from a state 1 to a state 2, it is true:
[tex]\frac{P1}{T1} =\frac{P2}{T2}[/tex]
In this case:
P1= 180 kPaT1= 291 KP2= 350 kPaT2= ?Replacing:
[tex]\frac{180 kPa}{291 K} =\frac{350 kPa}{T2}[/tex]
Solving:
[tex]T2=350 kPa*\frac{291 K}{180 kPa}[/tex]
T2= 565.83 K
The new temperature will be 565.83 K.
Is a cell wall found in a plant cell?
Answer:
A plant cell has a cell wall but an animal cell dosnt have one
Explanation:
Brainliest plz
Explanation:
the cell wall surrounds the plasma membrane of the plant and provides tensile strength and protection against mechanical
6.900x10^10 ÷ 4.000x10^8
Answer:
1.725e+18
Explanation:
Two bungee jumpers with the same mass stand on two buildings. One stands on a building 100ft tall and the other a building that is 200ft tall. Which has more potential energy and why?
Bungee jumpers that stand on a 200 ft building
Further explanationGiven
A building 100 ft tall
A building 200ft tall
Required
Which has the greatest potential energy
Solution
Potential energy is owned by an object because of its height
Can be formulated :
PE = m . g . h
g = acceleration due to gravity ,(m/s²)
h = height , (m)
m = mass, (kg)
So PE is influenced by 3 factors:
the object's mass, its gravitational acceleration at that place and its height
Because the mass and gravitational acceleration are the same, the largest PE is owned by bungee jumpers that stand on a 200 ft building
How many atoms are in 4.1 grams of zinc?
Answer:
1 mole of zinc has 6.023 x 1023 atoms
So, 4.1 moles will have 4.1 x 6.023 x 1023 atoms = 24.694 x 1023 atoms
Explanation:
Write your explanation on how plants
nake their own food?
imnortont bynroduct of
Answer:
photosynthesis are ligt water and carbon dioxide
Explanation:
Plants make their own food out of inorganic compounds through a process called photosynthesis that takes place in the leaves. The ingredients necessary for photosynthesis are light, water and carbon dioxide.
help me please asap ...........................................
How can you figure out how much energy your body gets from the food you eat and drink in a day?
Answer: So to figure out your energy balance you need to gather some important information. That is, you eat more calories than your body uses. A kilojoule is a calorie) is a measure of energy in food. On average, people eat and drink around 8700 kilojoules a day.
Explanation: I hope that helped- Please mark me as brainliest!
At the end of which era did the dinosaurs became extinct?
Cenozoic
Jurassic
Mesozoic
Paleozoic
Answer:
Cretaceous Period
Explanation:
Dinosaurs went extinct about 65 million years ago (at the end of the Cretaceous Period), after living on Earth for about 165 million years.
The best way to separate sesame seeds from salt solution is _____
1 :Filtration
2:Osmosis
3 :Distillation
4 : evaporation
Answer:
Filtration is the answer
PLEASE ANSWER 80 POINTS
Which response includes all of the following Z1) LiO2 + CO2 → Li2CO3 Z2) Cl2 + 2 NaBr → Br2 + 2 NaCl Z3) HNO3 + KOH → KNO3 + H2O Z4) SO3 + H2O → H2SO4 that are combination reactions, and none that are not combination reactions? 1. Z1 and Z4 only 2. Another reaction or another combination 3. Z1, Z3 and Z4 only 4. Z1 and Z2 only 5. Z1, Z2 and Z4 only
Answer:
z3 xCo2 + 75 = s01 + h20 = Z2
Explanation:
The study of chemicals is called chemistry.
The correct answer is A.
A combination reaction is defined as the joining of two different elements to form a new compound is called a combination reaction. A new compound is always formed in the reaction.
According to the question, in option A the [tex]Li_2Co_3[/tex] is formed and in reaction 4 [tex]H_2So_4[/tex] is formed.
Hence, the correct option is A that is Z1 and Z4.
For more information, refer to the link:-
https://brainly.com/question/12985618
PLZ HELP ME IM FAILING!
Everything you need to know about the question is on the photo
Answer:
C. NH₄Cl
Explanation:
The compound with the element ratio 1 : 4 : 1 from the given choices is NH₄Cl.
An element is a pure substance made up of distinct number of atoms. Elements are unique and are different from other elements because of the nature of their atoms.
We often delineate an element using chemical symbols.
In the compound NH₄Cl;
There are 3 elements:
Number of atoms
N 1
H 4
Cl 1
You put two pots of water on the stove to boil. Both pots are the same size and are on the same size burner at the same heat setting, and one pot has twice as much
water as the other. Which one will boil faster? Why do you think that is?
Answer:
The emptiest one.
Explanation:
The more water, the more heat molucules have to turn to boil.
Have a great day!
Hope I helped and it would be greatly appreciated if you could be considerate and give brainliest.
Oxygen gas is at a temperature of 145 K when it occupies a volume of
1.45 Liters. To what temperature should it be raised to occupy a volume of 6.50
Liters? Show your work. (Express your answer in Kelvin)
Answer:650K
Explanation:
Answer: 650K (1.45/145 = 6.50/x)
Explanation:
You eat a snack that has 190 Calories, how many kilojoules did you consume? PLEAS HELP ME I need the work too pls
Answer:
794.96 kilojoules
Explanation:
multiply 190 by 4.184
There are 0.798 kilojoules an individual must consume when he/she takes a snack that has 190 Calories.
What is one Calorie?
One calorie may be defined as a unit for measuring heat wjhich is equivalent to the amount of heat required to increase the temperature of one gram of water one degree Celsius.
According to the question,
The amount of calories a snack contains = 190 calories
Now, you should be required to convert calories into Joules.
1 calorie ≅ 4.2 Joules.
190 calories = 190 × 4.2 = 798 Joules.
Now, according to the conversion factor, 1 kilojoule = 1000 joules
∴ 798 Joules = 798/1000 = 0.798 kilojoules.
Therefore, there are 0.798 kilojoules an individual must consume when he/she takes a snack that has 190 Calories.
To learn more about Calories and Joules, refer to the link:
https://brainly.com/question/22066066?source=archive
#SPJ2
Mixtures can be separated by physical processes.
A sequence of physical processes can be used to separate common salt (sodium chloride)
from a mixture containing sand and common salt only.
Give the order and the correct scientific term for the physical processes used to separate the
common salt from the mixture.
don't know sorry.........
"Henry mixed salt and water together in a cup until he observed a clear solution. He measured the mass of the solution. Then he placed the cup outside for several sunny days during the summer. After a week, he observed that only solid salt remained in the cup and the mass had decreased. Henry concluded that a physical and chemical change occurred in this investigation."
Which statements correctly defend or dispute his conclusion?
A.)He is correct. Dissolving salt in water is a physical change, but evaporating the water is a chemical change. Formation of a solid is evidence that a chemical change occurred.
B.)He is correct. Evaporation is a physical change, but dissolving salt in water is a chemical change. The change in mass is evidence that a chemical change occurred.
C.)He is incorrect. Dissolving salt in water and evaporation of the water are both physical changes. The reappearance of salt is evidence that the change was reversible by a physical change, so it could not be a chemical change.
D.)He is incorrect. Dissolving salt in water and evaporation of the water are both chemical changes. The reappearance of salt is evidence that the change was reversible by a chemical change, so it could not be a physical change.
Answer:
C.)He is incorrect. Dissolving salt in water and evaporation of the water are both physical changes. The reappearance of salt is evidence that the change was reversible by a physical change, so it could not be a chemical change.
Explanation:
From the analogy of the problem presented, we can see that Henry is grossly incorrect. His conclusion from the process of the experiment he carried out is completely wrong.
Physical changes are changes that alters the physical properties of matter particularly the form and state.
Chemical changes leads to the formation of a new kind of matter.
We can see that since the salt was obtained back after evaporation, no change has occurred to it.
Therefore, evaporation in itself is a physical change process.
Answer:
c on ed
Explanation:
80g of calcium reacts with water to form 114g of calcium hydroxide and 2g of
hydrogen.
2 Ca + 2 H0+2CaOH + H,
What mass of water was used in this reaction?
Answer:
31g
Explanation:
80g(Ca)+m(H2O)=114g(CaOH)+2g(H2)
the total mass of the prodicts doesn't change throughout the process
80g+m(H20)=116g
m(H20)=31g
Which statement describes the conditions in which diamonds form?
A.they form deep underground, in certain areas that are under a great deal of pressure.
B.they form as water evaporates on the shores of very salty bodys of water.
C.They form as water evaporates on the shore of any body of water.
D.they form deep underground, in most regions of earth.
Answer:
a
Explanation:
900 mL of water is added to 100 mL of a 0.1 M solution. What is the new concentration?
0.1M
0.001M
0.0001M
0.01M
Answer:
The new concentration of the solution is;
0.01 M
Explanation:
The question relates to concentration of solution and proportion of mixtures
The given parameters are;
The volume of water added to the 0.1 M solution = 900 mL
The initial volume of the solution to which water was added = 100 mL
Therefore, the total final volume of the solution = 100 mL + 900 mL = 1000 mL = 1 L
The concentration of the solution = 0.1 M
The number of moles present in the solution, 'n', is given as follows;
n = 100 mL/(1000 mL) × 0.1 M = 0.01 moles
Given that no more concentrated solution was added, we have;
The number of moles in the 100 mL solution = The number of moles in the 1,000 mL solution
Therefore, the number of moles in the 1,000 mL (1 L) solution = 0.01 moles
Therefore;
The new concentration of the 1,000 mL (1 L) solution = 0.01 moles/(1,000 mL) = 0.01 moles/(1 L) = 0.01 M (By definition of the molarity of a solution)
The new concentration of the 1,000 mL (1 L) solution = 0.01 M.
D. 0.01 M
Given:
The volume of water added to the 0.1 M solution = 900 mL
The initial volume of the solution to which water was added = 100 mL
So,
The total final volume of the solution = 100 mL + 900 mL = 1000 mL = 1 L
The concentration of the solution = 0.1 M
Firstly we need to find the number of moles which is represented by 'n':
[tex]n = \frac{100mL}{1000mL}* 0.1 M\\\\n = 0.01 \text{moles}[/tex]
The number of moles in the 100 mL solution = The number of moles in the 1,000 mL solution
Thus,
The number of moles in the 1,000 mL (1 L) solution = 0.01 moles
For calculation of new concentration:
Using Molarity formula:
The new concentration of the 1,000 mL (1 L) solution [tex]= \frac{0.01\text{ moles}}{1000mL} = \frac{0.01\text{ moles}}{1L} = 0.01 M[/tex]
The new concentration of the 1,000 mL (1 L) solution = 0.01 M.
Thus, the correct option is D.
Learn more:
brainly.com/question/19943363
What is the volume of 4.78g of O2 gas at STP?
Answer:
Explanation:
The trick here is to realize that if you know the volume of a gas at STP, you can use the fact that
1
mole of any ideal gas occupies
22.7 L
under STP conditions to calculate how many moles of gas you have in your sample.
Under STP conditions:
1 mole of an ideal gas = 22.7 L
−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
In your case, you know that your sample of gas occupies
2.28 L
under STP conditions, which are currently defined as a pressure of
100 kPa
and a temperature of
0
∘
C
.
This means that your sample will contain
2.28
L
⋅
molar volume of a gas at STP
1 mole gas
22.7
L
=
0.10044 moles gas
Now, the molar mass of the gas is the mass of exactly
1
mole of the gas. In your case, you know that you get
3.78 g
for every
0.10044
moles, which means that you have
1
mole
⋅
3.78 g
0.10044
moles
=
37.6 g
Since this is the mass of
1
mole of gas, you can say that the molar mass of the gas is
molar mass = 37.6 g mol
−
1
−−−−−−−−−−−−−−−−−−−−−−−
5.4 g of Aluminium reacts with 300 mL of 0.2 mol/L hydrochloric acid solution. a. Write equation for the reaction taking place. b. Specify which reactant is limiting and which reactant is excess. c. Find volume of the gas collected at S.T.P d. How many grams of salt are produced at the end of the reaction? e. How many grams of the excess reactant are left ate the end of the reaction? Given: Al=27 , H=1 , Cl=35.5
HCl as a limiting reactant
volume of the gas(H₂)= 0.672 L
mass of salt : =2.67 g
mass of excess left : 4.86 g
Further explanationGiven
5.4 g Al
300 mL of 0.2 mol/L HCl
Required
limitng reactants
volume of the gas(H₂)
mass of salt
mass of excess left
Solution
Limiting reacttantReaction
2Al + 6HCl → 2AlCl₃ + 3H₂
mol Al = 5.4 g : 27 g/mol = 0.2
mol HCl = 0.3 L x 0.2 mol/L = 0.06
mol : coefficient of reactants :
Al = 0.2 : 2 = 0.1
HCl = 0.06 : 6 = 0.01
HCl as a limiting reactant(smaller ratio)
Al as an excess reactant
volume of H₂
mol H₂ = 3/6 x mol HCl = 3/6 x 0.06 = 0.03
volume (STP : 1 mol=22.4 L) :
= 0.03 x 22.4 L
= 0.672 L
mass of salt(AlCl₃)
mol AlCl₃ = 2/6 x mol HCl = 2/6 x 0.06 = 0.02
mass AlCl₃ :
= mol x MW
= 0.02 x 133.5
=2.67 g
mass of excess(Al) left
mol (reacted) : 2/6 x mol HCl = 2/6 x 0.06 = 0.02
mol (unreacted) : 0.2 - 0.02 = 0.18
mass = 0.18 x 27 g/mol = 4.86 g
Which of the following is true for an excess reactant?
A) It is the reactant whose atoms remain unbalanced in the equation.
B) It is the reactant that produces a smaller amount of a product.
C) It is the reactant that is left over after the reaction stops.
D) It is the reactant that produces one mole of a product.
Answer:
C) It is the reactant that is left over after the reaction stops.
Explanation:
The excess reactant is the reactant that is left over after the reaction stops. The extent of the reaction is not determined by this reactant.
A limiting reactant is a reactant that is in short supply within a given reaction.
Such reactants determines the extent of chemical reaction.
Limiting reactants are used up in a chemical reaction. The excess reactants remains unchanged after the reaction.Answer: C) It is the reactant that is left over after the reaction stops.
Explanation:
true or false:
1. chemical bonds have only one form.
2. All compounds are neutral.
3. covalent bonds do not exhibit any sort of preferential charge between atoms.
4. a covalent bond can only involve one shared electron.
Why is it not possible to use solid sodium hydroxide directly to make a standard NaOH
solution?
Answer:
Sodium hydroxide is deliquescent (absorbs moisture from the atmosphere) solid. It cannot be weighed accurately. Therefore, it is not possible to prepare a standard solution of sodium hydroxide of accurately known concentration by weighing NaOH.
Scientists often look at how much isotopes of ______
have decayed to help estimate the age
of a fossil or once-living material.
Answer:
If im correct it’s radioisotope
Explanation:
Scientists often look at how much of isotopes of : Carbon-14 have decayed
To determine the age of fossils archeologist make use of the carbon-14 dating ( i.e. making use of naturally occurring radioisotope ¹⁴C ) which is used to determine the age of fossils or material that were once in living on earth.
Carbon has about three (3) isotopes ( Carbon-12, Carbon-13 and Carbon-14 ) .but Carbon-14 isotope is most useful in determining the age of fossils and once-living things
Hence we can conclude that scientists often look at how much of isotopes of Carbon-14 have decayed to help estimate the age of fossils.
learn more : https://brainly.com/question/1296663
HELP PLEASE!
Which below, are the smallest basic units of matter?
molecules
ozone
atoms
vitamin E
Answer:
atoms
Explanation:
What does the pH of a solution represent?
A. The pH represents the partial pressure of hydrogen gas.
B. The pH tells how quickly a reaction reaches equilibrium.
C. The pH indicates how acidic or basic a solution is.
D. The pH is an indicator of the salt content of a solution.
Answer:
The pH indicates how acidic or basic a solution is.
Explanation:
i just took the test and got it right.
pH of a solution is the measure of how acidic or basic the solution is. It is determined based on the H+ ion concentration in the solution. Hence, option C is correct.
What is pH?pH of a solution is the measure of the H+ ion concentration in a solution. It determines the acidity or basicity of the solution. Mathematically it is the negative logarithm of H+ ions concentration.
pH = - log [H+]
A pH scale can be used to determine the acidity or basicity of a solution. If the basicity is 7, then the solution is neutral. If the pH is less than 7 then the solution is acidic and a pH above 7 is basic solution.
Red- green color in pH scale represent the acidic solution where green is neutral and cyan to dark blue color is given by bases. Using a litmus paper the acidity can be checked based on these color change.
To find more on pH, refer here:
https://brainly.com/question/491373
#SPJ5
10 points!! Please give me work with it and I will mark as brainlist.
Answer the question below. Use the rubric in the materials for help if needed.
A compound is 40.0 % C, 53.3 % 0, and 6.66 % H What is its molecular formula if its molecular mass is 60 g? Show all your work.
Answer: The molecular formula will be [tex]C_2H_4O_2[/tex]
Explanation:
If percentage are given then we are taking total mass is 100 grams.
So, the mass of each element is equal to the percentage given.
Mass of C = 40.0 g
Mass of O = 53.3 g
Mass of H = 6.66 g
Step 1 : convert given masses into moles.
Moles of C =[tex]\frac{\text{ given mass of C}}{\text{ molar mass of C}}= \frac{40.0g}{12g/mole}=3.33moles[/tex]
Moles of O =[tex]\frac{\text{ given mass of O}}{\text{ molar mass of O}}= \frac{53.3g}{16g/mole}=3.33moles[/tex]
Moles of H =[tex]\frac{\text{ given mass of H}}{\text{ molar mass of H}}= \frac{6.66g}{1g/mole}=6.66moles[/tex]
Step 2 : For the mole ratio, divide each value of moles by the smallest number of moles calculated.
For C = [tex]\frac{3.33}{3.33}=1[/tex]
For O =[tex]\frac{3.33}{3.33}=1[/tex]
For H = [tex]\frac{6.66}{3.33}=2[/tex]
The ratio of C : O : H = 1: 1: 2
Hence the empirical formula is [tex]COH_2[/tex]
The empirical weight of [tex]COH_2[/tex] = 1(12)+1(16)+2(1)= 30g.
The molecular weight = 60 g/mole
Now we have to calculate the molecular formula.
[tex]n=\frac{\text{Molecular weight }}{\text{Equivalent weight}}=\frac{60}{30}=2[/tex]
The molecular formula will be=[tex]2\times CH_2O=C_2H_4O_2[/tex]
Which among the following will make lime water look milky?Immersive Reader
(1 Point)
O₂
CaCO₃
Ca(OH)₂
Which among the following will make lime water look milky
option C) Ca(OH)₂