P=20707.7 atm
What is the molar form of the ideal gas law?The ideal gas law is a straightforward formula that describes the relationship between an ideal gas's pressure P, volume V, and temperature T. Unless there is a strong reason to treat gases differently, we normally treat gases as ideal because of how straightforward this relationship is:-
PV=nRT
where ;
P= Pressure=?
V= Volume= 10.5 L
n= no.of mol.= 82.5 mol
R=Ideal gas constant= 8.314 joule / mol kelvin
T=Temperature= 317 K
using Given value:-
P= nRT/ V
P=(82.5 x 8.314 x 317) / 10.5
P=20707.7 atm
Learn more about Ideal gas law here:-
https://brainly.com/question/15132707
#SPJ4
If metals are deposited in streambeds ________ would probably be used. spoil bank mining open-pit mining placer mining strip mining underground mining
If metals are deposited in streambeds placer mining would probably be used. spoil bank mining open-pit mining placer mining strip mining underground mining
Placer miningA group of mining techniques known as placer mining make use of water to remove valuable minerals from the surrounding dirt. The first placer deposits were literally just flecks of gold in a slurry of sediment that could be retrieved by expert miners using only a dinner plate-sized pan and river water.In comparison to lode mining ore, small placers are also more simple to mine, and the ore often requires less processing.Gold's high density leads it to descend from running water more quickly than the lighter siliceous elements with which it is found, and placer mining takes use of this fact. Although the fundamentals of placer mining have not changed since its inception, techniques have significantly advanced.Learn more about metal here:
https://brainly.com/question/4701542
#SPJ4
A heat engine has a temperature of 1800 k. some of the heat from the engine flows to the surroundings, which are at a temperature of 160 k. what is the approximate efficiency of the engine? 16% 91% 103% 109%
The efficiency of the engine is 91%.
The efficiency of the engine signifies how much heat is used and converted successfully into usable heat. It is fact that no engine can be 100% efficient because heat loss takes place in different ways during the process.
The efficiency of the engine is calculated by the formula:
Efficiency = Output heat/Input heat x 100
The temperature of heat engine is 1800 K. The temperature of the surrounding is 160 K.
Substitute the values in the above formula.
Efficiency = (1800 - 160)/1800 x 100
= 91%
Learn more about engine efficiency here:
https://brainly.com/question/2676954
#SPJ4
Answer:
91%
Explanation:
got it right on edge 23
Example A:
Julio was given the task to produce 59 grams of iron(III) oxide, . They had one tank of oxygen gas, and 54 grams of solid iron, . They knew that if he heated the iron in the presence of the oxygen gas, they could produce the iron(III) oxide. Since they had such little amount of iron, they decided to use as little of the iron as they could to produce the 59 grams of iron(III) oxide. Julio measured out 41 grams of iron and heated it with excess oxygen. Assume Julio's reaction went 100%. Julio was very happy that their reaction produced the 59 grams.
Example B:
Gretchen was given the task to produce 19 grams of aluminum fluoride, . They had a tank of fluorine gas, , and 7 grams of solid aluminum, . They knew that if they heated the aluminum in the presence of excess fluorine gas, they could produce the aluminum fluoride. Since Gretchen had such little amount of aluminum, they decided to use as little of aluminum as they could to produce the 19 grams of aluminum fluoride. Gretchen measured out 5 grams of aluminum and heated it with excess fluorine gas. Assume Gretchen's reaction went 100%. Gretchen was very happy their reaction produced the 19 grams.
Question #1: Which scientist did the experiment incorrectly? (1 pt)
Question #2: Explain what the scientist did incorrectly. Be sure to include the balanced equation for each scientist. Show the stoichiometry and explain in complete sentences why one experiment is wrong and the other is not. (4 pts)
Question #3: Explain specifically what the scientist should do to make the experiment correct (use numbers to support your answer). Also, include the stoichiometry to show how the scientist can make the experiment correct. (3 pts)
As Scientist B did the experiment incorrectly tht is Gretchen measured out 5 grams of aluminum and heated it with excess fluorine gas.
What is the stoichiometry in chemistry?Chemical Stoichiometry refers back to the quantitative look at of the reactants and merchandise concerned in a chemical reaction. The word “ stoichiometry” is derived from the Greek word “stoikhein” which means detail and “metron” which means measure.
As scientists used the insufficient amount of Al due to which weight of Al2O3 is not found ane caused the high error.It includes stoichiometry to show how the scientist can make the experiment correct by the production of 19 g of ALF3 which is 26.98 x 19 / 83.98 g of Al.so the mass is 610 g of Al that would be the correct amount.Read more about stoichiometry :
https://brainly.com/question/16060223
#SPJ1
Question 6 of 10
Which of the following molecules contains a polar covalent bond?
OA. 0₂
OB. H₂
OC. N₂
OD. CO
SUBMIT?
Explanation:
Correct option is C)
HCl is most polar due to the high electronegativity of Cl.
Answer:
the answer D
Explanation:
I hope it's helps you
A buffer solution buffer containing 0.32 M HC2H2O2 and 0.14 M KC2H2O2 has a pH of 4.41. What is the pKa of the acid
The pKa of the acid is 4.05
Calculation of pKa:
pKa tells about the strength of acidic molecule.
[tex]pK_{a}= -log[K_a][/tex]
Where Ka is the dissociation constant of an acid.
According to Henderson-Hasselbalch equation:
[tex]pH= pK_{a} + log\frac{[salt]}{[acid]} \\[/tex]
pH= 4.41
Concentration of acid= 0.32M
Concentration of salt= 0.14M
Putting the values in the equation,
[tex]4.41= pK_{a} + log\frac{0.32}{0.14}\\\\4.41= pK_{a} + 0.36\\\\pK_{a}= 4.41 - 0.36\\pK_{a}= 4.05[/tex]
The pKa of the acid is 4.05.
Learn more about Henderson-Hasselbalch equation:
https://brainly.com/question/13851185
#SPJ4
Diethyl ether (C4H10O), the "ether" used medically as an anesthetic, is prepared commercially by treatment of ethyl alcohol (C2H6O) with an acid.
Part A
How many grams of diethyl ether would you obtain from 41.8 g of ethyl alcohol if the percent yield of the reaction is 76.6 % ?
25.54 g of diethyl ether would you obtain from 41.8 g of ethyl alcohol if the per cent yield of the reaction is 76.6 %.
What are moles?A mole is defined as 6.02214076 × [tex]10^{23}[/tex]of some chemical unit, be it atoms, molecules, ions, or others. The mole is a convenient unit to use because of the great number of atoms, molecules, or others in any substance.
Step 1: Write the balanced equation
2 CH₃CH₂OH ⇒ CH₃CH₂OCH₂CH₃ + H₂O
Step 2: Calculate the moles corresponding to 41.8 g of CH₃CH₂OH
The molar mass of CH₃CH₂OH is 46.07 g/mol.
41.8 g × 1 mol ÷ 46.07 g = 0.90.
Step 3: Calculate the theoretical moles of CH₃CH₂OCH₂CH₃ produced
The molar ratio of CH₃CH₂OH to CH₃CH₂OCH₂CH₃ is 2:1. The moles of CH₃CH₂OCH₂CH₃ theoretically produced are 1/2 × 0.90 mol = 0.45
Step 4: Calculate the real moles of CH₃CH₂OCH₂CH₃ produced
The percent yield of the reaction is 85%.
0.45 mol × 76.6% = 0.3447 mol
Step 5: Calculate the mass corresponding to 0.3447 moles of CH₃CH₂OCH₂CH₃
The molar mass of CH₃CH₂OCH₂CH₃ is 74.12 g/mol.
34.47 mol × 74.12 g/mol = 25.549164 g
Hence, 25.54 g of diethyl ether would you obtain from 41.8 g of ethyl alcohol if the per cent yield of the reaction is 76.6 %.
Learn more about moles here:
https://brainly.com/question/8455949
#SPJ1
A sample of ideal gas at room temperature occupies a volume of 27.0 L at a pressure of 242 torr . If the pressure changes to 1210 torr , with no change in the temperature or moles of gas, what is the new volume, V2 ? Express your answer with the appropriate units.
The New Volume is 5.4L
Boyle's law, also known as the Boyle-Mariotte law or Mariotte's law (particularly in France), is an experimental gas law that explains how a gas's pressure tends to drop as the capacity of the container increases.
A current formulation of Boyle's law is:
If the temperature and amount of gas remain constant in a closed system, the absolute pressure exerted by a given mass of an ideal gas is inversely proportional to the volume it occupies.
Boyle's law can be expressed mathematically as either PV = k or P 1/V (Pressure is inversely proportional to volume) (Pressure multiplied by volume equals some constant k)
P1V1 = P2V2
P1 = 242
V1 = 27
P2 = 1210
V2 = (242*27)/1210
V2 = 5.4L
Hence the New Volume V2 is 4.5L
Learn more about Boyle's law here
https://brainly.com/question/469270
#SPJ4
Calculate the values of ΔU, ΔH, and ΔS for the following process:
1 mole of liquid water at 25 C and 1 atm ➡️ 1 mole of steam at 100 C and 1 atm
The molar heat of vaporization of water at 373 K is 40.79 kJ mol-1, and molar heat capacity of water is 75.3 J K-1 mol-1. Assume molar heat capacity to be temperature independent and ideal-gas behavior.
The values of the changes are
ΔH = 46.44kJ
Δu = 43.34Kj
ΔS = 126.6 J/K
How to find change in H= 1 mol + 75.3 (100 + 273) - 25 + 273 + 1 * 40.79
= 5.6475 + 40.79
= 46.44kJ
How to find change in S
1 mol + 75.3 x ln 373/298 + 1 mol x 40.79
= 0.1263
ΔS = 126.6 J/K
How to find the change in U46.44 - 0.00831 * 373
= 43.34Kj
Read more on molar heat here:
https://brainly.com/question/13439286
#SPJ1
Which of the following are examples of elements?
a. CO
b. Li
c. KBr
d. Ca
[tex]\huge\boxed{\textsf{Li and Ca}}[/tex]
An element is a substance that can't be broken down further. Lithium (Li) and calcium (Ca) are examples of elements.
Carbon monoxide (CO) and potassium bromide (KBr) are examples of compounds, which are made up of more than one element put together.
please help im literally suffering
3. If the initial pressure of gas inside the balloon was 1.65 atm, what is the new pressure?
4. A weather balloon has a volume of 200.0 L at a pressure of 760 mm Hg. As it rises, the pressure decreases to 282 mm Hg.
a. Will the volume of the balloon increase or decrease? Why?
b. What is the new volume of the balloon? (Assume constant temperature).
5. A sample of gas kept at a constant pressure, is heated from 273 K to 373 K. If the initial volume is 3.00 L, what is the new volume?
6. A container of gas is heated from 250 K to 303 K. What is the new pressure if the initial pressure is 880 kPa? (Assume constant volume)
A 0.100 mole sample of gas is at a temperature of 85.0°C and a volume of 3.47 L. What is the pressure of the gas (in mm Hg)
The answers are as follows;
3 - 4.95 atm
4 - 539 L
5 - 4 L
What are the gas laws?The gas laws are used to establish the relationship between the pressure, volume, number of moles etc of a gas.
3.
V1 = 1.50 L
V2 = 0.50 L
P1 = 1.65 atm
P2 = ?
P1V1 = P2V2
P2 = P1V1 /V2
P2 = (1.50)(1.65) / (0.50)
P2 = 4.95 atm
4.
P1V1 = P2V2
P1 = 760 mm Hg
V1 = 200.0 L
P2 = 282 mm Hg
V2 = ?
V2 = P1V1/P2
V2 = 760 mm Hg * 200.0 L/282 mm Hg
V2 = 539 L
The volume of the gas increases because the pressure decreases.
5.
Using
V1/T1 = V2/T2
V1T2 =V2T1
V2 = V1T2/T1
V2 = 3.00 L * 373 K/ 273 K
V2 = 4 L
Learn more about gas laws:https://brainly.com/question/22027561
#SPJ1
Please help fast
Matter can undergo chemical reactions and nuclear reactions. Which feature of the components stays the same in chemical reactions but not nuclear reactions?
A. Types of compounds
B. Chemical bonds between atoms
C. Types of atoms
D. Number of compounds
The types of atoms stay the same in chemical reactions but not in nuclear reactions. The correct option is C.
Chemical reactions vs nuclear reactionsIn chemical reactions, atoms remain the same at the end of every reaction. Although the bonds between atoms may change.
In nuclear reactions, atoms fuse with other atoms to form new atoms entirely. This is otherwise known as nuclear fusion.
Another type of nuclear reaction is nuclear fission. A single atom decomposes to form 2 or more different atoms entirely.
More on reactions can be found here: https://brainly.com/question/17434463
#SPJ1
Answer:
C) types of atoms
Explanation:
i just took the test
what is the reaction for C + H₂ → CH4
Answer:
synthesis/combination
Explanation:
There are 5 main types of reactions.
combination/synthesis, decomposition, single-replacement, double-replacement, and combustion
synthesis/combination - A+B → AB
Decomposition - AB → A+B
single- replacement - A + BC → AC + B
double replacement - AB + CD → AD + CB
combustion - example - C3H8(g) + 5O2(g) → 3CO2(g) + 4H2O(g)
If you wanted to balance this
the answer would be [tex]C + 2H_{2}[/tex] → [tex]CH_{4}[/tex]
In what way would a digital thermometer be preferable to those from a liquid-based thermometer? digital thermometer readings are easier to use when performing calculations. digital thermometer readings can be more readily combined with computer software. digital thermometer are inexpensive. digital thermometer are less prone to fluctuation.
Advantages of Digital thermometer:
Digital thermometer readings can be more readily combined with computer software.
Digital thermometer:
Compared to current clinical thermometers, it represents a step forward. There are now digital thermometers available that can measure temperature accurately without using mercury due to mercury's high toxicity and difficulties in disposing of it when a thermometer breaks.
Digital thermometers measure body temperature using heat sensors. They can be utilized to measure body temperatures in the mouth, rectum, or armpit.
Advantage: They are affordable, simple to read, lightweight, portable and need minimal upkeep, and provide precise readings.
Disadvantage: Eventually, the battery powering them runs out, and they are readily broken if dropped.
Liquid-based thermometer:
It is the most basic and widely used type of temperature measurement instrument.
Advantage: They are relatively less expensive. In contrast to electrical thermometers, they don't require a power source or batteries to charge.
Disadvantage: They are fragile, only suitable for manual reading applications, and cannot be automated or digitized. A glass thermometer's liquid components could be hazardous or harmful to your health since they could leak chemicals. Liquid-in-glass thermometer readings require excellent vision.
Learn more about digital thermometers here:
https://brainly.com/question/14471162
#SPJ4
Using a chemical equation to find moles of product from moles of reactant
Answer:
0.86 moles H₂O
Explanation:
To solve this problem, it is important to first determine the balanced chemical equation. The balanced equation is necessary as it will provide the mole-to-mole ratio needed to convert between moles O₂ and moles H₂O.
The unbalanced equation:
C₈H₁₈ (l) + O₂ (g) ---> CO₂ (g) + H₂O (g)
Reactants: 8 carbon, 18 hydrogen, 2 oxygen
Products: 1 carbon, 2 hydrogen, 3 oxygen
As you can see, the equation is not balanced because there are unequal amounts of each element on both sides. Balancing the equation is a matter of guessing-and-checking to see which combination of coefficients work.
The balanced equation:
2 C₈H₁₈ (l) + 25 O₂ (g) ---> 16 CO₂ (g) + 18 H₂O (g)
Reactants: 16 carbon, 36 hydrogen, 50 oxygen
Products: 16 carbon, 36 hydrogen, 50 oxygen
Now that the equation is balanced, we can use the coefficients of O₂ and H₂O to construct our mole-to-mole ratio and perform our conversion. The final answer should have 2 sig figs to match the given value (1.2 moles). The state of matter is most likely not necessary to include in your final answer.
1.2 moles O₂ 18 moles H₂O
--------------------- x ----------------------- = 0.86 moles H₂O
25 moles O₂
How many grams of oxygen are needed to react with 56.8 grams of ammonia?
The amount of oxygen needed would be 80.19 grams
Stoichiometric problemsFrom the equation of the reaction:
[tex]4NH_3 +3 O_2 --- > 2N_2 + 6H_2O[/tex]
The mole ratio of oxygen and ammonia is 3:4
Mole of 56.8g ammonia = 56.8/17 = 3.34 moles
Equivalent mole of oxygen = 3/4 x 3.34 = 2.5059 moles
Mass of 2.5059 moles oxygen = 2.5059 x 32 = 80.19 grams
More on stoichiometric problems can be found here: https://brainly.com/question/15047541
#SPJ1
X, Y & Z represents 2, 12 & 17 relatively a. Write the electronic configuration of x, y, and z b. Place the elements in the appropriate group and period of the periodic table. c. X, Y & Z represents 2, 12 & 17 relatively
The electronic configuration of x, y, and z.
[tex]x=1s^2[/tex]
[tex]Y= 1s^22s^22p^63s^2[/tex]
[tex]Z= 1s^22s^22p^63s^23p^5[/tex]
What is an electronic configuration?Electronic configuration, also called electronic structure, is the arrangement of electrons in energy levels around an atomic nucleus.
a.
[tex]x=1s^2[/tex]
[tex]Y= 1s^22s^22p^63s^2[/tex]
[tex]Z= 1s^22s^22p^63s^23p^5[/tex]
b.
x= Period 1 and group18
Y=Element is in period 3 and Group 2
Z=Element is in period 3 and group 17.
c.
X, Y & Z represents Helium, magnesium, and chlorine.
Learn more about the electronic configuration here:
https://brainly.com/question/19589767
#SPJ1
What is the [H+] if the pH of a
solution is 7.60?
[H+] = [? ] × 10¹2]
Answer:
0.000000025
Explanation:
[H+]=10^-pH
Answer:
2.5 10^-8
Explanation:
I just need the answers I’ve been procrastinating for hours
Answer:
I am sorry
Explanation:
which natural method removes CO2 from the atmosphere
Answer:
carbon dioxide
Explanation:
it is used in photosynthesis
Al(OH)3 + 3HCl= AlCl3 + blank
Complete the equation so that it is a (Double displacement) reaction
Answer:
Al(OH)₃ + 3 HCl ----> AlCl₃ + 3 H₂O
Explanation:
In a double-displacement reaction, the cation of one compound is swapped with the cation of another. The basic structure of these reactions is:
AB + CD ----> AD + CB
In this reaction, the aluminum (Al) of Al(OH₃) is replaced by the hydrogen (H) of HCl, and vice versa.
The first resulting compound is AlCl₃. The chlorine has a subscript of 3 in order to eliminate the +3 charge from the Al cation (+3 + 3(-1) = 0). The second resulting compound is HOH, most commonly written as H₂O. There needs to be a coefficient of 3 in front of H₂O to balance the equation.
The complete balanced equation is:
Al(OH)₃ + 3 HCl ----> AlCl₃ + 3 H₂O
A flask of nitrogen is collected over water at a total pressure 740.0 mmHg. If the partial pressure of the water vapor is 20.0 mmHg, what is the pressure exerted by the nitrogen
The pressure exerted by the nitrogen is 718 mmHg.
The oxygen, which is collected over water, will be mixed with water vapor.
This means that the total pressure of the mixture will have two components
the partial pressure of oxygenand the vapor pressure of water at 20.0∘CThe vapor pressure of water at that temperature is approximately 17mmHg.
P total = P oxygen + P water
P oxygen = 735 mmHg − 17mmHg
P oxygen = 718 mmHg
Vapor pressure or equilibrium vapor pressure is described as the strain exerted by way of a vapor in thermodynamic equilibrium with its condensed levels at a given temperature in a closed gadget. The equilibrium vapor stress is an indication of a liquid's evaporation price.
Learn more about Vapor pressure here: https://brainly.com/question/4463307
#SPJ4
Why does solid substance occur less space than the same in it's gaseous form?
Because the molecules are more closely spaced, the solid occupies less space than the same substance when it is in a gaseous state.
What mass of AI2O3 forms from 16 g O2 and excess AI?
Answer:
2Al+1.5O2→Al2O3
Thus, 2 mol of Al combine with 1.5 mol of oxygen to form 1 mol of Al2O3.
2 mol of Al corresponds to 2×27=54 g.
Thus, the weight of Al used in the reaction is 54 g.
Sodium chloride is composed of molecules that are stable when dry. In water, the atoms of the molecules separate from each other. What type of chemical bond holds the dry substance together
The molecules of Sodium chloride holds a chemical bond to become stable when dry is an ionic bond.
What are chemical bonds?The chemical bonds are those which holds the atoms of molecules together and creates a temporary connection between them.
The three major types of chemical bonds are:
Ionic bondsCovalent bondsMetallic bondsWhat are ionic bonds?The ionic bonds generally occurs in between a metal and a nonmetal ions.
The atoms share electrons in between them to become stable, forms ions. Due to electric attraction between these ions forms a bond between them. That bond is called as Ionic bond.
The type of chemical bond in Sodium chloride:Sodium chloride - NaCl
Where Na(sodium) forms Na⁺ ion(metal) by sharing electrons with the chlorine atom and Cl(chlorine) forms Cl⁻ ion(non-metal).
So, due to the attraction between the anion and the cation, a bond is established between them. So, it is called Ionic bond.
Therefore, the chemical bond in Sodium chloride is an Ionic bond.
Learn more about chemical bonds here:
https://brainly.com/question/704297
#SPJ4
what happens as a result of photoelectric effect
Electrons are emitted from the surface of a metal in photoelectric effect.
What is the photoelectric effect?The photoelectric effect is the emission of electron from the surface of a metal when light is shone on the surface..
For electrons to be emitted, the light must have a certain frequency known as threshhold frequency.
Therefore, electrons are emitted from the surface of a metal in photoelectric effect.
Learn more about photoelectric effect at: https://brainly.com/question/21320305
#SPJ1
What does percent composition tell you about a molecule?
®
A. It tells
you the ratio of elements in the molecular formula.
•
B. It gives you the total number of atoms in the molecule.
•
C. It tells you how much of a molecule IS made up of each element.
•
D. It tells
you how the elements are arranged in the molecule.
Answer:
C
Explanation:
Answer:
The awnser is C: it tells you how much of a molecule IS up of each element.
a satellite with a mass of 100kg fires it’s engines to increase velocity, thereby increasing the size of its orbit around the earth. as a result it moves from a circular orbit if radius 7.5x10^6 m to an orbit of radius 7.7x10^6 m. what is the approximate change in gravitational force from the earth as a result of this change in the satellites orbit?
The approximate change in gravitational force from Earth as a result of the change in radius of the satellite's orbit is -95.07N
What is the universal law of gravitation?The universal law of gravitation states that the particle of matter in the universe attracts another particle with a force directly proportional to the product of their masses and inversely proportional to the square of the distance between them.
It is written thus;
F = G [tex]M_1M_2[/tex]÷ [tex]r^2[/tex]
Where
F = Gravitational force
G = Gravitational constant
[tex]M_1[/tex] and [tex]M_2[/tex] are the masses of the object
r = radius
How to calculate the gravitational force
Formula:
F = G [tex]M_1M_2[/tex]÷ [tex]r^2[/tex]
Given [tex]M_1[/tex] = 100kg
[tex]M_2[/tex] = 5.97 x[tex]10^{24}[/tex] kg
r = 7.5 x [tex]10^6[/tex] m
G = 6.67 x [tex]10^{-11}[/tex] N-m²/kg²
For the first orbit, substitute the values
F = 6.67 x [tex]10^{-11}[/tex]× 150 × 5.97 x [tex]10^{24}[/tex] ÷ (7.5 x[tex]10^6[/tex])[tex]^2[/tex]
F = 5.95 × [tex]10^{16}[/tex] ÷ 56.25 × [tex]10^{12}[/tex]= 105.77 N
For the second orbit of radius 7.7 x 10^6 m
F = 6.67 x [tex]10^{-11}[/tex] × 100 × 5.97 x [tex]10^{24}[/tex] ÷ (7.7 x [tex]10^6[/tex])2
F = 5.95 × [tex]10^{16}[/tex]÷ 59.25 × [tex]10^{12}[/tex] = 200. 84 N
The approximate change = 105. 77 - 200. 84 = -95.07N
Hence, the approximate change in gravitational force from Earth as a result of the change in radius of the satellite's orbit is -95.07N
Learn more about gravitational force here:
brainly.com/question/19050897
#SPJ1
Forms of a given element that have a different number of neutrons are called cosmic rays. True False
Answer:
False
Explanation:
Forms of a given element that have a different number of neutrons are called isotopes.
How will the reaction rate of the SN1 reaction change if the electrophile is switched from the tertiary electrophile to a secondary electrophile in which the methyl group is removed from the alpha carbon
The reaction rate of the SN1 reaction change if the electrophile is switched from the tertiary electrophile to a secondary electrophile will decrease.
SN1 exhibits substitution, nucleophilicity, and monomolecular reaction, and is expressed by the expression rate = k [R-LG]. This means that the rate-determining step of the mechanism depends on the degradation of a single molecular species. Multi-step reactions include intermediates and multiple transition states (TS).
The SN1 reaction is a nucleophilic substitution reaction in which the nucleophile replaces the leaving group (similar to SN2). However, the SN1 reaction is a single molecule. The rate of this reaction depends on the concentration of only one reactant.
Learn more about reaction rate here: https://brainly.com/question/7578129
#SPJ4
You carefully place lettered candy with the letters facing up in water. Without disturbing the water, you notice the letters float above the candy as the solution process takes place. Discuss why this would happen in terms of soluble, insoluble, miscible, immiscible, and water as the universal solvent. Describe the general conditions under which solids are most soluble in liquids.
Oil-based food coloring used to make the letters, won't dissolve in water. According to some sources, oil-based food coloring is either insoluble or immiscible in water. Because it is present in more solutions, water serves as the universal solvent.
Universal solvent:-A substance that displaces most compounds is known as a universal solvent. Because it dissolves more chemicals than any other solvent, water is known as the universal solvent.
What chemicals lack solvability?Sand, plastic, wood, metal, glass, and cloth are examples of insoluble materials. At standard conditions of pressure and temperature, these compounds never dissolve in water or any other solvent. Other examples of insoluble materials are sugars and inorganic salts.
Learn more about universal solvent here:-
https://brainly.com/question/24453293
#SPJ4