We can use different properties and changes to identify a chemical substance through the following below:
Specific pure substances have their own unique properties.When separating mixtures, you can use their properties to determine what separation technique is needed.You can compare properties and changes of an unknown substance to a known one to see if they are the same or different.Different substances will have different properties and will change in different ways.You can create classifications of substances based on their properties and/or changes.What is a Chemical substance?This is referred to as a type of substance which has a definite composition and properties and it is based on different factors.
Pure substances have their own unique properties and a mixture can be separated by using the right techniques through this which is why all is the correct choice.
Read more about Chemical substance here https://brainly.com/question/26487468
#SPJ1
In the fahrenheit temperature scale, water freezes at 32°f and boils at 212°f. In the celsius scale, water freezes at 0°c and boils at 100°c. Given that the fahrenheit temperature f and the celsius temperature c are related by a linear equation, find f in terms of c.
The temperature reading on Fahrenheit scale is related to the The temperature reading on Celsius scale by a linear equation F = 9/5 C + 32
Data for Fahrenheit temperature scale:
Water freezing point = 32⁰
Water boiling point = 212⁰
Therefore, the scale is divided into 212 - 32 = 180 scales.
Data for Celsius temperature scale:
Water freezing point = 0⁰
Water boiling point = 100⁰
Therefore, the scale is divided into 100 - 0 = 100 scales.
Scale ratio:
C : F = 100 : 180 = 5 : 9
It means each increment of 1⁰ on Celsius scale is equal to an increment of 9/5 degree on Fahrenheit scale. However, we need to add an offset 32⁰ on Fahrenheit scale.
Hence, the reading C⁰ on Celsius scale is equivalent to:
F = 9/5 C + 32
Learn more about temperature unit here:
https://brainly.com/question/23428818
#SPJ4
1. If a ball starting at rest has a mass of 0.25 kilograms and is pushed with a force of 3.5 N, then what is the acceleration for the object from the applied force? SHOW YOUR WORK.
2. Use this equation to calculate the height a rocket reaches if the rocket were launched and it took 1.3 seconds to reach this unknown height and assuming that the acceleration is 9.81 m/s2. SHOW YOUR WORK.
The acceleration for the object from the applied force is 14 m/s².
The height reached by the rocket is 8.28 m.
What is the acceleration of the ball?
The acceleration of the ball is calculated by applying Newton's second law of motion as shown below.
F = ma
a = F/m
where;
F is the applied force
m is the mass of the balla is the acceleration of the balla = 3.5 N / 0.25 kg
a = 14 m/s²
The height reached by the rocket at the given time of motion is calculated as follows;
h = vt + ¹/₂gt²
where;
v is the initial vertical velocity of the rocket = 0h = 0 + ¹/₂gt²
h = ¹/₂(9.8)(1.3)²
h = 8.28 m
Thus, the acceleration for the object from the applied force is determined from Newton's second law of motion while the height reached by the rocket is determined by applying the second kinematic equation.
Learn more about acceleration here: https://brainly.com/question/14344386
#SPJ1
Consider the balanced reaction 6 A(aq) + 7 B(aq) → 7 C(s) + 6 D(g) and the molar masses provided in the table below. Compound Molar Mass (g/mol) A 27.97 B 62.49 C 22.01 D 39.31 Suppose that 4.0 L of a 0.20 M solution of A is mixed with 3.0 L of a 0.20 M solution of B. The given reaction then proceeds to completion in the container. How many grams of C are theoretically obtainable? Report your answer to three decimal places (ignore significant figures).
The theoretical yield of C that is obtained is 13.26 g.
What is the theoretical yield?We know that the theoretical yield has to do with the amount of the substance that is obtained as we can get it from the stoichiometry of the balanced reaction equation. Hence the first step that we have to carry out is to try to obtain the balanced reaction equation that can be used to describe the reaction as it has been shown.
The balanced reaction equation is;
6 A(aq) + 7 B(aq) → 7 C(s) + 6 D(g)
Number of moles of A = 4.0 L * 0.20 M = 0.8 moles
Number of moles of B = 3.0 L * 0.20 M = 0.6 moles
Now;
6 moles of A reacts with 7 moles of B
0.8 moles of A reacts with 0.8 moles * 7 moles/6 moles
= 0.93 moles
Thus B is the limiting reactant.
If 7 moles of B yleds 7 moles of C
Amount of C obtained = 0.6 moles
Mass of C obtained = 0.6 moles * 22.01 g/mol
= 13.26 g
Learn more about the theoretical yield:https://brainly.com/question/14966377
#SPJ1
A LOT OF POINTS!!
30.0g sample of calcium sulfide contains 16.4g of calcium. What is the % of sulfur by mass in the compound
Answer:
there you go man
Explanation:
Please help^^
Vinegar will/will not dissolve in water and will/will not dissolve in vegetable oil because it is polar/nonpolar/ionic.
Rubbing alcohol will/will not dissolve in water and will/will not dissolve in vegetable oil because it is polar/nonpolar/ionic.
Salt will/will not dissolve in water and will/will not dissolve in vegetable oil because it is polar/nonpolar/ionic.
Answer:vinegar will disolve in water, water will not go into veg oil because it is polar.
rubbing alcohol will disolve in water and not in vegtable oil because it is nonpolar
salt will disolve and water will not disolve in veg oil because it is ionic
Explanation:
Objective: Students will create a mini-poster (on a Word document) that visually illustrates the process of balancing a chemi equation for Na + __H2O → __NaOH + __H2 1. In the top half of the poster, for the unbalanced chemical equation: ✓ In large letters, write the unbalanced chemical equation using the formulas of the substances. ✓ In large letters, write the unbalanced chemical equation in words, using their knowledge of naming compounds. ✓ Represent the number of atoms of each element with colored circles ("atoms"). ✓ Show an inventory of the atoms on the reactant side and the product side (i.e. 2H, 20).
The unbalanced chemical equation is: Na + H₂O → NaOH + H₂
The unbalanced chemical equation in words: One mole of sodium atom reacts with one mole of water to form one mole of sodium hydroxide and one mole of hydrogen gas.
The number of atoms on the reactant side is: 1 Na, 2 H, and 1 O
The number of atoms on the product side is: 1 Na, 3 H, and 1 O
What are chemical equations?Chemical equations are equations that use the symbols of the elements to represent the chemical reaction that occurs between elements or compounds called reactants to form products.
A chemical equation may be balanced or unbalanced.
A chemical equation is unbalanced when the number of moles of atoms of each element reacting is not equal on both sides of the reaction.
A chemical equation is balanced when the number of moles of atoms of each element reacting is equal on both sides of the reaction.
Learn more about chemical equations at: https://brainly.com/question/11231920
#SPJ1
the molar absorptivity of a compound at 500 nm wavelength is 252 m-1cm-1. suppose one prepares a solution by dissolving 0.00140 moles of a solute in enough water to make a 500.0 ml solution. what would be the absorbance in a 6 .00 mm pathlength cell? type answer:
Based on Beer's law and the data provided (molar absorptivity, number of moles, volume of the solution, cell dimension) we can calculate that the absorbance of the sample will be 0.42336.
According to Beer's law, the measured absorbance is proportional to the molar absorptivity of the substance, its molarity in the sample, and the pathlength of the cell:
A = ε * c * l
ε - molar absorptivity (252 M⁻¹cm⁻¹)
c - molarity of the sample
l - pathlength (6.00 mm = 0.6 cm)
To calculate the absorptivity we need to calculate the molarity of the sample:
c = n/V = 0.00140 mol / 0.5000 L = 0.00280 M
A = 252 M⁻¹cm⁻¹ * 0.00280 M * 0.6 cm = 0.42336
You can learn more about Beer's law here:
brainly.com/question/12185222
#SPJ4
Which planet is the farthest away from the Sun? Is this always true? Explain
your answer.
Answer: Pluto
Explanation: Ok, so Pluto is the farthest. It is 3.7 billion miles away from our sun.
What is the density
Answer:
i dint not knowwws wj
example
Explanation:
this is so hard someone give answer
a density is a height and can the numbers
maid that because is too long with a
short 40.-- micality
hope itz help
what are the function and structure of a bacteria
Answer:
the cell wall forms a rigid structure of uniform thickness around the cell and is responsible for the characteristic shape of the cell (rod, coccus, or spiral).
Wat units are used to express mass an weight .
Answer:
gram (g), kilogram (kg) and tonne (t).
Explanation:
What change must made to the coefficients to balance this equation?
C3H8 + 5 O2 → 4 CO2 + 3 H2O
Switch the 3 and the 4, this change must made to the coefficients to balance this equation.
Now, the correct balance equation is C₃H₈ + 5 O₂ → 3 CO₂ + 4H₂O
This method of balancing chemical equations involves assigning algebraic variables as stoichiometric coefficients to each species in the unbalanced chemical equation.
Learn more about balance equation here:- https://brainly.com/question/11904811
#SPJ1
liquid hexane will react with gaseous oxygen to produce gaseous carbon dioxide and gaseous water . suppose 43. g of hexane is mixed with 85.1 g of oxygen. calculate the maximum mass of water that could be produced by the chemical reaction. round your answer to significant digits.
The mass of water produced is 35.27g in the given chemical reaction.
A chemical reaction is the chemical change of one set of chemical components into another. A chemical reaction is the process through which two or more molecules combine to create a new product(s). Compounds that combine to make new compounds are referred to as reactants, while the newly produced compounds are referred to as products. When chemical bonds between atoms are established or destroyed, chemical reactions occur. Breaking chemical bonds between reactant molecules and establishing new bonds between atoms in product particles are examples of chemical reactions. The number of atoms is the same before and after the chemical transition, but the number of molecules changes.
Balanced equation:
[tex]2C_6H_{14} + 19O_2 \rightarrow 12CO_2 + 14H_2)[/tex]
Given:
Mass of hexane = 43g
Mass of oxygen = 85.1g
To find:
Mass of water formed = ?
Calculations:
According to the balanced equation, 2 moles of hexane react with 19 moles of oxygen to form 12 moles of carbon dioxide and 14 moles of water.
Molar mass of hexane = 86.118g/mol
Molar mass of oxygen = 32g/mol
(2 x 86.118)g of hexane required = (19 x 32)g of oxygen
43g of hexane required = (19 x 32) / (2 x 86.118) x 43
= 151.79g of oxygen
But we have only 85.1g of oxygen, thus it is a limiting reagent
Now,
(19 x 32)g of oxygen reacts to produce = (14 x 18)g of water
85.1g of oxygen reacts to produce = (14 x 18) / (19 x 32) x 85.1
= 35.271g of water
Result:
35.27g of water is produced.
Learn more about Chemical reactions here:
https://brainly.com/question/15317537
#SPJ4
Which of these is an example of a resistor?
A
a battery, which has a positive and negative terminal
B
a light bulb that impedes the flow of electricity
C
an electrical charge moving at a constant rate
D
a conductive path that forms a closed loop
The correct example of a resistor is option (B) a light bulb that impedes the flow of electricity.
A light bulb that impedes the flow of electricity is an example of a resistor.
A resistor is a passive two-terminal electrical element that implements electrical resistance as a circuit element. In digital circuits, resistors are used to reduce modern flow, regulate sign stages, to divide voltages, bias lively elements, and terminate transmission lines, amongst different uses.
A resistor is an electrical thing that limits or regulates the flow of electrical current in an electronic circuit. Resistors can also be used to offer a specific voltage for an lively tool such as a transistor.
Learn more about resistor here:- https://brainly.com/question/14883923
#SPJ1
8. At the same concentration (100 mM which is 0.1 M), should the
measured absorbance at 500 nm for three red solutions (drink mix,
cobalt (II) nitrate and cobalt (II) chloride) be similar.
yes or no
Because red and its complementary hue, green, are communicated, we see CoCl2 as a red color. Green, however, is its complementary color and is what is absorbed. The only color that can be seen is the color that is communicated. Red is what we can see, not green.
What is Absorbance ?The logarithm of the ratio of incident to transmitted radiant power through a sample is known as absorbance. As an alternative, absorbance can be defined as "the negative logarithm of one minus absorptance, as measured on a homogeneous sample," for samples that scatter light.
Absorbance is the amount of light at a particular wavelength that a substance or item is able to absorb. The real absorbance unit is referred to as absorbance units (abbreviated as AU). Transmittance, on the other hand, is a term used to describe a measurement of how much light is reflected by a substance at a specific wavelength.As opposed to absorption, which occurs when electrons move up to a higher energy state from a lower energy state, emission occurs when electrons move down to a lower energy state, giving rise to a negative energy. When electrons undergo an energy change that is positive and migrate from one state of lower energy to another, this is called absorption. The color that can be seen by the eye is called the transmitted color, whereas the color that cannot be seen is called the absorbed color. The ntary color is discernible.
To know more about Absorbance please click here : https://brainly.com/question/1446990
#SPJ13
74.22g lithium bromide is dissolved in 52.71 mL water. Calculate the molarity of the
solution.
Answer:
Your search - 74.22g lithium bromide is dissolved in 52.71 mL water. Calculate the molarity of the solution. - did not match any documents.
Suggestions:
Make sure that all words are spelled correctly.
Try different keywords.
Try more general keywords.
Try fewer keywords.
Human Hair Predicts Weathery
Bad hair days are not new to science! In 1783, Swiss geologist Horace Benedict de
Saussure observed that strands of hair lengthen or contract when exposed to
different levels of moisture. He uused this knowledge to invent a device that used
human hair to measure the amount of moisture in the atmosphere.
The hair hygrometer was just one tool used to measure changes in the atmosphere.
Can you think of any others? With a partner, brainstorm a list of techniques or tools
that are used to record weather. Write your ideas in the space below.
Hair fall is due to weather change and due to humidity in weather. Hair fall can be because of chemical in oil and shampoo.
What are chemicals?Chemicals are defined as a substance is a type of matter with a consistent chemical composition and distinct properties.
It can also be defined as a substance that cannot be broken down without undergoing change.
Chemicals are the substances that are used in chemistry experiments.
There are five main types of chemicals.
Organic chemicalsInorganic chemicalsAnalytical chemicalsPhysical chemicalsBiochemicalsSome of the common chemicals are
Sulphuric acidHydrochloric acidSodium hydroxideEthanolMethanolThus, hair fall is due to weather change and due to humidity in weather. Hair fall can be because of chemical in oil and shampoo.
To learn more about chemicals, refer to the link below:
https://brainly.com/question/13145357
#SPJ1
if the heat of fusion for water is 80. cal/g, how many calories are needed to melt 2.96 g of ice at 0 °c? treat the heat of fusion as an exact value.
The calories needed to melt the ice is 236.8 calories.
Heat of fusion also called latent heat is the heat constant needed to change the phase of a material such as solid to liquid or liquid to gas. The total calories or energy needed depends on the mass of and the heat of fusion and mass. It can be written as
Q = m . L
where Q is total heat, m is mass and L is latent heat.
From the question above, the given parameters are
m = 2.96 g
L = 80 cal/g
By substituting the mass and heat of fusion, we can calculate the total calories
Q = m . L
Q = 2.96 . 80
Q = 236.8 cal
Find more on calories at: https://brainly.com/question/220611
#SPJ4
aqueous hydrobromic acid will react with solid sodium hydroxide to produce aqueous sodium bromide and liquid water . suppose 37. g of hydrobromic acid is mixed with 8.28 g of sodium hydroxide. calculate the minimum mass of hydrobromic acid that could be left over by the chemical reaction. be sure your answer has the correct number of significant digits.
Answer: 26g
Explanation:
First, write the correctly balanced equation for the reaction taking place:
HBr(aq) + NaOH(s) ==> NaBr(aq) + H2O(l) ... balanced equation
Next, find out which reactant is limiting. An easy way is to just divide the moles of each reactant by the corresponding coefficient in the balanced equation (1 for both in this case):
HBr: 46.1 g HBr x 1 mol HBr / 80.9 g = 0.570 moles
NaOH: 10. g NaOH x 1 mol NaOH / 40. g = 0.25 mols NaOH
NaOH is limiting and will determine the maximum amount of product that can form.
Maximum amount of NaBr that can form:
0.25 mols NaOH x 1 mol NaBr / 1 mol NaOH x 103 g NaBr / mol = 25.75 g NaBr = 26 g NaBr (2 s.f.)
in setting up this experiment, a student noticed that a bubble of air leaked into the eudiometer tube when it was inverted in the water bath. what effect would this have on the measured volume of hydrogen gas? would the calculated molar volume of hydrogen be too high or too low as a result of this error? explain.
The calculated molar volume of hydrogen will be too high as a result of this error
The gas being recorded during the experiment would not only include hydrogen gas, but the air that leaked into the eudiometer tube as well. This leads to the increase in the volume of hydrogen gas which will be too high. Since the volume of hydrogen is too high, the calculated molar volume of hydrogen would also be too high.
Learn more on molar volume of hydrogen from:
https://brainly.com/question/25124033?referrer=searchResults
#SPJ4
consider the given balanced equation. c 3 h 8 5 o 2 ⟶ 3 c o 2 4 h 2 o how many moles of carbon dioxide are formed when 3 moles of propane ( c 3 h 8 ) react? select one: 12 4 3 9
Based on the balanced reaction equation, 9 moles of carbon dioxide are formed when 3 moles of propane are combusted.
From the balanced reaction equation we can see that 3 moles of carbon dioxide are formed upon the combustion of a single mol of propane:
C₃H₈ + 5 O₂ → 3 CO₂ + 4 H₂O
These molar ratios are constant and enable us to set up a simple proportion:
1 mol of propane : 3 mol of carbon dioxide = 3 mol of propane : X
X = 3 mol of carbon dioxide * 3 mol of propane / 1 mol of propane
X = 9 mol of carbon dioxide
You can learn more about balanced reaction equations here:
brainly.com/question/22064431
#SPJ4
Why is it important that we are very careful in how much acid is added to neutralize the reaction?.
Mixing an acid and a base does not necessarily neutralize them. Neutralization refers to the situation where equal parts of acid and base are mixed.
If equal parts of a strong acid and a strong base are mixed, the pH of the resulting solution will be very close to 7 depending on factors such as temperature. However, if a strong base is used to neutralize a weak acid the resulting solution will have a pH greater than 7 basic and if a weak base is used to neutralize a strong acid, the resulting pH will be less than 7.
It is therefore not entirely correct to say that all acid-base reactions are examples of neutralization only those where acids and bases are mixed in stoichiometrically equal amounts. Hazardous material spills must be absorbed, neutralized, or controlled in the event of an accident to ensure workplace safety. Neutralization of acids and bases allows for safer handling of spills and reduced disposal costs.
Learn more about The reaction here:-https://brainly.com/question/11231920
#SPJ4
What does "group" mean in the Periodic System?
Answer:
A column in the periodic table of the chemical elements.
Answer:
A group is the arrangement of elements vertically, in the periodic table. It can be determined by the number of valence electrons present in the atom.
A student is told that both energy and mass must be conserved in every chemical reaction. She measures the mass of Hydrochloric acid and a zinc strip separately. She then places the zinc strip into the acid and bubbles form as the zinc looks like it disappears. The combined mass afterward is less than the original.
Which of these can explain this result?
The bubbles indicate that a gas is created and mass is lost as it escapes from the container.
Why stduent is told that the both energy and the mass must be conserved in every chemical reaction?
According to the the law of conservation of mass states that in a chemical reaction mass is neither created nor destroyed.So that the student told that both the energy and mass must be conserved in every chemical reaction.
Learn more about chemical reaction.
https://brainly.com/question/11231920
#SPJ9
Calculate the mass of 4.00 moles of NH₂OH (s).
Answer:
132.12 grams
Explanation:
The mass of a compound equals the number of moles times the molar mass.
The molar mass of hydroxylamine is 33.03 grams/mole
The number of moles is 4 moles
4 moles * 33.03 grams/mole = 132.12 grams
Which is an example of radioactivity that occurs when a neutron is converted to a proton and an electron is emitted from the nucleus?
answer: emission of a BETA particle
An example of radioactivity that occurs when a neutron is converted to a proton and an electron is emitted from the nucleus and emission of a beta particle
Radioactivity is the phenomena in which spontaneous disintegration of unstable atomic nuclei to form more energetically stable atomic nuclei and radioactive decay is the highly exoergic and radioactivity that occurs when a neutron is converted to a proton and an electron is emitted from the nucleus and emission of a beta particle and beta particle is emitted by radioactivity by conversion of neutron to proton and fast moving electron and radioactive decay by the loss of an electron from the nucleus
Know more about proton and electron
https://brainly.com/question/14571542
#SPJ1
How is the population of axolotls bred in captivity different from the population that lives in the wild? Pls Help :(
1. Only captive axolotls retain the features of a juvenile as adults.
2. Wild axolotls can survive on land.
3. The skin of axolotls bred in captivity usually has little to no coloring.
4. Only axolotls bred in captivity can regrow limbs
The populations of axolotls that are raised in captivity are able to regrow limbs but those grown in the wild can not.
What are the axolotls ?The axolotls are one of the populations of the organisms that are facing the threat of extinction. This implies that if nothing is seriously done to ensure that the populations do not go into extinction, they would all soon disappear from the face of the earth.
The response to this situation have been to ensure that the there is a conscious effort to make sure that the axolotls does not disappear from the face of the earth and most of this effort have been made by raising some populations in captivity. The populations raised in the wild are different from those raised in captivity.
Learn more about axolotls :https://brainly.com/question/28187758
#SPJ1
For quantum numbers, if n=5, what is the subshell of l=4? can l be bigger than 3?
Answer:
a) The subshell would be 5g .
b) Yes L can be bigger than 3 in case of n=5.
Explanation:
a) The given principle quantum number n=5 signifies the 5th orbit. Also, the given Azimuthal quantum number l=4 represents the g subshell. Thus, the subshell in which the electrons with the given set of principle and azimuthal quantum number are found is 5g.
b) As n=5 and the general rule is l=n-1. So L can be equal to 1,2,3 or 4.
What is the difference between a controlled, dependent, and independent variable in
an experiment?
A controlled variable is one that is constant and is unchanged in an experiment. It is held constant in order to observe the result of the independent variable.
An independent variable is the variable that is being changed in the experiment in each trial, while a dependent variable is the one that is being measured.
11. How much energy is required to heat 120.0g of water from 2.0 C to 24 C
Answer:The specific heat of water is 1 calorie/gram °C = 4.186 joule/gram °C.
Explanation:Therefore the required amount of energy is following:
Q = c*m*dT = 4.186 * 120 * (24 - 2) = 11,051 J