The y-component of vector (a ) is -7.0j m/s²
In science, anything that has both a direction and a magnitude is referred to as a vector. They are typically represented by pointing arrows, the length of which denotes the size of the vector. The direction is then crucial in accordance with the vector.
We are given that,
the x -component of vector (a)x = 7.0m/s²
The acceleration in vector sum form x - direction and y - direction is given as,
[tex]a = a_{x} +a_{y}[/tex]
So that , the (-y-direction) acceleration then x- component must be zero then,
[tex]a =(7.0i) + (-7.0j)\\a= - 7.0j[/tex]
Thus, the acceleration on -y- direction will be -7.0jm/s²
To know more about vector
https://brainly.com/question/11238162
#SPJ1
4. given long wire connecting c and d c d 220 v where the motor is drawing 8 amps and the lamp 2 amps, find a. the voltage drop across the wire - modeled by the 2 ohm resistor. b. the voltage across the motor and lamp
a dc 2-wire system is to be converted into ac 3-phase, 3-wire system by the addition of a third conductor of the same cross-section as the two existing conductors. calculate the percentage additional load which can now be supplied if the voltage between wires and the percentage loss in the line remain unchanged. assume a balanced load of unity power factor.
The percentage of additional power transmitted is 73.2%.
A conductor is an object or form of fabric that permits the flow of fee in a single or extra instruction. Materials manufactured from steel are not unusual electrical conductors.
A conductor, or electrical conductor, is a substance or fabric that allows energy to drift through it. In a conductor, electric rate carriers, typically electrons or ions, pass without problems from an atom to an atom when voltage is carried out.
IN DC 2-WIRE SYSTEM
If R is the resistance oper conductor,then the power transmitted is
P=VI
And power loss is = I²R
IN AC 3-PHASE 3 WIRE SYSTEM
P=√3VIcos φ
=√3VI [as unity power factor,cos φ=1]
power loss= 3I²R
The percentage of additional power transmitted in a phase 3 wire ststem is
(√3VI-VI )/ VI *100 =73.2%
Learn more about conductors here:-https://brainly.com/question/24154868
#SPJ4
1. A chickadee flies 30 m to the West for 6 seconds and then 40 m to the North for 14 seconds. What is the average velocity of the chickadee’s flight?
The magnitude of the average velocity of chickadee flight is 2.5 m/s
What is average velocity?
Average velocity is defined as the rate of change of displacement with respect to time. Mathematically, we can write -
v = Δx/Δt
Given is a chickadee who flies 30 m to the West for 6 seconds and then 40 m to the North for 14 seconds.
Now, the displeacement of the chickadee, can be calculated as follows -
|Δx|² = (30)² + (40)²
|Δx|² = 900 + 1600
|Δx|² = 2500
|Δx| = [tex]\sqrt{2500}[/tex]
|Δx| = 50
Now, the average velocity of the chickadee will be -
v = |Δx|/Δt
v = 50/(6 + 14)
v = 50/20
v = 2.5 m/s
Therefore, the magnitude of the average velocity of chickadee flight is 2.5 m/s
To solve more questions on kinematics, visit the link below-
https://brainly.com/question/21279146
#SPJ1
problem 4: a disk of mass m and radius r, a hoop of mass 2m and radius r, and a ball of mass m and radius 2r are rolling without slipping. the hoop can be treated as a thin ring and the ball should be modeled as a hollow sphere.
a. Angular speed, w = v/r where v is the linear speed, r is the radius
b. v = w*r
c. I(disk)=1/2mr^2,I(hoop)=mr^2, I(Ball)=8/3mr^2 disk is the smallest moment of inertia.
A body has an attribute called inertia that makes it resist attempts to move it or, if it is already moving, to alter the speed or direction of its motion. A body's inertia is a passive characteristic that prevents it from doing anything other than opposing active agents like forces and torques. A moving body continues to move not because of its inertia but rather because no force exists to stop it, alter its direction, or accelerate it.
A body's moment of inertia, which quantifies its resistance to the action of a force, and its mass, which determines how resistant it is to the action of a force, are two numerical measures of inertia.
Learn more about inertia here:
https://brainly.com/question/1358512
#SPJ4
constant pressure cooling of steam. steam at 200°c and 10 bar is cooled under constant pressure until it becomes a saturated liquid. a. what is the final temperature? b. how much heat is removed from the steam? c. calculate the work involved in this process, if any.
From steam table,
(a).
The final temperature is 180°C.
At 10 bar, saturated liquid,
Temperature = 180°C
(b).
Heat removed from the steam is 2065.6 kJ/kg.
At 10 bar - 200°C, h1 = 2828.27 kJ/kg
At 10 bar, saturated liquid, h2 = 762.68 kJ/kg
Heat removed = h1 - h2 = 2065.6 kJ/kg
(c).
Work done is 204.9 kJ/kg.
Work done = heat removed - change in internal energy = 2065.6 - (2622.26 - 761.55) = 204.9 kJ/kg
Learn more about temperature here:- https://brainly.com/question/2339046
#SPJ1
the magnetic portion of a standard circuit breaker? select one: a. provides an instantaneous trip for high levels of current b. protects the circuit from heat damage generated by lower level currents c. prevents the device from tripping due to a short circuit d. provides a trip delay for high levels of current
Fuse, breakers, and other overcurrent protection devices set an appropriate current limit and sever short circuits.
The size of the overcurrent protection system depends on the overcurrent protection system type and the maximum current that can travel through the circuit components. National codes specify the size and design of the overcurrent protection system. The size of the overcurrent protection devices is typically determined by the array's short-circuit current.
The PV is a limited current source, meaning that the short-circuit current is the highest current produced by this source, which is the major justification for choosing the array's short-circuit current.
The distribution lines of electric grids integrated with DER are safeguarded by an overcurrent protection system. The phase overcurrent protection and the ground overcurrent protection are two further classifications for this protection strategy. Depending on the distribution method, the relays employed in such schemes could be either directional (functioning for in-front events) or nondirectional (working for all). Radial distribution systems are where nondirectional relays are most frequently employed.
To know more about overcurrent protection click on the link:
https://brainly.com/question/28275759
#SPJ4
your car has been making an odd noise consistently for about a week. one day while driving, the sound suddenly changes and becomes louder than it was before. the fact that you notice the change indicates that the volume of the sound has crossed your
Option c is the right solution. This shows that it has gone beyond the threshold when the difference is immediately noticeable.
The lowest kinetic energy that two moving particles must have when they collide is known as the threshold energy in particle physics. Always larger than or equal to the desired particle's rest energy is the threshold energy. As a result, this is changed to: f = W/h, where h is the Planck constant. So, we can calculate the threshold frequency if we know the work function. Photoelectric effect in radioactivity. The frequency at which the effect is only feasible is known as the photoelectric threshold frequency, denoted by the Greek letter nu with the subscript zero, v0. The threshold energy is the lowest energy that each colliding molecule must have in order for the collisions to be successful.
Learn more about threshold here:
https://brainly.com/question/2567979
#SPJ4
your friends have heard that you took an astronomy class and they need your advice. they plan to get married at sunset, and they want the moon to be high in the sky. what phase should the moon be?
In astronomy class friends plan to get married at sunset, and they want the moon to be high in the sky. The moon should be First Quarter phase.
The study of the cosmos and everything in it that is not within the atmosphere of Earth is referred to as astronomy. Astronomers investigate the locations, movements, and characteristics of celestial objects. Astrology tries to understand how those placements, motions, and qualities impact people and events on Earth. The main distinction between astrology and astronomy is what determines the outcome. The Sun and Moon's effects during a particular zodiac sign are interpreted by the ancient tradition of astrology. 12 divisions of the sky, each measuring precisely 30 degrees, are said to exist in astrology. The scientific community has rejected astrology because it lacks the ability to explain how the cosmos works. The premises and claimed effects described in astrological traditions have not been proven by scientific research to be true.
Learn more about astronomy here:
https://brainly.com/question/14375304
#SPJ4
what is WO2 name in chemical compounds
Answer:
Tungsten oxide...
hop e it helps
HELP ILL GIVE BRAINLYIST Compare the interaction between light and two different materials: a reflective glass mirror and a transparent glass block. How did the light behave differently
Answer: See Below
Explanation:
A reflective glass mirror will reflect all the components of white light and not allow visible light to pass through.
A transparent glass block will allow light to pass through with some refraction.
6. Substances soluble in water possess which molecular characteristic that substances insoluble in water lack?
Substances that are soluble in water are polar substances which is a molecular characteristics that is not possessed by insoluble substances.
What is molecular characteristics?The molecular characteristics of a substance is the features that are exhibited by the ions and molecules of that substance that makes it unique from others.
Soluble substances are those substances that are able to dissolve in water while insoluble substances are those substances that are not able to form solution with water.
Example of soluble substances are salt and sugar while examples of insoluble substances are metals and fat.
The soluble substances are polar substances are they possess a negative and a positive pole in their molecules that allows for dissolution in water.
Learn more about molecules here:
https://brainly.com/question/26388921
#SPJ1
Which are assumptions of the kinetic theory?
The assumptions of the kinetic theory is given below.
A gas of a pure material is made up of identical molecules.The molecules are always in a constant random motion. We can ignore the intermolecular forces.The ratio of space-volume to molecules is negligible.Total momentum and kinetic energy are conservedA gas molecule always travels in a straight line with the constant speed between two successive collisions.We can assume that a gas molecule is an ideal particle.The kinetic theory postulates that liquid molecules constantly move, expressing their thermal energy. These molecules frequently clash with one another, and occasionally one or another surface collision gains enough momentum to propel it out of the liquid and into the sky.
To know more about kinetic theory here:
https://brainly.com/question/14349214
#SPJ1
A sample starts with 1.0x10^16 nuclei of 3,1^H which has a half life of 12 years. Whats the half life after 12 years?
Answer:
See below
Explanation:
The half life is 12 year, so after 12 years HALF Of the sample will be gone and half will be left
1/2 * 1 x 10^16 = .5 x 10^16 = 5 x 10^15 nuclei
A block rests on top of a
table. Consider only the
forces acting upon the
block.
Gravity: P or A?
Spring: P or A?
Tension: P or A?
Friction: P or A?
Air Res: P or A?
Normal: P or A?
In case of a block resting on the top of a table and we are considering only the forces acting upon the block.
(block)
_______[[[[[[[[[]]]]]]]]]]_______ ( table)
/ \
/ \
/ \
figure represents block resting on a table,
Gravity P
Spring: A
Tension A
Normal: P
Friction A
Air Res.: A
All objects are affected by gravity, which is an attraction between the Earth and the object.There is no spring force since no springs are in contact with the item.There are no tight-knotted strings (or ropes, or...) attached to the thing so no tension.A solid surface is immediately supporting the block (the table).There is no friction since the object is not moving or attempting to move over a surface.There is no air if an object is not moving in relation to the air around it.To learn more about forces on a block at rest , visit
https://brainly.com/question/28793511
#SPJ9
when the spectrum of light from a star is redshifted, the star must be when the spectrum of light from a star is redshifted, the star must be moving away from you moving toward you cooling off ready to explode
The distance traveled will therefore simply be equal to the original velocity multiplied by the time period. The result of adding these two numbers together is about 2.41, or 4 times 10 to the ninth meters.
Some star material, with an initial velocity of roughly 40,232,600 m/s, is accelerated outward in specific shock waves that are created by a star dying. Let's record that as beginning velocity, which is 40 million 233,600 meters per second. And we inquired as to how far it travels in a minute. Since we are in space, there are essentially no accelerations to take into account. Therefore, we don't need to think about any form of slowing down or speeding up of this velocity.
The distance traveled will simply be equal to the original velocity multiplied by the time interval because this is how long it has been moving. And when we combine those two figures, we get a result of around 2.41, or 4 times 10 to the ninth meters.
To know more about velocity click on the link:
https://brainly.com/question/18084516
#SPJ4
at the instant a ball is thrown horizontally with 100m/s, an identical ball is dropped from the same height. which ball hits the ground first? (ignore air resistance) * 1 point a)the horizontally thrown ball b)the dropped ball c)neither - they both hit the ground at the same time d)the horizontally thrown ball never reaches the ground. it keeps circling earth.
option c When a ball is thrown horizontally at 100 m/s, a second ball is dropped from the same height at the exact same moment neither they both hit the ground at the same time .Here gravitational force plays role.
Gravitational force tells if Any two bodies' mutual attraction is directly proportional to the sum of their masses and inversely proportional to the square of their separation. As a "thought experiment," Newton proposed the Newton's cannonball, which supports the idea that gravity is a powerful force that affects planetary motion.
He assumed a cannon on top of a very tall mountain peak in this thinking experiment. If the cannon is loaded with gunpowder and fired, the following situations might occur.
If the cannon's speed is modest, it will fall to Earth in a projectile motion.
If the speed of the cannon is equal to the orbital speed at that altitude, the cannonballNo change in gravity affects the speed of light.
Learn more about gravitational force here:
https://brainly.com/question/12528243
#SPJ4
a 44kg box is sitting on a flat surface. the box is being pulled along at constant velocity. if the coefficient of static friction is 0.44 and the coefficient of kinetic friction is 0.27, what is the force of friction on the block?
Force of friction if the coefficient of static friction is 0.44 is 189.728N. The force of friction if the coefficient of kinetic friction is 0.27 is 116.424N.
Force of friction:
The force that resists the sliding or rolling of one solid object over another is called the force of friction.
The formula for the force of friction is:
F =μN
F = force of friction
μ= coefficient of friction
N = normal force
We have to find the force of friction when the coefficient of static friction is 0.44.
[tex]F_{s}[/tex] = μ N
= μmg
= 0.44× 44×9.8
= 189.728N
Now we have to find the force of friction when the coefficient of kinetic friction is 0.27
[tex]F_{k}[/tex] = μN
= μmg
= 0.27 × 44 × 9.8
= 116.424N
Therefore the force of friction [tex]F_{s}[/tex] is 189.728N and [tex]F_{k}[/tex] is 116.424N
To know more about the force of friction refer to the link given below:
https://brainly.com/question/24386803
#SPJ4
2. Matt always brings sugar cubes with him when he visits his horse Trinity. Matt noticed that Trinity would become excited after eating the sugar cubes. However, now Trinity seems to get excited as soon as she sees Matt.
NS:
UCS:
UCR:
CS:
CR:
Answer:
i don't know what?
Explanation:
i said what?
rocket a passes earth at a speed of 0.70 c. at the same time, rocket b passes earth moving 0.86 c relative to earth in the same direction. how fast is b moving relative to a when it passes a?
Rocket B's speed in relation to rocket A is 0.4c
If the two frames of reference's directions are at odds with one another, the two frames of reference would see the relative speed as the total of their individual speeds. Furthermore, if the motion of the two frames is parallel, relative speed would be seen as the difference between the individual speeds.
The Earth's frame of reference is at rest, but the two rockets passing by are traveling relativistically with respect to Earth.
Since both rockets are moving in the same general direction, rocket B's relative speed to rocket A is equal to the difference between the two rockets' individual speeds.
Speed of rocket A is v = 0.70c
speed of the rocket B is u =0.86c
let,
speed of the rocket B with respect to rocket A is u₁
Now,
u₁ = (u - v) / [(1 - u) * (v / c²)]
u₁ = (0.86 - 0.70) / (1 - 0.86 * 0.70 / c²)
u₁ = 0.16 / (1 - 0.6) = 0.16 / 0.4
∴ u₁ = 0.4c
To know more about frames of reference, refer to this link:
https://brainly.com/question/9820962
#SPJ4
a proton with a speed of 3 x 105 m/s falls through a potential difference v and thereby increases its speed to 5 x 105 m/s. through what potential difference did the proton fall?
8.33 x 10²v .
The potential difference at which proton fall is : = 8.33 x 10²v .
What is potential difference?The work done in moving a unit of positive electric charge from one point to another is defined as potential difference.Electric potential is the work done per unit charge to bring a charge from infinity to a point in an electric field, whereas electric potential difference is the potential developed while moving a charge from one point in the field to another.Here,
The potential difference is as follows:
Energy change, [tex]e^{v}[/tex] = 1/2 m(v2² - v1²)
By substituting,
1 . 602 x 10 ⁻¹⁹ = 1/2 x 1.67 x 10 ⁻²⁷( 5² - 3²) x 10 ¹⁰
v x 1.602 x 10⁻¹⁹ = 0.835 x 10⁻¹⁷ x 16
v = ( 0.835 x 10⁻¹⁷ x 16 ) / 1.602 x 10⁻¹⁹
= 0.835 x 10²x16 / 1.602
= 13.36 x 10² / 1.602
= 8.33 x 10²v
So the potential difference is : 8.33 x 10²v .
To learn more about potential difference refer to :
https://brainly.com/question/24142403
#SPJ4
a 0.24 kg blob of clay is thrown at a wall with an initial velocity of if the clay comes to a stop in what is the average force experienced by the clay?
The - 60.6 N is the average force experienced by the clay.
Define average force.The force applied by a body moving at a constant velocity (rate of speed) over a fixed time period is known as the average force. The magnitude and direction of force are both vector quantities. The term 'average' denotes that this velocity was not precisely measured or was not 'instantaneous.' As a result, the average force over a given time period is equal to the body's mass multiplied by its average velocity. The magnitude and direction of the average force are both vector quantities.
Average acceleration = Δv/t
We know F = ma,
We have m = 0.24
Δv = Final velocity - Initial velocity
Δv = (0 - 23) m/s
Δv = -23 m/s
t = 91 ms or 0.91 s
As we know acceleration (a) = v/t
So, a = -23/0.91
a = - 25.27 m/s²
Put the above value in formula F = ma.
F = (0.24 kg) × (-25.27 m/s²)
F = - 60.6 N
Therefore, the average force experienced by the clay is - 60.6 N.
To know more about average force, visit:
https://brainly.com/question/16344573
#SPJ4
The complete question is:
"A 0.24 kg blob of clay is thrown at a wall with an initial velocity of 23 m/s. the clay comes to a stop against the wall in 91 ms, what is the average force experienced by the clay"
A baseball is thrown at a speed of Vo at an angle of elevation θ. Determine its range (R) in terms of Vo and θ.
The range of baseball thrown at a speed of Vo at an angle of elevation theta is Vo^2sin2theta/g.
What is range and how it comes out to be so ?See we have already studied about projectile in so many instances and in our earlier classes also.Projectile is simply a thing or an object thrown at a speed by the means of external force under the influence of gravity.Range is the maximum height that can be attained by the projectile , that is thrown up.We can also sometimes depict it as the horizontal displacement of the projectile.Whenever we throw a baseball up at sky , there is a launch point , the distance between the launch point and the end point is range.To know more about range visit:
https://brainly.com/question/17016688
#SPJ13
Classify each model A-D as either an element, a compound, or a mixture. Explain your reasoning for each answer
Answer:
a
Explanation:
you have a motor with a shaft diameter of 25 mm from which you have hung a weight of 1.1 kg on a thin wire. (assume that the mass of the wire mass is very small compared to that of the weight.) what is the torque on the motor’s shaft?
The torque on the motor's shaft is 1.375 Nm.
We need to know about torque to solve this problem. Torque is the rotational equivalent of linear force. It can be determined as
τ = F x r
where τ is torque, F is perpendicular force and r is radius.
From the question above, the parameter given are
m = 1.1 kg
d = 25 cm
r = 12.5 cm
Convert radius to meter
r = 12.5 cm
r = 12.5 x 10¯² m = 0.125 m
Find the weight
W = m . g
W = 1.1 . 10
W = 11 N
By substituting the parameters, we get
τ = F x r
τ = 11 x 0.125
τ = 1.375 Nm
Hence, the moment applied is 1.375 Nm
Find more on torque at: https://brainly.com/question/14839816
#SPJ4
A student designed an experiment to test the hypothesis that even very cold objects like ice contain heat . The student obtained liquid air , at a temperature of 200 , stored in a thermally insulated Under the supervision of the teacher , the student immersed a block of ice at a temperature of 12 C in the liquid air The temperature of the ice was measured over time What is the expected result of the experiment and why ? A The ice will become colder because the extreme difference in temperature will cause the particles of ice to slow down and increase in temperature B The liquid air will boil because the extreme difference in temperature will cause heat to be transferred from the ice to the liquid air and the molecules of the liquid air will begin to leave the liquid The ice will become warmer because the extreme difference in temperature will cause the particles of ice to gain kinetic energy , speed up and increase in temperature D The liquid air will freeze because the extreme difference in temperature will cause heat to be transferred to the ice and the molecules of the liquid air will move
The expected result of the experiment is that the liquid air will boil because the extreme difference in temperature will cause heat to be transferred from the ice to the liquid air ( B ).
The temperature of the liquid air = - 200 °C
The temperature of the block of ice = - 12 °C
Since they are in a thermally insulated flask, the heat will be transferred until both the objects' temperature becomes equal. So the temperature of liquid air rises and the temperature of ice decreases. The boiling point of liquid air is - 194.35 °C. So the liquid air boils.
Option A would have been correct if the final statement was decrease in temperature and not increase in temperature. Option C is incorrect because the ice becomes colder. Option D is incorrect because liquid air will boil.
Therefore, the expected result of the experiment is that the liquid air will boil because the extreme difference in temperature will cause heat to be transferred from the ice to the liquid air and the molecules of the liquid air will begin to leave the liquid ( B ).
To know more about heat transfer
https://brainly.com/question/15832606
#SPJ1
blue - lead car
black- following car
If the lead car breaks before the other car, will it crash?
Explain the features of the graph.
How we read the two colors
What the areas tell us
What the slopes tell us
How the graph is answering that question.
how high a hill can a car coast up (engine disengaged) if friction is negligible and its initial speed is 24.4 m/s? m (b) if, in actuality, a 750 kg car with the same initial speed is observed to coast up a hill to a height 14.3 m above its starting point, how much thermal energy was generated by friction?
The car can coast up to the height of 30.34m and (b) the thermal energy generated by friction is 118047.75J.
What is Kinetic energy?The energy in which an object that has as a result of motion is called as kinetic energy. A force is applied to an object in instruct to accelerate it. We have to put the effort in order to apply the force. After the completion of the work the energy is removed from the item and then it moves at a new, constant speed.
What is Potential energy?Potential energy is defined as the form of stored energy which is dependent on the ordering of system components.
(a) given; [tex]v=24.4m/s^{2}[/tex], [tex]g=9.81m/s^{2}[/tex]
KE(initial)= PE(final)
[tex]\frac{1}{2} mv^{2}[/tex]=[tex]mgh[/tex]
[tex]h=\frac{v^{2} }{2g}[/tex]
[tex]h=\frac{24.4^{2} }{2*9.81}[/tex]
h=30.34m
(b) If, in actuality, a 750 kg car with the same initial speed is observed to coast up a hill to a height 14.3 m above its starting point
E(friction)=KE(initial)-PE(final)
E(friction)=[tex]\frac{1}{2} mv^{2}-mgH[/tex]
E(friction) =[tex]\frac{1}{2}(750)24.4^{2} - (750)(9.81)(14.3)\\[/tex]
E(friction)=118047.75J
What is friction?A friction is defined as the force which prevents two objects from moving against each other.
Learn more about friction
https://brainly.com/question/13357196
#SPJ4
What do you guys think is the singularity?
A singularity is a point where some property is infinite.
What is meant by singularity?In technology, singularity describes a hypothetical future where technology growth is out of control and irreversible. Most especially, the singularity would require computer programs to become so advanced that artificial intelligence transcends human intelligence, potentially rubbing out the boundary between humanity and computers. Nanotechnology is recognized as one of the key technologies that will make singularity a truth. The technological singularity or simply the singularity is a hypothetical future point in time at which technological growth becomes uncontrollable and irreversible, resulting in unforeseeable changes to human civilization.
So we can conclude that a point where something is infinite is known as a singularity.
Learn more about singularity here: https://brainly.com/question/18048455
#SPJ1
you are 9.0 m from the door of your bus, behind the bus, when it pulls away with an acceleration of 1.0 m/s2. you instantly start running toward the still-open door at 5.7 m/s.
a) It takes you 1.893s to reach the opened door and jump in.
b) The maximum time that you can wait before starting to run and still catch the bus is 1.27s
The time which the passenger can delay and still catch the bus must be less than this.
From the question:
Distance between the passenger and the door of the bus d = 9
Acceleration of the bus a¹ = 1.0m/s²
Speed of the passenger v = 5.7m/s
Time taken for you to catch up with the bus must occur at the exact position with the bus,
Let the position = y
The time taken for you to reach the point:
t = total speed/distance
t = y + 9/5.7 ..................... eqn 1
The time taken for the bus to reach the same point;
y = vt + 1/2at²
Initial velocity of the bus is zero
y = 0.5*(1)t²
y = t²/2
t = √2y .......................eqn 2
We solve eqn (1) and (2) together:
9 + y = 5.7 * √2y
81 + y² + 18y = 64.98y
y² - 46.98y + 81 = 0
y = 45.187m or 1.792m
Now we take the smallest distance: x=1.792 m
Time taken for both to reach this point: (put x in eq. (1))
t = 1.792+9/5.7
t = 1.893s
For the maximum waiting time we find have:
Relative acceleration, ar = -1m/s⁻²since the bus is moving away from the intended
The final relative velocity for the passenger to catch it, vr = 0m/s⁻¹
Using equation of motion:
s = 9 + 1/2 * (-1)t²
also the initial relative velocity:
vr = ur + ar.t
ur = 5.7 - t
and
vr² = ur² + 2ar.s
0² = (5.7 - 1)² - 2 * 1 * (9 - 0.5t²)
t = 1.27s
Here's the complete question:
You are 9.0 m from the door of your bus, behind the bus, when it pulls away with an acceleration of 1.0 m/s2. You instantly start running toward the still-open door at 5.7 m/s.
How long does it take for you to reach the open door and jump in?
What is the maximum time you can wait before starting to run and still catch the bus?
Learn more about calculating maximum time from:
https://brainly.com/question/14698468?referrer=searchResults
#SPJ4
what is the average speed of a car that moves 450 m in 25 s
Answer:
18m/s
Explanation:
Divide 450 into 25 to know how many m per second and it gives 18m per second