The temperature at which the gas could have zero volume is called absolute zero. It is a hypothetical condition where all the curves meet at a point at V= 0 and T becomes -273.15°C.
The plot of the volume of a sample of gas versus temperature at three different pressures is a graphical representation of the ideal gas law.
As the temperature of the gas sample increases, the pressure increases, and the volume of the gas sample increases as well.
However, the rate at which the volume of the gas sample increases is different at the three different pressures. At higher pressures, the volume increases more quickly than at lower pressures, indicating that the gas sample is more compressible at higher pressures.
This can be seen in the plot as the curves for the three different pressures diverge. Additionally, the plot also shows that the volume of the gas sample increases more quickly at higher temperatures.
This is because the kinetic energy of the gas molecules increases with temperature, allowing them to move more freely, thus increasing the volume of the gas sample.
To know more about ideal gas law, click here:
https://brainly.com/question/27870704
#SPJ4
propose a solution to decrease the total amount of chemical pesticides used in britain for agriculture.
What is genetic modified organisms?
genetically modified organism (GMO) is associate animal, plant, or germ whose DNA has been altered victimization gene-splicing techniques. For thousands of years, humans have used breeding ways to change organisms.
Many GMO crops are wont to create ingredients that Americans eat adore cornstarch, corn syrup, corn oil, soybean oil, canola oil, or coarse sugar. many contemporary fruit and vegetables are on the market in GMO varieties, together with potatoes, summer squash, apples, papayas, and pink pineapples
Hence solutions are:
The response proposes an answer such as the subsequent for decreasing the full quantity of chemical pesticides employed in United Kingdom of Great Britain and Northern Ireland for agriculture:
Use genetically changed organisms () that are designed for gadfly resistance. observe integrated pest-management techniques to regulate pests.
Hence use of Genetic modified organisms is solution.
To know more about Genetic modified organisms please visit:
https://brainly.com/question/21411587
#SPJ4
balance the equation representing the reaction between iron(iii) oxide, fe2o3, and carbon monoxide (co) to yield iron (fe) and carbon dioxide (co2). do not include the states of matter.
The balanced chemical equation for above chemical reaction is given as,
Fe₂O₃ + 3 CO → 2 Fe + 3 CO₂
There are several ways to balance a chemical equation. In this above case case, we will see the algebraic method.
The first step is of assigning a letter to each compound:
a Fe₂O₃ + b CO → c Fe + d CO₂
Then, we must write the balance equations for each atom, thus:
Fe: 2a = c
C: b = d
O: 3a + b = 2d
The last step is of assigning a value to a letter. For example, we will say that a is 1, and then find the values for the others letters,
Fe: 2a = c if a=1; c=2
O: 3a + b = 2d if a=1 → 3+b = 2d
As b = d → 3+d = 2d; 3 = 2d - d; 3=d and 3=b
Thus, the balanced equation is given as,
Fe₂O₃ + 3 CO → 2 Fe + 3 CO₂
Learn more about balanced chemical equation from the link given below.
https://brainly.com/question/3124478
#SPJ4
Identify the products in the reaction below: *
Fe₂O3 + 3CO →→2Fe + 3C0₂
O Fe203
O Fe203, CO
Fe, CO2
O CO2
h
Answer:
The products in the reaction are Fe and CO2. Fe2O3, also known as iron(III) oxide, reacts with CO to produce iron (Fe) and carbon dioxide (CO2). The CO and Fe2O3 are the reactants in the reaction.
Explanation:
In a chemical reaction, reactants are the substances that are combined to produce a new substance or substances. In this case, the reactants are Fe2O3 and CO, which are combined to form the products Fe and CO2. A product is the substance that is formed as a result of the chemical reaction. In this reaction, Fe and CO2 are the products.
The products of the reaction are Fe and CO2. Fe2O3, also known as iron(III) oxide, reacts with CO to make iron (Fe) and carbon dioxide (CO2). The CO and Fe2O3 are the reactants in the reaction. Therefore, option C is correct.
What is chemical reaction ?The term chemical reaction is defined as a process in which one or more substances, also called reactants, are converted to one or more different substances, called as products.
A chemical reaction rearranges the constituent atoms of the reactants to produce various products. The properties of the products differ from the properties of the reactants.
Reactants are the substances that combine in a chemical reaction to produce a new substance or substances. The reactants in this case are Fe2O3 and CO, which combine to form the products Fe and CO2. The substance formed as a result of the chemical reaction is referred to as a product. The products of this reaction are Fe and CO2.
Thus, option C is correct.
To learn more about the chemical reaction, follow the link;
https://brainly.com/question/29762834
#SPJ2
write the word equation for reactions 3 and 4, using ammonium carbonate, calcium carbonate, and hydrochloric acid.
With ammonia bicarbonate, calcium, and hydrochloric acid, the word equation for processes 3 and 4 is. 2NH4Cl + H2O + CO2 = 2HCl + (NH4)2CO3.
What takes place when calcium carbonate and hydrochloric acid interact?Chloride, carbon dioxide gas, and water are the byproducts of the reaction between calcium and hydrochloric acid. The unbalanced equation reads like this.
What happens when hydrogen ions and carbonate react chemically?When its hydrogen ion interacts with the carbonate ions, carbonic acid is created. However, because carbonic acid is very unstable at standard atmospheric pressure and breaks down into both water and carbon dioxide, carbonate drinks release gas when they are opened. The metal ions then undergo a reaction with the chloride ions to create salts.
To know more about hydrochloric visit:
https://brainly.com/question/14006357
#SPJ4
because of the difference in molar masses, any particle of gas a will be moving slower than any particle of gas b at the same temperature. True or False
True : Because of the difference in molar masses, any particle of gas a will be moving slower than any particle of gas b at the same temperature.
The molar mass of a chemical compound is determined in chemistry by dividing the mass of a sample of that compound by the quantity of that compound, which is the number of moles in that sample, measured in moles. A substance's molar mass is a bulk attribute rather than a molecular one. The compound's molar mass is an average over multiple samples, each of which will likely have a different mass because of the existence of isotopes. The molar mass is most frequently calculated from the standard atomic weights, making it a terrestrial average and a function of the relative abundance of the constituent atoms' isotopes on Earth. For converting between the mass of a material and the amount of a substance for bulk amounts, use the molar mass.
To learn more about molar Mass Please click on the given link:
https://brainly.com/question/21334167
#SPJ4
Which Ocean currents are mostly affecting container ships?
Answer:
Ocean currents can affect the movement of ships in different ways, depending on the direction and strength of the current. In general, the most important ocean currents for container ships are the warm, eastward-flowing currents and the cold, westward-flowing currents. These currents are important because they affect the speed and direction of ships as they travel across the ocean. Some of the major ocean currents that are known to affect container ships include the Gulf Stream, the Kuroshio Current, and the Humboldt Current. These currents can have a significant impact on the route and speed of container ships, and ship operators must take them into account when planning their journeys.
Explanation:
For each of the following categories of compounds, indicate the type of liquid chromatography that could be used to separate analytes in that category. (Drag the appropriate chromatography label to the blank next to the category. Only one label applies to each category, but a label may be used more than once).
Seperation Mode Analyte Category
Fm>2000,soluble in octane,size10 nm
Fm>2000, soluble in butanol, size 100 nm
Fm>2000, soluble in water,nonionic,size 10 nm
Fm<2000, soluble in in ethanol
Fm<2000 , soluble in water, ion-paired
Fm<2000, soluble in water, ionic
Choices:
ion -exchange
Bonded-reverse phase
Adsorption
Bonded normal phase
Molecular exculsion
The appropriate types of chromatography for the labels are:
Fm>2000, octane soluble, size 10 nm: Bonded normal phase
Fm>2000, butanol soluble, size 100 nm: Bonded normal phase
Fm>2000, water soluble, non-ionic, size 10 nm: Adsorption
Fm<2000, ethanol soluble: Bonded reverse phase
Fm<2000, water soluble, ion paired: Ion exchange
Fm<2000, water soluble, ionic: Ion exchange
Liquid chromatography is a separation technique that uses liquid stationary and mobile phases to separate and purify compounds. There are many different types of liquid chromatography, each with different stationary phases and separation mechanisms.
In ion-exchange chromatography, the stationary phase consists of ionizable groups that interact with ions in the mobile phase. This type of chromatography is used to separate charged molecules such as ions and ion-pair compounds.
In adsorption chromatography, the stationary phase consists of solid adsorbents like Silica or alumina that interacts with the analyte via van der Waals forces, dipole-dipole interactions, or hydrogen bonding. This type of chromatography is used to separate compounds based on their affinity for the stationary phase.
In normal-phase chromatography, the stationary phase is a non-polar material such as silica or alumina, and the mobile phase is a polar solvent such as water or methanol. This type of chromatography is used to separate non-polar compounds based on their affinity for the stationary phase.
In reversed-phase chromatography, the stationary phase is a polar material such as octadecyl silica or cyanide-bonded silica, and the mobile phase is a non-polar solvent such as hexane or methylene chloride. This type of chromatography is used to separate polar compounds based on their affinity with the stationary phase.
Molecular exclusion chromatography, also called size exclusion chromatography, is a type of chromatography that separates molecules based on their size. The stationary phase consists of porous spheres with different pore sizes, and molecules are separated based on their ability to penetrate the pores. This type of chromatography is used to separate molecules with molecular weights greater than 2,000 Daltons.
Read more about solubility at:
brainly.com/question/18114882
#SPJ4
A zinc sample (work function is 4.3 eV) is struc k by light at 200 nm. What happens if the intensity of the light is tripled O The number of ejected electrons is tripled O The kinetic energy of the ejected electrons is tripled O The number of ejected electrons decreases by 1/3 O No change is observed because light at 200 nm is not enough to cause electrons to be ejected O The kinetic energy of the ejected electrons decreases by 1/3
If the intensity of the light is tripled, then the number of ejected electrons decreases by 1/3.
The energy E of a photon is equal to hv = hc/λ, where v is the frequency of the electromagnetic radiation and λ is its wavelength.
The given parameter is:
lambda = 2*10^-7 m
E = h*c/lambda
=(6.626*10^-34 J.s)*(3.0*10^8 m/s)/(2*10^-7 m)
= 9.939*10^-19 J
E = 9.939*10^-19 J
= 9.939*10^-19/(1.602*10^-19) eV
= 6.204 eV
Since, this is more than 4.3 eV, electron will be ejected.
To learn more about electromagnetic radiation check the link below:
https://brainly.com/question/1408043
#SPJ4
an alkene reacts with a strong protic acid to form a carbocation. in part 1 draw the curved arrow notation for the reaction between an alkene and hcl. however, an alkene will react with a halogen electrophile to form a cyclic intermediate. in part 2 draw the curved arrow notation for the reaction between an alkene and cl2.
When 1-propene and HBr are combined in the first reaction, an ionic mechanism drives the production of 2-bromo propane. When 1-propene and a bromine molecule interact for the second time.
Are bases and alkenes compatible?Most often, molecules with excellent leaving groups connected to sp3 carbons are eliminated processes to produce alkenes. Examples of these reactions are the dehydrohalogenations with strong bases and the alcohol dehydrations catalyzed by acids.
How do alkenes typically respond?Although alkenes can react in many different ways, electrophilic addition reactions are by far the most frequent. In an addition reaction, two smaller molecules are combined to form one larger molecule.
To know more about alkenes visit:-
https://brainly.com/question/13910028
#SPJ4
which of the following characteristics best determines the composition of the initial filtrate produced in the nephron? group of answer choices only water enters the nephron only large molecules enter the nephron only small molecules enter the nephron only wastes enter the nephron all molecules freely enter the nephron
Characteristics best determines the composition of the initial filtrate produced in the nephron Only small molecules enter the nephron.
The filtrate produced by the glomerulus moves directly from the glomerulus to Bowman's capsule. The filtrate contains some small molecules present in the blood. So, in addition to waste products, there are nutrient molecules and water, which are also removed by the nephron as filtrate.
Small molecules can pass through the intercellular space of the glomerulus and Bowman's capsule. These small molecules can pass through as filtrate, and some specific molecules within them are reabsorbed by the body as they are required for specific bodily functions.
Internal filtrate molecules are made up of these chemical elements in the body, only the larger molecules from the blood cannot enter the system.
Learn more about nephron here : https://brainly.com/question/242658
#SPJ4
5. Use the following chemical equations to answer the questions below.
Mg(s) + AgNO3(aq) ->Ag(s) + Mg(NO3)2
Na₂SO4 (aq) + BaCl₂(aq) –>
BaSO4(s) + NaCl(aq)
a) Identify each type of reaction.
b) Write the balanced chemical equation
for each.
The reaction: Mg(s) + 2AgNO₃(aq) → Mg(NO₃)₂(aq) + 2Ag(s) it represents the single replacement reaction.
Na₂SO4 (aq) + BaCl₂(aq) → BaSO₄(s) + 2NaCl(aq) it represents the Double displacement reaction.
What is single replacement reaction and double displacement reaction?A simple exchange reaction is one in which a more reactive element displaces a less reactive element from brine. Compared to silver, magnesium easily loses electrons, leading to the formation of magnesium nitrate and silver.
A double displacement reaction is a chemical reaction in which ion exchange occurs. Na₂SO₄ reacts with BaCl₂ to produce BaSO₄ and sodium chloride.
The balanced equation becomes:
Mg(s) + 2AgNO₃(aq) → Mg(NO₃)₂(aq) + 2Ag(s)
Na₂SO4 (aq) + BaCl₂(aq) → BaSO₄(s) + 2NaCl(aq)
To know more about single replacement reaction, refer to:
https://brainly.com/question/13903783
#SPJ1
Write the formula of the conjugate base of the Brønsted-Lowry acid, HBrO₂
Considering the Brønsted–Lowry theory, the conjugate base of HBrO₂ is BrO₂⁻.
Brønsted–Lowry theoryA Brønsted-Lowry acid is any species capable of donating a proton (H⁺).
A Brönsted-Lowry base is a substance capable of gaining or accepting a proton (H⁺).
Then a proton transfer occurs that requires the presence of a proton donor, that is, an acid and a base that accepts them.
When an acid donates H+, the species that remains is called the conjugate base of the acid because it reacts as a proton acceptor in the reverse reaction. Likewise, when a base accepts H+, it becomes its conjugate acid.
Conjugate base of HBrO₂Considering the definition of conjugate base, the conjugate base of HBrO₂ will be BrO₂⁻ because the Brønsted-Lowry acid, HBrO₂, donates an H⁺.
Learn more about conjugate base:
brainly.com/question/21332683
brainly.com/question/29720620
brainly.com/question/21332738
brainly.com/question/14954088
#SPJ1
which of the following must be used to protect dental personnel from the occupational risks of nitrous oxide by reducing the n2o released into the treatment room?
For more than 150 years, nitrous oxide has been used as a clinical anesthetic. When combined with an anesthetic gas scavenging system, an efficient room heating, ventilation, and air conditioning system.
This Alert provides control strategies for preventing or significantly reducing N2O exposure during anesthetic gas administration. The danger of anesthetic toxicity has been proven to be decreased by epinephrine's ability to prolong sensory nerve blockage and delay local anesthetics' absorption into the body. In some circumstances, additions like tramadol, buprenorphine, dexamethasone, and clonidine seem to work well. N2O is employed as an anesthetic agent* in veterinary, medical, and dental operating rooms. Additionally, this gas is used to nitrate alkali metals, oxidize organic molecules, and foam whipped cream.
to know more about nitrous oxide please visit.
https://brainly.com/question/9835041
#SPJ4
FILL IN THE BLANK. When blood sodium (Na) is too low or blood potassium (K) is too high, the hormone __________ is released by the zona glomerulosa
When blood sodium (Na) is too low or blood potassium (K) is too high, the hormone aldosterone is released by the zona glomerulosa.
Aldosterone is produced exclusively in the globular zone under specific regulatory pathways. This steroid hormone plays an important role in maintaining water volume sodium and potassium balance and regulates blood pressure.
Aldosterone is a mineralocorticoid hormone that plays a central role in regulating blood pressure and sodium and potassium levels in the blood. Above each kidney is an adrenal gland. Like many glands, the adrenal gland works in conjunction with the hypothalamus and pituitary gland. The adrenal glands produce and release corticosteroid hormones and epinephrine that maintain blood pressure and regulate metabolism.
Learn more about The hormone here:- https://brainly.com/question/8162998
#SPJ4
Choose the pair of substances that are most likely to form a homogeneous solution.? a. CCl4 and SCl2 b. NF3 and SO2 c. CO and C6H6 d. NH2CH3 and CH4 e. None of thesse pairs will form a homogeneous solution.
Among the given options, the pair that is most likely to form homogenous solution is NF₃ and SO₂.
A homogenous solution is a solution that has a uniform distribution of the particles all over the solution.
Basically, to be a homogenous solution, both the solute and the solvent has to be in the same state and both of the has to be of the same nature i.e. Polar or Non-Polar.
Among the given options are CCl₄ and SCl₂, NF₃ and SO₂, CO and C₆H₆, NH₂CH₃ and CH₄.
Only the pair of NF₃ and SO₂ are polar and found in same state at room temperature.
So, NF₃ and SO₂ are most likely to form a Homogenous solution.
To know more about Homogenous solution, visit,
https://brainly.com/question/14441492
#SPJ4
0.175 moles of aluminum nitrate reacted with a sufficient amount of copper sulfate to produce how many moles of copper nitrate
Copper metal has a mole weight of 0.45 moles. the complementary interaction of copper and aluminum. 0.45 moles of copper nitrate.
Sodium is created when sodium chloride and silver nitrate combine. Next, we must determine how many moles of each reactant there are. This molarity concentration unit connects moles of solute to volume of solution. Chemical processes are expressed in terms of moles of reactants and products. Aluminum oxide is created when aluminum and oxygen react. The lowest set of whole number coefficients in a balanced equation.
to know more about copper nitrate please visit.
https://brainly.com/question/12768349
#SPJ4
A student determines the value of the equilibrium constant to be 6.54×103 for the following reaction. CO(g) + H2O(l)CO2(g) + H2(g) Based on this value of Keq: G° for this reaction is expected to be (greater, less) than zero. Calculate the free energy change for the reaction of 2.32 moles of CO(g) at standard conditions at 298K. G°rxn = kJ
A. Co + H₂O ⇄ co₂+ H₂
= -8.314[tex]\frac{J}{K.mol}[/tex] x298k x In (6.54x16³)
= -21.77 kJ/m0/
for 2.32 molco, A = -21.77×2-32
= -50.51kj/mol
B. Fe₂03(5) +3H₂(9) ⇄ 2 Fe(s) + 3H₂0(9)
= -8.314 × 298x/n (2.47x10⁻¹⁰)
= +54.807 kJ/mol
for 1.61 mol fe₂03, Δ4= 54.807 X 1.61 mol
= 88.24 kJ/mol.
Equilibrium constant numbers are obtained by allowing a single reaction to reach equilibrium and measuring the concentrations of each substance involved in the reaction. The ratio of product concentration to educt concentration is calculated. A mathematical ratio indicating product concentration divided by reactant concentration.
Learn more about Equilibrium constants here:- https://brainly.com/question/3159758
#SPJ4
9. Which of the following best explains why a hot air balloon rises and floats in air?
A. Air particles inside the balloon are farther apart, causing its density to be higher than the density of air outside the balloon.
B. Air particles inside the balloon are farther apart causing its density to be less than the density of air outside the balloon.
C. Air particles inside the balloon are closer together, causing its density to be higher than the density of the air outside the balloon.
D. Air particles inside the balloon are closer together, causing its density to be lower than the density of the air outside the balloon.
commercial antacids contain a wide variety of basic substances as their active ingredient, including .
Commercial antacids contain a wide variety of basic substances as their active ingredient, including calcium, magnesium, and aluminium salts.
What are Antacids?
Antacids are medications that counteract (neutralise) your stomach's acid to ease heartburn and indigestion. They are available without a prescription from pharmacies and stores and come in liquid or chewable tablet form. Gel composed of aluminium hydroxide is an example of an antacid.
What should you take as a natural antacid?
A natural antacid is baking soda, sometimes referred to as sodium bicarbonate. A teaspoon of baking soda dissolved in 8 ounces of water can be consumed to briefly reduce heartburn and neutralise stomach acid.
To know more about antacids, click here- brainly.com/question/5328009
#SPJ1
Commercial antacids contain a wide variety of basic substances as their active ingredient, including calcium, magnesium, and aluminium salts.
What are Antacids?Antacids are medications that counteract (neutralise) your stomach's acid to ease heartburn and indigestion. They are available without a prescription from pharmacies and stores and come in liquid or chewable tablet form. Gel composed of aluminium hydroxide is an example of an antacid.
What should you take as a natural antacid?A natural antacid is baking soda, sometimes referred to as sodium bicarbonate. A teaspoon of baking soda dissolved in 8 ounces of water can be consumed to briefly reduce heartburn and neutralise stomach acid.
To know more about antacids, click here-
brainly.com/question/5328009
#SPJ1
List the following transition metal cations by their d electron count, with the highest at the top and the lowest at the bottom. 1. Zn2+ 2. Co2+ 3. Ru4+ 4. Mo4+ 5. Pt2+.
The transition metal cations by their d electron count, with the highest at the top and the lowest at the bottom is A > E > B > C > D.
D8 Metals was founded in 2004 as a company specializing in aluminum and steel fabrication, architectural metals and claddings, and custom electromechanical projects. Instead of an 8-electron rule or octet, transition metals follow an 18-electron rule. The easiest way to count electrons is to break down the complex and count the electrons apart.
There are 40 elements in the d block of the periodic table. Four rows of transition elements make up the d block. The d-electron number is a chemical formalism used to describe the electronic configuration of the valence electrons of the transition metal centers of coordination complexes. The d electron number is an effective way to understand the shape and reactivity of transition metal complexes.
Learn more about Electron here:- https://brainly.com/question/14077813
#SPJ4
the fundamental particles of matter are:atoms and molecules. quarks and leptons. electrons, protons, and neutrons.
Quarks and leptons are considered fundamental particles of matter. Therefore, option 2 is correct.
An elementary particle, also known as a fundamental particle, is a subatomic particle that is not connected to any other particle. Leptons and quarks are two significant elementary particles. There are six different types of quarks and leptons as well as three generations of matter. Protons and neutrons, on the other hand, are no longer regarded as fundamental particles. Instead, it is now thought that they are composed of smaller, more fundamental particles of matter, known as quarks. Leptons are elementary particles because they don't seem to be made of any other subatomic particles. Leptons can exist in two states: neutral or charged with one unit of electricity. The electrons, muons, and taus are considered charged leptons.
To know more about leptons and quarks:
https://brainly.com/question/28976786
#SPJ4
Answer: What is an Atom? The answer is the fundamental unit of matter
Explanation: EDG2023
out of the following elements which has the 3s orbital furthest from the nucleus? bromine selenium arsenic germanium all the same
Bromine, selenium, arsenic, germanium has 4 shells around the nucleus.
What is the periodic table?The chemical elements are arranged in rows and columns in the periodic table, which is also known as the periodic table of the (chemical) elements.
It is commonly regarded as an icon of chemistry and is utilized extensively in physics, chemistry, and other sciences.
The periodic law, which asserts properties of chemical elements display a roughly periodic dependency on their atomic numbers, is graphically expressed in this way.
Four blocks, or roughly rectangular sections, make up the table. Periods and groups are the names of the table's rows and columns, respectively.
The chemical properties of elements in the same group on the periodic table are similar. The periodic table shows trends, with the proportion of non-metallic elements rising from left to right over time.
To know more about periodic table, visit:-
https://brainly.com/question/11155928
#SPJ4
the 1995 nobel prize in chemistry was shared by paul crutzen, f. sherwood rowland, and mario molina for their work concerning the formation and decomposition of ozone in the stratosphere. rowland and molina hypothesized that chlorofluorocarbons (cfcs) in the stratosphere break down upon exposure to uv radiation, producing chlorine atoms. chlorine was previously identified as a catalyst in the breakdown of ozone into oxygen gas. using the enthalpy of reaction for two reactions with ozone, determine the enthalpy of reaction for the reaction of chlorine with ozone. Using the enthalpy of reaction for two reactions with ozone, determine the enthalpy of reaction for the reaction of chlorine with ozone. ClO(g) + O3(g) rightarrow Cl(g) + 2Oz(g) deltaH = -122.8 kJ/mol 2O3(g) rightarrow 3O2(g) deltaH =--285.3 kJ/mol O3(g) + Cl(g) rightarrow ClO(g) + O2(g) deltaH = ?
The bond enthalpy of the bond formed between chlorine and ozone is the 122.8 kJ
Definition of Hess's Law,
Hess's law states that the "increase in enthalpy in a chemical reaction i.e., reaction heat at constant pressure is independent of the process between the initial and final states".
Inverse equation (1): Cl (g) + 2O₂ (g) → Cl) (g) + O₃ (g) ∆H = +122.8 kJ / mol (NOTE: change in sign of ∆H)
Copy equation (2): 2O₃ (g) → 3O₂ (g) ∆H = -285.3 kJ / mol
Adding the 2 equations we get:
2O₃ (g) + Cl (g) + 2O₂ (g) → Cl (g) + O₃ (g) + 3O₂(g) and cancel common species.
Learn more about Hess's law from the link given below.
https://brainly.com/question/13539390
#SPJ4
if an antacid tablet weighed 1.6 grams, how many moles of gastric acid (hci) would it neutralize? use the results obtained in data tables 1 and 2 to explain and quantify your answer.
If Antacid tablet weighed 1.6 grams the 0.015 moles of gastric acid will neutralized.
Antacids neutralize the gastric acid in stomach by stopping an enzyme that creates acid to break down food for digestion. The antacids act by neutralizing the acid in the stomach and by inhibiting pepsin which is a proteolytic enzyme.
1 gram Antacid neutralized HCL = 0.342 gram
This is calculated from the expression for equivalence point in the titration.
1.6 gram Antacid neutralized HCL is,
( 0.342gram HCL/ 1 gram antacid ) . 1.6 gram antacid
= 0.5472 gram
Molar mass of HCL = 36.5 gram
Moles of HCL = 0.5472 gram / 36.5 gram = 0.01499
so, the moles of HCL is 0.015 mole.
To learn more about Neutralizing Antacids please visit:
https://brainly.com/question/5328009
#SPJ4
transition metal ions regulated oxygen evolution reaction performance of ni-based hydroxides hierarchical nanoarrays
True , transition metal ions regulated oxygen evolution reaction performance of ni-based hydroxides hierarchical nanoarrays.
Transition metals are part of the d block, which means that the d sublevel of electrons is being filled with up to ten electrons. Many transition metals are incapable of losing enough electrons to achieve the noble-gas electron configuration. Ions are formed when transition metals lose s electrons. Transition metals produce a variety of ions with varying charges. The electrons in the's' orbital have more energy than the electrons in the 'd' orbital. As a result, removing those two electrons becomes much easier. As a result, the transition metal can easily form ions with a +2 charge.
Learn more about Transition metals here:
https://brainly.com/question/29828769
#SPJ4
When nitrogen-14 is bombarded with an alpha particle, a proton ( ) is ejected and a new nuclide is formed. Balance the equation and identify the nuclide formed.
When nitrogen-14 is bombarded with an alpha particle, a proton is ejected and oxygen is formed.
Equation of the reaction is :
₇N + ₂alpha particle → ₁P + ᵃX
Balance the atomic number of the equation:
7 + 2 = 1 + a
a = 8
Balance the atomic mass of the equation:
14 + 4 = 1 + b
b = 17
So, the element with atomic number 8 is oxygen and its mass is 17.
Alpha particle, also referred to as alpha rays or alpha radiation, encompass protons and neutrons bound collectively into a particle same to a helium-4 nucleus. they're generally produced within the technique of alpha decay, but will also be produced in other approaches.
Learn more about alpha particle here:- https://brainly.com/question/1621903
#SPJ4
HELP PLEASE
Draw the atomic structure (nucleus and electron orbitals) for the following atoms and label the valence electrons in each sodium chlorine carbon
The atomic structure for the following atoms is attached below and number of valence electrons in sodium, chlorine,carbon are 1,7,4 respectively.
What is an atom?An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.
The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.
Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.
Learn more about atom,here:
https://brainly.com/question/13654549
#SPJ1
a solution of the chloride salt, hbcl, of the weak base b will have a. a ph less than 7 b. greater than 7 c. equal to 7
Strong bases and weak acids can hydrolyze into salts, raising the pH level over 7. Ammonium chloride (NH 4 Cl) is a salt whose solution has a pH of less than 7.
The pH will be less than seven when the solution is acidic and higher than seven when the solution is basic. Because Na2CO3 is a salt comprising a strong base and a weak acid, it will produce the highest pH in water. The pH scale determines how acidic or basic water is. The range is 0 to 14, with 7 representing neutrality. Acidity is indicated by pH values below 7, whereas baseness is shown by pH values above 7. In reality, pH is a measurement of the proportion of free hydrogen and hydroxyl ions in water.
to know more about pH of less than 7 please visit.
https://brainly.com/question/10063793
#SPJ4
How many grams are in 0.500 mol Co?
For parts of the free-response question that require calculations, clearly show the method used and the steps involved in arriving at your answers. You must show your work to receive credit for your answer. Examples and equations may be included in your answers where appropriate. HCl(aq) + NaOH(aq) + NaCl(aq) + H20(1)A student was given the task of titrating a 20.mL sample of 0.10MHCl(aq) with 0.10MNaOH(aq) . The HCl(aq) was placed in an Erlenmeyer flask. An equation for the reaction that occurs during the titration is given above.(a) According to the equation for the reaction, if the amount of the reactants is halved, how does this affect the amount of H20(1) produced in the reaction?(b) The equation above is not written in net ionic form. Write the correct net ionic equation for the reaction.
a) If the amount of reactants (NaOH and HCl) is halved then the water produced in the reaction is also halved.
b) The net ionic equation for the reaction can be written as:
H⁺ (aq) + OH⁻ (aq) → H₂O (l)
What are the net ionic equations?The net ionic equation of a reaction can be described as an equation that represents in terms only those elements, ions, or compounds, that directly contributed to the reaction.
We can write a chemical equation for the reaction of HCl and NaOH:
HCl(aq) + NaOH (aq) → NaCl (aq) + H₂O (l)
The complete ionic equation of the given reaction is can be written for the above reaction is:
H⁺ (aq) + Cl⁻ (aq) + Na⁺ (aq) + OH⁻ (aq) → Cl⁻ (aq) + Na⁺ (aq) + H₂O (l)
In the ionic equation, the Na⁺ and Cl⁻ ions appear unchanged on both sides of the equation. When we mix the two solutions, neither the Na⁺ nor Cl⁻ ions participate in the reaction. So Na⁺ and Cl⁻ ions can be eliminated from the complete ionic equation.
H⁺ (aq) + OH⁻ (aq) → H₂O (l)
Learn more about the net ionic equation, here:
brainly.com/question/15466794
#SPJ1