Answer:This is a very interesting question. I think of it like this. You have a piece off ice floating in the water. Let's say a portion off. It is submerged. No. If this the portion off the sub marched portion has a volume be, it means that the buoyant force will be times the density off water times G. Now this will be equal to the point force, which is equal to the weight off the ice block. Now, once I this ice turns into water, it will still have the same rate. But now its density will be equal to that of water. So it's wait will be saying mass times G. Now you can cancel T on mass is equal to three times rope. Now, this week is this volume and if you notice, row is also the density of water, which means this mass of water contains will help this volume. It means once the ice becomes water, it perfectly fits into this volume, which means the water level's stays exactly the same. It's almost magical, but what happens if there isn't a butt in a bubble? You can think off it in a slightly mathematical way, If you have an air bubble in on Ice Cube, it's total density. Its average density will be less than the density off ice, but an easier way to think about it is like this. You have a piece off ice, which has in a bubble in it on dhe, obviously that it's water here and now. Once the ice melt, the amount of water displaced will be. The volume of the water displaced will equal the weight off the ice. So the what? The water in the ice, if it's exactly in this volume, so it must still be the same. But the answer will be different if you have a great off sandal. If you have a grain of sand, let's say somewhere over here the total density off the ice cube will be larger. The average density on once the ice melt the sand simply false down, which means this ice this piece off ice was further down than it for the lower in the water than it would have been if it was simply made off ice. So to make up for that, when the ice melts, the amount off the volume off the water will be less than the amount of water displaced, so the level of water will decrease if it were if there were a grain of sand in the ice, so you would expect that the water level would tries if, uh, in the case off the air bubble. But it's the identity of baby. It is so small that it simply doesn't count.
Explanation:
Need this answered immediately. 50 points.
Answer:
a
b
d
c
a
Explanation:
hope helpful pls give brainliest
Answer:
Hey if its up tomorrow I can I can’t rn sorry :(
Explanation:
What happens to the molecules of Nitrogen as it goes through deposition?
what is the difference between cyclic compound and straight chain compound in hydrocarbons reaction
Explanation:
Cyclic Hydrocarbons
A cyclic hydrocarbon is a hydrocarbon in which the carbon chain joins to itself in a ring. A cycloalkane is a cyclic hydrocarbon in which all of the carbon-carbon bonds are single bonds. Like other alkanes, cycloalkanes are saturated compounds. Cycloalkanes have the general formula CnH2nCnH2n. The simplest cycloalkane is cyclopropane, a three-carbon ring.
is it possible to convert molecule to molecule?
Answer:
yes, it's possible to covert molecule to molecule
Explanation:
Converting between molecules and moles is done by either multiplying by or dividing by Avogadro's number.
hope it helps.
plz mark me as brainliest
have a great day ahead
1) Is a moth bursting out of cocoon a chemical or physical change? (I put chemistry because i didn't know what else to put) 2) Is playing with purple and green slime chemical or physical change
Answer:
1)A moth bursting out of a cocoon is neither a chemical or physical change, it's a biological change. If I had to chose it would be a physical change though. Not to sure...
2)Playing with slime is a physical change.
Explanation:
1)The reason why I would chose physical change is because the moth is changing it's physical state more than it's chemical composition, but you should say both if that's an option.
2)A physical change is when the temperature, shape, or state of matter changes. A chemical change occurs when the actual substance changes. An example of this is a chemical reaction. Because the slime is changing shape and not substances, I would say that it's obviously a physical change.
Hope this helps, sorry that I'm not too sure about the 1st question.
One of the following species is not isoclectronic. A. PO4³-B. BrO4- C. H2SO4 D. XeF4 E. CCl4
Answer:
फ्य्फ्य्क्ज्य्य्क्सुग्किग्क्सिगिदित्फ
Which is a characteristic of an atom?
Atoms are the largest unit of matter.
Atoms can be seen by the naked eye.
Atoms come in different varieties.
Atoms are created in the Earth’s core.
Answer:
its atomic number
Explanation:
which is defined as the number of units of positive charge (protons) in the nucleus. For example, if an atom has a Z of 6, it is carbon, while a Z of 92 corresponds to uranium.
HELPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPP
Answer:
what the model is describing is the molecules. when molecules are tightly packed they form a solid like ice, and when the ice is melting forms a liquid because the molecules are spreading out. when the ice evaporates (gas) the molecules are moving about and are not touching eachother
what's is the most stable oxidation state for chromium and iron
Chromium exhibits a wide range of possible oxidation states, where the +3 state is the most stable energetically. The +3 and +6 states are the most commonly observed in chromium compounds, whereas the +1, +4 and +5 states are rare.
A chunk of sulfur has a volume of 8.33 cm3. What is the mass of this sulfur? (Density of sulfur = 2.07 g/cm3.)
Explanation:
equations to note:
density= mass/volume
mass= volume *density
volume= mass/density
you have a volume- 8.33cm3
you have a density- 2.07 g/cm3
Answer:
8.33cm3 * 2.07g/cm3= 17.24g
mass= 17.24g
What is the molarity of a solution that contains 114.4g NaCl (molar mass= 58.44 g/mol) in 1.2 L solution?
Answer:
1.6 M.
Explanation:
We want to find the molarity of a solution that contains 114.4 g NaCl in a 1.2 L solution.
Recall that molarity is given by:
[tex]\displaystyle \text{M} = \frac{\text{ mols solute}}{\text{ L soln.}}[/tex]
Convert 114.4 g NaCl to mol NaCl using its molecular weight:
[tex]\displaystyle 114.4 \text{ g NaCl} \cdot \frac{1 \text{ mol NaCl}}{58.44 \text{ g NaCl}} = 1.958\text{ mol NaCl}[/tex]
Therefore, the molarity of the solution will be:
[tex]\displaystyle \text{M} = \frac{1.958 \text{ mol NaCl}}{1.2\text{ L soln.}} = 1.6 \text{ M}[/tex]
In conclusion, the molarity of the solution is 1.6 M.
Imagine you are combining carbon and oxygen in a chemical reaction. If some of the carbon forms carbon monoxide instead of carbon dioxide, this would decrease the reaction's _____ of CO2.
A) total energy
B) C:O ratio
C) actual yield
D) theoretical yield
What did Fermi mean when he said, "The reaction is self-sustaining"?
The reaction reached critical mass.
A spontaneous chain reaction had been accomplished.
The nuclear reaction was out of control.
The nuclear reaction could be controlled and maintained.
Answer:
The nuclear reaction could be controlled and maintained.
Explanation:
People had initiated a self-sustaining nuclear reaction--and then stopped it. He had released the energy of the atom's nucleus and controlled that energy.
Fermi's achievement in setting off the first self-sustaining nuclear chain reaction from his design of an atomic pile led to a new Age of the Atom. The controlled release of nuclear energy was now a reality
What type of decay is illustrated by the equation below?
A. alpha decay
B. beta decay
C. positron emission
D. electron capture
B. beta decay
plz mark me as Brainliest
Answer:
Beta Decay (B)
How many molecules are there in 3.00
moes of NH₃
Now
No of molecules:
[tex]\\ \sf\longrightarrow No\:of\;moles\times Avagdro\:no)[/tex]
[tex]\\ \sf\longrightarrow 3(6.022\times 10^{23})[/tex]
[tex]\\ \sf\longrightarrow 18.066\times 10^{23}[/tex]
[tex]\\ \sf\longrightarrow 1.8066\times 10^{22} molecules [/tex]
Homeostasis in a constantly changing environment is a process known as
What is the periodic table?
Answer:
A Chart Of The Chemical Elements That Displays Them In Rows Horizontally In Order Of Increasing Atomic Number And Vertically According To Similarity Of The Chemical Properties Of Their Atoms.
when a candle burns both physical and chemical changes take place at identify these changes give another example of a familiar process in which both the chemical and physical changes takes place.
Answer:
So, the melting of wax and vapourisation of melted wax are physical changes. Chemical Changes : The wax near flame burns and gives new substances like carbon dioxide, carbon soot, water vapour, heat and light. LPG is another example of a familiar process in which both the chemical and physical changes take place.
please help!!!!!!! thank you :)
What state does a gas turn into if it reaches it freezing point?
O Solid
O Liquid
Gas
O None of the above
Answer:
Solid
Explanation:
According to Wikipedia
Deposition is the phase transition in which gas transforms into solid without passing through the liquid phase. Deposition is a thermodynamic process. The reverse of deposition is sublimation and hence sometimes deposition is called desublimation.
write insoluble or soluble solution for the following mixtores
1
2
3
4
5
Gasoline in water = insoluble
acetone in nail polished = soluble
salt in alcohol = soluble
oil in vinegar = insoluble
tawas in water = soluble...
Sorry if i am incorrect......
I want the C answer plss help meee
Answer:
Mark me as a Brainliest
Due to the fact that electrons are delocalized in graphite, it is a good conductor of electricity. Carbon atoms in graphite form hexagonal layers and are in covalent bonds with three other carbon atoms. Due to this non-bond electron configuration, each carbon atom conducts electricity in the form of a delocalized electron.
How many atoms of oxygen in the chemical formula 2Ca(ClO2)2?
Answer:
Calcium Nitrate is made up of three different elements and contains a total of nine atoms. This compound's formula is Ca(NO3)2. There is one calcium atom, two nitrogen atoms, and there are six oxygen atoms in calcium nitrate
3. A sample of gas has a volume of 364 mL at a temperature of 25 ᴼC. What will the volume be if the temperature is changed to 100 ᴼC while the pressure is kept constant?
Answer:
1027.9 mL, its easy
Explanation:
Calculate the volume of an object with a density of .85 g/mL and a mass of 212 g.
[tex]\\ \sf\longmapsto Volume=\dfrac{Mass}{Density}[/tex]
[tex]\\ \sf\longmapsto Volume=\dfrac{212}{0.85}[/tex]
[tex]\\ \sf\longmapsto Volume=249.4mL[/tex]
Answer:
[tex]249.41 \: ml[/tex]
Explanation:
[tex]volume = \frac{mass}{density} \\ = \frac{212g}{0.85 \: g \: {ml}^{ - 1} } \\ = 249.41 \: ml[/tex]
Hope this helps you.
Let me know if you have any other questions :-):-)
Which element is the most reactive?
Answer:
Cesium
Explanation:
Cesium is second from the bottom of this group, has 6 shells of electrons, and it matches the features of a reactive atom, making it the most reactive element.
how many grams of Zn are there in 0.54 mol of Zn
Answer:
35.3052 grams of zinc are there in 0.54 mol of zn.
PLEASE HELP!!!!! i give a lot of points!!!!
Answer:
I think it s the third one
BTW yw if it's correct
What is the mass grams that are in 1 molecule of H2?
C.5A What is the symbol of the atom shown below?*
8 points
8 electrons
8 protons
8 neutrons
N
c
..........................