the major high-speed network experimenting with long distance Ethernet over fiber is e. the National Lambda Rail.
NLR uses fiber-optic lines, and is the first transcontinental 10 Gigabit Ethernet network. Its high capacity (up to 1.6 Tbit/s aggregate), high bitrate (40 Gbit/s implemented; planning for 100 Gbit/s underway and high availability (99.99% or more), enable National LambdaRail to support demanding research projects. Users include NASA, the National Oceanic and Atmospheric Administration, Oak Ridge National Laboratory, and over 280 research universities and other laboratories. In 2009 National LambdaRail was selected to provide wide-area networking for U.S. laboratories participating in research related to the Large Hadron Collider project, based near Geneva, Switzerland.
It is primarily oriented to aid terascale computing efforts and to be used as a network testbed for experimentation with large-scale networks. National LambdaRail is a university-based and -owned initiative, in contrast with the Abilene Network and Internet2, which are university-corporate sponsorships. National LambdaRail does not impose any acceptable use policies on its users, in contrast to commercial networks. This gives researchers more control to use the network for these research projects. National LambdaRail also supports a production layer on its infrastructure.
learn more about Ethernet here:
https://brainly.com/question/14622272
#SPJ11
Question 14
Which one of the following was not initially associated with PCBs?
a. minimata disease
b. yusho disease
c. yu-cheng disease
d. chlorance
I'd be happy to help you with your question. The term not initially associated with PCBs (polychlorinated biphenyls) among the given options is:a. Minamata disease Minamata disease is caused by mercury poisoning, not PCB exposure.
The other options, Yusho disease and Yu-Cheng disease, are both associated with PCBs, and "chlorance" seems to be a typo or an irrelevant term.When polychlorinated biphenyls (PCBs) were first introduced, they were not initially associated with environmental pollution or health hazards. Instead, they were widely used in a variety of industrial and commercial applications due to their desirable physical and chemical properties. PCBs were used as coolants and lubricants in electrical equipment, hydraulic systems, and transformers.
Learn more about Minamata here
https://brainly.in/question/371959
#SPJ11
7. I use as multiple pages open and it isn't email which layer of the transmission control protocol or internet protocol TCP IP model is responsible for supporting the data to send email and web pages to the appropriate locations?A. ApplicationB. Data linkC. TransportD. Network
Based on your question, it sounds like you are asking which layer of the TCP/IP model is responsible for supporting the transmission of data for email and web pages, the layer responsible for this would be the: A) application.
This layer handles the communication protocols and interface between the applications and the network. Specifically, it is responsible for packaging the data into a format that can be sent over the network and ensuring that it is sent to the correct destination.
The data link layer (B) is responsible for the physical transmission of data over the network, while the transport layer (C) is responsible for ensuring the reliable delivery of data between applications. The network layer (D) is responsible for routing and forwarding data packets between networks.
So the correct answer is: A. Application.
Learn more about TCP/IP: https://brainly.com/question/14280351
#SPJ11
A PLC up-counter (CTU) counter counts:a. scan transitionsb. true-to-false transitions.c. false-to-true transitionsd. both b and c!
A PLC up-counter (CTU) is a counter that counts the number of events that occur in a process. The events can be anything from input signals to other process variables that change in a particular way. The CTU counter counts the events based on the number of transitions that occur in the process.
option d: both b and c
The transitions can be either from true-to-false or false-to-true, depending on the type of counter used. In the case of the up-counter (CTU), the counter counts the number of false-to-true transitions that occur in the process. This means that the counter increments each time a false signal changes to a true signal.The reason for counting false-to-true transitions is that it is the most common type of transition that occurs in most processes. This is because most processes have a default state of false, and it is only when an event occurs that the state changes to true.Therefore, the answer to the question is option d: both b and c. The CTU counter counts both true-to-false and false-to-true transitions, but for an up-counter, it is the false-to-true transitions that are counted.For such more question on variables
https://brainly.com/question/28248724
#SPJ11
Classes and methods are declared final for all but the following reasons:a. final methods allow inlining the code.b. final methods and classes prevent further inheritance.c. final methods are static.d. final methods can improve performance.
The correct answer is b. Final methods and classes prevent further inheritance.In Java, a class or a method can be declared as final, which means that it cannot be subclassed or overridden by any subclasses. When a class is declared as final.
it cannot be extended by any other class, and when a method is declared as final, it cannot be overridden by any subclass.
Final methods and classes prevent further inheritance because they provide a way to prevent other classes from changing the behavior of the final class or method. This can be useful in cases where the behavior of the class or method is critical and should not be modified by subclasses.
The other options mentioned in the question are not valid reasons for declaring a class or method as final.
a. Final methods allow inlining the code - This is not a valid reason for declaring a method as final. The final keyword is used to prevent the method from being overridden by any subclasses, but it does not necessarily have any impact on the inlining of code.
c. Final methods are static - This is not true. A final method can be either static or non-static, but the final keyword does not make the method static.
d. Final methods can improve performance - This is not necessarily true. While the final keyword can sometimes allow the Java compiler to optimize the code, this is not always the case, and the impact on performance is highly dependent on the specific implementation details of the class or method.
Learn more about inheritance here:
https://brainly.com/question/14930526
#SPJ11
dry foam extraction cleaning is ideal for deeply imbedded carpet soil. group of answer choices true false
The statement "dry foam extraction cleaning is ideal for deeply imbedded carpet soil" is false.
Dry foam extraction cleaning is a low-moisture method of carpet cleaning where a machine is used to generate foam from a carpet cleaning solution. The foam is then spread over the carpet and worked into the fibers with a brush. The foam is then allowed to dry, and the dried foam and soil particles are then vacuumed away.
While dry foam extraction cleaning can be effective for removing surface soil and stains, it may not be the best method for deeply embedded soil. This is because the foam is not able to penetrate as deeply into the carpet fibers as other cleaning methods, such as hot water extraction. Hot water extraction uses high-pressure water and cleaning solution to penetrate deep into the carpet fibers and remove soil and other contaminants.
To know more about dry foam extraction,
https://brainly.com/question/30902399
#SPJ11
How does decreasing quantum affect wait time?
When the quantum of a process decreases, it means that each process is given less time to execute before the CPU switches to another process. This can lead to an increase in context switches, which can increase the overhead and ultimately increase the wait time for processes.
It can also improve the overall performance of the system by allowing more process decreases to be executed in a given period of time. Therefore, the effect of decreasing quantum on wait time is dependent on the specific system and workload.
After the aluminium beverage cans have been made and consumed once, they can be recycled by remelting the spent metal.
1) The cans are divided into sections to make them more portable and easy to clean
2) The contaminants and hydrogen gas are then eliminated after the cans are blocked and heated.
3) To obtain the proper alloy specification, the composition of the molten aluminium alloy is changed by the addition of the alloy composition.
4) The molten alloy can then be used and processed into solid aluminium items without the need for much further energy.
Processes 1 and 2, which involve adding energy from sources other than the sun, are subject to the second law of thermodynamics.
Learn more about process decreases here
https://brainly.com/question/17099750
#SPJ11
What should the temperature differential be between the evaporator inlet and _______________.
The temperature differential between the evaporator inlet and outlet is an important factor in the efficiency of a refrigeration system. The ideal temperature differential will vary depending on the specific system, but generally, the difference between the evaporator inlet and outlet temperatures should be between 5-15 degrees Fahrenheit.
For such more question on Fahrenheit
https://brainly.com/question/26141817
#SPJ11
What is the purpose of the network security accounting function?
Maintaining an accurate and up-to-date record of network usage, network security accounting helps to identify potential security threats and vulnerabilities, and allows for timely and effective response to any security incidents that may occur.
The purpose of the network security accounting function is to track and monitor the usage of network resources and ensure that they are being used in a secure and appropriate manner. This function helps to detect and prevent unauthorized access or misuse of network resources, and provides a way to audit network activity for compliance and risk management purposes.
Secure Wi-Fi networks and VPNs use an encryption to secure data transferred over a network.
In the use of a VPN, one has their internet traffic been encrypted, so no there is no intercept of one's network by public Wi-Fi.
Note therefore that VPN secures your Wi-Fi networks and other connection through the use of encryption in all places and thus one do not need to think about external protection.
Learn more about network security here
https://brainly.com/question/12439896
#SPJ11
The overhead service conductors from the last pole or other aerial support to and including the splices, if any, connection to the service-entrance conductors at the building or other structure.
10 def.
The overhead service conductors refer to the wires that are responsible for carrying electrical power from the last pole or aerial support to the building or other structure. These conductors include all the components, including any splices that are used to connect the service-entrance conductors at the building or other structure.
Overall, the structure of these service conductors is an essential aspect of ensuring that electrical service is safely and reliably delivered to homes and businesses.
Overhead support The conductors are those that run from the service point to the building's or other structure's first point of connection to the service-entrance conductors.
A substance or material that allows the passage of power is known as an electric conductor. When voltage is applied, electric charge carriers—typically electrons or ions—move without difficulty from one atom to the next in a conductor.
Conductors are the substances or materials that let energy pass through them. Additionally, conductors allow heat to pass through them. Metals, the human body, the Earth, and animals are some examples of conductors. The body is a powerful conductor.
Learn more about service conductors here
https://brainly.com/question/28298618
#SPJ11
What is the purpose of the memory technology called SPD?
SPD is used in a wide range of memory technologies, including DDR (Double Data Rate) SDRAM, DDR2 SDRAM, DDR3 SDRAM, and DDR4 SDRAM.
SPD (Serial Presence Detect) is a memory technology that is used to store information about a memory module's capabilities and configuration parameters.
This information is stored in a small EEPROM (Electrically Erasable Programmable Read-Only Memory) chip that is built into the memory module.
The purpose of SPD is to allow the system to automatically detect and configure the memory module without requiring manual configuration by the user or system administrator.
The system boots up, it reads the SPD data from each memory module and uses that information to determine the module's capacity, speed, and other configuration parameters.
SPD, the system can ensure that each memory module is configured correctly and is operating at its optimal performance level.
This can help to prevent compatibility issues, system crashes, and other problems that can result from incorrect memory configuration.
It is also used in other types of memory modules, such as RIMMs (Rambus Inline Memory Modules) and SODIMMs (Small Outline Dual In-Line Memory Modules) that are commonly used in laptops and other portable devices.
For similar questions on memory
https://brainly.com/question/29990235
#SPJ11
the fundamental problem associated with the conventional eifs prevalently involved in lawsuits in the past is that
The fundamental problem associated with conventional EIFS (Exterior Insulation and Finish Systems) that has led to numerous lawsuits in the past is primarily related to moisture intrusion and the resulting damage.
Traditional EIFS consists of an insulation layer, a reinforcing mesh, and a durable finish coat.
However, this system does not have an effective drainage mechanism, leading to water infiltration behind the insulation.
Moisture intrusion can cause multiple issues, such as wood rot, mold growth, and structural damage, which may compromise the building's integrity. These problems can lead to costly repairs and health concerns for occupants, resulting in legal disputes.
Modern EIFS systems now include drainage systems, such as a water-resistive barrier and a drainage plane, to mitigate moisture-related problems and reduce the likelihood of future lawsuits.
Learn more about EIFS at
https://brainly.com/question/27982145
#SPJ11
An ideal-gas mixture whose apparent molar mass is 40 kg/kmol consists of nitrogen N2, and two other gases. If the mole fraction of the nitrogen is 0.2, determine its mass fraction. 0.36 0.55 0.14 0.20
To determine the mass fraction of nitrogen in the ideal-gas mixture, we need to use the formula: mass fraction = (mole fraction x molar mass) / apparent molar mass given that the apparent molar mass is 40 kg/mol.
the mole fraction of nitrogen is 0.2. We also know that the ideal gas mixture consists of nitrogen N2 and two other gases. Since nitrogen N2 has a molar mass of 28 kg/kmol, we can calculate the molar mass of the other two gases by subtracting 28 kg/kmol from 40 kg/kmol, which gives us 12 kg/mol for each of the other two gases.
Therefore, the mass fraction of nitrogen in the ideal gas mixture is 0.14 or 14%. Identify the given values:
The apparent molar mass of the mixture: 40 kg/kmol Mole fraction of nitrogen (N2): 0.2. Determine the molar mass of nitrogen (N2): The molar mass of N2: 28 kg/kmol (since N2 consists of two nitrogen atoms, each with a molar mass of 14 kg/kmol).
So, the mass fraction of nitrogen in the ideal gas mixture is 0.20.
To know more about nitrogen:- https://brainly.com/question/16711904
#SPJ11
To determine the mass fraction of nitrogen, we need to first find the mole fraction of the other two gases.
Let x be the mole fraction of gas A and y be the mole fraction of gas B.
Since the apparent molar mass of the mixture is 40 kg/kmol, we can use the formula:
M = (x * MA) + (y * MB) + (0.2 * MN2)
where MA, MB, and MN2 are the molar masses of gases A, B, and N2 respectively.
We can assume that the other two gases are also ideal gases, so their molar masses can be found using their chemical formulas:
MA = molar mass of gas A
MB = molar mass of gas B
Solving for x and y, we get:
x + y = 0.8
and
0.4x + 0.6y = 28
(where 28 is the molar mass of N2)
Solving this system of equations, we get x = 0.3 and y = 0.5.
Therefore, the mole fraction of nitrogen is 0.2 and the mole fraction of the other two gases is 0.3 and 0.5.
To find the mass fraction of nitrogen, we can use the formula:
mass fraction of N2 = (0.2 * MN2) / (0.2 * MN2 + 0.3 * MA + 0.5 * MB)
Substituting the values, we get:
mass fraction of N2 = (0.2 * 28) / (0.2 * 28 + 0.3 * MA + 0.5 * MB)
We don't have enough information to find the exact values of MA and MB, so we can't calculate the mass fraction of nitrogen.
Learn more about mass fraction: https://brainly.com/question/31637659
#SPJ11
A high-speed Internet has a set of access points called ____pops that provide point-of-presence at ________ speeds.
a. giga, gigabit
b. mega, megabit
c. multi, multibit
d. giga, megabit
e. multi, gigabit
A high-speed Internet has a set of access points called POPS that provide point-of-presence at various speeds, including gigabit and megabit speeds.
These days, home internet service is showing up with ridiculously fast internet speed. Across the US, high-speed internet providers have introduced multi-gigabit plans advertising fast speeds of 2,000Mbps, 5,000Mbps or higher, with the fastest internet providers promising even faster speeds in the works. These high-speed plans can get expensive, however, and are likely way more speed than the average household actually needs.
Most cable internet and fiber-optic providers also offer plans that, while slower speeds than the ultrafast multi-gigabit plans, are more practical and affordable while still delivering plenty of speed. In fact, the speed test data for most of these might surprise you. But it's important to note that not all high-speed ISPs are the same, since whether you want to stream, surf or do a little online gaming, a high speed internet connection is essential. Largely, though, you'll find that zip code, and hardware and software limitations are the factors that are most likely to restrict high-speed internet plan options and performance. That said, here are my picks for the best high-speed internet providers.
learn more about high-speed Internet here:
https://brainly.com/question/8152317
#SPJ11
Q10)d) Is UDP reliable? Explain.
UDP is not considered reliable because it does not provide error-checking or recovery mechanisms. Unlike TCP, which guarantees the delivery of packets and checks for errors, UDP sends packets without checking if they have been received or not.
This lack of reliability makes UDP a suitable protocol for applications that require speed and low latency, such as video streaming and online gaming, where occasional lost or delayed packets are acceptable. However, for applications that require accurate and complete data transmission, such as file transfers and email, TCP is the preferred protocol due to its reliability features.UDP, or User Datagram Protocol, is not considered reliable because it lacks built-in error checking and correction mechanisms. Unlike TCP, which provides guaranteed delivery and proper sequencing of data, UDP simply sends datagrams without verifying whether they reach their intended destination or are received in the correct order. This can result in lost or misordered data, making UDP less reliable for certain applications that require guaranteed delivery and data integrity. However, UDP's simplicity and lower overhead can be advantageous for real-time applications, like video streaming or online gaming, where some data loss is acceptable and maintaining low latency is more important.
Learn more about transmission here
https://brainly.in/question/2716268
#SPJ11
For permanently connected appliances rated at not over ______ horsepower, the branch circuit over current device shall be permitted to serve as the disconnectiong means.
422.31
For permanently connected appliances rated at not over 1/8 horsepower, the branch circuit overcurrent device shall be permitted to serve as the disconnecting means, according to section 422.31 of the National Electrical Code (NEC).d
For permanently connected appliances rated at not over 1 horsepower, the branch circuit over current device shall be permitted to serve as the disconnecting means, as stated in section 422.31. This means that the over current device, such as a circuit breaker or fuse, can be used to both protect the circuit and serve as a means to disconnect power to the appliance. However, it is important to note that this only applies to appliances that are permanently connected and not intended to be moved or unplugged frequently.Permanently-connected (hard-wired) appliances are intended to be wired using National Electrical Code (NEC) compliant wiring methods by qualified personnel in accordance with the NEC.
learn more about connected appliances here:
https://brainly.com/question/18713901
#SPJ11
Based on the assumption that the air resistance is negligible, it is suggested that the overallmotion characteristic of a long jumper may be analyzed by assuming that the center of gravity ofthe athlete undergoes a projectile motion. Consider an athlete who jumps a horizontal distance ofD. The angle of initial jump is 45 degrees. Express the takeoff speed (vo), travel time in the airuntil the jumper hits the ground (t), and maximum vertical height (H), using D and gravitationalacceleration (g). Hint: The travel time reaching to the max vertical height (H) is a half of the total travel time (t)
The travel time reaching the max vertical height (H) is half of the total travel time (t) is given as D/4
What is Maximum Vertical Height?The maximum vertical height is the highest point reached by an object in the air, measured from ground level.
The max height in physics is affected by the object's velocity, launch angle, and air resistance. It's crucial in sports like basketball and high jump where the goal is to reach the highest possible height.
The image provided shows the flight of the athlete and then finds his vertical height.
Read more about vertical height here:
https://brainly.com/question/27101452
#SPJ1
What changes in airplane longitudinal control must be made to maintain altitude while the airspeed is being decreased? A) Increase the angle of attack to produce more lift than drag. B) Increase the angle of attack to compensate for the decreasing lift. C) Decrease the angle of attack to compensate for the increasing drag.
To maintain altitude while decreasing airspeed, the angle of attack of the airplane's wings must be increased to produce more lift than drag. This means that Option A, "Increase the angle of attack to produce more lift than drag," is the correct choice.
By increasing the angle of attack, the wings generate more lift, which counteracts the decrease in airspeed and allows the airplane to maintain its altitude.
Option B, "Increase the angle of attack to compensate for the decreasing lift," is incorrect because the angle of attack must be increased to produce more lift, not simply to compensate for the decreasing lift.
Option C, "Decrease the angle of attack to compensate for the increasing drag," is also incorrect because decreasing the angle of attack would reduce lift, making it more difficult to maintain altitude.
Option A is answer.
You can learn more about angle of attack at
https://brainly.com/question/30746770
#SPJ11
Question 48
Lead-based paint may be used for:
a. exterior house paints
b. painting toys
c. painting bridges
d. painting special furniture
Answer:
d.painting special furniture.
Explanation:
Fun fact!
In the 1960s, lead was used to make some kinds of paint - for windows, doors and other woodwork as well as for some metal items, like radiators.
Frames of switchgear and control assemblies shall be _____________.
490.36
Frames of switchgear and control assemblies shall be suitable for the content loaded within them. According to NEC 490.36, the frames must be able to withstand the weight and distribution of the equipment and components installed within the assemblies.
Properly designed and constructed frames are essential for the safe and reliable operation of switchgear and control assemblies. The frames must be able to protect the equipment from damage, provide adequate support, and allow for proper ventilation. As such, manufacturers of switchgear and control assemblies should pay close attention to the design and construction of the frames to ensure compliance with NEC 490.36 and the safety of the equipment. Frames of switchgear and control assemblies shall be content loaded.
Learn more about switchgear here: brainly.com/question/30745390
#SPJ11
The efficiency of a heat pump operating in the heat mode tends to _____ as the outside air temperature drops.
It is correct to state that the efficiency of a heat pump operating in the heat mode tends to drop or decrease as the outside air temperature drops.
What i s the reason for the above phenomenon?The above can be said to be due to the heat pump's capacity to move heat from the outside air to the inside of the building space.
As the temperature of the outside air lowers, the heat pump needs to work more to collect heat from the colder air, which reduces its efficiency.
Some heat pumps are equipped with additional (aux) heating systems, such as electric resistance heaters or gas furnaces, to maintain the required temperature in cooler conditions for the interior.
Note that these systems can supply additional heat when the efficiency of the heat pump dips, but they are often less efficient and more expensive to run than the heat pump itself.
Learn more about heat pump at:
https://brainly.com/question/13198025
#SPJ1
Duringan annual cleaning of an outdoor condensing unit, bent fins should be _______________.
During an annual cleaning of an outdoor condensing unit,, bent fins should be straightened out to ensure proper airflow and maximum efficiency.
The condensing unit is an essential part of any air conditioning or refrigeration system, and it works by transferring heat from the indoor air to the outside environment. The fins in the unit play a crucial role in this process by helping to dissipate the heat absorbed by the refrigerant.
Over time, the fins may become bent or damaged due to various reasons such as weather conditions, debris accumulation, or accidental damage.
When fins are bent, the airflow through the condenser coil can be restricted, causing the unit to work harder and less efficiently, leading to higher energy costs and potential damage to the system.
Straightening the bent fins during the annual cleaning process is a relatively simple and inexpensive maintenance task that can have a significant impact on the performance of the system.
It involves using a fin comb or a similar tool to gently straighten the fins back to their original position. This process allows air to flow more freely through the coil, reducing the workload of the compressor and improving the overall efficiency of the system.
In conclusion, during an annual cleaning of an outdoor condensing unit, straightening the bent fins is an essential task that should not be overlooked.
It is a simple and cost-effective way to maintain the efficiency of the system and ensure its longevity, ultimately saving you time and money in the long run.
For more question on "Outdoor Condensing Unit" :
https://brainly.com/question/26261685
#SPJ11
Which group of IPv6 addresses cannot be allocated as a host source address?
As the question suggests, the group of IPv6 addresses that cannot be allocated as a host source address are the multicast addresses. Multicast addresses are reserved for communication to multiple hosts simultaneously and cannot be used as a source address for a single host.
The group of IPv6 addresses that cannot be allocated as a host source address is the "Multicast" addresses.
In IPv6, multicast addresses have a prefix of "FF00::/8".
These addresses are used to send packets to multiple hosts simultaneously, rather than a single host, and therefore cannot be used as a source address for a specific host.
Learn more about communication at : brainly.com/question/22558440
#SPJ11
T/F : One of the most important responsibilities derivative classifiers have is to analyze and correct the original classification authority's decisions.
False. While derivative classifiers have the responsibility to analyze and apply the original classification authority's decisions, it is not their role to correct those decisions. They must ensure that the information they are handling is protected in accordance with the appropriate classification guidelines.
Derivative classifiers are responsible for analyzing and evaluating information to identify elements that require classification. Derivative classifiers are responsible for analyzing and evaluating information to identify elements that require classification
Derivative classification is the process of determining whether information that is to be included in a document or material has been classified and, if it has, ensuring that it is identified as classified information by marking or similar means. It involves incorporating, paraphrasing, restating, or generating in new form information that is already classified.The derivative classification concept of "Contained in" applies to all of the following EXCEPT: When the information must be deduced as classified by some level of analysis.
learn more about derivative classifiers here:
https://brainly.com/question/30142703
#SPJ11
A frame is transmitted from one networking device to another. Why does the receiving device check the FCS field in the frame?
The receiving device checks the Frame Check Sequence (FCS) field in the frame to ensure that the frame has not been corrupted during transmission.
The FCS field contains a mathematical checksum that is calculated by the transmitting device before the frame is sent. When the frame is received, the receiving device recalculates the checksum and compares it to the value in the FCS field.
If the two values match, the frame is considered error-free and is accepted. If the values do not match, the receiving device assumes that the frame has been corrupted during transmission and discards it.
Therefore, the FCS field is an important mechanism for ensuring the reliability of data transmission in a network.
A frame is transmitted from one networking device to another in a networking environment.
The receiving device checks the FCS (Frame Check Sequence) field in the frame to ensure data integrity and detect any possible errors that may have occurred during the transmission process.
The FCS is a type of error-detection mechanism that helps maintain the reliability and accuracy of the data being transmitted between devices.
By checking the FCS field, the receiving device can verify if the received frame is error-free or corrupted, and take appropriate action, such as requesting retransmission or discarding the frame.
Learn more about network click here:
brainly.com/question/14276789
#SPJ11
What electronic device leads to the 0s and 1s (bits) in a computer?
a. An atom
b. A molecule
c. A switch
d. A generator
The correct answer is c. A switch. The switches in a computer's circuits are responsible for controlling the flow of electricity and producing the binary code of 0s and 1s, also known as bits, that the computer uses to process and store information.
The electronic device that leads to the representation of 0s and 1s (bits) in a computer is:
c. A switch
Switches, specifically transistors, are used to control the flow of electrical signals, representing binary values (0s and 1s) in a computer.
Binary and change. It is a binary number system: a way of counting. We've all learned to count ten numbers: 0-9. One reason is that we have ten fingers to represent numbers. Computers have switches that represent information, and switches have only two states: ON and OFF.
Binary has two numbers: 0 and 1 - one corresponds to two change states (0 = OFF, 1 = ON). Changes to the way the were modified made computers faster, cheaper, and smaller. Originally, the key was a vacuum cleaner about the size of a human thumb. He invented the transistor in the 1950s (and won a Nobel Prize for its inventor). Allows keyboards to be the size of a human finger. The development of integrated circuits in the 1960s allowed millions of transistors to be built on a single silicon chip – allowing millions of switches to be placed on something the size of a finger.
Learn more about information:
brainly.com/question/31059452
#SPJ11
A Boeing 777 landed at Chicago O’Hare Airport (668 m elevation) where the pressure is 98. 8 kPa. Assume that the landing speed is 196. 4 mi/hr. This 777 wing has a coefficient of drag of 0. 034 and its wing area is 429. 1 m2. What is the drag at the point where the aircraft just lands on the ground? Note that these conditions are non-standard so use altitude to calculate temperature then use the pressure given to calculate density
The drag at the point where the aircraft just lands on the ground is approximately 66987 N.
How to calculate the drag force of an aircraftDrag = [tex]\frac{1}{2}*density*velocity^{2} *coefficient of drag*wing area[/tex]
where:
density = atmospheric density at the landing altitude
velocity = landing speed of the aircraft in meters/second
Convert the landing speed from miles per hour to meters per second:
196.4 mi/hr = (196.4*1609.34 m) / (3600 s) = 87.8 m/s
Calculate the atmospheric density at the landing altitude using the following formula:
density = [tex]\frac{pressure}{specific gas constant * temperature}[/tex]
where:
specific gas constant for dry air = 287.058 J/(kg*K)
temperature = standard temperature at sea level - temperature lapse rate * altitude
Assuming a temperature lapse rate of 0.0065 K/m and a standard temperature at sea level of 288.15 K, we can calculate the temperature at the landing altitude as follows:
temperature = 288.15 K - 0.0065 K/m * 668 m = 283.7 K
Substituting these values into the density formula, we get:
density = 98.8 kPa / (287.058 J/(kg*K) * 283.7 K) = 1.036 kg/m³
Finally, we can calculate the drag using the drag formula:
Drag = (1/2) * 1.036 kg/m³ * (87.8 m/s)² * 0.034 * 429.1 m² = 66987 N
Learn more about drag force here:
https://brainly.com/question/27817330
#SPJ4
a ____ shovel is intended for moving loose material.
The answer to the question: "a ____ shovel is intended for moving loose material"
A scoop shovel is intended for moving loose material.
Learn more about loose material: https://brainly.com/question/17563681
#SPJ11
The process of using existing classified information to create new material and marking the new material consistent with the classification markings that apply to the source information is called?
The process of using existing classified information to create new material while maintaining the original classification markings is known as derivative classification.
This process involves taking information that has already been classified and using it to create new documents or materials.
The new material must be marked with the same level of classification as the original source information, as well as any additional markings necessary to reflect the content of the new material.
Derivative classification is an important process in maintaining the confidentiality of classified information.
By using existing classified information to create new materials, the risk of exposing sensitive information is reduced.
It also allows for more efficient use of classified information, as it can be used to create multiple documents without the need for additional classification reviews.
It is important to note that derivative classification should only be done by authorized personnel who have been trained in the proper handling of classified information.
Improper handling of classified information can result in severe consequences, including legal action and loss of security clearances.
Derivative classification is the process of using existing classified information to create new materials while maintaining the original classification markings.
It is an important tool for maintaining the confidentiality of classified information but must be done by authorized personnel who have been properly trained in handling classified information.
For similar questions on material
https://brainly.com/question/17546069
#SPJ11
Question89
One of the first actions an individual should take upon hearing an order for the evacuation of homes and businesses is turn off the
a. Main electric power switch
b. Outside gas valve
c. Property water supply valve
d. Public utility services to the building
Answer:
a
Explanation:
because bcd are incorrect
Which mathematical operator is used to raise five to the second power in Python? /
**
^
In Python, the mathematical operator used to raise five to the second power is the double asterisk (**). Your expression would look like this:5 ** 2`
Python is a high-level, interpreted programming language used for a wide range of applications, including web development, data analysis, artificial intelligence, and scientific computing. It has a simple and concise syntax, making it easy to learn and use, while also providing powerful programming capabilities. Python's standard library includes modules for tasks such as file I/O, regular expressions, and networking, while its extensive third-party library ecosystem offers a wealth of additional functionality. Python is an open-source language, which means that it is free to use, distribute, and modify. Its popularity has grown rapidly in recent years due to its ease of use, versatility, and large and supportive community of developers and users.
Learn more about Python here:
https://brainly.com/question/30365096
#SPJ11