An electron in the hydrogen atom makes a transition from an energy state of principal quantum numbers into the n=2 state. If the photon emitted has a wavelength of 434 nm, what is the value of ni? (RH = 2.18 X 10-18 J)

The conjugate acid of H₂PO4 is H₃PO₄.

The correct option is D.

Conjugate acids are chemical species that are formed when a base accepts a proton.

A conjugate acid contains one more proton than the base from which it is formed.

Conjugate acids are derived from the Brønsted–Lowry acid–base theory, which states that an acid is a  chemical compound that donates a proton to a base.

The conjugate acid of H₂PO4⁻ will contain one more proton and a higher positive charge than H₂PO4⁻. Hence, the conjugate acid of H₂PO4⁻ is H₃PO₄.

Learn more about conjugate acids at: https://brainly.com/question/12584785

#SPJ1

The following compounds in order of decreasing strength of intermolecular forces is as follows :

CH₃CH₂CH₂CH₂CH₂CH₃ > (CH₃)₃CCH₂CH₃ > (CH₃)₃CCH₃

1) The following compounds in order of decreasing strength of intermolecular forces is as follows : as the surface are decreases the intermolecular force decrease or as branching increases intermolecular forces decreases.

CH₃CH₂CH₂CH₂CH₂CH₃ > (CH₃)₃CCH₂CH₃ > (CH₃)₃CCH₃

2)  the compound CH₃CH₂CH₃ have the weaker van der wall forces and having the lowest boiling point.

3) the following substances in order of increasing vapor pressure at a given temperature is as follows :

SF₄  < SF₆   <  SiH₄  

SF₄ is the polar molecular and hs the lowest vapor pressure.

To learn more about intermolecular force here

https://brainly.com/question/14774937

#SPJ4

The chain of atoms that are joined together to form the essential structure of an organic substance is called the skeletal structure.

The following sentences provide crucial guidelines for depicting skeletal structures:

1) Each heteroatom and the hydrogen atoms that are chemically connected to it.

2) A carbon atom can be found at the end of any line or at the intersection of any two lines.

3) Each carbon has four bonds because there are enough hydrogen atoms surrounding it.

These three option are the correct statements to describe the important rule for the drawing skeletal structures to represents the important structure of the organic compound.

The position of the carbon and hydrogen atoms are indicated by lines in the skeletal structure, line formula, or abbreviated formula for organic compounds. The endpoints of the lines and their intersections, as well as the hydrogen atom deduced from the number of bonds exhibited between each other, illustrate where the carbon atoms are located in the skeletal structure.

Hetero-atoms are any atoms other than carbon and hydrogen. The only hydrogen atoms that must be present in skeletal structure are those that are physically connected to a hetro atom.

To learn more about skeletal structure Please click on the given link:

brainly.com/question/28605306

#SPJ4

Answer:

Inner core, outer core, mantle, crust

Explanation:

The maximum internal crack length allowable for a ti-6al-4v titanium alloy is 4.134 mm.

Calculation:-

Find the allowable internal cracking length as follows:

[tex]2a_{c}\frac{2}{\pi } ( {\frac{k_{ic} }{yo} })[/tex]

= 2/π (55/1.5×455)²

= 0.004134 m

= 4.134 mm

Critical crack length marks the transition from a stable crack growth regime to an unstable crack growth regime leading to catastrophic rupture or failure. The rearrangement gives the critical crack size for a given tensile stress. Ultimate strength is the ability of a material to resist failure and is named.

Critical crack size is the length at which a crack becomes unstable at a given stress. It is very useful in determining the safety of materials. An unstable crack propagates spontaneously without increasing the magnitude of the applied stress once it begins to propagate.

Learn more about Internal crack here:- https://brainly.com/question/17086844

#SPJ4

True.

Polar substances have electronegativity differences while non polar substances do not have differences.

The analyze is:

N2F2 is polar. Because there are differences in the electro negativity values of the 2 elements. But the polarity depends on the type of isomer, the cis isomer form is polar because it has a dipole moment of 0.16 D. Meanwhile the trans isomer form is non polar because it doesn't have a dipole moment.

Learn more about N2F2 at: https://brainly.com/question/11795175

#SPJ4

Answer:

Explanation:

1+ 2+ 3+

copper(I), Cu+ cadmium, Cd2+ chromium(III), Cr3+

gold(I), Au+ chromium(II), Cr2+ cobalt(III), Co3+

mercury(I), Hg22+ cobalt(II), Co2+ gold(III), Au3+

silver, Ag+ copper(II), Cu2+ iron(III), Fe3+

A public good cannot be provided to one person without making it available to others as well.

A non-exclusive, non-rivalrous good is referred to as a public good. It cannot be given to just one person without also being made available to others. If one person uses it, it doesn't prevent others from doing so as well. Roads are an illustration of a public good.

Club goods and private goods are in opposition to public goods. An example of a public good is a club good. It is non-rivalrous but excludable. One example of a club good is paid streaming services. The service is not available to those who do not subscribe. However, each subscriber is equally valued by the service.

To learn more about public goods, visit the link below:

brainly.com/question/14975509

#SPJ4

Answer:

C

Explanation:

Based on the information provided, it is likely that the observation will be a purple layer below a colorless layer. Potassium manganate(VII) is a purple crystalline compound that is often used as a laboratory reagent. When it is placed in water, it will dissolve and form a purple solution. However, if the solution is left to stand for a period of time, the purple color will gradually fade and a colorless layer of liquid will form at the bottom of the container, with the purple crystal unchanged at the top. Therefore, the most likely observation in this experiment will be a purple layer below a colorless layer (Option C).

The pollutants which may be released into the environment during the production or incorrect disposal of batteries include the following:

A. SO₂

C. Toxic metals

D. CO₂

In Science, a pollutant can be defined as a harmful, poisonous and toxic chemical substance or chemical compound that is capable of causing physical degradation or contamination to the environment through emission such as the burning of coal, production of batteries, or incorrect disposal of batteries.

Generally speaking, some examples of the primary pollutants that are produced from the burning of coal and incorrect disposal of batteries include the following:

In conclusion, toxic metals are most likely to be released due to the incorrect disposal of batteries or even during its production.

Read more on pollutants here: https://brainly.com/question/12044094

#SPJ1

Complete Question:

Which of the following pollutants may be released into the environment during the production or incorrect disposal of batteries? Select all that apply.

SO₂

H₂O

Toxic metals

CO₂

FeO

The reaction between cobalt (II) chloride and potassium hydroxide can be depicted as follows:

CoCl2(aq)+2KOH(aq)----> Ca(OH)2(s)+2KCl(aq)

A double displacement reaction is one that involves the exchange of ions and leads to the formation of new products. The products that are soluble in water are represented by the symbol (aq) and the ones that are insoluble in the water remain in the (s) or precipitate form along with the chemical formulas.

The double displacement reaction can be depicted as follows:

XY+AB--->AB+AY

The reaction between cobalt (II) chloride and potassium hydroxide can be depicted as follows:

CoCl2(aq)+2KOH(aq)----> Ca(OH)2(s)+2KCl(aq)

To learn more about double displacement reaction check the link below:

https://brainly.com/question/26413416

#SPJ4

If a buffer solution is created by adding NaOH to a solution of benzoic acid, C6H5COOH, the effective buffer range for the solution will be (d) 3.20 - 5.20.

pKa of benzoic acid = 4.20

The effective buffer range of solution = ?

The term "buffer" can also refer to a solution that has reserve acidity or alkalinity and is able to resist a change in pH even after a trace amount of acid or alkali has been added to it.

Any buffer has an effective pH range of one pH unit on either side of the pKa value for the weak acid.

As the pKa is 4.20

then pH range will be

4.20 +- 1

pH range = 3.20 - 5.20

You can also learn about buffer solution from the following question:

https://brainly.com/question/24262133

#SPJ4

Answer: Oxygen

Explanation: Oxygen is just an element, not a solution

Using complex-forming processes, complex metric titrations are primarily used to identify metal ions.

Although there are various complexing agents that can be utilized for this task (cyanide, thiocyanate, fluoride, 1,2-diaminoethane, etc.), in actuality the titrants are usually invariably compounds with the iminodiacetic acid functional groups. The sodium salt, Na₂H₂Y 2H₂O, and ethylenediaminetetraacetic acid are the two that are used the most frequently (better soluble in water).

Most requirements for a good complexometric titrant are mostly met by EDTA. It reacts quickly with most metal ions (except Cr₃⁺), forms sufficiently stable complexes with most metal ions, all of the complexes have perfect 1:1 stoichiometry (independent of the charge of the cation), are water soluble, and are colorless (unless the metal is present).

(unless the metal ion is colored by itself). A typical metal ion's reaction with EDTA (H₄Y) can be expressed as follows:

that is, as a battle between the metal ion and hydrogen ions for interacting with Y₂−. The equilibrium constant for the reaction, KMeY, which measures the stability of binding of Men + with Y₂ is as follows.

To know more about complex metric titrations, please refer:

https://brainly.com/question/17784644

#SPJ4

The amino acid phenylalanine can be made in the laboratory. Ore NH3 reagents needed to make this molecule.

Phenylalanine is a crucial amino acid with the chemical formula C 9H 11NO 2. Its symbol is Phe or F.  Reagents like benzyl group in place of the methyl group in alanine or as a phenyl group in place of the terminal hydrogen. This significant amino acid is classified as neutral and nonpolar due to the inert and hydrophobic nature of the benzyl side chain. The L-isomer is used in the biochemical synthesis of DNA-coded proteins. Precursors of phenylalanine include tyrosine, the monoamine neurotransmitters dopamine, norepinephrine (noradrenaline), and epinephrine (adrenaline), as well as the skin pigment melanin. It is encoded by the codons UUU and UUC. Phenylalanine is a substance found in animal milk. It is used to make food and drink products and is marketed as a dietary supplement due to its analgesic and depressive qualities. It is a direct precursor to the neuromodulator dietary supplement phenethylamine. Because neither humans nor other animals can synthesize phenylalanine, it must be ingested or found in proteins, making it an essential amino acid.

To know more about reagents please refer: https://brainly.com/question/28504619

#SPJ4

Answer:

Explanation:

To calculate the value of the Ideal Gas Law Constant (R), we need to make some reasonable assumptions about the missing data.

First, let's assume that the atmospheric pressure is 1 atm. This is a reasonable assumption, as atmospheric pressure is typically close to 1 atm at sea level.

Next, we need to calculate the number of moles of gas produced by the reaction. We can do this by using the mass of potassium chlorate before and after the reaction. The initial mass of potassium chlorate was 191.3 mg, and the final mass was 52.9 mg. This means that 191.3 mg - 52.9 mg = 138.4 mg of potassium chlorate were converted into gas.

The molar mass of potassium chlorate is 122.55 g/mol, so 138.4 mg is equivalent to 138.4 mg / 122.55 g/mol = 1.13 x 10^-3 mol of potassium chlorate. Since the reaction produces two moles of gas for every mole of potassium chlorate, the total number of moles of gas produced by the reaction is 1.13 x 10^-3 mol x 2 = 2.27 x 10^-3 mol.

Finally, we need to calculate the volume of gas produced by the reaction. We can do this using the Ideal Gas Law, which states that the volume of a gas is equal to the number of moles of gas times the gas constant (R) divided by the pressure and temperature of the gas. Since we have already calculated the number of moles of gas and we have assumed the pressure to be 1 atm, we just need to calculate the temperature of the gas in Kelvin. The temperature of the gas in Celsius was 34.5 %€, so we can convert this to Kelvin by adding 273.15: 34.5 %€ + 273.15 = 307.65 K.

We also know that the volume of water displaced by the gas is 49.18 mL, and the height of the water column remaining is 5.8 cm. We can convert this to volume by using the formula for the volume of a cylinder: V = πr^2h, where V is the volume, r is the radius of the eudiometer, and h is the height of the water column remaining. Sincethe radius of the eudiometer is half the diameter, we can calculate the radius as 0.5 x 2.5 cm = 1.25 cm. Since the height of the water column remaining is 5.8 cm, the volume of the water displaced by the gas is π x 1.25^2 x 5.8 = 41.83 mL.

We can now use the Ideal Gas Law to calculate the volume of the gas produced by the reaction: V = nR/P * T = 2.27 x 10^-3 mol x 8.31 J/molK / 1 atm x 307.65 K = 0.721 L.

We can now use the Ideal Gas Law to calculate the value of R: R = PV/nT = 1 atm x 0.721 L / 2.27 x 10^-3 mol x 307.65 K = 8.31 J/molK.

Therefore, the value of the Ideal Gas Law Constant (R) is 8.31 J/molK.

In summary, to calculate the value of R, we made some reasonable assumptions about the missing data and used the Ideal Gas Law to calculate the volume of gas produced by the reaction. Using this information, we were able to calculate the value of R to be 8.31 J/molK.

The temperature of the reaction system will all increase the rate of a reaction.

Collision theory states that the rate of a chemical reaction is proportional to the number of collisions between reactant molecules. The more often reactant molecules collide, the more often they react with one another, and the faster the reaction rate.

Energetic collisions between molecules cause interatomic bonds to stretch and bend, temporarily weakening them so that they become more susceptible to cleavage. Distortion of the bonds can expose their associated electron clouds to interactions with other reactants that might lead to the formation of new bonds.

With an increase in temperature, there is an increase in the number of collisions. Increasing the concentration of a reactant increases the frequency of collisions between reactants and will, therefore, increase the reaction rate.

Learn more about rate of reaction here:- https://brainly.com/question/24795637

#SPJ4

Answer:

-be properly aligned to rearrange into the products

-be in contact with the other reactant rather than another molecule of itself

-have sufficient energy to overcome the activation energy of the reaction

Explanation:

Three criteria must be met for a collision to lead to a successful reaction. In general, the collision must be set up to allow the reactants to rearrange into the products. The direction of motion before the collision does not make a difference.

The first condition for a successful collision is that the collision must be between the two reactants, rather than a molecule colliding with another molecule of itself. A higher temperature will lead to more collisions between all molecules, but only collisions between the two reactants will result in a reaction occuring.

Second, the molecules must be lined up properly for the reaction to occur. For example, a molecule made up of two different elements needs to have the correct element collide with the other reactant molecule to be able to make the correct new bond.

Third, the molecules must have enough energy to overcome the activation energy necessary to make the bond rearrangements into products. A benefit of a higher temperature reaction, beyond the increased collisions, is that the molecules are more likely to have the energy needed to complete the reaction.

A region of the vacuum that contains both uniform electric field and a uniform magnetic field is called electromagnetic radiation.

A region of the vacuum that contains uniform electric and magnetic field simultaneously is called an electromagnetic radiation or an Electromagnetic wave.

Wave does not recover any medium to travel because it is made up of electric and magnetic field which also do not require any medium to be in existence.

An Electromagnetic wave travels with the speed of light. The component of the electric field and the magnetic field contributes equally in sense of energy of the wave.

To know more about electromagnetic wave, visit,

https://brainly.com/question/25847009

#SPJ4

Draw the organic product(s) of the following reactions including stereochemistry when it is appropriate. H₂ lindlar catalyst is given as :

CH₃-C≡C-CH₂-CH₂- CH₃ + H₂ Lindlar catalyst --> CH₃ - C=C - CH₂ -CH₂- CH₃

                                                                                            |   |

                                                                                            H H

The lindlar catalyst is used to hydrgenate the bond into the double bonds. H₂ + lindlar catalyst is used to reduce the alkynes which contains the triple bond in to the alkene which contains the double bond. the H₂ + lindlar catalyst doest noty react with the the alkenes.  the reaction of H₂ + lindlar catalyst is given as follows :

CH₃-C≡C-CH₂-CH₂- CH₃ + H₂Lindlar catalyst --> CH₃-C=C - CH₂ -CH₂- CH₃

2 - hexyne                                                                           |   |

                                                                                            H H

                                                                                           2 - hexene

To learn more about lindlar catalyst here

https://brainly.com/question/12941795

#SPJ4

Aldol condensation is a reaction that results in the formation of a carbon-carbon bond, an enol or enolate molecule, and an aldehyde or ketone.

Removing the alpha hydrogen, establishing fresh carbon and carbonyl bonds, and changing carbonyl groups into COH.

These reactions include an enol or enolate ion reacting with a carbonyl molecule to produce a -hydroxy aldehyde or -hydroxy ketone, which is then dehydrated to produce a conjugated enone. Let's talk more about cross aldol condensation, the aldol condensation process, and its mechanism.

Thus, the acetaldehyde enolate's nucleophilic addition to benzaldehyde produces the aldol product: We will discuss all the additional potential outcomes and specifics of the crossover aldol reaction.

To learn more about Aldol condensation please click on below link

https://brainly.com/question/9415260

#SPJ4

The increase in concentration of CO₂ will leads to form low pH of water because CO₂ is a acidic oxide. The temperature will also rising, this an organism that is experiencing an elevated carbon dioxide concentration most likely do.

The heat that is trapped aids in keeping the earth's temperature constant. However, the amount of heat trapped in the atmosphere will grow as CO₂ levels rise. Global warming is the process through which the earth's temperature rises as a result.

An immediate rise in CO₂ does not reduce respiratory oxygen consumption; rather, it increases with prolonged development in the field at increasing CO₂. Thus, the increase in concentration of CO₂ will leads to form low pH of water because CO₂ is a acidic oxide. The temperature will also rising, this an organism that is experiencing an elevated carbon dioxide concentration most likely do.

To know more about concentration of CO₂, refer to:

https://brainly.com/question/19582316

#SPJ1

The complete question is as follows:

1.00029 is possibility of repeating unit of  polymers. In the given given figure, unit structures for the polymers.

P is probability of repeating unit.

Relation between weight average molecular weight Mw / number average molecular weight,  Mn =1+P

 Mw/Mn= 1+P

Degree of polymerization K = 1/ (1-P)

P = 1 + 1/K = 1 + 1/3420 = 1 + 0.00029 = 1.00029 is possibility of repeating unit of  polymers.

Hence, 1.00029 is possibility of repeating unit of  polymers.

Learn more about polymers here:- https://brainly.com/question/1602388

#SPJ4

Statement 1 and statement 4 are true about the volume and temperature relationship.

Boyle's law, an experimental gas law, illustrates the connection between a confined gas's pressure and volume. It claims that when the temperature of a mass of confined gases is constant, the product of pressure and volume is similarly constant.

By this law, the temperature and volume relationship is given by,

[tex]V \propto T[/tex] where V is volume and T is the temperature at constant pressure.

From this relationship, we can tell, when the temperature of the gas increases, it increases the volume also. This is because the volume of gas is directly proportional to its absolute temperature.

To know more about Boyle's law:

https://brainly.com/question/11233262

#SPJ4

Answer:

C.

Explanation:

The 6-phosphate derivative of mannose, one of the eight essential monosaccharides, is biosynthesized from fructose 6-phosphate. The oxygen atom experiences electron migration.

The most fundamental type of a carbohydrate is a monosaccharide. Larger carbohydrates, such as oligosaccharides or polysaccharides, can be created by joining monosaccharides through glycosidic linkages. A disaccharide is an oligosaccharide that contains just two monosaccharides. An oligosaccharide turns into a polysaccharide when it forms glycosidic connections with more than 20 monosaccharides.

A simple sugar called d-mannose can be found in many fruits. It has to do with glucose. In some human body cells, it also happens naturally.

To learn more about mannose visit:

brainly.com/question/23316904

#SPJ4

None of them are true statements regarding beer's law. Limiting factors, including using only diluted liquids and monochromatic light, must be taken into account when applying legislation to any analysis.

The following is stated by Beer's law: The sample concentration and sample path length for a particular substance are directly related to the light absorbance.

You can see from the formula for absorbance that it depends on three things: the solution's molar absorptivity, the path length, or the distance traveled by light in the sample cell, and the solution's concentration.

Learn more about absorption here:

https://brainly.com/question/19054395

#SPJ4

Molality: This feature of solutions tells us how many moles there are in a kilogram of the solvent. It is a way of displaying any solution's concentration.

a. We have,

42.95 degrees Celsius is the freezing point of pure lauric acid.

Benzoic acid and Lauric acid have a freezing point of 47.27 C.

Cryoscopic constant =3.90∘C⋅kg⋅mol−1

We know,

Δt=kf×m

(47.279−42.950)=3.90×m

m=3.90/4.329

m=0.9mol/kg

b. We know,

Lauric acid weighs 8.02 x 10(-3) kg (w1)

Suppose there are n2 moles of benzoic acid, which means:

w2/M2=n2

Where, w2 is the solute's andmolar mass of solute.

Hence,

m=(w2/M2 × 1/w1)mol/kg

And the number of moles is given as,

n=m×w1

  =0.9×8.02×10^(-3)

  =0.0072mol

As a result, there are 0.0072 moles of benzoic acid solute.

c. The experimental molar mass of benzoic acid,

=(w2/n2) g/mol

=1.04/0.0072

=144 g/mol

d. The accepted molar mass of benzoic acid

(CH3COOH) will be,

=(7×12)+(6×1)+(2×16) g/mol

=122 g/mol

e. Following are the details of the difference between the experimental and acceptable value:

= experimental molar mass - accepted molar mass  × 10/ accepted molar mass

= 144-122 ×100/122

=18.08%

f. By repeating steps 1 to 3, the molar mass of the unknown solute will be,

Step 1: Calculation of molality

   Δt=kf×m

2.34=3.90×m

    m=0.6

Step 2: Calculation of the number of moles of an unknown solute

n2=7m×w

   =0.6×(8.04×10^(-2))

   =0.0482 mol

Step 3: Calculation of molar mass of unknown solute

M = w/n

  =    0.98/  0.0482

  =23.11

To know more about Molality click here brainly.com/question/26921570

#SPJ4

Answer:

Explanation:

Correct option is ( A ).

in this respective reaction 3MnO2 + 4Al ---- 3Mn + 2Al2O3 ,

MnO2 is acting as an oxidising agent i.e. it oxidises Al to Al2O3.

Hence ,  it is an Redox reaction.

Option (b). 22 g He have the greatest volume at STP because it has the lower molar mass.

1 mole of gas at STP will have volume 22.4L (for all gases)

Mole is defined as the amount of a substance that contains the number of carbon atoms in exactly 12 g of isotopically pure carbon-12 .  It allows determination of the number of molecules or atoms by weighing them.      

         number of moles = mass / molar mass 

mass is the same for all. if moles will be high then the volume will be high . the mole will be high only which have a lower molar mass . The molar mass is defined as the mass in grams of 1 mole of that substance. For an element, the molar mass is the mass of 1 mole of atoms of that element for a covalent molecular compound it is the mass of 1 mole of molecules of that compound. for an ionic compound, it is the mass of 1 mole of formula units. so in all, He has a lower molar mass. so it will have highest no of moles.

To learn more about Molar mass please visit:

https://brainly.com/question/21334167

#SPJ4