A crate with a mass of 175.5 kg is suspended from the end of a uniform boom with a mass of 94.7 kg. The upper end of the boom is supported by a cable attached to the wall and the lower end by a pivot (marked X) on the same wall.
Calculate the tension in the cable.

Material P does not always lead to the glowing of the bulb hence the material P is an insulator.

The term insulator refers to an object that does not permit current to pass through it. Insulators include materials such as wood, plastic etc.

Looking at the two circuits, we can see that the material P does not always lead to the glowing of the bulb hence the material P is an insulator.

Learn more about  insulator:https://brainly.com/question/24909989

#SPJ1

The boat will move in a direction that is 36.86 degrees away from the velocity vector as it attempts to reach the opposite bank from where it started.

We must understand the issue with the river crossing in order to identify the solution.

                                   [tex]\alpha =sin^{-1}(\frac{V_R}{V_B} )[/tex]

                                       [tex]\alpha =sin{-1}(\frac{3}{5} )[/tex]

Thus, we can deduce that the boat will move in a direction that is 36.86 degrees away from the velocity vector as it attempts to reach the opposite bank from where it started.

Learn more about the velocity vector here:

https://brainly.com/question/1892855

#SPJ1

Answer:

Force of bug is less than the force that the bus exerts on the bug

Explanation:

Force = MA. bus has more mass so more force and bug has a lot less mass than bus. Bug accelerates in whatever direction the bus is going and the bus is not affected.

The speed after it has traveled 0.400 m up the wall will be 1.77 m/sec.

From the work-energy theorem, it is stated that the net work done is equal to the change in the kinetic energy.

Given data;

Mass of book,m =5.00

Force,F = 96.0 N

Θ is the angle above the horizontal =  60°

The coefficient of kinetic friction between the book and the wall is μ =0.300.

R is the normal reaction

W₁ = Fd cosΘ

W₁=(96.0 N) (0.4 m) in 60°

W₁= 33.25 J

Work done by gravity is,

W₂ = mgdcos180°

W₂ = (5.00 kg) (9.81 m/s²)(0.4 m) cos180°

W₂ = -19.6J

The Normal force on the book by the wall is,

N = FcosΘ

N = (96 N) cos 60°

N=48 J

Work done by friction is;

W₃=μkRdcos180°

W₃=0.3)(48 J)(0.4 m) cos180°

W₃ =-5.76 J

The net work done is;

W =W₁+W₂+W₃

W=33.25-19.6-5.76

W=7.89 N

From the work-energy theorem, we have

W = ΔK

[tex]\rm W = \frac{1}{2} mv^2 - 0[/tex]

The speed is;

[tex]\rm v = \sqrt \frac{2 W}{m} \\\ v = \sqrt{\frac{2 \times 7.89} {5.00}}\\\\ v = 1.77 \ m/sec[/tex]

Hence, the speed after it has traveled 0.400 m up the wall will be 1.77 m/sec.

To learn more about the work-energy theorem refer to the link;

https://brainly.com/question/16995910

#SPJ1

Answer:

1.37 seconds before.... splat !

Explanation:

y = y0 + v0 t + 1/2 a t^2      y0 = 30       y = 0

                    v0 = 0 ( from rest)

                            a = - 32.2 ft/s^2

0 = 30 - 1/2 * 32.2 * t^2

t=1.366 seconds                    Note that   mass   is irrelevant.

The length of the y-component of the vector plotted below is 1 unit.

We know this because this vector can be descomposed in two vectors (blue) that form an angle of 90° beetween them. The measures of this vectors must be able to form a right-angle triangle with the descomposed vector (see image).

According to the information, it can be inferred that the best way to distribute the chairs and mirrors is to put the light system on a wall and put the 3 mirrors and chairs in front of the light as shown in the image.

To take advantage of the light from the bulb for the three chairs and the three mirrors, the objects must be placed in such a way that all three receive enough light to be able to carry out the work of cutting the hair.

So, the best option would be to put the bulb in the middle of a wall, and place a chair and mirror in front of the bulb. The other two chairs should be located one on each side of the centered chair and the mirrors in front of each chair.

Learn more about light in: https://brainly.com/question/26914812

#SPJ1

Answer:

P

Explanation:

,............................................ I have. a doubt too on D

The horizontal component of the train's speed is 5.54 m/s and the vertical component's of the train's speed is  6.85 m/s.

The horizontal component of the train's speed is calculated as follows;

Vx = V cosθ

where;

Vx = 8.81 m/s x cos(51)

Vx = 5.54 m/s

Vy = 8.81 m/s x sin(51)

Vy = 6.85 m/s

Thus, the horizontal component of the train's speed is 5.54 m/s and the vertical component's of the train's speed is  6.85 m/s.

The complete question is below:

a train travels 8.81 m/s in a -51.0 direction. the train accelerates 2.23 m/s². Find the horizontal and vertical component of the train's speed.

Learn more about horizontal speed here: https://brainly.com/question/24949996

#SPJ1

Taking into account the definition of solvent and solute, helium is the solute and oxygen is the solvent.

The solution is a homogeneous mixture of two or more components that have the same chemical and physical properties in a single phase. A solution is made up of two main components: the solute and the solvent.

That is, the solute and the solvent are the components of a chemical solution, that is, of a homogeneous mixture that occurs when one or more substances are dissolved in another substance.

The solute is the substance that dissolves in a solution. In solution, the solute is usually found in a lower proportion than the solvent.

Solvent is the substance in which a solute dissolves, resulting in a chemical solution. Generally, the solvent is the component that is found in the highest proportion in the solution. It will always be the solvent who will determine the state of the matter that will have the solution.

In this case,  you consider that the solute is the component in less quantity and the solvent is the major component.

You know that a solution made of 15 g of oxygen and 5 g of helium. Then, helium is the solute and oxygen is the solvent.

Learn more about solvent and solute:

brainly.com/question/13133789

brainly.com/question/2614077

brainly.com/question/14129775

brainly.com/question/11985826

brainly.com/question/8620871

#SPJ1

The magnetic field strength = 8.5 x 10² T.

Solution :

the magnetic force Fm is given by

Fm= q V B sinθ

q= charge=1.4 x 10⁻⁷ C

v= velocity= 1.3 x 10⁶ m/s

B= magnetic field strength

Fm= magnetic force= 1.5 x 10² N

θ=75°

so 1.5 x 10²=(1.4 x 10⁻⁷) (1.3 x 10⁶ ) (B) sin75

B=8.5 x 10² T

Magnetic field strength: The definition of H is H = B/μ − M, where B is the magnetic flux density, a measure of the actual magnetic field within a material considered as a concentration of magnetic field lines, or flux, per unit cross-sectional area; μ is the magnetic permeability; and M is the magnetization.

To learn more about magnetic field strength refer : https://brainly.com/question/18651668

#SPJ4

Answer: 8.5 × 10^2 T

Explanation: Edge2020

Answer: See below

Explanation:

Part (a):

The angular speed of the Earth can be calculated as,

[tex]\omega &= \dfrac{{2\pi }}{T}\\ \omega &= \dfrac{{2\pi }}{{\left( {23 \times 3600} \right)\left( {56 \times 60} \right) + 4}}\\ \omega &= 7.29 \times {10^{ - 5}}\;{\rm{rad/s}}[/tex]

Part (b):

The linear velocity of the object can be calculated as,

[tex]v &= \omega r\sin \theta \\ v &= \left( {7.29 \times {{10}^{ - 5}}} \right)\left( {6.37 \times {{10}^6}} \right)\sin 47^\circ \\ v &= 339.62\;{\rm{m/s}}[/tex]

Part (c):

The acceleration of the object can be calculated as,

[tex]a &= \dfrac{{{v^2}}}{{r\sin \theta }}\\ a &= \dfrac{{{{339.62}^2}}}{{6.37 \times {{10}^6}\sin 47^\circ }}\\ a &= 0.024\;{\rm{m/}}{{\rm{s}}^{\rm{2}}}[/tex]

Answer:

The reason is to allow the thermometer to respond relatively quickly, and relatively accurately. The glass contains the liquid being used in the thermometer, but if it is too thick, then it will not pass heat as quickly, and it will absorb some of the heat from whatever is being measured.

Explanation:

˙˚ʚ(´◡`)ɞ˚˙

Answer:

A^2+B^2 is the scalar product of A and B

Answer:

Scalar product is equal to the magnitude a vector a times the projection of a onto vector B,

The temperature to which it must be heated in order to fit the shaft is 73.33 ⁰C.

The temperature to which it must be heated in order to fit the shaft is calculated as follows;

[tex]\frac{\Delta L}{L} = \alpha \Delta T\\\\\Delta T = \frac{\Delta L}{\alpha L}[/tex]

where;

ΔT = (0.04)/(50 x 15 x 10⁻⁶)

ΔT = 53.3 ⁰C

T₂ - T₁ = ΔT

T₂ = ΔT + T₁

where;

T₂ = 53.3 + 20

T₂ = 73.33 ⁰C

Learn more about linear expansivity here: https://brainly.com/question/14325928

#SPJ1

Answer:

Quadrant IV

Explanation:

In Quadrant IV, x is positive, and y is negative.

Brainliest, please :)

The tension in the cable is 112.64 N and the vertical component of the force exerted by the hi.nge on the beam is 93.16 N.

Apply the principle of moment and calculate the tension in the cable;

Clockwise torque = TL sinθ

Anticlockwise torque = ¹/₂WL

TL sinθ  =  ¹/₂WL

T sinθ  =  ¹/₂W

T = (W)/(2 sinθ)

T = (21 x 9.8)/(2 x sin66)

T = 112.64 N

T + F = W

F = W - T

F = (9.8 x 21) - 112.64

F = 93.16 N

Thus, the tension in the cable is 112.64 N and the vertical component of the force exerted by the hi.nge on the beam is 93.16 N.

Learn more about tension here: https://brainly.com/question/24994188

#SPJ1

The direction of torque τ this method is mathematically given as

D=X  

Option A is correct.

Generally, the equation for torque is  mathematically given as

τ = r X F

Hence to decipher the torque direction with respect to the center of mass of the body due to force F acting on the body at a location indicated by the vector r

In conclusion, the direction of this method is

D=X   Option A.

Read more about torque

https://brainly.com/question/6855614

#SPJ1

Answer: I don't understand if it is a question

Explanation:

More than 700 people in the United States have been infected with monkeypox virus American vector: the epidemic is spreading like a snowball.

Answer:

See below

Explanation:

Vertical component of initial velocity  =  200 sin 35° = 114.72 m/s

then use position formula      a = 9.81 m/s^2

  0  = 300 + 114.72 t  -  1/2 (9.81)(t^2)

            use quadratic formula with a = - 4.905    b = 114.72   c = 300

              to find t = 25.76 seconds

To find the range

   ( horizontal distance the projectile lands from launch point)

Horizontal component of initial velocity    200 cos 35 = 163.83 m/s

 ( it flies horizontally at this speed for  25.76 seconds <==found above)

    163.83  m/s  *  25.76 s = 4220.3 meters

Answer:

Approximately [tex]31\; {\rm m\cdot s^{-1}}[/tex] assuming that there is no friction on the rollercoaster, and that [tex]g = 9.81\; {\rm m\cdot s^{-2}}[/tex].

Explanation:

Make use of the SUVAT equation [tex]v^{2} - u^{2} = 2\, a\, x[/tex], where:

If there is no friction on the rollercoaster, the acceleration of the rollercoaster would be equal in magnitude to the gravitational field strength, [tex]g[/tex]:

[tex]a = g = 9.81\; {\rm m \cdot s^{-2}}[/tex].

The initial velocity of this rollercoaster is [tex]0\; {\rm m\cdot s^{-1}}[/tex] (that is, [tex]u = 0\; {\rm m\cdot s^{-1}}[/tex]) since the rollercoaster was initially stationary. The displacement of this rollercoaster would be [tex]x = 49\; {\rm m}[/tex] (same as the height of the hill.)

Rearrange the equation [tex]v^{2} - u^{2} = 2\, a\, x[/tex] to find an expression for the final velocity [tex]v[/tex] of this rollercoaster:

[tex]\begin{aligned}v &= \sqrt{2\, a\, x + u^{2}} \\ &= \sqrt{2 \times 9.81\; {\rm m\cdot s^{-2} \times 49\; {\rm m} + (0\; \rm m\cdot s^{-1}})^{2}}\\ &\approx 31\; {\rm m\cdot s^{-1}}\end{aligned}[/tex].

The butcher should balance both the meat and 0.5 kg mass on one arm of the beam balance and 2 kg mass on the other arm of the beam balance.

A beam balance can be defined as an apparatus which comprises a lever with two (2) equal arms and a bowl (pan) that is suspended from each arm, so as to measure the mass of an object.

In this scenario, the butcher should balance both the meat and 0.5 kg mass on one arm of the beam balance and 2 kg mass on the other arm of the beam balance.

Read more on beam balance here: https://brainly.com/question/1597448

#SPJ1

A characteristic of the part of the atom marked "B” is that it has a large mass. Option B. This is further explained below.

Generally,  Atom, the lowest possible unit into which matter may be split without releasing electrically charged particles.

In conclusion, the protons and neutrons are represented by the red and white spheres, respectively. Since it indicates both protons and neutrons, the line preceding the bracket around the balls (designated A) stands in for the atom's nucleus.The mass of the "B" section of the atom is very high.

Read more about atom

https://brainly.com/question/1566330

#SPJ1

Answer:

it's b

Explanation:

i did the ed quiz

(1) The intensity of a sound wave is linearly proportional to the change in the pressure squared.

(2) You are able to hear sounds from farther away on a cool night because sound waves are refracted toward warmer air near the ground.

(3) When the trough of one wave collides at the same time & place of the crest of an identical wave, destructive interference occurs.

(4) The time taken for the heater to provide the energy is 300 secs.

(5) The total amount of heat provided to the ice sample is 7,980 cal.

(6) The amount of heat required to increase the temperature of water is 33,472 J.

The intensity of a sound wave is linearly proportional to the change in the pressure squared and inversely proportional to the density and the speed.

You are able to hear sounds from farther away on a cool night because sound waves are refracted toward warmer air near the ground.

When the trough of one wave collides at the same time & place of the crest of an identical wave, destructive interference occurs.

E = Power x Time

t = E/P

t = 60,000/200

t = 300 secs

Q = 79.8 cal/g x 100 g

Q = 7,980 cal

Q = 0.1 kg x 4184 J/kgC x (100 - 20)

When water vapor condense into liquid water, temperature = 100⁰C

Q = 33,472 J

Thus, the intensity of a sound wave is linearly proportional to the change in the pressure squared.

Learn more about intensity of sound here: https://brainly.com/question/17062836

#SPJ1

Answer:

the watt is the unit of power or radiant flax

To create a tragic past for your character, you would have to write a plot that shows a sad ending to a good story.

This refers to a type of story that has negative emotions such as sadness, death, etc.

Hence, we can see that for example, you could write about two lovers and how despite all the struggles they faced, eventually died in mysterious circumstances.

Read more about tragic stories here:

https://brainly.com/question/486440

#SPJ1

Order to ensure a message is understood requires all four option is needed.

The option will be D.All of the above.

Learn more about speaking skills here:-https://brainly.com/question/25645043

#SPJ2

The tension in the upper rope is determined as 50.53 N.

The tension in the upper rope is calculated as follows;

T(u) = T(d)+ mg

where;

T(u) = 12.8 N + 3.85(9.8)

T(u) = 50.53 N

Thus, the tension in the upper rope is determined as 50.53 N.

Learn more about tension here: https://brainly.com/question/918617

#SPJ1