a 200 kg weather rocket is loaded with 100 kg of fuel and fired straight up. it accelerates upward at 30.0 m/s2 for 30.0 s, then runs out of fuel. ignore any air resistance effects.
a) What is the rocket's maximum altitude?b) How long is the rocket in the air?c) Draw a velocity vs. time graph for the rocket from lift-off until it hits the ground.

After doing the equation the total mass is 1.53×10^-3kg .

What is the magnetic force of attraction?

Similar poles or charges will typically repel one another. Thus, the two magnets will push against one another. Repulsion is the name given to a force that causes objects to move apart from one another.

between two or more comparable or similar charges there is a force. Similar charges are attracted to one another. Charges that share a similar appearance separate. Chemical bonding is characterized by repulsive forces.

Create a formula for the magnetic force to equal the normal force, and then enter the necessary values into the expression to obtain the mass.

FN=F

mg=µo I1 I2 L÷2πr

m=µo I1 I2 L÷2πrg

 = 4π×10^-7T-m/A (15A) (15A)(0.50m)÷2π(0.0015m)(9.8m/s²)

= 1413÷0.0923×10^-7

= 1.53×10^-3kg

To learn more about magnetic repulsion force https://brainly.com/question/14945557

#SPJ4

Answer:

Below

Explanation:

Using conservation of momentum

m1v1 = m2v2

.4 (8.5)   =  (.40 + .15) v^2

6.18 m/s

The centripetal force that a child with a mass of 45 kg feel when standing 1.0 m from the outer edge of the carousel is 127.9 N.

The centripetal force of the child is the inward force that must maintain the circular motion of the child at the given point in the circular axis without falling.

Mathematically, the formula for centripetal force is given as;

Fc = ma

where;

The centripetal acceleration of the child is calculated as;

a = v²/r

where;

a = (ω²r²) / r

a = ω²r

where;

ω = 7.2 rev/min = 7.2 rev/min x 2π rad/rev x 1 min/60s = 0.754 rad/s

Fc = ma

Fc = m(ω²r)

Fc = 45(0.754² x 5)

Fc = 127.9 N

Learn more about centripetal force here: https://brainly.com/question/20905151

#SPJ1

The center of mass must be found in order to analyze issues involving the flow of matter when subjected to forces, or dynamics.

Motion is the alteration of a skin's position or orientation over time. The movements of people and animals is just one illustration of how everything in the cosmos is always moving. In addition, the fundamental building block of matter, the atom, is likewise constantly in motion.

Motion is the free flow of a body in relation to time. For instance, the fan, the carpet's dust blowing off of it, the water running from the faucet, a ball rolling about, a moving car, etc. Even just the universe is always changing.

To know more about Motion visit:

https://brainly.com/question/22810476

#SPJ4

An example of sport where shoes with a high coefficient of friction would be advantageous : rugby. This is played in deep mud and needs a high level of friction so they don't slip, so boots for this condition are big.

Rugby players play in deep mud so they need  a high level of friction so that they do not slip and fall. Therefore, boots for this condition are also big and rounded studs so they stick and sink into the ground and give grip.

In sports, high friction avoids slipping and permits grip of a surface better. This permits faster movements but, if the friction is excessive, overload is produced in joints and injuries may occur.

To know more about coefficient of friction, refer

https://brainly.com/question/14121363

#SPJ1

The magnitude of the gravitational force is 7×10⁻⁷ N

Baby weighs (m₁) 4.20 kg.

Father weighs (m₂)  100 Kg.

The gravitational force (F) between the body and the earth has a magnitude of 6.67×10⁻

The separation between them is: 0.200 m

The gravitational constant is

F=Gm₁×m₂÷ R²

F= 6.67×10⁻¹¹×4.20×100÷ (0.200)²

F= 7×10⁻⁷ N

Gravitational force: The gravitational force between any two mass-containing objects causes them to be drawn together. The gravitational force is said to as attractive because it continually seeks to unite masses rather than to drive them away. In truth, you and everything else in the universe are being pulled in different directions. It is referred to as Newton's Universal Law of Gravitation.

To know more about force visit this:

https://brainly.com/question/13191643

#SPJ4

According to the given statement [tex]\sqrt{2h}[/tex] and [tex]2\sqrt{3h}[/tex] and is the angular momentum of a hydrogen atom.

Momentum may be viewed as a body's "power" while it is moving, or the amount of force it can exert on another body. For instance, a slow-moving bowling ball might have the same acceleration as a baseball being thrown fast.

Briefing:

The angular momentum of a hydrogen atom can be defined as:

[tex]L=\sqrt{l(l+1)}h,[/tex]

where l represents the orbital quantum number which defines the subshells s, p, d, f.

To know more about momentum visit:

https://brainly.com/question/24030570

#SPJ4

Velocity is the pace and direction of an object's movement, whereas speed is the time rate at which an object is travelling along a path. In other words, velocity is a vector, whereas speed is a scalar value.

In other terms, the distance that an object travels in a unit of time is referred to as its speed. It merely takes into account the magnitude of the object and ignores its orientation. Speed is referred to as a scalar quantity. When referring to velocity, however, it is said that velocity is the rate at which displacement changes. It is a   vector quantity. Speed is a scalar measure of "how quickly an object is moving." The rate at which an object travels a distance can be thought of as its speed. A fast-moving object travels at a high speed and completes a significant distance relatively quickly. A slow-moving object with a low speed, on the other hand, travels a relatively little distance in the same length of time. Zero speed refers to an object that is not moving at all. When evaluating the velocity of an item, one must retain track of direction. It wouldn't be sufficient to merely state that something moves at 80 km/h. To fully define an object's velocity, direction information must be included. For instance, 80 km/h reflects the speed of a car travelling along a road, while 80 km/h east shows the speed of the car.

To know more about speed, visit to

https://brainly.com/question/13943409

#SPJ4

surface gravity formula

[tex]g=\frac{GM}{r^{2} }[/tex]

[tex]g[/tex] is the surface gravity in m/s²

[tex]G[/tex] is the gravitational constant 6.67408x10⁻¹¹ m³/kgs²

[tex]M[/tex]  is the mass of the object in kg

[tex]r[/tex] is the radius of the object in  m

The Earth’s mass is 5.972x10²⁴kg,

Jupiter’s mass is 1.898x10²⁷ kg,

the Earth’s radius is 6371 km,

Jupiter’s radius is 69911 km

[tex]g=\frac{6.67408X10^{-11}X5.972X10^{24} }{(6.371X10^{6} )^{2} }[/tex]

[tex]g=9.82 m/s^{2}[/tex]

[tex]g=\frac{6.67408X10^{-11}X1.898X10^{27} }{(6.9911X10^{7} )^{2} }[/tex]

[tex]g=25.92 m/s^{2}[/tex]

conclusion

[tex]\frac{25.92}{9.82} = 2.63[/tex]

the surface gravity of Jupiter is 2.63 times that of Earth.

Learn more about surface gravity here https://brainly.com/question/26403335

#SPJ1

Given the

Half the weight of an SUV

If the mass of the SUV is 2m, the mass of the car is m

An SUV can produce twice as much power as a car, or 2 F.

Experience acceleration in an SUV

;SUV=2F/2m

;SUV=F/m

car acceleration

; car = F/m

They both start with an initial velocity of zero, so after a few seconds they have the same velocity and share the same position.

speed-

Velocity is a vector representation of the displacement an object or particle experiences with respect to time. The standard unit for velocity magnitude (also called velocity) is meters per second (m/s). Alternatively, centimeters per second (cm/s) can be used to express velocity magnitude. The direction of the velocity vector can be expressed in different ways depending on the number of dimensions involved. speed

to know more about speed visit

https://brainly.com/question/15686038

#SPJ4

Answer:

8. 9×10³N/m

Explanation:

k=2U /x²

= 2(25J) / 0.075m²

=8. 9×10³N/m  

Answer:

it is a heterogeneous mixture

Explanation:

because it ha s a smooth consistancy and not a thick one.

The force required to extend or compress a spring, divided by the lengthening or shortening of the spring, is known as the spring constant.

A vertical spring with mass M that is attached steadily lowers to its equilibrium position. This causes the spring x to lengthen. Suppose the same thing was still tied to the same vertical spring, but it was allowed to fall suddenly instead.

The maximum velocity is equal to the amplitude times the angular frequency, or v max=A v max = A, since the sine function oscillates between -1 and +1. The mass is travelling toward x=+A when the maximum velocity occurs at the equilibrium location (x=0).

To know more about spring constant visit :-

https://brainly.com/question/14159361

#SPJ1

The image will still get progressively smaller as we pull the object more and more away. The focal point will draw the image's location ever-closer.

The focal point or point of focus on the axis of the a lens or mirror where parallel light rays converge or appear to split after refraction or reflection.

Contrast can be used by an artist to establish focal points in the following methods: 1) Value—A focus point will naturally develop in the area where there is the greatest disparity between light and dark. 2) Form—If a composition of geometric squares added a circle, the circle would be composition's main point.

To know more about focal point visit:

https://brainly.com/question/16188698

#SPJ4

0.017 is the probability that tab A won’t fit into slot B

Probability is related to possibility. Random event generation is the subject of this branch of mathematics. Values ​​range from 0 to 1. Probabilities are built into mathematics to predict the likelihood of certain events.

P(tab A won't fit into slot B) = P (A>B)

                                                = P( A-B > 0)

Given that, A ≈ N(30,0.5)   B ≈ N(32, 0.8)

Here,

E (A-B) = 30-32 = -2

V(A-B) = V(A) + V(B) = (0.5)² + (0,8)²

                                   = 0.89

SD (A-B) = [tex]\sqrt{0.89}[/tex]

So, (A-B) ≈ N (-2, 0.9433)

P( A-B > 0) = 1 - P(A-B ≤ 0)

= 1 - P [(A - B +2 / 0.9433) ≤ (+2 / 0.9433)]

= 1 - P (Z₁ ≤ 2.12)

= 1 - 0.98300

= 0.017

To know more about probability refer to:

https://brainly.com/question/25839839

#SPJ1

The action that best describes the camera motion in the scenes directly prior to the Old Man's Defiant hand gesture is: "Zooming in and out" (Option C)

Some interesting camera motions are:

Note that the different camera motions described above are important because they allow filmmakers to convey mood and emotion, create visual interest, and guide the audience's attention within a scene.

For example, a static shot can create a sense of calm or stability, while a handheld shot can create a sense of intimacy or instability. A panning shot can follow the action and keep the audience engaged, while a zoom shot can draw attention to a specific part of the scene.

Learn more about Camera motions:
https://brainly.com/question/28239261
#SPJ1

Full Question:

What best describes the camera motion in the scenes directly prior to the old man's defiant hand gesture?

O Static and secured on a tripod

O Moving chaotically

O Zooming in and out

O Filming at 96 frames a second

Both stars A and B will have the same brightness to the earth because luminosity is dependent on the temperature and size where A is hotter but smaller and B is bigger but colder.

There are several factors that determine the luminosity of a star namely, the size, temperature, distance and magnitude. The two main factors that determine luminosity of a star when the distance is the same are temperature and size.

When the temperature of a Star is higher than the other with equal distance from the earth the star is brighter than that with lower temperature. Also, when the size of a star is bigger, it possesses a higher surface area to absorb light and energy. This makes A and B as bright as the other.

Learn more on luminosity here: https://brainly.com/question/28332746

#SPJ1

Answer:

Centripetal acceleration: [tex]1250\; {\rm m\cdot s^{-2}}[/tex].

Resultant force on the object should be [tex]12500\; {\rm N}[/tex].

(Assuming that the speed of the object is [tex]50\; {\rm m\cdot s^{-1}}[/tex].)

Explanation:

For an object that travels along a circle path of radius [tex]r[/tex] at a speed of [tex]v[/tex], (centripetal) acceleration will be [tex]a = (v^{2} / r)[/tex].

In this example, speed is [tex]v = 50\; {\rm m\cdot s^{-1}}[/tex] while the radius of the circular path is [tex]r = 2\; {\rm m}[/tex]. The (centripetal) acceleration of this object will be:

[tex]\begin{aligned}a &= \frac{v^{2}}{r} \\ &= \frac{(50\; {\rm m\cdot s^{-1}})^{2}}{(2\; {\rm m})} \\ &= 1250\; {\rm m\cdot s^{-2}}\end{aligned}[/tex].

For an object of mass [tex]m[/tex], the resultant force to achieve acceleration [tex]a[/tex] is [tex]F(\text{net}) = m\, a[/tex]. In this example, [tex]m = 10\; {\rm kg}[/tex] while [tex]a = 1250\; {\rm m\cdot s^{-2}}[/tex]. The required resultant force will be:

[tex]\begin{aligned}F(\text{net}) &= m\, a \\ &= (10\; {\rm kg})\, (1250\; {\rm m\cdot s^{-2}}) \\ &= 12500\; {\rm kg \cdot m\cdot s^{-2}} \\ &= 12500\; {\rm N} \end{aligned}[/tex].

It is true that when weights is normally distributed, students who weigh between 60 kg and 75 kg is 476.

Mean is the average of given observations and we can calculate mean by dividing sum of observation by the total number of observation.

A standard deviation shows how much data is dispersed in relation to mean. Low deviation indicates that data are clustered and high deviation means data are scattered.

Mean weight is 70 kg and standard deviation is given 3 kg.

α1 = 75 - 70 / 3 = 1.67

α2 = 60- 70/3 = 3.33

So, P( α2- α1) = 0.9375- (1- 0.9666)

                      = 0.9371

The number = 500 ×0.9371

                     = 467

So, the statement is true.

To know more about standard deviation here

brainly.com/question/23907081

#SPJ4

In scientific notation  "thirty two micro meter" can be expressed as 3.2 x 10^-5 m.

Micrometer, often known as micron, is a unit of length in the metric system equal to 0.001 mm, or roughly 0.000039 inch. m is its symbol.

The micrometer is frequently used to gauge the size of small items like colloidal particles and bacteria. Micrometers are also used to describe extremely small distances, like the infrared radiation's wavelengths.

So, 1 micrometer = 10^-6 meter.

∴ thirty two micrometer = 32 × 10^-6 meter = 3.2 × 10^-5 meter.

Hence,  in scientific notation  "thirty two micro meter" can be expressed as 3.2 x 10^-5 m.

Learn more about micrometer here:

https://brainly.com/question/2176082

#SPJ1

1. The atomic mass of the new atom be 223. Option (d) is correct.

2. The atomic number of the new atom be 88. Option (g) is correct.

3. The symbol of the new atom be Ra.  Option (e) is correct.

4. Beta decay is demonstrated here. Option (c) is correct.

A proton inside the radioactive sample's nucleus can change into a neutron or vice versa through a process known as beta decay. Because of processes like beta decay and alpha decay, the radioactive sample's nucleus is able to get as close as practical to the optimum neutron/proton ratio.

A beta particle, which can either be an electron or a positron, is released by the nucleus during this process. Think about the potential for a proton or neutron to decay into another particle. The production of the electron and positron adheres to the law of charge conservation. Beta-decay is the outcome of weak interaction.

Learn more about Beta decay here:

brainly.com/question/25455333

#SPJ1

The acceleration of the luggage across the airport is 0.42 m/s².

The acceleration of the luggage across the airport is calculated by applying Newton's second law of motion as follows;

Mathematically, the Newton's second law of motion is given as;

F(net) = ma

where;

F - Ff = ma

where;

33.3  - 12.3  = 50a

21 = 50a

a = 21/50

a = 0.42 m/s²

Learn more about acceleration here: https://brainly.com/question/14344386

#SPJ1

The complete question is below:

Jadee pulls a piece of luggage across the airport, notices that she is lagging behind her parents and wants to catch up for a short amount of time. She pulls with a horizontal force of 33.3 N. The force due to friction for the luggage is 12.3 N and the mass of the luggage is 50.0 kg. find the acceleration of the luggage.

Answer:

35 degrees

Explanation:

The law of reflection states that the angle of incidence = to the angle of reflection

Answer:

The answer is C:

Rays will follow the law of reflection, so the angle of reflection will be 35°.

Explanation:

Answer:

Below

Explanation:

V = IR

V/R = I  

    Now you can see that if you decrease R, you will need to decrease V to have the same value of I

The peak out of phase voltage also becomes doubled with increase in frequency .

To study more about probability of collision -

https://brainly.com/question/13056041

#SPJ4

Answer:

Below

Explanation:

Usually, position is given by   x(t) =.......

 if x^2 = 3t^2 - 16t+ 8      then

    x = ( 3t^2 - 16t + 8)^1/2            ( I do not think this is what you want....but it IS what was posted)

    Velocity will be given by the derivative :   (3t-8)  / ( 3t^2-16t+ 8)^1/2

       at t = 4   this equals an imaginary number....

                            so I think your question equation is incorrect

The answer above this one used    x(t) = 3t^2-16t+8 as the position function and is likely the correct way to do it

  then velocity = dx/dt = 6t-16      at t = 4 this is 8

            the particle is stationary when this = 0 at t = 16/6 = 2.67 s   (NOT 4s as posted in the other 'verified' answer !!!!!)

   Acceleration = dv/dt = 6    

 at t= 4 the velocity would be 8  units/s    

            and the accel would be 6  units/s^2

  and when v= 0 would occur at t = 2.67 s

The conclusion about moving the boxes in Max's house is as follows: The boxes will slide more easily on the carpeted floor due to lower friction (option A).

Friction is the force that resists the relative motion or tendency to such motion of two bodies in contact.

According to this question, Max is moving boxes in his house from one room to another. Max has two different floor surfaces in his house, one carpeted and the other wood floor.

The carpeted floor will have a lesser friction than the wooden floor when moving the object. This makes it easier to move the boxes on the carpeted floor.

Therefore, option A is correct.

Learn more about friction at: https://brainly.com/question/13000653

#SPJ1

Train must move with equal speed as of platform in opposite direction i order to maintain zero relative velocity.

Velocity is the speed in which something move in a paticular Direction.

From the question it is given that

relative velocity between platform and train = 0

since relative velocity of train with respect to platform is given by

where,  is the velocity of train and  is the velocity of platform

⇒ vt = vp

since platform is always at stationary i.e.,

thus train velocity  = 0

Therefore, train does not move

If, Platform is moving then train must move with equal speed as of platform in opposite direction.

To know more about velocity click-

https://brainly.com/question/25749514

#SPJ1

if 5ev of energy is supplied to an electron with a binding energy of 2.3ev, with what kinetic energy is [tex]\Rightarrow \mathrm{KE}=5-2.3=\mathbf{2 . 7} \mathrm{eV}[/tex]

What is kinetic energy?

The energy an object has as a result of motion is known as kinetic energy in physics. It is described as the effort required to move a mass-determined body from rest to the indicated velocity. The body holds onto the kinetic energy it acquired during its acceleration until its speed changes.

Photoelectric effect: The photoelectric effect is a phenomenon where electrons are ejected from a metal surface when the light of sufficient frequency is incident on it. These ejected electrons are called photoelectrons.

- When a photon falls on the metal surface, the photon's energy is transferred to the electron.

- Some part of the energy gets utilized in removing the electron from the metal surface, and the remaining goes into giving kinetic energy for the ejected electron.

- Work function [tex](\phi)[/tex]: It is the minimum amount of energy required to cause photo-emission of electrons from a metal surface when light is incident on it.

- Einstein's Photoelectric Equation gives the relationship between work function[tex](\phi)[/tex], the kinetic energy of the emitted electron, and the energy of the photon [tex](E)[/tex]

[tex]$$E=\phi+K E$$[/tex]

Given that:

Energy of incident light, [tex]E=5 \mathrm{eV}[/tex]

Work function,[tex]$\phi=2.3 \mathrm{eV}$[/tex]

Using Einstein's Photoelectric Equation,

[tex]$$\begin{aligned}& \mathrm{E}=\phi+\mathrm{KE} \\& 5=2.3+\mathrm{KE} \\& \Rightarrow \mathrm{KE}=5-2.3=\mathbf{2 . 7} \mathrm{eV}\end{aligned}$$[/tex]

To learn more about kinetic energy visit

https://brainly.com/question/26472013

#SPJ4

Area T represents the distance travelled by the object whilst moving at a constant speed. Option (C) is correct.

The distance an object travels in a unit of time is its speed. Speed is a scalar quantity since it has simply magnitude and no direction. SI unit of speed is meter per second.

Hence, mathematically:

Speed = distance travelled/time interval.

Distance travelled = speed × time interval.

In the given graph, area T represents  constant speed × time interval. Hence, area T is equal to the distance travelled by the object moving at a constant speed.

Learn more about speed here:

https://brainly.com/question/28224010

#SPJ1