During one cycle, the sodium-potassium pump binds and moves.
1 Na+ and 2 K+.
2 Na+ and 2 K+.
2 Na+ and 3 K+.
3 Na+ and 2 K+..
3 Na+ and 3 K+

B) Carbon Dioxide

Cellular respiration is the process by which plant and animal cells break down sugars, convert them to energy, and then use them to do work at the cellular level. The purpose of cellular respiration is simple. It provides cells with the amount of energy they need to function. It would be absolutely useless if a living being could not obtain the necessary energy from food. All living things eventually die, regardless of the quality or quantity of food.

To learn more about photosynthesis click here: https://brainly.com/question/26568636

Given chemical reaction,

Glucose + Oxygen → carbon dioxide + water

Reactants : Glucose and oxygen.

Products : carbon dioxide and water.

Each chemical reaction is made up of three main components: the reactants (located on the left side of the reaction equation), the products (located on the right side of the reaction equation), and the particular reaction conditions, which are listed above or below the arrows in the middle of the reaction equation.

Combustion is one of the five fundamental types of chemical reactions, along with combination, decomposition, single-replacement, and double-replacement. You can classify a reaction into one of these groups by looking at the reactants and products of the reaction in question. It is possible for some reactions to fall into more than one category.

To know more about chemical reaction visit:

https://brainly.com/question/29039149

#SPJ1

No, the initial concentrations affect the equilibrium concentrations of reactants and the products.

The equilibrium constant does not depend on the initial concentration of reactants but depends on concentration  of various species at equilibrium .

The equilibrium constant is the ratio between the product of the molar concentrations of the products to that of the product of the molar concentrations of the reactants with each concentration term raised to a power equal to stoichiometric coefficient in the balanced chemical equation.  

If you increase the concentration of a reactant or product participated in an equilibrium, the system will absorb some of the added material and after some time the system will re establish equilibrium. When you recalculate Keq, you get the same value.

It changes with the change in the temperature.

To look more about equilibrium constant click here

brainly.com/question/10038290

#SPJ4

Empirical formula for your substance is C3H7. I'll demonstrate a different method for calculating the amount of carbon in moles.

The simplest entire number quantity of atoms from each component is the empirical formula for the compound. It is empirically determined utilizing data from experiments. For instance, while glucose has the chemical formula C 6H 12O 6, the chemical equation is CH 2O.

Molecular formulae display the quantity of each type of atom found in a molecule, while structural formulas display the simplest whole-number relationship between the atoms in a compound. Empirical formulations display the simplest whole-number relationship between the atoms in a compound.

To know more about empirical formula visit:

https://brainly.com/question/14044066

#SPJ4

6 moles of chlorine gas can be produced if 4 moles of fecl3 react with 4 moles of o2.

FeCl3+O2-->Fe2O3+Cl2  is not balanced.

We first need to balance the equation. The balanced equation:

4FeCl3 + 3O2 ==> 2Fe2O3 + 6Cl2

moles FeCl3 present =4 moles

moles O2 present = 4 moles

Since the mole ration in the balanced equation is 4 FeCl3 : 3 O2, the limiting reactant will be FeCl3.

So, moles Cl2 that can be produced = 4 moles FeCl3 x 6Cl2/4 moles                   FeCl3 = 6 moles Cl2.

What do you mean by Chlorine gas?

Chlorine gas is a greenish-yellow gas with a pungent odor that is highly toxic and corrosive. It is often used as a disinfectant and bleach in water treatment and swimming pools. Exposure to chlorine gas can cause severe irritation of the eyes, skin, and respiratory tract, and can even be fatal in large doses.

What are Moles?

Moles are a unit of measurement in chemistry used to measure the amount of a substance. The mole is defined as the amount of a substance that contains as many elementary entities (atoms, molecules, ions, etc.) as there are atoms in exactly 12 grams of carbon-12. The mole is a base unit in the International System of Units (SI) and has the symbol mol.

To know more about moles,

https://brainly.com/question/1427235

#SPJ4

6 co2 molecules required during the calvin cycle to make one molecule of glucose beacuse One carbohydrate molecule requires six rounds of the Calvin cycle to create since it contains six carbon atoms (one for each carbon dioxide molecule fixed).

What is calvin cycle?

The C3 cycle is another name for the Calvin cycle. The process by which the carbon from the carbon cycle gets fixed into sugars is a series of chemical processes. The chloroplast of the plant cell is where it takes place.

Because the main stable intermediate is the 3-carbon compound glyceraldehyde-3-phosphate, C3-type plants—so named because it is their most frequent set of carbon fixation reactions—are observed. The Calvin cycle, which best describes these reactions.

The processes of photosynthesis that utilise the energy accumulated by the light-dependent reactions to create glucose and other carbohydrates molecules are known as the Calvin cycle.

To earn more about calvin cycle

Here: https://brainly.com/question/920840

#SPJ4

The chemical compound diborane has the molecular formula B2H6 and is made up of boron and hydrogen atoms. Diborane is a highly reactive oron hydraidw, which was once a possible rocket fuel for the us space program

Boranes are the name given to compounds that contain both boron and hydrogen atoms. One of the most basic boron hydrides is diborane. Boron hydrides and air combine effectively to create explosive combinations. At normal temperature, this material will fire rapidly. Diborane also goes by the names boro ethane and diboron hexahydride.

At room temperature, pure diborane does not react with oxygen or air, but instead produces significant amounts of impure B2O3 and energy.

3O2 + B2H6 = 3O3 + 3H2O

H equals -2165 KJ mol-1.

Trimethyl Borate is produced when diborane and methyl alcohol combine.

6CH3OH + B2H6 = 2B(OCH3)3.

ΔH = -2165 KJ mol-1 – Diborane reacts with methyl alcohol to give trimethyl Borate. B2H6 + 6CH3OH → 2B (OCH3)3 + 6H2

to know more about trimethyl borate visit

https://brainly.com/question/26509389

#SPJ4

Answer:

Products: Ethyl butanoate + Water ||| C6H12O2 + H2O

This Compound is an Ester

Explanation:

So I assume that this question is an esterification question for a few reasons.

1. Since there is a Carboxylic acid and Alcohol reacting, it automatically means that it is esterification.

2. Sulphuric Acid is used as a catalyst so it won't affect this question in any way.

* Water is formed since you'd remove H from the Alcohol's Hydroxyl group, and when you remove an OH from the carboxyl group in the carboxylic acid.

Hopefully, this helped but since I don't have much context, I had to assume that you are doing Chemistry 30, Organic Chemistry.

Answer: The frequency is 7.047 Hz. It comes under ultraviolet radiation

Explanation:

We know that v = λ x f ................. (1)

where v ⇒ velocity of the wave

f ⇒ frequency of the wave

λ ⇒ wavelength of the wave

Since we know that the given wave is electromagnetic radiation,

v = 3 x 10⁸ m/s

λ = 4.257 x 10^-9 m (Given)

Substituting in (1), we get

f = v / λ

f = 3 x 10^8 / 4.257 x 10^-9

f = 7.047 x 10^16 Hz

Since the frequency is in the order of 16, the given radiation is ultraviolet radiation

To learn more about Electromagnetic radiation :

https://brainly.com/question/10429732

The statement that is correct about real machines is that work output is less then work input. So the correct option is A.

This is correct because in a real machine the production of work will never be greater than the input it has of work, since the machines themselves will lose energy in some way during the formation of the production of work. When losing energy, then, there will be less production and material than there was at the beginning of production.

This is quite the opposite in an ideal machine, where all the work that will be put in becomes the work output. It changes because in the ideal situation it does not take into account various variables that occur in reality that can cause energy to be lost in the process.

Therefore, we can confirm that the correct option is A. work output is less then work input.

To learn more about real machine visit: https://brainly.com/question/11752408

#SPJ1

Which of the following is true of real machines?

A. work output is less then work input

B. work output equals work input

C. work input is decreased because of friction

D. work output is greater than work input

The airbags that protect people in car crashes are inflated by the extremely rapid decomposition of sodium azide, which produces large volumes of nitrogen gas.

So the balanced chemical equation is:

NaN₃(s) → Na(s) + 1.5 N₂(g)

Since, pV=nRT

The mass of sodium azide = 79.3g

What is nitrogen gas?

To know more about nitrogen gas, click the link given below:

https://brainly.com/question/10069872

#SPJ4

The mass of the ammonia, given that the sample of the ammonia has a volume of 2.5 L is 3.965 g

First, we shall obtain the number of mole of the ammonia. Details below:

PV = nRT

Divide both sides by RT

n = PV / RT

n = (2.6 × 2.5) / (0.0821 × 260)

n = 0.305 mole

Now, we shall determine the mass of the ammonia. Details below:

Mole = mass / molar mass

Cross multiply

Mass = Mole × molar mass

Mass of ammonia = 0.305 × 13

Mass of ammonia = 3.965 g

Thus, we can conclude that the mass of the ammonia is 3.965 g

Learn more about mass:

https://brainly.com/question/6613610

#SPJ1

The most efficient approaches to minimize nitrate pollution of rivers are to utilize biofertilizers instead of synthetic nitrogen fertilizers or to reduce their use altogether, in farming.

What is Nitrate pollution?

Groundwater and rivers may become contaminated with nitrogen from a variety of sources. The environment naturally contains a certain amount of nitrogen, and small amounts of nitrate are essential nutrients. However, there is an issue with the high nitrate levels found in significant anthropogenic contributions such as sewage, animal waste, nitrogen-based fertilizers, agricultural runoff, and fertilizers.

What are Biofertilizers?

A biofertilizer is a substance that contains living microorganisms that, when added to soil, seeds, or plant surfaces, colonize the plant's rhizosphere and encourage growth by boosting the supply or availability of essential nutrients to the host plants.

Hence, the most efficient approaches to minimize nitrate pollution in rivers are to utilize biofertilizers.

To know more about Nitrate pollution, check out:

https://brainly.com/question/27792164

#SPJ4

The amount of heat required to raise the temperature of 225.0 g of water from 25.0°C to 100.0°C is equal to 67,837 joules.

What is temperature?
A physical quantity known as temperature expresses the concepts of hotness as well as coldness in numerical form. With a thermometer, temperature is measured. Thermometers are calibrated using a number of temperature scales which historically defined various reference points as well as thermometric substances. The most widely used scales are the Kelvin scale (K), which is primarily used for scientific purposes, the Fahrenheit scale (°F), as well as the Celsius scale (°C), formerly known as centigrade, with the unit symbol °C. In the Worldwide System of Units, one of the eight base units is the kelvin (SI).

The amount of heat, in joules, required to raise the temperature of 225.0 g of water from 25.0°C to 100.0°C can be calculated using the equation:
Q = mcΔT
where
Q = heat in joules,
m = mass of the water in grams,
c = specific heat capacity of water,
ΔT = change in temperature (100.0°C – 25.0°C = 75.0°C).

Using these values, the equation can be rearranged to:
Q = (225.0 g) (4.184 J/g°C) (75.0°C)

Therefore, the amount of heat required to raise the temperature of 225.0 g of water from 25.0°C to 100.0°C is equal to 67,837 joules.

To learn more about temperature
https://brainly.com/question/1156488
#SPJ4

The noble gas family includes the element xenon, which has five different energy levels.

Any of a class of rare gases with high stability and very low reaction rates, such as helium, neon, argon, krypton, xenon, and occasionally radon. also known as inert gas. A collection of chemical elements known as the noble gases have a number of things in common. Under typical circumstances, they are all monatomic, tasteless, and colourless gases with low chemical reactivity. Helium, neon, argon, krypton, xenon, and radioactive radon are the six types of noble gases that are found in nature. Noble gases have entirely filled outer electron shells, are most frequently encountered as monatomic gases, and have no tendency to combine with other elements. As a result, they extremely infrequently form compounds with other elements. But it is conceivable to cause a noble gas to respond, just as one might force a nobleman to lose his honor.

Due to their filled valence shells (octets), which render them incredibly nonreactive, the noble gases (Group 18), which are found at the far right of the periodic table, were formerly known as the "inert gases." Compared to other element groupings, the noble gases were characterized at a relatively late stage.

The noble gases are employed to create inert atmospheres, usually for arc welding, to shield specimens and prevent chemical reactions. The substances are utilized in lasers as well as lamps like neon and krypton headlamps.

To know more about Noble Gas visit:

https://brainly.com/question/11414033

#SPJ1

The melting ice weighs 50.3 grams. When the ice and water mixture has come to a uniform temperature of 0 °C.

Subtracting the combined mass of the cup, water, and ice cubes from the combined mass of the cup, water, and ice cubes yields the mass of the ice cubes.

where,

q = heat released

m = mass of water = 100 g

c = specific heat capacity of water = 4.186 J/g.°C

T = change in temperature = 60-100 = -40

Putting values in equation , we get:

q = 100 * 4.186 * -40

q = -16744j

Ice will absorb the heat that the water releases.

So, amount of heat absorbed by ice = -q = -(-16744) J = 16744 J

We employ the following equation to determine the reaction's enthalpy change:

H = q/m

where,

q = amount of heat absorbed = 16744 J

m = mass of ice melted = ?

H = heat of fusion = 333 J/g

Putting values in equation , we get:

333J/g = 1674/ m

m = 1674 / 333 = 50.3g

Consequently, 50.3 g of ice will have melted

To know more about  melting ice visit:-

https://brainly.com/question/3182291

#SPJ4

At standard pressure and temperature (STP), the volume of nh3 gas required for the reaction to 15.0 g of NO is 7.4 L.

The definition of a standard temperature is 0 degrees Celsius, or 32 degrees F or 273.15 degrees K. In essence, this is the temperature at which pure water will freeze at sea level in air at standard pressure.

m(NO) = 15 g; mass of nitrogen(II) oxide.

M(NO) = 30 g/mol; molar mass of nitrogen(II) oxide.

V(NH₃) = ?

n(NO) = 15 g ÷ 30 g/mol.

n(NO) = 0.5 mol; amount of nitrogen(II) oxide.

From chemical reaction: n(NO) : n(NH₃) = 6 : 4.

0.5 mol : n(NH₃) = 6 : 4.

n(NH₃) = 0.33 mol; amount of ammonia.

Vm = 22.4 L/mol; molar volume at STP.

V(NH₃) = 0.33 mol · 22.4 L/mol..

V(NH₃) = 7.4 L

To know more about standard temperature visit:

https://brainly.com/question/4519810

#SPJ4

The complete question is -

This balanced chemical equation represents a chemical reaction: 6NO + 4NH3 → 5N2 + 6H2O

What volume of NH3 gas, at Standard Temperature and Pressure (STP), is required to react with 15.0 g of NO?

The energy is required to remove a proton from ¹⁵N₇ is

The reaction to remove the proton is given as follows :

¹⁵N₇  ---->   ¹⁴C₆  +  H

The mass of ¹⁵N₇   =  15.000109

the mass of ¹⁴C₆ = 14.003242

The mass of H = 1.007825

The energy requires to remove a proton is given as:

E = ( 14.003242 + 1.007825 - 15.000109) u

E = 0.010958 × 9312.5 MeV

E = 10.2046375 MeV

Thus, energy is required to remove a proton from ¹⁵N₇ with  the masses of the atoms ¹⁵N₇ , ¹⁴C₆ and H are 15.000109 u , 14.003242 u and 1.007825 u , respectively is 10.2046375 MeV.

To learn more about proton here

https://brainly.com/question/14162227

#SPJ4

In a spectrophotometer, both absorbance and transmítanse indicate the amount of light passing through a sample. A high absorbance corresponds to a low transmittance.

What is absorbance?

It quantifies a substance's ability to absorb light of a certain wavelength. It is equal to the reciprocal of the transmittance logarithm. The amount of light that a solution absorbs, also known as optical density.

What is Transmittance?

It is the ratio of light energy that falls on a body to light energy that passes through it. In other words, it is the ratio of light passing through the sample to light incident on it, whereas reflectance is the ratio of light reflected to light incident.

In a spectrophotometer, both absorbance and transmittance indicate the amount of light passing through a sample. A high absorbance corresponds to a low transmittance.

To know more about absorbance and transmittance, check out:

brainly.com/question/14919298

#SPJ4

As, 150,000,000 km = 1 AU. To convert km to AU, divide the distance in km by 150,000,000.

In this way, we can find the distance.

What is distance?

Distance is an object's overall motion in a directionless fashion. Regardless of an object's starting or ending point, distance can be defined as the amount of ground it has travelled.

In molecular geometry, the average distance between the nuclei of two bound atoms in a molecule is referred to as bond length or bond distance.

To learn more about Distance

Here: https://brainly.com/question/71956

#SPJ4

Melting, vaporization and sublimation are changes of state that are characterized by atoms that gain energy.

What is Melting?

The physical process that causes a substance's phase to change from solid to liquid. This happens when the solid's internal energy rises, usually as a result of heat or pressure being applied, which raises the substance's temperature to the melting point.

What is vaporization?

The transformation of a substance into a gaseous (vapour) phase from its liquid or solid state. Boiling is the term for the vaporization process when conditions permit the creation of vapour bubbles within a liquid.

What is Sublimation?

The immediate transition of a material from its solid to its gas state without first going through its liquid phase is called the sublimation process.

Hence, melting, vaporization and sublimation are changes of state that are characterized by atoms that gain energy.

To know more about Vapourization, check out:

https://brainly.com/question/486624

#SPJ4

As a result, we already have one bond. We require three lone pairs of electrons for the oxygen to have a negative one formal charge.

Three unpaired electrons and one non-bonding lone pair on the oxygen can be utilized to make bonds with three hydrogen atoms.

An oxygen atom has three valence electron pairs since it has six valence shell electrons. Since oxygen creates two bonds, we know that two electrons are required to create those two bonds. There are now just two electron pairs remaining that are not involved in bonding.

There are three valence electron pairs in an oxygen since it has six valence shell electrons.

learn more about non-bonding lone pair refer

https://brainly.com/question/20355152

#SPJ4

Answer:

Thus, the second principal energy level can hold up to eight electrons, two in the s orbital and six in the p orbital. The third principal energy level has one s orbital, three p orbitals, and five d orbitals, which can each hold up to 10 electrons. This allows for a maximum of 18 electrons.

Answer:

0-1

Explanation:

An electron is a negatively charged subatomic particle, So -1 is the correct option.

8.999×10^-2 ppmv is the concentration of ppmv of CO.

Concentration is defined as amount of solute per amount of solution or solvent.

To convert from ppm by mass to ppm by volume, divide by the density of the particles.

The conc of CO = 103 mg/m³

=0.103 mg/m³ air

Molecular weight if CO = 28g/mol

Moles of CO = 0.103×10^-3 g/28g/mol

= 3.678×10^-6 mol

Calculate the volume of CO  as follows:

V=nRT/P

=3.678×10^-6 mol × 8.314 Pa m³/mol K × 298.15 / 101325 Pa

= 8.999×10^-8 m³ CO/m³ air

Convert units of V into pmv as follows

=8.999×10^-8 m³ CO/m³ air ×10^6

=8.999×10^-2 ppmv

Or 0.08999 ppmv

To know more about concentration, click on https://brainly.com/question/17206790

#SPJ4

Answer:

Relative atomic mass of uranium = (238 x 0.50) + (235 x 0.20) + (234 x 0.30) = 236.3

HOMOGENEOUS

✔️ 1. flat soda pop

✔️ 2. cherry vanilla ice cream

✔️ 3. salad dressing

✔️ 4. sugar

HETEROGENEOUS

5. soil

aluminum foil

black coffee

Homogeneous substances and mixtures are uniform in composition and have the same properties throughout. Heterogeneous substances and mixtures are not uniform in composition and can have different properties in different parts.

Flat soda pop is a homogeneous mixture because it is a uniform mixture of water, carbon dioxide gas, and various flavors and sweeteners.

Cherry vanilla ice cream is a homogeneous mixture because it is a uniform mixture of milk, cream, sugar, cherries, and vanilla flavor.

Salad dressing is a homogeneous mixture because it is a uniform mixture of oil, vinegar, and various flavors and seasonings.

Sugar is a homogeneous substance because it is a pure substance made up of molecules with the same chemical formula.

Soil is a heterogeneous mixture because it is made up of a combination of minerals, organic matter, water, and air, which can vary in composition and properties in different parts of the mixture.

Aluminum foil is a heterogeneous mixture because it is made up of thin sheets of aluminum metal mixed with other substances, such as coatings or additives, which can vary in composition and properties in different parts of the mixture.

Black coffee is a homogeneous mixture because it is a uniform mixture of water, coffee beans, and various flavors and aromas.

The classification of the substances and mixtures as either homogeneous or heterogeneous:

HOMOGENEOUS:

Flat soda pop: ✔️

Salad dressing: ✔️

Sugar: ✔️

Black coffee: ✔️

HETEROGENEOUS:

Cherry vanilla ice cream: ✔️

Soil: ✔️

Aluminum foil: ✔️

Any material or combination that is homogeneous throughout and difficult to discern with the eye is referred to as homogeneous matter. Due to their similar composition, flat soda pop, salad dressing, sugar, and black coffee are categorized as homogenous in this example.

Contrarily, heterogeneous matter describes substances or mixes that are visibly distinct and have an uneven or non-uniform composition. Aluminum foil, cherry vanilla ice cream, and dirt are all examples of heterogeneous materials since they all have distinct visible components or phases.

To know more about Heterogenous:

https://brainly.com/question/33317866

#SPJ6

If the product contain succinimide, its IR spectra should show aprominent peak at around 1700 cm-1, indicating an incomplete reaction.

Because various elements have varying quantities of protons and varied numbers and configurations of electrons, they also have different spectra. The variations in spectra are a result of the energy that atoms absorb or emit as their electrons shift between different energy levels.

Every element generates an own collection of spectral lines. A line spectrum can be used to distinguish between different elements because no two produce the same spectral lines.

To know more about spectrum visit:

https://brainly.com/question/6836691

#SPJ4

The initial moles of the HI introduced is 6.2 moles.

We know that the equilibrium constant can only be obtained from the concentration of the substance at the point of equilibrium. We would have to set up the ICE table as shown below;

            2HI ⇆  [tex]H_{2}[/tex]    +   [tex]I_{2}[/tex]

I            a           0          0

C         - x           + x       + x

E         a - x        1.8        1.8

We can see that in this case; x = 1.8 and the equilibrium constant = 1/6 = 0.17

K = [ [tex]H_{2}[/tex]  ] [ [tex]I_{2}[/tex]]/[HI]^2

0.17 = (1.8)^2/ (a - 1.8)^2

0.17 = 3.24/(a - 1.8)^2

0.17a^2  - 0.61a + 0.55 = 3.24

0.17a^2  - 0.61a - 2.69 = 0

a=6.2 M

Learn more about equilibrium constant:https://brainly.com/question/10038290

#SPJ1