Answer:
1.27atm is the pressure of the gas
Explanation:
Using combined gas law, we can find the pressure of a gas with the moles, temperature and volume of the gas. The formula is:
PV = nRT
P = nRT / V
Where P is pressure in atm
n are the moles of the gas: 4.6 moles
R is gas constant: 0.082tamL/molK
T is absolute temperature: 325K
V is volume: 96.8L
Replacing:
P = 4.6mol*0.082atmL/molK*325K / 96.8L
P = 1.27atm is the pressure of the gas
Sarah is running a race and is almost to the finish line. In the last 5 seconds, her velocity changes from 2m/s to 4m/s. What is her average acceleration during the last 5 seconds of the race?
Answer:
[tex]\boxed {\boxed {\sf a= \frac {2}{5} \ or \ 0.4 \ m/s^2}}[/tex]
Explanation:
Acceleration is found by dividing the change in velocity by the time. The formula is:
[tex]a= \frac {v_f-v_i}{t}[/tex]
where [tex]v_f[/tex] is the final velocity, [tex]v_i[/tex] is the initial or starting velocity, and [tex]t[/tex] is the time.
Her velocity changes from 2 meters per second to 4 meters per second in the 5 seconds. Therefore:
[tex]v_f= 4 \ m/s \\v_i= 2 \ m/s \\t=5 \ s[/tex]
Substitute the values into the formula.
[tex]a= \frac { 4 \ m/s- 2 \ m/s}{5 \ s}[/tex]
Solve the numerator and subtract.
[tex]a= \frac { 2 \ m/s}{5 \ s}[/tex]
Divide.
[tex]a= \frac{2}{5} \ m/s/s= \frac{2}{5} \ m/s^2[/tex]
This can also be written as a decimal.
[tex]a=0.4 \ m/s^2[/tex]
Her average acceleration during the last 5 seconds of the race is 2/5 or 0.4 meters per square second.
Answer:
Solution :-Here
Initial velocity = 2 m/s
Final velocity = 4 m/s
Time = 5 sec
v = u + at
4 = 2 + a(5)
4 - 2 = a(5)
2 = 5a
2/5 = a
Hence, acceleration is 2/5 m/s²
Why or how, do electrons receive a positive charge during beta decay?
Answer: Beta decay occurs when a nucleus is unstable because it has too many or too few neutrons relative to protons. The nucleus emits a beta particle and energy. In beta-minus decay, a neutron breaks down to a proton and an electron, and the electron is emitted from the nucleus.
Explanation:
MRI machines use extremely strong magnetic fields. These fields must be adjustable to produce high-quality images. What might these
machines use to generate such a field?
A
electromagnets
B
permanent magnets
C
induced current
the movement of carbon between the atmosphere, land, and ocean is called what?
Approximately how many formula units of NaCl are in 116.88g of table salt (NaCl), knowing that the molar mass of NaCl is 58.44g/mol?
Answer:
116.88g of table salt (NaCl) contains two formula units
Explanation:
Now,
We know that 1 formula unit of sodium chloride has a molar mass of 58.44g/mol
Hence;
Mass of 1 formula unit = 58.44g
Mass of x formula units = 116.88g
x = 116.88g * 1 formula unit/58.44g
x = 2 formula units
Therefore;
116.88g of table salt (NaCl) contains two formula units
Answer:
There are 1.2044 × 10²⁴ formula units of NaCl in 116.88 g of table salt (NaCl)
Explanation:
A formula unit is an empirical formula of the smallest collection or number of atoms in an ionic or covalent combination from which a compounds formula can be established and which are used to represent the compound stoichiometrically
Sodium chloride is an ionic compound and is represented by the formula unit NaCl as it composed of ions and is not therefoe represented by a molecular formula
The given mass of the table salt, NaCl = 116.88 g
The molar mass of NaCl = 58.44 g/mol = The mass of 1 mole of NaCl
1 mole of NaCl contains one Avogadro's number or 6.022 × 10²³ formula units of NaCl,
∴ 58.44 g of NaCl contains 6.022 × 10²³ formula units of NaCl
116.88 g of NaCl will have (116.88/58.44) × 6.022 × 10²³ = 1.2044 × 10²⁴ formula units of NaCl
The number of formula units of NaCl in 116.88 g of table salt (NaCl) = 1.2044 × 10²⁴ formula units of NaCl.
What is the name for a star that has too low of a mass to start hydrogen fusion?
А.white dwarf
B.black dwarf
C.red dwarf
D. brown dwarf
Answer:
red dwarf
Explanation:
Answer:
D
Explanation:
7. A certain hydrocarbon, CxHy, is burned (reacts with O2 gas) and produces 1.955 g of CO2 for every
1.000 g of H20. What is the empirical formula of this hydrocarbon?
CxHy + (X + y/4) O2 -> xCO2 + y/2 H2O
Answer:
The empirical formula of the hydrocarbon is C₂H₅
Explanation:
The formula for the hydrocarbon is [tex]C_xH_y[/tex]
The mass of CO₂ produced per 1,000 g of H₂O = 1,955 g
The equation for the chemical reaction is given as follows;
[tex]C_xH_y[/tex] + (x + y/4) O₂ → XCO₂ + y/2H₂O
From the given chemical equation, counting the number of atoms on both sides of the equation, we have;
The molar mass of CO₂ = 44.01 g/mol
The molar mass of H₂O = 18.01528 g/mol
The number of moles of H₂O in 1,000 g of H₂O = 1,000 g/(18.01528 g/mol) = 55.5084351 moles
The number of moles of CO₂ in 1,955 g of H₂O = 1,955 g/(44.01 g/mol) = 44.4217223 moles
Therefore, given that X moles of CO₂ is produced alongside Y/2 moles of H₂O. we have;
X = 44.4217223, Y/2 = 55.5084351
∴ Y = 2 × 55.5084351 = 111.0168702
The ratio of X to Y = X/Y = 44.4217223/111.0168702 = 0.40013488238
∴ The ratio of X to Y = X/Y ≈ 0.4 = 4/10
X/Y ≈ 4/10
The empirical formula is the representation of molecular formula in the smallest whole number ratio of the elements of the molecules
Therefore, when X = 4, Y = 10, from which we have the smallest ratio as;
When X = 2, Y = 5
The empirical formula of the hydrocarbon is therefore, [tex]C_xH_y[/tex] = C₂H₅
The given chemical equation becomes;
C₂H₅ + (2 + 5/4) O₂ → 2CO₂ + 5/2H₂O
C₂H₅ + 3.25 O₂ → 2CO₂ + 2.5 H₂O
We then have;
4C₂H₅ + 13 O₂ → 8CO₂ + 10 H₂O
The empirical formula of the hydrocarbon, [tex]C_xH_y[/tex] = C₂H₅.
The topic of stoichiometry includes all of these except
Answer:
B
Explanation:
Please Help me with number 4 I really need help please just tell me which letter is
Answer:
i believe it's D
Explanation:
Answer:
D
Explanation:
What is the concentration expressed in parts per million of a solution containing 15.0 grams of KNO3 in 65.0 grams of H2O?
Answer:
The concentration will be "[tex]1.88\times 10^5 \ ppm[/tex]".
Explanation:
The given values are:
Mass of solute (KNO₃),
= 15.0 grams
Mass of solvent (H₂O),
= 65.0 grams
The concentration will be:
= [tex]\frac{Mass \ of \ solute}{Mass \ of \ solution}\times 10^6[/tex]
On substituting the values, we get
= [tex]\frac{15.0}{65.0+15.0}\times 10^6[/tex]
= [tex]\frac{15.0}{80}\times 10^6[/tex]
= [tex]0.1875\times 10^6[/tex]
= [tex]187500 \ ppm[/tex]
or,
= [tex]1.88\times 10^5 \ ppm[/tex]
Can you help me out with gravity study!?
Awnser 4 questions only please!
Answer:
F
T
F
T
Explanation:
i hope these are right
What is the total volume of solution that was dispensed from this burette?
A. 32.3 ml
B. 32.9 ml
C. 0.6 ml
D. 32.6 ml
E. 65.2 ml
Answer:
it will a i did the quiz got it all right
Explanation:
Describe the energy in nuclear fuel and the way in which it’s converted to electrical energy. Write 50 to 100 words.
Explanation:
You will have to rewrite this in your own words please. Download the app Paraphrase and also download Plagiarism Checker. Go on Paraphrase first and write it out then go to Plagiarism second and it'll tell you if you still need to reword it.
Answer:
A nuclear reactor produces electricity in much the same way other power plants do. The chain reaction produces the energy, which turns water into steam. The pressure of the steam turns a generator, which produces electricity.
Explanation:
Nuclear energy originates from the splitting of uranium atoms a process called fission. In nuclear fission, atoms are split apart to form smaller atoms, releasing energy. Fission takes place inside the reactor of a nuclear power plant. At the center of the reactor is the core, which contains uranium fuel. The uranium fuel is formed into ceramic pellets. Inside each uranium fuel pellet, there are millions of uranium nuclei. When these nuclei are split, a huge amount of energy is released. Some of this energy is from radiation, but the biggest source is kinetic energy. This is the energy that produces heat inside a reactor. The heat produced during nuclear fission in the reactor core is used to boil water into steam, which turns the blades of a steam turbine. As the turbine blades turn, they drive generators that make electricity. Nuclear plants cool the steam back into water in a separate structure at the power plant called a cooling tower, or they use water from ponds, rivers, or the ocean. The cooled water is then reused to produce steam.
i need helpppp
blank 1:
blank 2:
blank 3:
blank 4:
Answer:
Fe₂(SO₄)₃ + 6KOH —> 3K₂SO₄ + 2Fe(OH)₃
The coefficients are: 1, 6, 3, 2
Explanation:
__Fe₂(SO₄)₃ + __KOH —> __K₂SO₄ + __Fe(OH)₃
To determine the correct coefficients, we shall balance the equation. This can be obtained as follow:
Fe₂(SO₄)₃ + KOH —> K₂SO₄ + Fe(OH)₃
There are 2 atoms of Fe on the left side and 1 atom on the right side. It can be balance by writing 2 before Fe(OH)₃ as shown below:
Fe₂(SO₄)₃ + KOH —> K₂SO₄ + 2Fe(OH)₃
There are 6 atoms of OH on the right side and 1 atom on the left side. It can be balance by writing 6 before KOH as shown below:
Fe₂(SO₄)₃ + 6KOH —> K₂SO₄ + 2Fe(OH)₃
There are 6 atoms of K on the left side and 2 atoms on the right side. It can be balance by writing 3 before K₂SO₄ as shown below:
Fe₂(SO₄)₃ + 6KOH —> 3K₂SO₄ + 2Fe(OH)₃
Now, the equation is balanced.
Therefore, the coefficients are: 1, 6, 3, 2
How do river systems, watersheds, and divides interact?
Answer:
They all end up in the oceon
Explanation:
Answer:
ok
Explanation:
i think they will all end up in ocean
What is the same for all of the drilling sites we examined?
Answer:
the same is what is this question like what did u exame
For the night yet balanced equation, No + CuCl2 —> Cu + NiCl3, if you started with 12.00 g of nickel and 42.00 g of CuCl2, how much Copper would you expect to produce Perdue
Answer:
19.45g of Cu are expect to be produced
Explanation:
Based on the reaction:
2Ni + 3CuCl2 → 3Cu + 2NiCl3
2 moles of Ni react with 3 moles of CuCl2 to produce 3 moles of Cu
To solve this question we must find the moles of each reactant in order to find the limiting reactant. With the limiting reactant we can find the moles of Cu produced and the mass as follows:
Moles Ni -Molar mass: 58.6934g/mol-
12.00g * (1mol / 58.6934g) = 0.204 moles Ni
Moles CuCl2 -Molar mass: 134.45g/mol-
42.00g * (1mol / 134.45g) = 0.312 moles CuCl2
For a complete reaction of 0.204 moles of Ni are required:
0.204 moles Ni * (3 moles CuCl2 / 2 moles Ni) = 0.306 moles of CuCl2
As there are 0.312 moles, CuCl2 is the excess reactant and Ni is limiting reactant.
Moles Cu:
0.204 moles Ni * (3moles Cu / 2 moles Ni) = 0.306 moles of Cu are produced
Mass Cu:
0.306 moles of Cu * (63.546g / mol) =
19.45g of Cu are expect to be producedplease help! What is the empirical formula for a compound that has 1 mole of nitrogen and 2.5 moles of oxygen?
Answer:
[tex]N_{2}O_{5}[/tex]
Explanation:
usually, the first step is to calculate the moles but since that is already given in the question we can move onto the next step
least molar ratio:
N = [tex]\frac{1}{1}[/tex] = 1
O = [tex]\frac{2.5}{1}[/tex] = 2.5
when the answer is in decimals we will multiply it by an integer in order to make it a whole number (in this case 2)
O = 2.5(2) = 5
in order to balance, we will also multiply the atoms of N by the same integer
N = 1(2) = 2
thus, the empirical formula is [tex]N_{2}O_{5}[/tex]
How many atoms would be contained in 454 grams of iron?
Answer:
4.90 x 10 24 atoms
Explanation:
the 24 is the exponent for the 10
2. The reaction of zinc with nitric acid was carried out in a calorimeter. This reaction caused the temperature
of 72.0 grams of liquid water, within the calorimeter, to raise from 25.0°C to 100.°С. Calculate the energy
associated with this reaction.
We want to solve Q = mcΔT for the liquid water; its change in temperature will tell us the amount of thermal energy that flowed out of the reaction. The specific heat, c, of water is 4.184 J/g °C.
Q = (72.0 g)(4.184 J/g °C)(100 °C - 25 °C) = 22593.6 J
Q ≈ 2.26 × 10⁴ J or 22.6 kJ (three significant figures).
How many poles does a magnet have?
what do elements and atoms have in common
Answer:
what they have in common is consist of electrons, protons, and neutrons.
Explanation:
As the temperature of a gas is increased, the
average kinetic energy of its molecules
A decreases
B. increases
Cremains the name
Answer:
B- Increase
Explanation:
In the event that the temperature is increased, the normal speed and dynamic energy of the gas atoms increment. In the event that the volume is held steady, the sped up the gas particles brings about more incessant and more powerful crashes with the dividers of the compartment, hence expanding the pressing factor
Complete each nuclear reaction equation.
Superscript 14 subscript 7 upper N plus superscript 4 subscript 2 upper H e right arrow superscript question mark subscript 8 upper O plus superscript 1 subscript question upper H.
Nitrogen transmutes to form an isotope of oxygen. The superscript for oxygen is?
The subscript for hydrogen is?
Superscript 59 subscript question mark upper C o plus superscript 1 subscript 0 n right arrow superscript 60 subscript 27 upper C o.
Cobalt-59 accepts a neutron to form a new isotope. The subscript for cobalt is?
Nitrogen transmutes to form an isotope of oxygen. The superscript for oxygen is 17
The subscript for hydrogen is 1
Cobalt-59 accepts a neutron to form a new isotope. The subscript for cobalt is 27
Answer:
Oxygen = 17
Hydrogen = 1
Cobalt = 27
Explanation:
describe the process of testing the pH of an unknown solution
A pH meter will make short work of identifying the pH of your solution. These meters have a glass probe that measures a solution's ion concentration. To use a pH meter, place a small portion of your solution in a beaker or test tube, rinse the probe of the pH meter, and then place the probe into your solution.
Source:
https://sciencing.com/identify-solution-neutral-base-acidic-8346.html
pH depend on the temperature. At room temperature pH scale is between 0 to 14. pH of neutral solution is 7. pH meter is the only instrument to measure the pH of an unknown solution.
What is pH?pH is a measurement of amount of hydronium ion H₃O⁺ in a given sample. More the value of hydronium ion concentration, more will be the solution acidic.
On subtracting pH from 14, we get pOH which measures the concentration of hydroxide ion in a given solution.
pH meter is used to measure the pH of an unknown solution. A glass probe is attached to pH meters, that measure the concentration of hydrogen ion in unknown solution. Take the unknown solution in the beaker and then put the washed, clean glass probe in the solution. Now wait for a second to take the reading.
Therefore, pH meter is the only instrument to measure the pH of the solution.
To learn more about pH, here:
https://brainly.com/question/27945512
#SPJ2
an equation thats shows how an objects acceleration relates to its mass
Answer:
Newton's second law of motion
F = ma
If 1.00L of water is added to 3.00 L
of a 6.00M solution of HCl, what is the
new molarity of the acid solution?
Answer:
4.5M
Explanation:
Here is why:
I'll give 50 pts and brainliest
Briefly explain the different types of mining and the processes!!
Answer:
Response is below
Explanation:
The different types of mining are underground, surface, placer, and in-situ. Underground mining uses various materials to excavate resources from beneath the surface of the Earth. Surface mining is a category of mining that in which soil and rock overlying the mineral deposit are removed. Placer mining is the mining of stream bed deposits for minerals. In-situ mining is a mining process used to recover minerals such as copper and uranium through boreholes drilled into a deposit.
Can someone please help me. Like right now please
Answer:
3rd law
Explanation:
when two objects interact, they apply forces to each other of equal magnitude and opposite direction.
Calculate the frequency in hertz of electromagnetic radiation that has a wavelength of 645.0 nm. (c = 3.00 X 10⁸ m/s)
Answer:
1/wavelength
c=1/alpha