4.5. Steel is particularly well suited for structural framing because of its relative I. strength. II. ease of fabrication. III. low cost. Iv. corrosion resistance. V. fire resistance. A.I and IV B. I and ill C. II, IV, and V D. I, II, ill, and V

Respiratory tract cilia play an important role in protecting the lungs from inhaled particles and pathogens by moving mucus and other substances out of the airways. The answer is b. Carbon dioxide

Ozone is a highly reactive gas that can damage lung tissue and impair ciliary function. Nitrogen dioxide is a toxic gas produced by burning fossil fuels that can cause inflammation and damage to the respiratory tract. Sulfur dioxide is also a byproduct of burning fossil fuels and can cause respiratory problems by irritating the lungs and impairing ciliary function. Carbon dioxide is a normal component of the atmosphere and is not known to have any negative effects on ciliary function.

Sulfur dioxide is also a byproduct of burning fossil fuels and can cause respiratory problems by irritating the lungs and impairing ciliary function. On the other hand, carbon dioxide is a normal component of the atmosphere and is not known to have any negative effects on ciliary function.

Learn More About Carbon dioxide

https://brainly.com/question/27424775

#SPJ11

In the [tex]Sn_{2}[/tex] (substitution nucleophilic bimolecular) reaction, the nucleophile attacks the substrate and replaces a leaving group. The rate of the reaction depends on the concentration of the nucleophile and the substrate, as well as other factors such as temperature and solvent.

If different amounts of nucleophile are added to each test tube, it introduces another variable into the reaction, which can affect the rate of the reaction and the outcome. For example, if more nucleophile is added to one test tube than another, the reaction may proceed faster in the tube with the higher concentration of nucleophile. This can make it difficult to compare the results of the reaction between the different test tubes, and can affect the validity of the experiment.

By using the exact same amount of nucleophile in each test tube, the only variable that changes is the substrate concentration, which is the same in each test tube. This allows for a more controlled experiment, where the only difference between the test tubes is the substrate concentration. This makes it easier to compare the results of the reaction between the different test tubes and draw meaningful conclusions about the relationship between substrate concentration and reaction rate.

To know more about nucleophile

brainly.com/question/30713995

#SPJ11

The name of each compound by using the Stock system is; Lithium bromide (LiBr), Tin(IV) nitrate (Sn(NO₃)₄), Iron(III) oxide (Fe₂O₃), and Chromium(II) fluoride (CrF₂).

The Stock system, also known as the Stock naming convention or Stock notation, is a way of naming chemical compounds that uses Roman numerals to denote the oxidation state or ionic charge of the metal or cation in the compound. The Roman numeral is placed in parentheses after the name of the metal or cation.

For example, iron can exist in two different oxidation states in a compound, Fe(II) and Fe(III). In the Stock system, these compounds would be named Iron(II) and Iron(III), respectively.

This system is commonly used for transition metals and their compounds, where the metal can have multiple oxidation states. The Stock system provides a clear and unambiguous way to specify the oxidation state of the metal, which is important for understanding the properties and reactivity of the compound.

To know more about Stock system here

https://brainly.com/question/31567840

#SPJ1

When it comes to the frequency of snow in urban areas, it's important to note that it can vary depending on the location and climate.

However, in general, urban areas tend to experience less frequent snowfall compared to rural or suburban areas. This is due to the urban heat island effect, which causes urban areas to be warmer than surrounding areas, making it harder for snow to accumulate.  Warmer temperature can result in precipitation falling as rain instead of snow, leading to a decrease in snow frequency in urban areas. Nonetheless, snow can still occur in urban areas, and it's important for residents to be prepared for winter weather conditions.

learn more about temperature Refer: https://brainly.com/question/29072206

#SPJ11

The test method that best determines chemical feed/dosage rates is the Jar test.

The best test method to determine chemical feed/dosage rates is a.) Jar test. This method involves simulating the coagulation, flocculation, and sedimentation processes in a controlled environment to determine the optimal dosage of coagulants or other treatment chemicals.

The jar test is used to determine the correct dosage of chemicals to be added to water or wastewater in order to remove tiny particles. Surface water sources including lakes, rivers, and reservoirs or groundwater well supplies both provide raw drinking water. Surface water frequently includes a lot of suspended particles, which gives it the appearance of being turbid, but groundwater usually tends to be relatively clear. Particulates are frequently to blame for some of the issues with colour, flavour, and odour that are connected to raw water supplies. For reuse or to recover valuable materials from the trapped particles, industrial effluent may be processed for particulate removal.

To know more about test method click here:

https://brainly.com/question/31381685

#SPJ11

The solubility product, ksp = 2.58 x 10^-2 mol^3/L^3.

Solubility product refers to the equilibrium constant for the dissolution of a sparingly soluble compound in water. In other words, it is a measure of the extent to which a solid compound will dissolve in water.

The solubility product constant (Ksp) for zinc acetate, Zn(CH₃COO)₂, is given by the following equation:

Zn(CH₃COO)₂ ⇌ Zn²⁺ + 2CH₃COO⁻

The Ksp expression for this reaction is:

Ksp = [ Zn²⁺][CH₃COO⁻]^2

To determine the Ksp of zinc acetate, we need to know the concentration of  Zn²⁺and CH₃COO⁻ ions in a saturated solution. Since the solubility of zinc acetate is 43.0 g/L, we can assume that a saturated solution contains 43.0 g of zinc acetate per liter of water.

The molar mass of zinc acetate is:

MZn(CH₃COO)₂ = (1 x 65.38 g/mol Zn) + (2 x 12.01 g/mol C) + (6 x 1.01 g/mol H) + (4 x 16.00 g/mol O)

= 183.48 g/mol

The number of moles of zinc acetate in a liter of saturated solution is:

moles(Zn(CH₃COO)₂) = 43.0 g / 183.48 g/mol = 0.2344 mol/L

Since zinc acetate dissociates into one  Zn²⁺ ion and two CH₃COO⁻ ions, the concentration of  Zn²⁺ ions in the saturated solution is:

[ Zn²⁺] = 0.2344 mol/L

The concentration of CH₃COO⁻ ions is twice the concentration of  Zn²⁺ ions:

[CH3COO-] = 2 x [ Zn²⁺] = 2 x 0.2344 mol/L = 0.4688 mol/L

Therefore, the Ksp of zinc acetate is:

Ksp = [ Zn²⁺][CH₃COO⁻]^2

= (0.2344 mol/L)(0.4688 mol/L)^2

= 0.0258 mol^3/L^3

Expressing this answer in scientific notation, we get:

Ksp = 2.58 x 10^-2 mol^3/L^3

Learn more about moles here:

https://brainly.com/question/26416088

#SPJ1

If simple distillation was carried out after the azeotropic distillation, the major product that would be separated is the pure component of the mixture.

Simple distillation is a process that is commonly used to separate a mixture of liquids based on the differences in their boiling points. During the process, the mixture is heated, and the component with the lowest boiling point will vaporize first, leaving behind the component with the higher boiling point.

In the case of azeotropic distillation, the process involves the addition of a third component that forms an azeotrope with the two main components of the mixture. This azeotrope has a boiling point lower than that of the individual components, making it difficult to separate them using simple distillation. However, by performing azeotropic distillation first, it is possible to break down the azeotrope and obtain a higher purity of the individual components.

For more such questions on simple distillation, click on:

https://brainly.com/question/29576788

#SPJ11

The highest home radon concentration levels are most likely to be found in: c. Basements

Radon is a radioactive gas that comes from the natural decay of uranium in soil, rock, and water. It typically moves up through the ground and into homes through cracks and other holes in the foundation. Basements are closest to the ground and have more direct contact with the soil, which leads to higher radon concentration levels compared to other areas of the home.Radon gas enters homes through the foundation and accumulates in damp, low-lying areas such as basements, crawl spaces, and other areas with poor ventilation. Upstairs halls, dining areas, and near windows are not typically areas where radon gas concentrations are high.

learn more about concentration Refer: https://brainly.com/question/29072206

#SPJ11

The contaminant in water that is associated with methemoglobinemia is nitrate.

Methemoglobinemia is a condition caused by elevated levels of nitrate in drinking water, which can lead to a decrease in oxygen levels in the blood. Nitrates can enter drinking water sources through fertilizer runoff and sewage contamination. It is important to test drinking water regularly to ensure nitrate levels are not elevated.Methemoglobin is an abnormal form of hemoglobin, the protein that carries oxygen in red blood cells. High levels of nitrate can interfere with the normal oxygen-carrying capacity of red blood cells, leading to symptoms such as shortness of breath, fatigue, dizziness, and blue skin discoloration.

learn more about nitrate Refer: https://brainly.com/question/5346392

#SPJ11

The statement that is NOT true about complex II is: 2. The electrons pass from [tex]FADH_2[/tex] to [tex]Fe^{+3}[/tex] to cytochrome b to CoQ.

This statement is actually describing the electron transfer process in complex III, not complex II. In complex II, the electrons are transferred from succinate to [tex]FADH_2[/tex], then to an iron-sulfur protein, and finally to CoQ. Unlike complex I, complex II does not pump protons during electron transfer. In complex I, the electrons are passed from NADH to ubiquinone (CoQ), and protons are pumped across the membrane. In complex II, however, the electrons are passed from [tex]FADH_2[/tex] to [tex]Fe^{+3}[/tex] to cytochrome b to CoQ, and no protons are pumped across the membrane. Therefore, the electrons do not flow toward CoQ in the same way as they do in complex I.

To learn more about electrons click here https://brainly.com/question/28977387

#SPJ11

In the reaction of an alkyl bromide with sodium iodide in acetone, the resulting alkyl iodide may be attacked by a bromide ion due to a possible nucleophilic substitution reaction. During the initial reaction, the sodium iodide reacts with the alkyl bromide to form an alkyl iodide and sodium bromide.

However, if there is excess alkyl bromide present, the resulting alkyl iodide may undergo a second substitution reaction with the excess alkyl bromide acting as the nucleophile. This can occur because the alkyl iodide is still reactive and can be attacked by the bromide ion, which is also present in the reaction mixture. The resulting product would be a mixed alkyl halide containing both iodine and bromine.

Find out more about alkyl bromide

brainly.com/question/31412665

#SPJ11

The concept of chemical leavening involves the reaction between an acid and a base to produce carbon dioxide gas, which causes dough or batter to rise.

The general equation for this reaction is:
Acid + Base → Salt + Water + Carbon Dioxide
In baking, the acid and base are often present in the form of ingredients like baking soda (a base, or more specifically, sodium bicarbonate) and an acidic compound like cream of tartar, vinegar, or lemon juice.
Here's a simple example using baking soda and vinegar:
NaHCO₃ (baking soda) + CH₃COOH (vinegar) → NaCH₃COO (sodium acetate) + H₂O (water) + CO₂ (carbon dioxide)
The carbon dioxide gas produced during this reaction helps the dough or batter to rise, creating a light and fluffy texture in the final baked product.

learn more about Carbon Dioxide Refer: https://brainly.com/question/3049557

#SPJ11

Answer: aspartate and glutamate

Explanation:there is the answer your welcome

The factor that might cause a decrease in the size of hooks in the fish hook population over time is ant queens form colonies with smaller hook sizes are more likely to successfully mate and form new colonies. The correct option to this question is C.

For more information on natural selection kindly visit to

https://brainly.com/question/2725702

#SPJ1

An invert in distribution refers to the lowest point inside a pipe where water flows. In this context, the correct answer is: c) The bottom of the pipe

An invert in distribution refers to the lowest point inside a pipe where water flows. In this context, the correct answer is: c) The bottom of the pipe

We refer to the distribution of a random variable X's reciprocal, 1/X, as its inverted distribution. The inverted distribution of some random variable, especially of X = 1/Y, where Y is distributed according to G, is every distribution G that assigns probability 0 to the value 0.

An inverse distribution is the distribution of a random variable's reciprocal in probability theory and statistics. In the Bayesian framework of prior distributions and posterior distributions for scale parameters, inverse distributions are particularly prevalent. Inverse distributions are particular examples of the class of ratio distributions in the algebra of random variables, when the numerator random variable has a degenerate distribution.

An invert in distribution refers to the elevation at which the bottom of a pipe or conduit intersects with a channel or other outlet. Therefore, the answer is c) the bottom of the pipe.

To know more about invert click here:

brainly.com/question/30512214

#SPJ11

Answer:To calculate the maximum mass of C₂H4O that can safely be present in a room with a volume of 3.00 x 10^5 L, we need to convert the concentration limit of 8.17 x 10^-6 M to mass. The molar mass of C₂H4O is 44.06 g/mol. Therefore, the maximum mass of C₂H4O that can safely be present in the room is:

8.17 x 10^-6 M x 44.06 g/mol x 3.00 x 10^5 L = 10.9 g

So, the maximum mass of C₂H4O that can safely be present in the room is 10.9 g.

A sugar molecule can form a cyclic-hemiacetal through a reaction between its alcohol and aldehyde functional groups.

A sugar forms a cyclic-hemiacetal by reaction between an alcohol and an aldehyde.

Step 1: Identify the alcohol and aldehyde functional groups within the sugar molecule.
Step 2: The reaction occurs when the hydroxyl group (alcohol) reacts with the carbonyl group (aldehyde).
Step 3: The oxygen atom in the hydroxyl group forms a bond with the carbon atom in the aldehyde.
Step 4: A water molecule is eliminated in the process, and a cyclic-hemiacetal structure is formed.

In summary, a sugar molecule can form a cyclic-hemiacetal through a reaction between its alcohol and aldehyde functional groups.

To know more about sugar molecule:

https://brainly.com/question/1793238

#SPJ11

The term that is defined as the ability to do work is called "energy." All atoms possess energy, which allows them to perform various functions and interact with other atoms.

Energy is the term that is defined as the ability to do work. Energy is a fundamental concept in physics and refers to the capacity of a system or object to perform work or cause a change. It can exist in various forms, such as kinetic energy (energy of motion), potential energy (stored energy), thermal energy (heat), chemical energy (energy stored in chemical bonds), and many other forms

Learn more about energy here:

https://brainly.com/question/1932868

#SPJ11

The preferred minimum roof pitch for the installation of asphalt roll roofing is C. 3:12.

This pitch ensures proper water drainage and helps to prevent leaks, providing better overall performance for your asphalt roll roofing. Asphalt roll roofing is a type of roofing material that is commonly used on low-slope roofs. It is made from asphalt-saturated felt that is coated with a layer of asphalt and then surfaced with mineral granules.

While asphalt roll roofing can be installed on roofs with a pitch as low as 1:12, the preferred minimum pitch is 3:12. This pitch helps to ensure that water drains off the roof properly and does not accumulate or pond on the surface of the roofing material. It also helps to prevent the material from becoming damaged or deteriorating prematurely due to standing water.

To learn more about asphalt, refer:-

https://brainly.com/question/29589497

#SPJ11

13C NMR analysis could determine whether the oxidation of isoborneol to camphor was successful by comparing the chemical shift of the carbonyl carbon in the starting material and product.

The carbon atoms in Isoborneol and camphor have different chemical environments, which result in different chemical shift values. For example, Isoborneol has a tertiary carbon, which typically has a chemical shift value of around 35 ppm, while camphor has a carbonyl carbon, which typically has a chemical shift value of around 200 ppm.

Therefore, comparing the chemical shift values of the carbons in Isoborneol and camphor can confirm whether the oxidation was successful and whether the expected product, camphor, was obtained.

Learn more about carbon atoms

https://brainly.com/question/2544405

#SPJ4

Full Question: The 1H NMR spectrum of camphor is complex, so we won't use that for characterization. Instead, consider the structures of starting material (Isoborneol) and product (camphor) and describe how 13C NMR analysis could determine whether your oxidation was successful

1. To separate  water, oil and milk we use centrifugation. This is because of the different density that each component has. It will separate all there according to their density.

2. For blood we use centrifugation. We spin the blood at high speed to separate various component of the blood.

3. The mixture of  iron pellets, sand, dirt and rocks separated using Magnetic separation, sieve and evaporation. Magnet will be used to pick out all the iron pellets. Sieve to separate rocks from smaller particles. flotation to separat dirt from sand.

Centrifugation is a very effective method for separating water, oil, and milk due to their differing densities.

It is done By spinning the mixture at high speeds. When that happens the different components will seprate based on their density, with the denser components settling to the bottom and the lighter one rising to the top.

Find more exercises on centrifugation;

https://brainly.com/question/17611911

#SPJ1

The correct answer is c. Iron. Red water problems are primarily caused by the presence of iron in the water, which can cause discoloration and an unpleasant taste and odor.

Iron Red water problems are primarily due to the presence of iron in the water. When iron is oxidized, it forms insoluble reddish-brown particles that can cause staining and other issues. Hardness refers to the concentration of dissolved minerals like calcium and magnesium in water, while turbidity refers to the cloudiness or haziness of water caused by suspended particles. Hydrogen sulfide is a gas that can cause a rotten egg odor in water.

Learn more about water here:

brainly.com/question/12167508

#SPJ11

Magnesium hydroxide can be taken to relieve the symptoms of heartburn. The atomic number of magnesium is equal to 12.

Magnesium hydroxide is commonly used to relieve the symptoms of heartburn, which is caused by stomach acid irritating the esophagus. Heartburn can be a result of consuming certain foods, stress, or medical conditions. Magnesium hydroxide works as an antacid by neutralizing the excess stomach acid, thus providing relief from the discomfort associated with heartburn.

The atomic number of an element represents the number of protons in the nucleus of its atoms. In the case of magnesium, its atomic number is 12. This means that magnesium atoms have 12 protons in their nucleus, giving the element its unique chemical properties.

As a compound, magnesium hydroxide (Mg(OH)2) is formed when magnesium ions (Mg2+) react with hydroxide ions (OH-). In this reaction, magnesium hydroxide acts as a base that neutralizes the excess hydrochloric acid (HCl) present in the stomach. The result of this neutralization is the formation of water (H2O) and magnesium chloride (MgCl2), which are harmless substances that do not cause irritation.

For more such questions on Magnesium hydroxide, click on:

https://brainly.com/question/14877043

#SPJ11

The initial volume of the chlorine gas container was approximately 753.03 mL. Therefore, the initial volume of the chlorine gas container was approximately 760.6 ml.

To solve this problem, we can use Boyle's law which states that at constant temperature, the product of pressure and volume is constant. This can be written as P1V1 = P2V2, where P1 and V1 are the initial pressure and volume, and P2 and V2 are the final pressure and volume.

We are given P1 = 684 mmHg, P2 = 996 mmHg, V2 = 520.1 ml. We need to find V1.

Using Boyle's law, we can write:

P1V1 = P2V2

Substituting the given values, we get:

684 V1 = 996 × 520.1

Solving for V1, we get:

V1 = (996 × 520.1) / 684

V1 ≈ 760.6 ml

Therefore, the initial volume of the chlorine gas container was approximately 760.6 ml.

To solve this problem, you can use Boyle's Law, which states that for a gas at constant temperature, the product of the initial pressure (P1) and initial volume (V1) is equal to the product of the final pressure (P2) and final volume (V2). In formula form: P1V1 = P2V2.

Given the information in the problem:
P1 = 684 mm Hg
P2 = 996 mm Hg
V2 = 520.1 mL

You need to find the initial volume, V1. Rearrange the formula to solve for V1:

V1 = (P2 * V2) / P1

Substitute the given values:

V1 = (996 mm Hg * 520.1 mL) / 684 mm Hg

V1 ≈ 753.03 mL

So, the initial volume of the chlorine gas container was approximately 753.03 mL.

Visit here to learn more about Boyle's law  : https://brainly.com/question/1437490
#SPJ11

A cross-connection is defined as a connection between a potable water system and a source of contamination. Option C is correct.

A cross-connection refers to a physical connection or arrangement between a potable water system (i.e., a system that provides water that is suitable for drinking, cooking, and other domestic uses) and a potential source of contamination.

This can occur when there is a connection between a potable water supply and a non-potable source such as a contaminated water system, industrial process, irrigation system, or other sources which may introduce contaminants into the drinking water supply.

Cross-connections pose a risk of contaminating the potable water supply and can potentially lead to waterborne diseases or other health hazards. Therefore, it is essential to properly manage and prevent cross-connections to ensure the safety and quality of drinking water.

Hence, C. is the correct option.

To know more about cross-connection here

https://brainly.com/question/31559171

#SPJ1

The statement "Polyatomic ions that contain oxygen attached to some other element are called oxoanions or oxyanions." is True because polyatomic ions contain oxygen as one of their constituent atoms, and are therefore known as oxoanions or oxyanions.

Polyatomic ions are ions that are composed of two or more atoms covalently bonded together, carrying an overall charge due to the loss or gain of one or more electrons. Many of these polyatomic ions contain oxygen as one of their constituent atoms, and are therefore known as oxoanions or oxyanions.

Oxoanions are formed by the combination of a central atom with one or more oxygen atoms and are typically named according to their structure and charge. For example, the sulfate ion ([tex]SO4^{2-[/tex]) contains a central sulfur atom bonded to four oxygen atoms, while the nitrate ion ([tex]NO_3^-[/tex]) contains a central nitrogen atom bonded to three oxygen atoms.

The naming convention for oxoanions depends on the number of oxygen atoms in the ion and their relative charge. If the ion has fewer oxygen atoms, then the prefix "hypo-" is added to the name, while if the ion has more oxygen atoms, the prefix "per-" is used. For example, the chlorite ion ([tex]ClO_2^-[/tex]) contains one less oxygen atom than the chlorate ion ([tex]ClO_3^-[/tex]), while the perchlorate ion ([tex]ClO_4^-[/tex]) contains one more oxygen atom than the chlorate ion.

Overall, oxoanions play an important role in chemistry, as they are involved in a wide range of chemical reactions and are important constituents of many compounds, including acids, bases, and salts.

For more question on Polyatomic ions click on

https://brainly.com/question/30388328

#SPJ11

The complexation of Cu₂ by NH₃ has a negative effect on the half-cell potential of Cu₂.

The complexation of Cu₂ by NH₃ to produce [Cu(NH₃)₄]₂ has an effect on the half-cell potential of Cu₂. The formation of the complex shifts the equilibrium towards the formation of the complex, resulting in a decrease in the concentration of Cu₂. This leads to a decrease in the half-cell potential of Cu₂. Additionally, the complexation of Cu₂ by NH₃ stabilizes the Cu₂ ion, making it less likely to participate in redox reactions, further decreasing the half-cell potential. Therefore, the complexation of Cu₂ by NH₃ has a negative effect on the half-cell potential of Cu₂.

Learn more about complexation at

https://brainly.com/question/31315365

#SPJ11

the change in Gibbs energy is 5.2 J/mol, and the reaction is non-spontaneous under these conditions.

To calculate the change in Gibbs energy, we can use the equation:

ΔG = ΔH - TΔS

ΔH - change in enthalpy,

ΔS - change in entropy,

T - temperature in Kelvin.

at 188 K, ΔH = 2380 J/mol and ΔS = 12.6 J/mol K

ΔG = (2380 J/mol) - (188 K)(12.6 J/mol K)

ΔG = 2380 J/mol - 2374.8 J/mol

ΔG = 5.2 J/mol

The positive value of ΔG indicates that the reactants are more stable than the products and that energy must be added to the system to drive the reaction forward.

Therefore, the change in Gibbs energy is 5.2 J/mol, and the reaction is non-spontaneous under these conditions.

Learn more about Gibbs free energy

https://brainly.com/question/9179942

Natural disaster victims should be provided with 1 to 3 gallons of water per day. So, the correct answer is option a.

Natural disaster victims should be provided with 1 to 3 gallons of water per day. This is because access to clean drinking water is essential for survival and can become limited or contaminated during natural disasters. While some populations may be able to survive without water for short periods of time, it is important to prioritize providing adequate water to disaster victims to prevent dehydration and related health issues. 1 to 3 litres of water should be given to victims of natural disasters each day. This is due to the fact that having access to clean drinking water is crucial for survival and that it may be scarce or tainted in the event of a natural disaster.

To know more about Natural disaster click here:

https://brainly.com/question/2479021

#SPJ11

the initial rate of a reaction doubles as the concentration of one of the reactants is quadrupled. 1.41 is the order of this reactant

The initial rate of the reaction doubles as the concentration of one of the reactants is quadrupled. To determine the order of this reactant, we can use the formula:
rate = k × [reactant]n
where rate is the reaction rate, k is the rate constant, [reactant] is the concentration of the reactant, and n is the order of the reactant.
Given that the rate doubles when the concentration is quadrupled, we can set up the following equation:
2 × (k ×[reactant]n) = k ×(4 × [reactant])n
By simplifying, we find that n = 1/2. Thus, the order of this reactant is 1/2 (also called half-order).
If a reactant has an order and the concentration of that reactant increases by a factor of two, the initial rate will change according to the order. In this case, since the order is 1/2:
new rate = k × (2 × [reactant]) 1/2)
This results in the new rate being multiplied by √2 (approximately 1.41). So, the initial rate will increase by a factor of around 1.41 when the concentration of the reactant doubles.

Learn more about concentration here

https://brainly.com/question/13872928

#SPJ11