Answer:
1.12M
Explanation:
The initial concentration of the HCl solution is 3.99M. You are doing 2 dilutions:
In the first you take 326mL and dilute the solution to 976mL; that means you are diluting the solution:
976mL / 326mL = 2.99 times.
The concentration of this solution is:
3.99M / 2.99 = 1.33M
Now, in the second dilution, you take 100mL of the diluted solution and dilute it to 119mL. The concentration of this final solution is:
119mL / 100mL = 1.19 times.
1.33M / 1.19 =
1.12MThe final concentration of hydrochloric acid present is 1.11 M.
In the first dilution;M1V1 = M2V2
M2 = 3.99 M × 326 ml/976 ml
M2 = 1.33 M
In the second dilution:
M1V1 = M2V2
M2 = 1.33 M × 100.00 ml/119 ml
M2 = 1.11 M
Hence, the final concentration of hydrochloric acid present is 1.11 M.
Learn more about serial dilution: https://brainly.com/question/2167827
15.0 g of water is heated from 5 °C up to 37 °C. How much energy is absorbed by
the water? (The specific heat of liquid water is 4.184 J/g °C.)
Answer:
See the answer
1) 15.0 g of water is heated from 5 °C up to 37 °C. How much energy is absorbed by the water? (The specific heat of liquid water is 4.184 J/g°C.)
2)How many joules of energy is required to bring a five-pound (1 pound = 454 g) bag of ice from its freezer temperature at -20.0°C up to 0°C? The specific heat of ice is 2.10 J/g×°C.
3) A 50.0 mg tissue sample is taken from a patient for diagnosis. While waiting for testing, the sample is stored in a -80.0°C freezer. How much energy is released when the sample is cooled from 20.0°C down to the freezer temperature? You may assume the specific heat of the tissue sample is 3.47 J/g×K.
A non-conservative force acting on a particle:_________.
A) does work that can depend on the path of motion.
B) does work equal to the change in the kinetic energy of the particle.
C) does work that is never equal to the change in kinetic energy of the particle.
D) can not have an associated potential energy function.
E) does work that only depends on the endpoints of the path, not on the path between the endpoints.
Answer: Option A.
does work that can depend on the path of motion.
Explanation:
A non-conservative force acting on a particle does work that can depend on the path of motion because a non conservative force is a type of force that can remove energy from a progressive system and this energy cannot be restored back and the forces are path dependent because it matters where the particle begin or end.
It is a type of force such as friction or air resistance. This type of force does work that only depend on the path of motion.
Draw an important resonance form to show the delocalization of charge in the ion shown below.
Interactive 3D display mode
Answer:
Hello attached below is the missing ion diagram
Explanation:
Attached below is an important resonance form that shows the delocalization of charge in the ion shown
write the number in scientific notation 1123
what is biotic?check all that apply
Answer: biotic is Living things in their ecological relations.
Explanation:
A beaker can hold 200 cm3 of water. When it's empty, how
many liters are needed to refill it?
L
Answer:
[tex]V=0.200L[/tex]
Explanation:
Hello,
In this case, since the volumetric capacity of the beaker is 200 cm³, by considering that 1000 cm³ equals 1 L, the liters are then computed via the following unit conversion:
[tex]V=200cm^3*\frac{1L}{1000cm^3}\\ \\V=0.200L[/tex]
Best regards.
28 Which of the following equations does not represent a redox reaction?
A
B
с
D
2AgBr (s) → 2Ag (s) + Br2 (g)
Cu2+ (aq) + Zn (s) → Cu (s) + Zn2+ (aq)
2Fe (s) + 3Cl2 (9) ► 2FeCl3 (s)
MgO (s) + 2HCl (aq) → MgCl2 (aq) + H20 (1
Answer:
The answer is D. In the reactions A,B and C the reactants undergo changes in oxidation number. And also the reaction D is an acid_base neutralization reaction.
What is a single covalent bond?
Answer: Single Covalent Bonds
Hydrogen and chlorine coming together is an example of a single covalent bond. Two hydrogen atoms will also come together to form a single covalent bond, as will two chlorine atoms. In these examples, each individual atom has just one unpaired electron to share with the other atom.
A Little Backstory I Guess: In chemistry, a single bond is a chemical bond between two atoms involving two valence electrons. That is, the atoms share one pair of electrons where the bond forms. Therefore, a single bond is a type of covalent bond.
sorry its so long :/ hope this even relatively helps...
A. The measured pH of a 0.100 M HCl solution at 25 degrees Celsius is 1.092. From this information, calculate the activity coefficient of H+.B. The measured pH of a solution of 0.010 HCl and 0.090 KCl at 25 degree Celsius is 2.102. Calculate the activity coefficient of H+ in this solution.C. Why does the pH change in part B relative to that in part A?
Answer:
activity coefficient [tex]\mathbf{\gamma =0.809}[/tex]
activity coefficient [tex]\mathbf{\gamma = 0.791}[/tex]
The change in pH in part A = 0.092
The change in pH in part B = 0.102
Explanation:
From the given information:
pH of HCl solution = 1.092
Activity of the pH solution [a] = [tex]10^{-1.092}[/tex]
[a] = 0.0809 M
Recall that [a] = [tex]\gamma[/tex] × C
where;
[tex]\gamma[/tex] = activity coefficient
C = concentration
Making the activity coefficient the subject of the formula, we have:
[tex]\gamma = \dfrac{[a]}{C}[/tex]
[tex]\gamma = \dfrac{0.0809 \ M}{0.100 \ M}[/tex]
[tex]\mathbf{\gamma =0.809}[/tex]
B.
The pH of a solution of HCl and KCl = 2.102
[a] = [tex]10^{-2.102}[/tex]
[a] = 0.00791 M
activity coefficient [tex]\gamma = \dfrac{0.00791 \ M}{0.01 \ M}[/tex]
[tex]\mathbf{\gamma = 0.791}[/tex]
C. The change in pH in part A = 1.091 - 1.0 = 0.092
The change in pH in part B = 2.102 -2.00 = 0.102
You have two compounds that you have spotted on the TLC plate. One compound is more polar than the other. You ran the TLC plate with neat hexanes and found that only one spot moved a small distance up the plate. What might you expect to see if you ran a TLC plate in a 50/50 mixture of hexanes and ethyl acetate
Answer:
we will except an increase in the polarity of the system and this will cause the Non-polar spot to be near the solvent front, while the polar spot will run at an approximate speed of 0.5 Rf
Explanation:
when we run a TLC plate in a 50/50 mixture of hexanes and ethyl acetate we will except an increase in the polarity of the system and this will cause the Non-polar spot to be near the solvent front, while the polar spot will run at an approximate speed of 0.5 Rf
The speed of the polar spot depends largely on the level of polarity, an increase in the polarity will see both spots of Neat hexane run when we run a TLC plate in a 50/50 mixture of hexanes and ethyl acetate
Chromium(III) oxide reacts with hydrogen sulfide (H2S) gas to form chromium(III) sulfide and water: Cr2O3(s) + 3H2S(g) → Cr2S3(s) + 3H2O(l) To produce 156 g of Cr2S3, (a) how many moles of Cr2O3 are required? mol (b) how many grams of Cr2O3 are required? g
Answer:
(a) 0.779 mol Cr₂O₃
(b) 118 g Cr₂O₃
Explanation:
Step 1: Convert 156 g Cr₂S₃ to moles
Cr Molar Mass - 52.00 g/mol × 2 = 104.00 g/mol
S Molar Mass - 32.07 g/mol × 3 = 96.21 g/mol
156 g Cr₂S₃ ÷ 200.21 g/mol = 0.779182 mol Cr₂S₃
Step 2: Find conversion from Cr₂S₃ to Cr₂O₃
1 mol Cr₂S₃ equals 1 mol Cr₂O₃
Step 3: Use Dimensional Analysis
0.779182 mol Cr₂S₃ · [tex]\frac{1 \hspace{2} mol \hspace{2} Cr_2O_3}{1 \hspace{2} mol \hspace{2} Cr_2S_3}[/tex] = 0.779182 mol Cr₂O₃
0.779182 mol Cr₂O₃ ≈ 0.779 mol Cr₂O₃ (3 significant figures)
Step 4: Convert moles to grams
Cr Molar Mass - 52.00 g/mol × 2 = 104.00 g/mol
O Molar Mass - 16.00 g/mol × 3 = 48.00 g/mol
0.779182 mol Cr₂O₃ · 152.00 g/mol = 118.436 g Cr₂O₃
118.436 g Cr₂O₃ ≈ 118 g Cr₂O₃ (3 significant figures)
Identify the type of chemical reaction taking place in the following and write in balanced equation from
a) Barium Chloride mixed with copper sulphate solution and a white precipitate is observed b) On heating green colour sirf ferrous sulphate crystals reddish brown solid left and smell of gas having order of burning sulphur is produced.
Answer:
a. The balanced chemical equation is written below and this is a type of double displacement reaction.
Explanation:
When barium chloride reacts with copper sulfate, a white precipitate of barium sulfate is observed.
The chemical equation for the reaction of barium chloride and copper sulfate follows:
b.
2FeSO4--(heat)---> Fe2O3 + SO2+ SO3
This Reaction is an example of Thermal Decomposition Reaction.
KCl is an ionic salt with a formula weight of 74.54 g/mole. A 1.417 M (mole/liter) KCl solution has a density of 1064.5 grams/liter at 20.0 OC. Use the Molarity and the formula weight to find the mass (g) of salt in one liter. Then, find the mass (g and kg) of water in one liter of the solution as the difference between the solution mass and the KCl mass. Include the conversion factor. Determine the molality (m), or moles of salt per kg of water, by dividing the moles of salt in one liter by the kg of water in one liter. Show all units and use proper significant figures. (
Answer:
Mass of the salt: 105.6g of KCl.
Mass water: 958.9g of water.
Molality: 1.478m.
Explanation:
Mass of the salt:
In 1L, there are 1.417 moles. In grams:
1.417 moles KCl * (74.54g / mol) = 105.6g of KCl
Mass of the water:
We can determine the mass of solution (Mass of water + mass KCl) by multiplication of the voluome (1L and density 1064.5g/L), thus:
1L * (1064.5g / L) = 1064.5g - Mass solution.
Mass water = 1064.5g - 105.6g = 958.9g of water
Molality:
Moles KCl = 1.417 moles KCl.
kg Water = 958.9g = 0.9589kg.
Molality = 1.417mol / 0.9589kg = 1.478m
Which set of elements has 4 valence electrons?
Answer:
carbon group
All the carbon group atoms, having four valence electrons, form covalent bonds with nonmetal atoms; carbon and silicon cannot lose or gain electrons to form free ions, whereas germanium, tin, and lead do form metallic ions but only with two positive charges.
The set of elements that has 4 Valence electrons are the carbon group.
What are valence electrons?Valence electrons are those electrons that are found at the outermost shell of an element that can go into formation of chemical bonds with another element on a chemical reaction.
The group 14 elements in the periodic table are known to have a four Valence electron on their outermost shell.
Learn more about atom here:
https://brainly.com/question/26952570
#SPJ6
Observations made during an experiment are called
A cube has an edge length of 9 cm .
If it is divided up into 1-cm cubes, how many 1-cm cubes would there be?
Answer:
9^3 i think so like 279
Explanation:
blah
Please help asap!! Need help for problem #2.
Naturally occuring iron, contains 5.82% ^54Fe, 91.66% ^56Fe, 2.19% ^57Fe, and 0.33% ^58Fe. The reslective atomic masses are 53.940 amu, 55.935 amu, 56.935 amu and 57.933 amu. Calculate the average atmoic mass of iron. (show work)
Answer:
55.56 amu
Explanation:
Let A, B, C and D represent the four isotopes of iron.
The following data were obtained from the question:
Isotope A (Fe-54):
Mass of A = 53.940 amu
Abundance (A%) = 5.82%
Isotope B (Fe-56):
Mass of B = 55.935 amu
Abundance (B%) = 91.66%
Isotope C (Fe-57):
Mass of C = 56.935 amu
Abundance (C%) = 2.19%
Isotope D (Fe-58):
Mass of D = 57.933 amu
Abundance (D%) = 0.33%
Average atomic mass =.?
The average atomic mass of the iron can obtained as follow:
Average atomic mass = [(mass of A × A%)/100] + [(mass of B × B%)/100] + [(mass of C × C%)/100] + [(mass of D × D%)/100]
Average atomic mass = [(53.940 × 5.82)/100] + [(55.935 × 91.66 )/100] + [(56.935 × 2.19)/100] + [(57.933 × 0.33)/100]
= 2.848 + 51.270 + 1.247 + 0.191
= 55.56 amu
Therefore, the average atomic mass of the iron is 55.56 amu
The solubility of sugar at 50°C is 260/100g water,and at 0°Cis 180g/100g water. What mass of sugar,will be deposited if 60g the saturated solution at 50°C is cooled to 0°C
Explanation:
27 °0 bc that how it is so this is the answer
If a boy was standing on his head, his mouth would be ___ to his nose.
Answer:
The correct answer is "inferior".
Explanation:
In anatomy, the term inferior is used to describe parts of the body that are below other part used as reference. Inferior comes from the Latin "inferus" that means "below". In this case, the mouth will always be inferior to the nose, it doesn't matter if the boy was standing on his head or if he is in other position.
Answer:
correct answer, inferior.
Explanation:
of little or less importance, value, or merit always felt inferior to his older brother. 2a : of low or lower degree or rank. b : of poor quality : mediocre. 3 : situated lower down : lower.
If one person is regarded as inferior to another, they are regarded as less important because they have less status or ability. He preferred the company of those who were intellectually inferior to himself.
Hope this helped!
7. What happen if we don't have water?
Answer:
our bodies will dehydrate causing us to die a dreadfully excruciating painful death
Which of these is a chemical property?
boiling point
odor
ability to rust
color
Answer:
ability to rust
Explanation:
i'm like 90% sure thats correct
How many atoms are represented by one formula unit of aluminum carbonate A12(CO2)3
Answer:
well ,if I have done my sum rights there are
14 atom in the one formula unit of aluminium carbonate.
Answer:
14 atoms
Explanation:
what is formed when polyatomic ions bond with other ions.
A) ionic compounds.
B) neutral compounds.
C) ionic elements.
D) neutral elements.
Answer:
iconic compounds is your anwser
Answer:
Iconic Compounds
Explanation:
I watched a video about it.
Have a nice Friday!
What is the solubility product expression for Zn3(PO4)2?
Answer:
[tex]Ksp=[Zn^{2+}]^3[PO_4^{3-}]^2[/tex]
Explanation:
Hello,
In this case, since the equilibrium dissociation of zinc phosphate is:
[tex]Zn_3(PO_4)_2(s)\rightleftharpoons 3Zn^{2+}(aq)+2(PO_4)^{3-}(aq)[/tex]
Due to the fact that only the zinc and phosphate ions are in aqueous state, the solubility product expression is written considering the law of mass action in which the concentration of each species is powered to the corresponding stoichiometric coefficient as follows:
[tex]Ksp=[Zn^{2+}]^3[PO_4^{3-}]^2[/tex]
Best regards.
Can you help me answer the question ?
3. The 2 in 1s2 represents the number of
located in that energy level.
Answers:
electrons
protons
Answer:
electrons
Explanation:
In an atom, you can have varying numbers of electrons, depending on if its an ion or not. You can use the orbitals to see the energy level of the atom.
An atom has only one number of protons. The number of protons cannot vary.
How does the number of valence electrons in atoms of metalloids explain why metalloids are semiconductors? They have one or two valence electrons, so they cannot lose electrons easily. They have one or two valence electrons, so they can lose or gain electrons. They have three to six valence electrons, so they cannot lose electrons easily. They have three to six valence electrons, so they can lose or gain electrons.
Answer:
They have three to six valence electrons, so they can lose or gain electrons.
Explanation:
Here, we are required to identify how the number of Valence electrons on atoms of metalloids explain why metalloids are semiconductors.
This is because; They have three to six valence electrons, so they can lose or gain electronsMetalloids are elements in the periodic table which are characterized by the the presence of 3 to 6 Valence electrons.
Metalloids unlike Alkali and alkali earth metals (which have 1 and 2 Valence electrons and are highly electropositive) and halogens( with valency of 7 and are highly electronegative) have three to six valence electrons and are therefore able to lose or accept electrons.Ultimately, the presence of three to six Valence electrons and the ability to either lose or gain electrons is the criteria for their semiconductor character.
Read more:
https://brainly.com/question/2708814
Which pair of elements have chemical properties that are most similar
[tex]\text{Hello there! :)}[/tex]
Answer:
[tex]\large\boxed{(B)}[/tex]
Elements on the periodic table that are the closest in characteristics are in the same group, or column.
Looking at the answer choices, the only two pairs of elements that are in the same group are (B) Al and Ga, as well as (D) F and I.
On the periodic table, Al (Aluminum) and Ga (Gallium) are only one period (row) away from each other, while F (Flourine) and I (Iodine) are 3 periods away.
***Periods determine the number of energy levels and other properties, so elements that are closer to each other would have more similar properties.
Therefore, Aluminum and Gallium contain the most similar chemical properties.
Sample of carbonate rock is a mixture of CaCO3 and MgCO3. The rock is Analyzed in a laboratory and the results are recorded in the table above. Which columns in a table provide all the information necessary to determine the mole ratio of analyzed in a laboratory and the results are recorded in the table above. Which columns in a table provide all the information necessary to determine the mole ratio of Ca to Mg in the rock
Answer:
You need the mass of Mg and Ca in the sample and their molar masses
Explanation:
Its the only answer that made sense because using those 4, can give you their ration
The Columns in the table that provides the information necessary for the calculating the mole ratio of Ca to Mg are columns ; 3, 4, 6, and 7
Although some data related to your question is missing attached below is the missing data
Determining the mole ratio of Ca to Mg
Ca : Mg
mass of Ca / molar mass : mass of Mg / Molar mass
( 36.1 / 40.1 ) : ( 2.4 / 24.3 )
9.14 : 1
∴ The mole ratio of Mg to Ca
≈ 1 : 9
Where: Column 3 = Mass of Mg in the sample ( g )
Column 4 = mass of Ca in the sample ( g )
Column 6 = Molar mass of Mg ( g/mol )
Column 7 = molar mass of Ca ( g/mol )
Hence the Mole ratio of Mg to Ca = 1 : 9
learn more : https://brainly.com/question/15371665
3. Diesel fuel has a density of 0.839g/mL What is the volume, in gallons, of 2.3 kg of diesel? [1 gallon = 3.79 L)
Answer:
0.71 gal
Explanation:
Step 1: Given data
Density of Diesel (ρ): 0.839 g/mL
Mass of Diesel (m): 2.3 kg
Step 2: Convert "m" to grams
We will use the relationship 1 kg = 10³ g.
2.3 kg × (10³g/1 kg) = 2.3 × 10³ g
Step 3: Calculate the volume (V) of the Diesel sample
We will use the density formula.
ρ = m/V
V = m/ρ
V = 2.3 × 10³ g/(0.839 g/mL)
V = 2.7 × 10³ mL
Step 4: Convert "V" to L
We will use the relationship 1 L = 10³ mL.
2.7 × 10³ mL × (1 L / 10³ mL) = 2.7 L
Step 5: Convert "V" to gal
We will use the relationship 1 gal = 3.79 L.
2.7 L × (1 gal/3.79 L) = 0.71 gal
Answer:
2.3 kg x1000 g/kg = 2300 g
2300 g x 1 ml/0.839 g = 2741 ml
2741 ml x 1 L/1000 ml = 2.741 L
2.741 L x 1 gal/3.79 L = 0.72 gallons
Explanation: