Answer:
thik kamm Kar aur TEJ mat ban
What is hybridization plsssss help,i will give brainliest to de person who explains well
Answer: the process of an animal or plant breeding with an individual of another species or variety
Explanation:
there you go
Answer:
In chemistry, orbital hybridization (or hybridization) is the concept of mixing atomic orbitals into new hybrid orbitals (with different energies, shapes, etc., then the component atomic orbitals) suitable for the pairing of electrons to form chemical bonds in valence bond theory.
Explanation:
just copied it :|
PLS ANSWER ASAP!! I PROMISE I'LL GIVE YOU BRAINLIEST!!
A water-skier is pulled behind a boat by a rope that is at an angle of 13° and has a tension of 490 N. The water-skier has a mass of 49 kg.
What are the magnitudes of the x- and y- components of the tension?
What is the normal force acting on the skier?
Answer:
normal force= 480.2 x component=477.4 y component= 110.4
Explanation:
I'm sorry I just did this today in class but i think normal force has to be equal to mg or the mass * gravity of the person and that would be 480.2 newtons. I multiplied 9.8 (gravity) by the mass of 49g
I think for the x and y components you can make a triangle with the angled string and then use sohcahtoa to solve for the tension. I used cos(13) = x/490 to solve for x component and then I used the pythagoran theroem to get the remaining side which would be : a^2 + 477.4^2 = 490^2
hope this can help and that it is correct. good luck
The magnitudes of the x- and y- components of the tension is 477.44N and 110.23N
The normal force acting on the skier is 480.2N
The magnitude of the x- and y- components of the tension is expressed as:
x = Tcos 13°y = T sin 13°Given the following
Tension T = 490N
x = 490 cos13° = 477.44N
y = 490sin13° = 110.23N
Hence the magnitudes of the x- and y- components of the tension is 477.44N and 110.23N
The normal force acting on the skier is equal to the weight.
N = W = mg
N = W = 49 * 9.8
N = W = 480.2N
Hence the normal force acting on the skier is 480.2N
Learn more on force here: https://brainly.com/question/12970081
What are the relationships between the different wave properties (frequency, wavelength, wave speed, period, amplitude)
Ex) As ___ increases, ___ increases/decreases/remains the same.
Answer:
As frequency (cycles per second) increases the wavelength decreases.
As frequency increases the period also decreases
If wave speed or velocity increases, so too does the frequency
Amplitude of a wave is totally independent of frequency, period etc. So it remains the same as frequency shifts. Like FM radio the amplitude remains the same as the frequency of the broadcast modulates.
Explanation:
F= 1/t Frequency is inversely proportional to time (wavelength)
Period is the time it takes for one wave cycle to complete Period is 1/f
++++++++++++++++++++++++++++++++++++
vw=λT Speed of propagation vw= wavelength x T time
vw=fλ Knowing frequency multiply times wavelength to get wave speed.
++++++++++++++++++++++++++++++++
Amplitude varies only as the energy applied varies. Like transmission power, in a 60 hz power feed the amplitude can be 120, 230, 460 volts (note these nominal amplitudes are RMS root mean squared or .707 of the peak of the waveform).
See link below, images are much easier to process, than plain text of course. Hope this helps.
Oops not allowed to post a link, it appears. so try the snippet of URL as attached.
Answer:
Im no expert buh its Wave length. :)
Explanation:
Im taking a test about it hope it helps.
What force is responsible for crushing or collapsing stars?
O nuclear fusion
O gravity
energy
O forces
Answer:
Explanation:
Gravity is the correct answer
Where on the periodic table are the anions of ionic bonds found?
a . Anions are the negatively charged nonmetals on the right side of the periodic table
b. Anions are the negatively charged metals on the right side of the periodic table
c. Anions are the positively charged nonmetals on the left side of the periodic table
d. Anions are the positively charged metals on the left side of the periodic table
answer:
b.
explanation:
ik its right trust me <3
cause metals on the left and in the center of the periodic table form ionic bonds with nonmetals on the right of the periodic table.
Help with this review pls!!
Answer:
The 2 forces are a Push and a Pull
Mass is the resistance of change in speed or position when adding force.
Weight is the force of gravity
Tension Force is the pulling force transmitted through a string cable or chain. The formula for this is T = mg + ma.
It gives the particle the same acceleration as all those actual forces together as described by the Newton's second law of motion.
An unbalanced force is when there is 2 forces on opposites of an object both are adding force but one side is stronger than the other.
Friction is a force that heats things up. This happens when we rub our hands together and the heat that is generated from the friction makes our hands warmer.
Static friction is what keeps the box from moving without being pushed, and it must be overcome with a sufficient opposing force before the box will move. Kinetic friction (also referred to as dynamic friction) is the force that resists the relative movement of the surfaces once they're in motion.
how does a meteor transfer energy?
Answer:
Hope this answered your question!~ (Sorry if you get it wrong or I got it wrong-)
Explanation:
When an impact event happens, the enormous kinetic energy of the asteroid or meteorite – a massive body travelling at high speed – is partly transferred to the Earth but largely converted into heat and sound, creating pressure waves travelling radially outwards from its centre, similar to that of an atom bomb.
~The Confuzzeled homan
tony walks at an average speed of 70m/min from home to school. If the difference between his home and the school is 2100 m, how much time does it take for Tony to walk to school?
Which quantity is a vector?
displacement
distance
A woman who is a carrier for hemophilia marries a man who does not have the disease. If the couple has a daughter, what are the chances that their daughter would have hemophilia? (Hint: Use a Punnett square to determine the answer.)
A. 0 percent
B. 25 percent
C. 50 percent
D. 75 percent
Answer:
There is a 0% chance the daughter will have the disease (unless the husband is a carrier). There is a 50% chance she will be a carrier (assuming the husband is not a carrier).
Hope this helps :)
Explanation:
Pls help
Tarnish is produced by a redox reaction that occurs when a metal reacts with a nonmetallic compound. The black tarnish on a silver dish might be produced by a reaction between silver and hydrogen sulfide. What occurs during this reaction?
A. Silver atoms lose electrons to sulfur atoms.
B. Silver atoms gain electrons from sulfur atoms.
C. A double-replacement reaction takes place
D. An acid-base reaction takes place.
Answer:
A. Silver atoms lose electrons to sulfur atoms
Explanation:
:p
Answer:
AA
Explanation:
im talking about this qeastion
Answer:
a. Winter.
Explanation:
Answer:
Winter
Explanation:
what is the answer?!
Why is carbon so important to living things on earth
Answer:
It helps planet earth to survive
Explanation:
Although much less abundant than nitrogen and oxygen in Earth's atmosphere, carbon dioxide is an important constituent of our planet's air. A molecule of carbon dioxide (CO 2) is made up of one carbon atom and two oxygen atoms. Carbon dioxide is an important greenhouse gas that helps to trap heat in our atmosphere.
What is the net force required to accelerate a 5.3 kg box at a rate of 4.2 m/s^2?
Answer:
The answer is 22.26 NExplanation:
The force acting on an object given the mass and acceleration we use the formula
force = mass × accelerationFrom the question
mass = 5.3 kg
acceleration = 4.2 m/s²
We have
force = 5.3 × 4.2
We have the final answer as
22.26 NHope this helps you
2. True or false. As a wave travels through a given material its velocity changes.
Answer:
the answer is false
Explanation:
A wave travels at a constant velocity through a given material.
Two curves on a highway have the same radii. However, one is unbanked and the other is banked at an angle θ. A car can safely travel along the unbanked curve at a maximum speed v0 under conditions when the coefficient of static friction between the tires and the road is 0.563. The banked curve is frictionless, and the car can negotiate it at the same speed v0. Find the angle θ of the banked curve.
Answer:
θ = 29.38°
Explanation:
The centripetal force is given by the formula;
F_c = F_n(sin θ) = mv²/r
Now, the vertical component of the normal force is; F_n(cos θ)
Now, this vertical component is also expressed as; F_n(cos θ) = mg
Thus, the slope is;
F_n(sin θ)/F_n(cos θ) = (mv²/r)/mg
tan θ = v²/rg
v² = rg(tan θ)
The initial speed will be gotten from the relation;
(v_o)² = μ_s(gr)
Plugging rg(tan θ) for (v_o)², we have;
μ_s(gr) = rg(tan θ)
rg will cancel out to give;
μ_s = (tan θ)
Thus, θ = tan^(-1) μ_s
μ_s is coefficient of static friction given as 0.563
θ = tan^(-1) 0.563
θ = 29.38°
Study the motion map shown. Some of the vectors have been circled. A long black arrow pointing right labeled x. Above that are 5 green arrows of the same length pointing right, positioned end to end. Next to these are 2 shorter green arrows, each with small yellow arrows pointing left just above that are circled. Farther up from the line is a point. Much farther above that are 3 green arrows each longer than the previous. Above the green arrows are 3 yellow arrows of equal length pointed left, each circled. What do the circled vectors represent? distance speed velocity acceleration
Answer:
The object starts away from the origin and then moves toward the origin at a constant velocity. Next, it stops for one second. Finally, it moves away from the origin at a greater constant velocity.
Explanation:
Sample Response: The object starts away from the origin and then moves toward the origin at a constant velocity. Next, it stops for one second. Finally, it moves away from the origin at a greater constant velocity.
What did you include in your description? Check all that apply.
The object starts away from the origin.
The object moves toward the origin at a constant velocity.
The object stops for one second.
The object moves away from the origin at a greater constant velocity.
The circled vectors represent speed.
What is speed?
The is the ratio of distance traveled to time of motion. Speed is a scalar quantity because it has only only magnitude.
From the map, as the magnitude (size) of the green arrows changes, the size of the circled arrows changes accordingly.
Also, the direction of the circled arrow was constant for both top and bottom arrows.
Velocity changes with direction BUT speed does not change with direction, and has a complete meaning with only magnitude.
Thus, the circled vectors represent speed.
Learn more about speed here: https://brainly.com/question/6504879
How to raise the awareness water saving
Answer:Lead by an example
Practice what you preach. You'll never convince anyone to conserve water if you aren't doing it yourself.
Engage with others.
Seek out allies.
Give people a reason to save.
Provide entry-level strategies.
Encourage others to challenge themselves.
Think big.
Choose a monthly focus.
Is nitrogen a compound
Answer:
Nitrogen gas (N2) is a molecule because the bond between the nitrogen atoms is a molecular bond. Water (H2O) is a molecular compound because it is a substance made from more than one kind of element that is held together with molecular bonds
Explanation:
A book with a mass of 1.5 kg rests on the edge of a desk 0.75 m above the
floor. Given that the acceleration due to gravity is 9.8 m/s2, what is the book's
potential energy?
apex
Answer:
11.03 J
Explanation:
did it on a p e x
One Newton equals .225
What voltage produces a current of 100 amps with a resistance of 50 ohms?
Answer:
To find the Voltage, ( V ) [ V = I x R ] V (volts) = I (amps) x R (Ω)
To find the Current, ( I ) [ I = V ÷ R ] I (amps) = V (volts) ÷ R (Ω)
To find the Resistance, ( R ) [ R = V ÷ I ] R (Ω) = V (volts) ÷ I (amps)
To find the Power (P) [ P = V x I ] P (watts) = V (volts) x I (amps)
Explanation:
good price
Answer:
what is it
Explanation:
help? :(
A 9,300 kg. a railroad car traveling at a velocity of 15m/s strikes a second boxcar at rest. If the two cars stick together and move off with a velocity of 6m/s, what is the mass of the second car?
Answer:
m2 = 13950 [kg]
Explanation:
To solve this problem we must use the principle of conservation of linear momentum, which is defined as the product of mass by velocity, and can be determined by means of the following expression:
P = m*v
where:
P = lineal momentum [kg*m/s]
m = mass [kg]
v = velocity [m/s]
Now that momentum is conserved, we need to analyze the conditions before the collision and after the collision. In this way we must propose the following equation:
ΣPbefore = ΣPafter
(m1*v1) + (m2*v2) = (m1+m2)*v3
where:
m1 = mass of the railroad car = 9300 [kg]
v1 = velocity of the railroad car before the collision = 15 [m/s]
m2 = mass of the box car [kg]
v2 = velocity of the boxcar before the collision = 0 (the car is at rest)
(m1 + m2) = combined mass of the cars, they stick together after the collision [kg]
v3 = combined velocity of the cars after the collision = 6 [m/s]
(9300*15) + (m2*0) = (m1+m2)*6
139500 = (6*9300) + 6*m2
83700 = 6*m2
m2 = 13950 [kg]
The mass of the second railroad car which was initially at rest is 13950kg.
Given the data in the question;
Mass of railroad car1; [tex]m_1 = 9300kg[/tex]Initial velocity of railroad car1; [tex]u_1 = 15m/s[/tex]Mass of railroad car2; [tex]m_2 = \ ?[/tex]
Since railroad car2 was initially at rest,
Initial velocity of railroad car1; [tex]u_2 = 0[/tex]After the strike, the wo cars stick together and moved
Final velocity of both railroad car1 and 2; [tex]v = 6m/s[/tex]To determine the mass of the second railroad car, we use conservation of linear momentum:
[tex]m_1u_1 + m_2u_2 = (m_1 + m_2 )v[/tex]
We substitute our given values into the equation
[tex](9300kg * 15m/s) + ( m_2 * 0 ) = ( 9300kg + m_2 )6m/s\\\\9300kg * 15m/s = ( 9300kg + m_2 )6m/s\\\\139500kg.m/s = 55800kg.m/s + ( m_2 * 6m/s )\\\\139500kg.m/s - 55800kg.m/s = m_2 * 6m/s\\\\83700kg.m/s = m_2 * 6m/s\\\\m_2 = \frac{83700kg.m/s}{6m/s} \\\\m_2 = 13950kg[/tex]
Therefore, the mass of the second railroad car which was initially at rest is 13950kg.
Learn more: https://brainly.com/question/3919957
What is the distance between two spheres (20 kg and 30 kg) attracted by a force of 2 x 10^-5 Newtons.
find the difference between the actual values of the two sixes in the number 6036
Which of the following statments does not represent the relationship between culture and one's moral reasoning?
A.
Cultures generally differ in what behaviors are considered appropriate.
B.
One's thought and beliefs are generally independent of cultural influences.
C.
Many cultures value an individual's rights and well-being when establishing moral standards.
D.
Many cultures consider situational influences when judging one's behavior as right or wrong.
The only option that does not represent the relationship between culture and one's moral reasoning is one's thought and beliefs are generally independent of cultural influences.
What is culture?Culture can be defined as the people's way of life. It is an umbrella term which encompasses the social behavior and norms found in human societies.
Moral reasoning is the process by which people apply their thought or make judgment in analyzing issues and making decisions.
Thus, the only option that does not represent the relationship between culture and one's moral reasoning is one's thought and beliefs are generally independent of cultural influences.
Learn more about culture here: https://brainly.com/question/25010777
What is the wave velocity if the wave length is 100 cm and the frequency is 2 Hz?
Answer:
velocity = 2m/s
using v=fΠ
convert 100 CM to m
Answer:
200 cm per second
Explanation:
The equation for wave velocity=wavelength x frequency, since the wavelength is 100 and the frequency is two, the equation would be 100 x 2, which equals 200. Therefore, the correct answer is 200 cm per second.
what is induced current
Answer:
tu sala chutiya hai madarchod haramiA spacejet travels 800 miles/h .how long does it take to travel 1km