Why would a chiral starting material yield a 50:50 mixture of enantiomers when it undergoes Sn1?

A. the Krebs (citric acid) cycle.

Acetyl coenzyme A is a key molecule in the Krebs cycle, also known as the citric acid cycle. In this cycle, acetyl coenzyme A is combined with oxaloacetate to form citrate, which undergoes a series of chemical reactions that ultimately produce ATP, the energy currency of the cell. Glycolysis, electron transport, and oxidative phosphorylation are other metabolic pathways that also produce ATP but do not directly involve acetyl coenzyme A.

To know more about the Krebs cycle, click here:-

https://brainly.com/question/13153590

#SPJ11

The balanced chemical equation for the reaction described is:

[tex]2 LiOH _{(s)}+ H_2SO_4_{(aq)} - > Li_2SO_4_{(aq)} + 2 H_2O_{(l)}[/tex]

This equation shows that two moles of solid lithium hydroxide (LiOH) react with one mole of sulfuric acid to produce one mole of lithium sulfate and two moles of water.

An aqueous solution of sulfuric acid and solid lithium hydroxide pellets undergoes a chemical reaction that is represented by the above equation. Lithium sulfate and water are the results of the process.

The balanced equation's coefficients show the reaction's stoichiometry. One mole of lithium sulfate and two moles of water are created when two moles of lithium hydroxide combine with one mole of sulfuric acid. In terms of the number of moles, this indicates that the ratio of the reactants and products is 2:1:1:2, respectively.

The law of conservation of mass, which dictates that the sum of the masses of the reactants and products must be equal, is likewise observed by the balanced equation. This is accomplished by guaranteeing that each element has the same amount of atoms.

learn more about sulfuric acid here

https://brainly.com/question/10220770

#SPJ1

The most difficult of the pollutants to control is likely carbon dioxide because it is a greenhouse gas that is released from a variety of sources, including natural processes and human activities such as burning fossil fuels.

Unlike other pollutants, carbon dioxide cannot be easily removed from the atmosphere and its effects on climate change are long-lasting. While strategies can be implemented to reduce carbon dioxide emissions, such as transitioning to renewable energy sources, it is a complex and ongoing challenge. One of the main difficulties in controlling carbon dioxide emissions is that they are tied to many fundamental aspects of modern life, including energy production, transportation, and manufacturing. Therefore, finding effective ways to reduce carbon dioxide emissions while maintaining economic growth and meeting societal needs remains a major challenge for policymakers and society as a whole.

To know more about Carbon dioxide pollutant, please click on:

https://brainly.com/question/1428582

#SPJ11

The metal component that is protected from corrosion is called the option A: cathode.

Metal surfaces experience corrosion, an electrochemical process, when they come into contact with electrolytes. Corrosion is the process of converting a metal back to its original form as an ore; during this transformation, the metal disintegrates and loses structural integrity. Pipelines, structures, and ships all make use of these metal surfaces.

It is crucial to make sure that these metals endure as long as possible, which calls for cathode protection. Cathode is a metal rod placed in an electrolyte where oxidation takes place so that it loses electrons in the electrolyte and get oxidized. Zinc metal is generally used as a cathode electrode.

To know more about corrosion, refer:

https://brainly.com/question/29854677

#SPJ4

The correct answer is b. Conifer forests at high elevations are most affected by acid rain.

Acid rain is caused by emissions of sulfur dioxide and nitrogen oxide, which react with the atmosphere to form sulfuric and nitric acid. These acids can then fall to the ground as acid rain. Conifer forests at high elevations are particularly vulnerable to the effects of acid rain because the soil in these areas is often thin and lacks buffering capacity, making it more susceptible to acidification. Acidification of the soil can lead to nutrient imbalances and other negative impacts on plant health. Acid rain can damage the trees by leaching nutrients from the soil, reducing photosynthesis, and increasing the trees' susceptibility to insect and disease damage.

To learn more about acid rain click here https://brainly.com/question/26775834

#SPJ11

If 2.35 grams of magnesium oxide are formed, 1.42 grams of Mg reacted in the reaction.

Magnesium oxide is a chemical compound composed of magnesium and oxygen, with the chemical formula MgO.

2 Mg(s) + O₂(g) -> 2 MgO(s)

From the equation, we can see that 2 moles of magnesium react with 1 mole of oxygen to produce 2 moles of magnesium oxide. This means that the mole ratio of magnesium to magnesium oxide is 2:2, or simply 1:1.

2.35 g MgO x (1 mol MgO/40.31 g MgO) = 0.0583 mol MgO

Since the mole ratio of Mg to MgO is 1:1, we know that 0.0583 moles of Mg also reacted. Now we can use the molar mass of Mg to calculate the mass of Mg that reacted:

0.0583 mol Mg x 24.31 g/mol = 1.42 g Mg

Therefore, 1.42 grams of Mg reacted in the reaction.

To know more about magnesium oxide, refer

https://brainly.com/question/24605172

#SPJ1

Skin cancer is a condition where the cells in the skin's layers grow uncontrollably, often due to DNA damage from UV radiation or other factors. Malignant melanoma is a particularly aggressive and dangerous form of skin cancer that arises from the pigment-producing cells called melanocytes. Option (d) is the correct answer.

This type of cancer can spread quickly to other parts of the body if not detected and treated early, making it crucial to monitor any changes in moles or skin lesions.

Risk factors for malignant melanoma include excessive sun exposure, a history of sunburns, fair skin, a family history of the disease, and the presence of atypical moles. It is essential to practice sun safety by using sunscreen, wearing protective clothing, and seeking shade when necessary to minimize UV radiation exposure.

Early detection is key in the successful treatment of malignant melanoma. The ABCDE method can be helpful in identifying suspicious moles or skin lesions: Asymmetry, Border irregularity, Color variation, Diameter larger than 6mm, and Evolving appearance. If you notice any changes in your skin, consult a dermatologist immediately.

Treatment options for malignant melanoma depend on the stage of the cancer and may include surgery, radiation therapy, chemotherapy, immunotherapy, and targeted therapy. The prognosis varies, with early detection and intervention significantly increasing the chances of survival. It is essential to be proactive in preventing and detecting skin cancer to ensure the best possible outcomes.  Option (d) is the correct answer

to learn more about melanoma

https://brainly.com/question/30202788

#SPJ11

When maalox, an over-the-counter antacid, is taken, it helps to neutralize stomach acid, which can cause discomfort and pain.

The aluminum hydroxide, Al(OH)3, in maalox reacts with stomach acid, HCl, to form aluminum chloride, AlCl3, and water, H2O. This reaction can be written as follows:  Al(OH)3(s) + 3HCl(aq) → AlCl3(aq) + 3H2O(l)

In this reaction, the solid aluminum hydroxide reacts with the aqueous hydrochloric acid to form the aqueous aluminum chloride and liquid water. It is important to note that aluminum hydroxide acts as a base in this reaction and neutralizes the acid.

This reaction helps to reduce the acidity of the stomach, providing relief from heartburn and acid reflux symptoms. Overall, the use of aluminum hydroxide in antacids helps to reduce the amount of acid in the stomach and prevent further damage to the esophagus.

To know more about acid click here

brainly.com/question/30686324

#SPJ11

The correct answer is C.4. Steroids are composed of four fused rings, specifically three cyclohexane rings and one cyclopentane ring. This fused ring system is called the steroid nucleus.

Steroids are a class of organic molecules that have a common structure consisting of four fused rings of carbon atoms. The three rings are cyclohexane in structure, while the fourth is a cyclopentane ring. This arrangement of rings gives steroids their characteristic structure and properties.

Steroids are synthesized naturally in the body and play a variety of important roles, including serving as hormones, signaling molecules, and structural components of cell membranes. Some common examples of steroids include cholesterol, estrogen, testosterone, and cortisol.

Steroids are also widely used in medicine for their anti-inflammatory and immunosuppressive properties. However, steroids are also commonly abused as performance-enhancing drugs, particularly in sports. The use of these drugs can lead to a range of negative health effects, including liver damage, infertility, and increased risk of heart disease and stroke.

The study of steroids and their properties is an active area of research in fields such as biochemistry, pharmacology, and synthetic chemistry.

To know more about Steroids

brainly.com/question/13517647

#SPJ11

In order to determine which voltaic cell(s) have iron acting as the anode, we must first understand the basics of a voltaic cell.

A voltaic cell consists of two half-cells, each containing an electrode and a solution of an electrolyte. The half-cell with the higher reduction potential will act as the cathode, while the half-cell with the lower reduction potential will act as the anode.

In this scenario, we know that the half-cell with the Fe electrode contains a 1.0 M Fe(NO3)2(aq) solution. We also know the contents of the other half-cells: Cell 1 contains a 1.0 M CuCl2(aq) solution with a Cu electrode, Cell 2 contains a 1.0 M NiCl2(aq) solution with a Ni electrode, and Cell 3 contains a 1.0 M ZnCl2(aq) solution with a Zn electrode.

To determine which voltaic cell(s) have iron acting as the anode, we must compare the reduction potentials of each half-cell to that of the Fe half-cell. The standard reduction potential for the Fe2+/Fe half-cell is -0.44 V. The reduction potentials for the other half-cells are: Cu2+/Cu = +0.34 V, Ni2+/Ni = -0.23 V, and Zn2+/Zn = -0.76 V.

Based on these reduction potentials, we can determine that iron will act as the anode in Cells 2 and 3. In Cell 2, the Ni electrode has a more negative reduction potential than the Fe electrode, so Fe will be the anode. In Cell 3, the Zn electrode also has a more negative reduction potential than the Fe electrode, so Fe will again be the anode.

Overall, understanding the reduction potentials of each half-cell is crucial in determining which electrode will act as the anode in a voltaic cell.

To know more about cell click here

brainly.com/question/19138651

#SPJ11

In aromatic substitution reactions, substituent groups can either be ortho/para directing or meta directing. Ortho/para directing groups direct incoming groups to the ortho or para positions on the ring, while meta directing groups direct incoming groups to the meta position on the ring.

Some examples of ortho/para directing groups include -OH (hydroxyl), -NH2 (amino), -NHCOCH3 (acetamido), -OCH3 (methoxy), -CH3 (methyl), and -C6H5 (phenyl). These groups have lone pairs of electrons or partial charges that stabilize the intermediate and final products when added to the ortho or para positions.

Some examples of meta directing groups include -NO2 (nitro), -CN (cyano), -COOH (carboxylic acid), -SO3H (sulfonic acid), and -COR (acyl). These groups lack the electron density necessary to stabilize the intermediate and final products when added to the ortho or para positions, and thus direct incoming groups to the meta position.

It is important to remember that the directing effects of a substituent group can be influenced by the electron withdrawing or donating nature of neighboring groups on the ring.

To learn more about aromatic substitution reactions

https://brainly.com/question/14803468

#SPJ11

If hard water is softened by the ion exchange method, the level of sodium (d) will increase. This is because calcium and magnesium ions in the hard water are replaced with sodium ions during the ion exchange process.

The ion exchange method for softening hard water includes swapping out the calcium and magnesium ions for sodium ions, which raises the concentration of sodium in the water. This procedure has no impact on the levels of dissolved oxygen or iron.

The correct answer is d. sodium. Softening hard water through the ion exchange method involves replacing the calcium and magnesium ions with sodium ions, which results in an increase in the level of sodium in the water. Dissolved oxygen and iron levels are not affected by this process, and P1-1 is not a relevant term for this question.

To know more about ion exchange method click here:

https://brainly.com/question/14393904

#SPJ11

Answer: the only stress that would increase the yield of products (shift right) is decreasing the temperature (e) or increasing the volume (c).

Explanation:

Due to the endothermic nature of the given reaction in the forward direction, there will be a net absorption of heat from the system's surroundings during the course of the forward reaction progression. Reducing the temperature would facilitate the progress of the endothermic course and induce a rightward shift in the reaction.

Moreover, due to a reduction in the number of gaseous moles present on the product side, an amplification in volume would lead to a decline in the overall concentration of the produced species. Consequently, the reaction equilibrium would pivot towards the right-hand side.

Alternatively, raising the pressure would promote the progression of the reaction toward the side with a lower number of gaseous entities. Consequently, the reaction would experience a leftward shift, thereby opposing the intended direction.

Reciprocally, a reduction in the concentration of reactants would induce a shift of the reaction towards the left direction. This phenomenon arises from the decrease in the quantity of reactive particles available to yield collisions and reactions, therefore culminating in a diminished progress rate of the forward reaction.

The answer is a. Aluminum sulfate.

Aluminum sulfate, also known as alum, is a common coagulant used in water treatment. It is added to untreated water to cause impurities and particles to clump together and settle at the bottom of a tank or basin. This process is called coagulation and is an important step in the treatment of drinking water and wastewater.

The  coagulated particles can then be removed through sedimentation or filtration. Alum is preferred over other coagulants because it is effective in removing a wide range of impurities, including suspended solids, organic matter, and phosphates.

Visit to know more about Aluminium sulfate:-

brainly.com/question/28299913

#SPJ11

Unsaturated triglycerides undergo autooxidation at the double bond position of the fatty acid residue. Autooxidation is a chemical reaction that occurs when fatty acids are exposed to oxygen and results in the formation of free radicals, which can cause damage to cells and tissues.

The double bond in unsaturated fatty acids is particularly susceptible to oxidation due to its chemical structure, which makes it more reactive than saturated fatty acids. This can lead to the formation of harmful compounds such as lipid peroxides, which can contribute to various health problems.

1. Unsaturated triglycerides contain one or more double bonds in their fatty acid chains.
2. Autooxidation is a chemical reaction that occurs when the unsaturated fatty acids are exposed to oxygen.
3. The double bond position in the fatty acid residue is the most susceptible site for autooxidation.
4. As a result, the unsaturated triglycerides undergo autooxidation at the double bond position of the fatty acid residue.

To know more about health visit :-

https://brainly.com/question/5496881

#SPJ11

Therefore, the percent composition of FeSO4x7H2O is: 20.10% Fe, 11.53% S, 63.33% O, 5.03% H

The molar mass of FeSO4x7H2O can be calculated as follows:

[tex]FeSO4* 7H2O = (1 * 55.845 g/mol) + (1 * 32.06 g/mol) + (4 * 16.00 g/mol) + (7 * 18.02 g/mol)[/tex]

FeSO4x7H2O = 278.01 g/mol

Now, we can calculate the mass of each element:

Mass of Fe = 0.0603 g

Mass of S = 0.0346 g

Mass of O = 0.190 g

Mass of H = 0.0151 g

Total mass of compound = 0.300 g

Calculating the percent composition of FeSO4x7H2O as follows:

Fe = (Mass of Fe / Total mass of compound) x 100%

Fe = (0.0603 g / 0.300 g) x 100%

Fe = 20.10%

S = (0.0346 g / 0.300 g) x 100%

S = 11.53%

O = (0.190 g / 0.300 g) x 100%

O = 63.33%

H = (0.0151 g / 0.300 g) x 100%

H = 5.03%

To know more about percent composition, here

brainly.com/question/17505281

#SPJ4

If the concentration of H⁺ ions in a solution is 3.16 x 10⁻⁴mol/l. Then the concentration of OH⁻ ions is 3.16 × 10⁻¹¹ mol/l. This is using ionic product of water.

Pure water has low electrolyte strength. It produces protons and hydroxyl ions when it ionizes itself to a very little degree. Water that has self-ionized can be visualized as:

H₂O(l) (acid) + H₂O(l) (base) ↔ H₃O⁺(conjugate acid) + OH⁻(conjugate base)

It demonstrates that water is both a proton donor and an acceptor.

Only a small fraction of the millions of water molecules—which are only minimally ionized—are broken down into H⁺ and OH⁻ ions. Because 1 litre of water equals 1000cc = 1000g and the molar mass of H₂O equals 18gmol⁻¹, the concentration of unionized water molecules, or [H₂O], remains nearly constant (being equivalent to 1000/18=55.55 moles per litre), i.e., [H₂O]= constant.

Kw=[H₃O⁺][OH⁻]

Alternatively, Kw=[H⁺][OH⁻]

An ionic product of water (Kw) is the new constant, which is a result of the equilibrium constant and water concentration.

The concentration of OH⁻ ions can be calculated from the concentration of H⁺ ions using the expression for the ion product of water (Kw):

Kw = [H⁺][OH⁻] = 1 x 10⁻¹⁴ mol/L

Given the concentration of H⁺ ions and presuming that the solution is in equilibrium, we can solve for the concentration of OH⁻ ions:

[H⁺][OH⁻] = 3.16 x 10⁻⁴ mol/L × [OH⁻]

= (1 x 10⁻¹⁴mol/L)/ (3.16 x 10⁻⁴ mol/L)

[OH⁻] = 3.16 x 10⁻¹¹ mol/L

To know more about electrolyte, visit:

https://brainly.com/question/29771118

#SPJ1

.

The minimum chlorine residual at the extreme end of the main after standing for 24 hours when disinfecting a new or repaired main is c.) 25 mg/L.

When disinfecting a new or repaired main, the American Water Works Association (AWWA) recommends a minimum chlorine residual of 50 mg/L at the upstream end of the main and 25 mg/L at the downstream end after a contact time of 24 hours. This ensures that the disinfectant has sufficient time to reach and eliminate any bacteria or viruses that may be present in the water mains. The residual chlorine concentration is typically measured using a chlorine test kit or a chlorine analyzer.

To know more about Disinfection:

https://brainly.com/question/30545640

#SPJ11

The two major differences of terrestrial planets are:

A terrestrial planet, or telluric planet, or solid planet, or rocky planet, is  described as a planet that is composed primarily of silicate rocks or metals.

Terrestrial planets are covered with solid surfaces, while the Jovian planets usually  have gaseous surfaces.

Mercury, Venus, Earth, and Mars are examples of  the terrestrial planets, while the Jovian planets are Jupiter, Saturn, Uranus, and Neptune.

Learn more about Terrestrial planets at: https://brainly.com/question/17210115

#SPJ1

The mass of the solution is the sum of the mass of the solute (18.9 grams) and the mass of the solvent (39.5 grams), which is 58.4 grams.

Charge separation might be considered to be polarity. As a result, polar solvents are those that can solvate, or dissolve, ions, and also have the ability to separate charges.

Because of its structure, a polar solvent molecule possesses a very tiny electrical charge. Water, which contains two hydrogen atoms and an oxygen atom, is the most normal and frequent example. The two hydrogen atoms and the lone oxygen atom are at an angle. The traditional polar solvent is water. The oxygen atom has a propensity to concentrate electron density around it.

To find the mass percent of the solution, we need to divide the mass of the solute by the mass of the solution and multiply by 100.
Mass percent = (mass of solute ÷ mass of solution) x 100
Mass percent = (18.9 ÷ 58.4) x 100
Mass percent = 32.4%
Therefore, the mass percent of the solution prepared by dissolving 18.9 grams of solid into 39.5 grams of water is 32.4%.

Learn more about solvent  here

https://brainly.com/question/15212814

#SPJ11

The distance between the static water level and the pumping water level is termed the "drawdown". To explain, when a well is pumped, water is drawn from the surrounding aquifer causing the water level around the well to drop. The distance between the original static water level and the new water level is the drawdown. This term is important in determining the well's yield and how much water can be pumped from the well without causing significant harm to the aquifer.

The substance that Channel X transmits would be the smallest substance dissolved in the extracellular fluid, which is likely to be potassium ions .

Channel X only transmits the smallest substances dissolved in the extracellular fluid through the axon membrane. . It would not be proteins as they are generally too large to be dissolved in the extracellular fluid, and sodium ions are not necessarily the smallest substance dissolved in the extracellular fluid. These channels are found in the axon membrane of neurons, and act as a gate that can open and close to allow the passage of potassium ions through the membrane. This allows the neuron to regulate the electrical potential across the membrane, and thus control the flow of electrical signals.

learn more about potassium ions Refer: https://brainly.com/question/29704319

#SPJ11

Aryl and vinyl halides are not good substrates for [tex]SN_{2}[/tex] reactions due to the following reasons:

Steric hindrance: In the [tex]SN_{2}[/tex] reaction, the nucleophile attacks the electrophilic carbon from the backside, which requires a clear path of attack. In the case of aryl and vinyl halides, the bulky aromatic or double bond group attached to the electrophilic carbon creates a lot of steric hindrance, making it difficult for the nucleophile to approach the carbon from the required angle.

Partial double bond character: In the case of vinyl halides, the double bond character of the carbon-carbon bond in the vinyl group reduces the availability of the electrophilic carbon for nucleophilic attack, making it less susceptible to [tex]SN_{2}[/tex] reaction.

Resonance stabilization: In aryl halides, the aromatic ring structure provides resonance stabilization to the electrophilic carbon, which makes it less electrophilic and less susceptible to nucleophilic attack.

Overall, these factors make aryl and vinyl halides poor substrates for [tex]SN_{2}[/tex] reactions.

To know more about nucleophile

brainly.com/question/30713995

#SPJ11

To calculate the final partial pressures of the gaseous components when 0.5 atm of carbon dioxide is placed in a flask at 1000K, we need to know the composition of the gas mixture.

We can use the ideal gas law and the mole fraction of each component to calculate the partial pressure of each component.

To calculate the final partial pressures of the gaseous components when 0.5 atm of carbon dioxide is placed in a flask at 1000K, we need to know the composition of the gas mixture.

Assuming we have a mixture of carbon dioxide and other gases, we can use the ideal gas law to determine the partial pressures of each component. The ideal gas law is expressed as PV = nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in Kelvin.

We can rearrange this equation to solve for the partial pressure of each component:

P = nRT/V

Assuming the volume of the flask is constant, we can simplify this equation to:

P = (n/V)RT

The number of moles of each component can be calculated using the mole fraction: n_i = x_i * n_total where n_i is the number of moles of component i, x_i is the mole fraction of component i, and n_total is the total number of moles in the mixture.

Assuming that carbon dioxide is the only component in the mixture, the partial pressure of carbon dioxide would be 0.5 atm. However, if there are other gases present in the mixture, we would need to know their mole fractions in order to calculate their partial pressures.

To know more about pressures Visit:

https://brainly.com/question/19952765

#SPJ11

The Na+/K+ pump transports three sodium ions out of the cell for every two potassium ions moved into the cell. This is an example of an antiport pump.

Antiport pumps are a type of active transport mechanism that simultaneously move two or more substances in opposite directions across a membrane.

In this case, the Na+/K+ pump helps to maintain the electrochemical gradient and resting membrane potential in cells by exchanging sodium and potassium ions against their concentration gradients, using energy derived from ATP hydrolysis. This process is crucial for various cellular functions, including nerve impulse transmission and muscle contraction.

In contrast, symport pumps transport substances in the same direction, and uniport pumps transport only one substance at a time. Facilitated diffusion, on the other hand, is a passive transport mechanism that uses protein carriers to move substances across a membrane without the expenditure of energy.

For more such questions on Na+/K+ pump, click on:

https://brainly.com/question/28521004

#SPJ11

In a bonding molecular orbital, the electron density is located between the nuclei, which pulls the nuclei closer together and stabilizes the bond.

In a bonding molecular orbital, the electron density is located between the nuclei which pulls the nuclei towards each other. This is because the electrons are shared by the two atoms, creating a bond that allows them to be attracted to each other. The more electron density there is between the nuclei, the stronger the bond will be. This is why atoms with similar electronegativities tend to form stronger bonds, as they share electrons more equally and have more balanced electron density between them.

To learn more about atoms click here

brainly.com/question/13973654

#SPJ11

At pH 7, groups with pKa values above 7 will be deprotonated, those with pKa values below 7 will remain protonated, and those around 7 will be partially ionize.

This is due to the side chain of histidine having a pKa value of 6.0. The two acidic amino acids are aspartate and glutamate, and at a physiological pH of 7, they both contain a complete negative charge on their side chains.

Tyrosine and serine are two more amino acids that can be deprotonated at high pH levels, although they mostly reside in their protonated, neutrally charged states at physiological pH levels. Ionizable functional groups can be found in amino acids.

To know more about ionize visit:-

https://brainly.com/question/15182996

#SPJ1

If ΔH < 0 and ΔS > 0, then ΔG is always negative (i.e., ΔG < 0). This indicates that the reaction is spontaneous and will proceed in the forward direction without the addition of external energy.

If ΔH > 0 and ΔS < 0, then ΔG is always positive (i.e., ΔG > 0). This indicates that the reaction is non-spontaneous in the forward direction and will only occur if energy is added to the system.

If ΔH < 0 and ΔS < 0, then ΔG is negative at lower temperatures. This indicates that the reaction is spontaneous in the forward direction at lower temperatures but may not be spontaneous at higher temperatures. This is because the negative ΔS term dominates at lower temperatures, but at higher temperatures, the positive ΔH term dominates, and the reaction becomes non-spontaneous.

The signs of ΔH and ΔS determine the spontaneity of a reaction, while the magnitude of ΔG determines the extent to which the reaction will proceed. A negative ΔG indicates that the reaction is spontaneous and will proceed to completion, while a positive ΔG indicates that the reaction is non-spontaneous and will not occur without the addition of external energy.

Learn more about energy here:

https://brainly.com/question/1932868

#SPJ11

The addition of sodium bicarbonate )will raise the pH of the solution.

Sodium bicarbonate is a basic compound that can act as a buffer and neutralize acids. When it dissolves in water, it releases bicarbonate ions and sodium ions ,which can react with acidic compounds and release hydroxide ions to increase the pH.

Therefore, the correct answer is (c) Raise the pH.

Sodium bicarbonate, also known as baking soda, is a white crystalline powder with the chemical formula. It is a common household chemical that is used for a variety of purposes, including baking, cleaning, and as an antacid to treat heartburn or indigestion.

Sodium bicarbonate is a weak base that reacts with acids to produce carbon dioxide gas, which makes it useful in baking to help dough rise. It is also effective at neutralizing acidic spills or odors, and can be used as a cleaning agent for surfaces or fabrics.

learn more about sodium bicarbonate  here

https://brainly.com/question/20670487

#SPJ4