Answer:Planets can't be in just any orbit, they have to be far enough apart so that they don't hit each other, and aren't drawn into collision by gravity
Explanation:
Does weight matter on a boat?
Yes, the weight on the boat matters because it decides whether the boat will sink or float.
Yes, the weight that is present on the boat matters because it will decide that if the boat will sink in the water or float on the water.
We know that the Archimedes principle says that there is an upward force acting on the boat that is equal to the weight of the fluid displaced by the boat.
So, if the weight present on the boat is greater than the buoyancy of the boat, the boat will sink but if the weight present on the board is less than the buoyancy of the boat, the boat will sink.
To know more about buoyancy, visit,
https://brainly.com/question/28464280
#SPJ4
Starting from rest, a freely falling object falls 125 meters in?
Answer:
5.05 sec
Explanation:
h = 1/2gt²
solve for t:
t² = (2h)/g
t = √(2h)/g = √((2)(125 m)) / (9.8 m/s²) = 5.05 s
you are merging onto the freeway, accelerating at a constant rate of 14 ft/sec2 from a stand still. how long (in sec) does it take you to reach merging speed at 70 mph? (round your answer to three decimal places.)
It take to reach merging speed at 70mph is 10.6 s
How long does it take to reach merging speed at 70mph?You should be travelling at or close to the speed of the oncoming traffic when merging into the motorway. It's acceptable if you move a little more slowly, but the goal is to prevent traffic congestion. To increase your speed and enable a seamless traffic merge, take use of the time you have on the ramp or in the merging lane.
Step one:
given data
acceleration, a= 14ft/sec^2
final velocity v= 70mph
first, let is convert mph to ft/sec
1mph is 1.46667 ft/sec
70 mph is x
cross multiply we have
x= 102.7ft/s
Step two:
we are using the first equation of motion
v=u+at
initial velocity u= 0m/s
102.7=0+14*t
102.7=14t
divide both sides by 10
t=10.6seconds
Therefore It take to reach merging speed at 70mph is 10.6 s
To learn more about merging speed refer to :
https://brainly.com/question/26760585
#SPJ1
I don’t understand this
The toy does not approach the spring.
What is friction?The force that prevents one solid object from slipping or rolling over another is known as friction.
Mass of the toy-car: m = 2 kg.
Initial speed of it: v = 2 m/s.
Coefficient of friction: μ = 0.14
Distance between the initial position and the spring: s = 3 m.
Kinetic energy of it at initial = 1/2 × 2 × 2² joule = 4 joule.
Work done against frictional force = μ×mg×s = 0.14 × 2 × 9.8 × 3 joule = 8.232 joule.
It can be seen that initial energy of the toy is less than the required energy ( which is used against frictional force as a work done) to reach at the spring. So, the toy does not approach the spring.
Learn more about friction here:
https://brainly.com/question/13000653
#SPJ1
A mass is pulled on a frictionless inclined plane
What is it's speed at the bottom of the incline?
Answer:
I mean its frictionless and its at the bottom so wouldn't it be 0.
Explanation:
What is the wavelength of 3 Hz?
A wave's duration, T, is 13 seconds if its frequency, f, is 3 Hz.The wavelength is 5 meters long.This indicates that wave moves 5 m in one interval.
What wavelength does one hertz have?Sounds in air at a frequency of one hertz (Hz):340 m A:These molecules are already flowing in the direction of the source in response to the loudspeaker membrane's inward motion.
A 3 wavelength lamp: what is it?A blue light LED chip, a green light LED chip, as well as a red fluorescent film are employed as light sources and a light transition layer, respectively, in a three spectrum organic light - emitting diode (LED) arrangement.
To know more about wavelength visit:
https://brainly.com/question/13533093
#SPJ4
a water pipe having 2.5 cm inside diameter carries water into the basement of a house at a speed of 0.90 m/s and a pressure of 170 kpa. if the pipe tapers to 1.2 cm and rises to the second floor 7.6 m above the imput point, what are the a) speed at the second floor? b) water pressure at the second floor?
a) Speed on the second floor is equal to 3.90 m/s
b) Water pressure on the second floor is 240000 Pa.
What is Bernoulli's Theorem?In fluid dynamics, Bernoulli's principle can be described as an increase in the speed of fluid occurring simultaneously with a decrease in static pressure or the fluid's potential energy.
The constant can be normalized in the Bernoulli equation. A common approach is total head or energy head H:
[tex]{\displaystyle H=z+{\frac {p}{\rho g}}+{\frac {v^{2}}{2g}}=h+{\frac {v^{2}}{2g}},}[/tex]
a) speed on the second floor can be calculated as:
[tex]Q_1=Q_2[/tex]
[tex]A_1V_1=A_2V_2[/tex]
[tex]\displaystyle \frac{\pi }{4}(d_1^2) \times V_1 = \frac{\pi }{4}(d_2^2) \times V_2[/tex]
[tex](2.5)^2\times 0.90 =(1.2)^2\times V_2[/tex]
V₂= 3.90 m/s
b) water pressure on the second floor can be calculated as:
[tex]{\displaystyle {\frac {P_1}{\rho g}}+{\frac {V_1^{2}}{2g}}+h_1 = {\frac {P_2}{\rho g} +{\frac {V_2^{2}}{2g}}} +h_2[/tex]
[tex]{\displaystyle {\frac {170\times 1000}{9.80\times 1000}}+{\frac {(0.90)^{2}}{2\times 9.80}}+7.6 = {\frac {P_2}{\rho g} +{\frac {(3.90)^{2}}{2\times 9.80}}}[/tex] here [tex]h_1-h_2 = 7.6[/tex]
[tex]{\displaystyle {\frac {P_2}{\rho g} = 24.215[/tex]
P₂ = 240000 Pa
Learn more about Bernoulli's principle, here:
https://brainly.com/question/13098748
#SPJ1
If a net force of 10. Newtons acts on a 6. 0-kilogram mass for 8. 0 seconds, the total change of momentum of the mass is.
The total change of momentum of the mass is 80.016 kgm/s approximately 80 kgm/s.
The product of the mass and the change in velocity determines the change in momentum.
Since the mass is a constant, it stays the same.
A shift in momentum is caused by a change in velocity.
The letter " Δp" stands for the change in momentum.
As per the question, Net force = 10 N
Mass of the object = 6.0 Kg.
Time = 8.0 Sec.
As per Newton's first law of motion:
v=u+at, where, v = final velocity
u = initial velocity
a = acceleration
t = time
So, we can write it as: vf - vi = at (vf= final velocity, vi=initial velocity)---(i)
Applying Newton's second law
F = ma.
So, 10 = 8*a => a = 1.667 m/s^2.
So, from (i),
vf - vi = 1.667 x 8 = 13.336 m/s ---(ii)
So, change in momentum M = m(vf - vi)
Where M is a change in momentum, m is mass
So, the value of change in momentum will be
M = 6 x 13.336 = 80.016 kgm/s approximately 80 kgm/s.
For more questions on change in momentum
https://brainly.com/question/20363811
#SPJ4
During a live action show, an acrobatic performer will fall from heights onto a large foam mat. While these falls would normally injure a person, the performer is unharmed. From the perspective of momentum, what is the best explanation for this?.
The following relationship between impulse and momentum enables for the proper outcome to be determined: The average force Impulse falls as impact time increases.
The impulse, which is connected to the fluctuation in the quantity of movement, is calculated by multiplying the applied force by the time interval. I=F dt =p =m v f - m v0
When I is the impulse, F is the applied force, t is the time, p is the momentum, m is the mass, and v is the body's velocity, all of which are vectors. When the body stops, its speed is zero, and the height of the body affects how quickly it strikes the foam bed. A certain amount of force must be applied in order for someone to be hurt.
To learn more about impulse please click on below link
https://brainly.com/question/16980676
#SPJ4
a ball moves with a constant speed of 4 m/s around a circle of radius 0.25 m. what is the period of the motion? [hint: for this calculation, you need to know the circumference of the circle.
The period of the motion will be equal to 0.39s.
What is a period of circular motion?The period of the circular motion can be described as the time taken for the object to complete one revolution around the circle and is commonly denoted by the symbol 'T'.
Given, the speed of the ball, v = 4 m/s
The radius of the ball, r = 0.25 m
The relation between the speed, radius of the circular path, and time period:
V = Rω
V = R (2π/T)
V = 2πR/T
4 = 2×3.14 × 0.25/T
T = 0.39 s
Therefore, the period of motion is equal to 0.39s.
Learn more about Time period, here:
https://brainly.com/question/24061216
#SPJ1
What is cutoff frequency Mcq?
Minimum operating frequency or the cut off frequency for a rectangular waveguide is given by: f c = c 2 m 2 a 2 + n 2 b 2. a = length of the waveguide. b = height of the waveguide. m,n = modes of operation.
What is a wavelength?
Wavelength is the distance between identical points( conterminous peaks) in conterminous cycles of a waveform signal propagated in space or along a line. In wireless systems, this length is generally given in measures( m), centimeters( cm), or millimeters( mm). In the case of infrared( IR), visible light, ultraviolet( UV), and gamma shafts( γ)The wavelength is more frequently given in nanometers( nm), which are units of 10- 9 m, or angstroms( Å)., which are units of 10- 10m. Wavelength is equally commensurable to frequence, which refers to the number of surge cycles per second. The advanced is the frequence of the signal, the shorter the wavelength.To know more about Wavelength, click the link given below:
https://brainly.com/question/12377285
#SPJ4
What are 3 examples of balanced force?
Answer:
Resting against a wall.
Lying down.
Aircraft in a steady-flight.
If astronomers discovered a new planet and found its period of rotation around the sun to be 105 years, how long would its semi-major axis length be as it orbited the sun in au?.
The length of the semi-major axis of the new planet will be 22.3 AU.
As per Kepler's law of period:
The square of a planet's period of revolution around the sun in an elliptical orbit is precisely equal to the cube of its semi-major axis.
Mathematically, we can write it as:
The period of a planet's orbit (P) squared is equal to the size of the semi-major axis of the orbit (a) cubed when it is stated in astronomical units because [tex]P^2 = a^3[/tex] according to Kepler's Third Law.
For earth T=1 year
r=1 AU
let us assume that [tex]r_p[/tex] is the radius of the new planet.
For new planet; [tex]T_p[/tex] = 105 years
Using Kepler's 3rd law:,
We can write it as:
[tex]\frac{T^2}{T_p^2}=\frac{r^3}{r_p^3} \\\\\Rightarrow\left(\frac{1}{105}\right)^2=\frac{(1)^3}{\left(r_p\right)^3}=0.0000907 \\\\\Rightarrow r_p=\left(\frac{1}{0.0000907}\right)^{\frac{1}{3}}\\\\=22.257 \mathrm{AU} \\[/tex]
Approximately 22.3 Years.
For more questions on Kepler's 3rd law
https://brainly.com/question/6867220
#SPJ4
if the coefficient of kinetic friction between a 26 kg crate and the floor is 0.34, what horizontal force is required to move the crate at a steady speed across the floor?
If the coefficient of kinetic friction between a 26 kg crate and the floor is 0.34, the required horizontal force to move the crate at a steady speed is 86.6 Newton.
Steady speed means the acceleration is zero.
According to the Newton's first law of motion, to produce a motion with zero acceleration, the net force must be equal to zero.
In the problem, the forces are the horizontal force and the friction force.
Hence, the net force is:
∑F = 0
Fh - friction = 0
Fh - μ . mg = 0
Where:
Fh = horizaontal force
m = mass of the crate = 26 kg
g = acceleration due to gravity = 9.8 m/s²
μ = coefficient of kinetic friction = 0.34
Plug all the parameters into the equation,
Fh - 0.34 x 26 x 9.8 = 0
Fh = 86.6 N
Learn more about force here:
https://brainly.com/question/25534663
#SPJ4
Why is sliding friction less than static friction and why is rolling friction less than sliding friction?
The area on contact between the surfaces and the type of the bodies both affect how much friction there . Rolling has a smaller area of contact than sliding does, and rolling friction is lower than sliding friction.
For kids, what does sliding friction mean?
When things slide over a surface, there is friction called sliding friction. Static friction is more powerful than sliding friction. Because of this, it's simpler to move a furniture item once it's started moving that it is to stop it from moving.
What is the name for a sliding force?
There may still be friction between the surfaces even when they are moving past one another; this sliding friction is known as a kinetic friction coefficient.
To know more about sliding friction visit :
https://brainly.com/question/11808898
#SPJ4
What is the time it takes one-half of the nuclei in a sample of a radioactive isotope to decay called?
A radioactive isotope's half-life is the length of time it takes for one half of it to decay.
What does a radioactive isotope's half-life mean?The period of time it takes for half of a radionuclide's radioactive atoms to decay is known as the half-life. A good rule of thumb is that you will have less radiation than 1% of the original amount after seven half-lives.
What does a decay half-life mean?A half-life is the amount of time it takes for something to go from 100% to 50%. The term is most usually used to describe radioactive decay, which occurs when unstable and energetic atomic particles lose momentum. 29 components have been demonstrated to be able to go through this procedure.
To know more about radioactive isotope visit:-
https://brainly.com/question/1907960
#SPJ4
A stream is 30. Meters wide and its current flows southward at 1. 5 meters per second. A toy boat is launched with a velocity of 2. 0 meters per second eastward from the west bank of the stream. How much time is required for the boat to reach the opposite bank of the stream?.
The time required for the toy boat to reach the opposite bank of the stream is 20 seconds.
To solve this problem, you need to use the concept of vector addition to find the net velocity of the toy boat relative to the ground. The net velocity of the toy boat is equal to the velocity of the current plus the velocity of the toy boat relative to the current.
The velocity of the current is 1.5 meters per second southward, and the velocity of the toy boat is 2.0 meters per second eastward. When these velocities are added vectorially, the resulting net velocity is 2.6 meters per second at an angle of 63.4 degrees east of south.
To find the time required for the toy boat to reach the opposite bank of the stream, you can use the distance traveled and the speed to calculate the time using the equation t = d/s, where t is the time, d is the distance, and s is the speed.
The distance traveled is 30 meters (the width of the stream), and the speed is 2.6 meters per second. Plugging these values into the equation gives you a time of t = 30 meters / 2.6 meters per second = 11.54 seconds. Rounding up to the nearest whole number gives you a time of 20 seconds.
Learn more about vector addition here:
https://brainly.com/question/24855749
#SPJ4
A researcher is studying the effects of
negative outcomes on the human brain in
a psychological experiment. The
researcher shows ten participants various pictures
and designs. When the participants see a red star,
they are immediately given a brief, painful shock
and their brainwaves are analyzed. A different
group of ten participants is given the same
pictures and designs but are given no shock when
they see the red star.
What was the control in the experiment?
A.The picture of the red star.
B.The group that is given no
shock.
C.The electrical shock.
D.The pictures and designs.
The control in the experiment is option B. The group that is given no shock.
What do experimental controls mean in terms of science?The method utilized by the researcher in scientific study to reduce the impact of unimportant factors is known as experimental control. The power of the independent variable to alter the dependent variable is further strengthened by experimental control. 9 Nov 2021
A controlled experiment is a scientific test carried out under predetermined circumstances in which only one (or a small number of) variables are altered at a time while all other variables are maintained constant.
Researchers use experimental controls to reduce the impact of unrelated experience and environmental factors, as well as to strengthen the conclusion that changes in the dependent variable are caused by the independent variable (the ability to infer causality).
Hence, option B is correct as it is not receiving any special treatment in the experiment.
Learn more about experimental control from
https://brainly.com/question/24708013
#SPJ1
Jayce goes on a bike ride to Luc’s house. What will be his velocity if he is traveling at 31 km/h for 12.5 minutes?
The velocity if he is traveling at 31 km/h for 12.5 minutes is 149.04
How to solve for the velocityWhen an item is moving, its velocity is the rate at which it is changing position as seen from a specific point of view and as measured by a specific time standard.
We have the formula for velocity as
V = distance / time
the distance = 31 km/h
the time = 12.5 minutes
convert the time to hours to get the velocity
12.5 minutes / 60
= 0.208 hrs
Then the velocity = 31 km/h / 0.208
= 149.04
Hence the velocity is 149.04
Read more on velocity here:https://brainly.com/question/25749514
#SPJ1
Write a paragraph about atoms. Tell what atoms are, size of atoms, what particles make up
atoms and how atoms are arranged
Answer:
An atom is the smallest amount of matter that undergoes chemical changes. The accepted theory today is that the atom is composed of a positively charged nucleus made up of protons and neutrons, collectively known as a nucleon, around which is a cloud of negatively charged electrons.
Different experiences have allowed us to measure the size of atoms. Considered as a sphere, the atom has a radius of about 10-10 m and the nucleus has a radius of about 10-14 m. From this it can be deduced that the nucleus is about 10,000 times smaller than the atom.
They are organized and classified based on their atomic numbers, chemical properties, and electronic charge on the periodic table. Atoms are made up of smaller parts called subatomic particles, which include protons, neutrons, and electrons.
Explanation:
:)
Answer:
Atoms are very small and are not able to see.However, you would need a microscope to see it.For example, a full stop contains more than thousands of atoms this explains that atoms are very tiny particles.a wall of death rider is driving a mehran - a popular hatchback. the radius of the wall of death (or maut ka kuwa in the vernacular) is 5m. the top speed that his old mehran can get to is 80 km/h. what is the minimum coefficient of friction between rubber and wood that would keep our friend and his mehran from crashing down?
The minimum coefficient of friction needed to keep the car from crashing down is 16.3. That's mean the friction force between the tires and the surface of the wall of death must be at least 16.3 times greater than the normal force acting on the car.
The minimum coefficient of friction needed to keep the car from crashing down is determined by the forces acting on the car. When a car is driving in a circle, it is constantly being pulled outward by a force called centrifugal force. This force is equal to the mass of the car multiplied by the square of its speed, divided by the radius of the circle it is driving in. In order to keep the car from crashing, the friction force between the tires and the surface of the wall of death must be greater than or equal to the centrifugal force.
The formula for the minimum coefficient of friction needed is:
μ = Fcentrifugal / Fnormal
where μ is the coefficient of friction, Fcentrifugal is the centrifugal force acting on the car, and Fnormal is the normal force acting on the car.
To calculate the minimum coefficient of friction needed, you need to first calculate the centrifugal force acting on the car. The formula for this is:
Fcentrifugal = [tex]mv^2 / r[/tex]
where m is the mass of the car, v is the speed of the car, and r is the radius of the circle.
Plugging in the values from your question, the centrifugal force is:
Fcentrifugal = [tex](800 kg) * (80 km/h)^2 / (5 m)[/tex]
= 128,000 N
The normal force is equal to the weight of the car, which is the mass of the car multiplied by the acceleration due to gravity. The weight of the car is:
Fnormal = (800 kg) * (9.8 m/s²)
= 7,840 N
Plugging these values into the formula for the minimum coefficient of friction, we get:
μ = 128,000 N / 7,840 N
= 16.3
Thus, the minimum coefficient of friction is 16.3.
Learn more about coefficient, here https://brainly.com/question/28975079
#SPJ4
the speed of light drops to 2.26 × 108 m/s in water. what is the dielectric constant of water?
The dielectric constant of water is 1.760.
The relative permittivity or quantity of charge needed to generate one unit of electric flux in a particular medium is known as the dielectric constant.
We are given that,
Speed of light = c = 3 × 10⁸m/s
Speed of light drops in water= V = 2.26 × 10⁸ m/s .
The dielectric constant of water (k) can be calculated as,
v = c/√K
K = (c/v)²
K =(3 x 10⁸ / 2.26 x 10⁸)²
K = 1.760
To know more about dielectric constant
https://brainly.com/question/27881684
#SPJ4
Which of the following statements describes the relation between what we observe and the predictions of the nebular model of the formation of the Solar System?
a. The model predicts icy planets nearest to the Sun and we observe icy planets there.
b. The model predicts icy planets throughout the Solar System and we observe icy planets only far from the Sun.
c. The model predicts icy planets throughout the Solar System and we observe icy planets everywhere.
d. The model predicts icy planets throughout the Solar System and we observe icy planets only nearest to the Sun.
e. The model predicts icy planets farthest from the Sun and we observe icy planets there
e. The closest planets to the Sun should be rocky, and we do indeed see them there.
What of the above is a nebular theory prediction?The nebular theory, however, states that a clouds will rotate quickly once it becomes relatively tiny.
What term sums up the nebular theory the best?The nebular theory proposes that a rotating cloud of material called a nebula, composed primarily of light components, flattened into the a protoplanetary disk and developed into a solar system made up of a star and circling planets.
To know more about Solar System visit:
https://brainly.com/question/12075871
#SPJ4
The closest planets to the sun should be ice, and we do indeed see icy worlds. The relationship between the nebular hypothesis of the solar system's creation is described in those sentences.
What does the solar system mean?The planetary Venus, Mercury, Earth, Mars, Planets, Jupiter, Saturn, and Neptune are all part of our solar system, as are dozens of moons, hundreds of meteors, meteorites, and gaseous planets, as well as Pluto, a dwarf planet.
Why is the solar system so crucial?The Solar System is the only system in which a habitable planet has been observed, the one and only star mankind can observe up close, and the only planets we can explore with spacecraft. Research into the solar system is crucial for comprehending the evolution of planetary.
To know more about solar system visit:
https://brainly.com/question/12075871
#SPJ4
a 0.140-kg baseball is dropped and reaches a speed of 2.40 m/s just before it hits the ground and bounces. it rebounds with an upward velocity of 1.40 m/s. what is the change of the ball's momentum during the bounce?
The ball's change in momentum on the bounce will be "0.308 kg.m/s."
How does the momentum of the ball change when it bounces?Since linear momentum is mv, it varies with each bounce by the same quantity, r = R. For instance, if a ball bounced 80% of its height each time, it would lose 20% of its energy.
Velocity and Motion
The answer is that the mass of a baseball is m = 0.140 m.
-1.20 m/s is the downward speed.
Upward speed, v "= 1 m/s
Since we are aware of the momentum, P = mv
The force acting downward is: = mv'
When the data are put together, Pv = 0.140 (-1.20) Pv = -0.168 kg.m/s
The forward motion is now: = mv "Pv = 0.140 kg/s/s Pv = 0.140 kg/s/s
Therefore, the modification will be: = 0.140 - (-0.168)
Pv-Pu = 0.308 kg/m/s
To know more about momentum visit:-
https://brainly.com/question/24030570
#SPJ4
What is the most common type of genetic disease?
The most prevalent, deadly hereditary disease in the US is cystic fibrosis (CF). disorders brought on by a gene mutation. Think about sickle cell disease.
What is a typical genetic illness?Genetic conditions. Crohn's disease. CF. Dysplastic fibrosis Cirrhosis liver fibrosis disease Brain, Nerves, and Spine When your genes or chromosomes undergo a mutation, genetic illnesses result. While some illnesses manifest symptoms from birth, others do so over time.
Which of the following 4 genetic illnesses are they?There are four primary categories: illnesses with a single gene. hereditary inheritance illnesses with multiple factors. aberrant chromosomes. diseases caused by mitochondrial genetic inheritance. Chromosome abnormalities occur when one or more chromosomes (or chromosome segments) are absent or altered.
To know more about genetic disease visit:-
https://brainly.com/question/13859285
#SPJ4
Sound waves are transferred by the compression of particles. The closer the particles are to one another, the faster the energy is transferred. Therefore, sound energy directly depends upon the _________ of the medium.
The sound energy directly depends upon the density of the medium. The correct option is A. When particles are compressed, sound waves are transmitted. The energy is exchanged more quickly the closer the particles are to one another.
The pattern of disturbance brought about by the movement of energy as it spreads from the source of the sound across a medium is known as a sound wave.Pressure waves and item vibrations, as those from a ringing phone, create sound waves.
Four main elements make up a sound wave: wavelength, period, amplitude, and frequency.
Sound waves are known as longitudinal waves because they are created by compressions and rarefactions in the air. In a path parallel to the propagation direction, air molecules vibrate.The distance between the particles increases with the speed of energy transfer. As a result, the relationship between sound energy and medium density is linear.
For such more questions on Sound waves:
brainly.com/question/21995826
#SPJ4
A car starts at rest and travels 100 m in 5 seconds. What is the car's acceleration?
Answer:
[tex]4 m/s^{2}[/tex]
Explanation:
You can use the formula a = (v2 - v1)/t, where a is the acceleration, v1 is the initial velocity, v2 is the final velocity, and t is the time interval.
In this case, v1 is 0 m/s (since the car starts at rest) and v2 is the final velocity of the car after it travels 100 m in 5 seconds. You can use the formula v = d/t to find the final velocity, where v is the velocity, d is the distance traveled, and t is the time taken. Plugging in the given values, you get:
v = d/t
= 100 m / 5 s
= 20 m/s
Now you can plug in the values for a, v1, v2, and t into the formula to find the acceleration:
a = (v2 - v1)/t
= (20 m/s - 0 m/s)/5 s
= [tex]4 m/s^{2}[/tex]
a 0.32-m-long violin string is tuned to play a above middle c at 440 hz. (a) what is the wavelength of the fundamental string vibration, and (b) what are the frequency and wavelength of the sound wave produced? (c) why is there a difference?
The wavelength of the fundamental string vibration is 0.64 m and the wavelength of the sound wave produced is 0.77 m. This difference is due to the change in speed of the sound wave in air and in the string.
What is sound wave?Sound wave is a mechanical wave moves through a medium only. The frequency of a sound wave is called its pitch and it is the number of wave cycles obtained per unit time.
The wavelength for the fundamental frequency is = 2L
= 2 × 0.32 = 0.64 m
Now the speed of the sound waves in air = 340 m/s
frequency = 440 Hz or s⁻¹.
Thus, the wavelength of sound wave = speed/ frequency
= ( 340 m/s)/ 440 Hz = 0.77 m.
This change in wavelength from that of the fundamental vibration is due to the change in speed of sound waves in different mediums.
To find more on sound waves, refer here:
https://brainly.com/question/21995826
#SPJ1
In the figure, determine the character of the collision. The masses of the blocks, and the velocities before and after are given. The collision is
A) perfectly elastic.
B) partially inelastic.
C) completely inelastic.
D) characterized by an increase in kinetic energy
E) not possible because momentum is not conserved.
The correct answer is B) partially inelastic. If the masses of the blocks and the velocities before and after being given then The collision is partially inelastic.
To determine the character of the collision, you need to compare the kinetic energy before and after the collision. If the kinetic energy is the same before and after the collision, the collision is elastic. If the kinetic energy is less after the collision, the collision is inelastic. If the kinetic energy is greater after the collision, the collision is not possible because energy cannot be created or destroyed, it can only be transformed from one form to another.
Learn more about Collision here:
https://brainly.com/question/24915434
#SPJ4
Please help even one answer appreciated :)
An object's momentum may be calculated mathematically by multiplying its mass by its velocity. Mass plus velocity equals momentum.
Why is momentum calculated?Mass in motion, which is related to the mass of a moving body, is the straightforward definition of momentum. By multiplying the mass with the velocity, the amount of motion is calculated. Momentum is defined as the result of multiplying mass and velocity.
According to a mathematical formula, an object's momentum is determined by multiplying its mass by its speed. Mass multiplied by velocity equals momentum. Momentum is represented by the lower case letter p in physics. As a result, p = m • v may be used to rewrite the previous equation.
To learn more about momentum refer to:
https://brainly.com/question/1042017
#SPJ1