The position of an object is where it sits on the number line. When the object moves to another position, its displacement is the second position minus the first position.
Δ x = x2 − x1
The word displacement implies we keep track of which way the movement occurs. In one dimension the direction is indicated by the sign: negative if to the left and positive if to the right. The word distance means how far the object moves regardless of direction. It is always positive and is equal to the absolute value, or magnitude, of the displacement.
If one follows the rule of always subtracting the first position from the second, the sign always works out to be positive if the displacement is to the right and negative if the displacement is to the left.
HEY CAN ANYONE PLS ANSWER DIS!!!!!!!!!!!!!!!
Answer:
Explanation:
you can seperate mixtures by filtration, evaporation, distillation and chromatography.
Answer:
I think, i can separate the mixtures through
FiltrationMagnitizationeverpouration to drynessA 5000 kg truck and a 1000 kg car are traveling at constant speeds when they collide. What is true about the forces and accelerations on each?
Force is the physical action that can give acceleration to a body upon which it is applied
The true statements about the forces and accelerations of each when they collide are;
The force acting on the truck is equals the reactive force of the car The acceleration of the car is five times the acceleration of the truckThe reasons why the above statements are true are given as follows:
Known:
Mass of the truck, m₁ = 5,000 kg
Mass of the car, m₂ = 1,000 kg
Velocity of the truck = [tex]v_t[/tex]
Velocity of the car = [tex]v_c[/tex]
According to Newton's third law of motion, action and reaction are equal and opposite
The force applied by the truck, F = The reactive force by the carForce, F = Mass, m × Acceleration, a
Let a₁ represent the acceleration of the truck and let a₂ represent the acceleration of the car, we have;
F = 5,000 × a₁ = 1,000 × a₂
[tex]a_2 = \dfrac{5,000 \ kg}{1,000 \ kg} \times a_1 = 5 \cdot a_1[/tex]
Therefore;
The acceleration (rate of change of velocity) of the car, a₂ due to the collision is five times the acceleration of the truck due to the collisionLearn more about the about force and acceleration here:
https://brainly.com/question/579701
On Monday, Sylvester walked up 50 stairs in 1 minute. On Tuesday, Sylvester walked up 100 stairs in 2 minutes. Which best describes Sylvester's work and power? a.He did equal work and used equal power on both days. b.He did equal work both days, but used more power on Tuesday. c.He did more work on Tuesday, and used more power on Tuesday. d.He did more work on Tuesday, but used equal power on both days.
A gas is compressed to 75cm3 to a volume of 30cm3. Its temperature remains the same The pressure of the gas after it has been compressed is 110 Pa. What was the pressure before it was compressed?
Given parameters:
Initial volume = 75cm³
New volume = 30cm³
New pressure = 110Pa
Unknown:
Initial pressure = ?
Solution:
Condition: temperature is constant
We simply apply Boyle's law to this problem:
" the volume of a fixed mass(mole) of a gas varies inversely as the pressure changes if the temperature is constant".
Mathematically;
P₁ V₁ = P₂ V₂
where P and V are pressure and volume values
1 and 2 are the initial and final states.
Input the parameters and solve for P₁;
P₁ x 75 = 110 x 30
P₁ = 44Pa
The initial pressure is 44Pa
what is Newton's second law?
F=mXa
a=F/m
m=F/a
All of the above
It should be the first one, F= mXa (F = m times a).
Which statement describes an endothermic reaction? A. Energy is released by the reaction. B. Energy is absorbed by the reaction. C. No energy is transfered by the reaction. D. Energy is created in the reaction.
Answer:It's B energy is absorbed by the reaction,hope this helps
Explanation:
Any reaction in which energy is absorbed is said to be endothermic. Hence, option B is correct, but the rest are not correct.
What is an Endothermic Reaction?In every chemical process, energy is involved. When new bonds form in products, energy is produced. Reactant bonds are broken using energy. Exothermic reactions are those that produce more energy when new bonds form in the products than is needed to break existing bonds in the reactants.
In contrast, endothermic reactions are the opposite. Endothermic reactions release more energy when new bonds form in the products than is required to break bonds in the reactants.
During the reaction, a large amount of energy is absorbed.
To get more information about Endothermic Reaction :
https://brainly.com/question/23184814
#SPJ5
In february a little town received snow on a daily basis. The first day they had 10 inches, 3 inches the second, 7 inches the 3rd, and 4 inches on the fourth day. What was the average snowfall?
Answer:
The average is 6
Explanation:
To find the average, you have to first add all the numbers. After you add all the numbers up, then you divide by how many numbers there are. This one had 4 numbers so you divide by 4
The average snowfall of the four days was 6 inches.
What is snow?
When atmospheric water vapor freeze into small ice crystals and falling in small white flakes or lying on the ground as a white layer, it is called snow.
In the question it is said that,
Amount of snow received by the town on first day = 10 inches.
Amount of snow received by the town on second day = 3 inches.
Amount of snow received by the town on third day = 7 inches.
Amount of snow received by the town on fourth day = 4 inches.
Total amount of snow received by the town on these four days = ( 10 + 3+ 7 + 4) inches.
=24 inches.
Hence, average amount of snow received by the town on these four days = total amount of snow received ÷ 4
= ( 24 ÷ 4) inches.
= 6 inches.
Hence, the average snow received by the little town was 6 inches on those days.
Learn more about snowfall here:
https://brainly.com/question/28294667
#SPJ2
Question 12 (1 point)
[04.01)
What must happen for liquid water to become water vapor? (1 point)
a
Ob
The water molecules must lose energy and stop moving.
The water molecules must exert less pressure on their container.
The water molecules must gain kinetic energy
The water molecules must lose heat and gain volume.
С
Od
Answer:
C
Explanation:
How long does it take a cyclist to increase his velocity from 4.0m/s to 10m/s if he accelerates at 3.0m/s2
Which of the following statements is true?
Solar eclipses are safe to look at without special equipment.
The International Date Line runs through Greenwich, England.
New days begin at 180° longitude.
Earth's orbit is a perfect circle.
Answer:
New days begin at 180° longitude.
Explanation:
A motorcycle can reach a speed of 60 mi/hr much faster than a minivan can
Answer:
Newton's Second Law of motion
Explanation:
Newton's second law of motion states that 'the rate of change of the momentum of a body is directly proportional to, and in the same direction as, the net force acting on it.' This law applies to the given situation stating that 'a motorcycle can reach a speed of 60mph much faster than a minivan' as the smaller mass accelerates more quickly than the larger. This is because the van would require a more stopping distance as it would be difficult to decelerate due to the heavy mass. While for a motorcycle, it would be much easier to decelerate due to lesser mass. Thus, Newton's second law applies here.
an antonym of lithium (Li) forms and an iconic bond with atom of chlorine CI to form lithium chloride. how are the valence electrons of these atoms rearranged to form this Bond ?
Li , which is located in group 1 of the periodic table, has one valence electron.
Chlorine, which is in group 17 of the periodic table, has seven valence electrons.
When the two atoms bond, lithium will lose one electron and form the lithium cation, Li + .
Since it loses one electron 7-1 = 6, there will be 6 valence electrons.
The zygote eventually becomes a(n)
sperm
egg
baby
uterus
HURRY 30 MINUTES LEFT
(SCIENCE )
Answer:
baby
Explanation:
Answer:
The zygote eventually becomes a baby
Explanation:
Got it right on a unit test in edg 2020
How does using a ramp make work easier when loading a piano onto a truck three feet above the ground?
It allows a larger force to be applied over a shorter distance.
It allows a larger force to be applied over a longer distance.
It allows a smaller force to be applied over a shorter distance.
It allows a smaller force to be applied over a longer distance.
Answer:
It allows a smaller force to be applied over a longer distance.
Explanation:
A ramp is an example of an inclined plane that makes the movement of object easier above the ground level or higher surfaces.
In the given example, the sloping part of the ramp will support the weight of the piano as it moves up the slope and it will allow less force to be applied to move the piano above but the distance would be longer as the slant length or slope is the longest distance.
Hence, the correct answer is "d".
Answer:
D. It allows a smaller force to be applied over a longer distance.
Explanation:
Calculate the kinetic energy of a truck that has a mass of 2900 kg and is moving at 55 m/s.
Answer:
2900 divided by 55 is 52.727272727272727
If a wave has a period of 20 s, what is its
frequency?
Answer:
f = 1/T
= 1/20
= 0.05 Hz
Explanation:
Frequency of wave is 0.05 Hz
Given thatWave period = 20 seconds
Find:Frequency of wave
Computation;Frequency of wave = 1 / Wave period
Frequency of wave = 1 / 20
Frequency of wave = 0.05 Hz
Learn more:https://brainly.com/question/14295635?referrer=searchResults
whats an astral projection
Answer:Esotericism
Explanation:
it’s something that’s in intentional out of body experience
Answer:
Astral projection is a term used in esotericism to describe an intentional out-of-body experience that assumes the existence of a soul or consciousness called an "astral body" that is separate from the physical body and capable of travelling outside it throughout the universe.
Explanation:
What micro wave used for?
Answer:
Microwaves are widely used in modern technology, for example in point-to-point communication links, wireless networks, microwave radio relay networks, radar, satellite and spacecraft communication, medical diathermy and cancer treatment, remote sensing, radio astronomy, particle accelerators, spectroscopy, industria.
Explanation:
What is the pressure on a surface when a 20 N force is applied 10 m2, 5 m2, 2 m2
A boat is headed with a velocity of 18 meters/second toward the west with respect to the water in a river. If the river is flowing with a velocity of 2.5 meters/second in the same direction as the boat. What would be the magnitude of the boat’s velocity? A. 16.5 meters/second B. 20.5 meters/second C. 18 meters/second D. 2 meters/second E. 45 meters/second
Answer:
20.5
Explanation:
in this case, the two vectors are in the same direction, so they simply add:
total motion = 18m/s + 2.5m/s = 20.5m/s to the west
The cat quickly hopped from the floor onto the couch.
is an example of what? position, motion, speed, velocity or acceleration
Answer: Motion
Explanation:
What happens to the structure of an atom when the atom is ionised?
Answer: Explanation:
If the number of electrons is equal to the number of protons then the atom is uncharged and is electrically neutral. However, atoms can gain or lose electrons: increasing or decreasing the negative charge. Ionisation is the addition or removal of an electron to create an ion. ..Gaining an electron creates a negative ion.
A
1. Runners A, B, and C are running a race. Based on their locations, which 20 points
runner is experiencing acceleration?
Answer:
B) 48 metres
Explanation:
Question 2
When an object exerts a force on another object, the second force is
о O
AB
paired
B
oppoosite in direction
с
equal
D
all other answers
the answer is EQUAL because a force on another object the second force is equal
Please, can any one help
Answer:
a = 1.458 [m/s²]
Explanation:
To be able to solve this type of problems it is always advisable to make a free body diagram with the forces acting on the body.
Attached is an image with the free body diagram and the proposed equations, the explanation of obtaining the equations will be described below.
Let's take the movement to the left as positive, i.e. all forces going to the left have a positive sign.
Let's use Newton's second law, which tells us that the sum of forces on a body is equal to the product of mass by acceleration.
To the left we have the two forces of tension by the cosine of the angle. And to the right the frictional force. The resultant of these forces is equal to the product of the mass (mass of the child plus the mass of the sled), by acceleration.
a drum crane whirlwinds in 100m of cable when raising a load of 240N through a height of 10m an effort of 30 000 N is needed Calculate the efficiency showing how you obtained your answer
Explanation:
mark as brainliest plssssssssssssss!
A man jumps from an airplane and does not
open
his parachute immediately. As he falls,
two forces act on him: the force mg due to
gravity and the force n, of air resistance. Now
he opens his parachute and begins to fall at
constant velocity.
What forces act upon him now?
Answer:
The forces acting on a skydiver jumping from a plane include the gravitational force and air resistance
Explanation: i, dumb so this is proabaly wrong
Describe the position and velocity of the object based on the motion map.
Answer:
velocity is 1 m/s
Explanation:
Answer:
Include: The object starts away from the origin.
The object moves toward the origin at a constant velocity.
The object stops for one second.
The object moves away from the origin at a greater constant velocity.
Explanation:
Which of the following is NOT an acceleration?
O Riding your bike faster when you head down a hill
Slowing your bike so you can make it up a hill
O Coming to a stop at an intersection
Riding down the street at a constant velocity
Answer:
coming to stop at intersecton
Explanation do u not know what acceleration is?
In your own words, explain the difference between a conductor and an insulator.
(4th grade)
Answer: There are different kinds of conductors, most notably electrical and thermal conductors. But they are often inclusive of each other (electrical conductors are typically good thermal conductors). A conductor transmits something through its body with high efficiency while an insulator does not transmit very well. In the case of electricity, a conductor transmits electrical energy between two points while an insulator blocks the flow of electricity. Two examples of conductors are copper and silver. Two examples of insulators are wood and styrofoam.
Explanation: