The statement that is not true is ekman transport is another term for "thermohaline circulatio. These two terms are actually different concepts. Ekman transport refers to the net movement of water caused by the interaction between wind and the Coriolis effect.
On the other hand, thermohaline circulation refers to the large-scale movement of ocean water due to differences in temperature and salinity. The statement that is not true is: "Ekman transport" is another term for "thermohaline circulation .Ekman transport refers to the net movement of water perpendicular to the wind direction due to the Ekman spiral, which is affected by wind direction and the Coriolis effect. In contrast, thermohaline circulation refers to the large-scale movement of ocean water driven by differences in temperature and salinity, which leads to density differences and deep ocean currents. These are two distinct processes within the ocean circulation system.
learn more about ekman transport here
https://brainly.com/question/14440533
#SPJ11
a flywheel slows from 600 to 400 rev/min while rotating through 40 revolutions. (a) what is the angular acceleration of the flywheel? (b) how much time elapses during the 40 revolutions?
To find the angular acceleration of the flywheel that slows from 600 rev/min to 400 rev/min while rotating through 40 revolutions, we first need to convert the given speeds into radians per second.
1. Convert rev/min to rad/sec:
Initial speed (ω1) = 600 rev/min * (2π rad/1 rev) * (1 min/60 sec) = 62.83 rad/sec
Final speed (ω2) = 400 rev/min * (2π rad/1 rev) * (1 min/60 sec) = 41.89 rad/sec
2. Use the angular displacement (θ) formula:
θ = 40 revolutions * (2π rad/1 rev) = 80π rad
3. Use the angular acceleration (α) formula:
ω2^2 = ω1^2 + 2αθ
Solve for α:
α = (ω2^2 - ω1^2) / (2θ) = (41.89^2 - 62.83^2) / (2 * 80π) = -2.72 rad/sec^2
(a) The angular acceleration of the flywheel is -2.72 rad/sec^2.
To find the time elapsed during the 40 revolutions, we can use the formula:
4. Time (t) = (ω2 - ω1) / α
t = (41.89 - 62.83) / -2.72 = -20.94 / -2.72 = 7.70 sec
(b) The time elapsed during the 40 revolutions is 7.70 seconds.
To know more about angular acceleration refer here
https://brainly.com/question/29428475#
#SPJ11
If a physician sends a patient to a cardiologist, who happens to also be her husband, this may violate the Select one: a. anti-kickback law. b. Stark law. c. CLIA. d. False Claims Act.
The correct answer is Stark law.
Explanation:
The Stark Law, also known as the physician self-referral law , prohibits physicians from referring patients to entities in which they or their family members have a financial interest for certain designated health services under Medicare and Medicaid.
This law aims to prevent financial conflicts of interest that may influence medical decision-making.
In the given scenario, the physician is referring a patient to a cardiologist who happens to be her husband.
Since the cardiologist is a family member of the referring physician, this referral may violate the Stark Law if the patient is covered under Medicare or Medicaid and the cardiologist performs designated health services for the patient.
The anti-kickback law, CLIA, and False Claims Act are other healthcare laws that aim to prevent fraud and abuse in healthcare, but they do not specifically address the issue of physician self-referral.
To know more about self-referral law visit link :
https://brainly.com/question/1342578
#SPJ11
to say that electric charge is conserved is to say that electric charge is sometimes negative. is a whole number multiple of the charge of one electron. can be neither created nor destroyed. will interact with neighboring electric charges. may occur in an infinite variety of quantities.
Electric charge is conserved means that electric charge can neither be created nor destroyed. Option C is correct.
Electric charge is a fundamental property of matter that can exist in two forms: positive or negative. One important principle of electric charge is that it is always conserved, meaning that the total amount of charge in a closed system remains constant over time. This means that charge cannot be created or destroyed it can only be transferred from one object to another.
Charge is also quantized, which means that it exists in discrete packets or units, where the charge of one electron is the smallest possible unit of charge. Additionally, electric charges interact with each other through electric fields, and can occur in an infinite variety of quantities depending on the number and type of charged particles present in a system. Option C is correct.
The complete question is
To say that electric charge is conserved is to say that
A. Electric charge is sometimes negative.
B. Is a whole number multiple of the charge of one electron.
C. Can be neither created nor destroyed.
D. Will interact with neighboring electric charges.
E. May occur in an infinite variety of quantities.
To know more about the Electric charge, here
https://brainly.com/question/30490463
#SPJ1
air enters a converging-diverging nozzle with low velocity at 2.0 mpa and 100 c. if the exit area of the nozzle is 3.5 times the throat area, what must the back pressure be to produce a normal shock at the exit plane of the nozzle?
where Mach is the Mach number at the exit. Plugging in the values, we can find the pressure and temperature at the exit plane of the nozzle.
To solve this problem, we can use the equations for isentropic flow and normal shock wave relations.
First, we need to find the Mach number at the throat of the nozzle. We can use the isentropic flow equations for this:
Mach number at throat = sqrt(2/(gamma - 1) * [ (P_inlet/P_throat)^((gamma-1)/gamma) - 1 ])
where gamma is the ratio of specific heats for air (approximately 1.4), P_inlet is the inlet pressure (2.0 MPa), and P_throat is the pressure at the throat (unknown). Plugging in the values, we get:
Mach number at throat = sqrt(2/(1.4 - 1) * [ (2.0/ P_throat)^((1.4-1)/1.4) - 1 ])
Next, we can use the area ratio given to find the Mach number at the exit:
Area ratio = A_exit/A_throat = 3.5
Mach number at exit = sqrt( 2/(gamma + 1) * [ (P_exit/P_throat)^((gamma-1)/gamma) - 1 ] + 1 )
We can assume that the flow is choked at the throat, meaning that the Mach number at the throat is 1. To produce a normal shock wave at the exit, the Mach number at the exit must be greater than 1.4, which is the critical Mach number for air at 100 C. We can iterate on different values of P_exit until we find the value that gives a Mach number of 1.4 at the exit.
Once we have found the correct value of P_exit, we can use the normal shock wave relations to find the pressure and temperature at the exit:
P_exit/P_inlet = [(gamma+1)/2]^(gamma/(gamma-1)) * [ 1 + (gamma-1)/2 * Mach^2 ]^(-(gamma)/(gamma-1))
T_exit/T_inlet = [ 1 + (gamma-1)/2 * Mach^2 ]^(-1)
where Mach is the Mach number at the exit. Plugging in the values, we can find the pressure and temperature at the exit plane of the nozzle.
Visit here to learn more about isentropic flow : https://brainly.com/question/15276933
#SPJ11
If two people pull with a force of 1000 N each on opposite ends of a rope and neither person moves, what is the magnitude of tension in the rope?
The magnitude of tension in the rope is 1000 N.
Since the two people are pulling with equal and opposite forces, their forces cancel each other out and the net force on the rope is zero. However, according to Newton's third law of motion, every action has an equal and opposite reaction.
The rope is under tension because the two people are pulling on it. Since the forces that the two people apply to the rope are equal and opposite, the tension in the rope must also be equal to the force applied by each person, which is 1000 N. This tension is what prevents the rope from breaking or stretching, and allows the two people to pull on it without either of them moving.
To know more about the Force, here
https://brainly.com/question/30081011
#SPJ1
(240) (210-20(A))The maximum continuous load permitted on an overcurrent protection device is limited to _____ of the device rating.
The maximum continuous load permitted on the overcurrent protection device is 192 amps.
What is the maximum continuous load permitted on overcurrent protection?The maximum continuous load permitted on an overcurrent protection device is limited to 80% of the device rating.
To calculate this, first we need to find the value of 210-20(A) in the given expression:
240 - (210-20(A))
= 240 - 210 + 20(A)
= 30 + 20(A)
Now, according to the National Electrical Code (NEC), the maximum continuous load on an overcurrent protection device should not exceed 80% of the device rating. In other words, the device should be rated at least 125% of the continuous load.
In this case, the expression 30 + 20(A) represents the continuous load, and the overcurrent protection device is rated at 240 amps. Therefore, the maximum continuous load permitted on the device is:
80% of 240 = 0.8 x 240 = 192 amps
So, the maximum continuous load permitted on the overcurrent protection device is 192 amps.
Learn more about overcurrent protection
brainly.com/question/31456221
#SPJ11
A student pushes a 6kg box up an inclined plane with a height of 10m. How much work does gravity do on the box during this process?
During the process of the student pushing the 6kg box up an inclined plane with a height of 10m, gravity does negative work on the box, meaning it acts to decrease the box's kinetic energy.
The amount of work gravity does on the box can be calculated using the formula W = mgh, where W is the work done by gravity, m is the mass of the box (6kg), g is the acceleration due to gravity (9.8 m/s^2), and h is the height of the inclined plane (10m). Plugging in these values, we get W = (6kg)(9.8 m/s^2)(10m) = 588 J. Therefore, gravity does -588 J of work on the box during this process.
Hi! To calculate the work done by gravity on the box during this process, we need to consider the force exerted by gravity on the object and the vertical displacement of the object. The gravitational force (F) acting on the box is its mass (m) multiplied by the acceleration due to gravity (g), which is approximately 9.81 m/s². In this case:
F = m * g = 6 kg * 9.81 m/s² = 58.86 N
Now, we need to consider the vertical displacement, which is the height (h) the box is raised during the process. In this case, it's 10 meters.
The work done by gravity (W) is the force exerted by gravity (F) multiplied by the vertical displacement (h) and since gravity works against the student's force, the work done will be negative.
W = -F * h = -58.86 N * 10 m = -588.6 J
So, the work done by gravity on the box during this process is -588.6 Joules.
To know more about Student click here.
brainly.com/question/17332524
#SPJ11
39. in an expansion of gas, 500 j of work are done by the gas. if the internal energy of the gas increased by 80 j in the expansion, how much heat does the gas absorb?
According to the first law of thermodynamics, the change in internal energy of a system is equal to the heat added to the system minus the work done by the system:
ΔU = Q - W
where ΔU is the change in internal energy, Q is the heat added to the system, and W is the work done by the system.
In this case, we are given that the work done by the gas is 500 J and the change in internal energy is 80 J. So, we can rearrange the equation and solve for Q:
Q = ΔU + W
Q = 80 J + 500 J
Q = 580 J
Therefore, the gas absorbs 580 J of heat during the expansion.
To know more about first law of thermodynamics :
https://brainly.com/question/3808473
#SPJ11
True or False: If the temperature remains unchanged and the mixing ratio drops, the relative humidity will increase.
False. The relative humidity will decrease if the mixing ratio drops and the temperature remains unchanged.
Relative humidity is the ratio of the amount of water vapor present in the air to the maximum amount the air can hold at a given temperature, so if the amount of water vapor decreases (due to lower mixing ratio), the relative humidity decreases unless the temperature also decreases.
False. If the temperature remains unchanged and the mixing ratio drops, the relative humidity will decrease. This is because relative humidity is the ratio of the actual amount of water vapor in the air (mixing ratio) to the maximum amount of water vapor the air can hold at a specific temperature. If the mixing ratio decreases while temperature stays constant, the relative humidity will be lower.
To know more about Humidity click here .
brainly.com/question/22069910
#SPJ11
A spring (k 200 N/m) is fixed at the top of a frictionless plane inclined at angle 40 o (Figure). A
1. 0 kg block is projected up the plane, from an initial position that is distance d 0. 60 m from
the end of the relaxed spring, with an initial kinetic energy of 16 J. (a) What is the kinetic
energy of the block at the instant it has compressed the spring 0. 20 m? (b) With what kinetic
energy must the block be projected up the plane if it is to stop momentarily when it has
compressed the spring by 0. 40 m?
At the spring's maximum compression, the system's total mechanical energy (E) is 16 J.
In order to calculate the block's kinetic energy after compressing the spring by 0.20 m, we can apply the concept of mechanical energy conservation. As long as no external forces (like friction) are exerted on the block-spring system, its mechanical energy stays constant.
Due to its initial velocity and height above the ground, the block contains both kinetic energy (KE) and potential energy (PE). The block loses height as it ascends the slope, gains potential energy, and loses kinetic energy when the spring contracts.
The following provides the mechanical energy formula:
E = KE + PE
where PE stands for potential energy and KE for kinetic energy.
The block's initial kinetic energy is listed as 16 J. The following formula can be used to determine the block's initial potential energy:
PE = mgh
where m is the block's mass, g is its gravitational acceleration, and h is its height above the ground. Since the block is projected up the slope, the height h can be calculated as follows:
h = d₀×sinθ
where theta is the plane's angle of inclination and d₀ is the block's initial separation from the relaxed spring's end.
Given:
d₀ = 0.60 m
θ = 40°
m = 1.0 kg
g = 9.8 m/s²
Substituting these values into the equation for potential energy, we get:
PE = 1.0 ×9.8 × 0.60 × sin(40) = 3.94 J
So, the initial mechanical energy (E) of the block-spring system is:
E = 16 + 3.94 = 19.94 J
The spring comes to a brief rest at its maximal compression when the block compresses it by 0.20 m. All of the system's mechanical energy is now transformed into potential energy that is stored in the compressed spring. As a result, the block's kinetic energy at this precise moment is 0. J.
The conservation of mechanical energy to determine the kinetic energy with which the block must be accelerated up the incline in order to momentarily stop when it has compressed the spring by 0.40 m. the mechanical energy of the system is equal to the sum of the kinetic and potential energies when the spring is compressed to its maximum length. In this instance, the potential energy will be determined by multiplying the spring's maximum compression by its spring constant.
The following is the formula for the spring's potential energy:
P.Espring = (1/2)× k × x²
where k is the spring constant and x is the maximum compression of the spring.
Given:
k = 200 N/m
x = 0.40 m
Substituting these values into the equation for potential energy of the spring, we get:
P.Espring = (1/2) × 200 × (0.40)² = 16 J
The block's kinetic energy at this precise moment is zero J because it temporarily comes to rest at the point of the spring's maximum compression.
Therefore, the block must be launched up the incline with an initial kinetic energy of 16 J in order to momentarily stop when the spring is squeezed by 0.40 m.
To know more about spring's
https://brainly.com/question/16217373
#SPJ4
llison wants to calculate the speed of a sound wave.which formula should she use?iceairwooda drill laying on its sidea nail stuck into a piece of wooda hammer hitting a metal cupa wrench locked in place around a bolt
Allison can use the formula v = fλ to calculate the speed of a sound wave, where v is the speed, f is the frequency, and λ is the wavelength.
The medium through which the sound wave is traveling, such as ice, air, or wood, will affect the speed of the wave.
The other items listed, such as a drill, nail, hammer, and wrench, are not relevant to calculating the speed of a sound wave.
To calculate the speed of a sound wave, Alison should use the formula:
speed = distance / time
The other terms mentioned (ice, air, wood, a drill laying on its side, a nail stuck into a piece of wood, a hammer hitting a metal cup, and a wrench locked in place around a bolt) are not directly related to calculating the speed of a sound wave.
To learn more about sound wave click here
brainly.com/question/29071528
#SPJ11
6.5. What is the maximum height of a four inch-wide wire-glass glazing strip located in a Class B labeled fire door? A. 13.5 inches
B. 25 inches
C. Full height of a 10-foot-high door
D. No glazing is permitted
The maximum height of a four-inch-wide wire-glass glazing strip located in a Class B labeled fire door is B. 25 inches.
This is based on the requirements for fire-rated glazing in fire doors, which limit the size of the glazing to maintain the door's integrity and resist the spread of fire.According to the National Fire Protection Association (NFPA) 80, the maximum height of a four inch-wide wire-glass glazing strip located in a Class B labeled fire door is 25 inches. This requirement is in place in order to ensure that the fire door is able to provide an effective barrier against the spread of fire and smoke.
learn more about maximum height Refer: https://brainly.com/question/29219541
#SPJ11
An AC source is connected across a series combination of An inductive coil with specified resistance and inductive impedance of 65Ω and a capacitance with capacity of 49µF reached to resonance, find the resonance frequency?
Answer:
To find the resonance frequency of a series RLC circuit, we can use the formula:
f = 1 / (2π√(LC))
Where:
f = Resonance frequency
L = Inductance in henries
C = Capacitance in farads
π = 3.14159...
In this case, we are given the resistance and inductive impedance of the coil, but not its inductance. However, we know that the inductive impedance of a coil is given by:
XL = 2πfL
Where:
XL = Inductive impedance
f = Frequency
L = Inductance in henries
π = 3.14159...
At resonance, the inductive impedance of the coil will equal the capacitive reactance of the capacitor:
XL = XC
Where:
XC = Capacitive reactance
XC = 1 / (2πfC)
Substituting XL and XC into the equation above, we get:
2πfL = 1 / (2πfC)
Simplifying this equation, we get:
f = 1 / (2π√(LC))
Where:
L = XL / (2πf) = 65Ω / (2πf)
C = 49µF = 49 × 10^-6F
Substituting these values into the resonance frequency equation, we get:
f = 1 / (2π√(65Ω/(2πf) × 49 × 10^-6F))
Simplifying this equation, we get:
f = 1 / (2π√((3.385 × 10^-6)/f))
Multiplying both sides by 2π√((3.385 × 10^-6)/f), we get:
2π√((3.385 × 10^-6)/f) × f = 1
Squaring both sides, we get:
4π^2(3.385 × 10^-6)/f = 1
Solving for f, we get:
f = √((4π^2 × 3.385 × 10^-6))
f ≈ 1369 Hz.
Therefore, the resonance frequency of the circuit is approximately 1369 Hz.
what is the angular speed of the second hand the minute hand and hour ofa smoothly running anolag watch
Answer:
ω = 2 π f = 2 π / P
The second hand makes 1 revolution every 60 sec (P = 60 sec)
ω (second hand) = 2 π / 60 sec = .1047 / sec
The second hand makes 60 revolutions for 1 revolution of the minute hand since the minute hand revolves once every hour
ω (minute hand) = 1/60 * .1047 = .001745 / sec
The minute hand makes 60 revolutions in 1 hour or 12 * 60 = 720 revolutions for 1 revolution of the hour hand
.001745 / 720 = 2.424 * 10E-6 / sec
Calculate the instantaneous speed of an apple that falls freely from a rest position and accelerates at 10 m/s^2 for 2.0s .
The instantaneous speed of the apple after falling freely for 2.0 s with an acceleration of 10 m/s^2 is 20 m/s.
The instantaneous speed of the apple can be calculated using the following formula:
v = at
where "v" is the final velocity, "a" is the acceleration, and "t" is the time.
In this case, the acceleration is 10 m/s^2 and the time is 2.0 s. So we have:
v = 10 m/s^2 x 2.0 s
v = 20 m/s
Therefore, the instantaneous speed of the apple after falling freely for 2.0 s with an acceleration of 10 m/s^2 is 20 m/s.
Visit to know more about Instantaneous speed:-
brainly.com/question/2234298
#SPJ11
34. Two motorcycles are riding around a circular track at the same angular velocity. One motorcycle is at a radius of 15 m; and the second is at a radius of 18 m. What is the ratio of their linear speeds, v2/v1?
A) 1.0
B) 0.83
C) 1.4
D) 0.71
E) 1.2
The ratio of their linear speeds, v2/v1 is 1.2.
To find the ratio of their linear speeds (v2/v1), we will use the relationship between angular velocity (ω), radius (r), and linear speed (v), which is:
v = ω * r
Let v1 be the linear speed of the first motorcycle with a radius r1 = 15 m, and v2 be the linear speed of the second motorcycle with a radius r2 = 18 m. Since both motorcycles have the same angular velocity (ω), we can write the following equations for their linear speed:
v1 = ω * r1
v2 = ω * r2
Now, we want to find the ratio v2/v1. Divide the second equation by the first equation:
(v2/v1) = (ω * r2) / (ω * r1)
The ω terms will cancel out:
(v2/v1) = r2 / r1
Substitute the given values for r1 and r2:
(v2/v1) = 18 m / 15 m
Simplify:
(v2/v1) = 1.2
So the ratio of their linear speeds, v2/v1, is 1.2, which corresponds to option E.
learn more about linear speed Refer: https://brainly.com/question/13100116
#SPJ11
given that it takes 13 newtons to stretch a spring 0.2 meters from the equilibrium position, how much work is required to stretch the spring 0.3 meters from the equilibrium position?
It takes 13 newtons to stretch a spring 0.2 meters from the equilibrium position, approximately it will take 2.9 25 joules of work to stretch the spring 0.3 meters from the equilibrium position.
We first need to use Hooke's Law, which states that the force required to stretch or compress a spring is directly proportional to the displacement from its equilibrium position.
So, if it takes 13 newtons to stretch a spring 0.2 meters from the equilibrium position, we can set up the following equation:
F = kx
where F is the force (in newtons), k is the spring constant (in newtons per meter), and x is the displacement (in meters). Solving for k, we get:
k = F/x
k = 13 N / 0.2 m
k = 65 N/m
Now that we know the spring constant, we can use the formula for work:
W = (1/2)[tex]kx^2[/tex]
where W is the work done (in joules), k is the spring constant (in newtons per meter), and x is the displacement (in meters).
Plugging in the values for x (0.3 m) and k (65 N/m), we get:
W = [tex](1/2)(65 N/m)(0.3 m)^2[/tex]
W = 2.925 joules
Therefore, it takes approximately 2.925 joules of work to stretch the spring 0.3 meters from the equilibrium position.
To learn more about Hooke's Law, refer:-
https://brainly.com/question/29126957
#SPJ11
The work required to stretch the spring 0.3 meters from the equilibrium position is 2.925 joules.
The work required to stretch a spring is given by the formula:
[tex]W = (1/2)kx^2[/tex]
where W is the work done (in joules), k is the spring constant (in newtons per meter), and x is the displacement of the spring from its equilibrium position (in meters).
To find the spring constant, we can use the formula:
k = F/x
where F is the force applied (in newtons) and x is the displacement (in meters).
In this case, the force required to stretch the spring 0.2 meters is 13 N, so the spring constant is:
[tex]k = F/x = 13 N / 0.2 m = 65 N/m[/tex]
Now we can use the work formula to find the work required to stretch the spring 0.3 meters:
[tex]W = (1/2)kx^2 = (1/2)(65 N/m)(0.3 m)^2 = 2.925 J[/tex]
Therefore, the work required to stretch the spring 0.3 meters from the equilibrium position is 2.925 joules.
To know more about equilibrium :
https://brainly.com/question/30807709
#SPJ11
The distance between the plates of a capacitor is cut in half. By what factor does its capacitance change?
a. it is cut in half
b. it is reduced to one-fourth its original value
c. it is doubled
d. it is quadrupled
The correct answer is c. The capacitance is doubled. The capacitance of a capacitor is directly proportional to the area of the plates and inversely proportional to the distance between them. Mathematically, the capacitance (C) of a parallel-plate capacitor can be expressed as: C = εA/d
where ε is the permittivity of the medium between the plates, A is the area of each plate, and d is the distance between the plates.
If the distance between the plates is cut in half, then the capacitance of the capacitor will be doubled. This is because the capacitance is inversely proportional to the distance between the plates, so reducing the distance by a factor of 2 will increase the capacitance by a factor of 2.
Capacitance is a measure of a capacitor's ability to store electrical charge. It is directly proportional to the area of the plates and the permittivity of the medium between the plates, and inversely proportional to the distance between them. The formula for capacitance of a parallel-plate capacitor is given as:
C = εA/d
where C is the capacitance, ε is the permittivity of the medium between the plates, A is the area of each plate, and d is the distance between the plates.
When the distance between the plates of a capacitor is cut in half, the capacitance is doubled, as the distance between the plates appears in the denominator of the capacitance equation. The permittivity of the medium between the plates and the area of each plate remain the same. Therefore, the new capacitance (C') can be calculated as follows:
C' = εA/(d/2) = 2εA/d = 2C
where C is the original capacitance. This shows that the capacitance is doubled when the distance between the plates is halved.
Conversely, if the distance between the plates is doubled, the capacitance is halved. Similarly, if the area of the plates is doubled, the capacitance is also doubled, while if the permittivity of the medium between the plates is doubled, the capacitance is also doubled.
To know more about capacitance
brainly.com/question/28445252
#SPJ11
Question 80 Marks: 1 In distillation, sea water is heated to the boiling point and then into steam, usually under pressure, at a starting temperature of
Choose one answer. a. 278 degrees F b. 260 degrees F c. 250 degrees F d. 258 degrees F
In distillation, sea water is heated to the boiling point and then into steam, usually under pressure, at a starting temperature of b. 260 degrees F
Distillation is a common method for purifying and desalinating water, and it works by taking advantage of the different boiling points of the substances present in the mixture. By heating the sea water to 260 degrees F, the water vaporizes into steam, leaving behind the dissolved salts and other impurities.
The steam is then condensed back into pure water, which is collected separately from the remaining impurities. This process is widely used in various industries and for producing potable water in areas where fresh water sources are scarce or contaminated. It is essential to maintain the correct starting temperature for efficient distillation and to prevent damage to equipment and ensure the quality of the purified water. In distillation, sea water is heated to the boiling point and then into steam, usually under pressure, at a starting temperature of b. 260 degrees F
learn more about distillation here:
https://brainly.com/question/13345735
#SPJ11
After Punch Taut travels to Pentune, what actually happens to his mass and his weight?
After Punch Taut travels to Pentune, his mass remains the same as it is a measure of the amount of matter in his body which does not change with a change in location.
However, his weight will change as it is the measure of the gravitational force acting on his mass. The weight of Punch Taut will be different on Pentune compared to his weight on his previous location due to differences in the gravitational pull of the two locations. However, his weight changes because weight depends on both mass and the gravitational force acting on the object. If Pentune has a different gravitational force than Punch Taut's previous location, his weight will be affected accordingly.
To learn more about gravitational force visit;
https://brainly.com/question/12528243
#SPJ11
Lineweaver-Burke Plot
1) What is Km? The greater Km is?
2) What is Vmax?
Km is the substrate concentration at which the reaction rate is half of Vmax. The greater Km, the lower the enzyme-substrate affinity. Vmax is the maximum rate of reaction achieved by an enzyme at saturating substrate concentration.
The Lineweaver-Burk plot is a graphical representation of enzyme kinetics data used to determine the kinetic parameters of an enzyme-catalyzed reaction. Km is a measure of the affinity between the enzyme and substrate, with a lower Km indicating a higher affinity. Vmax, on the other hand, is a measure of the enzyme's maximum activity at saturating substrate concentrations.
The Lineweaver-Burk plot is used to determine both Km and Vmax from a series of enzymatic reactions at varying substrate concentrations. The greater the Km, the lower the enzyme-substrate affinity, which can be indicative of a weaker binding between the two molecules.
To know more about Lineweaver-Burke Plot, here
brainly.com/question/31497051
#SPJ4
14N = 3.5 kg × 4 m/sec²
What process would I need to get answer 14N?
The process that would be needed to get 14N as answer is exertion of force.
What is force?Force is a physical quantity that denotes ability to push, pull, twist or accelerate a body.
Force is an influence that causes the motion of an object with mass to change its velocity, i.e. to accelerate. It can be calculated by multiplying the mass of the object by its acceleration.
Force can be a push or a pull, always with magnitude and direction, making it a vector quantity.
According to this question, the following expression was given: 14N = 3.5 kg × 4 m/sec². In this expression,
3.5kg is the mass of the object 4 m/sec² is the acceleration of the objectLearn more about force at: https://brainly.com/question/26115859
#SPJ1
Three charges are placed as shown below. Determine the magnitude and direction of the net electrostatic force on charge q1. As part of the solution, include a force diagram.
d1= 1.5m
d2= 3.0m
q1=2.0uC
q2=-3.5uC
q3=5uC
1.8 x 10-3 N to the left is the strength and guidance of the net electrostatic force on q1.
Where may one find electrostatic force?The size of each charge & the separation between them determine how much electrostatic force there will be. When two charges of the same type are brought together, whether positive or Two charges positioned apart are subject to the electrostatic force., they repel one another.
What is electrostatic force, and what does it look like?The mathematical formula for the electrostatic attraction between two objects was initially published by a Frenchman named Charles Coulomb. The force between the charged points can be calculated using Coulomb's law. Its formula is F=k|q1q2|r2, where q1 as well as q2 correspond to two point charges that are separated from one another by r, and where k=8.99109Nm2/C2.
To know more about electrostatic force visit:
https://brainly.com/question/9774180
#SPJ1
If the ambient temperature is different than 86 degrees F (30 degrees C) AND there are more than three conductors in a conduit or cable, You must multiply by both the temperature correction factor and the bundle adjustment factor(True/False)
True. When there are more than three conductors in a conduit or cable, the heat generated by the current flowing through them can cause the temperature to rise above the ambient temperature.
In such cases, the ampacity of the conductors needs to be adjusted to account for the higher temperature. This is done by multiplying the conductor's ampacity by both the temperature correction factor and the bundle adjustment factor.
Similarly, if the ambient temperature is different than 86 degrees F (30 degrees C), the ampacity of the conductors needs to be adjusted to account for the temperature difference. This is also done using the temperature correction factor.
Therefore, when both of these conditions are present, it is necessary to use both the temperature correction factor and the bundle adjustment factor to properly calculate the ampacity of the conductors.
To know more about conductors click here:
https://brainly.com/question/18084972
#SPJ11
an outboard motor for a boat is rated at 55 hp. if it can move a particular boat at a steady speed of 35 km/h, what is the total force resisting the motion of the boat?
To calculate the total force resisting the motor of the boat, we can use the equation. Total Force = 0.5 x Density of Water x Cross-Sectional Area of the Boat x Drag Coefficient x [tex]velocity^{2}[/tex] + Weight of the Boat Since we are given.
The boat is moving at a steady speed of 35 km/h, we need to convert this to meters per second. 35 km/h = 9.72 m/s We are also given that the motor is rated at 55 hp, but we don't need to use this information to calculate the total force. Now, we need to estimate some values for the other variables in the equation. The density of water is approximately 1000 kg/[tex]m^{2}[/tex], the cross-sectional area of the boat is not given, and the drag coefficient varies depending on the shape of the boat. Let's assume a cross-sectional area of 10 [tex]m^{2}[/tex]and a drag coefficient of 0.5 which is typical for a boat of this size and shape. Using these values, we can calculate the total force as Total Force = 0.5 x 1000 kg/[tex]m^{2}[/tex] x 10 [tex]m^{2}[/tex] x 0.5 x 9.72 m/[tex]s^{2}[/tex] + Weight of the Boat We don't know the weight of the boat, but we can still solve for the total force. Simplifying the equation gives Total Force = 1182.2 N/[tex]m^{2}[/tex] x Weight of the Boat So, the total force resisting the motion of the boat depends on the weight of the boat. If we had that information, we could use the equation above to calculate the total force.
learn more about motor here.
https://brainly.com/question/29347921
#SPJ11
wave speed is equal to: question 20 options: wave height divided by frequency. wave height divided by period. wavelength divided by fetch. wavelength divided by frequency. wavelength divided by period.
Wave speed is equal to wavelength divided by period. The wave height refers to the vertical distance between the crest (highest point) and trough (lowest point) of a wave.
The frequency refers to the number of waves that pass a certain point in a given amount of time. The wavelength is the distance between two consecutive crests or troughs of a wave. However, none of these terms are directly related to the calculation of wave speed, which is determined by dividing the wavelength by the period (the time it takes for one full wave cycle to pass a given point).
learn more about frequency Refer: https://brainly.com/question/30783512
#SPJ11
based on the graph and your data, along what direction are the transmitted waves polarized when the transmitter is set to an angle of zero degrees? to answer, use the fact that the receiver detects only along the horizontal direction. support your answer using your results.
Simply remember that the direction on the electric field multiplied by the degree of the magnetic field's motion gives the direction on propagation in order to determine the direction of polarisation.
What are the magnetic field & its unit?A magnetic field is produced in the area surrounding a dipole of magnetic or a moving charge. Tesla (T) is used in the SI to represent magnetic field intensity. The region where a magnet's magnetic force may be felt is known as the magnetic field.
Why is there a magnetic field?By transferring electric charges, magnetic fields are created. The building blocks of everything are atoms, & each atom has an orbiting nucleus of protons and neutrons. Every atom has a weak magnetic field surrounding it because the orbiting electrons are tiny moving charges.
To know more about magnetic field visit:
https://brainly.com/question/23096032
#SPJ1
In a simple electric generator, a conducting loop of wire is placed in a magnetic field. The loop of wire is then rotated. Why is it
necessary for the wire to be rotated?
A. Its motion when it moves upward changes gravity into magnetism.
OB. Its motion through the magnetic field creates a current in the wire
OC. Its motion removes the magnetic field by using up the magnetic energy
D. Its motion through the air transforms heat into magnetism
In a simple electric generator, a conducting loop of wire is placed in a magnetic field. The loop of wire is then rotated because "Its motion through the magnetic field creates a current in the wire". The correct answer is B.
When a conducting loop of wire is placed in a magnetic field and rotated, it creates a current in the wire. This is due to the phenomenon of electromagnetic induction, which states that a changing magnetic field induces an electric current in a conductor.
As the wire loop rotates, the magnetic field passing through it changes, inducing an alternating current in the wire. This current can then be used to power electrical devices or stored in a battery. It is the motion of the wire through the magnetic field that generates the electric current, not the transformation of heat into magnetism.
Therefore, the correct answer is option B.
For more such questions on electric generator
https://brainly.com/question/15277088
#SPJ11
slide the wavelength bar to the highest possible value. what happens to the diffraction pattern? now slide the wavelength to the lowest possible value. what happens to the diffraction pattern?
When the wavelength is slid to the highest possible value, the diffraction pattern becomes more spread out and less defined. This is because longer wavelengths diffract more and have a lower resolution. On the other hand, when the wavelength is slid to the lowest possible value, the diffraction pattern becomes more narrow and defined.
This is because shorter wavelengths diffract less and have a higher resolution. In summary, the value of the wavelength directly affects the diffraction pattern, with longer wavelengths leading to more diffraction and lower resolution, and shorter wavelengths leading to less diffraction and higher resolution.A white piece of paper would have an identical reflectance curve for long, medium, and short wavelengths.
The perfectly reflecting surfaces of white piece of paper serve to completely reflect all incident radiations without any absorption or transmission. A white sheet of paper would therefore reflect all wavelengths equally, long, medium, and short.
Learn more about wavelength here
https://brainly.com/question/13533093
#SPJ11
which of the following is not a correct statement about the rotation of venus? a. venus has the longest rotation period of any planet in the solar system b. venus rotates in a retrograde way (east to west) c. venus rotates in roughly the same time period as earth d. the rotation rate of venus had to be determined from radar measurements e. the two definitions of a day (how long it takes for a star to return to the same position in the sky and how long it takes the sun to return to the same position) do not agree on venus
The rotation of Venus is c. Venus rotates in roughly the same time period as Earth.
Venus does have the longest day (rotation period) of any planet in the solar system, taking 243 Earth days to complete one rotation. Venus also rotates in a retrograde way, meaning it rotates from east to west, opposite to the direction of most planets in the solar system. The rotation rate of Venus had to be determined from radar measurements because its thick atmosphere makes it impossible to observe its surface features directly. Additionally, the two definitions of a day do not agree on Venus because its rotation period is longer than its orbital period around the sun, causing the sun to rise in the east and set in the west after a longer interval than on Earth.
learn more about time period Refer: https://brainly.com/question/17004122
#SPJ11