Radiant Energy from the sun is the source of the energy that plant cells use for photosynthesis. The first response is the correct answer.
Nearly all of the energy on Earth comes from the sun. Through a process known as photosynthesis, it enables plants and other organisms to convert water and carbon dioxide into sugars.
The function of sunlight in photosynthesis is to supply energy. Heat and light are two different types of energy that the sun emits.
Chlorophyll can capture energy, which can then be converted into sugar during photosynthesis. Photosynthesis slows down when a plant receives insufficient sunlight. This implies that the plant's energy source—sugar—might not be getting to it in sufficient amounts. We can clearly see how crucial sunlight is to life.
To learn more about photosynthesis, refer to the answer below:
https://brainly.com/question/19160081
#SPJ1
____ and ____ are the two subatomic particles found in an element's nucleus. Responses A neutrons, protonsneutrons, protons B protons, electronsprotons, electrons C electrons, neutrons
Considering the structure of the atom, neutrons and protons are the two subatomic particles found in an element's nucleus.
Structure of the atomAll atoms are made up of:
Protons: are positively charged particles and are located in the nucleus of the atom.Neutrons: are uncharged particles and have a mass size similar to protons. They are also located in the nucleus of the atom.Electrons: have a negative charge equal to 1 and have negligible mass. They move around the nucleus at different energy levels.In summary, protons and neutrons are part of their nucleus and electrons revolve around them. Protons are positively charged, neutrons are neutrally charged, and electrons are negatively charged.
Learn more about subatomic particle:
brainly.com/question/14989205
brainly.com/question/28686848
#SPJ1
5. The elevation of the Dead Sea is -1,286 feet. (The Dead Sea is below sea level.) Mt.
McKinley has an elevation of 20,320 feet. What is the difference in the elevation between
the Dead Sea and Mt. McKinley?
When is mass not conserved?
Mass is not conserved when the chemical reaction occurs inside the body.
What violates the conservation of mass?Mass is converted into energy when reactions within the mass occur. Nuclear reactions violate the law of conservation of mass. No new atoms are created during the reaction and no existing atoms disappear or are destroyed showing that mass is conserved. Mass can not be conserved because a little amount of mass turns into energy in every chemical reaction. But mass + energy is always conserved. Energy can only be created by destroying the specific amount of mass according to the equation of energy i.e. E = mc².
So we can conclude that nuclear reactions are the cause due to which mass is not conserved.
Learn more about mass here: https://brainly.com/question/19385703
#SPJ1
The following properties are either physical or chemical. Which one is different from the
rest based on those two categories?
A substance's ability to be observed or measured without altering its identity is referred to as its physical property. How successfully a substance can undergo a specific chemical transition is determined by its chemical characteristic.
What separates chemical characteristics from physical characteristics?A substance's ability to be observed or measured without altering its identity is referred to as its physical property. Physical characteristics might include things like color, density, hardness, melting, and boiling points, among other things. How successfully a substance can undergo a specific chemical transition is determined by its chemical characteristic.
What can be categorized into groups based on their chemical and physical traits?Based on their physical and chemical properties, materials can be grouped. Matter is anything that has mass and space. It is possible to mix any solid, liquid, and gas. When a substance changes from one state of matter to another without changing its chemical composition, a physical transition takes place.
To know more about Physical and Chemical Properties visit:
https://brainly.com/question/18327661
#SPJ9
During chemiosmosis, hydrogen ions accumulate in the ______ of the mitochondrion to create a large electrochemical gradient for aerobic cellular respiration.
In the course of chemiosmosis, hydrogen ions build up in the mitochondrion's intramembrane space to produce a significant electrochemical gradient for aerobic cellular respiration.
What is the chemiosmosis procedure?Protons are pumped through specialized channels in the mitochondrial membranes from the inner to the outer compartment during chemiosmosis. A gradient of proton (H+) is created by the pumping. Protons diffuse through a transport protein called ATP synthase to diffuse down the gradient once it has been formed.
How is ATP produced through chemiosmosis?Electrons are transferred from one molecule to another in the electron transport chain, and the energy released during these electron transfers is used to create an electrochemical gradient. The energy held in the gradient is utilized in chemiosmosis to produce ATP.
To know more about chemiosmosis visit:
https://brainly.com/question/15443163
#SPJ4
Indicate the oxidation state for each of the following:
phosphorus in P₂H₂
carbon in H₂C₂O4
chromium in CrO²-
P2H2 has an oxidation number of +1. In P2H2, the oxidation
number of H is -1
H2C2O4 Oxidation State - Oxalic AcidC has an oxidation number of +3 in H2C2O4. O has an oxidation
number of -2 in H2C2O4. H2C2O4 has an oxidation number of +1.
CrO2 Oxidation State - Chromium(IV) OxideCrO2 has an oxidation number of +4.
Explain oxidation?The oxidation state, also known as the oxidation number, is an atom's hypothetical charge if all of its bonds to other atoms were fully ionic.
The sum of the oxidation states of all the atoms in an ion equals the ion's charge.
A substance's more electronegative element is given a negative oxidation state. The one that is less electronegative is given a positive oxidation state.
To learn more about oxidation refer to :
https://brainly.com/question/27239694
#SPJ13
In 1983, a team of scientists discovered a fossilized bone of a giant bird when excavating land in
Brazil. After studying the fossil, the team thought that the bird was unique to South America but
had been extinct for millions of years. Many years later, another fossil from the same giant bird
was found in Nigeria. The two fossils were formed in rock that was very similar to one another.
By looking on the map and the fossil of bird found on different places shows that in past these land masses were connected.
What is Fossil?Fossils are defined as the geologically altered remainders of the living organism which are exist in the world once or its behaviour.
Types of FossilThere are basically five main types of fossil
Body fossilMolecular fossilTrace fossilCarbon fossilPseudo fossilIn 1983, a team of scientists discovered a fossilized bone of a giant bird when excavating land in Brazil. After studying the fossil, the team thought that the bird was unique to South America but had been extinct for millions of years. Many years later, another fossil from the same giant bird was found in Nigeria. The two fossils were formed in rock that was very similar to one another. This shows that the two land masses are connected.
Thus, we concluded that the fossil of bird found on different places shows that in past these land masses were connected.
learn more about fossils:
https://brainly.com/question/12334063
#SPJ13
the soaps, shampoos, and detergents, in addition to baking soda and washing soda, were diluted prior to use in the laboratory. a. why was it necessary to dilute these substances prior to determining their ph?
It is necessary to dilute the given substances prior to determining the pH because the concentrated solutions prevent contact with the pH meter and give lower values.
A solution's acidity may be determined by looking at its pH, which is a measurement of hydrogen ion concentration. Pure water slightly separates into ions with roughly equal amounts of hydrogen and hydroxyl (OH) ions.
Detergents, soaps, and shampoos all include surfactants, and when they are concentrated, their activity prevents the surfactant from making adequate contact with the pH meter's electrode, resulting in readings that are a little lower than they should be. The pH is determined correctly when the surfactant activity is diluted in the solution.
Learn more about pH of a solution here:
https://brainly.com/question/11300720
#SPJ4
no marks. to determine what portion of the question you have correct, check question score at the top of the assignment. indicate which molecule (a or b) in each pair has the higher boiling point. also indicate which force, hydrogen bonding (h), dipolar (p), or dispersion (d) is responsible for the difference.
Molecule (a or b) in each pair has the higher boiling point also indicate force, hydrogen bonding (h), dipolar (p), or dispersion (d) is responsible for the difference so in NH₃ and PH₃ the a molecule is high melting point and forces are dispersion force and in C₂H₅OH and CH₃OHCH₃ the molecule a has high melting point and has a dispersion force and C₄H₈ and C₁₀H₂₀ the b molecule has high melting point and has a dispersion force and in HCl and F₂ the a molecule has high boiling point and has a dipolar dipole interaction forces
The forces are electrostatic force between oppositely charged ions as in ionic bonds or through the sharing of electrons as in covalent bonds and there are four type of forces
Hydrogen bondingdipole-dipoledispersionIon dipoleSo here given molecule in that we have to seen the forces and high melting point so
NH₃ and PH₃ : NH₃ has high melting point than PH₃ and has dispersion forceC₂H₅OH and CH₃OHCH₃ : C₂H₅OH has high melting point than CH₃OHCH₃ and dispersion forceC₄H₈ and C₁₀H₂₀ : C₁₀H₂₀ has high melting point than C₄H₈ and dispersion forceHCl and F₂ : HCl has high boiling point than F₂ and has a dipole interactionKnow more about forces
https://brainly.com/question/14250723
#SPJ1
What is the word equation for KCIO4 → KCI + O₂
Answer:
KCIO4 → KCI + 2O2
Explanation:
KCIO4 → KCI + 2O2
What is activation energy?
Answer: The minimum amount of energy which the reacting species must possess in order to undergo a specified reaction.
Explanation:
A certain volume of gas was heated from 0°C to 25°C. The degree of change in Kelvin is?
Answer:
25 K
Explanation:
298-273=25 Kelvin
how much number of molecules are in 56 liter of c2o
the formation of from acetyl-coa and bicarbonate is the first step in fatty acid synthesis. the formation of from acetyl-coa and bicarbonate is the first step in fatty acid synthesis. malonyl-coa acyl-coa succinyl-coa propionyl-coa
The first step in the production of fatty acids is the conversion of acetyl-CoA to malonyl-CoA by the enzyme acetyl-CoA carboxylase.
Oxidation of a fatty acid :Starting at carbon atom 3, the -carbon of the fatty acyl chain, fatty acids undergo oxidative removal of successive two-carbon units as acetyl-CoA in the first step. Palmitoyl ACP is produced after a continuous cycle of transfer, elongation, reduction, dehydration, and reduction. The 16-carbon fatty acid palmitate is then released from the FAS by the FAS complex's thioesterase activity.
The process of oxidizing fatty acids to create acetyl-CoA. In essence, fatty acids produce NADH and FADH2 for every two carbons in the chain as they are broken down into an acetyl CoA.
To know more about oxidation :
https://brainly.com/question/16976470
#SPJ9
Clarice is doing a science experiment. She has a beaker containing 10 grams of sugar. She adds 5 grams of a mystery substance. After mixing the two together, a solid is produced and the container becomes very hot. No gases are released.
1. How many grams of the new substance should Clarice expect there to be in the jar at the end of the experiment?
2. What law supports this answer?
3. Explain how the law supports your answer.
1. The amount, in grams, of the new substance that Clarice should expect is 15 grams.
2. The law that supports the answer is the law of conservation of mass.
3. The law opines that mass is conserved in every chemical reaction.
What is the law of conservation of mass?The law of conservation of mass states that masses are conserved in chemical reactions. They can, however, change forms during the course of reactions.
In other words, if 10 grams of sugar reacts with 5 grams of another substance, the total amount of the final product should be the addition of the two masses. Unless parts of the reactants or products have been converted to something else that is not captured.
So, in the case of Clarice, the mass of the new substance that should be expected would be:
10 + 5 = 15 grams.
Since gases were not involved in the reaction and there is no mass loss in any other form. The mass of the final product should be 15 grams.
More on the law of conservation of mass can be found here: https://brainly.com/question/13383562
#SPJ1
what volume (ml) of 0.0755 m phosphoric acid can be neutralized with 130 ml of 0.245 m sodium hydroxide? what volume (ml) of 0.0755 m phosphoric acid can be neutralized with 130 ml of 0.245 m sodium hydroxide? 2340 141 1270 422 7.21
146 mL of 0.0755 m phosphoric acid can be neutralized with 130 ml of 0.245 m sodium hydroxide.
First of all, let's write a balanced equation.
The balanced equation is given below.
H₃PO₄ + 3 NaOH ⇒ Na₃PO₄ + 3 H₂O
Now calculate the moles of sodium hydroxide taking part in the reaction.
130 ml of 0.245 m sodium hydroxide react.
0.13 L x 0.245/L = 0.03185 moles
Now let's calculate the reacting moles of H₃PO₄.
The molar ratio of H₃PO₄ to NaOH is 1:3.
The reacting moles of H₃PO₄ are 1/3 x 0.03185 moles = 0.011 moles
Let's calculate the reacting volume of phosphoric acid
We have 0.011 moles of H₃PO₄ are in a 0.0755 M solution.
0.011 mol x 1L/0.0755 x 1,000 mL1/L = 145.6 mL (approx 146 mL)
If you need to learn more about sodium hydroxide click here:
https://brainly.com/question/27360637
#SPJ4
Watch the video of Norman. What type of energy transformation is happening?
Norman sliding his foot across the floor.
A Electrical energy is created by friction when his foot slides across the floor.
B The mechanical energy of his foot moving across the floor is transformed into chemical energy.
C When his foot is sliding across the floor, it creates heat energy through friction.
D When his foot rubs against the floor, the energy of motion changes into light energy.
Norman sliding his foot across the floor would create heat energy through friction (C)
When a person is sliding on the floor, the foot would rub against the floor. The process would result in friction between the feet and the floor.
In addition to that, the potential energy (resting energy) is getting converted to kinetic energy (energy resulting from motion). The difference between the energy of an object at resting state and motion would result in production of heat energy. This is caused mainly due to friction.
Thus, when Norman’s foot is sliding across the floor, it would create heat energy through friction.
To know more about Friction
https://brainly.com/question/13000653
#SPJ1
Do bacterial cells have DNA?
Answer: Yes, most bacterial cells have double stranded dna
Explanation:
Answer:
yes
Explanation:
prokaryotic cells are unique bacteria that has DNA. it has a single cell called nucleoid in a cytoplasm that organise DNA differently
scientist are always learning new things. which of the following shows how scientists use observations to gain new understanding about the world?
The statement scientists have discovered new planets orbiting a star by detecting a wobble in the star's motion shows how scientists use observations to gain a new understanding of the world (Option A).
What is a planet's orbit?A planet's orbit is a route that a planet as a celestial body has around its star in a star system. The orbit of a planet can be detected by observing the light emitted by the star, which is fundamental for astronomers.
Therefore, we can conclude that scientists discovered new planets through the identification of features associated with star's movement in space (Option A).
Complete question:
Scientists are always learning new things. Which of the following shows howscientists use observations to gain new understanding about the world?
A. Scientists have discovered new planets orbiting a star by
detecting a wobble in the star's motion.
B. Scientists hope to learn more about how many stars are in space.
C. Scientists wonder if other planets can support life, and some
scientists wonder if there are aliens.
D. Scientists are familiar with some galaxies, but they do not know
how many galaxies exist.
Learn more about the planet orbit here:
https://brainly.com/question/855117
#SPJ1
how many grams (g) of nacl are needed to make a 125 ml of 0.45m nacl solution? answering this question requires 3 steps.
Answer:
3.29 grams NaCl
Explanation:
I assume 0.45m is 0.45 molar. The m is usually capitalized, to prevent confusion with meters, moles, etc. : 0.45M
It is very useful to use of the definition of molar in the thought process.
The definition of molar, M, is moles solute per liter of solution. The term 0.45M NaCl means that a solution has 0.45 moles of NaCl in 1 liter of solution. a half-liter would have 0.225 moles of NaCl, which is equivalent to 0.45 moles/liter. in terms of concentration.
We'll need the molar mass of NaCl, which is:
Na: 23.0
Cl: 35.5
58.5 grams/mole
========
Now let's calculate how many moles of NaCl are needed. We want 125ml (0.125L) of 0.45M NaCl.
(0.45 moles NaCl/Liter)
multiply that by the actual volume required:
(0.45 moles NaCl/Liter)*(0.125Liter) = 0.0563 moles NaCl
[The liters unit cancels, leaving only moles NaCl. The units are helpful in understanding the mathematical steps required and help insure a correct answer.]
To get grams NaCl, multiply by the molar mass of NaCl:
(0.0563 moles NaCl)*(58.5 grams NaCl/mole NaCl) = 3.29 grams NaCl
Note the units: moles NaCl cancel, leaving grams NaCl.
=====
There is a useful relationship to remember concerning the dilution of a solution. It is not needed here, but it does highlight the usefulness of understanding units. When diluting a volume, V1, of a solution of concentration M1 to achieve a concentration and volume of of M2 and V2, we can use:
M1V1 = M2V2
Example: 125 ml of 1M HCl is needed for an experiment. The only supply is 5M HCl. How much of the 5M HCl is needed to make 125ml of the 1M HCl?
M1 = 5M HCl
V1 = The unknown
M2 = 2.5M HCl
V2 = 100 ml
M1V1 = M2V2
(5M)*(V1) = (1M)*(125ml)
V1 = (1M)*(125ml)/(5M)
V1 = 25 ml
25 ml of 5M HCl may be added to 75 ml of water (slowly) to form 100ml of 2.5M HCl.
===========
Extra material: This is not relevant to the original problem, but it demonstrates the importance of units and the fact that it is the moles of a substance that is the important element.
If the concentration and volume of M1V1 are in moles/liter and liter, the term M1V1 has units of:
(moles/Liter)*(L), which reduces to moles of the substance.
The same with the term on the right, M2V2: it also reduces to moles. So the equation is simply saying that whatever number of moles one starts with, the same number of moles will wind up in the final solution.
A bonus discovery is that the volume units cancel in this calculation. It seems unlikely, but this means the volumes don't need to be adjusted from ml to liters, since volume unit cancels out.
If the original problems stated that the goal is to make 125 ml of 0.45M NaCl from a stock of 1.0M NaCl solution, the calculation would be:
M1 = 1.0M NaCl
V1 = ?
M2 = 0.45M NaCl
V2 = 125 ml
M1V1 = M2V2
(1.0M)*(V1) = (0.45M)*(125ml)
V1 = 56.25 ml
68.75 ml of water may be added to 56.25 ml of NaCl to form 125 ml of 0.45M NaCl.
Although M is expressed as moles/liter, we don't need to convert the volumes to liters, because the M unit cancels out. That doesn't feel correct, but it is - the unit cancellation is legal.
if the distance traveled from city "A" to city "B" is 625 kilometers, how many meters, cm and mm is that?
625 km
1 km = 1000 meters
625 x 1000 = 625000 meters
1 meter = 100 centimeters
625000 x 100 = 62500000 centimeters
1 cm = 10 mm
62500000 x 10 = 625000000 millimeters
What are some Harmful effects of Nanoparticles in medicine
Explanation:
The effects of inhaled nanoparticles in the body may include lung inflammation and heart problems. Studies in humans show that breathing in diesel soot causes a general inflammatory response and alters the system that regulates the involuntary functions in the cardiovascular system, such as control of heart rate.
Helppp ASAP pleaseee
Answer:
1. B, E
2. A
Explanation:
HELP PLEASE HELP ASAP!!!! 20 points!!! COLLISIONS COVALENT
I don't know how to do this last level for Collisions "Covalent"
It is level 17 updated
The covalent compounds formed from the given elements are as follows:
Water, H₂ONitrogen trifluoride, NF₃Carbon (iv) oxide, CO₂What is the collision theory?The collision theory states that products are formed from reactants molecules only when effective collisions occur.
Effective collisions are those collisions in which the reactant molecules that collide have energy equal to or greater than the activation energy so that product molecules are formed from such collisions.
Considering the covalent molecules that are formed from the effective collision of the given elements:
The given elements that must collide to form products include:
HydrogenCarbonNitrogenOxygenFluorineThe given elements are all non-metals and the will most likely products that will be formed are covenant compounds.
Covalent compounds are compounds that are formed as a reseult of the formation of covalent bonds between elements. Covalent bonds are formed by electron sharing between those whose electronegativity differences are not large.
Therefore, compounds formed between the elements are covalent compounds.
Learn more about covalent compounds at: https://brainly.com/question/17900482
#SPJ1
Question 3
1 pts
To find the volume of your element, you completed wate displacement, which is
calculated by Final volume - Initial volume. Originally 13. mL of water was placed into
the graduated cylinder. After you object was placed into the graduated cylinder, the
water level raised to 19.5 mL. Calculate the volume of the object.
The volume of the object is calculated out to be 6.5 mL when the volume of your element completed displacement which is calculated.
What is the displacement and how the volume of the object is calculated out to be so?Displacement is the shortest distance between the initial point and the final point.Here in this question given the initial volume to be 13 mL , and the final volume to be 19.5 mL.To calculate the volume which is supposed to be the final volume , we will substract the volumes given.The substraction of the initial volume and the final volume would be 19.5 - 13 which equals 6.5 mL.This is how the final volume of the object is calculated out to be 6.5 mL.To know more about volume visit:
https://brainly.com/question/13338592
#SPJ13
You need to use your separatory funnel for an extraction, but you notice that there is some residual water in it from when it was washed during the previous lab period. What should you do?.
In this case, rinse the separating funnel with acetone into a garbage container and wash it again with soap and water before using it for the future experiment.
A separatory funnel, also called a separation funnel, separating funnel, or simply a sep funnel, is a piece of lab equipment used in liquid-liquid extractions to partition a mixture's components into two immiscible solvent phases of different densities. separating funnels must be free of pollutants that could lower the extraction's yield. After cleaning and rinsing, the funnel might be put in a desiccation to allow the water on the body to dry before being utilized for the subsequent extraction step. Standard laboratory procedures include washing all laboratory equipment before use, regardless of how clean it is.
To learn more about separatory funnel. Click, https://brainly.com/question/28624196
#SPJ4
What is the energy of a 4.25 x 10^8 Hz wave? *I'll reward Brainiest for the correct answer! I really need this, hah*
The energy of a 4.25 x 10⁸ Hz wave is 2.816 × 10-²⁵J.
How to calculate energy?The energy of a wave can be calculated by multiplying the Planck's constant by the frequency of the wave as follows:
E = hf
Where;
E = energy (J)h = Planck's constant (6.626 × 10-³⁴ J/s)f = frequency (Hz)According to this question, the frequency of a wave is given as: 4.25 x 10⁸ Hz. The energy can be calculated as follows:
E = 6.626 × 10-³⁴ × 4.25 x 10⁸ Hz
E = 2.816 × 10-²⁵J
Therefore, 2.816 × 10-²⁵J is the energy of the wave.
Learn more about energy at: https://brainly.com/question/8778393
#SPJ1
What is the maximum mass of S8 that can be produced by combining 94.0 g of each reactant?
8SO2+16H2S⟶3S8+16H2O
mass of S8 :
Mass of S₈ is 130 grams
Mass is a measure of the amount of matter that an object contains
Here given data is 94.0 g of each reactant and we have to find mass of S₈= ?
Here the reaction are given
8SO₂+16H₂S → 3S₈+16H₂O
So, 3 moles S₈ will be produced from 8 moles SO₂ and 16 moles H₂S and now determine how many moles of SO₂ and H₂S are actually present during this reaction and that will allow us to then calculate the maximum mass of S₈ that can be produced
For SO₂ = 94.0 grams/(64.1 g/mole) =1.44 moles SO₂
For H₂S = 94.0g H₂S (34.1 g/mole) = 2.70 moles H₂S
2.70 moles H₂S(3 moles S₈/18 moles H₂S) = 0.506 moles of S₈
The molar mass of S₈ is 257 g/mole.
Therefore, 0.506 moles S₈×(257 g/mole S₈) = 130 grams S₈
So S₈ = 130 grams
Know more about mass
https://brainly.com/question/10598056
#SPJ1
4. As you add neutrons to the simulation, which number is changing on the isotope symbol?
The chemical symbol
The atomic number
The number of protons
The mass number
Search up isotope phet simulation to answer
A polar organic solvent that is capable of forming intermolecular hydrogen bonds is called a polar _____ solvent. This type of solvent forms ion-dipole interactions with _____.
A polar organic solvent that is capable of forming intermolecular hydrogen bonds is called a polar protic solvent. This type of solvent forms ion-dipole interactions with anions.
What is a polar organic solvent?
Polar solvents are solvents that have both “positive” and “negative” charge at different places in their structures and will dissolve other polar substances. An example of polar solvent is Water; other polar solvents include acetone, acetonitrile, dimethylformamide (DMF), dimelthylsulfoxide (DMSO), isopropanol, and methanol.
Learn more on polar solvents from:
https://brainly.com/question/12973798?referrer=searchResults
#SPJ4