Which of the following statements are true of cancer types? Check all that apply. --
- Cancer is named according to the color the cells turn.
- Skin cancer is considered a very common type of cancer.
- Cancer is often named according to what body type it affects.
- Skin cancer is the least common type of cancer.

Given :

A mover slides a refrigerator weighing 650 N at a constant velocity across the floor a distance of 8.1 m.

The force of friction between the refrigerator and the floor is 230 N.

To Find :

How much work has been performed by the mover on the refrigerator.

Solution :

Since, refrigerator is moving with constant velocity.

So, force applied by the mover is also 230 N ( equal to force of friction ).

Now, work done in order to move the refrigerator is  :

[tex]W = Force\times distance\\\\W = 230 \times 8.1\ N\ m\\\\W = 1863\ N\ m[/tex]

Hence, this is the required solution.

Answer:

Approximately 1.02 seconds

Explanation:

Use the final velocity (vf) formula for a uniformly accelerated movement under "g" (acceleration of gravity):

[tex]v_f=v_i+g\,*\,t[/tex]

in our case:

[tex]10=0+9.8\,*\,t\\t=10/9.8\\t\approx 1.02\,\,sec[/tex]

Answer:

i don't know the correct answer

but this is what i found on web

Explanation:

Changes of state are physical changes in matter. They are reversible changes that do not change matter's chemical makeup or chemical properties. Processes involved in changes of state include melting, freezing, sublimation, deposition, condensation, and evaporation. Energy is always involved in changes of state.

Answer:

s = 3.26 m

Explanation:

Given that,

Water leaves at a speed of 8 m/s

We need to find the maximum height that steelhead can jump. Let it can jump to a height of h.

At maximum height, final speed is equal to 0. We can use third equation of motion to find the maximum height.

[tex]v^2-u^2=2as[/tex]

a = -g

[tex]-u^2=-2gs\\\\s=\dfrac{u^2}{2g}\\\\s=\dfrac{(8)^2}{2\times 9.8}\\\\=3.26\ m[/tex]

Hence, the maximum height is 3.26 m.

Answer:

[tex]0.566\; \rm N[/tex] (assuming that while the block is moving, the friction on the block is constant.)

Explanation:

The mechanical energy of a system is the sum of its:

Friction does work on the block as the block moves up the ramp. The amount of energy that the block-string system has lost would be equal in size to the work that friction has done on the block. The size of the friction on the block could thus be computed.

Before this block was released, the block-spring system has no kinetic energy because there was no movement. Assume that the system has no gravitational potential energy at that moment, either. The only type of mechanical energy in this system at that moment would be elastic potential energy: [tex]8\; \rm J[/tex] according to the question.

The question states that the ramp is [tex]53.0^\circ[/tex] above horizontal. Therefore, after the block has traveled [tex]3.00\; \rm m[/tex] (along the ramp,) the height of this block would have increased by [tex]\Delta h = 3.00\; \rm \sin\left(53^\circ\right) \approx 2.39591\; \rm m[/tex]. Calculate the corresponding gain in gravitational potential energy:

[tex]\begin{aligned}& m \cdot g \cdot \Delta h\\ &\approx 0.200\; \rm kg& \\\ &\quad\times 9.81\; \rm N \cdot kg^{-1} \\ &\quad \times 2.39591\; \rm m \\ &\approx 4.70077\; \rm J\end{aligned}[/tex].

On the other hand, the question states that the speed of the block ([tex]m = 0.200\; \rm kg[/tex]) at that moment is [tex]v = 4.00\; \rm m \cdot s^{-1}[/tex]. Calculate the corresponding kinetic energy:

[tex]\begin{aligned}& \frac{1}{2}\, m \cdot v^{2} = 1.6\; \rm J \end{aligned}[/tex].

Because the block was already released, there should be no elastic potential energy in the spring.

Hence, the mechanical of the block-spring system would be approximately [tex]4.70077\; \rm J+ 1.6\; \rm J \approx 6.30077\; \rm J[/tex].

Approximate the amount of mechanical energy that is lost:

[tex]8\; \rm J - 6.30077\; \rm J \approx 1.69923\; \rm J[/tex].

In other words, when applied over [tex]3\; \rm m[/tex], the friction on this block would do approximately [tex]1.69923\; \rm J[/tex] of work. Approximate the size of that friction:

[tex]\begin{aligned}F &= \frac{W}{s} \\ &\approx \frac{1.69923\; \rm J}{3.00\; \rm m}\approx 0.566\; \rm N\end{aligned}[/tex].

Answer:

The final velocity is 20 m/s.

Explanation:

Constant Acceleration Motion

It's a type of motion in which the velocity of an object changes by an equal amount in every equal period of time.

Being a the constant acceleration, vo the initial speed, and t the time, the final speed can be calculated as follows:

[tex]v_f=v_o+at[/tex]

The provided data is: vo=10 m/s, [tex]a=5\ m/s^2[/tex], t=2 s. The final velocity is:

[tex]v_f=10~m/s+5\ m/s^2\cdot 2\ s[/tex]

[tex]v_f=20\ m/s[/tex]

The final velocity is 20 m/s.

Answer: the last one

Explanation: it pushes the lid off in a upward motion

Answer:

the last one

Explanation:

Can you mark me as BRAINLLIEST, PLEASE!!!!!!!!!!!!

(○’ω’○)          (ToT)  ↖(^ω^)↗  -_-z  ◑﹏◐  囧    ^O^  B-)

Answer:

656.5 m/s

Explanation:

V = ? U = 0 m/s a = 5.05 m/s2 S = 65.0 m

V = u + 2as

V = 0 + 2× 5.05 × 65

V = 656.5 m/s

Answer:B

Explanation: i took the test and i got it right

Answer:

20 m/s^2

Explanation:

Use the formula Vf=Vi+at

Vf=100

Vi=0

a=?

t=5

Then solve for (a)

Answer:

The positions are  0.0194 m  and - 0.0194 m.

Explanation:

Given;

amplitude of the simple harmonic motion, A = 2.0 cm = 0.02 m

speed of simple harmonic motion is given as;

[tex]v = \omega \sqrt{A^2-x^2}[/tex]

the maximum speed of the simple harmonic motion is given as;

[tex]v_{max} = \omega A[/tex]

when the speed equal one fourth of its maximum speed

[tex]v =\frac{v_{max}}{4}[/tex]

[tex]\omega\sqrt{A^2-x^2} = \frac{\omega A}{4} \\\\\sqrt{A^2-x^2}= \frac{A}{4}\\\\A^2-x^2 = \frac{A^2}{16} \\\\x^2 = A^2 - \frac{A^2}{16} \\\\x^2 = \frac{16A^2 - A^2}{16} \\\\x^2 = \frac{15A^2}{16} \\\\x= \sqrt{\frac{15A^2}{16} } \\\\x = \sqrt{\frac{15(0.02)^2}{16} }\\\\x = 0.0194 \ m \ \ or\ - 0.0194 \ m[/tex]

Thus, the positions are  0.0194 m and - 0.0194 m.

The positions where the speed equals 1/4 of its maximum speed is mathematically given as

[tex]x \pm 0.0194[/tex]

Question Parameters:

an amplitude of 2.00 cm.

Generally, the equation for the speed of simple harmonic motion  is mathematically given as

[tex]v = w \sqrt{A^2-x^2}\\\\v=\frac{wA}{4}[/tex]

Therefore

[tex]w \sqrt{A^2-x^2}=\frac{wA}{4}\\\\x^2=A^2-A^2/16\\\\x=\sqrt{\frac{15A^2}{16}}[/tex]

[tex]x \pm 0.0194[/tex]

In conclusion, the positions are

[tex]x \pm 0.0194[/tex]

Read more about Speed

https://brainly.com/question/4931057

Answer:

a)t  = 1,43 s

b) V = 10,49 m/s

c) V₀ₓ = 10,49 m/s   ;    V₀y = 14,01 m/s

d) Vf = 17,5 m/s

Explanation:

According to the problem statement

V₀ = V₀ₓ    and  V₀y = 0

And at the end of the movement t = ?  the distance y = 10 m

Therefore as

h = V₀y - (1/2)*g*t²

Vertical distance y = h = 10 = V₀y*t - 0,5 (-9,8)*t²

10 = 4,9*t²

t² = 10/4,9    ⇒  t² = 2,04 s

t  = 1,43 s

a) 1,43 s is the time of movement

b) V₀ = V₀ₓ        V₀y = 0     and  V₀ₓ = Vₓ     ( constant )

Just before touching the ground, the horizontal distance is

hd = 15 = Vₓ * t

Then  15 /1,43 = Vₓ = V₀ₓ

Vₓ = 10,49 m/s

Then initial speed is V = 10,49 m/s    since V₀y = 0

Vf² = Vₓ² + Vy²

Vyf = V₀y - g*t

Vyf =  0 - 9,8 *1,43

Vyf = - 14,01 m/s

And finally the speed when the projectile strike the ground is:

Vf² = Vₓ² + Vy²

Vf = √ (10,49)² + (14,01)²

Vf = 17,50 m/s

Answer:

m = 50 [kg]

Explanation:

The potential energy can be calculated by means of the following equation.

[tex]E_{p}=m*g*h[/tex]

where:

Ep = potential energy = 735 [J]

m = mass [kg]

g = gravity acceleration = 9.81 [m/s²]

h = elevation = 1.5 [m]

Now replacing:

[tex]735=m*9.81*1.5\\m = 50 [kg][/tex]

Answer:

Momentum

Explanation:

In order for an object's momentum to change,a force must be applied for a period of time

Explanation:It is given that,

Mass of bumper car, m₁ = 202 kg

Initial speed of the bumper car, u₁ = 8.5 m/s

Mass of the other car, m₂ = 355 kg

Initial velocity of the other car is 0 as it at rest, u₂ = 0

Final velocity of the other car after collision, v₂ = 5.8 m/s

Let p₁ is momentum of of 202 kg car, p₁ = m₁v₁

Using the conservation of linear momentum as :

p₁ = m₁v₁ = -342 kg-m/s

So, the momentum of the 202 kg car afterwards is 342 kg-m/s. Hence, this is the required solution.

Answer:

1717 kg*m/s

Explanation:

found it put it in on acellus and it was right

The man is pulled upward by a net force of

∑ F = (86 kg) (1.35 m/s²) = 116.1 N

The net force is comprised of the tension T in the cable and the man's weight W, such that

∑ F = T - W = 116.1 N

T = (86 kg) (9.80 m/s²) + 116.1 N

T = 958.9 N ≈ 960 N

Electrical power can be defined as the product of Voltage and current. Thus, P = IV. Hence, Option D is the correct answer.

Thus, the formula for electric power,

P = IV watt

Where,

P - Power (Watt)

I - Current (Ampere)

V - Voltage (volts)

Electrical power can be defined as the product of Voltage and current. Thus, P = IV. Hence, Option D is the correct answer.

Learn more about Power,

https://brainly.com/question/27442707

#SPJ2

Answer:

its called photosynthesis  

Explanation:

when plants turn food into energy.  Photosynthesis is a process used by plants and other organisms to convert light energy into chemical energy and stored in the form of starch which can be used later.

Answer:

The answer would be photosynthesis

Explanation:

In this case plants convert light energy (1) into chemical energy, (in molecular bonds), through a process known as photosynthesis. Most of this energy is stored in compounds called carbohydrates. The plants convert a tiny amount of the light they receive into food energy. :)

Answer:

She applies 75N of force

Explanation:

F=ma

50=20(2.5)

F=30(2.5)

F=75 N

Answer:25 N

Explanation:

in the case shown below, the 1 kg rock rides on a horizontal disk that rotates at constant speed 5m/s is 25N

Speed is the ratio of distance with respect to the time in which the distance was covered. Speed is a scalar quantity as it does not have magnitude only have direction

The formula of speed can be represented as s=d/t, Where, s is the speed in m.s-1, d is the distance traveled in m, t is the time taken in s

Uniform speed is defined when the object covers equal distance at equal time intervals, variable speed is defined as when the object covers a different distance at equal intervals of times.

Average speed is defined as the total distance travelled by an object to the total time taken by the object.

Instantaneous speed is defined as when the object is move with variable speed, then the speed at any instant of time is known as instantaneous speed.

For more details regarding speed, visit

brainly.com/question/13263542

#SPJ5

Answer:

Explanation:

Position of n the order fringe = n λ D / d

for n = 2

position = 2 λ D / d

λ = 710 nm , D = 1.1 m

d = .65 x 10⁻³

position 1 = 2 x 710 x 10⁻⁹ x 1.1 / .65 x 10⁻³

= 2403.07 x 10⁻⁶ m

= 2.403 x 10⁻³ m

= 2.403 mm .

For λ = 655 nm

position = 2 λ D / d

λ = 655 nm , D = 1.1 m

d = .65 x 10⁻³

position 2 = 2 x 655 x 10⁻⁹ x 1.1 / .65 x 10⁻³

= 2216.91 x 10⁻⁶ m

= 2.217 x 10⁻³ m

= 2.217 mm .

Difference between their position

= 2.403 - 2.217 = .186 mm .

i think the answer is h if am wrong am sorry

Explanation:

Answer:

A hygroscopic substance is one that readily attracts water from its surroundings, through either absorption or adsorption.

Explanation:

A hygroscopic substance is one that readily attracts water from its surroundings, through either absorption or adsorption.

Answer:

STOP CHETING

Answer:

C is the answer to your question

Explanation:

Have a great day!!! :)

Answer:

A. 200m/s

Explanation:

Using the law of conservation of momentum expressed as;

m1u1 + m2u2 = (m1+m2)v

m1 and m2 are the masses of the object

u1 and u2 are the respective velocities

v is the common velocity

Given

m1 = 1.2kg

u1 = 0m/s (block is a stationary object)

m2 = 50g= 0.05kg

u2 = ?

v = 8.0m/s

Substitute the values into the formula and get u2 (speed of the bullet before hitting the block)

1.2(0)+0.05u2 = (1.2 + 0.05)(8)

0.05u2 = 1.25(8)

0.05u2 = 10

u2 = 10/0.05

u2 = 200m/s

Hence the speed of the bullet before it hit the block is 200m/s