which of the following is an intensive property of a sample of neon gas? a) its mass b) the number of neon atoms present c) its temperature d) its volume e) the number of moles of neon atoms present

By indicating that the number of hydrogen ions required to balance the positive charge on the cation is True, the formula for a base can be written down.

The hydroxyl ions (OH-) produced will mix with any hydrogen ions (H+) in the solution to generate water molecules (OH- + H+ = H2O), therefore we can also define a base as a substance that receives or accepts hydrogen ions (H+) that are already present in the solution.

Hydrogen is an alkali metal with one electron in the outermost shell. It loses one electron to create a cation, H+, much like alkali metals.

To know more about hydrogen ions visit:-

https://brainly.com/question/20309096

#SPJ4

She could say, "Tons with oppositely charged of Cl- and Na+ are electrical attracted to each other," in her explanation.

The main extracellular cationic and solute is sodium ion (Na+), which is crucial for the production of nerve impulses in cardiac and neurological tissue.

The predominant cation in extracellular environment is the sodium ion (Na+). Na+ can function as an essential intracellular second messenger upon entry into the cell, regulating a variety of cellular processes. Recent research has demonstrated that extracellular Na+ can play a significant signaling role in the up-regulation of Command is executed.

To know more about sodiun Na+ visit :

https://brainly.com/question/1496720

#SPJ4

The option C , Yes ,if you hurry up and adapt (acclimate) within 2 minute holding your breath is correct answer.

The right amount of  oxygen in blood is important. Too little oxgen and much oxgen are both harmful to health. Therefore, the body ciontrols  and regulatesthe amount of oxygen in blood at all times ,and the levelof oxygen in blood drops too low , the condition is called hypoxemia.

The option A, say sudden drops (10%) of oxygen is not sustainable, it is wrong because of the decrease of oxgen level it create the breathning problem.

The option B,yes  there is still lots of oxygen around, this option is correct the oxygen variation made many heath issues,but the option C is good answer for this question.

Option A is corect, countercurrent exchnge,,the two fluid moves in opposite direction with different heat,the maximum amount of heat transfer that can be obtained is higher incountercurrent, The countercurrent exchange is most suitable for urine purification,

Option B ,is wrong Concurrent exchange is two fluids moves in same direction it not gives 100%f freshwater

Urine treatment ; Heating the urine to evaporate the water and leaves the salt behind. The water vapor would then move to a condenser and be condensed as purified water .The salt remain, forming a brine solution with some of the remaining water. The brine would have to be recovered or thrown away periodically. this process would requires a lot of power to heat all the water boiling and to then cool the water vapor sufficiently to condensed it.

Option C: wrong  Reverse osmosis.Using high pressure cross  a very fine fitter or membrane to purify water.The water is separated from the salt Brine is created from the concentrated salt that have to be recoveredor periodically thrown away. This technology is often used in aridregion to convert and purify sea water into portable water.

Hence the option C is correct

To know more about atmospheric pressure here

https://brainly.com/question/15084928

#SPJ4

certain stable nuclide, after absorbing a neutron, emits an electron, and the new nuclide splits spontaneously into two alpha particles. the nuclide.37 X

What are a nucleon and a nuclide?

Summary. Nucleons are the protons and neutrons that make up the nucleus. An atom with a certain number of protons and neutrons is referred to as a nuclide. When an unstable nucleus spontaneously decays, it becomes radioactive, and the emissions it produces are collectively referred to as radioactivity.

ZA

​ X+01

​ x→2 24

​ α+ −10 β

∴Z+0=4−1=3

A+1=8

∴

37 X

Learn more about nuclide here:

https://brainly.com/question/9826865

#SPJ4

​

Water has a 4.18 J/g specific heat capacity at 0 °C. Since 1500 ml of water weighs 1500 g, the enthalpy change for a 24.2 to 25.9 degree Celsius temperature difference is 10659 per mole or 1065.9 for 0.1 mol.

Calculating a reaction's enthalpy change analytically is called calorimetry. Given by, is the calorimetric equation that links mass, temperature difference, and specific heat capacity (c).

q = mc ΔT

given that the water has a 1500 ml capacity. Since water has a density of 1 g/ml, its mass is 1500 g. Water has a specific heat capacity of 4.18 J/°C g. Therefore, the following formula is used to compute the thermal energy of the reaction:

q = 1500 g ×  4.18 J/ °C g × (25.9 - 24.2 °C)

= 10659 J/mol

Hence, for 0.1 mol 10659  × 0.1 = 1065.9 J is the heat energy change for the reaction.

To know more about  specific heat visit:-

https://brainly.com/question/11297584

#SPJ4

what grade is this for?

Explanation:

The blood interacts with the bicarbonate, C03²-, from the acid to balance it when acid is supplied to the blood buffer system.

A buffer is a substance that can withstand a pH shift when acidic or basic substances are added. Small additions of acid or base can be neutralized by it, keeping the solution's pH level largely constant. For procedures and/or reactions that call for certain and stable pH ranges, this is significant.

Buffer solutions can resist the pH change when a strong acid or base is added sparingly. A strong acid and also its salt can be used as a buffer. It is a mixture of sodium acetate and acetic acid, CH3COOH + CH3COONa.

To know more about buffer system visit:

https://brainly.com/question/22821585

#SPJ4

The sodium potassium pump transports Na+ out of the cell and K+ into the cell.

To learn more about sodium potassium pump, visit:

brainly.com/question/8507057

#SPJ4

An orbital energy level diagram for the ground state of a nitrogen atom is option A is correct.

Energy level diagram is defined as a visual representation of the energies of an atom's or molecule's various orbitals. The energy shifts when it switches between energy levels or when it jumps to a different shell. As a result, a shell also indicates an electron's energy along with its location, and these are known as energy levels.

Seven electrons make up the atom of nitrogen. Let's write the orbital notation of the atom in order to build the orbital energy level diagram: 7 electrons of nitrogen:

1s² 2s² 2p³

Thus, an orbital energy level diagram for the ground state of a nitrogen atom is option A is correct.

To learn more about energy level diagram, refer to the link below:

https://brainly.com/question/29358205

#SPJ1

Can u put the question in english

A chemical reaction that normally occurs in the cytoplasm of both prokaryotic and eukaryotic living cells is known as fermentation.

An anaerobic reaction is a biological or chemical process that doesn't need oxygen, such fermentation and glycolysis.

As a result, since fermentation is anaerobic, oxygen is not needed.

Lactic acid fermentation produces significantly less adenosine triphosphate (ATP) and is less effective than cellular respiration.

More high-energy intermediates that can be oxidized to produce adenosine triphosphate (ATP) are produced during cellular respiration than are produced during lactic acid fermentation.

In comparison to cellular respiration, lactic acid fermentation is often less effective and generates significantly less adenosine triphosphate (ATP).

As a result, the following phrases/words are the most suitable and accurate to fill in the blanks:

1)  cytoplasm

2) Anaerobic

3) Does not require

4)  Much less

To learn more about Fermentation, here :

https://brainly.com/question/29672886?referrer=searchResults

#SPJ4

Neither green algae nor embryophytes have a developed characteristic of having tissue that conducts water.

Embryophytes and aquatic "green algae" make up the majority of green plants.

Non-vascular plants lack the xylem and phloem that make up a vascular system.

Green algae are unable to grow as tall as the majority of vascular plants because they lack lignified water-conducting tissues.

What is xylem?

The vascular tissue is absent in green alge, which are divided into various unrelated families.

The majority of scientists believe that the xylem's real water conducting tissue is green. The tissue of the plant's vascula transports water and dissolved minerals from the roots to the rest of the plant while also offering structural support.

Tracheary elements are a general term for a variety of specialised water conducting cells found in xylem tissue.

Therefore, Green algae and embryophtes cannot be considered as both since they lack the xylem, a water-conducing tissue, and as a result cannot be both.

To learn more about xylem

Here: https://brainly.com/question/1412188

#SPJ4

The part of the third step when using stoichiometry to go from grams of a reactant to grams of a product is Mole ratio (option A).

Stoichiometry is the study and calculation of quantitative (measurable) relationships of the reactants and products in chemical reactions (chemical equations).

Stoichiometric problems involving reactants mass to products mass can be solved in four simple steps:

This suggests that the third step when using stoichiometry to calculate grams of a reactant or grams of a product is to find the mole ratio.

Learn more about stoichiometry at: https://brainly.com/question/9743981

#SPJ1

Answer:

 To anyone who's wondering, the fourth step is

      D. Molar mass of product

(I just took the test and got it right).

Explanation:

The potential energy is stored in magnet as it is moved away from the iron such that it does more work to attract it.

We know that the term potential energy has to do with an energy that a body does possess because it is found at a particular point. We can say that is the energy that is at a point.

We know that a magnet is a material that is able to pick up metals. Since the magnet can pick metals up, we say that the metals are magnetizable materials. Given the fact that iron is a metal it follows that iron is a magnetizable material.

The ability of the magnet to attract the iron depends on the distance of the iron from the magnet. Thus, the magnetic potential energy has a lot to do with the distance of the separtion between the magnet and the ion. The greater the distance between the iron and the magnet, the greater the work that is done by the magnet to attract the iron.

Learn more about magnets:https://brainly.com/question/2841288

#SPJ1

It is important to conduct multiple trials of an investigation to determine the melting point of ice in order to ensure accuracy and to account for any small variations or errors that may occur.

What is investigation?
Finding the response to a question using a variety of research techniques is the process of conducting a scientific investigation. An investigation typically starts when a person observes their surroundings and poses questions they are unsure of the answers to. After that, they conduct additional observations or design an experiment to verify a theory. The researcher could indeed present findings that make an attempt to address their questions by gathering and analysing data. The experiment may be changed by the researcher to test for variables they hadn't originally thought of. A scientific investigation's primary goal is to advance knowledge. Researchers can discover explanations for natural phenomena through research and experimentation, and they can then use their discoveries to address issues in the real world.

Melting point is an important physical property of a substance and accurate measurements are necessary for many scientific experiments. Conducting multiple trials and averaging the results will help to reduce the impact of any errors and ensure the most accurate measurement of the melting point.

To learn more about investigation
https://brainly.com/question/28041080
#SPJ4

Electrical Bonding Evidence Quick Check:

1. Melting point, boiling point, surface tension, and vapor pressure (D)

2. Deciding on the appropriate equipment (C)

3. Mix ice with water until equilibrium is reached but some ice remains that is no longer melting (B)

4. It ensures that results are accurate (A)

5. The student should take the average of the results from all four trials (D)

------------

These are all 100%! I just took the test and all my answers were correct! Hope this helps you <3

Answer: 4

Explanation:

The sodium potassium pump helps in maintaining the acid-base balance of the body and helps in proper kidney function.

--> sodium ions,

--> potassium ions,

--> calcium ions and

--> some amino acids.

There are two types of active transport which are divided according to the energy that is used to cause the transport. They include:

--> primary and

--> secondary active transport.

PRIMARY ACTIVE TRANSPORT

A typical example is the SODIUM-POTASSIUM PUMP( Na+ - k+). This is a transport process that pumps sodium ions outward through the cell membrane of all cells and at the same time pumps potassium ions from the outside to the inside. This pump helps to:

--> maintain the sodium and potassium concentration differences across the cell membrane

--> establish a negative electrical voltage inside the cells.

The mechanism or operation of the pump involves the following steps:

--> two potassium ions bind on the outside of the carrier protein and three sodium ions bind on the inside.

To learn more about sodium-potassium pump refer to:

https://brainly.com/question/11257671

#SPJ4

True, According to Mendeleev's periodic table when atoms are arranged in increasing no. of atomic mass some properties recur periodically, which later changed to the modern periodic law.

According to the contemporary periodic law, an element's physical and chemical characteristics are periodic functions of its atomic number.

From left to right across each row, scientists organized elements in increasing order of their atomic numbers. and found that items with identical features recur at predictable periods.

Thus, according to modern periodic law when elements are arranged in increasing order of atomic no. certain physical and chemical processes. recur periodically.

True, According to Mendeleev's periodic table when atoms are arranged in increasing no. of atomic mass some properties recur periodically, which later changed to the modern periodic law.

To refer more about the Modern periodic table visit:

https://brainly.com/question/15987580

#SPJ4

Answer: 5 and 11

Explanation:

protons= 5

neutrons=6

mass number= 6+5=11

Answer: The Rutherford model.

Explanation:

Earliest to Latest:

hard, indivisible spheres → mostly empty space → electrons shells outside a central nucleus

What are electron shells?

In chemistry and atomic physics, electron shells can be thought of as the orbits of electrons around the nucleus. The shells closest to the nucleus are ``1-shell'' (also called ``K-shell''), ``2-shell'' (or ``L-shell''), ``3-shell'' (or ``M-shell''), and so on. away The shells correspond to the principal quantum numbers (n = 1, 2, 3, 4...) or are labeled alphabetically with letters in X-ray notation (K, L, M,...). A useful guide to understanding the electron shells of atoms is to note that each row in the conventional periodic table of elements represents an electron shell.

What is nucleus?

The atomic number, or atomic number of a chemical element, is the number of electric charges in the nucleus. For normal atomic nuclei, this equals the number of protons, or the number of protons found in the nucleus of each atom of that element.

Therefore, Earliest to Latest:

hard, indivisible spheres → mostly empty space → electrons shells outside a central nucleus

To know more about electron shells, check out:

https://brainly.com/question/2263604

#SPJ4

The molar concentration of nitrate ions in the resulting solution is 0.20M.

Molar concentration, also known as molarity, quantity concentration, or substance concentration, is a unit used to describe the amount of a substance in a solution expressed as a percentage of its volume. The number of moles per liter, denoted by the unit symbol mol/L or mol/dm3 in SI units, is the most often used unit denoting molarity in chemistry. One mol/L of a solution's concentration is referred to as one molar, or 1 M.

Now let us come to our problem statement;

Nitrate from NaNO₃:

75.0 mL × 0.20 M = 15 mmol NaNO₃ = 15 mmol NO₃⁻

Nitrate from Ba(NO₃)₂:

25.0 mL × 0.10 M = 2.5 mmol Ba(NO₃)₂

2.5 mmol Ba(NO₃)₂ × [tex]\frac{2mmol NO3}{1mmol Ba(NO3)2}[/tex]  = 5.0 mmol NO₃⁻

So the final number of NO₃⁻ moles is (15 + 5) 20 mmol.

The final volume is (75 + 25) 100 mL.

So the molar concentration is:

20 mmol / 100 mL = 0.20 M

The molar concentration of nitrate ions in the resulting solution is 0.20M.

To refer more about molar concentration visit:

https://brainly.com/question/26528084

#SPJ4

The level of water in the graduated cylinder is 12.5 cm higher than the level of the water exposed to the atmosphere,  The total pressure of gases inside the graduated cylinder is 614 mmHg

given that :

The atmospheric pressure is 739 mmHg

The level of water in graduated cylinder = 12.5 cm = 125 mmHg

the expression for the pressure is given as :

P total = P atm - hρg

where , hρg = 125 mmHg

P atm = 739 mmHg

putting the values , we get :

P total = P atm - hρg

           = 739 mmHg - 125 mmHg

           = 614 mmHg

Thus, the total pressure inside the graduated cylinder is 614 mmHg.

To learn more about total pressure here

https://brainly.com/question/26555700

#SPJ4

The molar heat capacity of ethanol is 107 J⋅°C-1mol-1.

What is Molar Heat Capacity?

The amount of heat required to raise the temperature of 1 mole of a substance by 1 unit is known as the molar heat capacity, which is calculated by dividing heat capacity by the total number of moles.

The quantity and size of the substance have an impact on heat capacity, a complex property. A modified notion known as specific heat capacity, or just specific heat, is commonly used in physics. Because it is unaffected by the quantity of the substance, specific heat is a more useful characteristic.

The term "specific heat" refers to the amount of energy required to increase a substance's mass by one unit of temperature. It can be calculated quantitatively as the heat capacity of a substance divided by its mass.

q = amount of heat transferred

n = number of moles

c = molar heat capacity

ΔT = change in temperature

q=ncΔT

The molar heat capacity of ethanol is 107 J⋅°C-1mol-1.

Learn more about Molar heat Capacity from given link

https://brainly.com/question/15080895

#SPJ1

The volume will be 2400 ml.

The equation used here will be

M1 × V1 = M2 × V2

M1 = initial concentration

M2 = final concentration

V1 = initial volume

V2 = final volume

So according to the data;

M1 = 12m

M2 = 0.15m

V1 = 30ml

V2 = ?

By putting the values in the equation as follows;

M1 × V1 = M2 × V2

V2 = M1 × V1  / M2

By putting the values given in the question we will solve this question as follows

V2 =  12 × 30 / 0.15

V2 = 360 / 0.15

So the volume used will be;

V2 = 2400 ml

To look more about moles click here

brainly.com/question/26416088

#SPJ4

The mass and temperature of the first container are multiplied together, and the result is added to the product of the mass and temperature of the second container to get the water temperature of the combination.

After that, divide the result by the total water masses in each container.

The amount of heat that the calorimeter can hold for each degree Celsius increase in temperature is known as its heat capacity.

Experimental analysis is required to determine the calorimeter's heat capacity. Studying how warm and cold water are combined is the simplest technique.

Since we are aware that the final amount of our dilution will be 150mL.

learn more about calorimeter refer

https://brainly.com/question/1407669

#SPJ4

The most polar form is made up of the elements phosphorous and fluorine. P-F because P(EN 2.19) and F(3.98) have higher electronegativity differences than N(EN 3.04) and F. (3.98). 

The more polar the disparity, the greater it is.The bond that phosphorous forms with fluorine will be the most polar of all those mentioned because nitrogen is one of the most electronegative elements in the periodic table. Orbitals collide to form bonds, which can be classified as polar or nonpolar depending on their polarity. They are regarded as an ionic and covalent link in accordance with Fajan's rule, which explains the ionic and covalent character in a bond between two atoms. The difference in electronegativity between the two atoms that make up a bond determines its polarity. A nonpolar covalent bond will form between two atoms if their electronegativity is essentially the same.

To know more about electronegative visit

https://brainly.com/question/10531792

#SPJ4

Fertilizer could be the independent variable in the plant experiment. Fertilizer will be applied to certain plants but not others. To study the impact on the dependent variable, the scientists alter the amount of the independent variable (fertilizer) (plant growth).

The amount of fertilizer applied would be the independent variable in a study examining the impact of various fertilizer dosages on plant growth. The plant's growth in height or mass would be the dependent variable.

Therefore, The experimenter manipulates or modifies the independent variable, which is thought to have a direct impact on the dependent variable.

Learn more about plant here:

https://brainly.com/question/17872484

#SPJ1

The effective nuclear charge, denoted by the letter X, grows with period, and this is the right response to the question above.

Here, X stands for the effective nuclear charge. And it may be computed by deducting the number of core electrons from the amount of protons. The positive attraction that nuclear protons exert on valence electrons is known as the effective nuclear charge. Due to the shielding effect, the effective nuclear charge is always lower than the total amount of protons in a nucleus.

Despite the fact that nuclear charge rises as atomic number increases in both period and group. In a group and over a period, the effective nuclear charge exhibits opposing patterns. It increases along with period (due to increasing nuclear charge with no accompanying increase in shielding effect).  And decreases in group (although nuclear charge increases down a group, shielding effect more than counters its effect).

To know more about electrons visit:

https://brainly.com/question/1255220

#SPJ1