when the overcurrent protection for a conductor is located on the load end rather than the supply side of a conductor it is considered to be a(n) .

Answer:

Balanced forces will cause no change in the car's motion.

Explanation:

Balanced forces are 2 forces that are equal in opposite directions. This means they 'cancel each other out' in a way. Since both are equal, they cause no effect on the motion of the car

The ratio that measures the reasonableness of accounts receivable outstanding, and can be used to estimate the average collection period of accounts receivable is the accounts receivable turnover ratio.

The amount owed to a business for goods or services that have been delivered or utilized, but for which consumers have not yet made payment is known as accounts receivable, or AR. A current asset is defined as accounts receivable on the balance sheet. Any sum that clients owe for purchases they made with credit is considered AR. Account receivable is the term used to describe any unpaid invoices or cash that a business is owed by customers. Accounts that a company is entitled to get as a result of delivering a good or service are referred to by the phrase. Receivables, also known as accounts receivable, are a type of line of credit that a business extends to customers. Typically, the terms of receivables stipulate that payments must be made within a reasonable amount of time.

Learn more about accounts receivable here:

https://brainly.com/question/24261944

#SPJ4

No, the quantity of kinetic friction on a moving item is not affected by its speed.

The consistency of the speed is more crucial than the actual speed. As was mentioned the friction force needs to be cancelled out by a constant force. The applied force would be equal to the kinetic friction force if the motion was constant in speed.

Therefore, the kinetic friction coefficient is not affected by the relative speeds of the two objects. The types of surfaces in contact are the sole factors that affect the coefficient of kinetic friction.

For such more question on  kinetic:

brainly.com/question/20873134

#SPJ4

The nebular theory proposes the sun and planets formed from a rotating cloud of interstellar gases and dust called a Solar nebula

What is nebular theory?

The creation of solar systems is explained by the nebular theory. According to the explanation, stars are produced from clouds of interstellar gas and dust, and the term "nebula" is Latin for "cloud." It takes around 100 million years for an undifferentiated cloud to develop into a star system with planets and moons.

The nebular theory proposes the sun and planets formed from a rotating cloud of interstellar gases and dust called a solar nebula

According to the nebular theory, the Sun and all of the plants in the solar system descended from the solar nebula, an interstellar cloud of gases and dust. The term "nebula" itself is a Latin word for cloud. The nebula began to collapse over time, and the centre of the collapse (the central mass) eventually turned into a protostar.

It should be noted that this protostar was distinct from our current star in that it lacked the continuous nuclear fusion process that our stars do now. When nuclear fusion begins in the centre of a protostar, it transforms into a star.

To know about more nebular theory checkout https://brainly.com/question/4265547

#SPJ4

To measure the distance to nearby stars, astronomers use the effects of stellar parallax or by determination of distance by observing parallax works mostly for nearby stars (1).

Parallax is a method used by looking at the shift of two fixed points relative to one another seen from the observer's point of view. The parallax of a star is expressed in units of arc seconds, so this parallax is an angle, while the distance is expressed in units of parsecs with 1 parsec = 3.26 light years. The trigonometry parallax method can only be used to get the distance to the nearest stars, which is up to 100 parsecs.

To measure the distance of a star, astronomers do not use distance units such as meters or kilometers, but the Astronomical Unit, which is equivalent to the average distance between the Earth and the Sun, about 150 million kilometers.

The question is incomplete, it should be:

Based on what you know about measuring the distance to stars, select all of the correct statements from the following list?

1) Determination of distance by observing parallax works mostly for nearby stars.

2) For the distance to far stars, it is necessary to use spectroscopic parallax.

3) To determine the luminosity of a star, you must first know the distance.

4) There are no other stars within a parsec of the sun.

Learn more about the closest star here: https://brainly.com/question/21107590

#SPJ4

Mass of the brown. dwarf., M₂ = 4.132 * 10²⁷ kg

Let M₁ = Mass of the main-sequence star

M₂ = Mass of the brown dwarf

v₁ = speed of the main-sequence star

v₂ = speed of the brown dwarf

The system's average distance apart r₁ = r₂ = 1 AU

The brown dwarf's orbital speed is 22 times that of a star in the main sequence.

Consequently, v2 = 22 v1.

Considering that the Sun is a main-sequence star

2 * 1030 kg is the main-sequence star's mass.

Centripetal force: F = Mv2/r

M1v12 = M2v22 M2/M1 = v12/v22 M2/M1 = (1/22) M1v12 = M2v22/r2 M2v22/r2

2 M2/M1 = 0.002066 M2 = 0.002066M1 M2 = 0.002066*2*1030 M2 = 4.132*1027 kg

Learn more about Mass here:

https://brainly.com/question/117190

#SPJ4

The molar heating value in normal pressure is 116.49 J/molK or the molar heating value under continuous volume is 124.42 J/molK, according to the declaration.

Small units known as atoms, molecules, and ions make up all matter. These little particles vibrate back and forth or run into each other constantly. All is among a type of energy termed as heat (or thermal) energy, which is produced by the movement of particles.

Internal energy change:

Q = 84.0 J, V = 90 cm³ = 9.0E-5 m³, V' = 144.0 cm³ = 1.44E-4 m³, P = 1 atm

W = P(V'-V) = (1.013E5)(1.44E-4 - 9.0E-5) = 5.61 J

U = Q-W = 84.0-5.61 = 78.39 J

a). Molar specific heat

Q = nCp(T' - T) = (Cp/R) nR(T' - T) = (Cp/R) P(V' - V)

so Cp = RQ/[P(V' - V)] = 8.31*84.0 / 5.61 = 124.42 J/molK

b). Molar specific heat (constant v)

Cv=Cp - R = 124.8-8.31 = 116.49 J/molK

To know more about Heat visit:

https://brainly.com/question/29753339

#SPJ4

(a)The angular velocity v(d)' is 0.936 m/s

(b)The velocity of the sphere is 3 rad/s

Let us assume that

angular velocity of member ABC is v(d)'

velocity of the sphere = ω'

Write the moment of inertia of the member ABC

I(G) = 1/12 ML²

I(G) = 1/12*(2.4)(0.75m)²

I(G) = 0.112 kgm²

After the impact

ω = ω'(ccw)

ν'(G) = (L/4)ω' (upwards)

ν'(A) = (L/4) ω' (downwards)

Take the moments about B

m(d)v(d)(L/4) + 0 = m(d)v'(d)(L/4) + I(G)ω' + Mv'(G)(L/4)

m(d)v(d)(L/4) = m(d)v'(d)(L/4) + I(G)ω' + M(L/4)²ω'

m(d)v(d)(L/4) = m(d)v'(d)(L/4) + ] I(G) + M(L/4)² ]ω'

(0.8)(3)(0.75/4) = (0.8)v'(d)(0.75/4) + [ 0.112 + (2.4)(0.75/4)²

0.45 = 0.15v(d)' + 0.1963ω' -------------------- (eq1)

From the coefficient of restitution,

v(d)' - v(A)' = -e [ v(d) - v(A) ]

v(d)' - (L/4)ω' = -(0.5) [3-0]

v(d)' - (0.75/4)ω' = - 1.5

v(d)' - 0.1875ω' = - 1.5 ---------------------- (eq 2)

From eq 1 and eq 2

v(d)' = 0.936 m/s

ω' = 3 rad/s

Therefore, the angular velocity is 0.936 m/s and the velocity of the sphere is 3 rad/s.

To know more about velocity, refer: https://brainly.com/question/28738284

#SPJ4

Evaporation is a cooling process and condensation is a warming process.

Condensation is the transition of a region of matter from a gaseous state to a liquid state and the opposite of vaporization. This word most often refers to the water cycle. Condensation is the process by which water vapor becomes a liquid. This is the opposite of evaporation, which turns liquid water into vapor. Condensation occurs in one of two ways. When the air cools to its dew point or becomes saturated with water vapor, it can no longer hold water.

Evaporation is always a cooling process. For evaporation to occur, energy is needed by the liquid molecules that are changing phase into gas. This energy is taken from the surroundings in the form of heat energy. So when evaporation occurs, the temperature of the surroundings will decrease, making evaporation a cooling process.

Condensation occurs when warmer, moist air comes into contact with cooler surfaces such as frames, windows, and other superstructures, or cooler areas inside an insulating shell (where moisture has penetrated the vapor barrier).

Therefore, evaporation is a cooling process and condensation is a warming process.

To learn more about condensation, refer: https://brainly.com/question/26846050

#SPJ4

the speed of the upper end of the pole just before it hits the groundv  is = 7.27 m / s

Explanation:

At both the greatest and lowest points, we shall practise energy conservation.

first. The highest point

Em₀ = U

Em₀ = m g y

final. smallest point

At this point, we adjust the reference system so that the potential energy is 0

= K

= ½ m v²

how to conserve energy

Em₀ =

mg y = ½ m v²

v = √2 gy

v = √ (2 9.8 2.7) (2 9.8 2.7)

v = 7.27 m / s

To learn more about practise please click on below link

https://brainly.com/question/14192783

#SPJ4

Answer:

Check explaination

Explanation:

A - Transformer is the right option 100%

The force on each charge will be 16N. Two charges separated by one meter exert 1-N forces on each other. If the charges are pushed to 1/4 meter separation.

We have the following given data,

When, r=1m,F=1N

When, r=1/4m,F=?N

Solution,

Let, the distance is r.

The magnitude of the electric force between two charges is given by the following equation:

F=k.q1.q2/r2

the charges unchanged . this proportionality relation, let find the magnitude of force at  indicated distance.

Plugging in our values, we have

F=k.q1.q2/r2

F∝1/r2

F2/F1=r21/r22

F2=(r1/r2)2×F1

[Plug in the values. ]

F2=(4)

2×1 N

F2=16N

Therefore, the force will be

F2=16N

Other charges exert forces on electric charges; for instance, two positive charges may push apart or repel one another. To clarify, we say that an electric charge creates (or induces) an electric field all around it. Other adjacent charges are then affected by this electric field, applying forces to them.

In the same manner as F = mg determines the force on the mass m, F = qE determines the force on the charge. The analogy between gravity and electrostatics can be extended to include energy, but we'll get to that later.

Learn more about gravity here:

https://brainly.com/question/4014727

#SPJ4

Assumptions scientists make include:

a nature can be understood through systematic study.

All scientists make essential assumptions. One is determinism—the idea that every one events inside the universe, such as conduct, are lawful or orderly. the second one assumption is this lawfulness is discoverable.

Technological know-how operates on the assumptions that herbal reasons give an explanation for herbal phenomena, that evidence from the herbal world can inform us approximately the ones causes, and that these reasons are constant.

A hypothesis is an assumption, an concept this is proposed for the sake of argument so that it may be examined to look if it might be authentic. in the medical technique, the speculation is constructed earlier than any applicable research has been done, other than a fundamental historical past overview.

Learn more about scientific assumptions here:- https://brainly.com/question/19190545

#SPJ4

The age of the object can be found using the equation   [tex]t=\frac{1}{k}ln\frac{[A_{0} ]}{[A]}[/tex].

The rate of decay:

In contrast to chemical reactions, the decay of a certain nucleus cannot be predicted and is unaffected by physical factors like temperature. There are two factors that affect the rate of isotope decay. The average number of undecayed nuclei in the system must double, as must the rate of decay for undecayed nuclei. the isotope's stability because some decay more quickly than others. The number of nuclei that decay per second is determined by the rate of decay.

The rate of the Decay is given as

                   [tex]\frac{-dA}{dt} =k[A][/tex]

On integrating the above we have

                 [tex]ln\frac{[A_{0} ]}{[A]}=kt[/tex]

                         [tex]t=\frac{1}{k}ln\frac{[A_{0} ]}{[A]}[/tex]

The number of nuclei has no bearing on the likelihood that a fixed nucleus would decay. Each nucleus has a predetermined likelihood of decaying in a certain length of time. The number of decaying nuclei will rise as the number of nuclei increases, but that is actually to be expected.

It's similar to rolling a large number of dice; the proportion of dice showing a particular digit to the total number of dice you roll. Keeping with this scenario, let's say you take away a dice if it displays 1. This is comparable to the disintegration of a nucleus. The number of dice eliminated will initially be large, but as the number of dice decreases, so will the number being removed.

The age of the object can be found using the equation:

                            [tex]\frac{-dA}{dt} =k[A][/tex]

                             [tex]t=\frac{1}{k}ln\frac{[A_{0} ]}{[A]}[/tex]

Learn more about Radioactive Decay here

https://brainly.com/question/1236735

#SPJ4

A decrease in porosity occurs when rocks form joints or faults.

Option B is correct

Porosity is the entire available area for groundwater to live in. A rock's or sediment's porosity impacts how much water it can hold. The porosity of sediments and sedimentary rocks is influenced by the size, shape, and degree of sorting of the grains as well as the degree of cementation.

A good permeability must coexist with good porosity for groundwater to enter a rock. The pore gaps between the rock grains must be linked for a rock to be permeable and allow water to pass through it.

To know more about groundwater visit:-

https://brainly.com/question/14241380

#SPJ4

The unstretched length of the spring is 3.333 m

Calculation :

k = Spring constant = 1.5 N/m

g = Acceleration due to gravity = 9.81 m/s²

l = Unstretched length

Frequency of SHM motion is given by

[tex]f_{s} = \frac{1}{2\pi }\sqrt{\frac{k}{m} }[/tex]

Frequency of pendulum is given by

[tex]f_{p} = \frac{1}{2\pi }\sqrt{\frac{g}{l} }[/tex]

Given in the question

[tex]f_{s} = \frac{1}{2\pi }\sqrt{\frac{k}{m} }[/tex]     =  [tex]f_{s} = \frac{1}{2\pi }\sqrt{\frac{g}{l} }[/tex]

[tex]\frac{1}{2\pi }\sqrt{\frac{k}{m} }= \frac{1}{2}\frac{1}{2\pi }\sqrt{\frac{k}{m} }[/tex]  

l = [tex]\frac{4gm}{k}[/tex]

l = [tex]\frac{4*9.8*\frac{1.2}{9.8} }{1.44}[/tex]

l = 3.333 m

The unstretched length of the spring is 3.333 m

The word "force" has a precise meaning. At this level it is appropriate to describe the force as pushing or pulling. A force does not contain or "have within" an object. A force is applied from one object to another. The concept of force is not limited to living things and inanimate things

Learn more about force here : https://brainly.com/question/12785175

#SPJ4

The cord's tension remains constant during the movement at 28.0 N. 94.08 J is the change in the cart's kinetic energy during motion.

the force exerted on the cart is the tension T in the chord itself. so,

F=T

Calculate the displacement of the cart.

d=[tex]\sqrt{x_{1}^{2}+h^{2} } -\sqrt{x_{2}^{2}+h^{2} }[/tex]

subsitute 5.0m for x₁,1.0m for x₂,and 1.60m for h.

d=[tex]\sqrt{5.0^{2}+1.60^{2} } -\sqrt{1.0^{2}+1.60^{2} }[/tex]

d=3.36m

calculate the change in kinetic energy of the cart.

ΔK=Fd

substitute 28.0N for F and 3.36m for d.

ΔK=28.0×3.36

ΔK=94.08 J

Tension is a force that runs the length of a medium, particularly one that is conveyed by a flexible medium like a rope or cable.

An action-reaction pair of forces acting at either end of the aforementioned elements is what is referred to as tension. Consider a rope; aside from the endpoints, every section of the rope experiences tension force in both directions. The ends feel strained on one side and the force of the attached weight. The tension fluctuates in several places along the string.

Learn more about tension here:

https://brainly.com/question/29677323

#SPJ4

Lateral Lines - Protect the attack line from minor flare-ups.

Hose Packs - Get the next length to the appropriate location.

Anchor Points - The starting location for any progressive hose lay.

Hose clamps - Restrict water flow.

Hoseline tees -Addition of lateral lines.

A common variation of Flat Road is the Minuteman Road. Some ingenuity is required for loading, but loading is easier than 3-layer stacking. This load is popular because when the tube enters the structure it can be peeled off and deployed from the shoulders of the jet man.

The high flow usually straight jet main jet is created with a smooth bore tip or some type of combination nozzle. Separate the front-row players from the back-row players. One team should focus on attacking the flames directly, while the other team should concentrate on blocking the oncoming spread of the flames.

Learn more about Lateral Lines here:- https://brainly.com/question/19730925

#SPJ4

The speed and direction of piece b is 11.33m/s positive x direction.

Total momentum = 0 (at rest)

Applying conservation of linear momentum,

Momentum after explosion = momentum before explosion

MaVa + MbVb + McVc = 0

100(-60) + 150Vb + 70(86) = 0

Vb = 11.33m/s

Speed of Vb = 11.33m/s

In Newtonian mechanics, momentum is the result of an object's mass and velocity, more precisely linear momentum or translational momentum. This mechanical quantity is typical. It has. a direction. and a magnitude., making. it a vector. quantity. The momentum of an item is expressed as: [tex]displaystyle mathbf p =m mathbf v.mathbfp = m mathbf v[/tex]  if m is the object's mass and v is its velocity (also a vector quantity).

The kilogram metre per second (kg m/s), which is a unit of measurement for momentum in the International System of Units (SI), is a unit of measurement for a newton-second.

Learn more about Speed here:

https://brainly.com/question/17099737

#SPJ4

The magnitude of the force that the truck exerts on the car is same as the horizontal force exerted by the car on the truck that is 1600 N.

In physics, a force is a force that can change the motion of an object. A force can change the velocity of an object with mass. Pressure can also be intuitively described as pushing or pulling. A force has both a value and a displacement, making it a vector quantity.

Squeeze is pushing and pulling, which affects daily life because people without strength cannot open and close objects, lift arms and legs.

Reason :

This question is a simple application of Newton's third law, which states that if an object A exerts a force on an object B, then B must exert a force on A that is equal in magnitude but opposite in direction.

The car pushes against the ground with a force of 1600 N, so therefore the ground must exert a force on the car, also of 1600 N.

Learn more about Force here:-

https://brainly.com/question/12785175

#SPJ4

The mass of the crate when it is directed up the incline will be equal to 5.8 kg that is option C is correct.

This problem can be solved using the concept of Newton's second law of motion. The mathematical expression of this will be

F = ma

where F is the force, m is mass and a is the acceleration.

Now, net force will be expressed as

Fₙ = 40N - mg (sin 30°) = m(2 m/s²)

where 40 N is the force parallel to incline and mg (sin 30°) is the vertical component of force.

From this we solve for m as

m = 40/6.9

m = 5.8 kg

Learn more about acceleration at:

brainly.com/question/460763

#SPJ4

Newton's Law of acceleration best describes why this occurs.

Newton's second law - the law of acceleration (acceleration = pressure/mass). Newton's 2d regulation states that the acceleration of an item is without delay related to the net pressure and inversely associated with its mass. Acceleration of an object relies upon on  things, force and mass.

The legal guidelines are: (1) each item movements in a straight line except acted upon by way of a pressure. (2) The acceleration of an item is without delay proportional to the internet pressure exerted and inversely proportional to the object's mass. (3) For every motion, there may be an same and opposite reaction.

Learn more about acceleration here:- https://brainly.com/question/460763

#SPJ4

The electric field at the center of the metal ball due only to the charges on the surrounding of the metal ball is 0 N/C.

The electric field is defined as the force acting on a positive test charge, per unit charge. units are thus N/C for the electric field. It is similar to the gravitational field on the surface of the Earth for a test mass mo

The electric field is a vector field. It has a magnitude and a direction. Another example is vector field is the wind distribution. Temperature distribution is an example of a scalar field.

Lines indicate the direction of F if a test charge is placed there, Field lines point away from positive charge, and toward negative charge, density of lines indicates the strength of the field.

Field lines cannot cross. If they did, there would be more than one possible direction for a particle to travel at a given point. The lines themselves have no meaning the field is present everywhere.

Since metal ball is considered as a solid sphere So the electric field inside metal ball is given by E=(p/3Eo)г

Where r is the distance from center and rho is charge density. Hence at the centre r=0

Then electric field =(p/3Eo)* 0 = 0 N/C

Hence electric field at the centre of the metal ball due to it's own charge only is 0  N/C.

To  know more about electric field here

https://brainly.com/question/19878202

#SPJ4

If the block's mass is m, block's initial velocity is v and the spring constant is k, the maximum compression in the spring is  sqrt(mv² /k)

Applying the law of conservation of energy, since it is a frictionless surface, all the kinetic energy of the block will be converted to the potential energy of the spring.

The kinetic energy of the block:

Ek = 1/2 . mv²

Where:

m = mass of block

v = block's initial velocity

The potential energy of the spring:

Ep = 1/2 . kx²

Where:

k = spring constant

x = maximum compression in the spring

It holds:

Ek = Ep

1/2 . mv² =  1/2 . kx²

x = sqrt(mv² /k)

Hence, the maximum compression in the spring is sqrt(mv² /k)

Learn more about spring's energy here:

https://brainly.com/question/19024537

#SPJ4

The rope's force on the car, in terms of magnitude, is [tex]8.3 *10^{3}[/tex] N

A man ties a rope firmly around the front bumper of his car and an 18-meter utility pole in an effort to free it from the mud. Then, with a force of 550 n, he pushes sideways on the rope at its middle, shifting the rope's center by 0.30 m, but the automobile scarcely moves.

At first, we evaluate the angle, then with its help of it, we shall evaluate the magnitude of the force.

Measured from the dotted line, the angle of each rope half is

θ = [tex]tan^{-1} (\frac{0.30m}{9.0m} )= 1.9[/tex]

When we examine the forces at the "kink" (where F is applied), we discover

t = 2sinθ/F = 2sin1.9/550 = [tex]8.3 *10^{3}[/tex] N

The rope's force on the car, in terms of magnitude, is [tex]8.3 *10^{3}[/tex] N

To read more about forces, visit https://brainly.com/question/13191643

#SPJ4

The magnitude of the force on the car from the rope is 8.3*10³ N

Force is the amount of energy applied to displace the position of any object. This force has magnitude and direction and so is called the vector quantity.

Here, in this question,

Given,

Distance = 18 m

Midpoint force = 550 N

Displacement of the center of the rope = 0.30 m

The rope when tied then it will also show a force which is the tension force (t).

We know that tension t

t = 2sinθ / F

But we are not aware about the value of θ

so

we will first find the value of θ by

θ = tan⁻¹(0.30/0.9) = 1.9

We got the angle to be 1.9, now we can easily find the force in the rope as

t = 2 sin 1.9 / 550

 = 8.3 * 10³ N

Therefore, the magnitude of the force on the car from the rope is 8.3*10³ N.

To know more about force, refer: https://brainly.com/question/13314666

#SPJ4

exothermic reaction is  the bonds that are broken during the reaction are weaker than the bonds that are formed during the reaction.

Exothermic reactions are those in which the system releases heat into the environment. The temperature of the surroundings rises because it is absorbing heat from the system. Heat is released during the combustion of methane gas, making the reaction exothermic. Specifically, 1mol of methane burns to produce 890.4 kilojoules of heat energy. There are two ways to represent this data as a component of the balanced equation. First, the product side of the reaction can be used to record the amount of heat released. Another option is to write the H information as 890.4kJ, with a negative sign. In an exothermic reaction, the product's bonds are stronger than those of the reactants and have a higher bond energy.

To know more about  exothermic reaction visit : https://brainly.com/question/29206227

#SPJ4

The time of the travel with 20m/s is 17.5 seconds. Thus, the final velocity of the car will be 63 m/s.

Velocity of an object is the measure of the distance travelled per unit time. The rate of change in velocity is called the acceleration.

Given that, initial velocity u = 20 m/s

distance = 350 meters.

time of travel = distance/ velocity

 = 350 m/20 m/s = 17.5 s.

Acceleration = 2.5 m/s²

the final velocity v = u + at.

v = 20 + (2.5 × 17.5 ) = 63 m/s.

Therefore, the final velocity of the car is 63 m/s.

To find more on velocity, refer here:

https://brainly.com/question/18084516

#SPJ1

The radius of strut so that the round and struts have same cross-sectional area = 2.764 mm and the critical load of a strut =  3.95*[tex]10^{-3}[/tex].

Let Radius for a round strut = 'r'

Now, Square Strut:

As, method Cross Section is 24 X 1 ([tex]mm^{2}[/tex])

So, Area, A' of cross-section = 24*1 = 24 [tex]m^{2}[/tex]

>> As, Area of round cross-section, A = pi*[tex]r^{2}[/tex]

Now, Given that, Both have same cross-section area

=> pi*[tex]r^{2}[/tex]  = 24

Solving,

=> r = radius of round cross-section = 2.764 mm

>> Now, According to Buckling Criteria,

Critical Load for a Stru, Pcr = (pi*[tex]r^{2}[/tex]*E*I)/Le[tex]q^{2}[/tex]

>> Now, as both Struts or columns are simple supported at both ends

So, Leq = L = 1 m

Also, E = 200 GPa = 200*[tex]10^{9}[/tex] N/m2

Now, I = Moment of Inertia

As, For Round Strut,

I = pi*[tex]r^{4}[/tex]/4 = pi*2.7644/4 = 45.837 = 45.837*[tex]10^{-12}[/tex]

=> Pcr = pi*[tex]r^{2}[/tex]*200*109*45.837*10-12/12

Solving,

=> Pcr = 0.0905 kN  (CRITICAL LOAD FOR ROUND)

>> Now, For Strut,

As, Buckling places about axis with minimum Moment of Inertia

So, Imin = a*[tex]b^{3}[/tex]/12 = 24*1*1*1/12 = 2   = 2*  [tex]10^{-12}[/tex]

So, Putting every values in Critical Equation:

Pcr = p[tex]i^{2}[/tex]*200*[tex]10^{-9}[/tex]*2*[tex]10^{-12}[/tex]/12

=> Pcr = 3.95*[tex]10^{-3}[/tex] kN (REQUIRED CRITICAL LOAD STRUT)

Learn more about critical load visit: brainly.com/question/28145392

#SPJ4

The laser beam emits 1.939 x 10¹⁷ photons after being activated for 0.050 seconds.

A laser emits an extremely focused beam of energy that may be used in a variety of equipment and technologies. Laser Amplification by Stimulation of Radiation Emission is what the letters in the term laser stand for. Light Amplifier by Stimulated Radiation Emission is what the elements in the term laser stand for.

As we are aware,

This pace of energy is equivalent to power in numbers.

As things evolve throughout time,

using mathematics,

power : P = E /t

Total Energy : E = P t

= (1.5)(0.050)

= 0.075 J

The laser beam's wavelength is = λ = 514 nm

One photon's energy is given by E ' = h c /λ

= (6.626068 × 10⁻³⁴ )(3 x 10⁸)/(514 x10⁻⁹)

= 0.03867 x 10⁻¹⁷ J

The amount of photons the laser beam emits:

= (total energy) / (energy per photon)

= 0.075 J / 0.03867 x 10⁻¹⁷ J

= 1.939 x10¹⁷ photons

To know more about Laser visit:

https://brainly.com/question/27853311

#SPJ4

On the runway, aeroplanes accelerate between 115 and 160 mph (ca. 257 km/h). However, the precise acceleration is influenced by the plane's model, the weather, and other elements.

Seat belts will definitely feel under strain, and loose objects will become displaced. Considerable, sudden changes in height, attitude, and typically, large variations in indicated airspeed are all symptoms of severe turbulence. There's a chance the jet will briefly lose control.

Therefore, In general, tiny planes need the least amount of acceleration to take off, whereas commercial planes need the greatest.

Learn more about acceleration here:

https://brainly.com/question/12550364

#SPJ1