Answer:Critical Thinking
Explanation:
7.2 in college success text back
what are two examples of population distribution?
three short square wood blocks measuring 3.5 per side support a machine weighing 29500 lbs. What is the compressive stress in the blocks
A. 798lbs
B. 421lbs
C. 1404lbs
D. 803lb
Answer:
D. 803 lbs
Explanation:
In order to find the compressive stress on all three blocks we first need to find the normal surface area of each:
Surface Area of 1 Block = 3.5 x 3.5
Surface Area of 1 Block = 12.25
Surface Area of all 3 Blocks = A = 3 x 12.25
Area = 36.75
Now, the stress is given by the following formula:
Stress = Force/Area
Stress = 29500 lbs/36.75
Stress = 802.72 lbs
Hence, the correct option will be:
D. 803 lbs
Calculate the velocity of the bicyclist between 0 and 3 seconds.
Answer:
is there an equasion it gives you?
Explanation:
need a little more info.
Sound travels at a rate of 340 m/s in all directs through the air. Matt rings a very loud bell at one location, and Steve hears it some time later at his location 450 meters to the south. How long did it take the sound to travel from the bell to Steve’s location?
Answer:
It will take about 1.32 seconds to travel to his location.
Explanation:
Considering the sound travels at 340 m/s, then if a person is at a distance of 450 m m from the bell, we can use the velocity formula to find the answer;
[tex]velocity=\frac{distance}{time} \\340\,\frac{m}{s} =\frac{450\,\,m}{t} \\t=\frac{450}{340} \,s\\t\approx 1.32\,\,s[/tex]
Answer:
b
Explanation:
Question 3
A box is being pulled by a rope that makes a 25 degree angle with the ground. The
pulling force is 100.0 N
along the rope. Find the horizontal and vertical components of the force vector.
A. 90.63 N, 42.26 N
B. 86.87 N, 32.17 N
C. 60.87 N, 75,63 N
D. 80.9 N, 45.5 N
What is the answer A,B,C or D?
Answer:
A
Explanation:
You stand at the top of a cliff while your friend stands on the ground below you. You drop a ball from rest and see that it takes 1.7s for the ball to hit the ground below. Your friend then picks up the ball and throws it up to you, such that it just comes to rest in your hand. What is the speed with which your friend threw the ball
Answer:
16.7m/s
Explanation:
Using v= u+ at
V = final velocity. U = initial velocity
So since the two movements are the same they will return with the same speed they went up
Then final velocity v= 0
So
0:= u +-9.8 x 1.7
U= 16.7m/s
a steel ball bearing will sink in water but a large ship floats because
Answer:
water displacement.
the bigger the item means more water displacement meaning bouyance
Do states give up all power to withdraw when they join a union of states, or do they still retain some control over their fate?
What is the speed of an object that travels 20 meters in 4 seconds?
Given:-
Distance covered by the particle (s) = 20 mTime taken (t) = 4 secondsTo Find: Speed of it.
We know,
v = s/t
where,
v = Speed,s = Distance &t = Time taken.Putting the values,
v = (20 m)/(4 s)
→ v = 5 m/s (Ans.)
The speed of an object will be "5 m/s".
The given values are:
Distance,
d = 20 mTime,
t = 4 secondsAs we know, the formula:
→ [tex]Distance (d)= Speed (v)\times Time (t)[/tex]
or,
→ [tex]Speed (v) = \frac{Distance (d)}{Time (t)}[/tex]
By putting the values, we get
→ [tex]= \frac{20}{4}[/tex]
→ [tex]= 5 \ m/s[/tex]
Thus the above answer is correct.
Learn more:
https://brainly.com/question/18660562
Question 5
Thermal energy can increase even if the average kinetic energy is constant.
O True
O False
The statement "thermal energy can increase even if the average kinetic energy is constant" is definitely true.
What do you mean by Kinetic energy?Kinetic energy may be characterized as a type of energy that an object possesses due to its motion. It is defined as the work that is required to accelerate a body of a given mass from rest to its stated velocity. It measures the work an object can do by the virtue of its motion.
The thermal energy will still enhance even if the average kinetic energy remains constant. This is because it is based on the relationship between kinetic energy and thermal energy. Kinetic energy is defined as the energy possessed by an object or body as a result of its motion.
Therefore, the statement "thermal energy can increase even if the average kinetic energy is constant" is definitely true.
To learn more about Thermal energy, refer to the link;
https://brainly.com/question/19666326
#SPJ6
Which phrase describes a scientific law?
A. A statement that matter cannot be created or destroyed
B. A claim that experiments cannot verify whether matter has been
destroyed
O C. An explanation for why matter cannot be created or destroyed
D. A prediction of how much matter exists in the universe
SUBMIT
In
Answer:
C- An explanation for why matter cannot be created or destroyed
Explanation:
Answer: A. A statement that matter cannot be created or destroyed.
Explanation:
Apex
A car travels 82 meters do North and 14 seconds the car turns around and travels 44 m due south in four seconds what is the magnitude of the average velocity of the car during the full travel time?
Answer:
2.11 m/s
Explanation:
Take north to be positive and south to be negative.
Average velocity = displacement / time
v = (82 m + -44 m) / (14 s + 4 s)
v = 2.11 m/s
The velocity is positive, so it is 2.11 m/s north. The magnitude of the velocity is 2.11 m/s.
How many Newtons of force does it take to move a 53 kilogram object?
is the
What is the tendency to move to a drive-free state?
O A. Homeostasis
OB. Equality
OC. Homogeneity
OD. Motivationless
A box measures 3.12 ft in length, 0.0455 yd in width and 7.87 inches in height. Since volume can be found using length x width x height, find the volume in cubic centimeters. Now find the volume in gallons.
Explanation:
This problem is on units conversion
given the dimensions
3.12 ft in length,
0.0455 yd in width and
7.87 inches in height
we have to convert to cm first
3.12 ft to cm=
1 ft-------30.48cm
3.12--------x
x=95.09cm
0.0455 yd to cm
0.0455yd ft to cm=
1 yd-------91.44cm
0.0455--------x
x=4.16cm
7.87 in to cm
1 in-------2.54cm
7.87--------x
x=19.98cm
the volume is =95.09cm*4.16cm*19.98cm
volume= 7907.45cm^3
the volume in gallon is
1 cm^3------0.000264172gal
7907.45cm^3-------x
x=7907.45*0.000264172
x=2.088gallons
If you were told an atom was an ion, you would know the atom must have a ______?
O Neutral Charge
O Charge
O Negative Charge
O Positive Charge
(This is due Tonight, so please help me ASAP!!!)
Answer:
charge
Explanation:
7r0I and its etc. ,"!×_/;
Explain How can you
use a distance-time graph
to calculate average
speed?
Explanation:
Average speed = change in distance / change in time
In other words, the average speed is the slope of the line connecting two points on the graph.
the graph shows position versus time for an object moving with the constant acceleration. what is the final velocity of the object at t=10s? assume the initial velocity at the origin is 1 m/s.
3.32 m/s
4.0 m/s
3.0 m/s
3.8 m/s
Answer:
3.0 m/s
Explanation:
The equation of motion for constant acceleration (a) is ...
[tex]x(t)=\dfrac{1}{2}at^2 +v_0t+x_0[/tex]
The problem statement tells us v₀ = 1, and we read from the graph that x₀=1. We also read from the graph that x(10) = 21. Filling these values into the equation, we can find a and x'(10).
[tex]21 = \dfrac{1}{2}a(10^2)+1(10)+1\\\\10=50a\qquad\text{subtract 11}\\\\a=\dfrac{1}{5}\\\\x'(t)=at+v_0\\\\x'(10)=\dfrac{1}{5}\cdot 10+1=3.0[/tex]
The final velocity of the object at t=10 s is about 3.0 m/s.
_____
Comment on the graph
We note this graph better represents increasing acceleration than it does constant acceleration. x(2) = 3.4 per the equation. It is graphed as about 4.
Answer:
thanks for de points
Explanation:
The mass of a string is 20 g and it has a length of 3.2 m. Assuming that the tension in the string is 2.5 N, what will be the wavelength of a travelling wave that is created by a sinusoidal excitation of this string with a frequency of 20 Hz. Provide the wavelength in units of m. Please note: You do not include the units in your answer. Just write in the number.
Answer:
The wavelength of the wave is 1 m
Explanation:
Given;
mass of the string, m = 20 g = 0.02 kg
length of the string, L = 3.2 m
tension on the string, T = 2.5 N
the frequency of the wave, f = 20 Hz
The velocity of the wave is given by;
[tex]v = \sqrt\frac{T}{\mu} {}[/tex]
where;
μ is mass per unit length = 0.02 kg / 3.2 m
μ = 6.25 x 10⁻³ kg/m
[tex]v = \sqrt{\frac{T}{\mu} } \\\\v = \sqrt{\frac{2.5}{6.25*10^{-3}} } \\\\v = 20 \ m/s[/tex]
The wavelength of the wave is given by;
λ = v / f
λ = (20 m/s )/ (20 Hz)
λ = 1 m
Therefore, the wavelength of the wave is 1 m
How much work must be done to stop a 1150 kg car traveling at 120 km/h?
Answer:
The work to be done is 638,761.12 J
Explanation:
Given;
mass of the car, m = 1150 kg
velocity of the car, v = 120 km/h = 33.33 m/s
Apply work energy theorem;
W = K.E
where;
W is the work done
K.E is the kinetic energy
W = ¹/₂mv²
W = ¹/₂ (1150)(33.33)²
W = 638,761.12 J
Therefore, the work to be done is 638,761.12 J
Aldis is swinging a ball tied to the end of a string over his head. Suddenly, the string breaks and the ball flies away. Arrow best represents the path the ball follows after the string breaks.
Answer:
Straight line in the direction of the tangential velocity the ball had at the moment the string broke
Explanation:
After the string breaks, the ball now disconnected from the centripetal force that was exerted via the string, continues its travel in a straight line in the direction of the tangential velocity it had at the moment the string broke.
Answer:
B
Explanation:
just took the test :)
What are the two main types of star clusters?
Answer:
Open and globular
Explanation:
What is the volume of a marble with a diameter of 3.0
Explanation:
You can solve for volume using radius or diameter.
Sphere Volume = 4/3 • π • r³ = ( π •d³)/6
We're given the diameter so let's use that.
Volume = PI * d^3 / 6
Volume = 3.14159 * 3.0^3 / 6
Volume = 3.14159 * 9 / 2
Volume = 14.137 cubic centimeters
If you go 45 meters at a speed of 16 m/s, how long does the movement take? Exact answer, do NOT round.
Answer:
2 seconds
Explanation:
The time taken for the movement is 2.81 seconds.
To find the time, the given values are,
Distance = 45 meters
speed = 16 m/s.
What is distance?Distance is the total movement of an object without any regard to direction.Distance can be evaluated how much an object moves from starting point to the end point.The distance completely depends upon the speed and time, i,e., the object covering some area with some particular time interval with the particular speed.Distance will be measured in meter, kilometer, etc..Distance is a Scalar quantity.Formula of distance,
Distance = Speed × Time.
As we have to find the time, Formula can be rearranged as,
Time = Distance / Speed
Substituting the given datas in the formula,
Time = 45 / 16
= 2.81 seconds.
So, the time taken for the movement is 2.81 seconds.
Learn more about the distance,
https://brainly.com/question/18416154
#SPJ2
How does deploying slats or slots on an airfoil affect CL max and Stall AOA?
a) Stall AOA increases, CL max increases.
b) Stall AOA decreases, CL max increases.
c) Stall AOA increases, CL max decreases.
d) Stall AOA decreases, CL max decreases.
Answer: a. Stall AOA increases, CL max increases.
Explanation:
Deploying slats or slots on an airfoil affect CL max and Stall AOA by increasing Stall AOA and also increasing CL max.
It should be noted that the coefficient of lift CL would rise through the use of slots due to increase in boundary later energy. The slots also leads to delay of stall by through increase in AOA.
Direction of propagation of light is:________a. in all directions irrespective of polarization b. parallel to the polarization c. perpendicular to the polarization d. not dependent on polarization
Answer:
Perpendicular to the polarization
Explanation:
In this question, we are interested in selecting the option that best complete the question.
The direction of propagation of light is perpendicular to the polarization. Polarized and unpolarized light behave in different manners.
In unpolarized light, the oscillation of the magnetic and electric occurs in all directions to the propagated light.
However, in the case of polarized light, there is a restriction of the electric field oscillation. And thus, it only oscillates in a direction which is perpendicular to the propagation light
65°F to degrees Celsius
Answer:
18.3 C
Explanation:
Answer: 55/3 °C
Explanation:
Formula:
C=5/9(F-32)
Given:
F=65
Solve:
C=5/9(F-32)
C=5/9(65-32)
C=5/9(33)
C=55/3
A brick is lying on a table in a state of static equilibrium. If the mass of the brick is 7.52 kilograms, what is the normal force exerted by the table on the brick? A. -73.7 newtons B. 73.7 newtons C. 80.7 newtons D. 7.52 newtons E. 8.07 newtons
The answer is OPTION B : 73.7 N
Answer:
B
Explanation:
The speed of x-rays is 300 000. m/s. In scientific notation, and with the correct number of significant figures, this speed is… *
Answer:
3.0 x 10 and the exponent on ten is 5.
Explanation:
You are moving the decimal point over to the left 5 times, making the exponent a positive 5 and then you would put a decimal after 3. Making it 3.0 x 10, and the exponent 5.
The speed of x-rays in scientific notation is 3.0 x 10⁶ m/s.
The given parameters;
speed of the x-ray, v = 300,000 m/s
The standard form of the given number represents the scientific notation of the number.
To represent a number in standard form, multiply the number in terms of power or exponent of 10. The value of the exponent represents the number of available zeros present.In scientific notation the speed of the x-ray can be expressed as follows;
300,000 m/s = 3.0 x 10⁶ m/s
Thus, the speed of x-rays in scientific notation is 3.0 x 10⁶ m/s.
Learn more here: https://brainly.com/question/17093969
What is the magnitude of the thrust force before the cart is released?Express your answer in newtons using three significant figures.
Answer:
Hello your question is incomplete below are missing parts
In this video, a small cart that has a mass of 600 grams rests on a table top. There is a fan on top of the cart, blowing air backwards at a steady rate. A stretched spring is attached to the back of the cart by a string, holding it in place. A scale, marked off in newtons, is positioned next to the spring and a small dot at the end of the spring indicates the magnitude of the spring force. The spring and scale together is called a “dynamometer.” Before the cart is released from the spring, the dynamometer reads approximately 1.9 newtons. The video is recorded at 60 frames per second, resulting in playback motion 2 times slower than normal. A frame counter indicates the current frame. A horizontal distance scale, marked off in centimeters, is also shown on the video. While the cart is at rest, the front edge of the front wheel is at the zero of the scale.
At frame 245, the string that attaches the cart to the spring is cut, releasing the cart, and it begins to roll forward. Using the distance scale, the position of the front edge of the front wheel can be tracked with
time. The following table indicates the position at different frames.
Frame Position (cm)
245 0.0
251 1.9
257 6.0
263 13.9
269 24.6
275 38.4
281 55.1
287 75.0
Answer : 1.9 N
Explanation:
The magnitude of the thrust force before the cart is released can be calculated as :
60 fbs = 1 frame = 1/60 secs
therefore 6 frames = 1 / 10 secs
F fam = F spring = 1.9 N
Note: F thrust = F fam = 1.9 N