Answer:
Explanation:
When two waves of similar frequency arrive at the same point and superimpose, they alternately constructively and destructively interfere. This alternating is known as a beat because it produces an unpleasant pulsing sound
Consider two pairs of protons, one pair moving toward each other at a speed of 1000 km/s and the other at a speed of 10 km/s. Which pair of protons will get closer together before they repel each other
The pair of protons with velocity 1000 km/s will get closer together before they repel each other.
To find the correct statement, we need to know about the motion of protons.
What's proton?Proton is a possibility charged subatomic particle.It resides within the nucleus.What's happened when a pair of protons moves towards each other?As a pair of protons are similarly charged, so they will be repelled when they are approach very close.Also, the closeness of approaching depends directly on the kinetic energy of these protons.So, more the velocity of the protons leads to more kinetic energy and more the closeness between them.Thus, we can conclude that the pair of protons with velocity 1000 km/s will get closer together before they repel each other.
Learn more about the motion of protons here:
brainly.com/question/4505452
#SPJ4
Which mechanical component is required in every gas-engine vehicle, but often not needed in an electric vehicle?.
a gearbox bru.
Two students push on a crate to slide it across the floor. One student exerts a force of 5 N to the east, and the second exerts a force of 4 N to the south. What is the magnitude of the net force the students exert on the crate
The magnitude of the net force the students exert on the crate is 6.40 N.
We have to apply the Pythagorean theorem so we have:
F= [tex]\sqrt{5^{2}+4^{2} }[/tex]
=[tex]\sqrt{25+16}\\[/tex]
=[tex]\sqrt{41}[/tex]
Finally, we have:
F = 6.40 N
In mathematics, the Pythagorean theorem, or Pythagoras' theorem, is an essential relation in Euclidean geometry some of the three sides of a right triangle. It states that the vicinity of the square whose side is the hypotenuse is equal to the sum of the areas of the squares on the other aspects.
Pythagorean theorem, the geometric theorem that the sum of the squares at the legs of a right triangle is identical to the rectangular at the hypotenuse (the facet opposite the right perspective) or, in familiar algebraic notation, a2 + b2 = c2.
A Pythagorean triple consists of three fantastic integers a, b, and c, such that a2 + b2 = c2. this sort of triple is normally written (a, b, c), and an instance is (3, four, 5). If (a, b, c) is a Pythagorean triple, then so is (ka, kb, kc) for any wonderful integer.
Learn more about the Pythagorean theorem here https://brainly.com/question/343682
#SPJ4
SOMEONE PLEASE HELP
A sealed pot is allowed to cool off. This is an example of
1)increasing energy of an open system.
2)decreasing energy of an open system.
3)increasing energy of a closed system.
4)decreasing energy of a closed system.
Answer:
4 decreasing energy of a closed system
Based on the chemical equation, use the drop-down menu to choose the coefficients that will balance the chemical
equation:
(Na₂HPO4-Na4P₂07
+ H₂0
The coefficients in order are 2, 1, 1
What is balanced chemical equation?A balanced equation is an equation for a chemical reaction in which the number of atoms for each element in the reaction and the total charge is the same for both the reactants and the products.
In other words, the mass and the charge are balanced on both sides of the reaction.
According to the given situation,
To balance the the chemical equation,
Step 1 - Add a 2 on the Na2HPO4:
2(Na₂HPO₄) ⇒ Na4P₂O₇ + H₂O
Step 2 -Next take count of each element on both sides to see if the 2 is balanced or not:
On the left there are 4 Na, 2 H, 2 P, and 8 O
On the right there are 4 Na, 2 H, 2 P, and 8 O
Step 3 - Now we will divide by 2
i.e. 2 NA.H. P
The coefficient of Na is 2 , Coefficient of H is 1 and Coefficient of P is 1
Therefore,
The coefficients in order are 2, 1, 1.
Learn more about balanced chemical equation here:
https://brainly.com/question/15052184
#SPJ1
An object is placed 10 cm from a convex lens of focal length 20 cm. What is the lateral magnification of the object?.
Answer:Solution
verified
Verified by Toppr
Given:u=−10cm f=20cm (convex lens)
To find: v and image's nature.
Solution: From lens formula
v
1
−
u
1
=
f
1
v
1
+
10
1
=
20
1
Explanation:
What is an application of a magnetic effect of an electric current?
And how does the application work due to the magnetic effect of an electric current?
Applications of Magnetic Effect of ELectric Current:
Electrical appliances such as the electric doorbell, electric fan, electric engines work on the principle of electromagnets. They are used in lifting weighty iron gears and iron scrap.
What is magnetic effect of electric current short answer?Magnetic field exercises a force on a current carrying conductor. The force exerted on the current carrying conductor depends upon the demand of current and movement of magnetic field acting on it.
What is an example of magnetic effect?Examples of magnetic force is a compass, a motor, the interests that hold stuff on the refrigerator, train tracks, and new roller coasters. All moving costs give rise to a magnetic field and the charges that move through its regions, share a force.
To learn more about Magnetic field, refer
https://brainly.com/question/14411049
#SPJ9
A driver in a 2,000 kg SUV moving at 15 m/s crashes into a stopped car, causing it to be propelled forward and the truck to be slowed to 10 m/s. What is the work done on the SUV by the stopped car
The work done on the SUV by the stopped car is .
Given:- A driver in a 2,000 kg SUV moving at 15 m/s crashes into a stopped car and the truck to be slowed to 10 m/s.
To Find:- We have to find the work done on the SUV by the stopped car.
By using the concept of speed it will be solved.
According to the problem,
The work done on the SUV by the stopped car is .
#SPJ4
which type of rock can only form below earths surface?
Answer: Igneous it forms because of magma but magma is under the earths surface so its Igneous
Explanation:
Answer:
its metamorphic.
Explanation:
Projectile effects are a hazard in __________________. magnetic resonance imaging (MRI) fields pediatric units emesis stations operating theaters
Projectile effects are a hazard in MRI fields.
What is MRI field?MRI stands for - Magnetic resonance imaging and it is a medical imaging technique that uses a magnetic field and radio waves to create detailed images of the organs and tissues in your body.
Projectile effects are a hazard in MRI fields, due to attraction exerted by the static magnetic field of the MRI scanner on ferromagnetic objects accidentally introduced into the MRI-scanner room.
Thus, Projectile effects are a hazard in MRI fields.
Learn more about MRI fields here: https://brainly.com/question/23730902
#SPJ1
An asteroid on the earth's orbit experiences a free-fall acceleration which is 8.0 times smaller than it would be on the earth. what is the distance between the asteroid and the earth's surface measured in the earth's radii? neglect the gravity of the moon.
The the distance between the asteroid and the earth's surface measured in the earth's radius is 1.82 R
What are the Asteroids:
Asteroids are small, rocky objects that orbit the Sun. They are much smaller than planets.They are found between the orbits of Mars and Jupiter, though some have more eccentric orbits.here,
An asteroid experiences acceleration on earth's orbit which is 8.0 times smaller than it on the earth surface.
Free fall acceleration of Asteroid:
on earth's surface = gon earth's orbit = g' = g / 8so,
g' = GM /(R + x)^2 ------1
g = GM / R^2
g' = 1/8 ( GM / R^2 ) -------1
where G is gravitational constant
M is mass of earth
R is earth's radius
comparing both equations 1 and 2
GM /(R + x)^2 = 1/8 ( GM / R^2 )
8 R^2 = (R + x)^2
2√2 * R = R + x
x = R (2√2 - 1)
x = 1.82*R
hence, The the distance between the asteroid and the earth's surface measured in the earth's radius is 1.82*R
Learn more about earth's radius here:
https://brainly.com/question/4865936
#SPJ4
Establishing a high critical value when calculating the results of a statistical test means that a researcher will have more confidence in finding significance than when a lower critical value is established. Please select the best answer from the choices provided T F
The statement 'establishing a high critical value in a statistical test is associated with more confidence' is TRUE.
What is statistical significance?The statistical significance is a arbitrary value used to indicate that data collected can be used to confirm (or reject) my working hypothesis.
The most widely used value to measure the statistical significance is the p threshold.
In conclusion, the statement 'Establishing a high critical value when calculating the results of a statistical test means that a researcher will have more confidence in finding significance than when a lower critical value is established' is TRUE.
Learn more about statistical significance here:
https://brainly.com/question/15848236
#SPJ1
Answer:
The answer is F or false
Explanation:
correct edge 2023
A baseball rolls along a flat parking lot in a straight line at a constant speed of 3.8 m/s. How
far will the baseball roll in 15s?
This is a uniform rectilinear motion (MRU) exercise.
To start solving this exercise, we obtain the following data:
DATA:V = 3.8 m/sD = ¿?T = 15 secTo calculate the distance, multiply the speed by the time.
We apply the following formula: d = v * t
We clear our data in the formula:
[tex]\bf{d=3.8\dfrac{m}{\not{s}}*15 \not{s} }[/tex]
[tex]\bf{d=57 \ m}[/tex]
The baseball in 15 seconds will roll a distance of 57 meters.
{ Pisces04 }
What are the 2 forces acting on a projectile?
A. Gravity and Tension
B. Air Resistance and Tension
C. Gravity and Air Resistance
D. Gravity and Normal Force
Answer:
Gravity and Air resistance.
Explanation:
A projectile is an object that is launched into the air by the application of an external force and they are able to move freely under the influence of gravity and air resistance.
Therefore,
The 2 forces acting on a projectile are:
Gravity and Air resistance.
For a simple compressible system, the change in the total energy of a system during a process is affected by ______. Multiple choice question. changes in potential and kinetic energies only change in potential energy only change in kinetic energy only changes in potential, kinetic, and internal energies change in internal energy only
For a simple compressible system, the change in the total energy of a system during a process is affected by changes in potential, kinetic, and internal energies.
First law of thermodynamics:The conservation of energy principle sometimes referred to as the first law of thermodynamics, offers a reliable framework for researching the connections between the many types of energy and their interactions. The first law of thermodynamics asserts that energy can only change forms during a process; it cannot be created or destroyed, according to experimental data. As a result, during a procedure, every piece of energy should be taken into account.
The evaluation of the system's energy at the start and end of the process, as well as the difference between them, is necessary to calculate the energy change of a system during a process. That is,
Energy change = Energy at final state - Energy at the initial state
Δ[tex]E_{system}[/tex] = [tex]E_{2} - E_{1}[/tex]
Learn more about thermodynamics here:
https://brainly.com/question/13059309
#SPJ4
Horizontal angulation is: Group of answer choices the side-to-side angulation. different when using the paralleling and bisecting techniques. correct when the central ray is parallel to the curvature of the arch. determined by the Stabe bite-block.
Option A is correct as horizontal angulation is the side- to -side angulation.
When the dental X-ray tube head is positioned and the center ray is pointed in a horizontal, or side-to-side, plane, this is referred to as horizontal angulation.
It remains the same when using the paralleling and bisecting techniques.
The central ray should not be directed parallel to the curvature of the arch.
Instead, it is pointed perpendicular to the curve of the tooth arch and film to prevent errors in x-ray interpretation.
A radiograph with "open" contacts is the result of proper horizontal angulation.
A radiograph with "overlapped" contacts results from incorrect horizontal angulation.
Hence, option A is correct
Learn more about X-rays here https://brainly.com/question/944124
#SPJ4
Two infinite sheets of current flow parallel to the y-z plane. The left-hand sheet, which intersects the x-axis at x = 0, consists of an infinite array of wires parallel to the z-axis with a density n = 910 wires/m and a current per wire of IL = 0.17 A in the +z direction. The right-hand sheet, which intersects the x-axis at x = a = 12 cm, is identical to the left-hand sheet, except that it has a current per wire of IR = 0.17 A in the -z direction.
a) Calculate the y-components of the net magnetic field in the following places: x1 = -15 cm, x2 = 6 cm, and x3 = 24 cm. (The x- and z-components of the B-field are zero.)
B(x1)y = T
B(x2)y = T
B(x3)y = T
b) Suppose the above configuration of currents is unchanged except that the direction of the current IR is reversed so that now IR also flows in the +z direction. (The magnitude remains the same.) Calculate the y-components of the net magnetic field at the same positions as in part a).
B(x1)y = T
B(x2)y = T
B(x3)y = T
c) Return to the configuration of part a). Suppose you want to have the region 0 < x < a able to confine electrons (qe- = -1.60 x 10-19 C, me- = 9.11 x 10-31 kg) that have been accelerated from rest through a 66 V electrostatic potential. If the electrons are to be stacked in circular orbits parallel to the x-z plane with centers on the plane x = a/2, what is the minimum current per wire required if IL and IR are equal in magnitude but opposite in direction?
IL = A
Two infinite sheets of current flow parallel to the y-z plane. The left-hand sheet, which intersects the x-axis at x = 0, consists of an infinite array of wires parallel to the z-axis with a density of n = 910 wires/m and current per wire of IL = 0.14 A in the +zdirection.
The right-hand sheet, which intersects the x-axis at x = a = 12 cm, is identical to the left-hand sheet, except that it has a current per wire of IR = 0.14 A in the -z-direction.
(a) Calculate the y-components of the net magnetic field in the following places:
x1 = -15 cm, x2 =6 cm, and x3 = 24 cm. (The x- and z-components of the B-field are zero.)
B(x1)y = T
B(x2)y = T
B(x3)y = T
Please check the attached file for a detailed answer.
Learn more about two infinite sheets at
https://brainly.com/question/15712218
#SPJ4
Binding of a signaling molecule to which type of receptor leads directly to a change in the distribution of substances on opposite sides of the membrane?.
When two sides of a membrane are in contact with each other, the distribution of ions will alter as a result of the binding of a signal molecule to a ligand-gated ion channel.
What is a ligand-gated ion channel?
Ligand-gated ion channels (LGICs) are membrane proteins that are structurally integral and feature a pore that permits the controlled passage of particular ions across the plasma membrane. The electrochemical gradient for the permeant ions drives the passive ion flux.
When a chemical ligand, such as a neurotransmitter, attaches to the protein, ligand-gated ion channels open. Changes in membrane potential cause voltage channels to open and close. When a receptor physically deforms, as in the case of pressure and touch receptors, mechanically-gated channels open.
Learn more about ligand-gated ion channel here:
https://brainly.com/question/15215628
#SPJ4
A 5.0-kg object is moving with speed 2.0 m/s. A 1.25-kg object is moving with speed 4.0 m/s Both objects encounter the same constant braking force, and are brought to rest. Which object travels the greater distance before stopping
Acceleration is constant, so we can use the following kinematic equation and Newton's second law.
[tex]{v_f}^2 - {v_i}^2 = 2a\Delta x \implies -{v_i}^2 = -2\dfrac{F}{m}\Delta x \implies {v_i}^2 = 2\dfrac{F}{m} \Delta x[/tex]
where [tex]v_i[/tex] and [tex]v_f[/tex] are initial/final velocities, [tex]a[/tex] is acceleration, [tex]\Delta x[/tex] is displacment, [tex]F[/tex] is force, and [tex]m[/tex] is mass. Since the objects are coming to rest, the acceleration opposes the direction of motion and is negative.
Solve for [tex]\Delta x[/tex].
[tex]\Delta x = -\dfrac{m {v_i}^2}{2F}[/tex]
Compute the displacements of both objects.
[tex]\Delta x_{5.0\text{-kg}} = -\dfrac{(5.0\,\mathrm{kg}) \left(2.0\frac{\rm m}{\rm s}\right)^2}{2F} = -\dfrac{10}F \dfrac{\rm m}{\rm N}[/tex]
[tex]\Delta x_{1.25\text{-kg}} = -\dfrac{(1.25\,\mathrm{kg}) \left(4.0\frac{\rm m}{\rm s}\right)^2}{2F} = -\dfrac{10}F \dfrac{\rm m}{\rm N}[/tex]
Then both objects are displaced by the same amount.
Answer:
They stop in the same distance
Explanation:
f friction is the same for both and must overcome the KE of each object to bring each to rest.
f friction * d = 1/2 mv^2 for each object :
f * d1 = 1/2 m1 v1^2 f * d2 = 1/2 m2 v2^2
= 1/2 5 (2 )^2 = 1/2 1.25 (4)^2
Object 1 KE = 10 j Object 2 KE = 10 j
f d1 / f d2 = 10 / 10 ( f is the same for both)
d1 / d2 = 1 so d1 = d2 they stop in the same distance !
An automated machine passes milk through steam at a temperature of 138OC for two seconds and then cools it rapidly. This is an example of ____________________.
Option (c) is correct
This is an example of Ultra-high-temperature pasteurization(UHT).
For ultra-high-temperature (UHT) pasteurization, milk or cream must be heated for one or two seconds to 138–150 °C (280–302 °F).
The most popular application of UHT is in the production of milk, although it is also used in the production of fruit juices, cream, soy milk, yoghurt, wine, soups, honey, and stews.
The normal unrefrigerated shelf life of UHT milk in a sterile container is six to nine months.
UHT milk is aseptically packaged to provide a shelf-stable good. A sterile product is put within a sterile package using aseptic packaging and such processing needs to happen in a sterile setting.
Both pasteurization and sterilization help in the destruction of microbes and enzymes by heating but pasteurization only kills the vegetative stage of the bacteria, which is where the spores survive, whereas sterilization kills all microorganisms and their spores.
Therefore, an automated machine passes milk through steam at a temperature of 138°C for two seconds and then cools it rapidly is an example of Ultra-high-temperature pasteurization.
Learn more about Pasteurization here https://brainly.com/question/635342
#SPJ4
The pilot of the fighter jet turns by banking the wings such that the lift of the wings has a component in
the direction of the centre of the turn. The pilot wishes to turn the jet in a tight radius of 960.0 m while
maintaining a constant circular speed of 1440 km/h. Determine the angle of bank needed, measured from
the vertical.
The angle of bank needed, measured from the vertical is 86.6⁰.
Banking angle of the circular path
The angle of bank needed, measured from the vertical is calculated as follows;
v = √(rg tanθ)
where;
v is the speed = 1440 km/h = 400 m/sr is radius of the curve = 960 mg is acceleration due to gravityθ is the banking angle400² = (960 x 9.8 x tanθ)
tanθ = 400²(960 x 9.8)
tanθ = 17
θ = arc tan(17)
θ = 86.6⁰
Thus, the angle of bank needed, measured from the vertical is 86.6⁰.
Learn more about banking angle here: https://brainly.com/question/8169892
#SPJ1
A heat pump used to heat a house runs about one-third of the time. The house is losing heat at an average rate of 22,000 kJ/h. If the COP of the heat pump is 2.8, determine the power the heat pump draws when running.
The power that heat pump draws when running will be 6.55 kj/kg
A heat pump is a device that uses the refrigeration cycle to transfer thermal energy from the outside to heat a building (or a portion of a structure).
Given a heat pump used to heat a house runs about one-third of the time. The house is losing heat at an average rate of 22,000 kJ/h and if the COP of the heat pump is 2.8
We have to determine the power the heat pump draws when running.
To solve this question we have to assume that the heat pump is at steady state
Let,
Q₁ = 22000 kj/kg
COP = 2.8
Since heat pump used to heat a house runs about one-third of the time.
So,
Q₁ = 3(22000) = 66000 kj/kg
We known the formula for cop of heat pump which is as follow:
COP = Q₁/ω
2.8 = 66000 / ω
ω = 66000 / 2.8
ω = 6.66 kj/kg
Hence the power that heat pump draws when running will be 6.55 kj/kg
Learn more about heat pump here :
https://brainly.com/question/1042914
#SPJ4
true or false Immediately after the switch is closed, there is no current flowing through the resistor.
True. Immediately after the switch is closed, current only flows through the capacitor and not through the resistor. This is because the resistor offers resistance to the current flow while the capacitor acts as a short in the circuit.
What is a RC circuit?
Consider the circuit diagram shown below. This circuit is known as an RC circuit. In an RC circuit:
The capacitor C is connected in parallel with resistor R and potential V.When the switch is kept open, i.e. no potential is applied to the circuit for an extended period of time, the charge stored in the capacitor dissipates.This leads to the current to stop flowing thorough the other components of the circuit.Thus, when potential is applied across the capacitor (uncharged), the capacitor initially behaves as a closed wire and offers no resistance as the current flows through it whilst charging it.Once the capacitor has been charged for a long period of time, it acts as a break in the circuit wherein no current can flow through it.Now, when a switch is placed in the circuit, after the switch has been kept open for a long time, closing it causes the relative current and potential in the circuit to depend upon the state of charge in the capacitor at that instant.Supposing that the capacitor has been kept uncharged for a long period of time, at this instant when the switch is closed, only the current flows through the capacitor and not through the resistor.
This is because the resistor offers resistance to current flow while the capacitor acts as a short in the circuit.
Learn more about RC circuits here:
https://brainly.com/question/8569907
#SPJ4
Calculate the magnitude of the electric field inside the solid at a distance of 9.40 cmcm from the center of the cavity.
The magnitude of electric field inside the solid at a distance of 9.50cm from the center of the cavity is 6.5 x 10⁵ N/C.
Volume of shell of chargeV = ⁴/₃π(R³ - r³)
V = ⁴/₃π (0.092³ - 0.0655³)
V = 2.085 x 10⁻³ m³
Total charge of the surfaceQ = Vσ
where;
V is volumeσ is charge densityQ = 2.085 x 10⁻³ m³ x 7.35 x 10⁻⁴ C/m³
Q = 1.53 x 10⁻⁶ C
Electric field due to the shellE = kQ/R²
E₁ = (9 x 10⁹ x 1.53 x 10⁻⁶)/(0.092)²
E₁ = 1.627 x 10⁶ N/C
Electric field due to the charge qE₂ = (9 x 10⁹ x 2.14 x 10⁻⁶)/(0.092)²
E₂ = 2.276 x 10⁶ N/C
Electric field inside the solid at a distance of 9.50cm from the center of the cavity;
E = E₂ - E₁
E = 2.276 x 10⁶ N/C - 1.627 x 10⁶ N/C
E = 6.5 x 10⁵ N/C
Thus, the magnitude of electric field inside the solid at a distance of 9.50cm from the center of the cavity is 6.5 x 10⁵ N/C.
Complete question:
A point charge of -2.14uC is located in the center of a spherical cavity of radius 6.55cm inside an insulating spherical charged solid. The charge density in the solid is 7.35×10−4 C/m^3.
a) Calculate the magnitude of the electric field inside the solid at a distance of 9.20cm from the center of the cavity.
Learn more about electric field here: https://brainly.com/question/14372859
#SPJ1
Moving a charge from point A, where the potential is 400 V, to point B, where the potential is 120 V, takes 4.3×10−4 J of work
What is the value of the charge?
Express your answer with the appropriate units.
The charge is obtained as 1.5 * 10^-5 C.
What is potential?The electric potential is the work done in moving a unit charge from one point to another.
Now we have;
W = -QdV
W = Work done in joules
Q = charge
dV = voltage change
Hence;
4.3×10−4 =- Q( 120 - 400)
Q = 4.3×10−4/280
Q = 1.5 * 10^-5 C
Learn more about electric potential:https://brainly.com/question/17058027
#SPJ1
You have just checked out a Lime bicycle, only to find that one of its tires is flat. Luckily, you have a bicycle pump with you. As you refill the flat tire, you find that it takes a considerable amount of effort to do it. Why
It will take a considerable amount of effort to pump the flat tire because of the bicycle pump has smaller area and it will require more force to push air into the flat tire.
Difference in air pressurePressure is defined as force applied per unit area of the given surface.
Pressure = Force/Area
The pressure of air inside the bicycle pump is smaller compared to the air pressure inside the tire.
Thus, it will take a considerable amount of effort to pump the flat tire because of the bicycle pump has smaller area and it will require more force to push air into the flat tire.
Learn more about air pressure here: https://brainly.com/question/2353923
#SPJ1
An object travels around a circle of radius 4.00 m with a velocity of 2.00m/s. What is its angular velocity? (Please keep your answer with two decimal place and no units)
Angular velocity of the object is 0.5 radian/second.
To find the answer, we need to know about the angular velocity.
What's the mathematical expression of angular velocity?The angular velocity= velocity/ radius
What will be the angular velocity, if an object moves in a circular path of radius 4m and velocity 2 m/s?The angular velocity of the object is 2/4 = 0.5 radian/second.
Thus, we can conclude that the angular velocity is 0.5 radian/second.
Learn more about the angular velocity here:
brainly.com/question/1452612
#SPJ4
8 The diagram shows four identical spheres placed between two wooden blocks on a ruler.
4
A
sphere
bo
0 5
What is the diameter of one sphere?
1.0 cm
B 2.0 cm
₂
10
16
C 3.0cm
wooden block
15 cm
D 4.0cm
9
A length of cotton thread is measured between two points on a ruler as
shown in the figure below
When the length of the thread was wound closely around a pen, it goes round
six times as shown in the second figure below.
The diameter of the sphere is 2cm.
How to calculate the diameter?From the diagram, the first sphere on the ruler is at 4cn and the last sphere is at 12cm.
Therefore, the length will be:
= 12 - 4.
= 8cm
The diameter of one sphere will be:
= Length / 4
= 8/4
= 2
Therefore, the diameter of the sphere is 2cm.
Note that the second question wasn't found online.
Learn more about diameter on:
brainly.com/question/358744
#SPJ1
While in Earth's orbit, an 80-kg astronaut carrying a 20-kg tool kit is initially drifting toward a stationary space shuttle at a speed of 2 m/s. If she throws the tool kit toward the shuttle with a speed of 6 m/s, her final speed is what value
The answer is 1 m/s toward the shuttle.
In physics, conservation means that the initial and final values are equivalent. This implies that a system's total starting and total final momentums will be identical in terms of momentum. The force acting on an item will always be equal to the change in the object's momentum over time, according to Newton's second law.
Therefore, initial momentum = final momentum
Pi = Pf
100*2 = 20*6+80*v
200 = 120+80*v
200-120 = 80*v
80 = 80*v
1 = v
v = 1 m/s
https://brainly.com/subject/physics
#SPJ4
An 80-kg hiker climbs to the top of a tall hill and builds up 470,000 j of gravitational potential energy. how high did the hiker climb? round the answer to the nearest hundred. meters
Answer: An 80 kg hiker climbs to the top of a tall hill and builds up 470000J of gravitational potential energy. With this energy, he can climb up to 600m of Hight.
Explanation: To find the answer, we need to know about the Gravitational potential energy.
What is the gravitational potential energy?Gravitational potential energy can be defined as, the potential energy associated with a gravitational field.It has an expression,[tex]U=mgh[/tex]
where,U is the gravitational potential energy, m is the mass of the body, g is the acceleration due to gravity and h is the height.
How to solve the problem?As we know that the expression of height from the expression of gravitational potential energy as,[tex]h=U/mg[/tex]
We have, [tex]m=80kg[/tex] , [tex]U=470000J[/tex] and [tex]g=9.8 m/s^{2}[/tex] .Substituting these into the equation, we get, height as,[tex]h=470000/(80*9.8)=599.98=600 m[/tex]
Thus, from the above calculation, we can conclude that, he can climb up to 600m of Hight.
Learn more about the Gravitational potential energy here:
https://brainly.com/question/28020732
#SPJ4
Answer: 600 m
Explanation: Got correct on Edge