Answer:
This air being forced out causing the air pressure inside to be much lower than that on the outside. As higher air pressure always pushes, it keeps the two plungers together.
Hope that helps. x
Your father bought you a pair of shoes. When you wore the shoes you realized there was a problem. The shoes were too long. Why might such prblm arise and how can it be mitigated?
Please answer it soon as possible
Answer: This problem may arise when your father never bought a shoe before. A male is bad at buying accesories and guessing the size, so the mother should have bought a pair of shoes. Or it can also be that your father has a short term memory or that he never knew the size of your feets. The feet might also have irregular growth for which it grows more than the normal size but such cases are rare to be seen.
You can prevent this by going with your father and selecting the shoe of your size. Or you can simply send your mother to buy it for you instead. Or another perfect choice could be is that you just dont ever send your father to buy anything for you or just never buy a pair of shoes. Wear the shoes that you always did or buy it yourself since your the one who is supposed to know the size of your feets. Another possible solution could be that you can make use of the money by gifitng them to someone close to you.
Name a device or gadget that converts
a) Heat energy to mechanical energy b) heat energy to light energy
c)electrical energy to sound energy
Answer:
a heat engine converts heat to mechanical energy.
electric generator
What does it mean when a wave’s amplitude increases?
The wave’s wavelength gets longer.
The wave is moving through a denser medium.
The wave is carrying more energy.
The wave’s frequency also increases.
Answer:
the wave is carrying more energy
Explanation:
trust me broski
Answer:
a
Explanation:
In an inelastic collision:
I. only momentum is conserved
II. only kinetic energy is conserved
III. momentum and kinetic energy are both conserved.
IV. neither momentum nor kinetic energy are conserved.
Hi there!
I. Only momentum is conserved.
An inelastic collision means that there is a LOSS in the KINETIC ENERGY of the system.
However, momentum is ALWAYS conserved for every type of collision unless there is an external force acting on the system.
A tennis ball is dropped from a height of 3 m and bounces back to a height of
1 m after hitting the ground (s = 0).
Use the equation V^2=U^2 + 2as to calculate the velocity of the tennis
ball when it hits the ground.
The velocity of the tennis ball when it hits the ground is calculated as 4.43m/s. Details about velocity can be found below.
How to calculate velocity?The velocity of a moving object can be calculated using the equation of motion as follows:
v² = u² + 2as
Where;
v = final velocityu = initial velocitya = accelerations = distancev² = 0² + 2(9.8) (1)
v² = 19.6
v = ✓19.6
v = 4.43m/s
Therefore, the velocity of the tennis ball when it hits the ground is calculated as 4.43m/s.
Learn more about velocity at: https://brainly.com/question/18084516
#SPJ1
what happens to the state of motion of the object, when you don't exert a force on it???
Answer: It eventually loses its stamina, and would come to a stop.
Explanation:
A certain satellite is in circular orbit about the earth at an altitude of 550km. If the satellite makes a revolution in 110minutes, calculate its orbital speed
Answer:
Approximately [tex]6.59\times 10^{3}\; \rm m\cdot s^{-1}[/tex].
Explanation:
Look up the radius of the earth: approximately [tex]6.371 \times 10^{3}\; \rm km[/tex].
The radius of the orbit of this satellite is the of the radius of the earth (at ground level) plus the height of the satellite relative to ground level:
[tex]\begin{aligned}r &\approx 6.371 \times 10^{3}\; {\rm km} + 550\; {\rm km} \\ &= 6.921 \times 10^{3}\; \rm km\end{aligned}[/tex].
Convert the units of both distance and time to standard units:
Orbital radius:
[tex]\begin{aligned}r &\approx 6.921 \times 10^{3}\; {\rm km} \\ &= 6.921 \times 10^{3}\; {\rm km} \times \frac{10^{3}\; \rm m}{1\; \rm km} \\ &= 6.921 \times 10^{6}\; \rm m\end{aligned}[/tex].
Orbital period:
[tex]\begin{aligned}t &= 110\; \text{minute} \\ &= 110\; \text{minute} \times \frac{60\; \text{second}}{1\; \text{minute}} \\ &= 6.6 \times 10^{3}\; \text{second}\end{aligned}[/tex].
Calculate the circumference of this orbit:
[tex]\begin{aligned}& 2\, \pi\, r \\ \approx\; & 2 \, \pi \times 6.921 \times 10^{6}\; {\rm m} \\ \approx\; & 4.35 \times 10^{7}\; \rm m\end{aligned}[/tex].
Calculate the orbital speed (tangential) of this satellite:
[tex]\begin{aligned}v &= \frac{2\, \pi\, r}{t} \\ &\approx \frac{4.35 \times 10^{7}\; \rm m}{6.6 \times 10^{3}\; \rm s} \\ &\approx 6.6 \times 10^{3}\; \rm m \cdot s^{-1}\end{aligned}[/tex].
What type of heat does not require matter?
Radiation is the only method of heat transfer that does not require matter.
Facts about Radiation :
The energy from the sun is received in the form of radiation. It travels in the form of waves. It can be absorbed by substances in its path.Heat Radiation travels through air. Black surfaces are the emitters of heat radiation.Shiny surfaces are the reflectors of heat radiation.Heat transfer by Radiation doesn't require any medium.An object with a mass of 13.2 kg is accelerating at 9.4 m/s? What force is being applied on the object?
Round your answer to the appropriate number of significant figures and use the following formula:
force = mass x acceleration
Force = mass x acceleration:
Force = 13.2 kg x 9.4 m/s
Force = 124.08
Force = 124 Newtons
The force will be = 124 N
What is newton's second law of motion?
Newton's second law is a quantitative description of the changes that a force can produce on the motion of a body. It states that the time rate of change of the momentum of a body is equal in both magnitude and direction to the force imposed on it.
according to newton's second law of motion
Force = mass * acceleration
given
mass = 13.2 kg
acceleration = 9.4 m/s
force = 13.2 * 9.4
= 124.08 N
Rounding off answer to the appropriate number of significant figures
force = 124 N
learn more about newton's second law :
https://brainly.com/question/13447525?referrer=searchResults
#SPJ2
PLEASE HELP LIKE AN ACUALL ANSWER NOT SPAM NO ONE IS GUNNA CLICK THE LINK
Answer:
C. 9.8
Explanation:
Which statement describes the magnetic field inside a bar magnet? It points from north to south. It points from south to north. It forms loops inside the magnet. There is no field within the magnet.
Inside the bar magnet, the magnetic field points from north to south. Statement A is correct.
Magnetic Field:
It is defined as a vector field or the influence of the magnet on the electric current, charges and ferromagnetic substance.
The strength of magnetic field is depends up on the numbers of magnetic field lines per unit area.
Magnetic field lines emerge from the North pole and end in the South pole of a bar magnet. Inside the magnet are also present inside the bar magnet and never intersect at any point.Therefore, inside the bar magnet, the magnetic field points from north to south.
To know more about Magnetic Field:
https://brainly.com/question/19542022
Answer:b
Explanation:
The position as a function of time for two objects moving along a straight line is shown in the graph,
Which statement is true about the distances the two object have traveled at time ty?
Object 1 has traveled a greater distance.
B
Object 2 has traveled a greater distance.
Both objects have traveled the same distance
D
The total distance traveled by each object cannot be compared using the graph.
The distance traveled by object 1 is greater than the distance traveled by object 2.
The shortest distance between two points is a straight line. More distance is covered when the path of motion is curved.
The distance traveled by each object at different time is compared as follows;
[tex]at \ t_ A , \ \ \ d_1>d_2 \ \ \ (d_2 = 0)\\\\at \ t_B, \ \ d_1 > d_2 \\\\at \ t_C, \ \ \ d_2 > d_1 \\\\at \ t_D \ \ \ d_1 = d_2\\\\at \ t_f \ \ \ d_2 > d_1 \ \ \ (d_1 = 0)[/tex]
The major distinguishing distance traveled by each occurs at [tex]t_B[/tex] and [tex]t_C[/tex].
[tex]d_{(t_B)} > d_{(t_C)} \\\\d_1 > d_2[/tex]
Thus, we can conclude that the distance traveled by object 1 is greater than the distance traveled by object 2.
Learn more about distance of object on straight and curved path here: https://brainly.com/question/7447601
A number line goes from negative 5 to positive 5. Point D is at negative 4 and point E is at positive 5. A line is drawn from point D to point E. What is the location of point F, which partitions the directed line segment from D to E into a 5:6 ratio? Negative one-eleventh One-eleventh Two-fifteenths Fifteen-halves.
The location of the point F that partitions a line segment from D to E ([tex]\overline{DE}[/tex]), that goes from negative 4 to positive 5, into a 5:6 ratio is fifteen halves (option 4).
We need to calculate the segment of the line DE to find the location of point F.
Since point D is located at negative -4 and point E is at positive 5, we have:
[tex] \overline{DE} = E - D = 5 - (-4) = 9 [/tex]
Hence, the segment of the line DE ([tex]\overline{DE}[/tex]) is 9.
Knowing that point F partitions the line segment from D to E ([tex]\overline{DE}[/tex]) into a 5:6 ratio, its location would be:
[tex] F = \frac{5}{6}\overline{DE} = \frac{5}{6}9 = 5*\frac{3}{2} = \frac{15}{2} [/tex]
Therefore, the location of point F is fifteen halves (option 4).
Learn more about segments here:
https://brainly.com/question/24472171?referrer=searchResultshttps://brainly.com/question/13270900?referrer=searchResults
I hope it helps you!
Answer:
The above answer is actually incorrect - the real answer is B. 1/11
Explanation:
I'm adding a ss below for proof
Hope this helped!
I'd really appreciate Brainliest :)
A diffraction grating is 1.50 cm wide and contains 2000 lines. When used with light of a certain wavelength, a third-order maximum is formed at an angle of 20.0°. What is the wavelength (in nm)?
Answer:
because of the gravity of the earth
which is the following is a modern method used to pressure food
1. sprey drying
2.salting
3. smoking
4. Honey
Answer:
1. Spray Drying
Explanation:
it is the most modern
when a rigid body rotates about a fixed axis, all the points in the body have the same
Hi there!
[tex]\large\boxed{\text{Angular acceleration.}}[/tex]
For a rigid body rotating about a fixed axis, its angular characteristics ⇒ angular acceleration and velocity are constant throughout.
However, its LINEAR velocities/accelerations differ because of the following relationships:
v = ωr
a = αr
Thus, a point closer to the axis of rotation has a smaller linear velocity or acceleration compared to a point along the edge.
Can someone please help me with number 10
Answer:
A
Explanation:
increase
Answer:
B???
Explanation:
The rate of it going up is lower than L
It might be D too.
PLEASE HELP MEEEEE 80 points on the line and i need this done
Answer:
5) A 200n
F net=0n
6) B 50n
F net=0n
7) C 200n
F net= 900n, up
8) D 80n
F net=60n,left
9) E 300n
F net=60n,left
10)???
11) G 20n
F net=30n,Right
__________________________________
All the answers is hard
correct me if i'm wrong
40 POINTSS. Now explore friction force. Set the piece of plastic or wood on the table and push it steadily across the tabletop using your fingertip. Note how much opposition to your push you feel. Repeat the steps, but this time push the piece of plastic or wood across a rug, carpet, or piece of fabric. If you’re using fabric, be sure to secure the fabric so it doesn’t move. How does the opposition to motion on the tabletop compare with that of the rug, carpet, or fabric? WILL MARK BRAINLIST IF RIGHT
Answer: If there is a higher friction, the opposition force is higher so that it can reduce our speed. So, a factor that affects friction is the roughness or smoothness of the surface of the object. In comparison of the table with the fabric, the fabric will have a more opposition force. As the surface of the fabric is usually rougher than the surface of a smooth table. As there is more friction on a fabric, we will feel more opposition force on our finger tip.
How fast would a(n) 75 kg man need to run in order to have the same kinetic energy as an 8.0 g bullet fired at 420 m/s ?
[tex] = \frac{1}{2} \times 0.008 \times 420J \\ = 1.68J[/tex]
So, the kinetic energy of the bullet is 1.68 J. It is said that the man's kinetic energy should be same as that of the bullet.Mass of the man (m2) = 75 KgLet the velocity of the man be v2.Therefore,[tex]1.68J = \frac{1}{2} \times 75 \: kg \times v2 \\ = > v2 = \frac{1.68 \times 2}{75} m {s}^{ - 1} \\ = 0.0448 \: m \: {s}^{ - 1} [/tex]
Answer:
0.0448 m/s
Hope you could get an idea from here.
Doubt clarification - use comment section.
What is the weight of sugar if 5% of sugar from 6g of sugar
if a tent is touched with a finger on inner surface , when it is raining , it allows the rain water to leak through. give a reason for this observation
Explanation:
When water vapor in the air comes into contact with something cool, like the ceiling of a tent, its molecules slow down and get closer together. When that happens, the gaseous water vapor turns back into liquid water droplets. That's condensation!
The momentum of a system is conserved:
I. when no net external force act on the system
II. when no internal forces act on the system
III. always
Answer:
I. when no net external force act on the system
Explanation:
Suppose you are exerting an external force F on an object, it's velocity keeps increasing. Which means its momentum = velocity * mass is also increasing. In this case the initial momentum of that object is not preserved (but increased).
the impulse-momentum relationship is a direct result of
Newton's second law.
__________________
o0o0o0o0o0o0o0o0o0
The impulse-momentum relationship is a direct result of Newton's second law of motion.
What is the impulse-momentum?The impulse-momentum theorem states that the impulse applied to an object is equal to the change in its momentum. It proves that the change in momentum of an object depends not only on the amount of force applied but also on the duration of force applied.
Newton's second law states that the force acting on an object is equal to the rate of change of its momentum.
This means that a force applied to an object will cause a change in its momentum. The impulse-momentum relationship describes the relationship between the force applied to an object and the resulting change in its momentum.
The impulse-momentum relationship states that the impulse acting on an object is equal to the change in its momentum.
Impulse is defined as the force applied to an object over a period of time, while momentum is the product of an object's mass and velocity. Therefore, the impulse-momentum relationship can be expressed as:
Impulse = Change in momentum
This relationship is important in understanding the behavior of objects in motion, particularly in collisions or other situations where forces act over a period of time.
Learn more about impulse-momentum here:
https://brainly.com/question/904448
#SPJ5
Suppose you take a piece of hard wax from an unlit candle. After you roll the wax between your fingers for a while, it becomes soft. What state of matter is the softer wax? Is it possible for the wax to change without changing its state?
Answer:
An amorphous solid does not have a definite melting point; instead, it melts gradually over a range of temperatures, because the bonds do not break all at once. This means an amorphous solid will melt into a soft, malleable state (think candle wax or molten glass) before turning completely into a liquid.
Explanation:
Hope this helps
May I get braineist pls?
A number line goes from 0 to 30. Closed circles are at 6 and 25. A line is drawn from point 6 to point 25. Ari is swimming a 25-meter race. After swimming 6 meters, she catches up to Amanda in a ratio of 7:3 from the 6-meter mark. At what meter mark does Ari catch up to Amanda? Round to the nearest tenth, if necessary. Ari catches up to Amanda at meters.
The position on the meter mark where Ari catches up with Amanda is 19.3 m.
The given parameters:
Range of the number line, = 0 to 30Position of the closed circles, = 6 and 25The ratio between the initial position and final position of Ari = 7:3The distance between 6 m mark and 25 m mark is calculated as follows;
[tex]d = 25 \ m - \ 6 \ m\\\\\d = 19 \ m[/tex]
The distance traveled by Ari before catching up with Amanda is calculated as follows;
total ratio = 7 + 3 = 10
[tex]distance = \frac{7}{10} \times 19 \ m\\\\distance = 13.3 \ m[/tex]
The position of Ari from the 6 m mark is calculated as follows;
[tex]position = 6 \ m \ + \ 13.3 \ m\\\\position = 19.3 \ m[/tex]
Thus, the position on the meter mark where Ari catches up with Amanda is 19.3 m.
Learn more about partition of line segments here: https://brainly.com/question/11764811
Answer:
The above answer is correct! The answer is 19.3 meters :)
Explanation:
adding a ss for proof!
hope this helps :D
A moving coil meter has a resistance of 25 and indicate full scale deflection when a current of 4.0mA flows through it.How could this meter be converted to a millimeter having a full scale deflection for a current of 50 mA?
By adding an external resistor of 287.5 Ω in series with the meter, the conversion of the moving coil meter to have a full-scale deflection for a current of 50 mA.
Current sensitivity (S) is the ratio of full-scale deflection current to full-scale deflection voltage.
S = I(fsd) / V(fsd).
S = 4.0 / 25
S = 0.16 mA/Ω
Desired current sensitivity for 50 mA (S(new)) = 50 mA / V(fsd)
(S(new)) = 50 mA / V(fsd)
(S(new)) = 50 / 0.16
(S(new)) = 312.5 Ω
Add External Resistor:
Add an external resistor (R(ext)) in series with the meter. Calculate R(ext) as the difference between R(new) and the internal resistance of the meter
(R(internal) = 25 Ω:
R(ext) = R(new) - R(internal)
R(ext) = 312.5 Ω - 25 Ω
R(ext) = 287.5 Ω
By adding an external resistor of 287.5 Ω in series with the meter, the conversion of the moving coil meter to have a full-scale deflection for a current of 50 mA. This will achieve the desired result.
To know more about the external resistor:
https://brainly.com/question/32843695
#SPJ3
A hair dryer transforms 10,000J of energy in 4s. What is its power?
Answer:
2500 WExplanation:
Power is the rate at which work is done and can be found by using the formula
[tex]p = \frac{w}{t} \\ [/tex]
p is power in Watts ( W)
w is the workdone in J
t is time in s
From the question
w = 10,000 J
t = 4 s
We have
[tex]p = \frac{10000}{4} = 2500 \\ [/tex]
We have the final answer as
2500 WHope this helps you
____________ is a medium-sized flat-topped hill with cliff-face sides that is taller than it is wide.
Answer:
mesa
Explanation:

A mesa is a flat-topped mountain or hill. It is a wide, flat, elevated landform with steep sides. ... Spanish explorers of the American southwest, where many mesas are found, used the word because the tops of mesas look like the tops of tables.
Is it raining anywhere else because it is about to start pouring where I live
Current Forecast is:
Sunny with a temp of 67 deg F, as of rn there is no clouds in the sky
Location, Oklahoma USA in the NE corner