What type of particles move to create electicity?
electrons
protons
neutrons

Explanation:

Physical properties of matte tells us everything about a substance when no change is occurring to its constituents.

Such properties are best observed with our senses. Also, physical properties can be observed using equipment in the laboratory or some apparatus.

Answer:

can you get a picture that is in higher quality? we can't read what it's saying

Answer:

Absolutely True :) cause we use it all the time

Land is a natural resource because it is used by living things to meet their needs. The given statement is true.

Natural resources are important commodities and are used on a global scale. This includes the extraction and purification procedures that allow for their usage in economic production or consumption. Land is a natural resource.

Natural resources can be either renewable (meaning there will eventually be more supply available after they are refilled) or non-renewable (meaning there won't be any more available supply to be harvested from once they run out). Land is a natural resource because it is used by living things to meet their needs. The given statement is true.

Therefore, the given statement is true.

To learn more about natural resource, here:

https://brainly.com/question/14665426

#SPJ6

Answer:

pH = 13.11

Explanation:

NaOH reacts with HCl to produce H2O and NaCl. pH depends of this reaction. The reactant in excess determine the pH of the solution:

NaOH + HCl → H2O + NaCl

1 mole of NaOH reacts with 1 mole of HCl

To determine limiting reactant we need to find moles of each reactant:

Moles NaOH:

0.011L * (0.800 mol / L) = 0.0088 moles NaOH

Moles HCl:

0.003L* (0.200mol / L) = 0.0006 moles HCl

That means limitng reactant is HCl and moles in excess of NaOH are:

0.0088moles NaOH - 0.0006 moles = 0.0082 moles NaOH =

0.0082 moles OH⁻

In 11.00mL + 50.00mL + 3.00mL = 64.00mL = 0.06400L

[OH-] = 0.0082 moles OH- / 0.064L = 0.1281M OH-

pOH = -log [OH-] = 0.89

pH = 14 - pOH

Answer:

λ = 4.46 x 10⁻⁷ m = 446 nm

Explanation:

Applying Law of Conservation of Energy in this condition, we will get the following equation:

Total Energy of Combined Photons = Energy of 1st Photon + Energy of 2nd Photon

hc/λ = hc/λ₁ + hc/λ₂

hc/λ = hc(1/λ₁ + 1/λ₂)

1/λ = 1/λ₁ + 1/λ₂

where,

λ = wavelength of combined photon = ?

λ₁ = wavelength of 1st photon = 853 nm = 8.53 x 10⁻⁷ m

λ₂ = wavelength of 2nd photon = 935 nm = 9.35 x 10⁻⁷ m

Therefore,

1/λ = 1/(8.53 x 10⁻⁷ m) + (9.35 x 10⁻⁷ m)

1/λ = (0.1172 x 10⁷ m⁻¹) + (0.1069 x 10⁷ m)

1/λ = 0.2241 x 10⁷ m⁻¹

λ = 1/(0.2241 x 10⁷ m⁻¹)

λ = 4.46 x 10⁻⁷ m = 446 nm

Answer:

446

Explanation:

The question is incomplete, the complete question is;

Which of the following aspects of biotechnology is Not considered to be a moral or ethical issue?

a.research and testing on animals

b.cloning living material

c.reducing research cost

d.damaging the environment

Answer:

c.reducing research cost

Explanation:

Ethical issues arise when a particular course of action is at odds with the generally acceptable moral standard in the society.

Research and testing on animals is contested as an ethical issue by animal rights activists.

Cloning living material  is prohibited among some sections of society and is also being contested as an ethical issue.

Damaging the environment the environment owing to biotechnology research is generally regarded as an ethical issue.

However, reducing research cost is highly acceptable in any research. It does not pose an ethical issue.

Answer:

Heat transferred in the process is 19019J

Explanation:

Using the equation:

Q = S×m×ΔT

We can solve the energy transferred in the process, Q, where:

S is specific heat = 4.18J /(g°C)

m is mass = 350g

ΔT is change in temperature (21°C - 8°C = 13°C)

Q = 4.18J/(g°C)×350g×13°C

Q = 19019J

Answer:

are there any options for us to choose from? or is it just fill in the blank

Waves of sound energy move in the form of vibration from the source of sound energy.

Waves is a kind of disturbance that can travel through a medium from one point to another point.

Sound waves is also a type of wave in which energy is travelled from one point to another point through the vibration from the source of sound.

Hence energy travel in the form of vibration.

To know more about sound energy, visit the below link:

https://brainly.com/question/388615

Answer:

ill help but i cant see the problem

Explanation:

Answer:

C

Explanation:

I did it on usatestprep

Answer:

Zinc (Zn) combines with hydrogen chloride (HCI) to form hydrogen gas(H2) and zinc chloride (ZnCl2).

[tex]\sf Zinc+Hydrogen\:Chloride \longrightarrow Hydrogen\:gas+Zinc\:Chloride[/tex]

[tex]\sf Zn+HCL \longrightarrow H_2+ZnCl_2 [/tex]

[tex]\sf Zn+2HCL\longrightarrow H_2+ZnCl_2 [/tex]

Answer:

Explanation:

Answer is C

Answer:

18.33 ×10²³ atoms

Explanation:

Given data:

Molar mass of sulfuric acid = 98.1 g/mol

Mass of sulfuric acid = 75.0 g

Number of of oxygen atom present = ?

Solution:

Number of moles of sulfuric acid:

Number of moles = mass/molar mass

Number of moles = 75.0 g/ 98.1 g/mol

Number of moles =0.761 mol

one mole of  sulfuric acid  contain four mole of oxygen atom.

0.761 mol × 4 = 3.044 mol

1 mole = 6.022×10²³ atoms of oxygen

3.044 mol ×  6.022×10²³ atoms of oxygen / 1mol

18.33 ×10²³ atoms

Answer:

This question is incomplete

Explanation:

This question is incomplete but the completed question is in the attachment below. To determine the net ionic equation, one must first write the complete equation which is shown below

LiNO₃ + NaC₂H₃O₂ ⇒  LiC₂H₃O₂ + NaNO₃

The ionic equation represented from the above equation will be

Li¹⁺ NO₃⁻ + Na¹⁺ C₂H₃O₂¹⁻  ⇒  Li¹⁺ C₂H₃O₂¹⁻ + Na¹⁺NO₃¹⁻

Because the resultant NaNO₃ formed is an ionic compound (which does not form a molecule), the correct option from the options provided is the first option

Answer:

2KClO3 —> 2KCl + 3O2

The coefficients are 2, 2, 3

Explanation:

From the question given above, we obtained the following equation:

KClO3 —> 2KCl + 3O2

The above equation can be balance as follow:

There are 2 atoms of K on the right side and 1 atom on the left side. It can be balance by putting 2 in front of KClO3 as shown below:

2KClO3 —> 2KCl + 3O2

Now, the equation is balanced.

Thus, the coefficients are 2, 2, 3

Explanation:  an ionic bond, is when a atom basically gives a electron to another, forms when one atom becomes stable by losing its outer electrons and the other atoms become stable by gaining the electrons covalent bonds form when sharing atoms results in the highest stability possible

Answer:

1s22s22p63s23p4

Explanation:

Sulfur is located in the p block and has 6 valence electrons (the 2 exponent on the 3s and the 4 exponent on the 3p add up to 6)

The location and energy of all the valence electrons of electrically-neutral sulfur ( S ) is 3s₂3p₄.

Chemical element sulfur has the letter S and atomic number 16. It is multivalent, nonmetallic, and plentiful. Sulfur atoms normally combine to create cyclic octatomic molecules, which have the chemical formula S8. At room temperature, elemental sulfur is a crystalline solid that is brilliant yellow.

In addition to being a fungicide and an ingredient in black gunpowder, sulfur is used to vulcanize black rubber. However, the majority of sulfur is utilized in the creation of sulfuric acid, which is arguably the most significant chemical produced by western civilisations.

Sulfur can be found naturally and in metal sulfide ores. Natively, it may be found close to hot springs and volcanoes.

Thus, option B is correct.

To learn more about sulfur, follow the link;

https://brainly.com/question/16829809

#SPJ5

Answer:

Glaciers moving rocks and soil through a valley

Explanation:

The definition of Erosion is "the process of eroding or being eroded by wind, water, or other natural agents". Which in turn means the movement of glaciers is causing erosion on the local valley.

the last one

Explanation:

Answer:

D. electrons

Explanation:

Chemical bonds occur as a result of electrons (negatively-charged subatomic particles) being transferred among atoms. The transfer happens when electrons are being stolen or shared from an atom to another. The reason behind this is because atom's atomic shells are naturally inclined to be full. Thus, if one atom has extra electrons, that atom will most likely share his electrons to another atom lacking in it.

If the volume of the system is decreased, no shift will occur

In the equilibrium system, according to Le Chatelier, if there is a reaction there will be action  

Reaction = - action  

The reaction taken by the system is to shift the reaction to the right or left.  

The composition of chemical reactions in equilibrium can be influenced by temperature, pressure, and concentration.  

While on the change in pressure(volume), then the addition of pressure, the reaction will shift towards a smaller reaction coefficient  ((the fewest moles of gas  )

This pressure usually affects the gas equilibrium system(only count the number of moles of gases)

Reaction

NO₂ (g)+CO (g)↔NO(g)+CO₂(g)

The reactant side of the equation has 2 moles of a gas(1 mole NO₂ and 1 mole CO) ; the product side has 2 moles (1 mole NO and 1 mole CO₂)

So the total number of moles from both sides is the same(2 moles) so that the change in volume (pressure) does not change the direction of equilibrium⇒No shift will occur

Answer:

Explanation:

The final pressure can be found by using the formula for Boyle's law which is

[tex]P_1V_1 = P_2V_2[/tex]

Since we are finding the final pressure

[tex]P_2 = \frac{P_1V_1}{V_2} \\[/tex]

From the question

58.6 kPa = 58600 Pa

We have

[tex]P_2 = \frac{58600 \times 250}{655} = \frac{14650000}{655} \\ = 22366.4122... \\ = 22366[/tex]

We have the final answer as

Hope this helps you

Answer:

B. Although both involve combining with oxygen, combustion is more rapid.

Explanation:

Both rusting and combustion involves are combination in which a substance reacts with oxygen.

Answer:

B. Although both involve combining with oxygen, combustion is more rapid

Explanation:

a p e x

Answer:

You would give four tablets of clopidogrel 75 mg/TAB STAT.

Answer:

4

Explanation:

pH scale of acidic is 4.

Answer: 4

Explanation:

Answer:

This question is incomplete

Explanation:

This question is incomplete. However, in order to calculate the percentage yield of an extraction/isolation, the formula to be used is below

percent yield = isolated mass/total mass × 100

The mass of the yield (which can also be referred to as isolated mass) was provided to be 0.15 g but the total mass of the (4-chlorophenyl)bis(4-methoxyphenyl)methanol was not provided.

In the completed question that has the total mass or the values to obtain the total mass, the formula mentioned earlier should be used.

Answer:

d = 1.53 g/mL

Object will sink into water

Explanation:

Given data:

Mass of object = 14.8 g

Initial volume of water = 25.0 mL

Final volume after adding object = 34.7 mL

Density of object = ?

Density of water = 1.00 g/mL

Solution:

Volume of object = Total volume - volume of water

Volume of object = 34.7 mL - 25.0 mL

Volume of object = 9.7 mL

Density of object;

d = mass/volume

d = 14.8 g /  9.7 mL

d = 1.53 g/mL

The density of water is 1.00 g/mL which means object is heavier than water thus object will sink into the water. The object with density less than water are float in it.

Answer:

TRUE!

Explanation:

The molarity of the unknown acid : 1.18 M

Titration is a procedure for determining the concentration of a solution by reacting with another solution that is known to be concentrated (usually a standard solution). Determination of the endpoint/equivalence point of the reaction can use indicators according to the appropriate pH range

Titration formula

M₁V₁n₁=M₂V₂n₂

monoprotic acid⇒n₁=1

NaOH monoprotic base⇒n₂=1

[tex]\tt M_1\times 15=1.25\times 14.16\\\\M_1=1.18~M[/tex]

Answer:

Detergent lowers the surface tension of water enough so that bubbles can form. ... Glycerin makes stronger, longer-lasting bubbles, but corn syrup is often substituted in bubble solutions because it is cheaper.

Explanation:

Hope this helps.

It reduces the [surface] tension of the water to form bubbles

Answer:

I think the answer is B

Explanation:

Answer:

oxygen atom is a unstable atom so it gets attached to other oxygen atom sharing valance electrons to become stable

C is the right ans