Answer:
The correct options are;
1) The ability to read blueprints
2) Knowledge of all building codes and safety regulations
3) Ability to use diagnostic equipment
4) Sophisticated understanding of welding
Explanation:
The tasks involved in the installation and repair of elevators includes
1) Diagnose problems with the use of testing equipment
2) Review the blueprints of the elevators to locate parts of the elevator that require repair
3) Completing the connection of electrical networks to equipment and control panels
4) Maintain records of elevator repair tasks and servicing
5) Find the location of a fault in the control systems, motors, switches or breaks of an elevator
6) Adjustment of elevator mechanisms and regulate safety systems
Hope this helps!!
zero is an integer?
Yes, 0 IS an integer.
brainliest pls
Answer:
Yes.....................How many meters is equivalent to a mile? Give your answer to the nearest meter.
Answer:
Around 1609 meters.
Explanation:
1609.3 meters rounded to 1609.
Which of the following is NOT an application for robotics
The options which are not an application for robotics are:
C. Outside exercise.
D. Kitchen appliances.
What is robotics?Robotics can be defined as a subfield of computer technology and engineering that typically deals with the design, development construction, operation, and application (use) of advanced computer systems known as robots, especially for the performance of certain tasks.
This ultimately implies that, outside exercise and kitchen appliances are not an application for robotics.
Read more on robotics here: https://brainly.com/question/10387419
#SPJ2
List the parts of a manual transmission
List the parts of a typical clutch assembly?
Answer:
Explanation: Clutch Plate.
Clutch Cover.
Clutch Bearing (Release bearing)
Release Fork (clutch fork)
When designers make compromises during the Engineering Design Process, this is called
O Additional criteria
O More constraints
O Increased efficiency
O A trade-off
Answer: A trade off
Explanation:
Criteria is simply a product's identified characteristics or elements. Constarints are the limitation to a product's design.
A trade off is a decision that's taken in order to gain a particular things at the expense of something else. A trade off is when designers make compromises during the Engineering Design Process.
Therefore, the correct option is D.
Task 1
Water is retained in a 1 m wide rectangular section channel by a sluice gate that can
pivot about its base, as shown below. Determine the total force on the gate due to the
water, the position where it is considered to act and the tension in the horizontal
retaining cable attached to the top of the gate when the depth of water in the channel
is 1.5 m. The density of water is 1000 kg/m3.
Cable tension = T
2 m
1.5 m
Pivot
Answer:
I dont understand your question.
Explanation:
What is the formula of color coding of resistance?
Answer:
R= [(numbers) × (multiplier) ± (tolerance (%) )]
Explanation:
PLEASE ANSWER ASAP!
when driving, what is the difference between the white lines and the yellow lines
Answer:
Please check the explanation.
Explanation:
While driving, white lines would require us to stay within the lane, also marking the shoulder of the roadway.
While yellow lines generally mark the center of a two-way road being used for two-way traffic.
We generally can pass on a two-way road if the yellow centerline is broken.
Answer:
Solid White Line: requires you to stay within the lane and also marks the shoulder of the roadway. YELLOW LINES mark the center of a two-way road used for two-way traffic. You may pass on a two-way road if the yellow centerline is broken.
Attempting to improve mobility for paralyzed people is an example of which of the following?
a. a hypothesis
b. applied research
c. basic research
d. the scientific method
Answer: B. applied research
Why might an insulation worker be necessary in the demolition phase of a reconstruction project?
They can eliminate the need for new insulation
They can verify that the old insulation was inadequate.
They can serve as general laborers for the project.
They can remove possibly toxic materials safely
Answer:
i think its the last one im not 100 tho
Which lists the order of Energy Career Pathways from the source to the customer?
A. Energy Generation, Energy Transmission, Energy Distribution
B. Energy Distribution, Energy Transmission, Energy Generation
C. Energy Generation, Energy Distribution, Energy Transmission
D. Energy Transmission, Energy Generation, Energy Distribution
Answer:
answer is A. EG,Et, and Ed
Explanation:
Answer:
(A) Energy Generation, Energy Transmission, Energy Distribution
PLEASE HELP
NASA scientists have determined that the chance a single person would get hit by a piece of falling satellite is one in 3,200. What can you infer based on this probability?
A. Satellites that enter Earth’s atmosphere land mostly in the ocean.
B. NASA does a good job informing people of when satellites will enter the atmosphere.
C. Satellites that enter Earth’s atmosphere land mostly in unpopulated areas.
D. Much of a satellite is destroyed during the process of entering Earth’s atmosphere.
Answer:
The Answer Is Much of a satellite is destroyed during the process of entering Earth’s atmosphere.
Explanation:
Right On Edge
The use of seat belts in cars has significantly reduced the number of crash
fatalities. Which statement best explains how societal demand guided the
development of seat-belt technology?
A. Engineers improved the design of seat belts because consumers
wanted them to be easier to use.
B. Car manufacturers recognized the dangers of not wearing seat
belts in cars and then lobbied the government to make laws that
required their use.
C. Engineers developed seat-belt technology and then began a public
awareness campaign to educate people on how they could be
used to make cars safer.
D. When new seat-belt technology became available, consumers
began to demand their inclusion in all new cars.
Answer:
A. Engineers improved the design of seat belts because consumers wanted them to be easier to use
The statement best explains how societal demand guided the development of seat-belt technology is A. Engineers improved the design of seat belts because consumers wanted them to be easier to use.
Seat-belts are important in order to reduce the impact of a person getting injured in case there's an accident.It should be noted that when seatbelts were first introduced, they were not easy to use and this was challenging for consumers.Due to the advances and new innovations by engineers, the design of seat belts has become easier to use. Even children can use seatbelts easily now.Therefore, engineers improved the design of seat belts because consumers wanted them to be easier to use.
Read related link on:
https://brainly.com/question/24196643
Witch measuring tool would be used to determine the diameter of a crankshaft journal
TIMED TEST!!!!!!!!!!!!What process that occurred in the Midwestern United States in the 1930s is now occurring in the Sahel region of Africa, south of the Sahara Desert?
Industrial pollution
Over fertilization of streams
Dust storms and desertification
Radioactive soil
Answer:
Dust Storms and desertification
Explanation:
I looked up the question and a lot of stuff about desertification came up
Visual aids are useful for all of the following reasons except
Answer:
B
Explanation:
their presence allows the speaker to take a rest from talking
I couldnt see the question
Who has good grades in school like A's B's dm me
Answer:
I do
Explanation:
Natalie solved the problem below incorrectly. Identify his error and justify your reasoning. −19+3x−11+2x=2 5x−19−11=2 5x−30=2 5x=−28 x=−5.6
Which symbol represents a DC power source in an electrical circuit?
A.
Image 1:
B.
Image 2:
C.
Image 3:
D.
Image 4:
Answer:
C. image 3
Explanation:
Answer:
Image 3
Explanation:
Correct on plato
Will give brainly
Flowcharts are really useful tools that can help you organize your programming ideas in a logical sequence. Maybe you’ve encountered them in other areas of your life without even realizing it! Think about your favorite book of all-time. Chances are that the author put a lot of time and care into planning it out. If you were hired to write a sequel to this book, what are some of the steps that you would take to write something equally as awesome? Describe them in the order in which you would do them, and be specific!
If I were to write a book I would write my steps down as in figuring out what I what to talk about. A lot of steps need to be taken when writing a book, first you need to know what your gonna write about, you need an outline for your story. You don’t need to have it all worked out, but it’s helpful to have a reasonable idea of the shape and direction of your book before you the actual writing begins. When writing a story I would recommend doing research, you’ll likely want to spend time in libraries absorbing everything you can about your subject. At some point after deciding upon what you will be writing and doing research you will need to write a rough draft. After your first draft you should go through and edit, fix anything that is in need of fixing and if you encounter writers block find yourself some inspiration. After your first draft you'll need a second drafter for you to apply your revisions and edits, the second draft is also a chance to address more granular questions about your writing. After you have completed all the steps you have finished!
This is everything I know about writing from ELA class.
Explanation:
If I were to create a book, I would list the steps I took to decide what to write about. When writing a book, there are many procedures that must be taken.
What is Flowcharts?First, you must decide what you are going to write about and create a plot plan. Although you don't have to have everything planned out, it helps to have a general sense of the structure and direction of your book before you start writing.
I would advise completing research before starting to write a narrative. You'll probably want to spend some time in libraries learning everything you can about your topic.
After selecting your topic and conducting research, A diagram that depicts a workflow or process is called a flowchart. Another definition of a flowchart is a diagrammatic description of an algorithm or a step-by-step process for solving a problem.
Therefore, If I were to create a book, I would list the steps I took to decide what to write about. When writing a book, there are many procedures that must be taken.
To learn more about Flowchart, refer to the link:
https://brainly.com/question/29317974
#SPJ3