How much power is used if a force of 35n is used to push a box a distance of 10 meters in 5 seconds ?
Answer:
pratyush the first boy984
There are 25 elements found in living things. How many of these elements are found in some organisms but not all?
1
6
19
25
Answer: 6
Explanation:
Of those 25 elements found in living things, 6 of them can be found in all of them. These 6 are very integral to life as when they combine, they make up cells, tissues and other body components.
These elements are: Carbon, Oxygen, Nitrogen, Hydrogen, Phosphorus and Sulfur. Their combinations can either create organic or inorganic compounds.
Answer:
19
Explanation:
i got 19... not sure if 6 is correct
Water is found as a solid, liquid, and gas on ____.
Select the correct answer.
Which of these factors will increase the speed of a sound wave in the air?
A. slowing down the movement of particles in the air
B. raising the temperature of the air
C. removing particles form the air
D. decreasing the kinetic energy of the air
E. stopping particle collisions in the air
Answer:
B
Explanation:
But molecules at a higher temperature have more energy.
Answer: B. Raising the temperature of the air
a 45 kg boy sits on a horse on a carousel 5.0 m from the center of the circle. he makes a revolution every 8.0 s.
calculate his speed.
what is centripetal force acting on the boy?
Answer:
2.9m/s and 140N
Explanation:
For speed convert rev/s to m/s
(Rev/8s)=(2π/8)(5m) = 3.9m/s
For Centripetal Force
Fc = (ac)(m) = (v^2/r)(m) = [(3.9m/s)^2/(5.0m)][45kg] = 140N
Answers go to two significant figures.
Which of the following is NOT a possible type of law that a government could pass to help fight climate change?
1. Making greenhouses gas production illegal
2. Regulating the amount of greenhouse gases businesses can produce
3. Funding research on technologies that are better for the environment than those we currently use
4. Providing tax incentives for businesses and people to take action
Answer:
4
Explanation:
because people could lie about it
9 The friction between the car and the mud is equivalent to the__________________.
(a) Resultant force
(b) Drag force
(c) Equivalent force
(d) Stretch force
(e) None
Q3) Salman walks to the mosque with speed 2.4 m/s. If it takes him 3 min to
reach the mosque. Find the distance.
Answer: 432m
Explanation:
Convert 3 min to seconds
1 min = 60 sec
3 min = 180 sec
Multiply the speed times time to get distance.
2.4 x 180 = 432m
Two identical plastic cups contain the same amount of water at two different temperatures, as shown to the left. Both cups are placed in a room at 25° Celsius. At the time cups were placed in the room, in which cup do the water molecules have higher average kinetic energy? ( Cup 1 © Cup 2
Answer:
the molecules will begin to move slowly and will turn to ice
Explanation:
hope this was good or not not sure if am right but yeah
what is happening in terms of matter and energy, while wood burns?
Answer:
The law of conservation of mass states that matter cannot be created or destroyed in a chemical reaction. For example, when wood burns, the mass of the soot, ashes, and gases, equals the original mass of the charcoal and the oxygen when it first reacted. So the mass of the product equals the mass of the reactant
List two examples of how the land can have a dramatic change in temperature throughout the day.
Answer:
one could freeze and the second would thaw
Explanation:
sorry if its wrong
The two examples of how land can have a dramatic change in temperature
is during freezing and thawing.
Cold temperatures which is common during the winter period is
characterized by the formation of snow and freezing of smaller water
bodies.
There may be a short phase in which there is relative sunlight which melts
the frozen substances thereby forming liquids . This is usually as result of
the temperature being on the increase in the atmosphere.
Read more on https://brainly.com/question/25671319
If you want to delay a pulse of light in a laser experiment, you can send the light through a long coil of fiber optic cable. Light travels somewhat slower in the glass core of a fiber than it does in vacuum. We will approximate the speed of light in the fiber as 2.04 x 108 m/s. What length of fiber (in meters) should you use if you want to delay the arrival of light by 557 ns
Answer:
d = 113.6 m
Explanation:
For this exercise, the first thing we must notice is that the speed of the laser beam in the fiber is constant, so we can use the uniform motion relationships to find the necessary distance
v = d / t
let's reduce to SI units
t = 557 ns = 557 10⁻⁹ s
d = v t
d = 2.04 10⁸ 557 10⁻⁹
d = 1.136 102 m
d = 113.6 m
This is the distance of the fiber for the laser to arrive with the desired delay
Three displacements are A = 200 m due south, B %3D 0 m due west, and C = 150 m at 30.0° cast of north. %3D Construct a separate diagram for each of the following possible ways of adding these vectors: R = A +B - č, Explain what R = B + C + A; R =C + B + A %3D you can conclude from comparing the diagrams.
Answer:
a) The diagrams can be seen in the picture attached
(b) By comparing the diagrams we can conclude that the resultant R₁ = R₂ = R₃
Further explanation
Vector is quantity that has magnitude and direction.
One example of a vector is acceleration.
Acceleration is rate of change of velocity.
a = acceleration ( m/s² )
v = final velocity ( m/s )
u = initial velocity ( m/s )
t = time taken ( s )
d = distance ( m )
Let us now tackle the problem !
This problem is about Vector and Vector Diagram.
Given:
Vector A = -200 j
Vector B = -250 i
Vector C = (150 sin 30.0°) i + (150 cos 30.0°) j = 75 i + 75√3 j
Unknown:
R₁ = A + B + C = ?
R₂ = B + C + A = ?
R₃ = C + B + A = ?
Solution:
R₁ = A + B + C = (-200 j) + (-250 i) + (75 i + 75√3 j)
R₁ = -175i + (75√3 - 200)j
R₂ = B + C + A = (-250 i) + (75 i + 75√3 j) + (-200 j)
R₂ = -175i + (75√3 - 200)j
R₃ = C + B + A = (75 i + 75√3 j) + (-250 i) + (-200 j)
R₃ = -175i + (75√3 - 200)j
From the results above, it can be concluded that the resultants above produce the same results. This can be confirmed from the diagrams in the attachment.
Explanation:
A particular inductor is connected to a circuit where it experiences a change in current of 0.8 amps every 0.10 sec. If the inductor has a self-inductance of 2.0 V, what is the inductance
Answer:
0.4
Explanation:
Given that a particular inductor is connected to a circuit where it experiences a change in current of 0.8 amps every 0.10 sec. If the inductor has a self-inductance of 2.0 V, what is the inductance
Using the power formula
P = IV
Substitute all the parameters
P = 0.8 × 2
P = 1.6 W
But P = I^2 R
Substitute power and current
1.6 = 0.8^2 R
R = 1.6 / 0.64
R = 2.5 ohms
Inductance = reciprocal of resistance
Inductance = 1 / 2.5
Inductance = 0.4
A bicycle has a momentum of 36 kg•m/s and a velocity of 4 m/s. What is the mass of the bicycle?
Answer:
45kw45_32+675&453try to get it done
Answer:
A: 9 kg
Explanation:
on edge! hope this helps!!~ ∩(︶▽︶)∩
(BRAINLIEST)
Which is an example of the force of attraction between two objects that have mass?
Magnetism
Gravity
Solar energy
Electricity
(BRAINLIEST)
Answer:
Gravity
because it's factorised by mass of a body.
For other forces, they deal with charges of negligible mass and weights
Answer:
Gravity
Explanation:
True or False: A cheetah, that has a mass of 40 kg, must exert a bigger force to change directions than a 15 kg gazelle because the cheetah has a greater mass
How far will a 10N force pull a car if the work done is 20J?
Delaney loves her new kiddie pool, but she is afraid to get wet. She crawls around the outside of the pool for hours. Jocelyn says Delaney is making rotations around the pool and Jonathan says Delaney is making revolutions around the pool. Who is correct? Suppose your answer with evidence.
Answer:
Revolutions
Explanation:
A rectangular block weighs 240 N. the area of the block in contact with the floor is 20 cm2.calculate the pressure on the floor(give your answer in N/cm2
Help me Fast as you can,,
Answer:
12 N/cm²
Explanation:
From the question given above, the following data were obtained:
Weight (W) of block = 240 N
Area (A) = 20 cm²
Pressure (P) =?
Next, we shall determine the force exerted by the block. This can be obtained as follow:
Weight (W) of block = 240 N
Force (F) =.?
Weight and force has the same unit of measurement. Thus, we force applied is equivalent to the weight of the block. Thus,
Force (F) = Weight (W) of block = 240 N
Force (F) = 240 N
Finally, we shall determine the pressure on the floor as follow:
Force (F) = 240 N
Area (A) = 20 cm²
Pressure (P) =?
P = F/A
P = 240 / 20
P = 12 N/cm²
Therefore, the pressure on the floor is 12 N/cm².
let's say you hypothetically ran over someone with your car, and they are now under your car in between the front wheels and the back wheels, right, and they're stuck as in can't breathe type stuck, right, do you keep driving so they can breathe or do you let them chill under your car?
just curious...
question: is this actually hypothetical?
Explanation:
also just leave the car there go get some McDonald's or sum and come back and if they're still breathing then go ahead and move the car .
Answer:
the same thing the last guy said
a ball of diameter 10 cm and mass 10 grams is dropped in a container of water. the cross sectional area of the container is 100 cm2.. what is the change in the height of the water column
Answer:
h = 9.83 cm
Explanation:
Let's analyze this interesting exercise a bit, let's start by comparing the density of the ball with that of water
let's reduce the magnitudes to the SI system
r = 10 cm = 0.10 m
m = 10 g = 0.010 kg
A = 100 cm² = 0.01 m²
the definition of density is
ρ = m / V
the volume of a sphere
V = [tex]\frac{4}{3} \ \pi r^{3}[/tex]
V = [tex]\frac{4}{3}[/tex] π 0.1³
V = 4.189 10⁻³ m³
let's calculate the density of the ball
ρ = [tex]\frac{0.010}{4.189 \ 10^{-3} }[/tex]
ρ = 2.387 kg / m³
the tabulated density of water is
ρ_water = 997 kg / m³
we can see that the density of the body is less than the density of water. Consequently the body floats in the water, therefore the water level that rises corresponds to the submerged part of the body. Let's write the equilibrium equation
B - W = 0
B = W
where B is the thrust that is given by Archimedes' principle
ρ_liquid g V_submerged = m g
V_submerged = m / ρ_liquid
we calculate
V _submerged = 0.10 9.8 / 997
V_submerged = 9.83 10⁻⁴ m³
The volume increassed of the water container
V = A h
h = V / A
let's calculate
h = 9.83 10⁻⁴ / 0.01
h = 0.0983 m
this is equal to h = 9.83 cm
Help!! Help!!
Alcohol __ a person's respiration.
A. slows down
B. Increases
C. doesn't affect
Answer:
I think the answer is A. Slow down
Explanation:
how are hydrosphere, atmosphere, Biosphere, and Biosphere connected to one another
Explanation:
Such spheres are intimately connected. Many animals (biosphere), for example, migrate through to the sky, while groundwater (hydrosphere) also flows through the ground (lithosphere). The domains are actually so closely related that a shift in one globe always results in a shift in one or both of some other spheres.
What is the relationship between force and momentum?
A. A force will always increase momentum
B. A force acting for a certain time results in a change in momentum
C. There is no relationship
D. It depends on the kind of force
Answer:
Explanation:
B
Optimus Prime is flying straight up at 24 m/s when he accidentally drops his mega-ray blaster and it falls 94 m to the ground below. Calculate how long it takes for his mega-ray blaster to hit the ground.
Answer:
The time it will take the mega-ray blaster to hit the ground is 2.57 s.
Explanation:
Given;
initial velocity of Optimus Prime, u = 24 m/s
height of fall of the mega-ray blaster, h = 94 m
The time of fall of the mega-ray blaster is calculated using the following kinematic equation;
[tex]h = ut + \frac{1}{2}gt^2\\\\94 = 24t + \frac{1}{2}(9.8)t^2\\\\94 = 24t + 4.9t^2\\\\4.9t^2 +24t -94 = 0\\\\Use \ formula \ method \ to \ solve \ for \ "t"\\\\a = 4.9 , b = 24, c = -94\\\\t = \frac{-b \ +/- \ \sqrt{b^2 -4ac} }{2a} \\\\t = \frac{-24 \ +/- \ \sqrt{(24)^2 -4(-94 \times4.9)} }{2(4.9)} \\\\t = \frac{-24 \ +/- \ \sqrt{2418.4} }{9.8}\\\\t = \frac{-24 \ +/- \ 49.177 }{9.8}\\\\t = \frac{-24 \ +\ 49.177 }{9.8} \ \ or \ \ t = \frac{-24 \ -\ 49.177 }{9.8} \\\\[/tex]
[tex]t = 2.57 \ s \ \ or \ \ t = -7.47 \ s[/tex]
t = 2.57 s
Therefore, the time it will take the mega-ray blaster to hit the ground is 2.57 s.
which is true about the way air flows
A. high pressure to low pressure
B. low pressure to high pressure
C. cold air to hot air
D. hot air to cold air
Answer:
A High-to-Low
Explanation:
its like water running down a hill.
A 420 g soccer ball is kicked into the air with an initial velocity of 30 m/s. How much kinetic energy does the soccer ball have?
Answer:189000J
Explanation:KE=1/2mv^2
1/2(420g)(30m/s)^2
=189000J
A 1.5kg object moving with a speed of 2.5m/s strikes a wall and the ball rebounds with a speed of 1.5m/s. The ball is in contact with the wall for 0.045s. What is the magnitude of the average force exerted on the ball by the wall?
Answer:
F = 133.33[N]
Explanation:
This problem can be solved by the principle of momentum conservation, which tells us that momentum is preserved before and after the bounce of the ball on the wall.
In such a way that the movement towards the wall we will take it with a positive sign, and the force of the rebound to the left as negative. The movement to the left will be taken as a negative sign.
[tex]m_{1}*v_{1}-F*t=-m_{1}*v_{2}[/tex]
where:
m₁ = mass of the object = 1.5 [kg]
v₁ = velocity of the ball before hitting the wall = 2.5 [m/s]
F = average force [N]
t = time contact = 0.045 [s]
v₂ = velocity of the ball after hitting the wall = 1.5 [m/s]
Now replacing:
[tex](1.5*2.5)-F*0.045=-(1.5*1.5)\\3.75+2.25=F*0.045\\F=6/0.045\\F=133.33[N][/tex]
A water molecule has 2 hydrogen atoms and 1 oxygen atom. If you were to add an additional oxygen atom to the molecule, would it still be water? If not, what would it be?
Answer:
No, it would not still be water. it would be hydrogen peroxide
Explanation:
water is [tex]H_{2} O[/tex]. Adding another oxygen would make it [tex]H_{2} O_{2}[/tex], which is hydrogen peroxide
Answer:
It would be Hydrogen peroxide
Explanation:
Atoms actually prefer being configured as water (H2O). Adding on the extra oxygen takes a lot of energy (and other chemicals). That's why we see lots of water and not much hydrogen peroxide around in nature. The reason hydrogen peroxide (H2O2) is dangerous is because it actually wants to drop off that extra oxygen and become water. Anything that does this is called an oxidising agent. An oxygen atom on it's own is pretty unstable and really wants to snatch up electrons from somewhere. First it'll probably gobble up some free floating hydrogen and make some more water with it. In our bodies we don't have much free floating hydrogen, so it runs out pretty quick. The oxygen atom army then has to start breaking up bigger molecules to steal the hydrogens and sometimes even the nitrogens. This breaks up the molecules that form the structures of your body and leaves you with a jumble of random configurations of atoms where the oxygen atoms passed through. Now, before you ask, normally oxygen doesn't do it to you because it exists in the air as O2, bonded to itself. The isolated oxygen atoms only exist for a brief time after they've split up from the hydrogen peroxide.